Scribd
Upload
54 views3 pages

DM7486 Quad 2-Input Exclusive-OR Gate: General Description

datasheet of ic

Uploaded by

sal1980
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
54 views3 pages

DM7486 Quad 2-Input Exclusive-OR Gate: General Description

datasheet of ic

Uploaded by

sal1980
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

Revised July 2001

DM7486
Quad 2-Input Exclusive-OR Gate
General Description
This device contains four independent gates each of which
performs the logic exclusive-OR function.

Ordering Code:
Order Number
DM7486N

Package Number
N14A

Package Description
14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide

Connection Diagram

Function Table
Y=AB
Inputs

Output

Y
L

H = HIGH Logic Level


L = LOW Logic Level

2001 Fairchild Semiconductor Corporation

DS006531

www.fairchildsemi.com

DM7486 Quad 2-Input Exclusive-OR Gate

September 1986

DM7486

Absolute Maximum Ratings(Note 1)


Supply Voltage

Note 1: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum ratings.
The Recommended Operating Conditions table will define the conditions
for actual device operation.

7V

Input Voltage

5.5V
0C to +70C

Operating Free Air Temperature Range


Storage Temperature Range

65C to +150C

Recommended Operating Conditions


Symbol

Parameter

Min

Nom

Max

4.75

5.25

Units

VCC

Supply Voltage

VIH

HIGH Level Input Voltage

VIL

LOW Level Input Voltage

0.8

IOH

HIGH Level Output Current

0.8

mA

IOL

LOW Level Output Current

16

mA

TA

Free Air Operating Temperature

70

Electrical Characteristics
over recommended operating free air temperature range (unless otherwise noted)
Symbol

Parameter

Conditions

VI

Input Clamp Voltage

VCC = Min, II = 12 mA

VOH

HIGH Level

VCC = Min, IOH = Max

Output Voltage

VIL = Max, VIH = Min

LOW Level

VCC = Min, IOL = Max

Output Voltage

VIH = Min, VIL = Max

VOL

Min

2.4

Typ
(Note 2)

Max

Units

1.5

3.4

0.2

0.4

V
mA

II

Input Current @ Max Input Voltage

VCC = Max, VI = 5.5V

IIH

HIGH Level Input Current

VCC = Max, VI = 2.4V

40

IIL

LOW Level Input Current

VCC = Max, VI = 0.4V

1.6

mA

IOS

Short Circuit Output Current

VCC = Max (Note 3)

55

mA

ICCH

Supply Current with Outputs HIGH

VCC = Max (Note 4)

30

50

mA

ICCL

Supply Current with Outputs LOW

VCC = Max (Note 3)(Note 5)

36

57

mA

18

Note 2: All typicals are at VCC = 5V, TA = 25C.


Note 3: Not more than one output should be shorted at a time.
Note 4: ICCH is measured with all outputs open, one input of each gate at 4.5V, and the other inputs grounded.
Note 5: ICCL is measured with all outputs open, and all inputs at ground.

Switching Characteristics
at VCC = 5V and TA = 25C
Symbol

Parameter

Conditions

CL = 15 pF, RL = 400
Min

tPLH

Propagation Delay Time


LOW-to-HIGH Level Output

tPHL

Propagation Delay Time


Propagation Delay Time
LOW-to-HIGH Level Output

tPHL

Propagation Delay Time

ns

17

ns

30

ns

22

ns

Other Input HIGH

HIGH-to-LOW Level Output

www.fairchildsemi.com

23
Other Input LOW

HIGH-to-LOW Level Output


tPLH

Units

Max

DM7486 Quad 2-Input Exclusive-OR Gate

Physical Dimensions inches (millimeters) unless otherwise noted

14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide


Package Number N14A

Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILDS PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.

1. Life support devices or systems are devices or systems


which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.

www.fairchildsemi.com

www.fairchildsemi.com

You might also like