Scribd
Upload
319 views

LPDDR4 SDRAM Controller Core

DDR controller cores

Uploaded by

rajivsharma1610
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
319 views

LPDDR4 SDRAM Controller Core

DDR controller cores

Uploaded by

rajivsharma1610
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LPDDR4 SDRAM Controller Core

Product Highlights

Block Diagram

Maximizes bus efficiency via LookAhead command processing, Bank


Management and Auto-Precharge

sdram_lb
Bank
Management
Bank
Management

Minimal latency achieved via parameterized pipelining

Supports full rate, half-rate and


quarter-rate clock operation
Multi-mode controller support

DFI Control Interface

l_addr
l_b_size
l_auto_pch
l_r_req
l_w_req
l_busy

MultiBurst
(optional)

Queue
Control

DFI Status Interface


Control and Timing

l_d_req
l_r_valid

DFI Update Interface

Full run-time configurable timing


parameters and memory settings
Initialization
Control

Supports LPDDR4 Data Bus Inversion (DBI) and Data Mask (DM)
Supports self-refresh, partial array self-refresh, power-down, and
deep power down modes
DFI Compatible

DDR PHY

Achieves high clock rates with


minimal routing constraints

Refresh / ZQCal Control

l_datain
l_dm_in
l_dataout

DFI Write Data Interface


Data Control
DFI Read Data Interface

Config Ports
Status Ports

Full set of Add-On Cores available


Delivered fully integrated and
verified with target DDR PHY
Minimal ASIC gate count

sdram_csr (optional)
APB

Broad range of ASIC platforms


supported
Source code available

I2C

Customization and Integration


services available

Product Overview
Northwest Logics Low Power Double Data Rate 4 (LPDDR4)
SDRAM Controller Core is designed for use in applications requiring high memory throughput, high clock rates and full programmability.
The core accepts commands using a simple local interface and
translates them to the command sequences required by
LPDDR4 SDRAM devices. The core also performs all initialization, refresh and power-down functions.
The core uses bank management modules to monitor the status
of each SDRAM bank. Banks are only opened or closed when
necessary, minimizing access delays.
The core queues up multiple commands in the command
queue. This enables optimal bandwidth utilization for both
short transfers to highly random address locations as well as
longer transfers to contiguous address space. The command
queue is also used to opportunistically perform look-ahead
activates, precharges and auto-precharges further improving
overall throughput.

Copyright 2016 Northwest Logic

The core is provided with run-time programmable inputs for all


memory timing parameters and configuration settings. This
ensures compatibility with all LPDDR4 SDRAM configurations.
Add-On Cores such as a Multi-Port Front-End and Reorder Core
can be optionally delivered with the core. The core is delivered fully integrated and verified with the target DDR PHY.
Northwest Logic supports a broad range of third party and its
own soft DDR PHY. Contact Northwest Logic for more information.
Northwest Logic also provides IP Core customization services.
Contact Northwest Logic for a quote.
Product Deliverables:
Core (Netlist or Source Code)
Testbench (Source Code)
Complete Documentation
Expert Technical Support & Maintenance Updates

13

Northwest Logic Proprietary

You might also like