Scribd
Upload
15 views

B Tech Training - Guidelines

This document provides guidelines for formatting a B.Tech training report, including: - Using Times New Roman font size 12, with 1.5 line spacing and 9 point spacing between paragraphs. - Having 1.25 inch left, 0.75 inch right, 1 inch top and bottom margins. - Numbering chapters and including the chapter number in the top right corner. - Centering and making the title of each chapter size 14. - Numbering tables and figures based on the chapter and including titles for each. - Including sections like the certificate, declaration, acknowledgement, contents, abstract, introduction, conclusions and references following IEEE standards.

Uploaded by

Himanshu Mishra
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
15 views

B Tech Training - Guidelines

This document provides guidelines for formatting a B.Tech training report, including: - Using Times New Roman font size 12, with 1.5 line spacing and 9 point spacing between paragraphs. - Having 1.25 inch left, 0.75 inch right, 1 inch top and bottom margins. - Numbering chapters and including the chapter number in the top right corner. - Centering and making the title of each chapter size 14. - Numbering tables and figures based on the chapter and including titles for each. - Including sections like the certificate, declaration, acknowledgement, contents, abstract, introduction, conclusions and references following IEEE standards.

Uploaded by

Himanshu Mishra
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

GUIDELINES FOR B.

TECH TRAINING REPORT


1)
2)
3)
4)
5)

The main contents in the Project Report should be typed in Times New Roman.
Font size should be 12.
Spacing between consecutive lines should be 1.5.
Separate successive paragraphs by 9 points.
Margins of each page should be preferably 1.25 inch left side, 0.75 inch right hand
side, one inch top and 1.5 inch bottom with page no. at bottom margin of one inch.
6) For each chapter at top right corner chapter no. should be written: for example; for
chapter 1, it should be Chapter - 1 (Font 12, Times New Roman).
7) Title of the chapter should be typed in Font 14 (All Capital) and should be centered.
8) Reference no. will be put in square brackets within the text in the order in which they are
cited.
9) Page no. should be numbered from Abstract as 1, 2, 3
10) Preferably, the Report should be organized as under:
i) Certificate
ii) Candidates Declaration
iii) Acknowledgement
iv) Contents ().
Abstract (From 1 onwards)
Introduction (Chapter - 1, Essential, Detailing Scope of work with Objectives)
Tables should be given the number based on their chapters; for example; for chapter
2 they should be Table 2.1, 2.2 and so on. They should be written as per IEEE Syntax as
under:
TABLE 1.1
NO. OF LINES, RELAYS, VARIABLES AND CONSTRAINTS
FOR SOME POWER SYSTEMS
Like Tables, Figures should be numbered, and should be titled as under
Fig. 2.2. Diagram showing near-end and far-end faults for relay R
Pri_Near
Conclusions (Future Scope should be mentioned at the end of this chapter)
References (IEEE Syntax), Examples are given as under:
To refer a research paper - Dinesh Birla, R. P. Maheshwari, and H. O. Gupta, A New
Non-linear Directional Overcurrent Relay Coordination Technique, and Banes and Boons of Near-end
Faults Based Approach, IEEE Transactions on Power Delivery, vol.-21, no.-3, pp. 1176-1182, July
2006
To refer a book - David E, Goldberg, Genetic Algorithms in Search, Optimization, and Machine
Learning, ISBN 81-7808-130-X, Pearson Education Asia Pte Ltd., 2000. (621.381952, G47G)
xi) Appendix
11) Page no. should be numbered in Roman as i, ii, iii distinct to that of starting from content
13) Title of training, name of the student and guide, year of submission must be printed embossed
on the cover page of the training report.
14) Soft copy of the formats for the serial no. 10 point from (i) to (iv) will be provided by the
training incharge.
15) All the diagrams in the report should be made by students themselves and not to be copied
from internet or any other sources.

Acknowledgement
We wish to express our deep sense of gratitude to our training Guide Name
designation

with

.. Sobhasaria Engineering College, Sikar for guiding from the

inception till the completion of the training. I sincerely acknowledge for giving his/her
valuable guidance, critical reviews and comments for giving the final shape of the
Project.
Words are inadequate in offering our thanks to Sh. H.N. Purohit (Member Secretary),
Dr. Chetan khemraj (Principal), Sh. H. K. Mishra (H.O.D., EE) and Mr. Gaurav
Gangil (Training Coordinator) of Sobhasaria Group of Institutions, Sikar for
consistent encouragement and support for shaping my training in the presentable form.
Finally, we would like to express our heartfelt thanks to all supporting staff members
and friends who have been a constant source of encouragement for successful
completion of the training..

Name of Candidate
University Roll no:(Times roman 12).

You might also like