Scribd
Upload
223 views

SMF Aisc 341-10

This document summarizes the structural analysis of two steel beams and one column. It provides the geometric properties, material properties, and loading conditions. The analysis found that the beams meet lateral-torsional buckling requirements and have sufficient strength. While the section is not compact for seismic resistance, it is compact for other stability checks. The maximum moment and shear were determined to be less than the beams' nominal capacities.

Uploaded by

mrnicus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
223 views

SMF Aisc 341-10

This document summarizes the structural analysis of two steel beams and one column. It provides the geometric properties, material properties, and loading conditions. The analysis found that the beams meet lateral-torsional buckling requirements and have sufficient strength. While the section is not compact for seismic resistance, it is compact for other stability checks. The maximum moment and shear were determined to be less than the beams' nominal capacities.

Uploaded by

mrnicus
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 30

E3.

Special Moment Frames (SMF)


4a. Moment Ratio
###
Fyb = 2531 [kg/cm]
Fyc = 3515 [kg/cm]
Ry = 1.50
Rt = 1.20
Viga 1
b = 250 [mm]
tf = 12 [mm]
h = 550 [mm]
tw = 8 [mm]
No es Compacta Sismi

Viga 2
b = 250 [mm]
tf = 12 [mm]
h = 550 [mm]
tw = 8 [mm]
No es Compacta Sismi

Columna
b = 350 [mm]
tb = 15 [mm]
h = 400 [mm]
th = 8 [mm]

Ag = 10400 [mm]
a = 440.58 [mm]
Z = 2291000 [mm]

Ag = 10400 [mm]
a = 440.58 [mm]
Z = 2291000 [mm]

Ag = 13700 [mm]
a = 364.78 [mm]
Z = 2498750 [mm]

Muv = 10.67 [tfm]

Muv = 10.67 [tfm]

Tipo = 1
Puc = 0.00 [tf]

Mpb = 106.34 [tfm]

Mpb = 106.34 [tfm]


Mpc = 87.83 [tfm]

Mpc/MpB = 0.41

> 1.00

AISC 358-10 - WUF-W

olumna
= 350 [mm]
= 15 [mm]
= 400 [mm]
= 8 [mm]

g = 13700 [mm]
= 364.78 [mm]
= 2498750 [mm]

po = 1
uc = 0.00 [tf]

Mpc = 87.83 [tfm]

_=_ _

Cpr =
Mpr = 121.76
Mpr = 121.76

L = 15.00 L = 15.00 S = 5.00 - [m] (Vig


S = 5.00 - [m] (Vig

W(D) = 650.
W(L) = 420.

W(u) = 4.95 [t
W(u) = 4.95 [t

Vig
Rotula 1
Rotula 2
Diseo
Resistencia

Vig
Rotula 1
Rotula 2
Diseo
Resistencia

0 - WUF-W

_=_ _ _ _
Cpr = 1.40
Mpr = 121.76 - [tfm] (Viga 1)
Mpr = 121.76 - [tfm] (Viga 2)
L = 15.00 - [m] (Viga 1)
L = 15.00 - [m] (Viga 2)
S = 5.00 - [m] (Viga 1 - ancho coop)
S = 5.00 - [m] (Viga 2 - ancho coop)
W(D) = 650.00 - [kg/m]
W(L) = 420.00 - [kg/m]
W(u) = 4.95 [tf/m] - (Viga 1)
W(u) = 4.95 [tf/m] - (Viga 2)

Viga 1
Vh = 53.36 [tf]
Vh = 20.89 [tf]
Vu = 53.36 [tf]
Vn = 62.76 [tf]

OK

Viga 2
Vh = 53.36 [tf]
Vh = 20.89 [tf]
Vu = 53.36 [tf]
Vn = 62.76 [tf]

OK

E3. Special Moment Frames (SMF)


4a. Moment Ratio
###
Fyb = 2531 [kg/cm]
Fyc = 3515 [kg/cm]
Ry = 1.50
Rt = 1.20
Viga 1
b = 250 [mm]
tf = 12 [mm]
h = 550 [mm]
tw = 8 [mm]
No es Compacta Sismi

Viga 2
b = 250 [mm]
tf = 12 [mm]
h = 550 [mm]
tw = 8 [mm]
No es Compacta Sismi

Columna
b = 350 [mm]
tb = 15 [mm]
h = 400 [mm]
th = 8 [mm]

Ag = 10400 [mm]
a = 440.58 [mm]
Z = 2291000 [mm]

Ag = 10400 [mm]
a = 440.58 [mm]
Z = 2291000 [mm]

Ag = 16420 [mm]
a = 318.41 [mm]
Z = 2614150 [mm]

Muv = 10.67 [tfm]

Muv = 10.67 [tfm]

Tipo = 1
Puc = 0.00 [tf]

Mpb = 106.34 [tfm]

Mpb = 106.34 [tfm]


Mpc = 91.89 [tfm]

Mpc/MpB = 0.43

> 1.00

AISC 358-10 - WUF-W

olumna
= 350 [mm]
= 15 [mm]
= 400 [mm]
= 8 [mm]

g = 16420 [mm]
= 318.41 [mm]
= 2614150 [mm]

po = 1
uc = 0.00 [tf]

Mpc = 91.89 [tfm]

_=_ _

Cpr =
Mpr = 121.76
Mpr = 121.76

L = 15.00 L = 15.00 S = 5.00 - [m] (Vig


S = 5.00 - [m] (Vig

W(D) = 650.
W(L) = 420.

W(u) = 4.95 [t
W(u) = 4.95 [t

Vig
Rotula 1
Rotula 2
Diseo
Resistencia

Vig
Rotula 1
Rotula 2
Diseo
Resistencia

0 - WUF-W

_=_ _ _ _
Cpr = 1.40
Mpr = 121.76 - [tfm] (Viga 1)
Mpr = 121.76 - [tfm] (Viga 2)
L = 15.00 - [m] (Viga 1)
L = 15.00 - [m] (Viga 2)
S = 5.00 - [m] (Viga 1 - ancho coop)
S = 5.00 - [m] (Viga 2 - ancho coop)
W(D) = 650.00 - [kg/m]
W(L) = 420.00 - [kg/m]
W(u) = 4.95 [tf/m] - (Viga 1)
W(u) = 4.95 [tf/m] - (Viga 2)

Viga 1
Vh = 53.36 [tf]
Vh = 20.89 [tf]
Vu = 53.36 [tf]
Vn = 62.76 [tf]

OK

Viga 2
Vh = 53.36 [tf]
Vh = 20.89 [tf]
Vu = 53.36 [tf]
Vn = 62.76 [tf]

OK

Propiedades Geometricas de La Seccion


250 [mm]

550 [mm]

574 [mm]

12 [mm]

yc
m

8 [mm]

Soporte Lateral
Lb (Ala Superior) = 1.50 [m]
Lb (Ala Inferior) = 1.50 [m]
Materiales
Modulo de Elasticidad E = 2038902 [kg/cm]
Fy = 2531 [kg/cm]
Factores de Reduccion de Capacidad
b = 0.90
v = 0.90
Datos
Cb = 1.00
Kb = 5.00
Geometria
W250x12x550x8
bf = 250 [mm]
tf = 12 [mm]
hw = 550 [mm]
tw = 8 [mm]
Propiedades
Ag = 104.00 [cm]
ycm = 22.03 [cm]
Zx = 2291.00 [cm]
Ix = 584754667 [mm4]
cx = 287.00 [mm]
Sx = 2037473 [mm]
My = 51.56 [tm]
Mp = 57.98 [tm]
rx = 237.12 [mm]
Iy = 31273467 [mm4]
cy = 125.00 [mm]
Sy = 250188 [mm]
ry = 54.84 [mm]

cw = 2467531250000.00 [mm6]
rts = 65.66 [mm]
ho = 562.00 [mm]
Jc = 383914.67 [mm4]
Wl = 81.64 [kg/m] Peso Lineal
Estabilidad Local (Compacidad)
bf/(2tf) = 10.42 ALA
bf/(2tf) < 8.52 LIMITE DEL ALA SISMICO
bf/(2tf) < 10.79 LIMITE DEL ALA COMPACTO
bf/(2tf) < 28.38 LIMITE DEL ALA NO COMPACTO
hw/(tw) = 68.75 ALMA
hw/(tw) < 69.54 LIMITE DEL ALMA SISMICO
hw/(tw) < 107.29 LIMITE DEL ALMA COMPACTO
hw/(tw) < 161.79 LIMITE DEL ALMA NO COMPACTO
Seccion Compacta
Seccion Compacta
No es Compacta Sismicamente
Estabilidad Lateral (LTB) - Ala Superior
Lb = 1.50 [m]
Lb < 3.80 [m] Requisito Sismico
Lp = 2.74 [m]
Lr = 7.54 [m]
Resistencia a la flexion Nominal M(-) LTB
Lb < Lp
Mn = 57.98 [tm]
Lp < Lb < Lr
Mn = 57.98 [tm]
Lb > Lr
Fcr = 38823 [kg/cm]
Mn = 57.98 [tm]
Mn = 52.18 [tm]
Estabilidad Lateral (LTB) - Inferior
Lb = 1.50 [m]
Lb < 3.80 [m] Requisito Sismico
Lp = 2.74 [m]
Lr = 7.54 [m]
Resistencia a la flexion Nominal M(+) LTB
Lb < Lp
Mn = 57.98 [tm]
Lp < Lb < Lr
Mn = 57.98 [tm]
Lb > Lr
Fcr = 38823 [kg/cm]
Mn = 57.98 [tm]
Mn = 52.18 [tm]
Resistencia a la flexion Nominal Secciones No Compactas
Mn = 10000000000000.00 [tm]
Mn = 9000000000000.00 [tm]
Resistencia al Corte Nominal Vn
Aw = 4592 [mm]
hw/(tw) = 68.75 ALMA
hw/(tw) < 69.81 LIMITE DEL ALMA SIN INESTABILIDAD

hw/(tw) < 86.95 LIMITE DE PANDEO ELASTICO EN EL ALMA


No hay inestabilidad en el alma por corte
Cv = 1.00
Vn = 70 [t]

Resumen
Estabilidad Local de la Seccion
No es Compacta Sismicamente
Seccion Compacta
Ala es Seccion Compacta / Alma es Seccion Compacta
Estabilidad Lateral Torsional Ala Superior y Resistencia
Cumple requisito simico de LTB
Lb < Lp No hay inestabilidad
Lp = 2.74 [m]

Cargas Mayordas
X

Mu(-) = -0.00
Mu(+) = 0.27
Vu(+) = 30.00
-Vu(-) = 30.00

OK

Vigas Secundaria

Lp = 7.54 [m]

L (viga) = 5.25 [m

Mn = 52.18 [tm] M(-)


Estabilidad Lateral Torsional Ala Inferior y Resistencia
Cumple requisito simico de LTB
Lb < 3.80 [m] Requisito Sismico
Lp = 2.74 [m]
Lp = 7.54 [m]
Lb < Lp No hay inestabilidad
Mn = 52.18 [tm] M(+)
Resistencia al Corte
No hay inestabilidad en el alma por corte (corte)
h/tw < 260
Vn = 62.76 [t]
Peso de la seccion
Wl = 81.64 [kg/m] Peso Lineal

s = 1.21 [m]
Limite (L) = 360
Limite (L+D) = 240
wL = 0.20 [t/m]
wD = 0.20 [t/m]
L = 0.02 [cm]
(D+L) = 0.04 [cm]
Limite (L) = 1.46 [cm
Limite (L+D) = 2.19 [c
OK
OK
M(Max) = 2.40 [tm

OK

OK

Cargas Mayordas
(Robot/Etabs/Manual)

Mu(-) = -0.00
Mu(+) = 0.00
Vu(+) = 30.00
-Vu(-) = -30.00

0.00
0.00
0.48
0.48

* NOTAS: El valor de Cb entra en consideracion cuando existe


algun tipo de inestabilidad por LTB, se lo puede considerar igual
a 1 de manera conservadora
* El programa no calcula la resistencia nominal cuando existe
problemas de esbeltez en la seccion
*Kb es usado para deteminar la resistencia al corte, y es igual a
5 para almas sin atiezadores
*El programa no funciona cuando el alma es no compacta

Cargas Mayordas
Mu(-) = -0.00
Mu(+) = 0.27
Vu(+) = 30.00
-Vu(-) = 30.00

Vigas Secundarias
L (viga) = 5.25 [m]

s = 1.21 [m]
Limite (L) = 360
Limite (L+D) = 240
wL = 0.20 [t/m]
wD = 0.20 [t/m]
L = 0.02 [cm]
(D+L) = 0.04 [cm]
Limite (L) = 1.46 [cm]
Limite (L+D) = 2.19 [cm]
OK
OK
M(Max) = 2.40 [tm]

Propiedades Geometricas de La Seccion


250 [mm]

550 [mm]

574 [mm]

12 [mm]

yc
m

8 [mm]

Soporte Lateral
Lb (Ala Superior) = 1.50 [m]
Lb (Ala Inferior) = 1.50 [m]
Materiales
Modulo de Elasticidad E = 2038902 [kg/cm]
Fy = 2531 [kg/cm]
Factores de Reduccion de Capacidad
b = 0.90
v = 0.90
Datos
Cb = 1.00
Kb = 5.00
Geometria
W250x12x550x8
bf = 250 [mm]
tf = 12 [mm]
hw = 550 [mm]
tw = 8 [mm]
Propiedades
Ag = 104.00 [cm]
ycm = 22.03 [cm]
Zx = 2291.00 [cm]
Ix = 584754667 [mm4]
cx = 287.00 [mm]
Sx = 2037473 [mm]
My = 51.56 [tm]
Mp = 57.98 [tm]
rx = 237.12 [mm]
Iy = 31273467 [mm4]
cy = 125.00 [mm]
Sy = 250188 [mm]
ry = 54.84 [mm]

cw = 2467531250000.00 [mm6]
rts = 65.66 [mm]
ho = 562.00 [mm]
Jc = 383914.67 [mm4]
Wl = 81.64 [kg/m] Peso Lineal
Estabilidad Local (Compacidad)
bf/(2tf) = 10.42 ALA
bf/(2tf) < 8.52 LIMITE DEL ALA SISMICO
bf/(2tf) < 10.79 LIMITE DEL ALA COMPACTO
bf/(2tf) < 28.38 LIMITE DEL ALA NO COMPACTO
hw/(tw) = 68.75 ALMA
hw/(tw) < 69.54 LIMITE DEL ALMA SISMICO
hw/(tw) < 107.29 LIMITE DEL ALMA COMPACTO
hw/(tw) < 161.79 LIMITE DEL ALMA NO COMPACTO
Seccion Compacta
Seccion Compacta
No es Compacta Sismicamente
Estabilidad Lateral (LTB) - Ala Superior
Lb = 1.50 [m]
Lb < 3.80 [m] Requisito Sismico
Lp = 2.74 [m]
Lr = 7.54 [m]
Resistencia a la flexion Nominal M(-) LTB
Lb < Lp
Mn = 57.98 [tm]
Lp < Lb < Lr
Mn = 57.98 [tm]
Lb > Lr
Fcr = 38823 [kg/cm]
Mn = 57.98 [tm]
Mn = 52.18 [tm]
Estabilidad Lateral (LTB) - Inferior
Lb = 1.50 [m]
Lb < 3.80 [m] Requisito Sismico
Lp = 2.74 [m]
Lr = 7.54 [m]
Resistencia a la flexion Nominal M(+) LTB
Lb < Lp
Mn = 57.98 [tm]
Lp < Lb < Lr
Mn = 57.98 [tm]
Lb > Lr
Fcr = 38823 [kg/cm]
Mn = 57.98 [tm]
Mn = 52.18 [tm]
Resistencia a la flexion Nominal Secciones No Compactas
Mn = 10000000000000.00 [tm]
Mn = 9000000000000.00 [tm]
Resistencia al Corte Nominal Vn
Aw = 4592 [mm]
hw/(tw) = 68.75 ALMA
hw/(tw) < 69.81 LIMITE DEL ALMA SIN INESTABILIDAD

hw/(tw) < 86.95 LIMITE DE PANDEO ELASTICO EN EL ALMA


No hay inestabilidad en el alma por corte
Cv = 1.00
Vn = 70 [t]

Resumen
Estabilidad Local de la Seccion
No es Compacta Sismicamente
Seccion Compacta
Ala es Seccion Compacta / Alma es Seccion Compacta
Estabilidad Lateral Torsional Ala Superior y Resistencia
Cumple requisito simico de LTB
Lb < Lp No hay inestabilidad
Lp = 2.74 [m]

Cargas Mayordas
X

Mu(-) = -0.00
Mu(+) = 0.27
Vu(+) = 30.00
-Vu(-) = 30.00

OK

Vigas Secundaria

Lp = 7.54 [m]

L (viga) = 5.25 [m

Mn = 52.18 [tm] M(-)


Estabilidad Lateral Torsional Ala Inferior y Resistencia
Cumple requisito simico de LTB
Lb < 3.80 [m] Requisito Sismico
Lp = 2.74 [m]
Lp = 7.54 [m]
Lb < Lp No hay inestabilidad
Mn = 52.18 [tm] M(+)
Resistencia al Corte
No hay inestabilidad en el alma por corte (corte)
h/tw < 260
Vn = 62.76 [t]
Peso de la seccion
Wl = 81.64 [kg/m] Peso Lineal

s = 1.21 [m]
Limite (L) = 360
Limite (L+D) = 240
wL = 0.20 [t/m]
wD = 0.20 [t/m]
L = 0.02 [cm]
(D+L) = 0.04 [cm]
Limite (L) = 1.46 [cm
Limite (L+D) = 2.19 [c
OK
OK
M(Max) = 2.40 [tm

OK

OK

Cargas Mayordas
(Robot/Etabs/Manual)

Mu(-) = -0.00
Mu(+) = 0.00
Vu(+) = 30.00
-Vu(-) = -30.00

0.00
0.00
0.48
0.48

* NOTAS: El valor de Cb entra en consideracion cuando existe


algun tipo de inestabilidad por LTB, se lo puede considerar igual
a 1 de manera conservadora
* El programa no calcula la resistencia nominal cuando existe
problemas de esbeltez en la seccion
*Kb es usado para deteminar la resistencia al corte, y es igual a
5 para almas sin atiezadores
*El programa no funciona cuando el alma es no compacta

Cargas Mayordas
Mu(-) = -0.00
Mu(+) = 0.27
Vu(+) = 30.00
-Vu(-) = 30.00

Vigas Secundarias
L (viga) = 5.25 [m]

s = 1.21 [m]
Limite (L) = 360
Limite (L+D) = 240
wL = 0.20 [t/m]
wD = 0.20 [t/m]
L = 0.02 [cm]
(D+L) = 0.04 [cm]
Limite (L) = 1.46 [cm]
Limite (L+D) = 2.19 [cm]
OK
OK
M(Max) = 2.40 [tm]

You might also like