Models
Models
Valeroso
Grade 11 STEM-A
MODELS OF COMMUNICATION
Models of communication refers to the conceptual model used to explain the
human communication process. The first major model for communication came in 1949
by Claude Elwood Shannon and Warren Weaver for Bell Laboratories. Following the basic
concept, communication is the process of sending and receiving messages or
transferring information from one part (sender) to another (receiver).
Shannon and Weaver. The original model was designed to mirror the functioning of
radio and telephone technologies. Their initial model consisted of three primary
parts: sender, channel, and receiver. The sender was the part of a telephone a person
spoke into, the channel was the telephone itself, and the receiver was the part of the
phone where one could hear the other person. Shannon and Weaver also recognized
that often there is static that interferes with one listening to a telephone conversation,
which they deemed noise. The noise could also mean the absence of signal. In a simple
model, often referred to as the transmission model or standard view of
communication, information or content (e.g. a message in natural language) is sent in
some form (as spoken language) from an emisor/ sender/ encoder to a destination/
receiver/ decoder. This common conception of communication views communication as
a means of sending and receiving information. The strengths of this model are
simplicity, generality, and quantifiability. Social scientists Claude Shannon and Warren
Weaver structured this model based on the following elements: An information source,
which produces a message. A transmitter, which encodes the message into signals.
A channel, to which signals are adapted for transmission. A receiver, which 'decodes'
(reconstructs) the message from the signal. A destination, where the message
arrives. Shannon and Weaver argued that there were three levels of problems for
communication within this theory. The technical problem: how accurately can the
message be transmitted? The semantic problem: how precisely is the meaning
'conveyed'? The effectiveness problem: how effectively does the received meaning
affect behavior? Daniel Chandler critiques the transmission model by stating: It
assumes communicators are isolated individuals. No allowance for differing purposes.
No allowance for differing interpretations. No allowance for unequal power relations.
No allowance for situational contexts.
David Berlo. In 1960, David Berlo expanded on Shannon and Weavers (1949) linear
model of communication and created the SMCR Model of Communication. The SenderMessage-Channel-Receiver Model of communication separated the model into clear
parts and has been expanded upon by other scholars.
Linear Model. It is a one way model to communicate with others. It consists of the
sender encoding a message and channeling it to the receiver in the presence of noise.
Draw backs the linear model assumes that there is a clear cut beginning and end to
communication. It also displays no feedback from the receiver. For example; a letter,
email, text message, lecture.
Interactive Model. It is two linear models stacked on top of each other. The sender
channels a message to the receiver and the receiver then becomes the sender and
channels a message to the original sender. This model has added feedback, indicates
that communication is not a one way but a two way process. It also has field of
experience which includes our cultural background, ethnicity geographic location,
extend of travel, and general personal experiences accumulated over the course of
your lifetime. Draw backs there is feedback but it is not simultaneous. For example
instant messaging. The sender sends an IM to the receiver, then the original sender
has to wait for the IM from the original receiver to react. Or a question/answer session
where you just ask a question then you get an answer.
Communication cycle. The first major model for communication came in 1949 by
Claude Shannon and Warren Weaver for Bell Laboratories. The original model was
designed to mirror the functioning of radio and telephone technologies. Their initial
model consisted of three primary parts: sender, channel, and receiver. The sender was
the part of a telephone a person spoke into, the channel was the telephone itself, and
the receiver was the part of the phone where one could hear the other person.
Shannon and Weaver also recognized that often there is static that interferes with one
listening to a telephone conversation, which they deemed noise. In a simple model,
often referred to as the transmission model or standard view of communication,
information or content (e.g. a message in natural language) is sent in some form
(as spoken language) from an emisor/ sender/ encoder to a destination/
receiver/ decoder. This common conception of communication simply views
communication as a means of sending and receiving information. The strengths of this
model are simplicity, generality, and quantifiability. Social scientists Claude Shannon
and Warren Weaver structured this model based on the following elements: An
information source, which produces a message. A transmitter, which encodes the
message into signals. A channel, to which signals are adapted for transmission. A
receiver, which 'decodes' (reconstructs) the message from the signal. A destination,
where the message arrives. Shannon and Weaver argued that there were three levels
of problems for communication within this theory. The technical problem: how
accurately can the message be transmitted? The semantic problem: how precisely is
the meaning 'conveyed'? The effectiveness problem: how effectively does the received
meaning affect behavior? Daniel Chandler critiques the transmission model by stating:
It assumes communicators are isolated individuals. No allowance for differing
purposes. No allowance for differing interpretations. No allowance for unequal power
relations. No allowance for situational contexts.