0% found this document useful (0 votes)
441 views

Deckshield ID

Deckshield ID is a low VOC, flexible polyurethane coating system used to provide a colorful, watertight and hard-wearing surface for intermediate floors in parking structures. It enhances aesthetics, reduces noise, and makes parking structures brighter and safer. Benefits include being environmentally friendly, abrasion resistant, chemically resistant, fire resistant, slip resistant, and able to resist cracking. It has been used successfully in parking structures around the world.

Uploaded by

MinhHy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
441 views

Deckshield ID

Deckshield ID is a low VOC, flexible polyurethane coating system used to provide a colorful, watertight and hard-wearing surface for intermediate floors in parking structures. It enhances aesthetics, reduces noise, and makes parking structures brighter and safer. Benefits include being environmentally friendly, abrasion resistant, chemically resistant, fire resistant, slip resistant, and able to resist cracking. It has been used successfully in parking structures around the world.

Uploaded by

MinhHy
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Deckshield ID Intermediate Deck

Description
Deckshield ID is a Green Label certified, low
VOC, solvent free, flexible polyurethane car park
deck coating system providing a colourful
watertight, hard wearing surface for intermediate
decks of multi-storey, basement and other
trafficable suspended floors.
Uses
Deckshield cosmetically enhances and reduces
noise, making multi-storey car parks and
suspended floors brighter, safer environments to
visit. Deckshield is suitable for refurbishment of
existing car parks or new construction projects.
Benefits
Green Label certificated environmentally
friendly/low VOC paint
Aesthetically attractive brightens up dull,
dark, musty car parks and suspended floors
Reduces noise greatly reduces tyre squeal
Hard wearing abrasion resistant
Excellent chemical resistance to engine oil,
battery acid, hydraulic fluid, fuel, etc.
Fire resistant
Slip resistant
Resistant to hair line cracking
Excellent bond strength
Fast track installation
100% UV light stable non yellowing

Standard Colour Chart

Forest Green

Tile Red

Ocean Blue

Light Blue

Goosewing Grey

Mid Grey

Dark Grey

Black

The applied colours may differ slightly from the examples shown above.
Contact our customer services for a true colour sample or a special colour match.

Project References
Multi-storey car parks world-wide:-, Tropicana
City Mall, One KLCC Condominium, Malaysia;
Regence Royal, The Summit, Sky Horizon,
Sorrento, AIA , Hong Kong; Deira City Centre
Triangle, UAE; Orchard Central Shopping Mall,
Singapore.

System Design

089-032
Environmentally Friendly /
Low VOC Paint

www.flowcrete.com.my

Model Specification

Technical Information

Product: Deckshield ID system


Finish: Textured
Thickness: Dependant on specification
Colour: _______
Preparatory work and application in accordance
with manufacturers instructions.
Manufacturer: Flowcrete Asia Sdn. Bhd.
Telephone: Customer Service - +603 6277 9575

The figures that follow are typical properties achieved in


o
laboratory tests at 20 C and at 50% Relative Humidity.
Fire Resistance

BS476: Part 3: Designated


EXT.FF.AA

Slip Resistance

TRRL Pendulum Slip Test


Dry >40 Wet >40 (low slip
potential)

Substrate Requirements

Temperature Resistance

Concrete or screed substrate should be a minimum of 25


2
N/mm , free from laitance, dust and other contamination.
Substrate should be dry to 75% RH as per BS8204 and
free from rising damp and ground water pressure.

Softens over 70 oC,


Hardens on cooling

Water Permeability

Nil Karsten test (impermeable)

Chemical Resistance

Deckshield SF and fully blind with


Deckshield Quartz or Oxide
Deckshield Finish
Deckshield UV (WB)

Contact Technical Department.


Resistant to petrol, diesel,
antifreeze, hydraulic fluid, chlorides
and battery acids.

Resistance to chloride ions

Deckshield Finish and Deckshield UV (WB) are endorsed with


Green Label for the above standard colours. For non
standard colours, please consult Flowcrete Technical
Department.

DOT BD47/94: Appendix B,


Method B4,2(d).
Result: No chloride ion penetration
after 28 days

Abrasion Resistance

0.1g loss per 1000 cycles (ASTM D4060)


(1 kg load using CS17 wheels)

Products Included in this System

Note: Alternative specifications are available for steep


ramps and ramps with severe camber (please consult
Flowcrete for further advice).

Bond Strength

Greater than cohesive strength of


25 N/mm2 concrete. >1.5 MPa.

VOC Content

Very Low < 20 g/L (ISO11890-2)

Installation Service

UV Light Resistance

Excellent (Non-yellowing)

The installation should be carried out by a Flowcrete


approved applicator with a documented quality assurance
scheme. Obtain details of our approved contractors by
contacting our customer service team or enquiring via our
web site at www.flowcrete.com.my.

Speed of Cure

Environmental Considerations
The finished system is assessed as non-hazardous to
health and the environment. The long service life and
seamless surface reduce the need for repairs,
maintenance and cleaning. Environmental and health
considerations are controlled during manufacture and
application of the products by Flowcrete staff and fully
trained and experienced contractors.

Focus on the Floorzone


Flowcrete Asia Sdn Bhd is a division of the Flowcrete
Group, world leaders in specialist industrial and
commercial flooring. Systems available include: underfloor
heating systems, floor screeds, surface damp proof
membranes, decorative floor finishes, seamless terrazzo,
car park deck waterproofing and corrosion protection
systems to name just a few. Our corporate objective is
to satisfy your flooring needs.

Light traffic
Full traffic
Full chemical cure

10 oC
30 hrs
36 hrs
12days

20oC
18 hrs
48 hrs
7days

30oC
12 hrs
24 hrs
6days

Aftercare - Cleaning and Maintenance


Clean regularly using a single or double headed rotary
scrubber drier in conjunction with a mildly alkaline
detergent.

Important Note
Flowcretes products are guaranteed against defective
materials and manufacture and are sold subject to its
standard Terms and Conditions of Sale, copies of which
can be obtained on request.

Further Information
To ensure you are specifying a fit for purpose flooring for
your project please consult our Technical Advisors on the
number below or visit our website to register your interest
in specifying one of the most durable floors on the market.

Special corporate colours and designs can be produced to


special order.
Flowcrete Asia Sdn Bhd (366254-X)
The Flooring Technology Centre
Lot 37631 & 37632, Jalan 6/37A,
Taman Bukit Maluri,
Industrial Area Kepong,
52100 Kuala Lumpur, Malaysia.
Tel:
+(603) 6277 9575
Fax: +(603) 6277 4645
Email: [email protected]
Flowcrete Asia is an RPM company

Flowcrete Thailand
522/41, Baan klang Muang 1,
Soi Sahakarnpramoon,
Pracha-Uthit Road,
Wangthonglang, Bangkok, 10310.
Tel: (662) 2530 9611
Fax: (662) 2530 9610

Flowcrete Indonesia
2nd Floor, Suite 203,
Palma One Building,
Jl. HR Rasuna Said Kav. X2 No. 4
Jakarta Selatan 12950, Indonesia.
Tel:
+6221 252 3201
Fax:
+6221 252 0720

Flowcrete Vietnam
Representative Office
3rd Floor, 130 Nguyen Cong Tru Street,
Nguyen Thai Binh Ward,
District 1, HCMC, Vietnam
Tel: +848 3821 6561
Fax: +848 3821 6501

E-mail: [email protected]

E-mail: [email protected]

E-mail: [email protected]

2011.07.14 ASIA Rev 1.4

Flooring Design Service

www.flowcrete.com.my

You might also like