Quick Reference Guide

Model No.

KX-T7710

Important Information
When using the KX-T7710, keep the following conditions in mind.
If there is any problem, unplug the extension line and connect a known working phone.
If the known working phone operates properly, have the defective phone repaired by
your dealer. If the known working phone does not operate properly, check the
Panasonic KX series Business Telephone System and the internal extension wiring.
Keep the unit away from heating appliances and electrical noise generating devices
such as fluorescent lamps and motors.
The unit should be kept free of dust, moisture and vibration, and should not be exposed
to direct sunlight.
Do not use thinner, or any abrasive powder to clean the cabinet. Wipe it with a soft
cloth.
Do not disassemble this product. Dangerous electrical shock could result. The unit
must only be disassembled and repaired by qualified service technicians.
Do not use any handset other than a Panasonic handset.
This apparatus is designed to be operated under controlled conditions of temperature
and humidity.
Avoid installing the apparatus in damp or humid environments, such as in bathrooms or
near swimming pools.
999 and 112 can be dialled on the apparatus after accessing the exchange line for the
purpose of making outgoing calls to the BT emergency (999) and (112) services.
WARNING:
TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR ANY TYPE OF MOISTURE.
THIS HANDSET EARPIECE IS MAGNETISED AND MAY RETAIN SMALL FERROUS OBJECTS.

IMPORTANT NOTICE:
This product is designed for use in the U.K.
Note:
In this manual, the suffix of each model number is omitted.

2003 Panasonic Communications Co., Ltd. All Rights Reserved.

Features List
Off-hook

On-hook

Talk

Feature number

* The Feature numbers described in this manual are for KX-TE Series or KX-TDA Series.
If a different Panasonic KX series Business Telephone System is connected, please
refer to its manuals.
* "Location of Controls" is shown on page 6.
Operation

Desired Function

Making Calls
To an extension

Calling

To an external party
line access
no.

extension no.

Redial

phone no.

The REDIAL will dial the last number you called manually.

Quick Dialling

quick dial no.

To store

One-touch
Dialling

desired no.

(max. 24 digits)

Press One-touch button.

To dial

/
Press One-touch button.

Calling an
operator
To store
KX-TE Series
KX-TDA Series

Personal
Speed Dialling

Personal speed
dial no.
TE: 0-9
TDA: 00-99 (Default: 00-09)

desired no.
(TE: max. 24 digits)
(TDA: max. 32 digits)

To dial
KX-TE Series
KX-TDA Series

Personal speed
dial no.
TE: 0-9
TDA: 00-99 (Default: 00-09)

To dial

System
Speed Dialling

KX-TE Series
KX-TDA Series

System speed
dial no.
TE: 00-99
TDA: 000-999

Features List
Operation

Desired Function

When the Dialled Extension is Busy/No Answer

To leave/cancel a notification
KX-TE Series
Leave
extension no.
Cancel

Sender
Message
Waiting

KX-TDA Series
Leave
extension no.
Cancel
To call back

* In Normal Mode, you should change

the default setting for Message button.
(See page 5.)

Receiver

During a Conversation
Holding

To retrieve a call at the holding extension

KX-TE Series

KX-TE Series

If the handset has been replaced, just go off-hook.

Holding a call
KX-TDA Series

Transferring
a call

KX-TDA Series

dial no.
Announce.

Features List
Operation

Desired Function

Useful Features
To page
KX-TE Series
All extensions

Group
group no.
All external speakers

Announce.

All extensions & external speakers

Paging
KX-TDA Series
paging group no.
Announce.
You can make a voice announcement to extensions or external speakers or both
in the preset group simultaneously.
To answer a page
KX-TE Series
KX-TDA Series

During a conversation

Three-party
Conference

desired phone no.

KX-TE Series
lock code

lock code

lock code

Lock
Unlock

Locking your
extension
KX-TDA Series
Lock
extension PIN

Unlock

Operations in NORMAL Mode

One-touch buttons
Five One-touch buttons can be used as speed dialling buttons or to access features.

Personal Speed Dialling

You can store Personal speed dial numbers up to 10 for KX-TE Series,
and up to 100 for KX-TDA Series(Default: 10).

MESSAGE Button
You can change the feature access number for the MESSAGE Button. [Default: 702]
For more detail, refer to the manual for the connected Panasonic KX series Business
Telephone Systems.
desired no.
(max. 24 digits)

Setting Lock/Unlock
You can lock the settings for one-touch buttons and MESSAGE button. [Default: Unlock]
To lock
To unlock

Confirmation in Programming Mode

When programming, you can confirm your entry by three types of beep sound.
One long beep: Your entry is accepted.
Two beeps: Your entry is same as a previous entry.
Three beeps: Your entry is rejected.

Memory Back Up
If the telephone line is disconnected for more than three days, the stored numbers
for One-touch dialling and Speed dialling will be erased. Please store them again.
Also, the settings for MESSAGE and Flash time will return to the default settings.

Flash Time
Before programming the length of Flash time, make sure the position of the Mode
switch lever is "NORMAL". Enter the appropriate selection number for your country.
[Default: 100 ms]
selection no.
1: 80 ms, 2: 90 ms, 3: 100 ms,
4: 110 ms

Regarding other operations, please refer to the manuals

for the Panasonic KX series Business Telephone Systems
to which you are connected.
5

Location of Controls
The KX-T7710 has two modes, NORMAL Mode and Panasonic PBX Mode*.
Please use the corresponding side of the Telephone Card depending on the mode.
*The PBX Mode may not be available depending on the model of the Panasonic KX series Business
Telephone Systems to which you are connected.
For more detail, please consult your dealer.

NORMAL Mode

PBX Mode

Message/Ringer Lamp: Flashes when you receive a call or when

someone has left you a message.
One-touch Buttons (M1-M5): Used to
access a feature or as a speed dialling
button.

One-touch Buttons
(1-8): Used as preset
feature buttons set at
the Panasonic KX series
PAUSE: Used to insert a pause when
Business Telephone
storing a telephone number.
Systems; you do not
AUTO: Used for Personal Speed dialling. need to program at your
extension.
PROGRAM: Used to enter the
programming mode.
MESSAGE: Used to call back the party who left the message
waiting indication.
NORMAL mode

Handset Volume Control Buttons: Used to adjust the handset volume.

PBX mode

FLASH/RECALL: Used to send a recall signal in order to access a

PBX feature (e.g., Hold, Transfer, or Three-party Conference).
4

REDIAL: Used to redial the last dialled number.

Telephone Card: Has two sides (NORMAL mode, PBX mode).

Confirming the Mode

You can confirm the current mode by the position of the Mode switch
lever (at the bottom of the unit). [Default: NORMAL]

Adjusting the RINGER Volume

Adjust the RINGER volume selector lever (at the bottom of the unit) to
the desired setting. ( LOW, MIDDLE,
HIGH)
[Default: MIDDLE]

Connecting a Communication Device

To connect a communication device such as a computer modem
to the telephone line, please use the DATA PORT (at the right
side of the unit). RJ11 modular jack is available.

DATA PORT

Things You Should Know

Wall Mounting

Wall
mounting
adaptor

Telephone
line cord

83 mm

To temporarily
place the handset
down during a
conversation:

Removing the Telephone Card Cover

This product is intended to be connected to Panasonic KX series Business Telephone

Systems only.
We, Panasonic Communications Co., Ltd., declare that this equipment is in compliance with
the essential requirements and other relevant provisions of Directive 1999/5/EC.
If you want to get a copy of the original Declaration of Conformity of our products which
relates to the R&TTE, please use our web site: http://doc.panasonic.de

PSQW2002YA-BM KK0103DH1026 (E)