FORMING AND

SHORING SYSTEMS

over 90 years of experience and quality products

MASCO
MAS ONS S U P P L Y

MASONS SUPPLY COMPANY | WWW.MASCO.NET

Oregon (800) 537-3407 Washington (800) 537-6216
Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland
Port Orchard | Ridgefield | Salem | Seattle | Tacoma | Wilsonville | Woodinville

OVER 90 YEARS

OF EXPERIENCE AND QUALITY PRODUCTS...

MASCO
TABLE OF CONTENTS

M ASO NS SUPPLY

DETAIL & DRAFTING.......................................... 2-3

VERTICAL FORMING SYSTEMS........................ 4-31
FRAMAX XLIFE....................................................4-5
FRAMI..................................................................6-7
MF 240 CLIMBING FORMWORK........................8-9
ALISPLY.........................................................10-13
STEEL PLY.......................................................14-15
ALUMINUM BEAM GANGS.................................16
WONDERWALE SYSTEM.................................17-19
ELEVATOR SHAFT FORMING..........................20-21
FLEX-FORM....................................................22-23
ADJUSTABLE RADIUS WALER..............................24
FORM LINER.........................................................25
MAX-A-FORM...............................................26-27
ROLL BACK..........................................................28
JOB BUILT.............................................................29
BRACES................................................................30
TILT-UP..................................................................31
HORIZONTAL FORMING
AND SHORING SYSTEMS.............................. 32-41
DECKFAST.....................................................32-33
HV-DECK/PANEL SYSTEM..............................34-35
MEGA SHORE.................................................36-37
SHORING STEEL...................................................38
POST SHORES.......................................................38
SOLDIER BEAM....................................................39
OVERHANG BRACKETS......................................40
SAFETY RAIL BRACKETS.......................................41
COLUMN FORMING..................................... 42-47
STEEL PLY............................................................42
ADJUSTABLE STEEL..............................................43
MAX-A-FORM....................................................44
CIRCULAR STEEL..................................................45
LOCKFAST COLUMN CLAMP.............................46
LOK'N SQUARE COLUMN CLAMP.....................47
CUSTOM MANUFACTURING.............................. 48
PRE-ASSEMBLY.................................................... 49
PRODUCT INFORMATION................................... 50
FORMING FACILITIES.......................................... 51

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

MASCO

MASONS SUPPLY

M A SO NS SUPPLY

WE SERVE PROFESSIONAL TRADES ONLY

Masons Supply Company offers the
largest inventory of concrete and
masonry accessories in the Northwest.
With the addition of concrete forming
systems, for sale and rent, Masons is the
source for all your concrete needs.

accessories to fit any job requirements.

Our two full service distribution centers
make it possible to pre-assemble
forming systems for delivery anywhere
in North America, Canada, Alaska,
Mexico and the Pacific Rim.

Masons has two major distribution

facilities located in Portland, Oregon
and Woodinville, Washington. We also
have twelve warehouse outlets and one
large multi-function concrete forming
and shoring facility in Ridgefield, WA.

Masons provides products to contain

and enhance the designed properties
of liquid concrete while it hardens. We
also provide products and technical
service for the repair, restoration and
protection of existing concrete with
the most efficient economical and
technologically advanced products
and services available.

Our forming and shoring facilities offer

and stock the best selection of concrete
forming and shoring systems in the
western United States. Modular hand
set panels, all steel faced panels, all
steel round and radius forms, aluminum
beam, European clamp systems, ply
wood faced gang forms for straight
and radius walls. All steel or aluminum
tube frame shoring systems. Hand
set plywood forming systems are also
available. Masons has forming systems
for all heavy and light requirements.
Our forming department can also
manufacture custom tailored forms and

Today Masons is the premier specialty

company for concrete and masonry
product in the Northwest. Our only
business
is
servicing
professional
contractors on all commercial, industrial
and infrastructure projects.
Masons Supply Company, a locally owned
and operated business, is growing with the
Northwest to better serve our customers.
Were proud of our history and reputation
for excellence.

EXPERTISE

PROBLEM SOLVING

MULTIPLE LOCATIONS

FAST DELIVERY

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

DETAIL & DRAFTING

MASCO
MASON S S UPPL Y

DETAIL & DRAFTING

Having top quality products is only part of Masons story.

We have the service and expertise to help you get your
job done on time and on budget. Masons factory
trained specialists work with your project personnel every
step of the way.
When you need building materials and forming systems,
Masons can help you select the best products for your
requirements and offer on-site technical assistance, as
well as specialized equipment.
Our experienced drafting and sales staff, complete
with multiple autocad stations, are available to prepare
clear and accurate computer generated sales lay-out
and detail drawings to fit your projects' requirements.
Before you turn the first shovelful of dirt, Masons can be
on site, unloading geotextile fabric and safety fence. Our
forming department can put the final drawing together
on your concrete forming layouts. Masons delivers only
the best nationally recognized products, and we get it to
you on time.
Masons has made the investment in distribution facilities,
inventory and trucks to ensure you get what you need
when you need it. Masons is committed to supplying
professional contractors with the best service and
products available.

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

FRAMAX XLIFE

VERTICAL FORMING SYSTEMS

Framax Xlife is a framed formwork system

that was developed specially to meet US
formwork requirements. It is used for gang
forming using the crane. Framax Xlife
assembles using only a hammer and two
lightweight clamps. Gang assembly can
easily approach 100 sq. ft. per man-hour.
Xlife plywood gives an excellent finish and
lasts two times longer then all birch plywood.
Modular and symmetrical panels ensure
the best possible utilization of formwork.
The special pattern of holes makes these
panels ideal for the economical forming
of outside corners, wall connections,
bulkheads & columns.

FRAMAX XLIFE

Straight comparison shows

that Framax Xlife nails much
better than conventional
formwork panels.

COLUMN FORMWORK MADE UP OF

FRAMAX XLIFE UNIVERSAL PANELS

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

CASCADE GRAIN ETHANOL PLANT CLATSKANIE, OR

CLIFFSIDE MODERNIZATION PLANT, NORTH CAROLINA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

FRAMI

VERTICAL FORMING SYSTEMS

Frami is a lightweight clamp system

designed in feet and inches. It is comprised
of high-performance safety and workplace
accessories. It is the complete system for
walls, columns and footings. The Frami
panels are lightweight and easy to handle,
so they can be erected very quickly by
hand. Frami lets you form extremely quickly
and economically, without the use of a crane.
On sites with a crane, it is also possible to lift
several panels at a time, in a gang-form. The
ingenious modular design (with six different
widths and three different heights of panel)
makes for optimum adaptability to all job
site conditions.

FRAMI TIE HOLE PROTECTION

The ingenious modular design gives you

unlimited possible combinations, in both
width and height. You can use the panels
either upright or horizontal, and the
6" increment together with the steel fillers
(2", 1", 1") gives you optimum adaptability
of the formwork to the dimensions of the
structure, at all times.

FRAMI TIES

Frami uses a
lightweight
high strength
taper tie 1"-"
with " ends.

STURDY, TORSION-RESISTANT STEEL FRAMES

FRAMI CAN BE USED FOR COLUMNS

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

QUICK PANEL CONNECTION

Save time in assembly with only 3 lightweight
Frami clamps per 9 ft. vertical joint. Just one
blow with a hammer and the panels are
jointed and aligned.

GRAND MOUNT WASTEWATER TREATMENT PLANT WASHINGTON

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

MF 240 CLIMBING FORMWORK

VERTICAL FORMING SYSTEMS

The MF 240 is the crane-lifted climbing

formwork for structures of any shape and
any angle of inclination. Designed with
a high load-bearing capacity, it is built
for precision construction and efficient
operations on all high-rise building and
high wall applications. Components are
available to accomodate any angle of
wall inclination.
Formwork and climbing scaffold are
connected to each other, so the entire unit
can be raised in a single crane lift, reducing
crane time to an absolute minimum.

RIVERPLACE - CHICAGO, ILLINOIS

The MF 240 Climbing Formwork is ideal

for all residential and industrial high-rise
projects, bridge piers, silos, and any high
multi lift structures.

WORKING WITH MF 240

Strong and durable anchor components
ensure the secure connection between
structure and climbing formwork.

Caption

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

MF 240 CLIMBING FORMWORK

1

The main operating deck platform is 8' wide for

safe and convenient formwork operations.

The formwork can roll back 2'-6" for easy

cleaning of the formwork and for working on
the reinforcement.

MF CLIMBING BRACKETS

Combines with all DOKA wall formwork systems.

High load-bearing capacity 11,250 lbs. per

climbing bracket.

Accessories available to accomodate an

angle of inclination 15 from vertical.

Enables climbing formwork to pass concrete

lips projecting up to 9-".

WORKING PLATFORM BRACKETS

Modular principle for versatility:

These brackets can be used as pouring,

intermediate and suspension platform
brackets.

ADJUSTABLE ANGLE OF INCLINATION

On structures with vertical
walls, the MF 240 climbing
bracket permits pouring
sections up to 20' high.

Pressure spindles are available to

enable the MF 240 climbing formwork
to adjust to structures with an angle of
inclination that changes for each lift.

When the structure's angle

of inclination is constant,
pressure struts keep the
formwork at exactly the right
angle up to 15 when using
the vertical profile MF 160.

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

VERTICAL FORMING SYSTEMS

MF TRAVELING UNITS

MASCO
M A SO NS SUPPLY

ALISPLY

VERTICAL FORMING SYSTEMS

The Alisply system is a high strength

concrete forming system designed for fastpaced gangform operations. The clamp
style connections make setting up gangs
fast and efficient. Alisply has a long
service life and reduces your total applied
forming costs.
Alisply forms can be oriented horizontally
or vertically, even within the same gang.
Alisply panels and fillers provide strength,
durability and the finish needed for most
gangforming applications.

90 DEGREE CORNERS

10

FORT LEWIS, WA

CAPITAL MALL - SALEM, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

MCGUIRE RESERVOIR - CARLTON, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

11

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO

VERTICAL FORMING SYSTEMS

M A SO NS SUPPLY

SEATAC, WA

AS HIGH WALL POURS

12

EASTSIDE C.S.O. - SWAN ISLAND

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

ALISPLY (continued)

9' - 10"
(3M)

VERTICAL FORMING SYSTEMS

EASTSIDE C.S.O. - SWAN ISLAND

3' - 3"
(LM)

100x300

100x300

HAWKS PRAIRIE WWTP - LACEY, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

13

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO

HAND SET

M A SO NS SUPPLY

STEEL-PLY
VERTICAL FORMING SYSTEMS

Steel-Ply is today's superior handset. The

reusable, modular, high-carbon reinforced steel
frame means edges stay straight and corners
stay square, so panels are quickly aligned and
easily stacked. The system is sold and rented
for use in the forming of concrete walls and
columns.
All these factors combine to create a 1,000 psf
rated system that will save you time in setup,
last longer and give you better results.

FOUNDATION - ALBANY, OR

Panels and Fillers

There are 80 sizes available for fast erection of
virtually any layout by combining panel and
filler sizes for erecting vertically or horizontally.
This eliminates the sawing, drilling, measuring
and nailing common with job-built forming.
Steel-Ply provides quick and easy handling, no
tops, bottoms, lefts or rights making for improved
labor productivity.

HANDSET WALL FORMING

DETENTION VAULT - WOODINVILLE, WA

14

RETAINING WALL - BEAVERTON, OR

SHEAR WALL - TROUTDALE, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

GANGED STEEL-PLY

The versatility of the Steel-Ply system lends itself to gang forming

crane set applications using wood, steel or aluminum channels for
waling and threaded rod or round wire tie systems for tieing.

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

PULP MILL - LONGVIEW, WA

CONCRETE TANKS & RINGWALLS

RING WALL - ANACORTES, WA

WWTP - LYNDEN, WA

The productivity of the system for forming

round radius tanks and walls is unmatched
both in speed and weight as well as ease
of erection and stripping.

PUMP STATION - ISSAQUAH, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

15

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

ALUMINUM BEAM GANGS

VERTICAL FORMING SYSTEMS

The Aluminum Beam Gang Form System offers

unsurpassed forming versatility and a host of
unique features, benefits and advantages.
At the heart of this system is our computeroptimized aluminum beam featuring an
extremely high strength-to-weight ratio.
The Aluminum Beams or Joists are fastened
to steel or aluminum walers by means of our
unique beam attachment clamps. A suitable
plywood is attached to the resulting rigid,
compact and lightweight lattice to create
the basic gang form. The use of any of the
accessories available enhance the versatility
of the Aluminum Beam Gang Form to achieve
a wide range of forming conditions.

MIDDLE SCHOOL - SALEM, OR

Because Masons has several aluminum beam

and waler sizes and three capacities of ties
available for use on the Aluminum Beam Gang
Form, a wide variety of beam spacings and tie
patterns can be utilized.

DAM - BONNEVILLE, WA

DIGESTER TANK - VANCOUVER, WA

16

HIGH SCHOOL - VANCOUVER, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

WONDERWALE SYSTEM
VERTICAL FORMING SYSTEMS

WWTP - SEATTLE, WA

The system that bridges the gap between

all-wood forms and all-steel panels combines
the best of both worlds into one modular
package. The system merges the versatility
of dimensional lumber, aluminum joists, or
LVL lumber. In addition, it is lighter weight
per square foot and it has simplicity of on site
modification, large tie spacing, modularity
and ease of accessory attachment of steel
forms. The welded end plate and 6 bolt full
moment connection eliminates loose splice
channels and reduces hardware. The double
6" channel webs are punched on 3" centers,
and the flanges are drilled on 12" centers to
provide for positive connections and accessory
attachments.

TACOMA NARROWS BRIDGE

LIBRARY - CORVALLIS, OR

SHEAR WALL - PORTLAND, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

17

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

VERTICAL FORMING SYSTEMS

WONDERWALE SYSTEM

TACOMA NARROWS BRIDGE - TACOMA, WA

18

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

ANCHOR BLOCK FORMWORK - TACOMA NARROWS BRIDGE - TACOMA,WA

6 EACH " 2" SPEED

BOLT AND NUT

DBL. C6 PAFCO WALE

PAFCO C6 WALE CONNECTION

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

19

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

ELEVATOR SHAFT FORMING

VERTICAL FORMING SYSTEMS

The retractable inside corners will allow the four

inside forms of a stair or elevator shaft to move
as one unit. The Safety-Platform will support the
weight of the forms and workmen while the
stripping procedure is completed.
The collapsed inside shaft forms and platform
are moved up together to the next lift position
in one unit. When the platform locks into
place at the next lift position, the crane can
be released.

HORIZON HOUSE - SEATTLE, WA

The workmen can then expand the inside form

at the collapsible inside corner.

20

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

COURTHOUSE - EUGENE,OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

21

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

FLEX-FORM

VERTICAL FORMING SYSTEMS

Flex-Form is a system designed to meet

engineers specific needs for concrete
placement.
Flex-Form gives you all the strength and
versatility you need. Having 4" deep vertical
stiffeners with a 3/16" steel skin plate provides
a 1,000 psf system that handles any radius 5'
and over.
Pre-Rolled Steel Ribs Set the Radius
Factory-rolled top and bottom ribs bolt to
flexible panels to shape and securely hold the
form in the radius you require. Panels conform
precisely to the radius of the ribs - this design
assures that you'll get the correct radius every
time. And with a straight rib, you can produce
a straight wall if needed.

HIGH SCHOOL - SEATTLE, WA

Fast and Simple Erection

Panels are delivered to the job site
pre-assembled to your required radius. There
are no expensive templates to build; no need
to torque bolts; just begin erection labor.

INDUSTRIAL TANK BASE - ALBANY, OR

DIGESTER TANK - CORVALLIS, OR

22

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

VERTICAL FORMING SYSTEMS

DIGESTER TANK - CORVALLIS, OR

WWTP - WOODBURN, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

23

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO

PRE-ROLLED ADJUSTABLE STEEL WALERS

M A SONS SUP PLY

ADJUSTABLE RADIUS WALER

VERTICAL FORMING SYSTEMS

The Pre-Rolled Adjustable Steel Walers used

horizontally with vertical aluminum joists or wood
joists to form round tanks and curved walls.
Features:
Pre-Rolled to 45'-0 radius
Adjusts down to 30'-0 radius
Adjusts out to 80'-0 radius
All Hardware ATTACHED

24

CLARIFIER TANK - WILSONVILLE, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MAS O N S SU P P L Y

FORM LINER
VERTICAL FORMING SYSTEMS

Masons offers a complete line of Form Liner,

including plastic and elastomeric products
for use in the forming of textured surfaces
in concrete.

TRANSIT CENTER - BEAVERTON, OR

Dura-Tex

SPS Plastic

SPS PLASTIC

SPS Plastic Form Liner is manufactured from

polystyrene plastic and thermoformed to provide the
contractor with an inexpensive alternative for single
use applications. It provides a textured concrete
surface, in a limited application, at an affordable
price. SPS Plastic Form Liner has been particularly
useful in tilt-up construction because a major portion
of the work calls for a single use material.
ABS Plastic

ABS PLASTIC

DURA-TEX

Dura-Tex Form Liner is a medium use elastomeric

form liner. It possesses all the qualities of premium
elastomeric form liner, but is slightly less durable.
Dura-Tex Form Liner is ideal for projects that require
about 40 reuses. The ruggedness and tear strength
of Dura-Tex Form Liner allows stripping from complex
designs without causing damage to the form liner
material or the architectural concrete.
Elasto-Tex

ABS Plastic Form Liner is made from premium quality ABS

material that provides superb durability and excellent
overall performance. ABS Plastic Form Liner exhibits
good impact resistance and contains an ultraviolet
shielding compound to reduce the damaging effects
of prolonged sunlight. ABS Plastic Form Liners are
available in patterns that provide wood, rib, fractured
rib, brick and many other textures.

ELASTO-TEX

Elasto-Tex Liner is a pure urethane material that

provides consistent pattern reproduction, even after
many uses. The applied cost of Elasto-Tex Form Liner
becomes a distinct advantage for those projects that
require 100 uses and more.

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

25

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO

WALL & COLUMN FORMING

M A SO NS SUPPLY

MAX-A-FORM
VERTICAL FORMING SYSTEMS

The all steel, self-spanning, forming system for

bridge pier cap applications. The Max-A-Form
system combines a 3/16" steel face with heavy
duty steel crossmembers to support higher
pour rates. Panels up to 8' wide are rated at
1,500 psf, 9' and 10' are 1,200 psf and 12' wide
panels at 1,000 psf. The strength of this design
virtually eliminates the need for walers and
dramatically reduces tie requirements.

UNIVERSITY - SALEM, OR

PIER CAPS
LIGHT RAIL - PORTLAND, OR

INTERCHANGE - BELLEVUE, WA

26

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO

BRIDGE & HIGHWAY COLUMN FORMS

MASON S S UPPL Y

MAX-A-FORM (continued)
VERTICAL FORMING SYSTEMS

MAX-A-FORM is a gang form system that

allows faster placement, pours and resetting.
The strong, all-steel design allows forms to be set
in larger units. Fewer crane picks are necessary
and cycling time is optimized on repetitious
pouring applications. Gang size is limited only
by available crane capacity.
BRIDGE PIER - TACOMA, WA

INTERCHANGE - BELLEVUE, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

27

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

ROLL BACK
VERTICAL FORMING SYSTEMS

Productive Roll Back system for mid-rise

and high-rise concrete structures and
shear walls.
Roll Back is an engineered "jump form"
system designed for use on elevated
concrete forming applications. The system
supports any gang form system, including
Steel-Ply, MAX-A-FORM, and Aluminum
Beam Gang.

MEDICAL BUILDING - PORTLAND, OR

The Roll Back system consists of a frame

and carriage assembly suspended
from jump shoes and anchored in the
concrete. The carriage allows the gang
form to be retracted and cleaned without
any crane assistance.

28

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

JOB BUILT
VERTICAL FORMING SYSTEMS

RETAINING WALL - SALEM, OR

Masons offers for rent or purchase a

comprehensive line of on site job assembled
concrete forming systems for construction
of walls - straight, round, curved or
battered and beams and columns. Utilize
" plyform, 2x or 4x studs and wales can
achieve architecturally smooth concrete
surfaces.

TIE SYSTEMS

FOUNDATION - SEATTLE, WA

Masons offers a complete package of thru

wall connecting tie systems; pencil rod and
rod clamps, loop ties and cam locks, taper
ties and wing nuts, or snap ties and Jahn
brackets. Each system has its own unique
features and benefits.

SNAP TIES

For quick turn around time, Masons

manufactures its own snap ties ranging in
wall thickness from 4" to 128". Available
with 1" setback plastic cones for easy
break back and an optional waterseal
neoprene washer. All Masons snap ties are
manufactured to demanding tolerances,
with thorough testing from raw material to
finish product.

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

29

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO

ADJUSTABLE PIPE BRACES

M A SO NS SUPPLY

BRACES
VERTICAL FORMING SYSTEMS

Masons offers a complete line of inserts, lifting

hardware and adjustable pipe braces used in
the tilt-up method of construction.
Telescoping heavy steel braces are available
in several sizes to provide 76" to 320"
adjustment in length. Ductile cast iron brackets
at both ends of the brace are slotted to
receive a 3/4" diameter bolt. A positive stop
at the slotted hole prevents the brace from
moving sideways.

HIGH TECH BUILDING - CAMAS, WA

30

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

TILT UP

TILT UP LIFTING SYSTEM

OFFICE BUILDING - ARLINGTON, WA

Concrete elements are formed on a

building site for their given thickness.
These elements are usually formed on a
slab of concrete that is the building floor
or a temporary concrete casting surface
near the building footprint.
The elements (generally wall panels)
are allowed to cure and then are tilted
from horizontal to vertical with a crane
and braced into position. The Tilt-Up
Lifting System is a quality high strength,
economical method for lifting, handling
and placing tilt-up wall panels.

PUBLIC STORAGE - KENMORE, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

31

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

DECK FAST
DeckFast, formerly Topec Deck System,
is a modular slab formwork system used for
commercial and industrial applications. The
system will support slabs up to 22" and heights
up to 19' above the floor or ground.

HORIZONTAL FORMING
& SHORING SYSTEMS

The basic DeckFast system consists of tubular

post shores that are adjustable to 18', bearing
supports and modular forming panels. The
uniqueness of this system lies with bearing
supports that capture and support corner
clusters of four panels. When the bearing
supports are fastened to flat top post shores,
the panels and post shores can be erected
individually from below, simplifying the
erection process.

COLUMN FILLER DETAIL

RETIREMENT CENTER - VANCOUVER, WA

STUDENT HOUSING - PORTLAND, OR

32

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

HORIZONTAL FORMING
& SHORING SYSTEMS

BREWERY BLOCK 3 - PORTLAND, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

33

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

HV-DECK/PANEL SYSTEM
The HV decking system provides a rapid, versatile
and efficient means of casting on-site concrete
decks in a wide variety of applications.
Lightweight and easy to use, HV comprises of just
four main components and can be erected and
dismantled by a team of two operatives without
the need for special tools, making it one of the least
labor intensive systems on the market.

CONDOMINIUM BUILDING - PORTLAND, OR

HV Components
The HV panel decking system comprises 4 main
components:

HORIZONTAL FORMING
& SHORING SYSTEMS

1. HV Prop
2. Drop Head
3. Primary Beams
4. Secondary Beams

CONDOMINIUM BUILDING W/ HV PANELS

TITAN HV - MAIN BEAM & SECONDARY BEAM

34

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

PANEL HANDLING RACK

PANEL TO PLYWOOD TRANSITIONAL

HORIZONTAL FORMING
& SHORING SYSTEMS

HV MAIN BEAM / SECONDARY BEAM

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

35

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SONS SUP PLY

MEGA SHORE
The MEGA SHORE Support System is designed to
decrease labor costs, improve safety and meet
the demands of structural requirements. The system
has been designed to combine maximum flexibility
in use with a minimum number of components.
Legs, frames, and beams are the only 3 components
used for basic application.

PANELIZED DECK TABLES

HORIZONTAL FORMING
& SHORING SYSTEMS

Mega Shore can support loads up to 22,000 lbs

per leg. Legs are available in three sizes, each with
continuous vertical slots to allow ledger frames to
be fitted at the optimum height. Screw jacks can
be fitted top and bottom for vertical adjustment
up to 8 feet.

POWER PLANT PEDESTAL - CLATSKANIE, OR

36

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MAS O N S SU P P L Y

MULTI-USE BUILDING - PORTLAND, OR

HORIZONTAL FORMING
& SHORING SYSTEMS

MEGA SHORE PERIMETER DECK TABLES.

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

37

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

10K - STEEL SHORE FRAMES

HORIZONTAL FORMING
& SHORING SYSTEMS

SHORING PROJECT - EVERETT, WA

AUTO DEALERSHIP - TACOMA, WA

10K Steel Shore Frames are available in 4',

5' and 6' heights and either 2' or 4' widths.
The wide range of frame sizes together with
the post shore staffs and staff attachments
enable the system to be utilized for a
variety of job-site applications.

OFFICE BUILDING - PORTLAND, OR

POST SHORES
Steel Post Shores are an economic
and popular method of shoring and
re-shoring in the construction market today.
They are ideally suited to all kinds of building
construction and repair.

SHOPPING MALL - SEATTLE, WA

38

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

SOLDIER BEAM
Soldiers are a strong, light weight
construction beam system with unlimited
application possibilities. They are truly the
"next generation" because of their unique
hole patterns, which make them adaptable
to almost any configuration.
Soldiers are compatible with all forming
systems. They can be the waler and
strongback system for Steel-Ply or
Aluminum Beam Gang. They can be the
one-sided bracing or catilever stiffbacks for
MAX-A-FORM; they can be the truss and
shoring for custom applications.

ONE SIDED WALL FORMING

HORIZONTAL FORMING
& SHORING SYSTEMS

Soldiers are double, 9", specially formed

channels of 10 gauge, high strength steel.
The end plates are perpendicular to the
channels. When bolted together endto-end with four " 2" Speed Bolts, the
Soldiers become a straight, continuous
beam which develops its full strength
through the connection.
Soldiers are lightweight and strong. They are
as light as double 5" channels and as strong
as double 8" channels. The engineering
data confirms the impressive strength-toweight ratio of Soldiers.

HOSPITAL - PORTLAND, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

39

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

HOV EXPANSION EVERETT

OVERHANG BRACKETS

HORIZONTAL FORMING
& SHORING SYSTEMS

Overhang Brackets are designed for

maximum adjustment and strength to
meet the rigors of heavy cantilever/
overhang applications.
They can be mounted to steel beams,
precast concrete beams and concrete
box beams with the appropriate hanger
devices. Both of the bracket models can
be easily and quickly preset on the ground
and then set in place as needed.

PULP MILL - LONGVIEW, WA

STADIUM - SEATTLE, WA

40

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

CONDOMINIUM PROJECTS - PORTLAND, OR

SAFETY RAIL BRACKETS

A strong clamp-on post opens wide
and tightens quickly on slabs of
any thickness from 0"-29", allowing
for application to practically any
project. Simple to install with a top
adjusting wing nut, utilizing a hammer
or wrench from a standing position.

HORIZONTAL FORMING
& SHORING SYSTEMS

Galvanized for durability, it is designed

to withstand the toughest handling.
The captive inner member extends to
29", preventing the bottom piece from
falling out.

OFFICE BUILDLING - PORTLAND, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

41

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

STEEL-PLY
Any size column up to 24" wide can be
formed without ties by using standard
Steel-Ply panels or fillers. Columns can be
handset with standard outside corners.
Handsetting forms is productive for projects
with just a few columns or columns with
varying dimensions.

CONDOMINIUM PROJECT - PORTLAND, OR

COLUMN FORMING

Columns can also be gangformed with

a column hinge and a release corner
for greater productivity. Quick column
hardware is used in combination with the
column hinge to provide a quick closure
and release. This method of column
forming with Steel-Ply virtually eliminates
lost hardware and also provides maximum
forming productivity, though you need a
crane to move the equipment.

MIX-USE BUILDING - SEATTLE, WA

42

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

ADJUSTABLE STEEL
Adjustable column form is one of the most
versatile and productive forming systems for
forming square and rectangular columns.
From 9" x 16" up to 48" square, the system
embraces a phenomenal range of civil and
commercial column sizes. This extremely
adaptable system is also highly regarded
for the excellent, consistent concrete finish
produced every pour.
BELLINGHAM, WA

MIXED USE BUILDING - SEATTLE, WA

COLUMN FORMING

STUDENT HOUSING - PORTLAND, OR

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

43

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

MAX-A-FORM
MAX-A-FORM combines the laborsaving benefits of modular forming with
the strength of an all-steel design. The
structurally welded frame and steel
face can support concrete loads over
long spans without the need for shoring.
It is ideal for gang forming walls, large
columns or bridge piers.

FREEWAY - PORTLAND, OR

The MAX-A-FORM concrete forming

system combines a 3/16" steel face
with heavy duty steel crossmembers to
support higher pour rates. Panels up to
8' wide are rated at 1,500 psf, 9' and 10'
wide panels at 1,200 psf. The strength of
this design virtually eliminates the need
for walers and dramatically reduces tie
requirements.

COLUMN FORMING

The MAX-A-FORM system consists of more

than 100 standard panel sizes that can
be engineered for the most demanding
concrete forming conditions. This system
provides exceptional productivity for
large structural applications.

44

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

CIRCULAR STEEL
FREEWAY - MAPLE VALLEY, WA

Heavy duty, all-steel Circular Forms

provide consistently round, smooth
concrete columns for building and bridge
construction.
A 3,000 psf pressure rating allows for
fast pour rates.
Wide variety of standard sizes
available for rental or purchase.
Sizes include:
Diameters: 24", 30", 36", 42", 48",
54", 60", 72", 84" & 96"

HOOD CANAL, WA

Lengths: 1', 2', 4', 8' and 10'

(bolt together for desired height)

COLUMN FORMING

BRIDGE COLUMNS - EVERETT, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

45

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

LOCKFAST COLUMN CLAMP

LockFast Column Clamps have these
advantages; they are job-built and gang
formed. There are no loose pieces and they
have minimum labor costs. They are designed
for rapid locking action and fast placement of
concrete.

COLUMN FORMING

HOTEL - LAS VEGAS, NV

GARAGE - HILLSBORO, OR

46

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

LOK'N SQUARE COLUMN CLAMP

LOK'N Square Column Clamps are job-built and
gang formed. They have the advantage of no
loose pieces, and they have proven to keep labor
costs at a minimum. They are designed for rapid
locking action and fast placement of concrete.

COLUMN FORMING

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

47

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

RIDGEFIELD FORM YARD

CUSTOM MANUFACTURING

Masons' forming & shoring facility

is complete with covered assembly
space and ten plus acres of yard. The
Ridgefield facility will help to supply your
special needs from simple plate washers
to custom forming components.

CUSTOM HIGHWAY BARRIERS

CUSTOM POURED IN PLACE PARAPET AND SLAB

EDGE FORMS

CUSTOM STEEL BRIDGE DECK SOFFIT FORM

UTILIZING STANDARD STEEL SHORING

48

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

PRE-ASSEMBLY

TIE
TIE

PRE-ASSEMBLY

Panel Pre-Assembly includes design and

layout drawings to determine required
panel sizes, attachment of plywood to
rental components, (ie. aluminum joists,
steel walers) pre-drilling of tie holes,
piece marking and loading on trucks.

TIE
TIE

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

49

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
M A SO NS SUPPLY

THE BEST PRODUCTS AVAILABLE

MASONS SUPPLY

Masons has the largest inventory of masonry specialties, concrete forms, and accessories in the
Northwest. With over 90 years of experience, Masons knows what works and offers only the best
products available. We have everything you need to complete your project. Masons comprehensive
inventory includes:
CONCRETE CHEMICALS AND
POWDERS
Concrete Admixtures
Curing and Sealing Compounds
Epoxy Adhesives and Coatings
Grouts and Hardeners
Patching Materials
Sealant and Waterproofing
Surface Retarders
CONCRETE FORMING SYSTEMS
AND ACCESSORIES
Column and Form Treatments
Form Releases
Forming Systems
Tieing and Handset
Slab and Horizontal
Tilt-Up
Inserts
Plastic Accessories

MASONRY SPECIALISTS
Cement and Mortars
Color and Admixtures
Flashing and Waterproofing
Seismic Ties for New and Retrofit
Seismic Anchors - Chemical
and Mechanical
Wall Ties and Reinforcing
SUBGRADE PRODUCTS
Drainage Boards
Geotextile Fabric and Silt Fence
Safety Fence
Sheet Membrane
Vapor Barrier
TOOLS
Concrete Placing and Finishing
Masonry Placing and Finishing
Power Trowels, Screeds, Mixers
and Saws
Safety Supplies

NEW CONSTRUCTION PROJECTS

Masons has the products to meet your concrete and

masonry needs for every stage of your project. Masons
carries a full line of products, such as chemicals, admixtures,
waterproofing and tools.
We offer forming products such as modular wood faced
forming, standard steel forming, aluminum beam gang,
heavy duty forming, bridge deck forming, precast curb and
gutter forms, and architectural form liners. We can supply all
your vertical and horizontal forming needs.

RENOVATION PROJECTS

90 years of experience working with manufacturers and

supplying construction materials has given us the knowledge
to work with architects, engineers and contractors. We can
provide the materials to restore buildings and other structures
to their original appearance and structural integrity.

CALL AND ASK TO GET

ANY OF OUR OTHER CATALOGS:
Concrete Forming and Accessories
Concrete and Masonry Tools for the Trades
Construction Liquid and Powder
ALSO AVAILABLE ON CD & ONLINE

50

RENTAL AND SALES OF:

Adjustable Radius Walers
Aluminum Beams
Column Forms
Crane Set Forms
Euro Clamp Wall Forms
Euro Drop Head Deck Forms
Handset Forms
Overhang Brackets
Safety Rail Post
She Bolts and Taper Ties
Shoring
Soldier Beam
Snap Ties and Accessories
Steel Column Forms
Steel Forms
Steel Ply
Ties
Tilt-Up Braces and Accessories
Walers

INDUSTRIAL PROJECTS

With Masons experience, knowledge and

large inventory of dependable products
and supplies, we can meet your immediate
requirements for emergencies, shut-downs
and additions.
Our expert personnel can work with your
engineering, construction and maintenance
departments and get you into production. Our
specialists are experts in emergency repairs on
floors, walls, ceilings, and machinery bases.

CIVIL PROJECTS

Masons can support you on your road,

bridge, dam, water-treatment, reservoir, and
other concrete structural projects. Whether
new construction or repair, Masons has the
products you need, delivered when you
need them. Our expertise is backed by over
90 years of serving the Northwest.
Whether you are in the planning, building
or construction phase, keep your job on
schedule with innovative ideas and proven
products at competitive prices.

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

MASCO
MASON S S UPPL Y

FORMING FACILITIES

masons RIDGEFIELD FORMING & SHORING FACILITY rIDGEFIELD, WA

masons woodinville FORM YARD WOODINVILLE, WA

MASONS SUPPLY COMPANY

Oregon (800) 537-3407 Washington (800) 537-6216

51

Clackamas | Eugene | West Eugene | Hillsboro | Medford | Portland | Salem | Wilsonville | Port Orchard | Ridgefield | Seattle | Tacoma | Woodinville

LOCATIONS
OREGON
PORTLAND DISTRIBUTION CENTER
2637 SE 12TH AVE
PORTLAND, OR 97202
TEL (503) 234-4321
WATTS (800) 537-3407
FAX (503) 234-5606

HILLSBORO BRANCH
21535 NW CHERRY LANE
HILLSBORO, OR 97124
TEL (503) 533-0107
FAX (503) 533-0407
MEDFORD BRANCH
2036 LARS WAY
MEDFORD, OR 97501
TEL (541) 772-6161
FAX (541) 772-4752

CLACKAMAS BRANCH
14670 SE 82ND DR
CLACKAMAS, OR 97015
TEL (503) 722-1528
FAX (503) 722-1569

SALEM BRANCH
2430 MCGILCHRIST ST SE
SALEM, OR 97302
TEL (503) 585-5504
WATTS (800) 655-0773
FAX (503) 585-6732

EUGENE BRANCH
1485 GLENWOOD BLVD
EUGENE, OR 97403
TEL (541) 744-6696
WATTS (888) 537-1227
FAX (541) 744-2302

WILSONVILLE BRANCH
10955 SW COMMERCE CIRCLE, Ste E
WILSONVILLE, OR 97070
TEL (503) 582-9320
FAX (503) 582-8324

WEST EUGENE BRANCH

555 COMMERCIAL ST, Ste A
EUGENE, OR 97402
TEL (541) 683-1408
FAX (541) 683-1956

WASHINGTON
WOODINVILLE DISTRIBUTION CENTER
6018-234TH ST SE, Ste A
WOODINVILLE, WA 98072
TEL (425) 487-6161
WATTS (800) 537-6216
FAX (425) 402-3676
PORT ORCHARD
1525 VIVIAN COURT, Ste 150
PORT ORCHARD, WA 98367
TEL (360) 876-6372
FAX (360) 876-6373

SEATTLE BRANCH
115 S. DAWSON ST.
SEATTLE, WA 98108
TEL (206) 767-4645
FAX (206) 767-4696
TACOMA BRANCH
2506-104TH ST CT S, STE H
LAKEWOOD, WA 98499
TEL (253) 581-6161
FAX (253) 588-4272

RIDGEFIELD FORM/SHORE/CUSTOM FAB

7707 S. UNION RIDGE PKWY
RIDGEFIELD, WA 98642
TEL (360) 887-4777
FAX (360) 887-3048

LOCALLY OWNED FOR OVER 90 YEARS

MASCO
MA SON S SU PPL Y

COPYRIGHT MASONS SUPPLY COMPANY 2012