808
DSP/FPGA
Lab-808: Power Electronic Systems & Chips Lab., NCTU, Taiwan
http://pemclab.cn.nctu.edu.tw/
SmartPowerProcessingforEnergySaving
201111
Lab808:
Power Electronic Systems & Chips, NCTU, TAIWAN
LAB808
NCTU
1/21
System design and implementation for the optimization of
power electronic converting systems.
Top-Down Design Approach
Design Procedure
Design Equation & Design Curves
(MathCAD)
Computer Simulation (PSIM, Simulink)
Power Supplies
Servo Drives
Sensorless Inverter Drives
Control Performance
Efficiency
Cost Reduction
Size Reduction
Power Circuit Design
Control Electronics
Control Firmware
Practical Considerations
2/21
Text Book
Power Electronics: Converters,
Applications and Design,
N. Mohan, T. M. Undeland, and W. P.
Robbins,
John Wiley & Sons, 3rd Ed., 2002.
Ned Mohan
T. M. Undeland
W. P. Robbins
This book uniquely caters to the need of the university
curriculum. There is hardly any book in power electronics that
can compete with it. The large, 802-page second edition of
the book is essentially an enhanced and enlarged version of
the first edition, which was published in 1989. It offers
comprehensive coverage of traditional and state-of the-art
converter technologies, and a wide review of power
semiconductor devices.
The book is divided into seven parts and 30 chapters. It starts
with a review of basic power electronic systems and
applications, and after a brief introduction of the power
devices, electric and magnetic circuits, and computer
simulation principles, it deals with generic power electronic
circuits, which include diode rectifiers, phase-controlled
converters, switching mode power supplies, self-commutated
inverters, and resonant link converters. Then it gives a brief
and introductory treatment of DC and AC motor drives. After
reviewing some applications of power electronics, theory of
power devices, such as power diode, BJT, power MOSFET,
thyristor, GTO, and IGBT, it ends with a discussion of
converter design considerations.
3/21
Course Contents
1. (Introduction)
2. (Power Semiconductor Devices)
3. (Fundamental Theory)
4. (CAD for Power Electronics)
5. (Power Electronic Converters)
6. /-I (Uncontrolled AC/DC Converters)
7. /-II (Phase-Controlled AC/DC Converters)
8. / (DC/DC Converters)
9. / (PWM Inverters)
10. (Resonant Converters)
11. (SPS Design)
12. (UPS Design)
13. (Utility Interface and PFC Control)
14. (Flyback Converters)
15. (Design of Magnetic Components)
16. (Snubber Circuit Design)
17. (Thermal Design)
18. (EMC Design)
~
4/21
Book Contents
PART 1: INTRODUCTION
PART 2. GENERIC POWER ELECTRONIC CIRCUITS
PART 3. POWER SUPPLY APPLICATIONS
PART 4. MOTOR DRIVE APPLICATIONS
PART 5. OTHER APPLICATIONS
PART 6. SEMICONDUCTOR DEVICES
PART 7. PRACTICAL CONVERTER DESIGN CONSIDERATIONS
5/21
1. INTRODUCTION
Chapter 1. Power Electronic Systems
Chapter 2. Overview of Power Semiconductor Switches
Chapter 3. Review of Basic Electrical and Magnetic Circuit
Concepts
Chapter 4. Computer Simulation of Power Electronic Converters
and Systems
6/21
2. GENERIC POWER ELECTRONIC CIRCUITS
Chapter 5. Line-Frequency Diode Rectifiers: Line-Frequency ac
Uncontrolled dc
Chapter 6. Line-Frequency Phase-Controlled Rectifiers and
Inverters: Line-Frequency ac Controlled dc
Chapter 7. dc-dc Switch-Mode Converters
Chapter 8. Switch-Mode dc-ac Inverters: dc Sinusoidal ac
Chapter 9. Resonant Converters: Zero-Voltage and/or ZeroCurrent Switchings
7/21
3. POWER SUPPLY APPLICATIONS
Chapter 10. Switching DC Power Supplies
Chapter 11. Power Conditioners and UPS
Chapter xx. Battery Chargers
Chapter xx. Power Adapter for Notebook PC
Chapter xx. Power Supplies for Home Appliances
Chapter xx. Power Supplies for Telecom and Servers
8/21
4. MOTOR DRIVE APPLICATIONS
Chapter 12. Introduction to Motor Drives
Chapter 13. DC Motor Drives
Chapter 14. Induction Motor Drives
Chapter 15. Synchronous Motor Drives
9/21
5. OTHER APPLICATIONS
Chapter 16. Residential and Industrial Applications
Chapter 17. Electric Utility Applications
Chapter 18. Optimizing the Utility Interface with Power
Electronic Systems
Chapter xx. Power Converters for Renewable Energy
10/21
6. SEMICONDUCTOR DEVICES
Chapter 19. Basic Semiconductor Physics
Chapter 20. Power Diodes
Chapter 21. Bipolar Junction Transistors
Chapter 22. Power MOSFETs
Chapter 23. Thyristors
Chapter 24. Gate Turn-Off Thyristors
Chapter 25. Insulated Gate Bipolar Transistors
Chapter 26. Emerging Devices and Circuits
11/21
7. PRACTICAL DESIGN CONSIDERATIONS
Chapter 27. Snubber Circuits
Chapter 28. Gate and Base Drive Circuits
Chapter 29. Component Temperature Control and Heat Sinks
Chapter 30. Design of Magnetic Components
Chapter xx: Noise Reduction Techniques
Chapter xx: PCB Design for EMC Compliance
12/21
Extended Readings
Fundamentals of Power Electronics,
Robert W. Erickson and Dragan Maksimovic,
Kluwer Academic Publishers,
2nd Ed., February 2001.
Philip T. Krein,
Elements of Power Electronics,
Oxford University Press, February 1998.
Power Electronic Circuits,
Issa Batarseh, John Wiley &Sons, June 2003.
Fundamentals of Power
Electronics with MATLAB
Randall Shaffer, Charles River
Media, 1st Ed., Aug. 2006.
MathCAD(),
, ,
20080225.
Switch-Mode Power Supplies SPICE Simulations and
Practical Designs, Christophe
Basso, McGraw-Hill, Feb. 1,
2008.
Principles of Power Electronics,
J. G. Kassakian, M. F. Schlecht, G. C. Verghese, and M. F. Schlecht,
Addison-Wesley Pub Co, July 1991.;
~
13/21
Book Review
Fundamentals of Power Electronics,
Robert W. Erickson and Dragan Maksimovic,
Kluwer Academic Publishers,
2nd Ed., February 2001.
S. CukR. D. MiddlebrookProf. Cuk
Cuk ConverterProf. Middlebrook1976PESC
900
Robert W. Erickson,
Professor, Electrical and
Computer Engineering,
University of Colorado,
Boulder
~
Dragan Maksimovic,
Professor, Electrical and
Computer Engineering,
University of Colorado, Boulder
14/21
Power Electronics: A Learning Approach
Switching Power Supply
Design, Edited by: Abraham
I. Pressman McGraw Hill,
2nd Ed., Nov. 1997.
Control of Electrical
Drives, Werner Leonhard,
Springer Verlag, 3rd Ed.,
Jan. 2001.
Switch-Mode Power Supplies
- SPICE Simulations and
Practical Designs, Christophe
Basso, McGraw-Hill, Feb. 1,
2008.
Vector Control and
Dynamics of AC Drives, D.
W. Novotny and T. A. Lipo,
Clarendon Pr, USA.,
September 1996.
Power Electronics: Converters, Applications and
Design, N. Mohan, T. M. Undeland, and W. P.
Robbins, John Wiley & Sons, 3rd Ed., 2002.
Fast Analytical Techniques for
Electrical and Electronic Circuits,
V. Vorperian, Cambridge Press,
2004.
Advanced Engineering
Mathematics, Erwin
Kreyszig, John Wiley, 9th
Ed., Nov. 2005.
High-Power Converters and AC
Drives, Bin Wu (), WileyIEEE Press, 2006.
Renewable and Efficient
Electric Power Systems,
Gilbert M. Masters, Wiley-IEEE
Press, August 2004.
Grid Integration of Wind
Energy Conversion Systems,
Siegfried Heier, John Wiley,
2ed. 2006.
Electrical Energy Conversion
and Transport: An Interactive
Computer-Based Approach,
Dr. George, G. Karady, Dr.
Keith, and E. Holbert, WileyIEEE Press, December 2004.
Fundamentals of Power Electronics,
Robert W. Erickson and Dragan Maksimovic,
Kluwer Academic Publishers, 2nd Ed., February 2001.
Automatic Control Systems,
Benjamin C. Kuo and Farid
Golnaraghi, Wiley Text Books,
8th Ed., Aug. 2002.
Feedback Networks: Theory and
Circuit Applications, John
Choma and Wai-Kai Chen, World
Scientific Publishing, 2007.
Fundamentals of Physics, David
Halliday, Robert Resnick, and Jearl
Walker, John Wiley, 6th Ed., June 30,
2000.
Power Electronics Technology DVD
16/21
MathCAD http://www.mathcad.com/
MathCAD combines some of the best features of spreadsheets (like MS
Excel) and symbolic math programs. It provides a very good graphical user
interface and can be used to efficiently manipulate large data arrays,
perform symbolic calculations and easily construct graphs.
One of the quite useful features in MathCAD is its ability to perform
calculations with units; this is indeed an important feature for the design
engineers.
MATLAB/SIMULINK requires more time and previous knowledge than
the others and Mathcad is the easiest one to learn and use.
Electrical simulators (MATLAB/SIMULINK, PSPICE and PSIM) are
more flexible and allow more complex circuit analysis.
Mathcad provides the most friendly user environment.
Mathcad is a CAD tool very useful for its professional life and selflearning.
Sanz, M.; Lazaro, A.; Fernandez, C.; Zumel, P.; Barrado, A.; Olias, E.; Improvement of power electronics education with an interactive
electronic book based on Mathcad, IEEE Workshop on Power Electronics Education, pp. 129- 134, June 16-17, 2005.
Switching Power Supply Design: DCM Mode Flyback Converter, Switching Power Supply Design: CCM Mode Flyback Converter, National
Semiconductor: NS MathCAD Example, Michele Sclocchi, 2002.
17/21
Matlab-Simulink in Drives and Power Electronics
Fundamentals of Power Electronics with MATLAB
Randall Shaffer, Charles River Media, 1 Ed., August 11, 200).
Dynamic Simulation of Electric Machinery: Using MATLAB/Simulink,
Chee-Mun Ong, Prentice Hall, 1998.
~
18/21
PSIM http://www.powersimtech.com/
KEY FEATURES:
Friendly user interface; Simple to use, and fast
simulation
Interactive simulation environment
Magnetics modeling
Loss calculation and thermal analysis
Comprehensive motor drive library
Powerful control simulation capability
Support of custom C code and DLL
Link with Matlab/Simulink and finite element
analysis software
Powersim Technologies Inc.
#8590 - 142 St.
Surrey, B.C.
Canada V3W OS3
TEL: (215) 361-1137
FAX: (215) 361-2123
Email: [email protected]
web site: http://www.powersimtech.com
~
19/21
The Approach to Power Electronics
Buck
Power Electronics from System to Device
Feedback Networks: Theory and Circuit Applications
John Choma and Wai-Kai Chen,
World Scientific Publishing Co., Ltd. 2007.
Power Electronics: Converters, Applications and Design,
N. Mohan, T. M. Undeland, and W. P. Robbins, John Wiley & Sons, 2002.
Switching Power Supply Design & Optimization,
Sanjaya Maniktala, McGraw Hill, May 2004.
Smart Power ICs: Technologies and Applications,
2nd Ed., Bruno Murari, Franco Bertotti, and
Guiovanni A. Vignola, Springer, 2002.
Automatic Control Systems,
Benjamin C. Kuo and Farid
Golnaraghi, Wiley Text Books,
8th Ed., Aug. 2002.
Advanced Engineering Mathematics
Erwin Kreyszig,
John Wiley, 9th Ed., Nov. 2005.
Fundamentals of Power Semiconductor Devices,
B. Jayant Baliga, Springer, 1st Ed., May 2008.
CMOS Mixed-Signal Circuit Design,
R. Jacob Baker, John Wiley & Sons, May 2002.
Analysis and Design of Analog Integrated Circuits,
Paul R. Gray, Paul J. Hurst, Stephen H. Lewis,
Robert G. Meyer, Wiley, 4th Ed., Feb. 15, 2001.
Microelectronic Circuits,
A. S. Sedra and K. C. Smith,
revised Ed., 2007.
Digital Integrated Circuits A Design
Perspective, Jan M. Rabaey, Anantha
Chandrakasan, and Borivoje Nikolic,
Prentice Hall, 2nd Ed., Dec. 24, 2002.
