Scribd
Upload
350 views3 pages

Hib Bler Arches Examples

The document discusses solving for forces in a three-hinged tied arch subjected to various loads. It provides an example problem where the forces in members CH and CB of the arch are calculated. Equations of equilibrium and the method of joints are used. A second example problem calculates the required height h1 of joints B and D in a three-hinged trussed arch to achieve a funicular shape under symmetric loading.

Uploaded by

Kellesia Williams
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
350 views3 pages

Hib Bler Arches Examples

The document discusses solving for forces in a three-hinged tied arch subjected to various loads. It provides an example problem where the forces in members CH and CB of the arch are calculated. Equations of equilibrium and the method of joints are used. A second example problem calculates the required height h1 of joints B and D in a three-hinged trussed arch to achieve a funicular shape under symmetric loading.

Uploaded by

Kellesia Williams
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

198

CHAPTER 5

CABLES

AND

ARCHES

EXAMPLE 5.5
The three-hinged tied arch is subjected to the loading shown in
Fig. 511a. Determine the force in members CH and CB. The dashed
member GF of the truss is intended to carry no force.

20 kN

15 kN
H

1m

1m

20 kN

15 kN

15 kN

15 kN

C
B

4m
A

E
3m

3m

3m

Ax

A
3m

3m

3m

3m

3m

Ay

Ey
(b)

(a)

Fig. 511

SOLUTION
The support reactions can be obtained from a free-body diagram of
the entire arch, Fig. 511b:
20 kN

15 kN

d+ MA = 0;
0

C
Cy

5m

FAE
3m

3m

Cx

Ey112 m2 - 15 kN13 m2 - 20 kN16 m2 - 15 kN19 m2 = 0

+ F = 0;
:
x
+ c Fy = 0;

Ey = 25 kN
Ax = 0
Ay - 15 kN - 20 kN - 15 kN + 25 kN = 0
Ay = 25 kN

The force components acting at joint C can be determined by considering the free-body diagram of the left part of the arch, Fig. 511c.
First, we determine the force:

25 kN

d + MC = 0;
(c)

FAE15 m2 - 25 kN16 m2 + 15 kN13 m2 = 0


FAE = 21.0 kN

5.5

THREE-HINGED ARCH

199

Then,
+ F = 0;
:
x

- Cx + 21.0 kN = 0, Cx = 21.0 kN

+ c Fy = 0;

25 kN - 15 kN - 20 kN + Cy = 0, Cy = 10 kN

To obtain the forces in CH and CB, we can use the method of joints
as follows:

20 kN
FHG

FGC

Joint G; Fig. 511d,

(d)

+ c Fy = 0;

FGC - 20 kN = 0
20 kN

FGC = 20 kN 1C2

FCH
1

Joint C; Fig. 511e,


+ F = 0;
:
x
+ c Fy = 0;
Thus,

FCB

3
3

21.0 kN

10 kN

FCB A 1310 B - 21.0 kN - FCH A 1310 B = 0

(e)

FCB A 1110 B + FCH A 1110 B - 20 kN + 10 kN = 0

FCB = 26.9 kN 1C2

FCH = 4.74 kN 1T2

Ans.
Ans.

Note: Tied arches are sometimes used for


bridges. Here the deck is supported by
suspender bars that transmit their load to
the arch. The deck is in tension so that it
supports the actual thrust or horizontal
force at the ends of the arch.

200

CHAPTER 5

CABLES

AND

ARCHES

EXAMPLE 5.6
The three-hinged trussed arch shown in Fig. 512a supports the
symmetric loading. Determine the required height h1 of the joints B
and D, so that the arch takes a funicular shape. Member HG is
intended to carry no force.

5k

5k

5k

5k

5k

h1

15 ft

h1

E
10 ft

10 ft

10 ft

10 ft

(a)

y
10 ft

10 ft
x

SOLUTION
For a symmetric loading, the funicular shape for the arch must be
parabolic as indicated by the dashed line (Fig. 512b). Here we must
find the equation which fits this shape. With the x, y axes having an
origin at C, the equation is of the form y = - cx2. To obtain the
constant c, we require

yD
D

-115 ft2 = - c120 ft22


c = 0.0375>ft

15 ft

Therefore,
E

(b)

Fig. 512

y ! "cx2

yD = - 10.0375>ft2110 ft22 = - 3.75 ft

So that from Fig. 512a,

h1 = 15 ft - 3.75 ft = 11.25 ft

Ans.

Using this value, if the method of joints is now applied to the truss, the
results will show that the top cord and diagonal members will all be
zero-force members, and the symmetric loading will be supported
only by the bottom cord members AB, BC, CD, and DE of the truss.

You might also like