Scribd
Upload
329 views

Structured Light

1) Structured light 3D scanning works by projecting a temporally multiplexed binary image sequence and using triangulation to determine the 3D position of each pixel based on its correspondence between the camera and projected images. 2) Both binary and gray codes are used to encode the projected images, with gray codes providing better performance. 3) Camera and projector calibration is performed to determine the intrinsic and extrinsic parameters of each device using a calibration pattern, with distortions modeled using a 4th order polynomial model.

Uploaded by

KopkoH
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
329 views

Structured Light

1) Structured light 3D scanning works by projecting a temporally multiplexed binary image sequence and using triangulation to determine the 3D position of each pixel based on its correspondence between the camera and projected images. 2) Both binary and gray codes are used to encode the projected images, with gray codes providing better performance. 3) Camera and projector calibration is performed to determine the intrinsic and extrinsic parameters of each device using a calibration pattern, with distortions modeled using a 4th order polynomial model.

Uploaded by

KopkoH
Copyright
© Attribution Non-Commercial (BY-NC)
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 10

Structured Light for 3D Scanning

Implementation Details

Douglas Lanman
EN 292-34: 3D Photography
May 15, 2007

1
Gray Code Structured Lighting

Point Grey Flea2


(15 Hz @ 1024 x 768)

Mitsubishi XD300U
(50-85 Hz @ 1024 x 768)

3D Reconstruction using Structured Light [Inokuchi 1984]


„ Recover 3D depth for each pixel using ray-plane intersection
„ Determine correspondence between camera pixels and projector planes by
projecting a temporally-multiplexed binary image sequence
„ Each image is a bit-plane of the Gray code for each projector row/column

Structured Light for 3D Scanning References: [1,2] 2


Gray Code Structured Lighting

Binary Image Sequence


„ Each image is a bit-plane of the binary code for each projector row/column
„ Minimum of 10 images to encode 1024 columns or 768 rows
„ In practice, 20 images are used to encode 1024 columns or 768 rows
„ Projector/camera(s) must be roughly synchronized

Structured Light for 3D Scanning References: [1,2] 3


Gray Code Structured Lighting

Gray Code Image Sequence


Bin2Gray(B,G)
„ Each image is a bit-plane of the Gray
code for each projector row/column 1 G←B
„ Requires same number of images as 2 for i ← n-1 downto 0
a binary image sequence, but has 3 G[i] ← B[i+1] xor B[i]
better performance in practice

Structured Light for 3D Scanning References: [1,2] 4


Gray Code Structured Lighting

Recovered Rows Recovered Columns


3D Reconstruction using Structured Light [Inokuchi 1984]
„ Our implementation uses a total of 42 images
(2 to measure dynamic range, 20 to encode rows, 20 to encode columns)
„ Individual bits assigned by detecting if bit-plane (or its inverse) is brighter
„ Decoding algorithm: Gray code Æ binary code Æ integer row/column index

Structured Light for 3D Scanning References: [1,2] 5


Overview of Projector-Camera Calibration

2
2
4
7

1
3

3
1

6
5

2
1
1
2
4
3
5
6

2
2
4

1
3
Estimated Camera Lens Distortion
Camera Calibration Procedure
„ Uses the Camera Calibration Toolbox for Matlab by J.-Y. Bouguet
Normalized Ray Distorted Ray (4th-order radial + tangential) Predicted Image-plane Projection

Structured Light for 3D Scanning References: [4,5,6] 6


Overview of Projector-Camera Calibration
4.5 4 3.5 .5
3 3 3.5 44
2.5 2.5
3 2 2 3
2.5 1 .5 1. 5
2
1 1 2
1. 5
5 1.
1
0.5 0.5

1
0.5
0.5
Estimated Projector Lens Distortion
Projector Calibration Procedure
„ Consider projector as an inverse camera (i.e., maps intensities to 3D rays)
„ Observe a calibration board with a set of fidicials in known locations
„ Use fidicials to recover calibration plane in camera coordinate system
„ Project a checkerboard on calibration board and detect corners
„ Apply ray-plane intersection to recover 3D position for each projected corner
„ Use Camera Calibration Toolbox to recover intrinsic/extrinsic projector
calibration using 2D→3D correspondences with 4th-order radial distortion

Structured Light for 3D Scanning References: [4,5,6] 7


Overview of Projector-Camera Calibration

Zc2 Xc2
Zc1

Yc (mm)
Zp Oc2
0 Oc1 1500
Xc1 Op Xp
200
Yp Yc2 1000
400 Yc1
Zc (mm)
0 500
500
Xc (mm) 1000 0

Projector-Camera Calibration Results


„ Implemented complete toolbox for projector-camera calibration
„ Sufficient accuracy for structured lighting applications
„ Future version will incorporate final global bundle adjustment

Structured Light for 3D Scanning References: [4,5,6] 8


Gray Code Structured Lighting: Results

Structured Light for 3D Scanning 9


References
3D Reconstruction using Structured Light
1. J. Salvi, J. Pages, and J. Batlle. Pattern Codification Strategies in Structured Light Systems.
Pattern Recognition, April 2004.
2. S. Inokuchi, K. Sato, and F. Matsuda. Range Imaging System for 3D Object Recognition.
Proceedings of the International Conference on Pattern Recognition, 1984.

Projector and Camera Calibration Methods


3. R. Legarda-Sáenz, T. Bothe, and W. P. Jüptner. Accurate Procedure for the Calibration of a
Structured Light System. Optical Engineering, 2004.
4. R. Raskar and P. Beardsley. A Self-correcting Projector. CVPR 2001.
5. S. Zhang and P. S. Huang. Novel Method for Structured Light System Calibration. Optical
Engineering, 2006.
6. J.-Y. Bouguet. Complete Camera Calibration Toolbox for Matlab.
http://www.vision.caltech.edu/bouguetj/calib_doc.

Visual Hull: Silhouette-based 3D Reconstruction


7. A. Laurentini. The Visual Hull Concept for Silhouette-based Image Understanding. IEEE
Transactions on Pattern Analysis and Machine Intelligence, 1994.

Structured Light for 3D Scanning 10

You might also like