Scribd
Upload
1K views2 pages

BIFPCL Question (Assistant Engineer) 22.05.15

The document contains 14 questions related to electrical engineering topics like circuit analysis, power systems, electrical machines, and instrumentation. The questions cover concepts such as loop analysis, maximum power transfer, loss of excitation protection, types of coal and factors that determine fuel quality, amplifier specifications, superposition theorem, definitions of mechanical and thermal efficiencies, power factor correction, induction motor efficiency, generator and motor operation of DC machines, differences between feedwater and cooling water in steam turbines, transfer functions, and time of operation for an overcurrent relay.

Uploaded by

Mohammad Tousif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
1K views2 pages

BIFPCL Question (Assistant Engineer) 22.05.15

The document contains 14 questions related to electrical engineering topics like circuit analysis, power systems, electrical machines, and instrumentation. The questions cover concepts such as loop analysis, maximum power transfer, loss of excitation protection, types of coal and factors that determine fuel quality, amplifier specifications, superposition theorem, definitions of mechanical and thermal efficiencies, power factor correction, induction motor efficiency, generator and motor operation of DC machines, differences between feedwater and cooling water in steam turbines, transfer functions, and time of operation for an overcurrent relay.

Uploaded by

Mohammad Tousif
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

02.

Using Mesh analysis, Find out the


Loop current. Where R=10

03. Find the load RL for maximum power transfer and the maximum power
adsorbed by the load.

04. How loss of excitation protection of synchronous motor provided?

05. what are the main components of coal? name some types of coal? how
fuel quality can be recognized?

06. Find the proper current, voltage & power rating of the amplifier shown
in figure.

07. Using superposition theorem, Determine the V0 of an Op-Amp.

08. Define mechanical efficiency, heat efficiency & plant efficiency.

09. A voltmeter reading 240 volts, ammeter reading 10A, wattmeter reading
1200w, a) find power factor, b) comment on the type of load, c) what is the
reactive power that should be compensated if the pf is unity, d) what will be
the size of capacitor to achieve the target.

10. The rotor cu-loss of a 3- induction motor is 300w. For a slip of 4.5%
Calculate the electrical power converted to mechanical power.
11. A dc machine has terminal voltage of 220 volts, line current 20A,
armature resistance 0.5 , field resistance 110 , find the induced e.m.f if
the machine is working as generator and motor.
12. What is the difference between feed water and cooling water of a steam
turbine plant?

13. Determine the equivalent transfer function

of the system.

14. Determine the time of operation of a 5 amp, 3 sec overcurrent relay


having a current setting of 125% and a time setting multiplier of 0.6
connected to supply circuit through a 400/5 current transformer when the
circuit carries a fault current of 4000 A. Use the curve shown in the figure.

You might also like