Finite element analysis is useful numerical technique to solve various structural problems. In this paper FEA model of slab column connection is model using ANSYS 16.0 . Punching shear failure is a major problem encountered in the design of reinforced concrete flat plates. The utilization of shear reinforcement via shear studs or other means has become a choice for improving the punching shear capacity .The obtained results indicate that, the proposed shear reinforcement system and drop panel has a positive effect in the enhancement of both the punching shear capacity and the strain energy of interior slab–column connection of both normal and high strength concrete. The general finite element software ANSYS can be used successfully to simulate the punching shearbehaviour of reinforced concrete flat plates.
Uploaded by
inventionjournalsFinite element analysis is useful numerical technique to solve various structural problems. In this paper FEA model of slab column connection is model using ANSYS 16.0 . Punching shear failure is a major problem encountered in the design of reinforced concrete flat plates. The utilization of shear reinforcement via shear studs or other means has become a choice for improving the punching shear capacity .The obtained results indicate that, the proposed shear reinforcement system and drop panel has a positive effect in the enhancement of both the punching shear capacity and the strain energy of interior slab–column connection of both normal and high strength concrete. The general finite element software ANSYS can be used successfully to simulate the punching shearbehaviour of reinforced concrete flat plates.
Uploaded by
inventionjournalsInternational Journal of Engineering Science Invention
ISSN (Online): 2319 6734, ISSN (Print): 2319 6726
www.ijesi.org ||Volume 5 Issue 4|| April 2016 || PP.49-54
Finite Element Analysis of Effect of Punching Shear in Flat Slab
Using Ansys 16.0
Yogesh A.Chaudhari1,Prof.G.B.Katti2
1
PG Student, Department of Civil Engineering,Sapkal Knlowedge Hub College of Engineering,Nashik.
Prof.G.B.Katti, Department of Civil Engineering,Sapkal Knlowedge Hub College of Engineering,Nashik.
ABSTRACT : Finite element analysis is useful numerical technique to solve various structural problems. In
this paper FEA model of slab column connection is model using ANSYS 16.0 . Punching shear failure is a major
problem encountered in the design of reinforced concrete flat plates. The utilization of shear reinforcement via
shear studs or other means has become a choice for improving the punching shear capacity .The obtained
results indicate that, the proposed shear reinforcement system and drop panel has a positive effect in the
enhancement of both the punching shear capacity and the strain energy of interior slabcolumn connection of
both normal and high strength concrete. The general finite element software ANSYS can be used successfully to
simulate the punching shearbehaviour of reinforced concrete flat plates.
KEYWORDS ANSYS, Drop Panel, Flat Slab, Punching.
I. Introduction
Punching shear is a critical design factor of reinforced concrete flat plates since it is associated with brittle
failure. Many alternative reinforcement systems had been introduced in literature; e.g., shear studs, bent bars, in
order to enhance the punching shear and the strain energy of slabcolumn connection. The punching shear
strength and deformation capacity are strongly influenced by the type and characteristics of the shear reinforcing
system. Flat slab is an ideal structural form for architects and contractors. Its flush soffit makes the formwork
construction, wiring and ducting work easy. Without using beams, flat slab provides more headroom or lower
storey height. It can thus allow for more storeys than other types of slab systems within the same building
height. But flat slab has inherent weaknesses. The connections between the floor slab and column in a flat slab
structure are generally the most critical part as far as the strength is concerned because it is a region where large
moments and shear forces are concentrated.
II. System Development
ANSYS 16 is useful to finite element simulation for RCC structure ewe use Solid 186 for concrete, link8 for
Rebar (Reinforcement), Conta 174 and Targe 173 to define contact between them.
2.1 SOLID186 Element Description
SOLID186 is a higher order 3-D 20-node solid element that exhibits quadratic displacement behaviour. The
element is defined by 20 nodes having three degrees of freedom per node: translations in the nodal x, y, and z
directions. The element supports plasticity, hyper elasticity, creep, stress stiffening, large deflection, and large
strain capabilities. It also has mixed formulation capability for simulating deformations of nearly incompressible
elastoplastic materials, and fully incompressible hyper elastic materials.
2.2 CONTA 174 and TARGE170
The 3-D contact surface elements (CONTA173 and CONTA174) are associated with the 3-D target segment
elements (TARGE170) via a shared real constant set. ANSYS looks for contact only between surfaces with the
same real constant set. For either rigid-flexible or flexible-flexible contact, one of the deformable surfaces must
be represented by a contact surface.
www.ijesi.org
49 | Page
Finite Element Analysis of Effect of Punching
Fig. 1
Fig 2
If more than one target surface will make contact with the same boundary of solid elements, you must define
several contact elements that share the same geometry but relate to separate targets (targets which have different
real constant numbers), or you must combine two target surfaces into one (targets that share the same real
constant numbers).
Fig 3
www.ijesi.org
50 | Page
Finite Element Analysis of Effect of Punching
2.3 Finite Element meshing in ANSYS
Fig4
III. Problem Statement
The Finite Element Model consisted of square flat plates 1200 mm length and 140 mm thick with 160 mm
square reinforced concrete column stubs extending 160 mm above the plate. All the slabs were identical in
dimensions. The reinforcement was distributed uniformly throughout the width of the slab as shown in model.
Fig 5
Fig 6
www.ijesi.org
51 | Page
Finite Element Analysis of Effect of Punching
IV. Performance Analysis:
Results of the Finite Element analysis were validated with experimental test results(5).
Graph 1
The percentage error is found to be 20%. for non-linear results. For statics linear analysis analytical and
experimental results are nearly same. First crack in specimen is found at 150kN.The normal stress, shear stress,
shear strain, total deformation, and strain energy results for 150kN are shown in fig9,fig10.
Graph 2
Fig 7
www.ijesi.org
52 | Page
Finite Element Analysis of Effect of Punching
Fig. 8
Fig 9
Fig 10
V. Result and Discussion:
In this paper finite element modelling of Flat slab with and without drop panel is conducted. First stage of this project
include validation of model with experimental result (5).later on in second stage a drop panel is inserted at critical
depth d/2. It is observed that the deformation of slab is considerably reduced. For future work scope research work can
be done in shape such as circular, hexagonal, pentagon with various depths. The above study indicates the validation of
IS 456:2000.
www.ijesi.org
53 | Page
Finite Element Analysis of Effect of Punching
References:
[1]
[2]
[3]
[4]
[5]
[6]
Ahmed Ibrahim, Salah E.E. El-Metwally, Hamed H. Asker,Mohamed A. El Zareef (2015).Effect of mid-thickness rebar mesh on
the behavior and punching shear strength of interior slabcolumn connection.HBRC Journal (2015).
ANSYS. ANSYS Users Manual Revision 16, ANSYS.
IS 1893-Part 1. Indian Standard Criteria for Earthquake Resistant Design of Structures, Bureau of Indian Standards, New Delhi,
India, 2002.
IS 456. Indian Standard Plain and Reinforced Concrete Code of Practice, Bureau of Indian Standards, New Delhi, India, 2000.
M. Priya, S. Greeshma and K. N. Suganya (2015), Finite Element Analysis of Slab - Column Joint Under Lateral Loading .Asian
Journal of Civil Engineering (BHRC) vol. 16, no. 2 (2015)
S.R. Hoseini Vaez, A. Kheyroddin, and H. Naderpour(2008),3D Finite Element Simulation of Slab-Column Connections
Strengthened with CFRP.Fourth International Conference on FRP Composites in Civil Engineering (CICE2008).
www.ijesi.org
54 | Page
