Scribd
Upload
389 views8 pages

La3600 PDF

The LA3600 is a 5-band graphic equalizer integrated circuit that can be used in portable audio equipment like stereos and car audio systems. It contains one operational amplifier and allows a 5-band graphic equalizer to be created easily using external capacitors and variable resistors to set the resonance frequency for each band. Connecting two LA3600 chips can create a multi-band equalizer with 6 to 10 bands. It is stable with capacitive loads and has low power consumption.

Uploaded by

oink
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
389 views8 pages

La3600 PDF

The LA3600 is a 5-band graphic equalizer integrated circuit that can be used in portable audio equipment like stereos and car audio systems. It contains one operational amplifier and allows a 5-band graphic equalizer to be created easily using external capacitors and variable resistors to set the resonance frequency for each band. Connecting two LA3600 chips can create a multi-band equalizer with 6 to 10 bands. It is stable with capacitive loads and has low power consumption.

Uploaded by

oink
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Ordering number:ENN1513D

Monolithic Linear IC

LA3600
5-Band Graphic Equalizer
Applications

Package Dimensions

Portable component stereos, tape-recorders, radio-cassette


recorders, car stereos.

unit:mm
3006B-DIP16
16

0.25

7.62

On-chip one operational amplifier.


5-band graphic equalizer for one channel can be formed
easily by externally connecting capacitors and variable
resistors which fix fo (resonance frequency).
Series connection of two LA3600s makes multiband (6
to 10 bands) available.
Highly stable to capacitive load.

6.4

[LA3600]

Features

3.4

3.0
3.65max

19.2

0.71

2.54

0.48

1.2

SANYO : DIP16

Specifications
Absolute Maximum Ratings at Ta = 25C
Parameter

Symbol

Maximum Supply Voltage


Allowable Power Dissipation

Conditions

Ratings

Unit

VCC max

20

Pd max

300

mW

Operating Temperature

Topr

20 to +75

Storage Temperature

Tstg

40 to +125

Operating Conditions at Ta = 25C


Parameter
Recommended Supply Voltage
Operating Voltage Range

Symbol

Conditions

Ratings

VCC
VCC op

Unit
8

5 to 15

Any and all SANYO products described or contained herein do not have specifications that can handle
applications that require extremely high levels of reliability, such as life-support systems, aircrafts
control systems, or other applications whose failure can be reasonably expected to result in serious
physical and/or material damage. Consult with your SANYO representative nearest you before using
any SANYO products described or contained herein in such applications.
SANYO assumes no responsibility for equipment failures that result from using products at values that
exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other
parameters) listed in products specifications of any and all SANYO products described or contained
herein.

SANYO Electric Co.,Ltd. Semiconductor Company


TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
21000TH (KT)/33194HO/7297AT/8225MW/7274KI, TS No.15131/7

LA3600
Operating Characteristics at Ta = 25C, VCC=8V, RL=10k, Rg=600, See specified Test Circuit.
Parameter

Symbol

Quiescent Current

Icco

Voltage Gain

VG

Boost Amount

Conditions

5.0

8.0

mA

+2.2

dB

f=100Hz

10

12

dB

f=340Hz

10

12

dB

f=1kHz

10

12

dB

f=3.4kHz

10

12

dB

10

12

dB

12

10

dB

12

10

dB

Vo=10dB is taken as
0dB at all flat mode at
f=1kHz.

f=340Hz

Total Harmonic Distortion

THD

Output Noise Voltage

VNO

Unit

+0.8

f=100Hz
CUT

max

3.0

f=10kHz

Cut Amount

typ

3.8

f=1kHz, Vin=10dB at all flat mode

BOOST

Ratings
min

f=1kHz

12

10

dB

f=3.4kHz

12

10

dB

f=10kHz

12

dB

f=1kHz, Vo=1.0V
Rg=0, All flat B.P.F. 10Hz to 30kHz

10

0.03

0.1

2.0

20

Test Method : VCC=8V, RL=10k, Rg=600


Item

SW1

SW2

SW3

SW4

SW5

SW6

SW7

SW8

Icco

Conditions

VG

f=1kHz, Vin=10dB

BOOST

f=100Hz

BOOST

f=340Hz

BOOST

f=1kHz

BOOST

f=3.4kHz

BOOST

f=10kHz

CUT

f=100Hz

CUT

f=340Hz

CUT

f=1kHz

CUT

f=3.4kHz

CUT

f=10kHz

THD

f=1kHz, Vo=1.0V

VNO

No.15132/7

LA3600
Test Circuit

Equivalent Circuit Block Diagram

No.15133/7

LA3600
Sample Application Circuit

fo (resonance frequency)
In the sample application circuit, fo for each of 5 bands is set as follows :
fo=108Hz, 343kHz, 1.08kHz, 3.43kHz, 10.8kHz
fo=

1
2 C1, C2, R1, R2

(R1=1.2k, R2=68k on-chip resistor)

Description of external parts


C1, C2 : Capacitors used to fix fo (resonance frequency)
C2
: Input capacitor. Decreasing the capacitor value lowers the frequency response at low frequencies.
C3
: Input capacitor. Decreasing the capacitor value lowers the frequency response at low frequencies.
C4
: Decoupling capacitor. Decreasing the capacitor value makes the effect of power supply stronger, whereby
ripple is liable to occur.
C5
: Power capacitor.
C6
: Output capacitor. Decreasing the capacitor value lowers the frequency response at low frequencies.

No.15134/7

LA3600
Sample Printed Circuit Pattern

Proper cares in using IC


Maximum supply voltage VCC max 20V must not be exceeded. The operating voltage is in the range of 5 to 15V.
Application of power with the pin-to-pin spaces shorted causes breakdown or deterioration of the IC to occur.
When mounting the IC on the board or applying power, make sure that the pin-to-pin spaces are not shorted with
solder, etc.

No.15135/7

LA3600

No.15136/7

LA3600

Specifications of any and all SANYO products described or contained herein stipulate the performance,
characteristics, and functions of the described products in the independent state, and are not guarantees
of the performance, characteristics, and functions of the described products as mounted in the customer's
products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,
the customer should always evaluate and test devices mounted in the customer's products or equipment.
SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all
semiconductor products fail with some probability. It is possible that these probabilistic failures could
give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,
or that could cause damage to other property. When designing equipment, adopt safety measures so
that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective
circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO products(including technical data,services) described or
contained herein are controlled under any of applicable local export control laws and regulations,
such products must not be expor ted without obtaining the expor t license from the authorities
concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Electric Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not
guaranteed for volume production. SANYO believes information herein is accurate and reliable, but
no guarantees are made or implied regarding its use or any infringements of intellectual property rights
or other rights of third parties.
This catalog provides information as of February, 2000. Specifications and information herein are subject
to change without notice.
PS No.15137/7

This datasheet has been download from:


www.datasheetcatalog.com
Datasheets for electronics components.

You might also like