Wireless Bomb Defusing Robot With Camera Interfacing
Uploaded by
ijsretWireless Bomb Defusing Robot With Camera Interfacing
Uploaded by
ijsretInternational Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882
Volume 5, Issue 4, April 2016
Wireless Bomb Defusing Robot with camera interfacing
Prof. Vaibhav joshi, Sonali Katore, Yogini Bhandare, Amol Kanade.
#
Department of Electronics and Telecommunication
SITRC, Nasik, SPPU
ABSTACT
In the past decade, robotic systems have been used with
increased popularity for explosive ordnance (EOD)
missions. Advances in robotic technology have made it
possible for robots to per-form functions previously only
possible by human workers wearing a blast suit as shown.
The primary advantage to using robotic systems for
explosive ordinance disposal is the reduced risk to humans.
Currently, EOD robots are able to traverse a variety of
terrain, collect and destroy certain explosives and provide
improved reconnaissance capabilities to law enforcement
and military agencies. Although far from perfected, these
robots are saving lives by finding and disposing of
explosives without the need for direct human contact
reliable robotic platform. The key features of the robot
include an intuitive user interface which provides
additional sensor feedback and enhanced visual awareness
compared to existing systems, an on board three degree of
freedom manipulator arm providing an enlarged
workspace, and a dexterous gripper allowing for the
removal of detonators. The flexible and modular robot
design utilizes commercial off the shelf components for
ease of maintenance and repairs. The robot provides a safe
distance threat assessment and increased capacity for
explosive ordinance disposal, improving the effectiveness
of bomb disposal teams. The robots low-cost, intuitive
operation and ease-of-maintenance promote its widespread
appeal, thereby saving the lives of both law enforcement
personnel and civilians.
I.
INTRODUCTION
Here we are going to construct a Robot which is used for
bomb disposal purpose. Use wireless camera for video
feedback so operator can operate more efficiently. The
operation of robot is control by using wireless module so it
can provide more range of operation. Also construct a basic
bomb diffusing robot which can handle simple tasks like
cutting wires, flip on switches, lift light objects, etc. and a
simple autonomous robot to help in the transit of the bomb.
Also gives video feedback to us so effective handling of
robot can be possible. This paper details the design and
implementation of an intelligent explosive ordinance
disposal (EOD) robot to provide law enforcement agencies
with a cost effective and Due to this more security will
provide to bomb disposal squad. Also it more applicable
for police, nuclear radioactive material handling, also for
military purpose. We are going to interface of camera so
for future purpose that images capture by camera of bomb
will be more useful. Here we use robotic arm which have 5
degree of freedom so operation of robot handling will be
more softly. We are going to use stepper and Dc motors as
actuator, Robot base will rotate 360 degree, elbow,
shoulder and gripper also will move according to their
directions the input to the system is from the user. This
input is first processed at the control application, serially
transmitted over a Radio Link. This input is then received
at the robot and processed again. The output of the system
is the processed signal to the appropriate module. This
module can be a motor of the base of the robot or the
robotic arm.
The main goal of the project is to provide safety to the
bomb disposal squad by providing an extra line of defense.
Provide a remote monitoring and controlling application
for analysis of a suspicious packet (or bomb).Allow the
user to manipulate the packet using the robotic arm. To
provide visual feedback from the site of the packet. To
provide a very user friendly control application.
1. Introduction
We are going to interface of camera so for future purpose
that images capture by camera of bomb will be more
useful. Here we use robotic arm which have 5 degree of
freedom so operation of robot handling will be more softly.
2. Need of work
To construct a basic bomb diffusing robot which can
handle simple tasks like cutting wires, flip on switches ,lift
light objects, etc. and a simple autonomous robot to help in
the transit of the bomb. Also gives video feedback to us so
effective handling of robot can be possible.
3. Review of literature survey
Design and Implementation of a Bomb Diffusing
Surveillance Robot using RF Technology is paper by
Reddy Pannnala; DR. R.V. Krishnaiah is an author of this
paper, this paper published in 2013. Advantages of this
project are a robot that can be controlled by hand gestures
and by a RF remote. This project is much useful for mines
detection, surveillance applications. In this project RF
module is use so that range is very small.
Bomb Detection and Diffusion in Planes by application
of robotics, Prashant Limje, Shailesh Khekale is a author
of this paper, this paper published in 2013. Advantage of
his project is, they have idea dynamic3D videogame is
www.ijsret.org
248
International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882
Volume 5, Issue 4, April 2016
realized: the paper provides the reference for the mission to
find and retrieve a bomb placed inside an airplane. But it is
Difficult to achieve reliability.
Hand Gesture Recognition Bomb Diffusing
Surveillance Robot is paper of Sagar Radive, Neha
Lokhande, Apoorva Kamat, Shubhrojit Chakraborty,
Vishal Pande National Conference on Emerging Trends in
Engineering & Technology 2012the hand gesture
recognition makes the robot more user friendly but also
there is need of Improvising the range of wireless
communication so as to be able to put to a wider use. A
Multipurpose Robot for Military Tribute to the Defense
Ministry is paper of V. Prasanna Balaji & H. Goutham,
International Journal on Theoretical and Applied Research
in Mechanical Engineering (IJTARME), 2013 this also
helps on remote bomb detonation and automatic bomb
detection. Our robot also has terrain climbing facility so
that it can be used in hilly regions. Future aim is to reduce
the response time to a greater extent.
The outcomes of literature survey are followings
: For more user friendly operation video camera is
beneficial.
: Due to wire range may decrease so we are going to use
RF module.
: For more soften operation we will use 5-DOF.
3.1 Outcomes of literature survey.
. For more user friendly operation video camera is
beneficial.
. Due to wire range may decrease so we are going to use
RF module.
. For more soften operation we will use 5-DOF
II.
Fig 4.2 Block diagram of Transmitter
Fig 4.3 Block diagram of Receiver
FIGURES
4. Block Diagram
Fig 4.4 Block diagram of camera
Fig 4.1 Block diagram of project
www.ijsret.org
249
International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882
Volume 5, Issue 4, April 2016
to risk their lives by approaching the bomb or the
suspicious packet without any safety and precautions.
Our robot provides an extra layer of protection to the bomb
disposal squad by allowing them to check and analyze a
suspicious packet before actually approaching it for
disposal. Wireless robots reduce or eliminate a bomb
technicians time-on-target. Provide video feedback to
operator so more safety to bomb disposal squad.
5. Circuit diagram
7. Hardware Used
7.1 PIC microcontroller
7.2 base of robot
7.3 robotic arm
7.4 Switches
7.5 DC motors
7.6 Battery
7.7 wireless camera
7.8 Wireless Transmission module
7.9 pc/laptop
Fig.5.1 Circuit diagram of transmitter section
7. 1.1 PIC Microcontroller
Features:
: Flash Memory: 14.3 Kbytes (8192 words)
: Data SRAM: 368 bytes
: Data EEPROM: 256 bytes
: Self-reprogrammable under software control
: In-Circuit Serial Programming via two pins(5V)
: Watchdog Timer with on-chip RC oscillator
: Programmable code protection
: Power-saving Sleep mode
7.1.2 RF module
Fig.5.2 Circuit diagram of receiver section
6. Implication (Social Impact)
The main idea of this robot is to provide the bomb disposal
squad with safety and security from the risks that they face
every day.
The bomb disposal squad of has metal detectors and other
equipment for bomb detection and disposal, but they have
www.ijsret.org
Fig 7.1 CC 2500 RF module
250
International Journal of Scientific Research Engineering & Technology (IJSRET), ISSN 2278 0882
Volume 5, Issue 4, April 2016
Description:
The CC2500 is a low-cost 2.4 GHz transceiver designed
for very low-power wireless applications. The circuit is
intended for the 2400-2483.5 MHz ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency band. The RF transceiver is integrated with a highly
configurable baseband modem. The modem supports various modulation formats and has a configurable data rate up
to 500k Baud.
[3] A Multipurpose Robot for Military Tribute to Defense
Ministry, V. Prasanna, Balaji & H. Goutham, International
Journal on Theoretical And Applied Research in
Mechanical Engineering (IJTARME), 2013
[4] Bomb Detection and diffusion in Planes by
Application of Robotics, Prashant Limje, Shailesh
Khekale, Special Issue for National Conference on Recent
Advances in Technology And Management for Integrated
Growth, 2013.
7.1.3Wireless Camera
[5] PIC Microcontroller and Embedded Systems: Using
Assembly and C for PIC16 by Muhammad Mazedi.
[6] Serial Camera Module Programming Instructions and
Tutorial by future electronics.
[7] GSM-based versatile robotic vehicle using Pic microcontroller, Abhishek Sharma.
Fig 7.2 Wireless Camera
Key Features:
Image sensor-CMOS
Signal system-PAL/CCIRNTSC/EIA
Horizontal resolution-380 TV line
Scan Freq.-PAL/CCIR:50HZ/NTSC/ELA:60
Antenna-50ohm SMA
Demodulation mode-FM
Transmission power supply-DC 9V
Receiving Freq.-1.2G/2.4G
8. Problem Statement
To construct a basic bomb diffusing robot which can
handle simple tasks like cutting wires, flip on switches, lift
light objects, etc. and a simple autonomous robot to help in
the transit of the bomb. Also gives video feedback to us so
effective handling of robot can be possible.
REFERENCES
[1] Design and Implementation of Bomb Diffusion Sing
Surveillance Robot using RF Technology Reddy
Pannnala, DR. R.V. Krishnaiah, International Journal of
VLSI system Design and communication system 2013.
[2] Hand Gesture Recognition Bomb Diffusing
Surveillance Robot, Sagar Randive, Neha Lokhande,
Apoorva Kamat, Shubhrojit Chakraborty, Vishal Pande,
National Conference On Emerging Trends in Engineering
& Technology 2012.
www.ijsret.org
251
