Manual de Usuario Nitsuko TX
Uploaded by
a_gz_spManual de Usuario Nitsuko TX
Uploaded by
a_gz_spNitsuko TX User Guide
ANSWER INCOMING CALL
RINGING EXTENSION
1. Lift Handset
NON RINGING EXTENSION
1. Lift Handset or Press SPK Key
2. Press the flashing line key.
TO PLACE AN OUTGOING CALL
USING HANDSET
1. Lift Handset
2. Select Idle line key
3. Dial telephone number
HANDSFREE
1. Select Idle line key
OR
2. Dial 0
3. Dial Telephone number
TO PLACE INTERCOM CALL
1. Lift Handset
OR
2. Press SPK key
3. Then dial extension number
OR
4. Press DSS (1-10) key
5. For pre programmed extension number.
N.B DSS = Extension Keys
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
A.B.N 92 002 034 844
PHONE: (02) 9894 9895 FAX: (02) 9899 4252
SYDNEY MELBOURNE PERTH ADELAIDE BRISBANE
Nitsuko TX User Guide
TO ANSWER AN INTERCOM CALL
USING HANDSET: Lift Handset
HANDSFREE: Phone will beep, talk back to keyset.
TO PLACE A CALL ON HOLD
1. Press HOLD key
2. Hang up (Line key will flash green)
TO RETRIEVE A CALL ON HOLD
1. Lift handset
2. Press flashing line key
TO TRANSFER A CALL
UNANNOUNCED
1.
2.
3.
4.
5.
Place call on HOLD
Press ICM key
Dial extension number
OR Press DSS key
Press TRFR key and hang up
ANNOUNCED
1.
2.
3.
4.
5.
Press ICM key
Dial extension number
OR Press DSS key
Announce the call
Press TRFR key and hang up.
LAST NUMBER REDIAL
1. Select a line key
2. Press LND key
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
A.B.N 92 002 034 844
PHONE: (02) 9894 9895 FAX: (02) 9899 4252
SYDNEY MELBOURNE PERTH ADELAIDE BRISBANE
Nitsuko TX User Guide
TO ADJUST VOLUMES
Volumes are adjusted in whichever mode is in use. Eg. when the phone is ringing
press volumes up or down to adjust the ring volume. The phone will automatically
stay at this level.
use volume /\ or \/ to adjust.
DO NOT DISTURB
Press DND/CONF key on/off
PAGING
1. Lift handset
2. Press ICM Key
3. Dial 80
OR
4. Pre Programmed PAGE key
TO STORE ONE TOUCH DIALING
1.
2.
3.
4.
5.
6.
Press ICM Key
Press DC Key & *
Press a ONE TOUCH KEY (1-10)
Dial number to be stored
Repeat steps 2-4 for additional numbers
Press SPK to exit
TO USE ONE TOUCH DIALING
1. Select a line
2. Press ONE TOUCH KEY (1-10)
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
A.B.N 92 002 034 844
PHONE: (02) 9894 9895 FAX: (02) 9899 4252
SYDNEY MELBOURNE PERTH ADELAIDE BRISBANE
Nitsuko TX User Guide
TO STORE ABBREVIATED DIAL (FROM STATION 10 ONLY)
1.
2.
3.
4.
5.
6.
Press ICM Key
Press DC Key & *
Dial abbreviated number (00-99)
Dial phone number to be stored
Repeat steps 2-4 for additional numbers
Press SPK key to exit.
TO USE ABBREVIATED DIAL
1.
2.
3.
4.
Select a line
Lift Handset or press SPK
Press DC Key
Dial abbreviated number (00-99)
TO STORE DIRECTORY DIAL
NAMES FOR SPEED DIALS (STATION 10 ONLY)
1. Press DC Key Twice
2. Press HOLD Key
3. Dial abbreviated No (00-99) + *
4. Input letter by edit mode (see last page)
5. Press HOLD
6. Press next number
OR
7. Press SPK to exit.
TO ACCESS DIRECTORY DIAL
1.
2.
3.
4.
5.
Press DC key
Dial 6
Enter first letter of name
Find (# = backward scroll, * = forward scroll)
Press line key.
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
A.B.N 92 002 034 844
PHONE: (02) 9894 9895 FAX: (02) 9899 4252
SYDNEY MELBOURNE PERTH ADELAIDE BRISBANE
Nitsuko TX User Guide
CONFERENCE FACILITY
INTERNAL: Enables user to establish an outside call & then add up five additional inside parties.
TO ACTIVATE
1. Establish outside call
2. Press CONF key
3. Press ICM key
4. Dial extension of other party
5. Press CONF key to establish conference
6. Repeat steps 2 5 to add more parties
7. To end Hang up.
EXTERNAL: Enables up to two outside parties & multiple inside parties
TO ACTIVATE
1. Establish first outside call
2. Press CONF key
3. Establish second outside call
4. Press CONF key
5. To end hang up
AUTOMATIC REPEAT DIAL: Automatically redials last number for X number of attempts
TO ACTIVATE
1. Press OPAC key on busy Or no answer.
2. Dial 1
3. Replace handset or press SPK key
4. System will automatically commence feature
TO CANCEL
1. Lift Handset and replace.
CALL PICK UP
INTERNAL CALLS
1. Lift handset
2. Dial ringing extension number
3. Press #
INCOMING CALLS
1. Lift handset
2. Press ICM key
3. Dial 96
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
A.B.N 92 002 034 844
PHONE: (02) 9894 9895 FAX: (02) 9899 4252
SYDNEY MELBOURNE PERTH ADELAIDE BRISBANE
Nitsuko TX User Guide
TO CALL FORWARD TO INTERNAL EXTENSION
1.
2.
3.
4.
5.
Press SPK Key & ICM
Press TRFR Key
Dial destination extension
Dial option code (see below)
Press SPK Key
OPTIONS
0 - IMMEDIATE
1 - BUSY
2 - UNANSWERED
3 - UNANSWERED/BUSY
TO CANCEL
1. Press SPK Key
2. Press TRFR key twice
SETTING DATE & TIME (FROM STATION 10 ONLY)
1. Press SPK Key & ICM
2. Press OPAC key
3. Press CLEAR Key
4. Enter Year (eg 2000)
5. Dial *
6. Enter Date (eg Month & Date)
7. Dial *
8. Enter Day (eg 0-6, 0 = Sunday)
9. Dial *
10. Enter Time (24 hour)
11. Dial *
12. Press SPK to exit
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
A.B.N 92 002 034 844
PHONE: (02) 9894 9895 FAX: (02) 9899 4252
SYDNEY MELBOURNE PERTH ADELAIDE BRISBANE
Nitsuko TX User Guide
INPUT LETTER MODE
Using the one touch keys you can create a message or name for each line or
extension. Each dial key contains three letters or symbols.
The message or name can be up to 8 digits long consisting of alphanumeric
characters, symbol marks and spaces.
OPERATION
1.
2.
3.
4.
5.
Dial key (0-9) numbers
One touch key (1-3) with Dial Key (0-9) equal letters & Symbols
One touch key 4 equals space
One touch key 5 equals Delete a character
One touch key 6 equals Delete all characters
ENTERING NAMES FOR EXTENSIONS (FROM STATION 10 ONLY)
1.
2.
3.
4.
5.
6.
7.
Press DC key twice
Press ICM
Dial extn number to store (eg. 10)
Dial *
Input name by input letter mode
Press ICM repeat from step 3
Press SPK to exit
PROGRAMMING DSS KEYS
1.
2.
3.
4.
5.
Lift Handset
Press DC key & #
Press DSS to be programmed
Dial extension number
Hang up or repeat from step 2
ALL SYSTEMS COMMUNICATIONS PTY LIMITED T/AS PLANET TELECOMMUNICATIONS (NSW)
UNIT D1, 2 PACKARD AVENUE, CASTLE HILL NSW 2154
