Scribd
Upload
17 views

Duty Application Iron Ore Slurry Type Slurry Pump

This document provides specifications for an iron ore slurry pump including: - The materials of construction for liners, impeller, shaft, casing and wear parts will be specified by the vendor. - The pump will be mounted horizontally with a v-belt drive arrangement. - A seal type will be used, with utility water flow rate and pressure specified by the vendor. - Piping sizes and flange classes will be 150 for discharge and suction. Additional details like impeller diameter and seal end plate connection will be specified by the vendor.

Uploaded by

HARIPRASAD
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
17 views

Duty Application Iron Ore Slurry Type Slurry Pump

This document provides specifications for an iron ore slurry pump including: - The materials of construction for liners, impeller, shaft, casing and wear parts will be specified by the vendor. - The pump will be mounted horizontally with a v-belt drive arrangement. - A seal type will be used, with utility water flow rate and pressure specified by the vendor. - Piping sizes and flange classes will be 150 for discharge and suction. Additional details like impeller diameter and seal end plate connection will be specified by the vendor.

Uploaded by

HARIPRASAD
Copyright
© © All Rights Reserved
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Duty Application

Type

Iron ore Slurry


Slurry pump

MATERIAL OF CONSTRUCTION
Liners
Impeller
Shaft
Pump Casing
Wear parts
MOUNTING ARRANGEMENT
Mounting
Drive Arrangement
SEALING TYPE
Seal Type
Utility water flow rate
Utility water feed Pressure
PIPING

Discharge
size/ ANS flange class 150
Suction
size/ ANS flange class 150
Impeller dia
Connection on seal end plate : sreawed/ welded
WEIGHTS (kgs)

Pump
Driver & acc.
Baseplate
Total

_
_
_
_

ACCESSOREIES AND MATERIALS

Base plate : combined/ separate


combined
Foundation bolts : yes/ no
yes
Coupling : make/ type
NA
Coupling Guard - non-sparking : yes/ no
NA
Vibration Equipment / connections : yes/no
NA
Motor/v-belt guard: yes/ no
yes
v-belt : yes/ no
yes
pulley: : yes/ no
yes
Note:
1) Vendor to indicate & complete the data sheet
2) Vendor to provide GA/outline dwgs for approval with pump curve & total weight of the p
3) Vendor to provide Intake/Discharge allowable flange loads
4) All pipng within the skid limit shall be inaccordance with ASME B31.3
5) All connections to the client facillities shall be locted at the skid edge
6) All package shall be supplied with pressure gauge on the suction line to monitor the suc
The skid shall be supplied on steel base plate complete with teflon wheel and steel han
7)

8) The package shall be supplied with a minimum weight and minimum dimension for only
9) The skid total weight shall be limited to single operator comfort lifting. The maximum to

Slurry
ump

by
by
by
by
by

vendor
vendor
vendor
vendor
vendor

horizontal
v-belt
by vendor
by vendor
by vendor
by
by
by
by

vendor
vendor
vendor
vendor

DIMENSIONS

Length
Width
Heigh

_
_
_

INSPECTION AND TESTS

Hydrostatic Test : yes/ no


Performance Test : yes/ no
NPSHR test : yes/ no
Sound Level test : yes/no
Auxilliary Equipment Test : yes/ no
Pump speed during performance test (rpm)
Performnce Test on water : capacity/ head/ power
Hydrostatic Test Pressure casing/ jacket/ pipng

weight of the pump

monitor the suction pressure


l and steel handle for easy mobilisation and dimension

mension for only single operator handling


he maximum total weight shall be less than 20kgs.

NO
YES
YES
YES
YES
YES
YES
YES

You might also like