20461C: Querying Microsoft SQL

Server
Microsoft Hyper-V Classroom Setup
Guide
Contents
Introducing Microsoft Hyper-V
1
Setup Overview
2
Classroom Requirements
2
Hardware
2
Software
3
Classroom Configuration
3
Instructor Computer Checklist
4
Instructor Computer Setup
5
1. Install the Hyper-V Server Role
6
2. Set Up the MSL-TMG1 Virtual Machine
7
3. Install the Virtual Machine Files
7
4. Create a Setup Share
9
5. Copy the Virtual Machine Files to the Student Computer
9
6. Run the VM-Pre-Import script
10
7. Import the Virtual Machines on the Instructor Computer
10
8. Configure the Virtual Machines on the Instructor Computer 10
9. Install the PowerPoint Slides
12
Student Computer Checklist
13
Student Computer Setup
14
1. Install the Hyper-V Server Role
14
2. Install the Base Image / Virtual Machine Files
14
Appendix A Keyboard Layout
15

Information in this document, including URL and other Internet Web site references, is subject to change
without notice. Unless otherwise noted, the example companies, organizations, products, domain names, e-mail
addresses, logos, people, places, and events depicted herein are fictitious, and no association with any real
company, organization, product, domain name, e-mail address, logo, person, place or event is intended or
should be inferred. Complying with all applicable copyright laws is the responsibility of the user. Without limiting
the rights under copyright, no part of this document may be reproduced, stored in or introduced into a retrieval
system, or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or
otherwise), or for any purpose, without the express written permission of Microsoft Corporation.
Microsoft may have patents, patent applications, trademarks, copyrights, or other intellectual property rights
covering subject matter in this document. Except as expressly provided in any written license agreement from
Microsoft, the furnishing of this document does not give you any license to these patents, trademarks,
copyrights, or other intellectual property.
The names of manufacturers, products, or URLs are provided for informational purposes only and Microsoft
makes no representations and warranties, either expressed, implied, or statutory, regarding these
manufacturers or the use of the products with any Microsoft technologies. The inclusion of a manufacturer or
product does not imply endorsement of Microsoft of the manufacturer or product. Links may be provided to third
party sites. Such sites are not under the control of Microsoft and Microsoft is not responsible for the contents of
any linked site or any link contained in a linked site, or any changes or updates to such sites. Microsoft is not
responsible for webcasting or any other form of transmission received from any linked site. Microsoft is
providing these links to you only as a convenience, and the inclusion of any link does not imply endorsement of
Microsoft of the site or the products contained therein.
2014 Microsoft Corporation. All rights reserved.
Microsoft and the trademarks listed at
http://www.microsoft.com/about/legal/en/us/IntellectualProperty/Trademarks/EN-US.aspx are trademarks of the
Microsoft group of companies. All other trademarks are property of their respective owners

Product Number: 20461C

20461C: Querying Microsoft SQL Server

Introducing Microsoft Hyper-V

Important Note: This setup requires Windows Server 2012 Hyper-V. To import virtual
machines successfully to Windows Server 2012 Hyper-V you will have to run the VM-PreImport scripts which will create symbolic links to the Base/Middle-Tier images in the
C:\Program Files\Microsoft Learning\20461\Drives\VirtualMachineName\Virtual Hard
Disks\ folders.

This learning product is designed using Microsoft Hyper-V running on Windows

Server 2012. Hyper-V is a virtualization technology that allows a single computer to act
as a host for one or more virtual machines. The virtual machines use a set of virtual
devices that might or might not map to the physical hardware of the host computer.
The software that is installed onto the virtual machine is unmodified, full-version, retail
software that operates exactly as it does when it is installed onto physical hardware.
The following definitions will help you with the remainder of this document:

Hyper-V: Hyper-V is a server application that enables users to run a broad range of
operating systems simultaneously on a single physical server.

Host Computer: The physical computer onto which an operating system and the
Hyper-V server role have been installed.

Host Operating System: The operating system that is running on the physical
computer. For this course, the only supported host operating system is Windows
Server 2012.

Virtual Machine: The computer that is running inside Hyper-V. In this document,
Hyper-V refers to the application running on the host, while virtual machine
refers to the guest operating system and any software that is running inside the
Hyper-V application.

Guest Operating System: The operating system that is running inside the virtual
machine.

Note: Pressing CTRL+ALT+DELETE while working with a virtual machine will

display the Windows Security dialog box for the host operating system. To close
the dialog box, press ESC. To access the Windows Security dialog box for a guest
operating system, press CTRL+ALT+END. Other than this difference, software on
a virtual machine behaves as it would behave on a physical computer.

20461C: Querying Microsoft SQL Server

You can configure virtual machines to communicate with the host computer, other virtual
machines on the same host computer, other host computers, virtual machines on other
host computers, other physical computers on the network, or any combination thereof.
The setup instructions that you will follow as part of this classroom setup guide configure
Hyper-V and the Virtual Machines that run on the host. Changing any of the
configuration settings may render the labs for this learning product unusable.

Setup Overview
The host computers must be set up with a 64 bit version of Windows Server 2012 and
must be running on 64 bit hardware. For more information on the supported hardware for
Hyper-V, please see the follow web site: http://www.microsoft.com/hyper-v. For the
purposes of this learning product, it is not necessary for the host computers to be able to
communicate with another network. However, allowing them to communicate with each
other is recommended to make setup easier. The setup procedures below assume that the
host computers can communicate with each other for setup purposes. You should note the
administrators user name and password for the host computers and provide this
information to the instructor.

Classroom Requirements
This learning product requires a classroom with a minimum of one computer for the
instructor and one for each student. Before class begins, use the following information
and instructions to install and configure all computers.

Hardware
The classroom computers require the following hardware and software configuration.
Hardware Level 6+

Processor: Intel Virtualization Technology (Intel VT) or AMD Virtualization (AMDV)

Hard Disk: Dual 120 GB hard disks 7200 RM SATA or better (Striped)

RAM: 8GB or higher. 16 GB or more is recommended for this course.

DVD/CD: DVD drive

Network adapter with Internet connectivity

Video Adapter/Monitor: 17-inch Super VGA (SVGA)

Microsoft Mouse or compatible pointing device

Sound card with amplified speakers

20461C: Querying Microsoft SQL Server

In addition, the instructor computer must be connected to a projection display device that
supports SVGA 1024 x 768 pixels, 16 bit colors.
Note: For the best classroom experience, a computer with solid state disks (SSDs) is
recommended. For optimal performance, adapt the instructions below to install the
20461C-MIA-SQL virtual machine on a different physical disk than the other virtual
machines to reduce disk contention.

Software
Please note that, unless otherwise indicated, this software is not included in the Trainer
Materials disc. This learning product was developed and tested on supported Microsoft
software, which is required for the classroom computers.
Also required, but not included in the Training Materials: Microsoft Office PowerPoint
2007 (instructor computer only).

Classroom Configuration
Each classroom computer will serve as the host for the following virtual machines that
will run in Hyper-V. Domain or workgroup membership does not matter. The network
configuration of the host computers should provide access to the Internet. After
completion of the setup, all computers will be configured to run the virtual machines
named:

MSL-TMG1

20461C-MIA-DC

20461C-MIA-SQL

Estimated Time to Set up the Classroom: 90 Minutes

Note: This course is designed to use an Internet connection inside the virtual
machine. If there is no Internet connection present, this course will need to be
modified to be delivered from a disconnected student machine.
The Internet connection is required to access Microsoft Azure and Office 365, and
the outbound internet connection must have TCP port 1433 open, otherwise Azure
will not connect to the SQL instance in the VM.

20461C: Querying Microsoft SQL Server

Instructor Computer Checklist

1. Install the Hyper-V Server Role.
2. Set Up the MSL-TMG1 Virtual Machine.
3. Install the Virtual Machine Files.
4. Create a Setup Share.
5. Copy the Virtual Machine Files to the Student Computer
6. Run the VM-Pre-Import script
7. Import the Virtual Machines on the Instructor Computer
8. Configure the Virtual Machines on the Instructor Computer
9. Install the PowerPoint Slides. (if needed)

20461C: Querying Microsoft SQL Server

Instructor Computer Setup

Use the instructions in the following section to set up the classroom manually. Before
starting the installation of the instructor computer, a supported operating system and
Microsoft Office Power Point 2007 must be installed on the computer.
Important: The operating systems installed on the virtual machines in this learning
product have not been activated and each virtual machine is in the Notification
state.
You may be prompted to restart the computer when the VM is started for the first
time. This is because of the hardware differences on the Host computer. You can
restart if you wish or just click Restart Later to close the message.

1.

20461C: Querying Microsoft SQL Server

1. Install the Hyper-V Server Role

In this task, you will install the Hyper-V server role on the Windows Server 2012 host
computer.
Important: If Hyper-V is already installed, you can skip this procedure.

1. In the Server Manager console, on the Manage menu, click Add Roles and Features.
2. On the Before you begin page of the Add Roles and Features Wizard, click Next.
3. On the Select installation type page, select Role-based or feature-based
installation, and then click Next.
4. On the Select destination server page, ensure that the local computer is selected, and
then click Next.
5. On the Select Server Roles page, select Hyper-V.
6. In the Add Roles and Features Wizard dialog box, click Add Features.
7. On the Select Server Roles page of the Add Roles and Features Wizard, click Next.
8. On the Select features page, click Next.
9. On the Hyper-V page, click Next.
10. On the Create Virtual Switches page, verify that no selections have been made, and
then click Next.
11. On the Virtual Machine Migration page, click Next.
12. On the Default Stores page, review the location of Default Stores, and then click
Next.
13. On the Confirm Installation Selections page, select Restart the destination server
automatically if required.
14. In the Add Roles and Features Wizard dialog box, review the message about
automatic restarts, and then click Yes.
15. On the Confirm Installation Selections page, click Install.
16. Ensure that you restart the machine.
17. After the final restart, log on using administrator credentials.

20461C: Querying Microsoft SQL Server

2. Set Up the MSL-TMG1 Virtual Machine

You must set up the TMG Virtual Machine before continuing to set up the course Virtual
Machines. The MSL-TMG1 virtual machine and its related setup guide can be
downloaded from the MCT Download Center in the Base Virtual Hard Disks Mid-Tiers
(ENGLISH) folder. The TMG VM requires Base11A-WS08R2SP1.VHD which is also
available on the DLC in the Base Virtual Hard Disks (ENGLISH) folder.
After completing the steps in the MSL-TMG1 setup guide, shut down the MSL-TMG1
virtual machine and in Hyper-V Manager, edit its settings to set its memory to the static
value 512 MB. Then start MSL-TMG1 and ensure that it is running for the remainder of
the build process.

3. Install the Virtual Machine Files

After installing the Hyper-V server role, you will need to follow the following steps to
copy the base images, middle tiers and virtual machine files to the server and then
configure the virtual machines.

Extract the Course Images

To Extract the Base Images:
1. From the courseware source files location, double-click Base14AWS12R2.part01.exe.
2. In the Official Microsoft Learning Product License Terms window, click Accept
to indicate that you accept the terms in the license agreement.
3. In the WinRAR self-extracting archive window, in the Destination folder text box,
ensure that C:\Program Files\Microsoft Learning\Base is listed, and then click
Extract. Please wait while the base virtual hard disk file is extracted. This might take
a few minutes.
To Extract the Middle Tier Images:
1. Copy the files from the courseware source files location to a local folder, and then
double-click MT14-SQL-MIA-DC.msi.
2. In the MT14-SQL-MIA-DC dialog box, on the Welcome to the MT14-SQL-MIADC Setup Wizard page, click Next.
3. On the Select Installation Folder page, click Next.
4. On the Confirm Installation page, click Next.
5. On the License Agreement page, click I Agree to indicate that you accept the terms
in the license agreement, and then click Next.
6. In the WinRAR self-extracting archive window, in the Destination folder box,
ensure that C:\Program Files\Microsoft Learning\Base\Drives is listed, and then
click Extract.

20461C: Querying Microsoft SQL Server

7. Please wait while the middle tier virtual hard disk file is extracted. This might take a
few minutes. Once completed you can delete the source files from the local folder.
8. On the Installation Complete page, click Close.
9. Repeat steps 1 through 8 for the following middle tier drives:

MT14-SQL-MIA-SQL.msi

To Extract the Virtual Machines:

1. From the courseware source files location, double-click 20461C-MIADC.part01.exe.
2. In the Official Microsoft Learning Product License Terms window, click Accept to
indicate that you accept the terms in the license agreement.
3. In the WinRAR self-extracting archive window, in the Destination folder text box,
ensure that C:\Program Files\Microsoft Learning\20461\Drives is listed, and then
click Extract.
4. Repeat steps 1 through 3 for the following virtual machines:

20461C-MIA-SQL.part001.exe

Note: After completing the extraction of all of the classroom files, you should have
the following files installed.
File

In Folder

Base14A-WS12R2.vhd

C:\Program Files\Microsoft Learning\Base

MT14-SQL-MIA-DC.vhd

C:\Program Files\Microsoft Learning\Base\Drives

MT14SQL-MIA-SQL.vhd

C:\Program Files\Microsoft Learning\Base\Drives

VM-Pre-Import-20461C-MIA-DC.bat

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-DC

20461C-MIA-DC.vhd

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-DC\Virtual Hard
Disks

<GUID>.xml

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-DC\Virtual
Machines

VM-Pre-Import-20461C-MIA-SQL.bat

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-SQL

20461C-MIA-SQL.vhd

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-SQL\Virtual Hard
Disks

20461C-MIA-SQL-Allfiles.vhd

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-SQL\Virtual Hard
Disks

20461C: Querying Microsoft SQL Server

File

In Folder

<GUID>.xml

C:\Program Files\Microsoft
Learning\20461\Drives\20461C-MIA-SQL\Virtual
Machines

4. Create a Setup Share

In this task, you will share virtual machine files for copying to student computers.
1. Share the C:\Program Files\Microsoft Learning\Base folder using a share name of
Base_Drives.
2. Share the C:\Program Files\Microsoft Learning\20461\Drives folder using a share
name of 20461_Drives.
Note: For information on how to set up a share in Windows Server 2012, see the
topic Share a Resource in Windows Help and Support.

5. Copy the Virtual Machine Files to the Student

Computer
Note: You must perform the file copy prior to importing the virtual machines. Once
you import the virtual machines, you will not be able to import them again.

1. From the student computer, copy all of the files from the Base_Drives share on the
instructor computer to C:\Program Files\Microsoft Learning\Base.
2. Copy all of the files from the 20461_Drives share on the instructor computer to
C:\Program Files\Microsoft Learning\20461\Drives.
Note: Ensure that all files are copied.

C:\Program Files\Microsoft Learning\20461 and all included folders and files

C:\Program Files\Microsoft Learning\Base

3. Ensure that you have copied the files using a permission retaining software such as
RoboCopy or XCopy.
4. Check that all permissions have been retained, by looking at the directories above
and making sure they are not Read-Only.
5. Add the virtual machines to the Hyper-V management console. For detailed
instructions see the instructor computer setup.

10

20461C: Querying Microsoft SQL Server

6. Run the VM-Pre-Import script

In this task, you will run the VM-Pre-Import-xxxxx-VirtualMachineName.bat file. This
script will create links to the Base and Mid-Tier images in the import folder necessary for
importing each VM.
1. Double-click VM-Pre-Import-20461C-MIA-DC.bat (found in the C:\Program
Files\Microsoft Learning\20461\Drives\20461C-MIA-DC folder).
2. Verify that the links are created in the following folder:

C:\Program Files\Microsoft Learning\20461\Drives\20461C-MIA-DC\Virtual

Hard Disks

3. Double-click VM-Pre-Import-20461C-MIA-SQL.bat (found in the C:\Program

Files\Microsoft Learning\20461\Drives\20461C-MIA-SQL folder).
4. Verify that the links are created in the following folder:

C:\Program Files\Microsoft Learning\20461\Drives\20461C-MIA-SQL\Virtual

Hard Disks

7. Import the Virtual Machines on the Instructor

Computer
1. In Hyper-V Manager, in the Actions pane, click Import Virtual Machine.
2. In the Before You Begin dialog box, click Next.
3. In the Import Virtual Machine dialog box, click Browse. Browse to C:\Program
Files\Microsoft Learning\20461\Drives, click 20461C-MIA-DC, and then click
Select Folder, click next.
4. In Select Virtual Machine dialog box, click next.
5. In Choose Import Type dialog box, ensure Register the virtual machine in-place
(use the existing unique ID) selected, click next.
6. In the Completing Import Wizard, click Finish.
7. Repeat Steps 1-6 for the following virtual machines:

20461C-MIA-SQL

8. Configure the Virtual Machines on the Instructor

Computer
1. Right-click 20461C-MIA-DC, and then click Start.
2. Right-click 20461C-MIA-DC, and then click Connect.

20461C: Querying Microsoft SQL Server

11

3. Verify that the server starts. Log on as ADVENTUREWORKS\Administrator

using the password Pa$$w0rd. Verify that the logon is successful.
4. If Windows installs new hardware, and you are prompted to restart, click Restart
Now. When the virtual machine restarts, log back in.
5. Repeat steps 14 for the 20461C-MIA-SQL virtual machine, but log on as
ADVENTUREWORKS\Student with the password Pa$$w0rd.
6. In both virtual machines, on the Start screen, type Network and Sharing Center,
and in the Search pane, in the Settings category, click Network and Sharing
Center. Then click Change Adapter Settings.
7. Right-click the local area connection adapter and click Properties, and then select
Internet Protocol Version 4 (TCP/IPv4) and click Properties.
8. Ensure that the connection uses the following settings, and then click OK.
Virtual Machine

20461C-MIA-DC

20461C-MIA-SQL

IP address

10.10.0.10

10.10.0.20

Default gateway

10.10.0.1

10.10.0.1

Preferred DNS server

10.10.0.10

10.10.0.10

9. If prompted to remove the static IP address for a previously configured adapter that is
no longer present, click Yes. Then click Close.
10. In the MIA-SQL virtual machine, open a command prompt and use the following
command to verify network connectivity to the domain controller:
Ping MIA-DC
This command should return four replies from a computer with the IP address
10.10.0.10.
11. If the MSL-TMG1 virtual machine has been configured to use an External Network
virtual network with Internet connectivity, in the MIA-SQL virtual machine, start
Internet Explorer and verify that you can open a web site such as www.bing.com. If
not, verify that you have configured the MSL-TMG1 server networking settings and
enabled the appropriate firewall rules in MSL-TMG1 as specified in the MSL-TMG1
setup guide.
12. In the MIA-SQL virtual machine, open an administrative command prompt and run
the following command (including the quotation marks):
"%ProgramFiles%\Microsoft Office\Office15\ospprearm.exe"
13. In the MIA-SQL virtual machine, in the administrative command prompt, run the
following command, and click OK on the resulting message box:
slmgr -rearm

12

20461C: Querying Microsoft SQL Server

14. Shut down the MIA-SQL virtual machine.

15. In the MIA-DC virtual machine, open an administrative command prompt and run
the following command. Click OK on the resulting message box:
slmgr -rearm
16. Shut down the MIA-DC virtual machine.
17. In Hyper-V Manager, under Virtual Machines. perform the following steps for each
virtual machine:
a. Right-click the virtual machine and click Snapshot.
b. Wait for the snapshot process to finish.
c. In the Snapshots pane, right-click the snapshot name, click Rename.
d. Type StartingImage; and then press Enter.

9. Install the PowerPoint Slides

Install the PowerPoint slides for the learning product by extracting the files included in:

20461C-ENU-PowerPoint.exe

20461C: Querying Microsoft SQL Server

Student Computer Checklist

1. Install the Hyper-V Server Role
2. Install the Base Image / Virtual Machine Files.

13

14

20461C: Querying Microsoft SQL Server

Student Computer Setup

Use the instructions in the following section to set up the classroom manually. Before
starting the installation of the student computer, a supported operating system must be
installed on the computer. You can check the supported systems list at:
http://www.microsoft.com/hyper-v.

Caution: These instructions assume network connectivity between the instructor

computer and the student computers. If you do not have connectivity, Microsoft
Learning recommends copying the activated virtual machines to the student
computers by means of a manually created DVD or universal serial bus (USB)
drive.

1. Install the Hyper-V Server Role

Note: If Hyper-V is already installed, you can skip this procedure.
For detailed instructions see the instructor computer setup.

2. Install the Base Image / Virtual Machine Files

Note: Ensure that all extracted courseware virtual machine files were copied from
the Instructor computer during the Instructor Computer setup.

C:\Program Files\Microsoft Learning\20461 and all included folders and

files

C:\Program Files\Microsoft Learning\Base

1. Check that all permissions have been retained, by looking at the directories above
and making sure they are not Read Only.
2. Run the VM-Pre-Import script. For detailed instructions see the instructor
computer setup.
3. Add the virtual machines to the Hyper-V management console. For detailed
instructions see the instructor computer setup.

20461C: Querying Microsoft SQL Server

15

Appendix A Keyboard Layout

The virtual machines were developed using the English (United States) layout shown
below.

If your physical keyboard doesnt match the above layout, you may need to refer to the
above layout for the character positions used to logon. For future logons and usage
throughout the labs, you may want to install your keyboard layout in the virtual machine.