Automotive Equipment

Training Programme 2013

Communication
Infrastructure
Transport
Technology
Training
Bosch has always been in step with technology. Which is why our
training methods have undergone constant reformation. And just as
technology grows, our training too becomes more comprehensive and
reaches a larger audience.

We are all living in a time of rapid change. Change is all around us. Our country has changed, so has
our society, technology has transformed our lives and with that our thinking too.
It is imperative then that an organisation embraces change as well in its processes, its systems,
in ways of doing business.

Dear Business Partner,

The world we grew up in is changing by the day, and we are feeling this change in every sphere
of our lives. Smart phones and e-mails have replaced trunk calls and inland letters. A few hours
of television everyday on a single national channel has changed to hundreds of 24-hour cable
channels. DVDs very recently thought as a breakthrough and over improvement of video cassettes
and VCDs are already being replaced by Blu-ray discs. So too has automotive technology evolved,
and to keep pace with this change, our training systems, methodologies and course content have
all evolved.
From a few training centres, the Bosch Training network now spans the country. Online training is
complementing classroom training, and making it accessible to people everywhere. Mobile Training
Centres from Bosch are taking automotive training to places and to people who would otherwise
find it difficult to learn. A greater focus on diesel technologies, notably CRDi, and cutting-edge
diagnostic equipment is helping us keep abreast of constantly-evolving automotive technology
and meet increasingly demanding customer needs, with cost-effective training solutions even in a
difficult economic scenario.
It is the simple philosophy of helping our partners stay ahead of the curve that is driving these
new training initiatives at Bosch, built on the belief that Knowledge is power. By arming ourselves
with the right knowledge, the right training and raising the level of automotive intelligence, we can
together deliver better service, which in turn will lead to more satisfied customers and ultimately
to increased business and growth.
So as we begin a new year, let us do so with a sense of increased optimism and a can do spirit
that will ensure that we have the edge in this competitive sector of the automotive industry.
Let the Bosch Training Programme 2013 help deliver nothing but the very best in service to our
customers and take our success to the next level.
Wishing you a very prosperous and profitable 2013,
Yours sincerely,

S. Muralidharan
Regional President
Automotive Aftermarket

03

T.S. Ananda Kumar

Sr. General Manager
Technical Service & Support
Automotive Aftermarket

04

Contents
Courses Bosch Training Centre

07

Courses on Diesel Fuel Injection Equipment

07

Course on Auto Electrical

09

Seminar for OE Customers

09

Courses for Institutional Customers

09

Courses on Workshop & Test Equipment

10

Course on Bosch Wheel Aligner

10

Course on Bosch Wheel Balancer, Tyre Changer and Nitrogen Tyre Inflator

12

Course on Bosch Air Conditioning Machine

12

Course on Vehicle Maintenance & Systems

12

Specialised Courses on Systems

13

Course for Bosch System Technicians

13

Courses for Sales/ Service Personnel

13

Courses for Educational Institutes

14

Course for Trainers

14

Course for Students

14

Course for New Entrants (AA)

14

Course for Employees from Bosch Group (India)

14

Courses Regional/ Local Training Centres (RTC/ LTC)

15

Courses on Diesel Fuel Injection

15

Course on Gasoline Fuel Injection

16

Course on Auto Electrical

16

Courses on Bosch Battery

16

Seminars Techno-commercial

17

Courses for State Transport Undertakings

19

Courses for Sales Personnel

20

Course on 2-Wheeler Products

20

Courses on Workshop & Test Equipment

21

Course for Defence Personnel

21

Course for OE Customers

21

Courses for Students and Lecturers

22

Courses for Bosch Car Service (BCS)

24

Courses for Bosch Express Bike Service (EBS)

30

Training Centres

31

Accommodation and Transport Details

32

Bengaluru

32

North Region

33

South Region

37

East Region

41

West Region

44

Eligibility and Enrolment Procedure

05

48

06

Courses Bosch Training Centre

Courses on Diesel Fuel Injection Equipment

07

Course Code:

EP - X

Duration:

Ten days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment with more hands-on training.

Participants:

Fuel Injection Equipment Service Personnel, preferably Bosch Authorised

Representatives.

Course Content:

Working Principle, Repair and Testing of PE...A-type Multi-cylinder Fuel Injection

Pump with RSV and RQV Governors, VE Distributor-type Fuel Injection Pump, Add-on
Modules fitted on PE and VE Pumps, Injector, Injection Timer, Feed Pump and Filters,
Injection Timing Setting on Diesel Engine, Safety and Housekeeping, Maintenance
and Upkeep of Service Literature.

Place:

BTC (Naganathapura, Bengaluru) (On request).

Course Code:

EP - 4

Duration:

Three days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment.

Participants:

Fuel Injection Equipment Service Personnel, preferably Bosch Authorised

Representatives, Engineers/ Technicians from OEMs.

Course Content:

Working Principle, Repair and Testing of VE Distributor-type Fuel Injection Pump

with and without Manifold Pressure Compensator (LDA), Add-on Modules, Injectors,
Filter and Injection Timing Setting on Diesel Engine fitted with VE Pump, Safety and
Housekeeping, Maintenance and Upkeep of Service Literature.

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

EP - P

Duration:

Three days.

Objective:

To make participants competent with Heavy-duty Test Bench to carry out quality
service on Diesel Fuel Injection Equipment.

Participants:

Fuel Injection Equipment Service Personnel of Bosch Authorised Representatives

equipped with Heavy-duty Test Bench.

Course Content:

Working Principle, Repair and Testing of Bosch PE...P Fuel Injection Pump and RQV-K
Governor, Bosch EDC Governor fitted on PE...P Fuel Injection Pumps, Safety and
Housekeeping, Maintenance and Upkeep of Service Literature.

Place:

BTC (Naganathapura, Bengaluru).

08

Course Code:

EDC - 1

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Bosch VE Fuel

Injection Pumps with Electronic Diesel control (VP-37).

Participants:

Personnel servicing Fuel Injection Equipment.

Course Content:

Working Principle, Repair, Testing and Adjustment of Bosch VE Fuel Injection

Pumps (VP 37), Safety and Housekeeping, Maintenance and Upkeep
of Service Literature.

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

EDC - 2

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Bosch

VP-44 Fuel Injection Pumps.

Participants:

Personnel servicing Fuel Injection Equipment, preferably from Bosch Authorised

Representatives.

Course Content:

Working Principle, Repair, Testing and Adjustment of Bosch VP-44 Fuel Injection
Pumps on EPS 815 Test Bench, Safety and Housekeeping, Maintenance and Upkeep
of Service Literature.

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

CR - 1

Duration:

Three days.

Objective:

To make participants competent in carrying out quality service on Common Rail

High-pressure Pumps and Injectors.

Participants:

Technicians from BDS and OEMs equipped with EPS 815 and having experience
in handling all types of existing fuel injection systems.

Course Content:

Structure, Function of Common Rail High-pressure Pumps and Injectors (CP1K, CP1H
& CRI), Characteristics, Testing on the Pump Test Bench EPS 815 with KMA
Measuring technique and Testing of Common Rail Injectors.

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

CR - 2

Duration:

Three days.

Objective:

To make participants competent in carrying out quality service on Common Rail

High-pressure Pumps and Injectors.

Participants:

Technicians from BDS and OEMs equipped with EPS 815 and having experience
in handling all types of existing fuel injection systems.

Course Content:

Structure, Function of Common Rail High-pressure Pumps and Injectors (CP3,

CPN2.2, CB18 & CRIN), Characteristics, Testing on the Pump Test Bench EPS 815
with KMA Measuring technique and Testing of Common Rail Injectors.

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

EPS

Duration:

Two days.

Objective:

The participants will be able to operate the EPS 815 Test Bench using the
Software EPS 945/ 944.

Participants:

New staff, existing and potential EPS 815 users. Personnel who have good experience
in handling all types of fuel injection pumps and governors.

08

Course Content:

Operation of Test Bench EPS 815 with KMA measuring technique.

ff Programming of test protocol adjustment steps.
ff Importing/ exporting data.
ff In-line and Distributor Pump test equipment fitment.
ff Basic pump adjustment.
ff Vehicle Diagnosis (Diesel vehicle)

Place:

BTC (Naganathapura, Bengaluru).

Course on Auto Electrical

Course Code:

AEL - 2

Duration:

Three days.

Objective:

To make participants competent in carrying out quality service on Bosch Auto

Electrical Products and Test Equipment.

Participants:

Personnel handling Auto Electrical Equipment at Bosch Authorised Stockists

/ Distributors/ Workshops.

Course Content:

Working Principle, Repair and Testing of Bosch Auto Electrical Products and
Respective Test Equipment.

Place:

BTC (Naganathapura, Bengaluru) (On request).

Seminar for OE Customers

Course Code:

OES

Duration:

Three days.

Objective:

To provide knowledge on Bosch Products and to inform participants about the latest
developments in Bosch Products.

Participants:

Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content:

Design, Working Principle, Test Procedures of Bosch Fuel Injection and Auto
Electrical Equipment, Interaction with Bosch R&D, Quality and Service Departments.

Place:

BTC (Naganathapura, Bengaluru).

Courses for Institutional Customers

09

Course Code:

RLY

Duration:

Two days.

Objective:

To make participants competent in carrying out

quality service on Fuel Injection Equipment.

Participants:

Fuel Injection Equipment Service Personnel of

Railways.

Course Content:

Working Principle, Repair and Testing of

PF-type Fuel Injection Pumps and Injectors used
by Indian Railways, Safety and Housekeeping,
Maintenance and Upkeep of Service Literature.

Place:

BTC (Naganathapura, Bengaluru).

10

Course Code:

DEF - 2

Duration:

Three days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment.

Participants:

Fuel Injection Equipment Service Personnel from Defence having minimum two years
of on-the-job experience.

Course Content:

Working Principle, Repair and Testing of PE...A Multi-cylinder Fuel Injection Pump
with RSV and RQV Governors, Manifold Pressure Compensator fitted on PE Pumps,
Injection Timing Lock on PE Pumps, Injectors, Injection Timers, Filters and Feed
Pump, Injection Timing Setting on Diesel Engine, Working Principle, Repair and
Testing of Distributor Type, Fuel Injection Pump Type VE with and without Manifold
Pressure Compensator (LDA), Add-on Modules, Injection Timing Setting on Diesel
Engine fitted with VE Pump, Safety and Housekeeping, Maintenance and Upkeep of
Service Literature.

Place:

BTC (Naganathapura, Bengaluru).

10

Courses on Workshop & Test Equipment

Course Code:

WTE - 2

Duration:

Three days.

Objective:

To help participants in carrying out Maintenance, Troubleshooting and Minor Repairs

of Bosch Authorised Workshop and Test Equipment.

Participants:

Personnel looking after the maintenance of Bosch Authorised Workshop and Test
Equipment, TMSS.

Course Content:

Operating Instructions, Maintenance, Troubleshooting Guidelines, Service and Minor

Repairs of Auto Electrical and FIE Test Benches, BAT 121, Battery Load Testers,
Battery Chargers, Tyre Changers, Wheel Balancers, ACS and all other diagnostic
products of Bosch.

Place:

BTC (Naganathapura, Bengaluru) (On request).

Course Code:

MRS

Duration:

Four days.

Objective:

To help participants in carrying out AMC Activities, Troubleshooting and Minor

Repairs of Bosch Authorised Workshop and Test Equipment.

Participants:

Missionary Representatives looking after maintenance of Bosch Authorised Workshop

and Test Equipment.

Course Content:

AMC Activity, Operating Instructions, Maintenance, Troubleshooting Guidelines,

Service and Minor Repairs of Auto Electrical and FIE Test Benches, ASC Equipment,
BAT 121, Battery Chargers, Battery Load Testers, Tyre Changers, Wheel Aligners and
other workshop equipment.

Place:

BTC (Naganathapura, Bengaluru).

Course on Bosch Wheel Aligner

Course Code:

WA

Duration:

One day.

Objective:

To make participants competent enough in carrying out

quality service using Bosch Wheel Aligner.

Participants:

PSDG, BTS, Wheel Aligner end customer

Course Content:

11

1. Fundamentals of Steering Geometry

2. Five basic alignment angles

3. Wheel alignment specifications. Steering axis inclination

4. Maintenance tips: Steering system, suspension, etc.

5. Product feature & operating principle of Bosch Wheel Aligner

6. Training on wheel alignment software

7. Practical on Wheel Alignment using Bosch Wheel Aligner

8. Wheel Aligner Maintenance tips, Dos & Donts

Place:

BTC (Naganathapura, Bengaluru) and RTCs (On request).

Course on Bosch Wheel Balancer, Tyre Changer and

Nitrogen Tyre Inflator
Course Code:

WB, TC, NTI

Duration:

One day.

Objective:

To make participants competent enough in carrying out quality service using Bosch
Wheel Balancer, Tyre Changer & Nitrogen Tyre Inflator.

Particpants:

PSDG, BTS, End customer

Course Content:

1. Basics of tyre (Construction, terminology)

2. Different types of tyres

3. Operating principle of Wheel Balancer, Tyre Changer,

NTI & Knowledge on nitrogen

4. Effects of unbalanced wheel on steering system

5. User training on balancing the different types of wheels

6. User training on Tyre Changer, precautions to be followed

while changing the tyres

7. User training on NTI 100

8. Maintenance tips, Dos & Donts: Wheel Balancer, Tyre Changer & NTI 100

Place:

BTC (Naganathapura, Bengaluru) and RTCs (On request).

Course on Bosch Air Conditioning Machine

Course Code:

ACS

Duration:

One day.

Objective:

To make participants competent enough in carrying out quality service using Bosch
ACS 600, ACS 650 machine.

Particpants:

PSDG, BTS, End customer.

Course Content:

1. Basic working principle of car A/C system

2. Different A/C gases and its features

2. Knowledge on car A/C components system

3. Operating principle of Bosch ACS 6xx

4. User training on ACS 6xx

5. Maintenance tips, Dos & Donts: ACS 6xx

6. Maintenance tips on vehicle A/C system.

Place:

BTC (Naganathapura, Bengaluru) and RTCs (On request).

Course on Vehicle Maintenance & Systems

12

Course Code:

VMS

Duration:

Five days.

Objective:

To make the participants competent in carrying out quality service on Bosch Products
fitted in vehicles.

Participants:

Personnel at BCS Bosch Authorised Stockists/ Distributors/ Workshops offering

Vehicle Service.

12

Course Content:

Practicals on Removal and Fitment of Bosch Products on the Vehicles, using Test
Equipment for Diagnosis and General Service and Maintenance Aspects.

Place:

BTC (Naganathapura, Bengaluru) (On request).

Specialised Courses on Systems

Course Code:

GFI - 2

Duration:

Two days.

Objective:

To educate participants about newer technologies and products in Petrol Injection.

Participants:

Bosch Territory Managers Sales and Service, Bosch Authorised Distributors Field
Representatives, Bosch Authorised Product Stockists and BCS (by invitation).

Course Content:

Technology and Product Knowledge on Petrol Injection. Working of Petrol Engine,

Carburetion Process, Single Point Fuel Injection, Multi-point Fuel Injection and
Vehicle Diagnosis Hardware and Software.

Place:

BTC (Naganathapura, Bengaluru) (On request).

Course for Bosch System Technicians

Course Code:

BST

Duration:

Two to five days (depending on the module).

Objective:

To make the participants knowledgeable about Bosch Products, Equipment

and Vehicle Systems as per the detailed course plan for System Technicians.

Participants:

System Technician Trainees working with Bosch Authorised Workshops

(by invitation).

Course Content:

Working Principle, Repair and Testing of Bosch Products and Respective Test
Equipment, Knowledge on Vehicles, New Technologies and Diagnostic Tools
/Equipment.

Place:

BTC (Naganathapura, Bengaluru), RTCs and LTCs.

Courses for Sales/ Service Personnel

13

Course Code:

TMSS

Duration:

Five days.

Objective:

To make participants competent in handling sales and service activities pertaining to

Bosch Products.

Participants:

Bosch Territory Managers Sales and Service (by invitation).

Course Content:

Product-specific contents (will be mentioned in the invitation).

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

TMSE

Duration:

Five days.

Objective:

To make participants competent in handling service activities pertaining to new

Bosch Products and Equipment.

Participants:

Bosch Territory Managers Service (by invitation).

Course Content:

Product-specific contents (will be mentioned in the invitation).

Place:

BTC (Naganathapura, Bengaluru) (on request, basic courses of two/ three days
duration will be conducted for TMSS/ TMSE at RTCs on mutually agreeable dates).

Courses for Educational Institutes

Course for Trainers
Course Code:

TTT

Duration:

Five days.

Objective:

The Train the Trainer programme enables participants to stay abreast with the latest
technologies.

Participants:

Trainers at educational institutes, OE customers and other institutional customers,

Regional/ Local Trainers (by special invitation).

Course Content:

New technologies in Diesel, Gasoline, Vehicle Diagnosis Hardware and Software,

Latest Product Launch, and Service and Training Concepts.

Place:

BTC (Naganathapura, Bengaluru).

Course for Students

Course Code:

NEI - 2

Duration:

Three days.

Objective:

To educate participants about newer automotive technologies.

Participants:

Final year students from technical educational institutes.

Course Content:

Newer Technologies in Diesel and Petrol Injection and Vehicle Diagnosis

Hardware and Software.

Place:

BTC (Naganathapura, Bengaluru), RTCs and LTCs.

Course for New Entrants (AA)

Course Code:

AAN

Duration:

Five days.

Objective:

Product Knowledge on all AA products.

Participants:

All newly joined AA employees.

Course Content:

Overview and understanding of Diesel Fuel Injection Systems, Gasoline Systems,

Diagnostic Equipment and Automotive Accessories of Bosch.

Place:

BTC (Naganathapura, Bengaluru) (On request).

Course for Employees from Bosch Group (India)

14

Course Code:

RB-IND

Duration:

Three days.

Objective:

To help participants understand the role of Systems in Automobiles.

Participants:

Personnel employed with Bosch Group companies.

Course Content:

Overview and understanding of various vehicle systems with focus on Bosch

Automotive products.

Place:

BTC (Naganathapura, Bengaluru) (On request).

14

Courses Regional/ Local Training Centres

(RTC/ LTC)
Courses on Diesel Fuel Injection

15

Course Code:

PE

Duration:

Three days.

Objective:

To make the participants competent in carrying out quality service on Diesel Fuel
Injection Equipment (PE Pumps).

Participants:

Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and
independent workshops handling Bosch Fuel Injection Equipment.

Course Content:

Working Principle, Repair and Testing of PE Multi-cylinder Pumps fitted with RSV
and RQV Governors, Injection Timer, Feed Pump and Filters, MPC unit and all other
Add-on Modules, Removal and Fitment of FIE on the Vehicle and Setting of Fuel
Injection Timing.

Place:

RTCs/ LTCs.

Course Code:

VE - 1

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment (VE Pumps).

Participants:

Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and
independent workshops handling Bosch FIE.

Course Content:

Working Principle, Repair and Testing of VE Pumps fitted with Mechanical Governors.
Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel Injection
Timing.

Place:

RTCs/ LTCs.

Course Code:

VE - 2

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment (VE Pumps with Add-on Modules).

Participants:

Fuel Injection Equipment Service Personnel from Bosch Authorised Workshops and
independent workshops handling Bosch Fuel Injection Equipment.

Course Content:

Working Principle, Repair and Testing of VE Pumps with MPC and all other Add-on
Modules. Filters, Removal and Fitment of FIE on the Vehicle and Setting of Fuel
Injection Timing.

Place:

RTCs/ LTCs.

16

Course Code:

PF

Duration:

One day.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment.

Participants:

Fuel Injection Equipment Service Personnel, preferably Bosch Authorised

Representatives, Engineers/ Technicians from OEMs.

Course Content:

Working Principle, Repair and Testing of PF and PFR Fuel Injection Pumps, Injectors,
Importance of BDC dimension and adjustment.

Place:

RTCs.

Course Code:

EDC

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Bosch VE Fuel

Injection Pumps with Electronic Diesel Control (VP-37).

Participants:

Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives,

Engineers/ Technicians from OEMs, equipped with EPS 611/ 620 + EDC Tools.

Course Content:

Basics of EDC System, Working Principle, Repair, Testing and Adjustment of Bosch
Distributor-type Fuel Injection Pump (VP-37) and Injectors.

Place:

RTCs/ LTCs.

Course Code:

VS

Duration:

One day.

Objective:

To make participants understand the importance of Injection Timing and

competent in setting Injection Timing on Diesel Vehicles fitted with PE and
VE-type Fuel Injection Pumps.

Participants:

Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives,

Engineers/ Technicians from OEMs and Diesel Mechanics.

Course Content:

Basic knowledge on FIE products, Setting Injection Timing on Diesel Vehicles

fitted with PE and VE-type Fuel Injection Pumps, General Maintenance Tips
and Warranty Terms.

Place:

RTCs/ LTCs.

Course Code:

PE - 1

Duration:

Two days (on request).

Objective:

To make participants equipped with Heavy-Duty Test Bench competent to carry out
quality service on Fuel Injection Equipment.

Participants:

Fuel Injection Equipment Service Personnel from Bosch Authorised Representatives,

equipped with Heavy-Duty Test Bench EPS 611/ 620.

Course Content:

Working Principle, Repair and Testing of Bosch PE...P-type Fuel Injection Pumps with
RQV-K Governor and Injectors.

Place:

RTCs(on request)/ LTCs.

16

Course on Gasoline Fuel Injection

Course Code:

GFI - 1

Duration:

One day.

Objective:

To educate participants about newer technologies in Gasoline Systems.

Participants:

Bosch Territory Managers Sales and Service, Bosch Authorised Distributors Field
Representatives, Bosch Authorised Product Stockists, BCS, etc. (by invitation).

Course Content:

Working of Gasoline Engines and Working Principle of Multi-Point Fuel Injection

System and Vehicle Diagnostics.

Place:

RTCs/ LTCs.

Course on Auto Electrical

Course Code:

AEL - 1

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Bosch Auto

Electrical Products.

Participants:

Auto Electricians working in Bosch Authorised Workshops.

Course Content:

Working Principle, Repair and Testing of Bosch Auto Electrical Products and
Respective Test Equipment. Removal and fitment of Alternators/ Starter Motors
on Vehicle.

Place:

RTCs/ LTCs.

Courses on Bosch Battery

17

Course Code:

BB

Duration:

One day.

Objective:

To make participants competent in selling Bosch Batteries effectively and

handling warranty.

Participants:

Bosch Authorised Distributors, Stockists, Dealers and Workshop Personnel handling

battery sales.

Course Content:

Construction and Working Principle, Features, Advantages and Benefits, Product

Range, Charging, Testing, Using BAT 121, Competitors Information, Opportunity
Areas, Sales Arguments, Effective Campaigning and Warranty Handling.

Place:

RTCs/ LTCs.

Course Code:

VEH

Duration:

One day.

Objective:

To provide basic knowledge on Vehicle Systems.

Participants:

Students from Polytechnics, Newly appointed

Technicians employed with Bosch Authorised
Representatives.

Course Content:

Diesel Engine Basics, Fuel Injection System Basics

and other Vehicular Systems.

Place:

RTCs/ LTCs.

Seminars Techno-commercial

18

Course Code:

BWF

Duration:

One day.

Objective:

To make Bosch Authorised Workshop Foremen competent in carrying out quality

service on Bosch FIE and AE Products, thus ensuring customer satisfaction.

Participants:

Foremen working in Bosch Authorised Workshops.

Course Content:

Advanced knowledge on all Bosch Products, FIE, AE and Automotive Accessories,

Warranty Administration, Attending Customers, Safety and Housekeeping,
Troubleshooting of Vehicles, Effective Field Campaigning and Tips on Developing the
Service Business.

Place:

RTCs.

Course Code:

OECD

Duration:

One day.

Objective:

To provide knowledge on Bosch Products and Marketing Policies.

Participants:

Works Managers and Technicians working with OECDs.

Course Content:

Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their

Quality, Features, Schemes and Warranty Terms.

Place:

RTCs/ LTCs.

Course Code:

FO

Duration:

One day.

Objective:

To provide knowledge on Bosch Products.

Participants:

Proprietors, Partners and Technicians from Fleet Operators.

Course Content:

Basic knowledge on Bosch Products, Maintenance Aspects, their Quality, Features

and Warranty Terms.

Place:

RTCs/ LTCs.

Course Code:

IE

Duration:

One day.

Objective:

To provide knowledge on Bosch Products.

Participants:

Electricians having their own garages.

Course Content:

Basic knowledge on Bosch Auto Electrical Products, Maintenance Aspects, their

Quality, Features and Warranty Terms.

Place:

RTCs/ LTCs.

18

19

Course Code:

CSM

Duration:

One/ Two days.

Objective:

To make Bosch Authorised Workshop Counter Salesmen competent in attending

customers profitably and ensuring customer satisfaction.

Participants:

Counter Salesmen working in Bosch Authorised Workshops.

Course Content:

Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, Warranty

Administration, Attending Customers, Effective Field Campaigning and Tips on
Developing the Service Business.

Place:

RTCs/ LTCs.

Course Code:

PMW

Duration:

One day.

Objective:

To provide knowledge on latest products, Test and Diagnostic Equipment.

Participants:

Proprietors of Bosch Authorised Workshops.

Course Content:

Information on Latest Products, their Features, Advantages and Benefits, Test and
Diagnostic Equipment required for the Workshop.

Place:

RTCs (On request).

Course Code:

CRO

Duration:

One day (on request).

Objective:

To provide basic knowledge on all Bosch Products, Test and Diagnostic Equipment,
Handling, Storage and Shelf Life.

Participants:

Customer Relations Officers at various Sales Offices, Personnel employed with

C&F Agents.

Course Content:

Information on all Bosch Products, their Applications and Usage, Test and Diagnostic
Equipment used by customers.

Place:

RTCs (On request).

Courses for State Transport Undertakings

20

Course Code:

STU - 1

Duration:

Two days.

Objective:

To provide knowledge on Bosch Products.

Participants:

Technicians working with State Transport Undertakings and other Government

Departments.

Course Content:

Basic knowledge of Bosch Products, Maintenance Aspects, their Quality, Features

and Warranty Terms.

Place:

RTCs/ LTCs.

Course Code:

STU - 2

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment, Auto Electrical and other Bosch Products.

Participants:

Nominated Personnel from State Transport Undertakings.

Course Content:

Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators, Starter

Motors and other Bosch Automotive Accessories.

Place:

RTCs/ LTCs.

Course Code:

WTY

Duration:

One day.

Objective:

To make participants competent in handling Warranty Issues.

Participants:

Bosch Authorised Workshops, Bosch Authorised Distributors Field Representatives,

Bosch Authorised Product Stockists, BCS, etc.

Course Content:

Manufacturing codes, Warranty Terms and Procedures.

Place:

RTCs/ LTCs.

20

Courses for Sales Personnel

Course Code:

PFR - 4W

Duration:

One/ Two days.

Objective:

To make participants competent in handling Bosch Products and related

market issues.

Participants:

Field Representatives working with Bosch Authorised Network.

Course Content:

Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their

Quality, Features, Customer Service Issues and Warranty Administration.

Place:

RTCs/ LTCs.

Course Code:

BS

Duration:

One day.

Objective:

To make participants competent in handling Bosch Products and related

market issues.

Participants:

Bosch Authorised Stockists, Proprietors/ Partners.

Course Content:

Basic knowledge on Bosch Products, FIE, AE and Automotive Accessories, their

Quality, Features and Schemes, Selling Skills, Spare Parts Inventory Planning,
Customer Service Issues and Warranty Administration.

Place:

RTCs/ LTCs (On request).

Course on 2-Wheeler Products

21

Course Code:

PFR - 2W

Duration:

One day.

Objective:

To make the participants competent in handling the Bosch 2-wheeler Product Range
and related issues in the market.

Participants:

Bosch Authorised 2-wheeler Distributors, Proprietors/ Partners.

Course Content:

Basic Knowledge on the Bosch 2-wheeler Product Range, Quality, Features, Customer
Service Issues and Warranty Administration.

Place:

RTCs/ LTCs.

Courses on Workshop & Test Equipment

Course Code:

WTE - 1

Duration:

One/ Two days.

Objective:

To enable participants to understand the Bosch Test Equipment range and basic
troubleshooting.

Participants:

Bosch Authorised Workshop Personnel nominated to handle Test Equipment.

Course Content:

Practical Demonstration and Troubleshooting of Workshop Equipment like FIE Test

Bench, AE Test Bench, BAT 121, Battery Charger, etc.

Place:

RTCs.

Course Code:

BWSS

Duration:

Two days.

Objective:

To enable participants to become competent in using ESI[tronic] and MSI.

Participants:

Bosch Car Service/ Bosch Authorised Workshop Personnel nominated to

handle ESI/ MSI.

Course Content:

Practical Demonstration of ESI/ MSI and Practice by Participants, Workshop

Reports, Manufacturing Codes, Warranty Terms and Procedures.

Place:

RTCs/ LTCs.

Course for Defence Personnel

Course Code:

DEF - 1

Duration:

Two days.

Objective:

To make participants competent in carrying out quality service on Diesel Fuel

Injection Equipment, Auto Electrical and other Bosch Products.

Participants:

Nominated Personnel from Defence Organisations.

Course Content:

Working Principle, Repair and Testing of PE Multi-cylinder Pumps, Alternators,

Starter Motors and other Bosch Automotive Accessories.

Place:

RTCs.

Course for OE Customers

22

Course Code:

OEM

Duration:

Two days.

Objective:

To provide knowledge on Bosch Products (FIE and AE) and to apprise participants
of the latest developments in Bosch Products.

Participants:

Managers/ Engineers of OEMs manufacturing Diesel Engines and Vehicles.

Course Content:

Design, Working Principle, Test Procedure of Bosch Products (FIE and AE),
and Latest Developments.

Place:

RTCs/LTCs.

22

Courses for Students and Lecturers

23

Course Code:

NEI - 1

Duration:

One day.

Objective:

To make participants knowledgeable about newer automotive technologies.

Participants:

Final year students from technical educational institutes.

Course Content:

Newer Technologies in Diesel and Petrol Injection, Vehicle diagnosis Hardware

and Software, and Product Knowledge on Newer Automotive Technologies
and Accessories.

Place:

RTCs/ LTCs.

Course Code:

INS

Duration:

One day.

Objective:

To provide knowledge on all Bosch Products, Test and Diagnostic Equipment.

Participants:

Lecturers from Engineering colleges, Polytechnics and other Educational Institutions.

Course Content:

Basic knowledge on all Bosch Products, Test and Diagnostic Equipment and
Latest Developments.

Place:

RTCs/ LTCs.

Courses for Bosch Car Service (BCS)

Course Code:

BCS - 1 Basic Module

Duration:

Two days.

Objective:

To enable operating level Bosch Car Service Personnel understand the concept and
make them competent in Vehicle Diagnosis.

Participants:

Bosch Car Service Technicians.

Course Content:

1. Engine tuning and performance testing

2. Clutch introduction and maintenance
3. Steering and wheel alignment
4. Brake system
5. Suspension system
6. Battery starter and Alternator maintenance
7. Application of KTS

Place:

RTCs/ LTCs.

Course Code:

BCS - 2 Advanced Module

Duration:

Five days.

Objective:

To make Bosch Car Service Personnel competent in handling business, customer

service and technical issues.

Participants:

Bosch Car Service Works Incharge.

Course Content:

1. Industry, service marketing, customer service

2. Introduction to Petrol & Diesel Injection system, Different Generations
3. Diagnosis & Troubleshooting using KTS
4. Practical demonstration on the vehicle

Place:

24

BTC (Naganathapura, Bengaluru).

24

Course Code:

EEM - 1 (Electricals/ Electronics Module 1) Basic Module

Duration:

Three days.

Objective:

Refreshing the basics of vehicle electrical system & vehicle electronic

system. Test possibilities of different systems in the vehicle.

Participants:

Vehicle Mechanic/ Electrician and Automotive Engineer with limited

knowledge of the field of Vehicle Electric System/ Electronic System.

Prerequisite:

Knowledge of ESI[tronic] and Bosch Tester Application

Course Content:

1. Ohms law as well as Electro-Technical basics

2. Design and mode of Operation of Electrical Systems

3. Measurement of Electrical Systems with different measurement

4. Devices such as multimeter, ammeter, voltmeter as well as engine tester

5. Understanding the simple Electronic circuits/ Components

6. Practical implementation of theoretical knowledge by measurement exercises

directly on the vehicle
7. Understanding and trouble shooting of the wiring system on the Vehicle

Place:

BTC (Naganathapura, Bengaluru), RTCs and LTCs.

Course Code:

BCCE (Body and Comfort and Convenience Electronics) Expert Module

Duration:

Two days.

Participants:

Vehicle mechanic/ electrician/ motor mechatronic engineer, Automotive engineer

/ master mechanic with good knowledge for application of ESI(tronic) & Bosch
testing devices KTS.

Prerequisite:

Safe dealing with diagnostic device KTS and ESI[tronic]

Course Content:

Installation and functioning of Air Conditioner and components. Components of

hydraulic circuits for throttle and expansion valve. Assembly and function of
Air-condition control.
Components of air conditioner control such as switch, sensor, actuator motor &
control unit.
Testing of systems in the vehicle with help of ESI[tronic], CAS/ CAS (plus)
KTS 550/ 570
Developing diagnostic strategies and detection of diagnosis possibilities primarily in
complete system of vehicle. Practical operation in vehicles which are equipped with
the above mentioned systems.

Place:

RTCs and LTCs.

Course Code:

CAN (Automotive Networking) Expert Module

Duration:

One day.

Objective:

Understanding the set-up and functions of the networked

systems in the vehicle and their testing possibilities.

Participants:

Motor Mechanic with knowledge of Vehicle's Electric/ Electronic

System, Automotive Engineer, Vehicle Electrician

Prerequisite:

Safe dealing with diagnostic device KTS and ESI[tronic].

Course Content:

1. Principle set-up of CAN database

2. Design and differences of different bus systems
3. CAN protocol set-up
4. Network topology
5. Dos & Donts CAN system
6. Display measurement possibilities using KTS

Place:

25

BTC (Naganathapura, Bengaluru), RTCs and LTCs.

Course Code:

EPSV (Electronic Power Steering) Advanced Module

Duration:

Two days.

Objective:

Independent execution of diagnostics/ repair and maintenance

work in Electronic Power Steering.

Participants:

Vehicle Mechanic/ Electrician/ Automotive Engineer/ Master Mechanic with good

knowledge for application of ESI[tronic] & Bosch testing devices KTS.

Prerequisite:

Knowledge of training course ESI[tronic] and Bosch tester application.

Course Content:

1. Basic knowledge on mechanical steering system

2. Basic knowledge on steering geometry
3. Limitation in mechanical steering system
4. Inspection of mechanical components
5. Overview of EPS and components
6. Different EPS modules
7. Self diagnosis on vehicle
8. Trouble/ testing of the components using KTS

Place:

BTC (Naganathapura, Bengaluru).

Course Code:

MTS&A (Measurement, Testing of Sensors and Actuators) Advanced Module

Duration:

Two days.

Objective:

Basic knowledge base for specific diagnosis of faults in vehicle with main focus on
safe and effective handling of various systems in the vehicle.

Participants:

Motor Mechanic/ Motor Electrician/ Motor Mechatronic

Engineer/ Automotive Engineer.

Prerequisite:

Knowledge of ESI[tronic] and Bosch tester application

Course Content:

Summary of diagnosis with measuring devices such as

1. Multimeter
2. Engine tester KTS
3. Dealing with electrical circuits
4. Sensors & Actuators in following systems
5. MPFI system
6. Common Rail System
7. Ignition (Distributor-type & Distributor-less Electronic)
8. Explanation and evaluation of different output and input signals.
9. Independent operation with ESI[tronic], KTS, multimeter.
Place:

RTCs and LTCs.

Course Code:

EBM (Electrical Battery Management and Electrical On-board

Supply Charging Systems) Advanced Module

Duration:

Two days.

Objective:

Independent execution of testing and maintenance work

in the vehicle on different systems

Participants:

Motor Mechanic/ Motor Electrician/ Automotive Engineer with good technical

knowledge and knowledge of Electronic System.

Prerequisite:

Safe dealing with diagnostic device KTS and ESI[tronic].

Course Content:

Design & mode of operation of following systems

1. Testing of generators
2. Testing of starters
3. New generators
4. Signals from modern generators DFM, W, S
26

26

5. Start/ Stop system

6. Testing and Maintenance of Battery
7. Practical work on vehicles which are equipped with the above mentioned systems
8. Testing of systems in the vehicle with the help of ESI[tronic].
9. CAS/ CAS (plus) and KTS.
Place:

BTC (Naganathapura, Bengaluru).

Course Code:

EXS (Exhaust system & after-treatment in passenger car) Expert Module

Duration:

Two days.

Objective:

Independent fault detection of faults in exhaust system in passenger car.

Participants:

Motor Mechanic/ Motor Electrician/ Automobile Engineer knowledge

in the field of Gasoline/ Diesel System

Prerequisite:

Technical knowledge of the Basic fundamentals of Gasoline & Diesel Engine

Management System. Practical experience in application of ESI[Tronic] as well
as in handling KTS is advantageous.

Course Content:

1. Emission norms ( BS IIV)

2. Exhaust gas in the Gasoline & Diesel engine
3. Lambda Sensor & NOx sensor measuring principle, types, testing possibilities,
Dos & Don'ts
4. Possibilities for the after-treatment of exhaust gas in the passenger car
Testing of components and systems by applying KTS in connection with ESI[tronic]
and Bosch Emission Testing Equipments in the passenger car

Place:

BTC (Naganathapura, Bengaluru), RTCs/ LTCs.

Course Code:

CRSD (Diagnosis of Bosch Common Rail Systems passenger car)

Advanced Module

Duration:

Two days.

Objective:

Understanding the functions of ECU Self diagnostics of CRS.

Specific detection of faults in Bosch Passenger Car Common Rail systems.

Participants:

Motor Mechanic/ Motor Electrician/ Automobile Engineer/ Master Mechanic with

practical experience in the field of Automotive Diesel System and vehicle diagnostics.

Prerequisite:

Safe dealing with diagnosis device KTS and ESI[tronic].

Technical knowledge of Common Rail system.

Course Content:

Design and functions of different Bosch Common Rail Generations. Sequence and
operating modes of diagnosis software as well as individual test functions with
Bosch Diagnostic tester KTS.
Diagnostic strategies and specific detection of faults as well as fault rectification
Testing of Low-pressure/ High-pressure circuit using Bosch Diesel sets 1 & 3.
Testing of Back flow using Injector return flow measuring device.

Place:

BTC (Naganathapura, Bengaluru) & RTCs.

Course Code:

VM (Vehicle Mechanic - Passenger Car) Advanced Module

Duration:

Four days.

Objective:

Fault detection and rectification of faults in suspension, Steering geometry,

Clutch system, different sub-systems (cooling, intake, exhaust, lubrication & main
components) of the engine.

Participants:

Basic training for Motor Mechanic/ Automobile Engineer

Course Content:

1. Design and mode of operation of individual assemblies of engine mechanics,

like crankshaft drive, valve train, variable valve control, engine lubrication and
engine cooling.

2. Evaluation of engine mechanics by suitable testing procedure especially

compression test, pressure loss test.
27

3. Repair and diagnostics of individual components of clutch

(e.g. dual-mass flywheel and self-adjusting clutch)
4. Diagnostics and adjustment of modern chassis and its individual components
such as shock absorber, suspension and assisted Steering systems.
5. Requirements for wheel and tyre, wheel balancing
6. Introduction to TPMS (Tyre Pressure Monitoring System)
7. Practical work on vehicles
Place:

BTC (Naganathapura, Bengaluru).

Course Code:

BRM (Mechanical Braking) Basic Module

Duration:

Two days.

Objective:

Understanding the Basic mechanical braking system, components,

inspecting and testing.

Participants:

Basic training for Motor Mechanic/ Automobile Engineer

Course Content:

1. Fundamentals of braking system

2. Different type of brake system (mechanical, hydraulic, air)
3. Different brake system circuits
4. Familiarisation of brake system components and its function
5. Inspection and testing of the main components of the brake system
6. Removal & replacement method for brake pad, cylinders, etc.
7. Measurements: Wheel hub, brake disc, wear test, pressure test
8. Classification of brake fluids and importance
9. Brake bleeding and Brake pedal setting
10. Troubleshooting instruction

Place:

BTC (Naganathapura, Bengaluru), RTCs and LTCs.

Course Code:

BRE (Electronic Braking system) Advanced Module

Duration:

Two days.

Objective:

Understanding the Anti-lock braking system, components,

inspection, troubleshooting & testing.

Participants:

Basic training for Motor Mechanic/ Automobile Engineer

Course Content:

1. Limitations of mechanical braking system

2. Introduction & advantage of ABS
3. Understanding braking force, co-efficient of friction
4. Understanding the braking force in different road conditions
5. Location and function ABS components
6. Understanding of different type of wheel speed sensors
7. Function of Bosch ABS system: ABS 2S, ABS 2E, ABS 5.0, ABS 8.0
in the areas of hydraulics and electricals
8. Understanding the Wiring diagram of ABS
9. ABS: Self diagnosis & SIS on car using KTS, guided troubleshooting
10. ABS bleeding
11. Repair & Safety instructions
12. Introduction to TCS/ ESP

Place:

28

BTC (Naganathapura, Bengaluru).

28

Course Code:

SRS (Supplementary Restraint System)

Duration:

One day.

Participants:

Vehicle mechanic/ Electrician/ Motor mechatronic engineer, Automotive engineer/

Master mechanic with good knowledge on application of ESI [tronic] & Bosch testing
devices (KTS).

Prerequisite:

Safe dealing with diagnostic device KTS and ESI[tronic]

Course Content:

1. Safety specifications and workplace instructions dealing with airbag. Overview of

Bosch airbag systems.
2. Assembly and functioning of passive safety systems. Airbag module (driver,
passenger window pad), sensor technology of restraint systems. Additional
functions such as roll-over protection, safety battery terminal, active head restraint,
diagnostics and repair possibilities with ESI[tronic] and KTS.
3. Testing of systems in the vehicle with help of ESI[tronic], CAS/ CAS (plus)
KTS 550/ 570
4. Developing diagnostic strategies and detection of diagnosis possibilities primarily
in complete system of vehicle. Practical operation in vehicles which are equipped
with the above mentioned systems.

Place:

BTC (Naganathapura, Bengaluru)

Course Code:

BP

Duration:

One day.

Objective:

To make participants competent in dealing with Bosch Brake Pads.

Participants:

BCS Personnel, Bosch Authorised Product Stockists, Bosch Authorised Stockists

dealing in Brake Pads.

Course Contents:

Working principle of Disc Brakes and FABs of Bosch Brake Pads.

Place:

RTCs/ LTCs.

Course Code:

DG

Duration:

Two days.

Objective:

To make participants competent in handling Advanced Diagnostic Equipment like

KTS, BAT and other Test Equipment.

Participants:

Personnel employed with Bosch Authorised Workshops and BCS.

Course Contents:

Diagnosis on vehicles using KTS, BAT and other Test Equipment.

Place:

RTCs and LTCs.

29

Courses for Express Bike Service (EBS)

30

Course Code:

EBS

Duration:

Two days.

Objective:

To educate participants about maintenance tips in 2 wheelers, Bosch DG Equipments

for 2 wheelers, Bosch product knowledge and warranty terms and conditions.

Participants:

Bosch Territory Managers Sales and Service, Bosch Authorised Distributors' Field
Representatives, Bosch Authorised Product Stockist, EBS Dealers.

Course Contents:

Working of Gasoline Engines and Maintenance of the vehicle.

Place:

BTC (Naganathapura, Bengaluru)

30

Training Centres

Parag Kavthekar
North

M.C. Pant
West

T. Nagaraj Venkatesha G. G.
Bengaluru
Bengaluru

Ajay Kumar M. Shweta Wali

Bengaluru
Bengaluru

K. Aravind
South

BTC - Bosch Training Centre

Naganathapura, Bengaluru.
RTCs - New Delhi, Kolkata,
Pune and Chennai.
LTCs - Chandigarh, Jaipur, Lucknow,
Guwahati, Raipur, Indore, Nagpur,
Ahmedabad, Ernakulam, Hubli and
Secunderabad.

31

Accommodation and Transport Details Bengaluru

At Hosur Road between Bosch,
Adugodi and Naganathapura Plant
1. Krishna Rooms
No. 77, Hosur Main Road
Near Ayyappa Temple, Madiwala
Bengaluru - 560 068
Ph.: (080) 2552 5723/24/25
*Tariff:
Rs. 995 + Tax (Double, Non-AC),
Rs. 1650 + Tax (Double, AC)
Other hotels in the city:
1. Brindavan Hotel
M.G. Road
Bengaluru - 560 001
Ph.: (080) 2558 4000
**Tariff:
Rs. 624 (Single, Non-AC),
Rs. 780 (Double, Non-AC),
Rs. 1116 (Single, AC),
Rs. 2475 (Double, AC)
2. Hotel Gautam
17, Museum Road
Bengaluru - 560 001
Ph.: (080) 2558 8764
**Tariff:
Rs. 600 (Single, Non-AC),
Rs. 800 (Double, Non-AC)

5. Sri Ramakrishna Lodge

Subedar Chatram Road
Bengaluru - 560 009
Ph.: (080) 2226 3042

8. Hotel Sunflower
129, Brigade Road
Bengaluru - 560 025
Ph.: (080) 2557 1945

**Tariff:
Rs. 310 (Single, Non-AC),
Rs. 590 (Double, Non-AC)

**Tariff:
Rs. 700 (Double, Non-AC),
Rs. 1200 (Double, AC)

6. Woodlands Hotel
5, Sampangi Tank Road
Bengaluru - 560 025
Ph.: (080) 2222 5111
*Tariff:
Rs. 1900
Rs. 2200
Rs. 3100
Rs. 3000
Rs. 3900

Transportation
There are frequent bus services at
intervals of 30 min. from all the three
major bus stations in Bengaluru
to Nagnathapura.

+ Tax (Double, Non-AC),

+ Tax (Non-AC, Deluxe),
+ Tax (AC, Deluxe),
(Executive Room),
+ Tax (AC Cottages)

7. Hotel Ajantha
22-A, M.G. Road
Bengaluru - 560 001
Ph.: (080) 2558 4321

Given below is a list of bus numbers

from each bus station.
From K.R. Market
Bus No. 346J
From Majestic
(Kempe Gowda Bus Station/
Central Bus Station)
Bus No. 347F
From Shivajinagar
Bus No. 347G

**Tariff:
Rs. 510 (Single, Non-AC),
Rs. 795 (Double, Non-AC),
Rs. 1230 (Deluxe Room),
Rs. 1400 (Cottage Room)

Note: The hotel rates mentioned are

only indicative. Tariffs may vary.
* Rates exclusive of taxes
** Rates inclusive of taxes

3. Hotel Harsha
Shivajinagar
Bengaluru - 560 051
Ph.: (080) 2286 5566
**Tariff:
Rs. 4500 (Single, AC Deluxe),
Rs. 5000 (Double, AC Deluxe)

Kanteerava
Stadium

4. Hotel Prashanth
21, East Tank Bund Road
Bengaluru - 560 009
Ph.: (080) 2287 4041
*Tariff:
Rs. 450 + Tax (Single, Non-AC),
Rs. 600 + Tax (Double, Non-AC),
Rs. 850 + Tax (Double, AC)

Bosch Limited
Bosch Training Centre
Naganathapura Plant
Electronic City P.O.
Post Box No. 6887, Bengaluru - 560 100
Ph.: (080) 4103 5541/2/3/0
Telefax: (080) 2852 1239/2852 1608
E-mail: [email protected]

32

[email protected]

[email protected]

32

North Region

Accommodation New Delhi

All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Hotel Bhagirath Palace
Opp. Red Fort
Chandni Chowk
New Delhi - 110 006
Ph.: (011) 2386 6223/ 2386 6723

4. Hotel Regal
Shyama Prasad Mukherjee Marg
New Delhi - 110 006
Ph.: (011) 2394 3999/ 2397 9115
5. Hotel Tourist
Ram Nagar, Pahar Ganj
New Delhi - 110 055
Ph.: (011) 2361 0334-340

2. Wood Inn Hotel

8, Local Shopping Centre
Kirti Nagar
New Delhi - 110 015
Ph.: (011) 2543 8500/ 2543 9136

6. Rail Yatri Nivas

New Delhi Railway Station
New Delhi - 110 002
Ph.: (011) 2323 3484

3. Vivek Hotel
1534 - 50, Main Bazar, Pahar Ganj
New Delhi - 110 055
Ph.: (011) 5154 1435/ 5154 1436

Bosch Limited
Bosch Training Centre
C/o Sunehri Exports, Plot No. B-1/ E24
Mohan Co-operative Industrial Estate,
Mathura Road,
New Delhi - 110 044
Mobile: +91 98713 07355
E-mail: [email protected]

33

NEW DELHI

Accommodation Chandigarh
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Hotel Deep Palace
SCF - 248, Motor Market
Manimazra, Chandigarh
Ph.: (0172) 273 1973
Tariff:
Rs. 150 (Standard Single, Air Cooled),
Rs. 200 (Standard Double, Air Cooled),
Rs. 350 (AC)
2. Hotel Chander Palace
SCO - 453 - 454
Near Dhillon Complex
Motor Market, Manimazra
Chandigarh
Ph.: (0172) 273 4152
Tariff:
Standard AC Room:
Rs. 300 (Twin-sharing basis)
Rs. 400 (Single, Deluxe)

3. Hotel Indian Palace

SCF - 13 - 14, Motor Market
Manimazra, Chandigarh
Ph.: (0172) 273 9994
Tariff:
Rs. 350 (Single Standard, Air Cooled),
Rs. 450 (Double, Standard AC),
Rs. 650 (Double, Deluxe AC)
4. Hotel J. D. Residency
SCS - 116, Sec 58
Mohali - 160 059
Ph.: +91 98885 06734
Tariff:
Rs. 1500 (Twin-sharing basis)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.

Rayat-Bahra Group
of Institutes, NH 205

Bus Stand
Sector 43
Chandigarh
Railway Station
Chandigarh
International
Airport

Panchkula
Sector 9

Bosch Limited
Local Training Centre (LTC)
Rayat Bahra Skill Development Centre (COC)
VIII, Sahauran, Near Kharar
(12 Kms from Chandigarh on NH 21)
Dist. Mohali - 140 104
Punjab
Tel: +91 160 5009665

34

34

Accommodation Jaipur
All the participants are advised to arrange their own accommodation as required.
Given below is a recommended hotel:

1. Hotel Broadways
Transport Nagar, Agra Road, Jaipur
Ph.: (0141) 511 2010/11, 264 1275
Tariff:
Rs. 300 (Twin-sharing basis)
Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited
Local Training Centre (LTC)
C/o Arora Diesels
Akash Deep Building
A-5, Transport Nagar
Jaipur - 302 004

35

Accommodation Lucknow
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Hotel Aadharshila
VIP Road, Alambagh, Lucknow
Ph.: (0522) 246 0550
Tariff:
Rs. 550 (Standard),
Rs. 650 (Semi Deluxe),
Rs. 850 (AC, Deluxe)
2. Hotel Rangoli
Near Hardoi Bus Stand, Charbagh
Lucknow
Ph.: (0522) 263 5926/ 263 5902/ 263 5293

3. Hotel Pooja
Charbagh, Lucknow
Ph.: (0522) 245 7525
Tariff:
Rs. 200 (Single Bed, Attached Bathroom),
Rs. 250 (Double Bed, Attached Bathroom)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.

Tariff:
Rs. 250 (Air Cooled, Single Bed),
Rs. 450 (Air Cooled, Double Bed),
Rs. 650 (Single Bed, AC Deluxe),
Rs. 90 (Dormitory)

Bosch Limited
Local Training Centre (LTC)
C/o Raman Diesels
D-1, Transport Nagar
Lucknow - 226 012

36

36

South Region

Accommodation Chennai
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
4. Royal Guest House
Old No. 26, New No. 4, Boobegam Street,
Chennai - 600 002
Ph.: (044) 2861 1044, 45

1. Sri Ramakrishna Nivas

No. 1, Woods Road,
Annasalai, Chennai - 600 002
Ph.: (044) 2860 3329/ 2860 2154
2. Regency Golden Sun Hotel
No. 1, Hanumanth Rao Street
T. Nagar, Chennai - 600 017
Ph.: (044) 2828 2772
3. Rohini International
No. 67, G.N. Chetty Road, T. Nagar
Chennai - 600 017

Tariff:
Rs. 250 (Single room)
Rs. 350 (Double room)

5. Sarvana Lodge
Next to Hotel Sarvana Bhavan,
T. Nagar, Chennai - 600 017

Tariff:
Rs. 280 (Single room)
Rs. 350 (Double room)

Note: The hotel rates mentioned are only indicative and

exclusive of taxes. Tariffs may vary.

Bosch Limited
Bosch Training Centre
Blossom Centre
Old No. 27, New No. 30, North Boag Road
T. Nagar, Chennai - 600 017
Ph.: (044) 2815 3916/2815 3917
Mobile: 091766 40990
E-mail: [email protected]

37

Accommodation Hubli
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. The Hans Hotel
P.B. Road, Vidyanagar
Hubli - 580 031
Ph.: (0836) 237 4770
2. Hotel Canara
P.B. Road, Hosur
Hubli - 590 021
Ph.: (0836) 237 2561
3. Hotel Chalukya
Club Road
Hubli - 590 021
Ph.: (0836) 235 4234
4. Hotel Ambesh
Opp. Mirjankar Petrol Pump
P.B. Road
Hubli - 590 021
Ph.: (0836) 227 2378
5. Hotel Ayodya
Opp. Old Bus Stand
Hubli - 590 021
Ph.: (0836) 235 1951

Bosch Limited
Local Training Centre (LTC)
C/o Manickbagh Diesels
Baddi Building
Unkal Cross, P.B. Road
Hubli - 580 031

38

38

Accommodation Ernakulam
Given below is a list of few hotels:

1. City Gates Residency

Near IOC Petrol Pump, Muttom.
Ph.: (0484) 262 8387
Tariff:
Rs. 300 (Single room)
Rs. 400 (Double room)
2. M.I.K. Tourist Home
H.M.T Junction,
Kalamassery.
Ph.: (0484) 255 5010/ 646 1201
Tariff:
Rs. 400 (Single room)
Rs. 500 (Double room)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.

Bosch Limited
Local Training Centre (LTC)
C/o Surya Diesels,
Muttom, Thaikattukara P.O.,
Opposite Indian Oil Petrol Pump,
Aluva-683 106
Ernakulam
Ph.: (0484) 2626 381/ 2626 382
E-mail: [email protected]

39

ERNAKULAM

Accommodation Secunderabad
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Rajadhani Lodge
Plot No. CFZ/S-13A & B
Auto Nagar
Vijayawada Highway
Hyderabad - 500 070
Ph.: (040) 2412 3434
2. Taj Mahal Hotel
Patny Centre
Secunderabad - 500 003
Ph.: (040) 2781 2106
3. Hotel Basera
S.D. Road
Secunderabad - 500 004
Ph.: (040) 2770 3200

Bosch Limited
Local Training Centre (LTC)
C/o Secunderabad Engg. Corp.
Plot No. 6, Block No. 11
Autonagar, Hyderabad - 500 070

40

40

East Region

Accommodation Kolkata
All the participants are advised to arrange their own accommodation as required.
Given below is a recommended hotel:
1. Hotel Capella
49, R.A. Kidwai Road, Kolkata - 700 016
Ph.: (033) 2229 4365/ 224 98921
Tariff:
Rs. 395 (Single),
Rs. 450 (Single room, Twin-sharing basis),
Rs. 775 (Double room, Shared by 4)
Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited
Bosch Training Centre
Post Box No. 9044,
91-A, Park Street,
Kolkata - 700 016
Ph.: (033) 2217 2144/ 2217 5222

41

Accommodation Guwahati
All the participants are advised to arrange their own accommodation as required.
Given below is a recommended hotel:
1. Hotel Shyam Sarover
Near Ram Mandir, A.T. Road
Guwahati - 781 001
Ph.: (0361) 251 1577/ 254 1611
Tariff:
Rs. 100
2. Mayur Hotel
Paltan Bazar, Guwahati-781008
Opp. ASTC Bus Stand
Ph.: (0361) 2734855/56/57/58/59/60/61
(0361) 2739603/20/25
Tariff:
Rs. 160 (Single Economy)
Rs. 200 (Single Standard)
Rs. 290 (Single Deluxe)
Rs. 600 (Single Super Deluxe)
Rs. 299 (Double Economy)
Rs. 400 (Double Deluxe)
Rs. 700 (Double Super Deluxe)
Rs. 800 (Double Special Deluxe)
Rs. 900 (Double Executive)
Rs. 1200 (Double Premium)
Rs. 1000 (Junior Suite)
Rs. 1300 (Semi Suite)

5. Hotel Hornbill
Md Shah Road, Paltan Bazar,
Guwahati - 781008
Ph.: (0361) 2735401
Tariff:
Rs. 1400 (Single Deluxe) & Rs. 1600 (Double Deluxe)
Rs. 1600 (Single Luxury) & Rs. 2000 (Double Luxury)
Rs. 2200 (Single Executive) & Rs. 2600 (Double Executive)
Rs. 3600 (S Hornbill suite) & Rs. 3600 (D Hornbill Suite)
Rs. 9500 (S President suite) & Rs. 9500 (D President
Suite)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.

3. Hotel Eden
Opp. Bengali H. S. School, G.S. Road,
Paltan Bazar, Guwahati -781008
Ph.: (0361) 2739578, 2639963
Tariff:
Rs. 300 (Single Deluxe)
Rs. 550 (Single Deluxe)
Rs. 650 (Single Deluxe/ AC)
Rs. 1000 (Double Deluxe/ AC)
4. Hotel Rialto
GNB Road, Paltan Bazar,
Guwahati - 781001
Ph.: (0361) 2131210, 2734450
Tariff:
Rs. 1800 (Executive)
Rs. 1500 (Deluxe)
Rs. 1000 (Standard)

Bosch Limited
Local Training Centre (LTC)
C/o Guwahati Diesels
A.T. Road
Guwahati - 781 001

42

42

Accommodation Raipur
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Gass Memorial Centre
Opp. Raipur Diesels
Near Jai Stambh Chowk
K.K. Road, Moudhapara, Raipur
Ph.: (0771) 235 6532
Tariff:
Rs. 145 (Single),
Rs. 210 (Double)
2. Hotel Usabh Palace
K.K. Road
Near Gujarati School, Raipur
Ph.: (0771) 503 0824
Tariff:
Rs. 250 (Single),
Rs. 150 (Double),
Rs. 100 (Dormitory)
Note: The hotel rates mentioned are only indicative and exclusive of taxes. Tariffs may vary.

Bosch Limited
Local Training Centre (LTC)
C/o Raipur Diesels
Krishna Kumar Road
Raipur - 492 001

43

West Region

Accommodation Pune
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
8. Rajashri
Pimple Bhavan, Kharal Wadi, Pimpri, Pune - 411 018
Tariff: Rs. 500 - 1000
Ph.: (020) 2742 1749
Mobile: +91 77095 83152

1. Royal Park
Mumbai - Pune Road,
Behind Siddharth Motors, Kasarwadi
Tariff: Rs. 1000 - 2000
Ph.: (020) 4073 1111
Mobile: +91 98604 81343

9. Manoj
Alandi Road, Bhosari, Pune - 411 039
Tariff: Rs. 500 - 1000
Ph.: (020) 2742 1749
Mobile: +91 96041 31928

2. White House
Mumbai - Pune Road,
Near Jain Mandir, Opp. Jaishree Cinema
Chinchwad Station, Pune.
Tariff: Rs. 1000 - 2000
Ph.: (020) 6682 7954
3. Jayratna
J/P-114, J-Block, MIDC, Indrayani Nagar
Indrayani Chowk, Bhosari Industrial Estate,
Pune - 411 026
Tariff: Rs. 1000 - 2000
Ph.: (020) 2712 9911
Mobile: +91 95278 56603
4. Shreeyash
S/P-108, S Block,
MIDC Philips Co Landewadi,
Bhosari Industrial Estate, Pune
Tariff: Rs. 1000 - 2000
Ph.: (020) 2711 9911
Mobile: +91 98230 68188

Shahu
Maharaj Talav

5. Kamini
Shewale Complex, Opp. Elpro Company
Chinchwad, Pune - 411 033
Tariff: Rs. 1000 - 2000
Ph.: (020) 2735 4655

um

Mohan
Nagar

Shangavi
College

un

iP
ba
ay
w

gh

Hi

44

Bosch
(RTC)

Bosch Limited
Bosch Regional Training Centre,
C/o Don Bosco Vyawasaik Prashikshan Kendra,
Near St. Andrews School, Chinchwad (East),
Pune 411 019.
Ph.: (020) 6410 0558
(020) 6410 0559

Mosque

7. Kalpana
Sr No. 206/1, Station Road, Pune
Tariff: Rs. 1000 - 2000
Rs. 500 - 1000
Mobile: +91 93733 30177

Kalbhor Nagar
Bus/State
Transport Stop

Ol

6. Satellite
Lane No. 6, Koregaon Park
Land Mark Next to Kiva,
Pune - 411 001
Tariff: Rs. 1000 - 2000
Mobile: +91 93730 01377

a
hw
inc

ri

sa

ho

d-B

Rd

Ch

44

Accommodation Nagpur
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:

1. Dua Continental
Mount Road, Extension, Kamptee Road,
Nagpur - 440 001
Tariff: Rs. 1900 (AC: Single) Rs. 2300 (AC: Double)
Ph: (0712) 252 0802, 653 8801
2. LB Hotel
Mount Road, Extension, Kamptee Road,
Nagpur - 440 001
Tariff:
Rs. 1900 (AC: Single) Rs. 2300 (AC: Double)
Ph.: (0712) 661 6020, 661 6040
3. Hotel Nandini
129, Opp. Mayo Hospital,
CA Road, Nagpur - 440 018
Tariff:
Rs. 600 (Non AC: Single) Rs. 600 (Non AC: Double)
Rs. 750 (AC: Single) Rs. 850 (AC: Double)
Ph.: (0712) 272 2120

da
dwa

Chin
Rd

4. Hotel Rajhans
3, Central Avenue, Opp. Chandralok Building,
Nagpur - 440 018
Tariff:
Rs. 550 (Non AC: Single)
Rs. 800 (Non AC: Double)
Rs. 730 (AC: Single)
Rs. 1160 (AC: Double)
Ph.: (0712) 272 6075, 646 6152
Mobile: +91 98906 73302

Mangalwadi
Garden

IT Dept

NH 69

Anjuman
Jr College

Government
Polytechnic

LTC

Dept of
Metallurgy
Chindwada Rd

Sadabai Raisoni
Womens College

Gol Bazaar
Gaddigodam

Bosch Local Training Centre,

C/o Government Polytechnic,
Department of Automobile Engineering,
Near Mangalwarti Bazar, Sadar
Nagpur: 440 001.

45

Accommodation Ahmedabad
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Hotel Moni
Opp. Shakti Estate
Narol Isanpur Road
Ahmedabad
Tariff:
Rs. 300 (Single),
Rs. 400 (Double)
2. Hotel Prestige
Opp. Sai Diesels, Narol Cross Road
Near Vijay Transport, Ahmedabad
Tariff:
Rs. 250 (Single),
Rs. 350 (Double)
3. Hotel Ellis
Bridge, Opp.Town Hall,
Ashram Road, Ahemadabad
Ph.: 098240 26530/ 079 2657 5811

5. Hotel Kapadiya
Near, V. S. Hospital,
Opp. Mahak and Building, Ellis Bridge
Ph.: 093270 07923/ 079 2657 9571
Tariff:
Rs. 300 (Single),
Rs. 400 (Double)
Rs. 100 (Dormitory)
6. Hotel Gurukrupa
Ellis Bridge, Behind Town Hall, Ashram Road
Ph.: 079 2657 7174
Tariff:
Rs. 200 (Single),
Rs. 250 (Double)
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.

Tariff:
Rs. 300 to 500 (Single),
Rs. 400 to 625 (Double)
A/C Rooms at Extra Cost
4. Hotel Atithi
Opp. Kasturi Dining Hall,
Paldi, Ahemadabad
Ph.: 098250 39809/ 079 2658 2912
Tariff:
Rs. 200 to 300 (Single),
Rs. 300 to 400 (Double)

Bosch Limited
Local Training Centre (LTC)
C/o Sai Diesel Service
2/A, Geetabhavan
Opp. Vijay Transport
Near Kashiram Textile
Narol, Ahmedabad - 380 005

46

46

Accommodation Indore
All the participants are advised to arrange their own accommodation as required.
Given below is a list of hotels:
1. Hotel Mayur
39, Chhoti Gwal Toli
Opp. Madhu Milan Cinema
Indore
Ph.: (0731) 270 5786/ 270 6786
2. Hotel Parag Regency
Near Kibe Compound
Kamala Nehru School Road
Indore
Ph.: (0731) 504 2276
3. Hotel Uday Palace
7, Kibe Compound
Near Madhu Milan Talkies
Indore
Ph.: (0731) 270 4088
4. Hotel Poonam
Chhoti Gwal Toli
Near Patel Statue
Indore
Ph.: (0731) 252 2250/ 252 2273

Bosch Limited
Local Training Centre (LTC)
C/o Ujjain Diesels Pvt. Ltd.
118 - A, Transport Nagar
Indore - 452 001

47

5. Hotel Crown
Opp. Sarwate Bus Stand
Indore
Ph.: (0731) 252 2250/ 252 2273
6. Hotel New Sunder
17/2, South Tukoganj
Indore
Ph.: (0731) 252 9051/ 252 0128
7. Hotel Galaxy
Tower Chouraha
Indore
Ph.: (0731) 247 2602/ 244 0206
Note: The hotel rates mentioned are only indicative and
exclusive of taxes. Tariffs may vary.

Eligibility and Enrolment Procedure

The Bosch Training Centre
Your partner in educating your specialists
Qualified, experienced and competent personnel are essential for handling service of Bosch products.
Send your personnel for training and further education to the Bosch Training Centre. Ensure that you remain
competitive in the future. Plan now for your future requirements.
Note: Training Fee will be debited to Network directly by Bosch Limited (DD not required). For External
customers like OEMs, OECDs, STUs, Defence and Educational Institutions, Application Form to be
accompanied with DD.
Eligibility
ff Only those candidates who are employed with and sponsored by Bosch Authorised Representatives,
Original Equipment Customers and their Dealers, State Transport Undertakings, Defence Organisations,
Government Departments, ITI, Diploma College, Engineering Colleges, JOC Colleges, etc., are normally
considered eligible for training.
ff Candidates should have adequate working knowledge of the medium of instruction. The course should be
selected depending upon the proficiency of the candidate in the particular language.
Fee
ff For Courses/ Seminars at BTC: Rs. 900 per day/ person + taxes ( 12.36% )
ff For Courses/ Seminars at RTC / LTC: Rs. 500 per day/ person + taxes ( 12.36%)
How to apply?
Bosch Training Courses are offered at Bengaluru, Chennai, Ernakulam Kolkata, Pune, New Delhi, Ahmedabad,
Nagpur, Chandigarh, Guwahati, Indore, Jaipur, Lucknow, Raipur, Secunderabad and Hubli. Candidates may
apply at any Training Centre of their choice. Application should be made on the prescribed application form,
giving the required particulars to the BTC, or the respective RTCs/ LTCs of the region.
Bengaluru: Bosch Training Centre
Bosch Limited
Naganathapura Plant, Electronic City P.O.
Post Box No. 6887, Bengaluru - 560 100
Ph.: (080) 4103 5541/ 42/ 43/ 40. Fax: (080) 2852 1608/ 2852 1239
E-mail: [email protected], [email protected],
[email protected]
For RTC/ LTCs at Chennai, Ernakulam, Hubli and Secunderabad, apply to:
Chennai: Regional Trainer
Bosch Limited
Blossom Centre
Old No. 27, New No. 30, North Boag Road
T. Nagar, Chennai - 600 017
Ph.: (044) 2815 3916/ 2815 3917
Mobile: +91 91766 40990
E-mail: [email protected]
For RTC/ LTCs at Kolkata, Guwahati and Raipur apply to:
Kolkata: Regional Trainer
Bosch Limited
Post Box No. 9044
91-A, Park Street, Kolkata - 700 016
Ph.: (033) 2217 2144/ 2226 4570. Fax: (033) 2249 7482

48

48

For RTC/ LTCs at Pune, Ahmedabad, Nagpur and Indore, apply to:
Pune: Regional Trainer
Bosch Regional Training Centre,
C/o Don Bosco Vyawasaik Prashikshan Kendra,
Near St. Andrews School, Chinchwad (East),
Pune 411 019
Ph.: (020) 6410 0558
(020) 6410 0559
Mobile: +91 99875 64775
E-mail: [email protected]
For RTC/ LTCs at New Delhi, Chandigarh, Jaipur and Lucknow, apply to:
New Delhi: Regional Trainer
Bosch Limited
C/o Sunehri Exports,
Plot No. B1/E24, Mohan Co-operative Industrial Estate
Mathura Road, New Delhi - 110 044
Mobile: +91 98713 07355
E-mail: [email protected]
How to apply?
Working Hours:
RTCs/ LTCs: Monday to Friday 1000 to 1700 hr.
BTC: Monday to Friday 0900 to 1600 hr.
ff Candidates are required to make their own arrangements for lodging, boarding and transport.
Some hotels are listed in this brochure. If any assistance is required, candidates may approach the
respective Training Centres.
ff In order to maintain the quality of training (during practical demonstration classes) the number of candidates
for each course is restricted to 12.
ff Seats are reserved on a first-come-first-served basis. Candidates are to be deputed only after receipt of the
confirmation from Bosch.
ff Candidates reporting for a course without our confirmation will be accommodated only if there is a vacancy.
ff Candidates attending the course should bring a letter of introduction from the sponsoring organisation.
ff Although precautions are taken for the safety of the trainees, the company assumes no responsibility for any
injury caused to them or loss of personal articles during the training period.
ff No refund of the Seminar/ Course fee for non-participation will be made, nor will it be adjusted for another
Seminar/ Course.
ff Photography is prohibited within the factory premises.
ff Applications should reach the Training Centres at least four weeks in advance of the required
Seminar/ Course.
ff Applicants should not bring any laptops, mobiles with cameras, floppy diskettes, CDs/ DVDs, video cameras,
pen drives or memory sticks.
ff Participants shall be held responsible for the loss of any Bosch property from the Training Centres during
the Training courses.

49

Notes____________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
__________________________________________________________________________________________________________________________
50

50

51

Bosch Limited,
Bosch Training Centre,
Automotive Aftermarket,
Naganathapura Plant, Electronic City P.O.,
Post Box No. 6887, Bengaluru - 560 100.
Ph: (080) 4103 5540/ 41/ 42/ 43
Fax: (080) 2852 1608/ 2852 1239
Toll Free No. 1800 108 1081
www.boschindia.com
www.boschtraining.in