Scribd
Upload
2K views4 pages

CIP Session I Quiz-3

This document contains a 25 question quiz about coatings inspection and application. The quiz covers topics such as the advantages of airless spray over conventional airspray, causes of dry spray, use of respiratory equipment, nondestructive testing instruments, magnetic DFT gauges, holiday detection, and abrasive water blasting. The key provided at the end lists the correct answers to each multiple choice question.

Uploaded by

munna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
2K views4 pages

CIP Session I Quiz-3

This document contains a 25 question quiz about coatings inspection and application. The quiz covers topics such as the advantages of airless spray over conventional airspray, causes of dry spray, use of respiratory equipment, nondestructive testing instruments, magnetic DFT gauges, holiday detection, and abrasive water blasting. The key provided at the end lists the correct answers to each multiple choice question.

Uploaded by

munna
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 4

CIP Session I Quiz 3

1.

Which of the following is an advantage of airless spray


compared to conventional airspray?
A)
B)
C)
D)

2.

Easily adjustable atomization air


Easily adjustable pattern width
Faster production rate
Equipment easier to clean

Arcing a spray gun may cause


I.
uneven application.
II. a spark hazard.
III. excessive overspray.
A)
B)
C)
D)

3.

With conventional airspray equipment, dry spray may be


caused by
A)
B)
C)
D)

4.

I only
III only
I and III only
II and III only

no air pressure at the gun.


plugged fluid tip.
atomization pressure too high.
too much thinner added during mixing.

If the inspector observes coatings or solvents being applied


to a surface, through an air hose, in an air spray system
he/she should
I.
look for other signs of poor practice.
II. notify the foreman.
III. check the air hose for softening or other
degradation.
A)
B)
C)
D)

5.

I only
I and II only
II and III only
I, II and III

Accidental injection through the skin by airless spray


A) can be attended to at the end of the work shift.
B) is a minor injury which does not require special
attention.
C) may be life threatening.
D) does not require a doctors attentions.

6.

Always ground the fluid hose used in airless spray to


A)
B)
C)
D)

Page1of4

improve atomization.
reduce friction
reduce viscosity
prevent static sparking.

08/04

CIP Session I Quiz 3

7.

The use of respiratory equipment is not necessary when spray


painting.
A) True
B) False

8.

Liquid coatings
A)
B)
C)
D)

9.

may be applied by brush,


must be applied by using
must be applied by using
must be applied by using

roller or spray.
conventional airspray.
airless spray.
air assisted airless spray.

The presence of oil or moisture in compressed air


A) is completely eliminated by moisture traps and oil
separators.
B) is not important during blow down operations.
C) should be periodically checked with a white blotter or
cloth.
D) is not a problem when using airspray.

10.

Conventional airspray guns have adjustments for


A)
B)
C)
D)

11.

Fluid pressure in a conventional airspray fluid line is


controlled by
A)
B)
C)
D)

12.

air pressure from compressor .


fan width and fluid flow.
size of the tip.
CFM of air required.

fluid outlet.
air pressure at the compressor.
adjusting the pot regulator.
squeezing the hose.

Generally, applicators do NOT need respirators when spray


painting.
A) True
B) False

13.

The paint inspection gauge (Tooke guage) is a destructive


test instrument.
A) True
B) False

14.

According to SSPC-PA2, always calibrate magnetic DFT (Type1) gauges


A) using a sample of bare steel treated in the same way as
the steel.
B) using shims of a known thickness.
C) as defined by the manufacturers instructions or the
specification.

Page2of4

08/04

CIP Session I Quiz 3

D) using plastic shims.

15.

According to NACE RP0188-99, the search electrode of a high


voltage holiday detector should be moved across the surface
at approximately
A)
B)
C)
D)

16.

second
second
second
second

with
with
with
with

a single pass.
a single pass.
double pass.
a double pass.

Paint inspection (Tooke) gauge


Wet sponge type instrument
Surface microscope
Magnifying glass.

damage the coating on which they are used.


do not destroy the coating on which they are used.
are used for laboratory testing only.
are not used in failure analysis.

High-volatge DC holiday detector are used to test


A)
B)
C)
D)

19.

per
per
per
per

Nondestructive test instruments, properly used


A)
B)
C)
D)

18.

meter (3.3 feet)


foot (0.3 meter)
foot (0.3 meter)
meter (3.3 feet)

Check holidays using a


A)
B)
C)
D)

17.

one
one
one
one

non magnetic coatings applied to magnetic substrates.


conductive coatings applied to nonconductive substrates.
magnetic coatings applied to non magnetic substrates.
Non conductive coatings applied to conductive substrates.

All magnetic DFT instrument magnets or probes must be held


at a right angle to the painted surface to produce valid
measurements.
A) True
B) False

20.

Which of the following are the principle advantages of


abrasive-injected water blast over water washing?
I.
Increased profile.
II. Increased production.
III. Reduced pressure
A)
B)
C)
D)

Page3of4

I only
I and II only
II and III only
I, II and III

08/04

CIP Session I Quiz 3

21.

Depth of anchor pattern/surface profile will not affect DFT


readings
A) True
B) False

22.

Air temperature has no effect upon relative humidity


A) True
B) False

23.

Magnetic DFT instruments


A)
B)
C)
D)

24.

be used on non-ferrous substrates.


affected by vibration.
affected by air temperature.
affected by substrate.

Always ground low-voltage DC holiday detector to


A)
B)
C)
D)

25.

can
are
are
are

the operator.
the scaffold.
the substrate being tested.
a coated area on the structure.

There is no spark hazard associated wit holiday test


equipment.
A) True
B) False

KEY
1-C, 2-C, 3-C, 4-C, 5-C, 6-D, 7-B, 8-A, 9-C, 10-B, 11-C, 12-B, 13-A,
14-C, 15-B, 16-B, 17-B, 18-D, 19-A, 20-B, 21-B, 22-B, 23-B, 24-C,
25-B.

Page4of4

08/04

You might also like