Scribd
Upload
93 views

LAB1 Introduction To Vector and Raster

This document is an introduction to raster grids and vector map elements. It contains tasks to explore how raster data is organized into a grid network with elevation values assigned to each node. Students create a digital elevation model for an area of a topographic map. They also examine vector map features represented as points, lines, polygons and determine which type each feature on a sample map represents. The document compares how raster and vector formats store spatial data and represents some map features in both formats.

Uploaded by

Tan Chee Wee
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
93 views

LAB1 Introduction To Vector and Raster

This document is an introduction to raster grids and vector map elements. It contains tasks to explore how raster data is organized into a grid network with elevation values assigned to each node. Students create a digital elevation model for an area of a topographic map. They also examine vector map features represented as points, lines, polygons and determine which type each feature on a sample map represents. The document compares how raster and vector formats store spatial data and represents some map features in both formats.

Uploaded by

Tan Chee Wee
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 12

SGHU 4133

TOPOGRAPHIC MAPPING USING


REMOTELY SENSED DATA

LAB. 1
INTRODUCTION TO RASTER GRIDS
AND VECTOR MAP ELEMENTS

STUDENT
NAME

DATE

LECTURER : Sr. SAMSUDIN AHMAD


Department of Geoinformation

Academic Session 2015/2016

Lab. 1

Page |

Lab. 1 Introduction to Raster Grids and


Vector Map Elements
Purpose: To explore the raster grid and vector map element
concepts.

PART A. RASTER GRID NETWORKS


Task A-1.

Examine the attached topographic map (Figure 1). The


contour lines are displayed with UTM Northing and Easting coordinates.
Answer the following preliminary questions.

1-1.

What is the contour interval of the topographic


map? (Assume that elevation units are in meter
AMSL)

1-2.

The UTM Coordinate system is in what unit of


distance measurement?

1-3.

Determine the UTM coordinates for the following point locations:


X (Easting)
meters

Y (Northing)
meters

Point A
Point B
1-4.

Determine the following map boundaries relative to the UTM Easting


/ Northing coordinate system (fill in the chart below).
Maximum X (Easting) coordinate of map
Minimum X (Easting) coordinate of map
Maximum Y (Northing) coordinate of map
Minimum Y (Northing) coordinate of map
Total X unit distance displayed on map
Total Y unit distance displayed on map

1-5.

Observe the grid overlay on the topographic map. Where each of

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1

Page |

the grid lines intersects, this point is referred to as a "node".


Determine the following:
How many total rows of grid lines do you observe
on the map?
How many total columns of grid lines do you
observe on the map?
Divide the total X unit distance (from 1-2) by the
number of columns
Divide the total Y unit distance (from 1-2) by the
number of rows
What is the X unit distance covered between each
node?
What is the Y unit distance covered between each
node?
Are the nodes distributed on a perfectly square or
rectangular grid network?
1-6

Consider a hypothetical example (not related to the attached


figure). Assume the following map coordinate relationships:
Maximum X (Easting) coordinate of map 15,000 m
Minimum X (Easting) coordinate of map 13,000 m
Maximum Y (Northing) coordinate of map 8000 m
Minimum Y (Northing) coordinate of map 6500 m
Your goal is to create a "10 m" grid for this hypothetical map (i.e. 10
m between each grid node).
What is the total X distance covered on the map?
What is the total Y distance covered on the map?
How many grid line rows do you need to specify?
How many grid line columns do you need to
specify?

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1

Page |

Task A-2. Raster

data in geographic information systems is basically a


grid network of data, with X,Y node coordinates and a "Z" value (i.e. some
attribute) attached to each node point. In the case of "digital elevation
models" (also known as DEM's), the "Z" attribute value is elevation relative
to sea level. Your task here is to create a digital elevation model (gridded
elevation data) for the area selected on the Figure 1, as outlined with the
dark rectangle in the center. The selected nodes are highlighted with a
heavy "dot".
Assume that the first row and first column of the grid starts in the lower
left hand corner (i.e. the southeast corner of the marked grid). This point is
marked as "grid origin" on the map. This is analogous to a Cartesian
coordinate system used in mathematical graphing. Fill in the following
charts:
Easting
Coordinates

Northing
Coordinates

Column 1

Row 1

Column 2

Row 2

Column 3

Row 3

Column 4

Row 4

Column 5

Row 5

Column 6
Column 7

Gridded Elevation Data (fill in the elevations for each node on the grid,
interpolate elevations as needed)

Columns
Row

1
2
3
4

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1

Page |

Concluding Statement to Part A. Raster Grids


You now have an understanding of how raster grid data is created and
stored in Geographic Information Systems. The study area is divided into a
mesh of grid cells, with each node attached to some attribute information
(i.e. "Z" values). Each cell is given a numeric identifier or value. Raster
systems are good for representing data over continuous space, examples
include:

o
o
o
o

Digital pictures or images (each cell is assigned a color value, here a


cell is called a "pixel")
Digital Elevation Models (each cell is assigned an elevation)
Rainfall Maps (each cell is assigned a rainfall value - inches of
precipitation accumulated over time)
Vegetation maps (each cell is assigned a vegetative index number)

Last Question: Think up three examples of spatial map data, other than
the examples listed above that could employ digital raster techniques.

Idea 1
Idea 2
Idea 3

PART B. VECTOR MAP REPRESENTATION


Vector map elements represent map data as a collection of points, lines,
and polygons. Below are geometric definitions of each as related to digital
map elements (see Figure 2 for Examples).

o
o
o

Points - individual points in map space represented by a very


specific X, Y coordinate.
Straight Line Segments - straight lines that connect any two points
(represented by two pairs of X,Y coordinates).
Polylines - lines with multiple segments of differing orientation
(multiple sets of X,Y coordinates)

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1
o

Page |

Polygons - regular to irregularly shaped polyline sets that


completely close on themselves (i.e. the end point of the polyline
exactly matches the origination point of the polyline).

**A Side Note: In the case of the vector approach to map elements, two
software files are required: (1) a vector graphics file with the geometric
coordinates and map element types. Here the map element is assigned an
internal code, and (2) a database information file that links attributes to
the internal code of the map elements.
This is different than the raster grid data structure above, in which all data
can easily be stored in one data file. Hence, vector map layers usually
require multiple data files to manage the same information that one raster
data file represents.**
Examine Figure 2A for a comparison of polygon map elements
represented in a vector vs. raster data structure.

Task B-1.

Refer to Figure 3. This is a map grid in UTM-meters, with


several digital map features listed A through E. Identify which type of map
element is represented by each feature in the table below (point, line,
polyline, or polygon).
Feature Map Element Type
A
B
C
D
E

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1

Page |

Task B-2.

Build a vector data file for each map feature (A through


E) in the table below.
Feature

Node Coordinates
X coordinate

Y coordinate

A
B
C
node 1
node 2
D
node 1
node 2

Questions:
Which data type do
you think requires
more
computer
storage memory and
processing
time,
vector
or
raster?
Why?

node 3
node 4
node 5
node 6
node 7
node 8
node 9
node 10

Which spatial data


type is also used in
digital image files
that are found on the
internet (like *.tif, or
*.jpg).

node 11
E
node 1
node 2
node 3
node 4
node 5

Compare feature D
to feature E in terms
of data structure.
What is the primary

difference between the two feature types?

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1

Page |

Using a red colored box (or any other color of your choosing), convert
vector map elements A through E to "Raster map elements". Using the
grid network shown on Figure 3, color in the raster version of each of the
elements (hint: refer to Figure 2A for some ideas).

SGHU 4133 Topographic Mapping Using Remotely Sensed Data

Lab. 1

Page | 9

-9-

Lab. 1

P a g e | 10

- 10 -

Lab. 1

P a g e | 11

- 11 -

Lab. 1

P a g e | 12

- 12 -

You might also like