RL-1256

RADIAL LEADED
POWER LINE CHOKES

EPOXY
COATED
CORES

DESCRIPTION

FEATURES & APPLICATIONS

Power Line Chokes

Available in 367 standard values covering a wide range

of inductance and current
High saturation flux density material is ideal for use
in switching regulated power supply applications
Ideal wherever high current choke values in a small
physical size are needed
Typical applications include: power amplifiers, power supplies,
SCR and TRIAC controls, speaker crossover networks and filters

ENVIRONMENTAL DATA

Storage temperature range:

-55C to +130C
Operating temperature range:
-40C to +130C

PACKAGING INFORMATION
Packaging information: pg. 493

Verify operation with sample in actual circuit. Order samples at www.rencousa.com.

MECHANICAL DIMENSIONS
U.S. Standard (mm)

PART NUMBER

A (MAX.)

B (MAX.)

RL-1256-1

0.66 (16.76)

0.85 (21.59)

RL-1256-2

0.83 (21.08)

0.85 (21.59)

RL-1256-3

1.10 (27.94)

0.85 (21.59)

RL-1256-4

1.60 (40.64)

1.10 (27.94)

RL-1256-5

1.60 (40.64)

1.50 (38.10)

RL-1256-6

2.00 (50.80)

1.50 (38.10)

RL-1256-7

2.40 (60.96)

1.50 (38.10)

RL-1256-8

2.40 (60.96)

2.60 (66.04)

C (REF.)
Clearance Hole
For 4/40
Screw
Clearance Hole
For 8/32
Screw
With Washer

D (MIN.)

PART NUMBER PART WEIGHT

0.50 (12.70)

RL-1256-1

13.0g (0.46oz)

0.50 (12.70)

RL-1256-2

22.0g (0.78oz)

0.50 (12.70)

RL-1256-3

38.0g (1.34oz)

0.50 (12.70)

RL-1256-4

118.0g (4.16oz)

0.50 (12.70)

RL-1256-5

157.0g (5.54oz)

0.50 (12.70)

RL-1256-6

220.0g (7.77oz)

0.50 (12.70)

RL-1256-7

334.0g (12.13oz)

0.50 (12.70)

RL-1256-8

583.0g (20.57oz)

SEE SPECIFICATION TABLES FOR E DIMENSIONS

SIDE VIEW

BOTTOM VIEW

SCHEMATIC

B
ST

FN

CHOKES

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

RL-1256-1
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-1-1.0

1.00

0.003

87.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-1.2

1.20

0.003

68.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-1.5

1.50

0.004

56.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-1.8

1.80

0.004

56.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-2.2

2.20

0.005

47.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-2.7

2.70

0.005

47.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-3.3

3.30

0.005

40.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-3.9

3.90

0.006

36.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-4.7

4.70

0.007

32.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-5.6

5.60

0.007

29.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-6.8

6.80

0.008

26.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-8.2

8.20

0.009

24.5

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-10

10.0

0.010

21.2

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-12

12.0

0.011

19.0

9.0

0.550 (13.97)

0.054 (1.37)

RL-1256-1-15

15.0

0.015

17.5

7.2

0.500 (12.70)

0.048 (1.22)

RL-1256-1-18

18.0

0.016

16.5

7.2

0.500 (12.70)

0.048 (1.22)

RL-1256-1-22

22.0

0.025

15.8

5.5

0.500 (12.70)

0.043 (1.09)

RL-1256-1-27

27.0

0.030

14.4

4.5

0.500 (12.70)

0.039 (0.99)

RL-1256-1-33

33.0

0.040

13.2

4.0

0.406 (10.31)

0.035 (0.89)

RL-1256-1-39

39.0

0.046

11.8

4.0

0.469 (11.91)

0.035 (0.89)

RL-1256-1-47

47.0

0.062

11.0

2.8

0.469 (11.91)

0.031 (0.78)

RL-1256-1-56

56.0

0.069

10.0

2.8

0.485 (12.32)

0.031 (0.78)

RL-1256-1-68

68.0

0.077

8.9

2.8

0.500 (12.70)

0.031 (0.78)

RL-1256-1-82

82.0

0.083

8.2

2.8

0.500 (12.70)

0.031 (0.78)

RL-1256-1-100

100.0

0.095

7.5

2.8

0.500 (12.70)

0.031 (0.78)

RL-1256-1-120

120.0

0.127

5.8

2.0

0.480 (12.19)

0.028 (0.71)

RL-1256-1-150

150.0

0.181

5.6

1.6

0.480 (12.19)

0.025 (0.64)

RL-1256-1-180

180.0

0.217

5.1

1.6

0.480 (12.19)

0.025 (0.64)

RL-1256-1-220

220.0

0.240

4.3

1.6

0.480 (12.19)

0.025 (0.64)

RL-1256-1-270

270.0

0.300

4.1

1.6

0.480 (12.19)

0.022 (0.56)

RL-1256-1-330

330.0

0.336

3.8

1.3

0.480 (12.19)

0.022 (0.56)

RL-1256-1-390

390.0

0.460

3.3

1.0

0.480 (12.19)

0.022 (0.56)

RL-1256-1-470

470.0

0.636

3.2

0.8

0.450 (11.43)

0.020 (0.51)

RL-1256-1-560

560.0

0.696

2.9

0.8

0.450 (11.43)

0.018 (0.46)

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

CHOKES

RL-1256-1
Renco Part No.

RL-1256-2
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-2-1.0

1.00

0.003

108.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-1.2

1.20

0.003

108.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-1.5

1.50

0.003

83.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-1.8

1.80

0.003

68.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-2.2

2.20

0.004

68.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-2.7

2.70

0.005

58.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-3.3

3.30

0.005

58.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-3.9

3.90

0.005

50.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-4.7

4.70

0.005

50.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-5.6

5.60

0.006

44.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-6.8

6.80

0.007

39.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-8.2

8.20

0.007

36.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-10

10.0

0.009

30.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-12

12.0

0.009

27.0

11.4

0.620 (15.75)

0.060 (1.52)

RL-1256-2-15

15.0

0.013

25.0

9.0

0.625 (15.88)

0.054 (1.37)

RL-1256-2-18

18.0

0.018

22.0

7.2

0.630 (16.00)

0.048 (1.22)

RL-1256-2-22

22.0

0.019

21.0

7.2

0.630 (16.00)

0.048 (1.22)

RL-1256-2-27

27.0

0.026

20.5

5.5

0.546 (13.87)

0.043 (1.09)

RL-1256-2-33

33.0

0.029

18.6

5.5

0.546 (13.87)

0.043 (1.09)

RL-1256-2-39

39.0

0.030

17.0

5.5

0.594 (15.09)

0.043 (1.09)

RL-1256-2-47

47.0

0.035

15.1

5.5

0.625 (15.88)

0.041 (1.04)

RL-1256-2-56

56.0

0.039

13.6

5.5

0.625 (15.88)

0.041 (1.04)

RL-1256-2-68

68.0

0.053

12.7

4.8

0.656 (16.66)

0.039 (0.99)

RL-1256-2-82

82.0

0.060

11.3

4.8

0.656 (16.66)

0.039 (0.99)

RL-1256-2-100

100.0

0.080

10.4

4.0

0.593 (15.06)

0.033 (0.84)

RL-1256-2-120

120.0

0.090

9.4

4.0

0.593 (15.06)

0.033 (0.84)

RL-1256-2-150

150.0

0.098

8.6

4.0

0.593 (15.06)

0.033 (0.84)

RL-1256-2-180

180.0

0.110

7.8

4.0

0.671 (17.04)

0.033 (0.84)

RL-1256-2-220

220.0

0.150

7.0

2.8

0.593 (15.06)

0.031 (0.79)

RL-1256-2-270

270.0

0.213

6.3

2.0

0.562 (14.27)

0.030 (0.76)

RL-1256-2-330

330.0

0.305

5.2

1.6

0.590 (14.99)

0.025 (0.66)

RL-1256-2-390

390.0

0.320

4.9

1.6

0.590 (14.99)

0.025 (0.66)

RL-1256-2-470

470.0

0.355

4.5

1.6

0.590 (14.99)

0.025 (0.66)

RL-1256-2-560

560.0

0.388

4.1

1.6

0.590 (14.99)

0.025 (0.66)

RL-1256-2
Renco Part No.

RL-1256-2 TABLE CONTINUES ON FOLLOWING PAGE

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

RL-1256-2, RL-1256-3
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

680.0

0.430

3.7

1.6

0.590 (14.99)

0.025 (0.66)

RL-1256-2-820

820.0

0.590

3.4

1.3

0.590 (14.99)

0.022 (0.56)

RL-1256-2-1000

1000.0

0.818

3.1

1.0

0.590 (14.99)

0.020 (0.50)

RL-1256-2-1200

1200.0

1.14

2.7

0.8

0.590 (14.99)

0.020 (0.50)

RL-1256-2-1500

1500.0

1.26

2.4

0.8

0.590 (14.99)

0.020 (0.50)

RL-1256-2-1800

1800.0

1.39

2.2

0.8

0.590 (14.99)

0.020 (0.50)

RL-1256-2-2200

2200.0

1.54

2.0

0.8

0.590 (14.99)

0.020 (0.50)

Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-3-1.0

1.00

0.003

116.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-1.2

1.20

0.003

116.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-1.5

1.50

0.003

116.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-1.8

1.80

0.003

90.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-2.2

2.20

0.003

90.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-2.7

2.70

0.003

74.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-3.3

3.30

0.003

74.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-3.9

3.90

0.003

62.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-4.7

4.70

0.003

54.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-5.6

5.60

0.003

54.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-6.8

6.80

0.004

47.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-8.2

8.20

0.004

42.0

21.0

0.800 (20.32)

0.084 (2.13)

RL-1256-3-10

10.0

0.006

38.0

17.0

0.700 (17.78)

0.075 (1.90)

RL-1256-3-12

12.0

0.008

35.0

13.5

0.690 (17.53)

0.068 (1.73)

RL-1256-3-15

15.0

0.009

32.0

13.5

0.690 (17.53)

0.068 (1.73)

RL-1256-3-18

18.0

0.010

29.0

13.5

0.690 (17.53)

0.068 (1.73)

RL-1256-3-22

22.0

0.011

25.0

13.5

0.790 (20.07)

0.068 (1.73)

RL-1256-3-27

27.0

0.012

23.0

13.5

0.790 (20.07)

0.068 (1.73)

RL-1256-3-33

33.0

0.017

20.0

13.5

0.790 (20.07)

0.060 (1.52)

RL-1256-3-39

39.0

0.022

19.1

11.4

0.790 (20.07)

0.054 (1.37)

RL-1256-3-47

47.0

0.024

19.0

9.0

0.750 (19.05)

0.054 (1.37)

RL-1256-2
Renco Part No.
RL-1256-2-680

RL-1256-3
Renco Part No.

RL-1256-3 TABLE CONTINUES ON FOLLOWING PAGE

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

RL-1256-3, RL-1256-4
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-3-56

56.0

0.026

17.5

9.0

0.750 (19.05)

0.054 (1.37)

RL-1256-3-68

68.0

0.029

15.6

9.0

0.750 (19.05)

0.054 (1.37)

RL-1256-3-82

82.0

0.032

14.0

9.0

0.750 (19.05)

0.054 (1.37)

RL-1256-3-100

100.0

0.034

13.2

9.0

0.781 (19.84)

0.054 (1.37)

RL-1256-3-120

120.0

0.046

12.1

7.2

0.750 (19.05)

0.051 (1.30)

RL-1256-3-150

150.0

0.064

10.8

5.5

0.781 (19.84)

0.043 (1.09)

RL-1256-3-180

180.0

0.072

9.7

5.5

0.781 (19.84)

0.043 (1.09)

RL-1256-3-220

220.0

0.080

8.7

5.5

0.781 (19.84)

0.041 (1.04)

RL-1256-3-270

270.0

0.110

7.9

4.5

0.750 (19.05)

0.039 (0.99)

RL-1256-3-330

330.0

0.122

7.1

4.5

0.812 (20.62)

0.039 (0.99)

RL-1256-3-390

390.0

0.169

6.7

4.0

0.750 (19.05)

0.035 (0.89)

RL-1256-3-470

470.0

0.187

6.0

4.0

0.750 (19.05)

0.035 (0.89)

RL-1256-3-560

560.0

0.205

5.5

4.0

0.750 (19.05)

0.035 (0.89)

RL-1256-3-680

680.0

0.256

5.0

2.8

0.718 (18.24)

0.031 (0.79)

RL-1256-3-820

820.0

0.288

4.5

2.8

0.843 (22.17)

0.031 (0.79)

RL-1256-3-1000

1000.0

0.426

4.1

2.0

0.750 (19.05)

0.028 (0.71)

RL-1256-3-1200

1200.0

0.462

3.7

2.0

0.750 (19.05)

0.028 (0.71)

RL-1256-3-1500

1500.0

0.518

3.4

2.0

0.750 (19.05)

0.028 (0.71)

RL-1256-3-1800

1800.0

0.705

2.8

1.6

0.770 (19.56)

0.022 (0.56)

RL-1256-3-2200

2200.0

1.02

2.5

1.3

0.770 (19.56)

0.022 (0.56)

RL-1256-3-2700

2700.0

1.14

2.3

1.3

0.770 (19.56)

0.022 (0.56)

RL-1256-3-3300

3300.0

1.27

2.0

1.3

0.750 (19.05)

0.022 (0.56)

RL-1256-3-3900

3900.0

1.67

1.8

1.0

0.750 (19.05)

0.020 (0.51)

RL-1256-3-4700

4700.0

1.86

1.7

1.0

0.750 (19.05)

0.020 (0.51)

Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-4-1.8

1.80

0.002

150.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-2.2

2.20

0.002

150.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-2.7

2.70

0.003

115.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-3.3

3.30

0.003

115.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-3.9

3.90

0.003

95.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-4.7

4.70

0.003

95.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-3
Renco Part No.

RL-1256-4
Renco Part No.

RL-1256-4 TABLE CONTINUES ON FOLLOWING PAGE

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

RL-1256-4
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-4-5.6

5.60

0.004

79.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-6.8

6.80

0.004

79.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-8.2

8.20

0.004

69.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-10

10.0

0.005

61.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-12

12.0

0.005

55.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-15

15.0

0.006

49.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-18

18.0

0.008

41.0

27.0

1.11 (28.19)

0.094 (2.39)

RL-1256-4-22

22.0

0.009

38.0

21.0

1.11 (28.19)

0.084 (2.13)

RL-1256-4-27

27.0

0.010

36.0

21.0

1.15 (29.21)

0.084 (2.13)

RL-1256-4-33

33.0

0.011

31.0

21.0

1.15 (29.21)

0.084 (2.13)

RL-1256-4-39

39.0

0.012

28.0

14.4

1.15 (29.21)

0.084 (2.13)

RL-1256-4-47

47.0

0.018

27.0

14.4

1.14 (28.96)

0.068 (1.73)

RL-1256-4-56

56.0

0.019

26.1

14.4

1.14 (28.96)

0.068 (1.73)

RL-1256-4-68

68.0

0.021

24.4

14.4

1.14 (28.96)

0.068 (1.73)

RL-1256-4-82

82.0

0.023

22.4

14.4

1.14 (28.96)

0.068 (1.73)

RL-1256-4-100

100.0

0.025

20.0

14.4

1.14 (28.96)

0.068 (1.73)

RL-1256-4-120

120.0

0.028

18.0

14.4

1.187 (30.15)

0.068 (1.73)

RL-1256-4-150

150.0

0.040

16.4

11.4

1.125 (28.58)

0.060 (1.52)

RL-1256-4-180

180.0

0.045

14.6

11.4

1.125 (28.58)

0.060 (1.52)

RL-1256-4-220

220.0

0.050

13.2

11.4

1.125 (28.58)

0.060 (1.52)

RL-1256-4-270

270.0

0.056

11.8

11.4

1.156 (29.36)

0.060 (1.52)

RL-1256-4-330

330.0

0.074

11.4

11.4

1.125 (28.58)

0.054 (1.37)

RL-1256-4-390

390.0

0.082

10.1

9.0

1.187 (30.15)

0.054 (1.37)

RL-1256-4-470

470.0

0.114

9.2

7.2

1.125 (28.58)

0.048 (1.22)

RL-1256-4-560

560.0

0.125

8.3

7.2

1.125 (28.58)

0.048 (1.22)

RL-1256-4-680

680.0

0.139

7.6

7.2

1.125 (28.58)

0.048 (1.22)

RL-1256-4-820

820.0

0.154

6.8

7.2

1.187 (30.15)

0.048 (1.22)

RL-1256-4-1000

1000.0

0.216

6.2

5.5

1.062 (26.97)

0.043 (1.09)

RL-1256-4-1200

1200.0

0.232

5.7

5.5

1.156 (29.36)

0.043 (1.09)

RL-1256-4-1500

1500.0

0.324

5.1

4.5

1.156 (29.36)

0.039 (0.99)

RL-1256-4-1800

1800.0

0.360

4.6

4.5

1.156 (29.36)

0.039 (0.99)

RL-1256-4-2200

2200.0

0.494

4.2

4.0

1.062 (26.97)

0.033 (0.84)

RL-1256-4-2700

2700.0

0.555

3.8

4.0

1.062 (26.97)

0.033 (0.84)

RL-1256-4
Renco Part No.

RL-1256-4 TABLE CONTINUES ON FOLLOWING PAGE

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY
7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

RL-1256-4, RL-1256-5
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-4-3300

3300.0

0.773

3.4

2.8

1.062 (26.97)

0.031 (0.79)

RL-1256-4-3900

3900.0

0.845

3.1

2.8

1.125 (28.58)

0.031 (0.79)

RL-1256-4-4700

4700.0

1.14

2.9

2.0

1.11 (28.19)

0.028 (0.71)

RL-1256-4-5600

5600.0

1.60

2.5

2.0

1.11 (28.19)

0.028 (0.71)

RL-1256-4-6800

6800.0

1.76

2.3

1.6

1.11 (28.19)

0.025 (0.64)

RL-1256-4-8200

8200.0

1.95

2.0

1.6

1.16 (29.46)

0.025 (0.64)

RL-1256-4-10000

10000.0

2.76

1.8

1.3

1.16 (29.46)

0.022 (0.56)

RL-1256-4-12000

12000.0

3.04

1.7

1.3

1.16 (29.46)

0.022 (0.56)

RL-1256-4-15000

15000.0

3.39

1.5

1.3

1.16 (29.46)

0.022 (0.56)

Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-5-1.8

1.8

0.002

155.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-2.2

2.2

0.002

155.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-2.7

2.7

0.002

125.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-3.3

3.3

0.002

125.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-3.9

3.9

0.003

102.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-4.7

4.7

0.003

87.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-5.6

5.6

0.003

87.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-6.8

6.8

0.003

87.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-8.2

8.2

0.003

76.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-10

10.0

0.004

67.0

35.0

1.11 (28.19)

0.105 (2.67)

RL-1256-5-12

12.0

0.004

60.0

35.0

1.16 (29.46)

0.105 (2.67)

RL-1256-5-15

15.0

0.005

49.0

35.0

1.16 (29.46)

0.105 (2.67)

RL-1256-5-18

18.0

0.007

45.0

27.0

1.16 (29.46)

0.094 (2.39)

RL-1256-5-22

22.0

0.007

42.0

27.0

1.16 (29.46)

0.094 (2.39)

RL-1256-5-27

27.0

0.008

35.0

27.0

1.16 (29.46)

0.094 (2.39)

RL-1256-5-33

33.0

0.009

34.0

27.0

1.16 (29.46)

0.094 (2.39)

RL-1256-5-39

39.0

0.010

30.0

27.0

1.16 (29.46)

0.094 (2.39)

RL-1256-5-47

47.0

0.011

28.0

27.0

1.16 (29.46)

0.094 (2.39)

RL-1256-5-56

56.0

0.013

26.0

21.0

1.16 (29.46)

0.084 (2.13)

RL-1256-5-68

68.0

0.015

23.0

21.0

1.25 (31.75)

0.084 (2.13)

RL-1256-4
Renco Part No.

RL-1256-5
Renco Part No.

RL-1256-5 TABLE CONTINUES ON FOLLOWING PAGE

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

RL-1256-5
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-5-82

82.0

0.017

20.0

21.0

1.28 (32.51)

0.084 (2.13)

RL-1256-5-100

100.0

0.018

19.0

21.0

1.25 (31.75)

0.084 (2.13)

RL-1256-5-120

120.0

0.022

18.0

17.0

1.16 (29.46)

0.075 (1.90)

RL-1256-5-150

150.0

0.025

16.0

17.0

1.16 (29.46)

0.075 (1.90)

RL-1256-5-180

180.0

0.035

14.0

13.5

1.10 (27.94)

0.068 (1.72)

RL-1256-5-220

220.0

0.040

13.0

13.5

1.10 (27.94)

0.068 (1.72)

RL-1256-5-270

270.0

0.044

11.0

13.5

1.10 (27.94)

0.068 (1.72)

RL-1256-5-330

330.0

0.049

10.0

13.5

1.11 (28.19)

0.068 (1.72)

RL-1256-5-390

390.0

0.070

9.7

11.4

1.15 (29.21)

0.060 (1.52)

RL-1256-5-470

470.0

0.078

8.8

11.4

1.07 (27.18)

0.060 (1.52)

RL-1256-5-560

560.0

0.105

8.1

9.0

1.07 (27.18)

0.054 (1.37)

RL-1256-5-680

680.0

0.115

7.4

9.0

1.07 (27.18)

0.054 (1.37)

RL-1256-5-820

820.0

0.127

6.7

9.0

1.12 (28.45)

0.054 (1.37)

RL-1256-5-1000

1000.0

0.176

6.1

7.2

1.12 (28.45)

0.048 (1.22)

RL-1256-5-1200

1200.0

0.195

5.5

7.2

1.12 (28.45)

0.048 (1.22)

RL-1256-5-1500

1500.0

0.274

5.0

5.5

1.12 (28.45)

0.043 (1.09)

RL-1256-5-1800

1800.0

0.302

4.5

5.5

1.13 (28.70)

0.043 (1.09)

RL-1256-5-2200

2200.0

0.338

4.1

5.5

1.16 (29.46)

0.043 (1.09)

RL-1256-5-2700

2700.0

0.459

3.7

4.5

1.02 (25.91)

0.039 (0.99)

RL-1256-5-3300

3300.0

0.642

3.4

4.0

1.02 (25.91)

0.035 (0.89)

RL-1256-5-3900

3900.0

0.699

3.0

4.0

1.14 (28.96)

0.035 (0.89)

RL-1256-5-4700

4700.0

0.775

2.8

4.0

1.14 (28.96)

0.035 (0.89)

RL-1256-5-5600

5600.0

0.843

2.6

4.0

1.14 (28.96)

0.035 (0.89)

RL-1256-5-6800

6800.0

1.15

2.3

2.8

1.06 (26.92)

0.031 (0.79)

RL-1256-5-8200

8200.0

1.26

2.1

2.8

1.16 (29.46)

0.031 (0.79)

RL-1256-5-10000

10000.0

1.74

1.9

2.0

1.13 (28.70)

0.028 (0.71)

RL-1256-5-12000

12000.0

1.92

1.7

2.0

1.13 (28.70)

0.028 (0.71)

RL-1256-5-15000

15000.0

2.17

1.5

2.0

1.13 (28.70)

0.028 (0.71)

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

CHOKES

RL-1256-5
Renco Part No.

RL-1256-6
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-6-4.7

4.7

0.002

149.9

35.0

1.40 (35.56)

0.105 (2.67)

RL-1256-6-5.6

5.6

0.002

122.7

35.0

1.40 (35.56)

0.105 (2.67)

RL-1256-6-6.8

6.8

0.003

103.8

35.0

1.40 (35.56)

0.105 (2.67)

RL-1256-6-8.2

8.2

0.003

90.0

35.0

1.40 (35.56)

0.105 (2.67)

RL-1256-6-10

10.0

0.003

79.4

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-12

12.0

0.004

71.0

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-15

15.0

0.004

64.3

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-18

18.0

0.005

58.7

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-22

22.0

0.005

54.0

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-27

27.0

0.006

50.0

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-33

33.0

0.006

46.5

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-39

39.0

0.006

43.5

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-47

47.0

0.008

40.9

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-56

56.0

0.009

36.5

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-68

68.0

0.009

32.9

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-82

82.0

0.010

30.0

35.0

1.48 (37.59)

0.105 (2.67)

RL-1256-6-100

100.0

0.014

26.5

27.0

1.53 (38.86)

0.094 (2.39)

RL-1256-6-120

120.0

0.015

24.5

27.0

1.53 (38.86)

0.094 (2.39)

RL-1256-6-150

150.0

0.023

21.4

21.0

1.49 (37.85)

0.084 (2.13)

RL-1256-6-180

180.0

0.025

19.5

21.0

1.49 (37.85)

0.084 (2.13)

RL-1256-6-220

220.0

0.028

18.0

21.0

1.49 (37.85)

0.084 (2.13)

RL-1256-6-270

270.0

0.030

16.2

21.0

1.49 (37.85)

0.084 (2.13)

RL-1256-6-330

330.0

0.040

14.8

17.0

1.31 (33.27)

0.075 (1.90)

RL-1256-6-390

390.0

0.055

13.6

13.5

1.31 (33.27)

0.068 (1.73)

RL-1256-6-470

470.0

0.061

12.3

13.5

1.31 (33.27)

0.068 (1.73)

RL-1256-6-560

560.0

0.068

11.3

13.5

1.40 (33.56)

0.068 (1.73)

RL-1256-6-680

680.0

0.094

10.3

11.4

1.42 (36.07)

0.060 (1.52)

RL-1256-6-820

820.0

0.104

9.4

11.4

1.42 (36.07)

0.060 (1.52)

RL-1256-6
Renco Part No.

RL-1256-6 TABLE CONTINUES ON FOLLOWING PAGE

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

RL-1256-6, RL-1256-7
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-6-1000

1000.0

0.143

8.5

9.0

1.36 (34.54)

0.054 (1.37)

RL-1256-6-1200

1200.0

0.156

7.7

9.0

1.36 (34.54)

0.054 (1.37)

RL-1256-6-1500

1500.0

0.219

6.8

7.2

1.31 (33.27)

0.048 (1.22)

RL-1256-6-1800

1800.0

0.241

6.3

7.2

1.31 (33.27)

0.048 (1.22)

RL-1256-6-2200

2200.0

0.270

5.7

7.2

1.40 (35.56)

0.048 (1.22)

RL-1256-6-2700

2700.0

0.364

5.1

5.5

1.36 (34.54)

0.043 (1.09)

RL-1256-6-3300

3300.0

0.498

4.6

4.5

1.24 (31.50)

0.039 (0.99)

RL-1256-6-3900

3900.0

0.548

4.2

4.5

1.32 (33.53)

0.039 (0.99)

RL-1256-6-4700

4700.0

0.608

3.9

4.5

1.32 (33.53)

0.039 (0.99)

RL-1256-6-5600

5600.0

0.671

3.5

4.5

1.36 (34.54)

0.039 (0.99)

RL-1256-6-6800

6800.0

0.750

3.2

4.5

1.40 (33.56)

0.039 (0.99)

RL-1256-6-8200

8200.0

1.03

2.9

4.0

1.45 (36.83)

0.035 (0.89)

RL-1256-6-10000

10000.0

1.16

2.6

4.0

1.45 (36.83)

0.035 (0.89)

RL-1256-6-12000

12000.0

1.54

2.4

2.8

1.40 (35.56)

0.031 (0.79)

RL-1256-6-15000

15000.0

1.75

2.2

2.8

1.40 (35.56)

0.031 (0.79)

RL-1256-6-18000

18000.0

1.94

2.0

2.8

1.45 (36.83)

0.028 (0.71)

RL-1256-6-22000

22000.0

2.74

1.8

2.0

1.37 (34.80)

0.028 (0.71)

RL-1256-6-27000

27000.0

3.71

1.6

1.7

1.37 (34.80)

0.025 (0.64)

RL-1256-6-33000

33000.0

4.16

1.5

1.7

1.37 (34.80)

0.025 (0.64)

RL-1256-6-39000

39000.0

5.56

1.4

1.4

1.35 (34.29)

0.025 (0.64)

RL-1256-6-47000

47000.0

6.19

1.2

1.4

1.35 (34.29)

0.022 (0.56)

Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-7-5.6

5.60

0.0018

200.0

45.0

1.60 (40.64)

0.120 (3.05)

RL-1256-7-6.8

6.80

0.0021

163.0

45.0

1.60 (40.64)

0.120 (3.05)

RL-1256-7-8.2

8.20

0.0022

163.0

45.0

1.60 (40.64)

0.120 (3.05)

RL-1256-7-10

10.0

0.0024

138.0

45.0

1.60 (40.64)

0.120 (3.05)

RL-1256-7-12

12.0

0.0025

120.0

45.0

1.60 (40.64)

0.120 (3.05)

RL-1256-7-15

15.0

0.0028

105.0

42.0

1.70 (43.18)

0.120 (3.05)

RL-1256-7-18

18.0

0.0032

94.0

40.0

1.70 (43.18)

0.120 (3.05)

RL-1256-7-22

22.0

0.0036

85.0

38.0

1.70 (43.18)

0.120 (3.05)

RL-1256-6
Renco Part No.

RL-1256-7
Renco Part No.

RL-1256-7 TABLE CONTINUES ON FOLLOWING PAGE

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY
7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

RL-1256-7
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-7-27

27.0

0.0042

78.0

38.0

1.70 (43.18)

0.120 (3.05)

RL-1256-7-33

33.0

0.0045

72.0

37.0

1.70 (43.18)

0.120 (3.05)

RL-1256-7-39

39.0

0.0048

66.0

36.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-47

47.0

0.0057

58.0

35.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-56

56.0

0.0069

54.0

35.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-68

68.0

0.0078

48.0

35.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-82

82.0

0.0093

43.0

35.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-100

100.0

0.0103

40.0

27.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-120

120.0

0.0108

36.0

27.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-150

150.0

0.0120

32.0

25.0

1.80 (45.72)

0.120 (3.05)

RL-1256-7-180

180.0

0.0156

21.0

22.0

1.80 (45.72)

0.105 (2.67)

RL-1256-7-220

220.0

0.0168

28.0

22.0

1.80 (45.72)

0.105 (2.67)

RL-1256-7-270

270.0

0.0228

24.0

21.0

1.80 (45.72)

0.094 (2.39)

RL-1256-7-330

330.0

0.0300

23.0

17.0

1.80 (45.72)

0.084 (2.13)

RL-1256-7-390

390.0

0.0432

21.0

13.5

1.70 (43.18)

0.075 (1.90)

RL-1256-7-470

470.0

0.0456

19.7

13.5

1.70 (43.18)

0.075 (1.90)

RL-1256-7-560

560.0

0.0480

17.4

13.5

1.75 (44.45)

0.075 (1.90)

RL-1256-7-680

680.0

0.0516

15.9

12.0

1.80 (45.72)

0.075 (1.90)

RL-1256-7-820

820.0

0.0648

14.0

11.5

1.80 (45.72)

0.075 (1.90)

RL-1256-7-1000

1000.0

0.0936

12.7

10.0

1.75 (44.45)

0.068 (1.73)

RL-1256-7-1200

1200.0

0.1020

11.9

9.5

1.78 (45.21)

0.068 (1.73)

RL-1256-7-1500

1500.0

0.1176

10.9

8.0

1.80 (45.72)

0.068 (1.73)

RL-1256-7-1800

1800.0

0.1536

10.1

7.5

1.70 (43.18)

0.060 (1.52)

RL-1256-7-2200

2200.0

0.2160

8.9

7.2

1.70 (43.18)

0.054 (1.37)

RL-1256-7-2700

2700.0

0.2424

8.0

6.0

1.75 (44.45)

0.054 (1.37)

RL-1256-7-3300

3300.0

0.2640

7.1

5.5

1.80 (45.72)

0.054 (1.37)

RL-1256-7-3900

3900.0

0.3480

6.8

5.2

1.75 (44.45)

0.048 (1.22)

RL-1256-7-4700

4700.0

0.3924

6.1

5.0

1.78 (45.21)

0.048 (1.22)

RL-1256-7-5600

5600.0

0.4320

5.6

4.7

1.80 (45.72)

0.048 (1.22)

RL-1256-7-6800

6800.0

0.5940

5.0

4.5

1.70 (43.18)

0.043 (1.09)

RL-1256-7-8200

8200.0

0.6600

4.6

4.0

1.75 (44.45)

0.043 (1.09)

RL-1256-7-10000

10000.0

0.7560

4.0

4.0

1.80 (45.72)

0.043 (1.09)

RL-1256-7-12000

12000.0

0.9840

3.7

3.5

1.80 (45.72)

0.039 (0.99)

RL-1256-7
Renco Part No.

RL-1256-7 TABLE CONTINUES ON FOLLOWING PAGE

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

RL-1256-7, RL-1256-8
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-7-15000

15000.0

1.416

3.0

2.8

1.75 (44.45)

0.035 (0.89)

RL-1256-7-18000

18000.0

1.524

2.8

2.8

1.78 (45.21)

0.035 (0.89)

RL-1256-7-22000

22000.0

1.800

2.7

2.3

1.80 (45.72)

0.035 (0.89)

RL-1256-7-27000

27000.0

2.376

2.5

2.0

1.75 (44.45)

0.031 (0.79)

RL-1256-7-33000

33000.0

2.640

2.2

1.9

1.80 (45.72)

0.031 (0.79)

RL-1256-7-39000

39000.0

3.576

2.1

1.6

1.75 (44.45)

0.028 (0.71)

RL-1256-7-47000

47000.0

3.936

1.9

1.6

1.78 (45.21)

0.028 (0.71)

RL-1256-7-56000

56000.0

4.320

1.7

1.5

1.80 (45.72)

0.028 (0.71)

RL-1256-7-68000

68000.0

5.220

1.5

1.3

1.85 (46.99)

0.028 (0.71)

Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-8-5.6

5.6

0.0012

233.0

55.0

0.225 (5.72)

RL-1256-8-6.8

6.8

0.0013

197.0

55.0

0.225 (5.72)

RL-1256-8-8.2

8.2

0.0015

171.0

55.0

0.225 (5.72)

RL-1256-8-10

10.0

0.0017

170.0

55.0

0.225 (5.72)

RL-1256-8-12

12.0

0.0020

150.0

55.0

0.225 (5.72)

RL-1256-8-15

15.0

0.0021

135.0

55.0

0.225 (5.72)

RL-1256-8-18

18.0

0.0023

122.0

55.0

0.225 (5.72)

RL-1256-8-22

22.0

0.0025

111.0

55.0

0.225 (5.72)

RL-1256-8-27

27.0

0.0026

102.0

55.0

0.225 (5.72)

RL-1256-8-33

33.0

0.0029

95.0

55.0

0.225 (5.72)

RL-1256-8-39

39.0

0.0033

83.0

55.0

0.225 (5.72)

RL-1256-8-47

47.0

0.0035

77.0

55.0

0.225 (5.72)

RL-1256-8-56

56.0

0.0039

69.0

55.0

0.225 (5.72)

RL-1256-8-68

68.0

0.0043

62.0

50.0

0.225 (5.72)

RL-1256-8-82

82.0

0.0048

57.0

45.0

0.210 (5.33)

RL-1256-8-100

100.0

0.0052

52.0

40.0

0.210 (5.33)

RL-1256-8-120

120.0

0.0071

48.0

39.0

0.210 (5.33)

RL-1256-8-150

150.0

0.0079

43.0

38.0

0.210 (5.33)

RL-1256-8-180

180.0

0.0087

39.0

37.0

0.210 (5.33)

RL-1256-8-220

220.0

0.0120

35.0

33.0

0.190 (4.83)

RL-1256-7
Renco Part No.

RL-1256-8
Renco Part No.

RL-1256-8 TABLE CONTINUES ON FOLLOWING PAGE

* INDUCTORS WOUND WITH 2 STRANDS OF WIRE. CONSULT ENGINEERING FOR DIMENSION.
6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY
7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

RL-1256-8
Inductance
(H)

DCR
Max.
(Ohms)

Isat
(A)

Irms
(A)

Dimension E
Approx. Inches
(mm)

Pin
Dimension Approx.
Inches (mm)

RL-1256-8-270

270.0

0.014

32.0

30.0

0.190 (4.83)

RL-1256-8-330

330.0

0.018

29.0

27.0

1.80 (45.72)

0.120 (3.05)

RL-1256-8-390

390.0

0.020

27.0

25.0

1.70 (43.18)

0.120 (3.05)

RL-1256-8-470

470.0

0.028

24.0

21.0

1.70 (43.18)

0.105 (2.67)

RL-1256-8-560

560.0

0.031

22.0

20.0

1.75 (44.45)

0.105 (2.67)

RL-1256-8-680

680.0

0.034

20.0

19.0

1.80 (45.72)

0.105 (2.67)

RL-1256-8-820

820.0

0.047

18.0

16.0

1.80 (45.72)

0.094 (2.39)

RL-1256-8-1000

1000.0

0.052

16.0

15.5

1.75 (44.45)

0.094 (2.39)

RL-1256-8-1200

1200.0

0.057

15.0

15.0

1.78 (45.21)

0.094 (2.39)

RL-1256-8-1500

1500.0

0.080

13.0

13.0

1.80 (45.72)

0.084 (2.13)

RL-1256-8-1800

1800.0

0.088

12.0

12.0

1.70 (43.18)

0.084 (2.13)

RL-1256-8-2200

2200.0

0.122

11.0

10.0

1.70 (43.18)

0.075 (1.90)

RL-1256-8-2700

2700.0

0.135

10.0

10.0

1.75 (44.45)

0.075 (1.90)

RL-1256-8-3300

3300.0

0.188

9.0

8.0

1.80 (45.72)

0.068 (1.73)

RL-1256-8-3900

3900.0

0.205

8.0

8.0

1.75 (44.45)

0.068 (1.73)

RL-1256-8-4700

4700.0

0.283

7.7

6.7

1.78 (45.21)

0.060 (1.52)

RL-1256-8-5600

5600.0

0.309

7.0

6.4

1.80 (45.72)

0.060 (1.52)

RL-1256-8-6800

6800.0

0.431

6.4

5.4

1.70 (43.18)

0.054 (1.37)

RL-1256-8-8200

8200.0

0.472

5.8

5.2

1.75 (44.45)

0.054 (1.37)

RL-1256-8-10000

10000.0

0.521

5.2

5.0

1.80 (45.72)

0.054 (1.37)

RL-1256-8-12000

12000.0

0.717

4.8

4.2

1.80 (45.72)

0.048 (1.22)

RL-1256-8-15000

15000.0

0.803

4.3

4.0

1.75 (44.45)

0.048 (1.22)

RL-1256-8-18000

18000.0

1.111

3.9

3.4

1.78 (45.21)

0.043 (1.09)

RL-1256-8-22000

22000.0

1.228

3.5

3.2

1.80 (45.72)

0.043 (1.09)

RL-1256-8-27000

27000.0

1.716

3.2

2.7

1.75 (44.45)

0.039 (0.99)

RL-1256-8-33000

33000.0

1.896

2.9

2.6

1.80 (45.72)

0.039 (0.99)

RL-1256-8-39000

39000.0

2.590

2.6

2.3

1.75 (44.45)

0.035 (0.89)

RL-1256-8-47000

47000.0

2.840

2.4

2.2

1.78 (45.21)

0.035 (0.89)

RL-1256-8-56000

56000.0

3.104

2.2

2.1

1.80 (45.72)

0.035 (0.89)

RL-1256-8-68000

68000.0

4.331

2.0

1.7

1.85 (46.99)

0.031 (0.79)

RL-1256-8-82000

82000.0

4.756

1.8

1.6

1.90 (48.26)

0.031 (0.79)

RL-1256-8-100000

100000.0

6.652

1.6

1.4

1.95 (49.53)

0.028 (0.71)

RL-1256-8
Renco Part No.

* INDUCTORS WOUND WITH 2 STRANDS OF WIRE. CONSULT ENGINEERING FOR DIMENSION.

CHOKES

NOTES:
1. INDUCTANCE 10% TESTED AT 10 kHz , 0.1 Vrms, VALUES
BELOW 10H ARE 20%
2. 500 VOLTS DC HIPOT FOR 1 MINUTE (WINDING TO I.D. OF CORE)
3. ELECTRICAL SPECIFICATIONS MEASURED AT 25C
4. Isat - DC CURRENT THAT WILL CAUSE INDUCTANCE TO
DROP BY 5%
5. Irms - CURRENT THAT CAUSES THE TEMPERATURE TO
RISE APPROX. 40C ABOVE AMBIENT OF 25C

6. LEADS FOR PC MOUNTING TINNED TO WITHIN 1/16 OF BODY

7. PART FINISHED WITH 135C POLYOLEFIN SLEEVING THAT MEETS
UL-224 VW-1
8. ENCAPSULATED TO MIL-PRF-27 AVAILABLE, SEE
RENCO RL-1324 SERIES
9. CENTER HOLE FOR MECHANICAL MOUNTING
10. SPACER AVAILABLE AT ADDITIONAL COST TO
FACILITATE PC BOARD WASHING
11. NON-LISTED VALUES AVAILABLE ON REQUEST

RENCO ELECTRONICS INC.

595 International Place, Rockledge, FL 32955-4200 USA www.rencousa.com ISO 9001 Certied
Toll Free Engineering Hot Line: 800.645.5828 P: 321.637.1000 F: 321.637.1600