Scribd
Upload
251 views

Woodworking Machines Planer - Is Designed To Surface

The document describes several common woodworking machines: - A planer surfaces boards to thickness and smooths lumber, but cannot straighten warped boards. - A jointer straightens, squares, and sizes boards before projects. - A table saw is used to rip boards to width and crosscut them to length. - A radial arm saw is best for crosscutting but a table saw is better for long cuts or ripping. - A band saw can cut curves and irregular shapes as well as straight cuts in various materials. - A miter saw can cut angled surfaces and bevels at the same time. - A drill press accurately drills holes of various sizes and depths.

Uploaded by

atikahzulkipeli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
251 views

Woodworking Machines Planer - Is Designed To Surface

The document describes several common woodworking machines: - A planer surfaces boards to thickness and smooths lumber, but cannot straighten warped boards. - A jointer straightens, squares, and sizes boards before projects. - A table saw is used to rip boards to width and crosscut them to length. - A radial arm saw is best for crosscutting but a table saw is better for long cuts or ripping. - A band saw can cut curves and irregular shapes as well as straight cuts in various materials. - A miter saw can cut angled surfaces and bevels at the same time. - A drill press accurately drills holes of various sizes and depths.

Uploaded by

atikahzulkipeli
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

WOODWORKING MACHINES

Planer is designed to surface


boards to thickness and to smooth
rough-cut lumber. It will not
straighten a warped board. The
cutting head is mounted above the
table, so only the top of a board is
surfaced.
http://www.youtube.com/watch?v=Y
Cw0yw6IFl4

Jointer - is a machine used to true


up stock. That is you can straighten,
smooth, square up, and size boards.
Stock should be processed in this way
before beginning any project in order
to ensure good result
http://www.youtube.com/watch?v=5
vny6CfdQJ0

Table saw is used for ripping


boards to width and crosscutting
them to length. Most tables saw have
a fixed, horizontal table and a blade
that can be raised, lowered, and set
at an angle.
http://www.youtube.com/watch?v=9
Wl3Us3v1u4

Radial-arm saw - is ideal for


crosscutting operations. While it can
also be used for ripping, it is better to
use the table saw for that operation.
The table saw is also better suited for
long crosscuts. To cut a 4 x 8 panel
into two 4 x 4 pieces on a radial-arm
saw, you need to make a multiple
cuts. On a table saw, you can do it in
one cut.
http://www.youtube.com/watch?v=9
bnolxngnXk

Band saw even though it is used


mostly for cutting curve, circles and
irregular shapes, it can also be used
for all types of straight cutting.
Other advantages :
i)
it can cut a variety of
materials wood, plastics,
metal and panel stock
ii)
it can make long, sweeping
curves much more
accurately than any
handsaws
iii)
it has a large depth of cut
that makes it perfect for
resawing and cutting
duplicate parts.
http://www.youtube.com/watch?v=u
NCbpSg6lCU
Mitre saw can cut two angled
surfaces at the same time (a
compound angle). That is, a mitre
can be cut across the face of a board,
and at the same time a bevel can be
cut on the end.
http://www.youtube.com/watch?v=V
e2KWkHh6MQ

Drill press it is used primarily for


drilling holes of various diameter and
depths and at various angles. Holes
can be drilled accurately and with
great consistency. With proper
speeds, the drill press can also be
used for mortising and sanding.
Appropriate accessories and jigs or
setups are needed to perform these
process.

Router has a vertical shaft into


which a cutting tool called a bit is
fastened. The shafts turn very rapidly
to make cuts in wood. Different types
of cuts can be made depending on
the type of bit used. Typically the
router is used to cut dadoes, rabbets,
and grooves. However, it can also
perform joinery, mortising, planning,
and shaping processes as well.
http://www.youtube.com/watch?v=gI
t1pwigy7g

Sanders power sanders save time


and effort by reducing the amount of
hand or finish-sanding needed to
complete a project. They can be used
to follow up every type of cutting and
finishing operation. End grain, face
grain, edges, curve and irregular
shapes can be sanded using
stationary power sanders.
http://www.youtube.com/watch?v=rz
SDzK-UaA8
Lathe with a wood lathe, the work
piece is shaped by a process called
turning a cutting operation in which
the work piece is revolved against a
single-edged tool. While the lathe
does have many important industrial
uses, you will find that you can use it
to make a variety of turned parts in
the shop.
http://www.youtube.com/watch?v=J
Cwgra8Lx9A

You might also like