0% found this document useful (1 vote)
233 views3 pages

IPS Details 15KVA ODU Technical Specs Telenor Rev 1.4

SalTec has developed an Integrated Power System (IPS) that combines multiple power protection and management devices into a single steel cabinet. This integration significantly reduces space needs, installation time and costs, as well as maintenance compared to conventional distributed systems. The IPS provides efficient power supply and management for base transceiver station sites through its modular design and intelligent monitoring capabilities.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (1 vote)
233 views3 pages

IPS Details 15KVA ODU Technical Specs Telenor Rev 1.4

SalTec has developed an Integrated Power System (IPS) that combines multiple power protection and management devices into a single steel cabinet. This integration significantly reduces space needs, installation time and costs, as well as maintenance compared to conventional distributed systems. The IPS provides efficient power supply and management for base transceiver station sites through its modular design and intelligent monitoring capabilities.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

SalTec Integrated Power System - IPS

Integrated Power System for BTS


A conventional BTS site operates on AC mains supported by a standby
generator as well as multiple sub-units for power protection & control.
Apparently, each device does not only occupy space (floor / wall), but also need
extensive cabling In & Out to the BTS. This also leads towards lengthy
installation, too much duplication and subsequent maintenance.
SalTec has produced an innovative ' Integrated Power System ' - that
incorporates all power protection and management devices into ONE cabinet.
This integration is being done within a single standalone steel cabinet, which
ensures efficiency, cost effectiveness and a reliable support system of a BTS
site. The main advantages of power integration are as follows:

Integration Benefits over a distributed system:


1. Significant space efficiency
2. Reduced cost of equipment & BTS shelters
3. Savings in Logistics, installation material, labour & time
4. Faster installation & commissioning
5. Eliminate multi-vendor contact windows quicker roll-outs & support
6. Reduced system point-of-failures, due to elimination of duplication

Advantages of SalTec IPS


1. Extensive power management experience in the IT & Telecom segment
2. Combined Electrical / Electronics / AC & DC development experience
3. Utilization of latest & intelligent electronic components in system design
4. Innovative & Quality of design & manufacture
5. Reliable & Competent One-window developer / vendor
6. Modularity ensures quick turn around maintenance and upgrades
7. Graphical LCD metering to monitor & control each sub unit
8. Able to integrate Intelligent Remote Monitoring/Control

SalTec Powerlink
18C/3, Khayaban-e-Tanzeem, Phase-5, DHA, Karachi
Ph: (92 21) 35864852, 35863873 Fax: (92 21) 35867144
Email: [email protected], web: www.saltec-powerlink.com

SalTec Integrated Power System - IPS

Integration in Outdoor BTS


Main Power Intake with Surge
Protection (PIB)

Special Over Voltage Protection (OVI)


(Non-transient, Line Frequency)

ATS with Intelligent AMF Control

Tower Light Control & Alarm

Output Load Distribution (ACDB)

Power Measurement Module (PMM)


and GEM3

Fan Cooled Outdoor Cabinet (IP55)

Many Boxes from Many vendors

ONE Neat Cabinet One Vendor

SalTec Powerlink
18C/3, Khayaban-e-Tanzeem, Phase-5, DHA, Karachi
Ph: (92 21) 35864852, 35863873 Fax: (92 21) 35867144
Email: [email protected], web: www.saltec-powerlink.com

SalTec Integrated Power System - IPS

SP315IPS-ODU, 15KVA IPS


For Outdoor BTS

Technical Specifications:
Salient Features

Sub Assemblies

Power Intake Module &


Transient Surge & Lightning Protector
(Mounted at Rear of Main Cabinet)

4 pole MCB 60/63A rating


Surge Suppression Class C (40KA - 8/20uS)
Din rail connectors & water resistant cable entries (IPS & Utility)
3 x 1 pole 32A MCB for OVI
Industrial Plug & Socket for Mobile Genset, 5 pole 32A rating
Mobile Genset Selector switch, 3 phase 4 pole
Din rail mounted Alarm Termination (Alarm Patch Panel)

Special Over Voltage Protection


(Non-transient, Line Frequency)

UV/OV Isolator (OVI), 3 x 25A rating


Fast OV cutoff @ 275Vac (< 80ms response time on OV) & UV cutoff @ 165Vac
Accidental P-N reversal, or Neutral failure protection on all 3 phases
Microcontroller-based intelligent design
Remote alarm and LED status indication
Built-in 3 phase 4 pole Maintenance BYPASS Switch

AMF / ATS

Intelligent AMF with ATS Contactors (4pole 25A rating), for genset
Remote alarms for genset failure, mains failure & genset running
Front panel keypad, with LED & LCD display for genset parameters
Intelligent high efficiency Genset battery charger (12V)
2 x 3 phase 4 pole maintenance bypass switch for MAINS / ATS / GEN

Load Distribution

Din rail mount CBs & Terminals for 02 nos BTS & other load
2 pole Earth leakage RCCB for Service Outlet
Earth bar and Neutral bar

OB Light + Alarms

Solar Switch
DC OB Light Control & failure alarm
Microcontroller based intelligent design
PMM (Power Measurement Module)
Advance AC Power Quality Metering (4 - wire system)
Measures 3 phase parameters (Vrms, Arms, W, VA, Hz, PF, KWHr)

Advanced Instrumentation

IPS Cabinet

GEM-3: (connects to 48VDC BTS battery & Genset AMF)


Fuel cost & OpEx reducing device
Smart control of Genset based on Battery voltage and/or Temperature
Password protected front panel keyboard & user selectable alarm activation limits
Dry contact alarm outputs for easy interfacing with Telecom NOC
Adaptable to +24 or -48Vdc Telecom system or a combination
Outdoor Cabinet (IP54), with free air cooling system
Double layer powder coated paint
Dimensions (mm), 1530H x 640W x 541D

SalTec Powerlink
18C/3, Khayaban-e-Tanzeem, Phase-5, DHA, Karachi
Ph: (92 21) 35864852, 35863873 Fax: (92 21) 35867144
Email: [email protected], web: www.saltec-powerlink.com

You might also like