R.M.

D ENGINEERING COLLEGE
DEPARTMENT OF ECE
QUESTION BANK
DIGITAL SIGNAL PROCESSING
BRANCH/SEM/SEC:CSE/IV/A& B
UNIT I
SIGNALS AND SYSTEMS
Part A

1. What do you understand by the terms : signal and signal processing

2. Determine which of the following signals are periodic and compute their
fundamental period
(AU DEC 07)
a) sin2 t
b)sin20 t+sin5t
3. What are energy and power signals?
(MU Oct. 96)
4. State the convolution property of Z transform
(AU DEC 06)
5. Test the following systems for time invariance:
(DEC 03)
2
x(n)
a) y(n)=n x (n)
b)a
6. Define symmetric and antisymmetric signals. How do you prevent alaising while
sampling a CT signal?
(AU MAY 07)(EC 333, May 07)
7. What are the properties of region of convergence(ROC) ?(AU MAY 07)
8. Differentiate between recursive and non recursive difference equations
(AU APR 05)
9. What are the different types of signal representation?
10. Define correlation
(AU DEC 04)
11. what is the causality condition for LTI systems?
(AU DEC 04)
12. define linear convolution of two DT signals
(AU APR 04)
13. Define system function and stability of DT system
(AU APR 04)
14. Define the following (a) System (b) Discrete-time system
15. What are the classifications of discrete-time system?
16. What is the property of shift-invariant system?
17. Define (a) Static system (b) Dynamic system?
(AU DEC 03)
18. define cumulative and associative law of convolution
(AU DEC 03)
19. Define a stable and causal system
20. What is the necessary and sufficient condition on the impulse response for
stability?
(MU APR.96)
21. What do you understand by linear convolution?
(MU APR. 2000)
22. What are the properties of convolution?
(AU IT Dec. 03)
23. State Parsevals energy theorem for discrete-time aperiodic signals(AU DEC 04)
24. Define DTFT pair
(MU Apr. 99)
25. What is aliasing effect?
(AU MAY 07) (EC 333 DEC 03)
26. State sampling theorem

27. What is an anti-aliasing filter?

28. What is the necessary and sufficient condition on the impulse response for
stability?
(EC 333, May 07)
22. State the condition for a digital filter to be causal and stable

Part-B
1. a) Compute the convolution y(n) of the signals
x(n)= an
-3n5
0
elsewhere
and
h(n)= 1
0n4
0
elsewhere

(AU DEC 07)

b) A discrete time system can be static or dynamic, linear or non-linear, Time

variant or time invariant, causal or non causal, stable or unstable. Examine the
following system with respect to the properties also
(AU DEC 07)
1) y(n)=cos(x(n))
2) y(n)=x(-n+2)
3) y(n)=x(2n)
4)y(n)=x(n) cos n
2. a) Determine the response of the causal system
y(n)-y(n-1)=x(n)+x(n-1) to inputs x(n)=u(n) and x(n)=2 n u(n).Test its stability
b) Determine the IZT of X(Z)=1/(1-Z-1)(1-Z-1)2
(AU DEC 07)
Determine whether each of the following systems defined below is (i) casual (ii)
linear (iii) dynamic (iv) time invariant (v) stable
(a) y(n) = log10[{x(n)}]
(b) y(n) = x(-n-2)
(c) y(n) = cosh[nx(n) + x(n-1)]

3. Compute the convolution of the following signals

x(n) = {1,0,2,5,4} h(n) = {1,-1,1,-1}

h(n) = {1,0,1} x(n) = {1,-2,-2,3,4}

4. Find the convolution of the two signals

x(n) = 3nu(-n); h(n) = (1/3)n u(n-2)
x(n) = (1/3) n u(-n-1); h(n) = u(n-1)
x(n) = u(n) u(n-5); h(n) = 2[u(n) u(n-3)]

5. Find the discrete-time Fourier transform of the following

x(n) = 2-2n for all n
x(n) = 2nu(-n)
x(n) = n [1/2] (n)

6. Determine and sketch the magnitude and phase response of the following systems
(a) y(n) = 1/3 [x(n) + x(n-1) + x(n-2)]
(b) y(n) = [x(n) x(n-1)]
(c) y(n) - 1/2y(n-1)=x(n)
7. a) Determine the impulse response of the filter defined by y(n)=x(n)+by(n-1)
b) A system has unit sample response h(n) given by
h(n)=-1/(n+1)+1/2(n)-1-1/4 (n-1). Is the system BIBO stable? Is the filter
causal? Justify your answer
(DEC 2003)
8. Determine the Fourier transform of the following two signals(CS 331 DEC 2003)
a) a n u(n) for a<1
b) cos n u(n)
9. Check whether the following systems are linear or not
a) y(n)=x 2 (n)
b) y(n)=n x(n)

(AU APR 05)

10. For each impulse response listed below, dtermine if the corresponding system is
i) causal ii) stable
(AU MAY 07)
1) 2 n u(-n)
2) sin n/2
(AU DEC 04)
3) (n)+sin n
4) e 2n u(n-1)
11. Explain with suitable block diagram in detail about the analog to digital
conversion and to reconstruct the analog signal
(AU DEC 07)
12. Find the cross correlation of two sequences
x(n)={1,2,1,1} y(n)={1,1,2,1}

(AU DEC 04)

13. Determine whether the following systems are linear , time invariant
1) y(n)=A x(n)+B
2) y(n)=x(2n)
Find the convolution of the following sequences:
(AU DEC 04)
1) x(n)=u(n) h(n)=u(n-3)
2) x(n)={1,2,-1,1} h(n)={1,0,1,1}

UNIT II
FAST FOURIER TRANSFORMS
1) THE DISCRETE FOURIER TRANSFORM

PART A
1. Find the N-point DFT of a sequence x(n) ={1 ,1, 2, 2}
2. Determine the circular convolution of the sequence x1(n)={1,2,3,1} and
x2(n)={4,3,2,1}
(AU DEC 07)
3. Draw the basic butterfly diagram for radix 2 DIT-FFT and DIF-FFT(AU DEC 07)
4. Determine the DTFT of the sequence x(n)=a n u(n) for a<1
(AU DEC 06)
5. Is the DFT of the finite length sequence periodic? If so state the reason
(AU DEC 05)
6. Find the N-point IDFT of a sequence X(k) ={1 ,0 ,0 ,0}
(Oct 98)
7. what do you mean by in place computation of FFT?
(AU DEC 05)
8. What is zero padding? What are its uses?
(AU DEC 04)
9. List out the properties of DFT
(MU Oct 95,98,Apr 2000)
10. Compute the DFT of x(n)=(n-n0)
11. Find the DFT of the sequence of x(n)= cos (n/4) for 0n 3
(MU Oct 98)
12. Compute the DFT of the sequence whose values for one period is given by
x(n)={1,1,-2,-2}.
(AU Nov 06,MU Apr 99)
13. Find the IDFT of Y(k)={1,0,1,0}
(MU Oct 98)
14. What is zero padding? What are its uses?
15. Define discrete Fourier series.
16. Define circular convolution
17. Distinguish between linear convolution and Circular Convolution.
(MU Oct 96,Oct 97,Oct 98)
18. Obtain the circular convolution of the following sequences x(n)={1, 2, 1} and
h(n)={1, -2, 2}
19. Distinguish between DFT and DTFT
(AU APR 04)
20. Write the analysis and synthesis equation of DFT
(AU DEC 03)
21. Assume two finite duration sequences x1(n) and x2(n) are linearly combined.
What is the DFT of x3(n)?(x3(n)=Ax1(n)+Bx2(n))
(MU Oct 95)
22. If X(k) is a DFT of a sequence x(n) then what is the DFT of real part of x(n)?
23. Calculate the DFT of a sequence x(n)=(1/4)^n for N=16
(MU Oct 97)
24. State and prove time shifting property of DFT
(MU Oct 98)
25. Establish the relation between DFT and Z transform (MU Oct 98,Apr 99,Oct 00)
26. What do you understand by Periodic convolution?
(MU Oct 00)
27. How the circular convolution is obtained using concentric circle method?
(MU Apr 98)
28. State the circular time shifting and circular frequency shifting properties of DFT
29. State and prove Parsevals theorem
30. Find the circular convolution of the two sequences using matrix method
X1(n)={1, 2, 3, 4} and x2(n)={1, 1, 1, 1}

31. State the time reversal property of DFT

32. If the DFT of x(n) is X(k) then what is the DFT of x*(n)?
33. State circular convolution and circular correlation properties of DFT
34. Find the circular convolution of the following two sequences using concentric
circle method
x1(n)={1, 2, 3, 4} and x2(n)={1, 1, 1, 1}
35. The first five coefficients of X(K)={1, 0.2+5j, 2+3j, 2 ,5 }Find the remaining
coefficients
PART B

1. Find 4-point DFT of the following sequences

(a) x(n)={1,-1,0,0}
(b) x(n)={1,1,-2,-2}
(c) x(n)=2n
(d) x(n)=sin(n/2)

(AU DEC 06)

2. Find 8-point DFT of the following sequences

(a) x(n)={1,1,1,1,0,0,0,0}
(b) x(n)={1,2,1,2}
3. Determine IDFT of the following
(a)X(k)={1,1-j2,-1,1+j2}
(b)X(k)={1,0,1,0}
(c)X(k)={1,-2-j,0,-2+j}
4. Find the circular convolution of the following using matrix method and
concentric circle method
(a) x1(n)={1,-1,2,3}; x2(n)={1,1,1};
(b) x1(n)={2,3,-1,2}; x2(n)={-1,2,-1,2};
(c) x1(n)=sin n/2; x2(n)=3n 0n7
5.Calculate the DFT of the sequence x(n)={1,1,-2,-2}
Determine the response of the LTI system by radix2 DIT-FFT?
If the impulse response of a LTI system is h(n)=(1,2,3,-1)

(AU Nov 06).

6. Determine the impulse response for the cascade of two LTI systems having
impulse responses h1(n)=(1/2)^n* u(n),h2(n)=(1/4)^n*u(n)
(AU May 07)
7. Determine the circular convolution of the two sequences x1(n)={1, 2, 3, 4}
x2(n)={1, 1, 1, 1} and prove that it is equal to the linear convolution of the same.
8. Find the output sequence y(n)if h(n)={1,1,1,1} and x(n)={1,2,3,1} using circular
convolution
(AU APR 04)

9. State and prove the following properties of DFT

(AU DEC 03)
1) Cirular convolution 2) Parsevals relation
2) Find the circular convolution of x1(n)={1,2,3,4} x2(n)={4,3,2,1}

2) FAST FOURIER TRANSFORM

PART A
1.
2.
3.
4.

Why FFT is needed?

(AU DEC 03) (MU Oct 95,Apr 98)
What is FFT?
(AU DEC 06)
Obtain the block diagram representation of the FIR filter (AU DEC 06)
Calculate the number of multiplications needed in the calculation of DFT and FFT
with 64 point sequence.
(MU Oct 97, 98).
5. What is the main advantage of FFT?
6. What is FFT?
(AU Nov 06)
7. How many multiplications and additions are required to compute N-point DFT
using radix 2 FFT?
(AU DEC 04)
8. Draw the direct form realization of FIR system
(AU DEC 04)
9. What is decimation-in-time algorithm?
(MU Oct 95).
10. What do you mean by in place computation in DIT-FFT algorithm?
(AU APR 04)
11. What is decimation-in-frequency algorithm?
(MU Oct 95,Apr 98).
12. Mention the advantage of direct and cascade structures (AU APR 04)
13. Draw the direct form realization of the system y(n)=0.5x(n)+0.9y(n-1)
(AU APR 05)
14. Draw the flow graph of a two point DFT for a DIT decomposition.
15. Draw the basic butterfly diagram for DIT and DIF algorithm. (AU 07).
16. How do we can calculate IDFT using FFT algorithm?
17. What are the applications of FFT algorithms?
18. Find the DFT of sequence x(n)={1,2,3,0} using DIT-FFT algorithms
19. Find the DFT of sequence x(n)={1,1, 1, 1} using DIF-FFT algorithms
(AU DEC 04)

PART B
1. Compute an 8-point DFT of the following sequences using DIT and DIF
algorithms
(a)x(n)={1,-1,1,-1,0,0,0,0}
(b)x(n)={1,1,1,1,1,1,1,1}
(AU APR 05)
(c)x(n)={0.5,0,0.5,0,0.5,0,0.5,0}
(d)x(n)={1,2,3,2,1,2,3,2}
(e)x(n)={0,0,1,1,1,1,0,0}
(AU APR 04)

2. Compute the 8 point DFT of the sequence x(n)={0.5, 0.5 ,0.5,0.5,0,0,0,0} using
radix 2 DIF and DIT algorithm
(AU DEC 07)
3. a) Discuss the properties of DFT
b) Discuss the use of FFT algorithm in linear filtering

(AU DEC 07)

4. How do you linear filtering by FFT using save-add method

(AU DEC 06)

5. Compute the IDFT of the following sequences using (a)DIT algorithm (b)DIF
algorithms
(a)X(k)={1,1+j,1-j2,1,0,1+j2,1+j}
(b)X(k)={12,0,0,0,4,0,0,0}
(c)X(k)={5,0,1-j,0,1,0,1+j,0}
(d)X(k)={8,1+j2,1-j,0,1,0,1+j,1-j2}
(e)X(k)={16,1-j4.4142,0,1+j0.4142,0,1-j0.4142,0,1+j4.4142}
6. Derive the equation for DIT algorithm of FFT.
How do you do linear filtering by FFT using Save Add method?

(AU Nov 06)

7. a) From first principles obtain the signal flow graph for computing 8 point DFT
using radix 2 DIT-FFT algorithm.
b) Using the above signal flow graph compute DFT of x(n)=cos(n*)/4 ,0<=n<=7
(AU May 07).
8. Draw the butterfly diagram using 8 pt DIT-FFT for the following sequences
x(n)={1,0,0,0,0,0,0,0}
(AU May 07).
9. a) From first principles obtain the signal flow graph for computing 8 point DFT
using radix 2 DIF-FFT algorithm.
b) Using the above signal flow graph compute DFT of x(n)=cos(n*)/4 ,0<=n<=7
10. State and prove circular time shift and circular frequency shift properties of DFT
11. State and prove circular convolution and circular conjugate properties of DFT
12. Explain the use of FFT algorithms in linear filtering and correlation
13. Determine the direct form realization of the following system
y(n)=-0.1y(n-1)+0.72y(n-2)+0.7x(n)-0.252x(n-2)

(AU APR 05)

14. Determine the cascade and parallel form realization of the following system
y(n)=-0.1y(n-1)+0.2y(n-2)+3x(n)+3.6x(n-1)+0.6x(n-2)
Expalin in detail about the round off errors in digital filters
(AU DEC 04)

UNIT-III
IIR FILTER DESIGN
PART-A
1. Distinguish between Butterworth and Chebyshev filter
2. What is prewarping?
3. Distinguish between FIR and IIR filters

4. Give any two properties of Butterworth and chebyshev filters

(AU DEC 03)

(AU DEC 07)

(AU DEC 06)

5. Give the bilinear transformation

(AU DEC 03)
6. Determine the order of the analog butterworth filter that has a -2 dB pass band
attenuation at a frequency of 20 rad/sec and atleast -10 dB stop band attenuation at 30
rad/sec
(AU DEC 07)
7. By impulse invariant method obtain the digital filter transfer function and

differential equation of the analog filter H(S)=1/S+1

(AU DEC 07)

8. Give the expression for location of poles of normalized butterworth filter

(EC 333, May 07)
9. What are the parameters(specifications) of a chebyshev filter
(EC 333, May 07)
10. Why impulse invariance method is not preferred in the design of IIR filter other than low
pass filter?
11. What are the advantages and disadvantages of bilinear transformation?(AU DEC 04)
12. Write down the transfer function of the first order butterworth filter having low pass
behavior
(AU APR 05)
13. What is warping effect? What is its effect on magnitude and phase response?
14. Find the digital filter transfer function H(Z) by using impulse invariance method for the
analog transfer function H(S)= 1/S+2
(MAY AU 07)
15. Find the digital filter transfer function H(Z) by using bilinear transformation method for
the analog transfer function H(S)= 1/S+3
16. Give the equation for converting a normalized LPF into a BPF with cutoff frequencies l
and u
17. Give the magnitude function of Butterworth filter. What is the effect of varying order of
N on magnitude and phase response?
18. Give any two properties of Butterworth low pass filters.
(MU NOV 06).
19. What are the properties of Chebyshev filter?
(AU NOV 06).
20. Give the equation for the order of N and cut off frequency c of Butterworth filter.
21. Give the Chebyshev filter transfer function and its magnitude response.
22. Distinguish between the frequency response of Chebyshev Type I filter for N odd and N
even.
23. Distinguish between the frequency response of Chebyshev Type I & Type II filter.
24. Give the Butterworth filter transfer function and its magnitude characteristics for
different order of filters.
25. Give the equations for the order N, major, minor and axis of an ellipse in case of
Chebyshev filter.
26. What are the parameters that can be obtained from the Chebyshev filter specification?
(AU MAY 07).

27.
28.
29.
30.
31.
32.
33.
34.
35.
36.
37.
38.
39.
40.

41.
42.
43.
44.
45.
46.

Give the expression for the location of poles and zeros of a Chebyshev Type II filter.
Give the expression for location of poles for a Chebyshev Type I filter. (AU MAY 07)
Distinguish between Butterworth and Chebyshev Type I filter.
How one can design Digital filters from Analog filters.
Mention any two procedures for digitizing the transfer function of an analog filter.
(AU APR 04)
What are properties that are maintained same in the transfer of analog filter into a digital
filter.
What is the mapping procedure between s-plane and z-plane in the method of mapping of
differentials? What is its characteristics?
What is mean by Impulse invariant method of designing IIR filter?
What are the different types of structures for the realization of IIR systems?
Write short notes on prewarping.
What are the advantages and disadvantages of Bilinear transformation?
What is warping effect? What is its effect on magnitude and phase response?
What is Bilinear Transformation?
How many numbers of additions, multiplications and memory locations are required to
realize a system H(z) having M zeros and N poles in direct form-I and direct form II
realization?
Define signal flow graph.
What is the transposition theorem and transposed structure?
Draw the parallel form structure of IIR filter.
Give the transposed direct form II structure of IIR second order system.
What are the different types of filters based on impulse response? (AU 07)
What is the most general form of IIR filter?

PART B
1. a) Derive bilinear transformation for an analog filter with system function
H(S)=b/S+a
(AU DEC 07)
b) Design a single pole low pass digital IIR filter with-3 Db bandwidth of 0.2 by using
bilinear transformation
2. a) Obtain the direct form I, Direct form II, cascade and parallel realization for the
following
Systems
y(n)=-0.1x(n-1)+0.2y(n-2)+3x(n)+3.6x(n-1)+0.6x(n-2)
b) Discuss the limitation of designing an IIR filetr using impulse invariant method
(AU DEC 07)
3. Determine H(Z) for a Butterworth filter satisfying the following specifications:
0.8 H(e j 1, for 0 /4
H(e j 0.2, for /2
Assume T= 0.1 sec. Apply bilinear transformation method
(AU MAY 07)
4.Determine digital Butterworth filter satisfying the following specifications:
0.707 H(e j 1, for 0 /2
H(e j 0.2, for3/4
Assume T= 1 sec. Apply bilinear transformation method. Realize the filter in mose
convenient form
(AU DEC 06)

5. Design a Chebyshev lowpass filter with the specifications p=1 dB ripple in the pass
band 00.2, s=15 dB ripple in the stop band 0.3 using impulse invariance
method(AU DEC 06)

6. Design a Butterworth high pass filter satisfying the following specifications.

p =1 dB; s=15 dB
p =0.4; s =0.2
7. Design a Butterworth low pass filter satisfying the following specifications.
(AU DEC 04)
p=0.10 Hz;p=0.5 dB
s=0.15 HZ;s=15 dB:F=1Hz.
8. Design (a) a Butterworth and (b) a Chebyshev analog high pass filter that will
pass all radian frequencies greater than 200 rad/sec with no more that 2 dB
attuenuation and have a stopband attenuation of greater than 20 dB for all less
than 100 rad/sec.
9. Design a digital filter equivalent to this using impulse invariant method
H(S)=10/S2+7S+10
(AU DEC 03)(AU DEC 04)

10. Use impulse invariance to obtain H(Z) if T= 1 sec and H(s) is

1/(s3 +3s2 +4s+1)
1/(s2+2 s +1)
11. Use bilinear transformation method to obtain H(Z) if T= 1 sec and H(s) is
1/(s+1)(S+2)
(AU DEC 03)
2
1/(s +2 s +1)
12. Briefly explain about bilinear transformation of digital filter design(AU APR 05)
13. Use bilinear transform to design a butterworth LPF with 3 dB cutoff frequeny of
0.2
(AU APR 04)
14. Compare bilinear transformation and impulse invariant mapping
15. a) Design a chebyshev filter with a maxmimum pass band attenuation of 2.5 Db;
at p=20 rad/sec and the stop band attenuation of 30 Db at s=50 rad/sec.
b)Realize the system given by difference equation
y(n)=-0.1 y(n-1)+0.72y(n-2)+0.7x(n)-0.25x(n-2) in parallel form
(EC 333 DEC 07 )

UNIT IV
FIR FILTER DESIGN
PART A
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.
20.
21.
22.
23.
24.

What are the desirable and undesirable features of FIR filter?

Discuss the stability of the FIR filters
(AU APR 04) (AU DEC 03)
What are the main advantages of FIR over IIR
(AU APR 04)
What is the condition satisfied by Linear phase FIR filter? (DEC 04)
(EC
333
MAY 07)
What are the design techniques of designing FIR filters?
What condition on the FIR sequence h(n) are to be imposed in order that this filter can be
called a Linear phase filter?
(AU 07)
State the condition for a digital filter to be a causal and stable.
(AU 06)
What is Gibbs phenomenon?
(AU DEC 04)
(AU DEC 07)

Show that the filter with h(n)={-1, 0, 1} is a linear phase filter

Explain the procedure for designing FIR filters using windows.
(MU 02)
What are desirable characteristics of windows?
What is the principle of designing FIR filters using windows?
What is a window and why it is necessary?
Draw the frequency response of N point rectangular window.
(MU 03)
Give the equation specifying Hanning and Blackman windows.
Give the expression for the frequency response of
Draw the frequency response of N point Bartlett window
Draw the frequency response of N point Blackman window
Draw the frequency response of N point Hanning window.
(AU DEC 03)
What is the necessary and sufficient condition for linear phase characteristics in FIR
filter.
(MU Nov 03)
Give the equation specifying Kaiser window.
Compare rectangular and hanning window functions
Briefly explain the frequency sampling method of filter design
Compare frequency sampling and windowing method of filter design

PART-B
1. Use window method with a Hamming window to design a 13-tap differentiator
(N=13).
(AU 07)
2. i) Prove that FIR filter has linear phase if the unit impulse responsesatisfies the
condition h(n)=h(N-1-n), n=0,1,M-1. Also discuss symmetric and
antisymmetric cases of FIR filter
(AU DEC 07)

3. What are the issues in designing FIR filter using window method?(AU APR 04,
DEC 03)

4. ii) Explain the need for the use of window sequences in the design of FIR filter.
Describe the window sequences generally used and compare their properties
5. Derive the frequency response of a linear phase FIR filter when impulse responses
symmetric & order N is EVEN and mention its applications

6. i) Explain the type I design of FIR filter using frequency sampling method
ii) A low pass filter has the desired response as given below
Hd(ej)= e j3, 0/2
0
/2
Determine the filter coefficients h(n) for M=7 using frequency sampling
technique
(AU DEC 07)

7. i) Derive the frequency response of a linear phase FIR filter when impulse responses
antisymmetric & order N is odd
ii) Explain design of FIR filter by frequency sampling technique (AU MAY 07)

7. Design an approximation to an ideal bandpass filter with magnitude response

H(ej) = 1 ; 434
0 ; otherwise
Take N=11.
(AU DEC 04)
8. Design a 15-tap linear phase filter to the following discrete frequency response
(N=15) using frequency sampling method
(MU 03)
H(k) = 1
0k4
= 0.5
k=5
= 0.25
k=6
= 0.1
k=7
=0
elsewhere
9.

Design an ideal band pass digital FIR filter with desired frequency response
H(e j )= 1 for 0.25 0.75
0 for 0.25 and 0.75
by using rectangular window function of length N=11.
(AU DEC 07)

10. Design an Ideal Hilbert transformer using hanning window and

Blackman window for N=11. Plot the frequency response in both
Cases
11. a) How is the design of linear phase FIR filter done by frequency sampling method?
Explain.
b) Determine the coefficients of a linear phase FIR filter of length N=15 which has
Symmetric unit sample response and a frequency response that satisfies the following
conditions
H r (2 k/15) = 1 for k=0,1,2,3

0 for k=4
0 for k=5,6,7
12. An FIR filter is given by the difference equation
y(n)=2x(n)+4/5 x(n-1)+3/2 x(n-2)+2/3 x(n-3) Determine its lattice form(EC 333 DEC 07)
13. Using a rectangular window technique design a low pass filter with pass band gain of unity
cut off frequency of 1000 Hz and working at a sampling frequency of 5 KHz. The length
of the impulse response should be 7.( EC 333 DEC 07)
16. Design an Ideal Hilbert transformer using rectangular window and Black man window
for N=11. Plot the frequency response in both Cases (EC 333 DEC 07)

9. 17. Design an approximation to an ideal lowpass filter with magnitude response

H(ej) = 1 ; 04
0 ; otherwise
Take N=11.Use hanning and hamming window (AU DEC 04)

UNIT V
FINITE WORD LENGTH EFFECTS
PART A
1. What do you understand by a fixed point number?
(MU Oct95)
2. Express the fraction 7/8 and -7/8 in sign magnitude, 2s complement and 1s
complement
(AU DEC 06)
3. What are the quantization errors due to finite word length registers in digital filters?

4. What are the different quantization methods?

(AU DEC 06)

(AU DEC 07)

5. What are the different types of fixed point number representation?

6. What do you understand by sign-magnitude representation?
7. What do you understand by 2s complement representation?
8. Write an account on floating point arithmetic?
(MU Apr 2000)
9. What is meant by block floating point representation? What are its advantages?
10. what are advantages of floating point arithmetic?
11. Compare the fixed point and floating point arithmetic.
(MU Oct96)
12. What are the three quantization errors due to finite word length registers in
digital filters?
(MU Oct98)
13. How the multiplication and addition are carried out in floating point
arithmetic?
14. Brief on co-efficient inaccuracy.
15. What do you understand by input quantization error?
16. What is product quantization error?
17. What is meant by A/D conversion mode?
18. What is the effect of quantization on pole locations?

19. What are the assumptions made concerning the statistical independence of
various noise sources that occur in realizing the filter?
(M.U. Apr 96)
20. What is zero input limit cycle overflow oscillation
(AU 07)
21. What is meant by limit cycle oscillations?(M.U Oct 97, 98, Apr 2000) (AU DEC 07)
29. Explain briefly the need for scaling digital filter implementation?
(M.U Oct 98)(AU-DEC 07)
30. Why rounding is preferred than truncation in realizing digital filter? (M.U. Apr 00)
31. Define the deadband of the filter?
(AU 06)
25. Determine the dead band of the filter with pole at 0.5 and the number of bits used
for quantization is 4(including sign bit)
26. Draw the quantization noise model for a first order IIR system
27. What is meant by rounding? Draw the pdf of round off error
28. What is meant by truncation? Draw the pdf of round off error
29. What do you mean by quantization step size?
30. Find the quantization step size of the quantizer with 3 bits
31. Give the expression for signal to quantization noise ratio and calculate the
improvement with an increase of 2 bits to the existing bit.
32. Express the following binary numbers in decimal
A) (100111.1110)2
(B) (101110.1111)2
C (10011.011)2
33.Why rounding is preferred to truncation in realizing digital filter? (EC 333, May 07)

34. List the different types of frequency domain coding

35. What is subband coding?

(EC 333 MAY 07)

(EC 333 MAY 07)

PART-B
1. Draw the quantization noise model for a second order system and explain
H(z)=1/(1-2rcosz-1+r2z-2) and find its steady state output noise variance (ECE AU 05)
2. Consider the transfer function H(z)=H1(z)H2(z) where
H1(z)=1/(1-a1z-1) , H2(z)=1/(1-a2z-2).Find the output round off noise power.
Assume a1=0.5 and a2=0.6 and find out the output round off noise power.
(ECE AU 04)(EC 333 DEC 07)
3. Find the effect of coefficient quantiztion on pole locations of the given second
order IIR system when it is realized in direct form I and in cascade form. Assume a
word length of 4-bits through truncation.
H(z)= 1/(1-0.9z-1+0.2z 2)
(AU Nov 05)
4. Explain the characteristics of Limit cycle oscillations with respect to the system described
by the differential equations.
y(n)=0.95y(n-1)+x(n) and
determine the dead band of the filter
(AU Nov 04)
5. i) Describe the quantization errors that occur in rounding and truncation in twos
complement
ii) Draw a sample/hold circuit and explain its operation
iii) What is a vocoder? Expalin with a block diagram
(AU DEC 07)
6. Two first order low pass filter whose system functions are given below are connected in
cascade. Determine the overall output noise power
H1(Z)=1/(1-0.9Z-1) H2(Z)=1/(1-0.8Z-1)
(AU DEC 07)

7. Consider a Butterworth lowpass filter whose transfer function is

H(z)=0.05( 1+z-1)2 /(1-1.2z-1 +0.8 z-2 ).
Compute the pole positions in z-plane and calculate the scale factor So to prevent
overflow in adder 1.
8. Express the following decimal numbers in binary form
A) 525

B) 152.1875

C) 225.3275

10. Express the decimal values 0.78125 and -0.1875 in

Ones complement form
sign magnitude form
Twos complement form.
11. Express the decimal values -6/8 and 9/8 in (i) Sign magnitude form (ii) Ones complement
form (iii) Twos complement form
12. Study the limit cycle behavior of the following systems
i. y(n) = 0.7y(n-1) + x (n)
ii. y(n) = 0.65y(n-2) + 0.52y (n-1) + x (n)
13. For the system with system function H (z) =1+0.75z-1 / 1-0.4z-1 draw the signal flow graph
14. and find scale factor s0 to prevent overflow limit cycle oscillations
15. Derive the quantization input nose power and determine the signal to noise ratio of the system
16. Derive the truncation error and round off error noise power and compare both errors
17. Explain product quantization error and coefficient quantization error with examples
18. Derive the scaling factor So that prevents the overflow limit cycle oscillations in a second
order IIR system.
19. The input to the system y(n)=0.999y(n-1)+x(n) is applied to an ADC. What is the power
produced by the quantization noise at the output of the filter if the input is quantized to
1) 8 bits

2) 16 bits

(EC 333 DEC 07)

19. Convert the following decimal numbers into binary:

1) (20.675)

(EC 333 DEC 07)

2) (120.75)
10

10

20. Find the steady state variance of the noise in the output due to quantization of input for the
(EC 333 DEC 07)
first order filter y(n)=ay(n-1)+x(n)

ANAND INSTITUTE OF HIGHER TECHNOLOGY

KAZHIPATTUR, CHENNAI 603 103
DEPARTMENT OF ECE
Date: 15-05-2009
PART-A QUESTIONS AND ANSWERS
Subject
: Digital signal Processing
Sub Code : IT1252
Staff Name: Robert Theivadas.J
Class
: VII Sem/CSE A&B
UNIT-1 - SIGNALS AND SYSTEMS
PART A
1. Determine which of the following sinusoids are periodic and compute their fundamental
period
(a) Cos 0.01n
(b) sin (62n/10)

Nov/Dec 2008 CSE

a) Cos 0.01 n
Wo=0.01 the fundamental frequency is multiply of .Therefore the signal is
periodic
Fundamental period
N=2 [m/wo]
=2(m/0.01)
Choose the smallest value of m that will make N an integer
M=0.1
N=2(0.1/0.01)
N=20
Fundamental period N=20
b) sin (62n/10)
Wo=0.01 the fundamental frequency is multiply of .Therefore the signal is
periodic
Fundamental period
N=2 [m/wo]
=2(m/(62/10))
Choose the smallest value of m that will make N an integer
M=31
N=2(310/62)
N=10
Fundamental period N=10
2. State sampling theorem
Nov/Dec 2008 CSE
A band limited continuous time signal, with higher frequency f max Hz can be uniquely
recovered from its samples provided that the sampling rate Fs>2fmax samples per second
3. State sampling theorem , and find Nyquist rate of the signal
x(t)=5 sin250 t + 6cos300 t
April/May2008 CSE
A band limited continuous time signal, with higher frequency f max Hz can be
uniquely recovered from its samples provided that the sampling rate Fs>2f max samples
per second.
Nyquist rate

x(t)=5 sin250t+ 6cos300 t

Frequency present in the signals
F1=125Hz
F2=150Hz
Fmax=150Hz
Fs>2Fmax=300 Hz
The Nyquist rate is FN= 300Hz
4. State and prove convolution property of Z transform.
April/May2008
Convolution Property
(MAY 2006 ECESS)

CSE

5. Determine which of the following signals are periodic and compute their
fundamental period.
Nov/Dec 2007 CSE
(a) sin 2t
(b) sin 20t + sin 5t
(a) sin 2t
wo=2 .The Fundamental frequency is multiply of .Therefore, the signal is
Periodic .
Fundamental period
N=2 [m/wo]
= 2 [m/2]
m=2
=2 [2/2]
N=2
(b) sin 20t + sin 5t
wo=20, 5 .The Fundamental frequency is multiply of .Therefore, the signal is
Periodic .
Fundamental period of signal sin 20t
N1=2 [m/wo]
=2 [m/20]
m=1
=1/10
Fundamental period of signal sin 5t
N2=2 [m/wo]
=2 [m/5]
m=1
=2/5
N1/N2=(1/10)/(2/5)
=1/4
4N1=N2

N= 4N1=N2
N=2/5
6. Determine the circular convolution of the sequence x1(n)={1,2,3,1} and
x2(n)={4,3,2,1}.
Nov/Dec 2007 CSE
Soln:
x1(n)={1,2,3,1}
x2(n)={4,3,2,1}.

Y(n)=

15,16,21,15

7. Define Z transform for x(n)=-nan u(-n-1)

April/May 2008 IT

X(n) =-nan u(-1-n)

X (z)=
=

u(-n-1)=0for n>1

=
== -z d/dz X(z)
=z d/dz(

)=

8. Find whether the signal y= n2 x(n) is linear

Y= x(n)
Y1(n)=T[x1(n)]=

x1(n)

Y2(n)= T[x2(n)]=

x2(n)

April/May 2008 IT

The weighted sum of input is

a1 T[x1(n)]+a2 T[x2(n)]=a1 x1(n)+a2 x2(n)-----------1
the output due to weighted sum of input is
y3(n)=T[a1X1(n)+a2X2(n)]
= a1 x1(n)+a2 x2(n)----------------------------------2
9. Is the system y(n)=ln[x(n)] is linear and time invariant?
(MAY 2006 IT)
The system y(n)=ln[x(n)] is non-linear and time invariant
alnx1(n)+blnx2(n) ln(ax1(n)+bx2(n) Non-linear system
lnx (n)=lnx (n-n0) Time invariant system
10. Write down the expression for discrete time unit impulse and
unit step function.
(APR 2005 IT).
Discrete time unit impulse function
(n) =1, n=0
=0, n0
Discrete time step impulse function.
u(n) = 1, for n0
= 0 for n<0
11. List the properties of DT sinusoids.
(NOV 2005 IT)
DT sinusoid is periodic only if its frequency f is a rational number.
DT sinusoid whose frequencies are separated by an integer multiple of 2 are
identical.
12. Determine the response a system with y(n)=x(n-1) for the input signal
x(n) = |n| for -3n3
= 0 otherwise
(NOV 2005 IT)
x(n)= {3,2,1,0,1,2,3}
y(n) = x(n-1) ={3,2,1,0,1,2,3}
13. Define linear convolution of two DT signals.
(APR 2004 IT)
y(n)=x(n)*h(n), * represent the convolution operator
y(n), x(n)&h(n), Output, Input and response of the system respectively.
14. Define system function and stability of a DT system.
(APR 2004 IT)
H(z)=Y(z)/X(z)
H(z),Y(z) & X(z)z-transform of the system impulse, output and input respectively.
15. What is the causality condition for an LTI system?
(NOV 2004 IT)
Conditions for the causality
h(n)=0 for n<0
16. What are the different methods of evaluating inverse z transform.
(NOV 2004 IT)
Long division method
Partial fraction expansion method
Residue method
Convolution method

UNIT-II - FAST FOURIER TRANSFORMS

1. Find out the DFT of the signal X(n)=

(n)

Nov/Dec 2008 CSE

X(n)={1,0,0,0}

X(k)={1,1,1,1}
2. What is meant by bit reversal and in place commutation as applied to FFT?
Nov/Dec 2008
CSE
"Bit reversal" is just what it sounds like: reversing the bits in a binary word from
left to write. Therefore the MSB's become LSB's and the LSB's become MSB's.The data
ordering required by radix-2 FFT's turns out to be in "bit reversed" order, so bit-reversed
indexes are used to combine FFT stages.
Input sample
index
0
1
2
3
4
5
6
7

Binary
Representation
000
001
010
011
100
101
110
111

Bit reversed
binary
000
100
010
110
001
101
011
111

Bit reversal
sample index
0
4
2
6
1
5
3
7

3. Draw radix 4 butterfly structure for (DIT) FFT algorithm

April/May2008 CSE

4. Find DFT for {1,0,0,1}.

2008 IT

April/May2008 CSE /April/May

5. Draw the basic butterfly diagram for radix 2 DIT-FFT and DIF-FFT.
Nov/Dec
2007 CSE
Butterfly Structure for DIT FFT
The DIT structure can be expressed as a butterfly diagram

MAY 2006 ECESS

&(NOV 2006 ITSS)

The DIF structure expressed as a butterfly diagram

6. What are the advantages of Bilinear mapping

April/May 2008 IT
Aliasing is avoided
Mapping the S plane to the Z plane is one to one
The closed left half of the S plane is mapped onto the unit disk of the Z plane
7. How may multiplication and addition is needed for radix-2 FFT? April/May 2008 IT
Number of complex addition is given by N
Number of complex multiplication is given by N/2
8. Define DTFT pair?

(May/June 2007)-ECE

The DTFT pairs are

(MAY 2006 IT)
-j2kn/N
X(k) = x(n)e
X(n) = x(k)ej2kn/N
9. Define Complex Conjugate of DFT property.
(May/Jun 2007)-ECE
DFT
If
x(n)X(k) then
N
X*(n)(X*(-k))N = X*(N- K)
10.Differentiate between DIT and DIF FFT algorithms.
(MAY 2006 IT)
S.No
1

DIT FFT algorithm

Decimation in time FFT algorithm

DIF FFT algorithm

Decimation in frequency FFT
algorithm
2
Twiddle factor k=(Nt/2m)
Twiddle factor k=(Nt/2M-m+1)
11.Give any two properties of DFT
(APR 2004 IT SS)
Linearity : DFT [ax(n)+b y(n)]=a X(K)+bX(K)
Periodicity: x(n+N)=x(n) for all n
X(K+N)=X(K) for all n
12.What are the advantages of FFT algorithm over direct computation of DFT?
(May/June 2007)-ECE
The complex multiplication in the FFT algorithm is reduced by (N/2) log2N times.
Processing speed is very high compared to the direct computation of DFT.

13. What is FFT?

(Nov/Dec 2006)ECE
The fast Fourier transform is an algorithm is used to calculate the DFT. It is based on
fundamental principal of decomposing the computation of DFT of a sequence of the length N in
to successively smaller discrete Fourier Transforms. The FFT algorithm provides speed increase
factor when compared with direct computation of the DFT.
14.Determine the DIFT of a sequence x(n) = an u(n)
(Nov/Dec 2006)-ECE
X(K) =

x(n) ej2kn/N

The given sequence x(n) = an u(n)

DTFT{x(n)} =
x(n) ej2kn/N
j2k/N n
=
(a e
)
Where
an = 1-an/(1-a)
X(K) = (1 aNej2k)/ (1-aej2k/N)
15. What do you mean by in place computation in FFT.
(APR 2005 IT)
FFT algorithms, for computing the DFT when the size N is a power of 2 and when it
is a power of 4
16.Is the DFT is a finite length sequence periodic. Then state the reason
(APR 2005
ITDSP)
DFT is a finite length sequence periodic.
N-1
X(ej )= x(n) e-jn
n =0
j
X(e ) is continuous & periodic in , with period 2.

UNIT-III - IIR FILTER DESIGN

1. What are the requirements for converting a stable analog filter into a stable digital filter?
Nov/Dec 2008 CSE
The J axis in the s plane should be map into the unit circle in the Z plane .thus there
will be a direct relationship between the two frequency variables in the two domains
The left half plane of the s plane should be map into the inside of the unit circle in the z
plane .thus the stable analog filter will be converted to a stable digital filter
2. Distinguish between the frequency response of chebyshev type I and Type II filter
Nov/Dec 2008 CSE

Type I chebyshev filter

Type II chebyshev filter

Type I chebyshev filters are all pole filters that exhibit equirpple behavior in the pass
band and monotonic in stop band .Type II chebyshev filters contain both poles and zeros
and exhibits a monotonic behavior in the pass band and an equiripple behavior in the stop
band
3. What is the need for prewraping in the design of IIR filter
Nov/Dec 2008 CSE
The warping effect can be eliminated by prewarping the analog filter .This can be done
by finding prewarping analog frequencies using the formula
= 2tan-1T/2
4.Write frequency translation for BPF from LPF
April/May2008 CSE
Low pass with cut off frequency C to band pass with lower cut-off frequency 1 and
higher cut-off frequency 2:
S ------------- C (s2 + 1 2) / s (2 - 1)
The system function of the high pass filter is then
H(s) = Hp { C ( s2 + 1 2) / s (2 - 1)}
5.Compare Butterworth, Chebyshev filters
CSE

April/May2008

Butter Worth Filter

Chebyshev filters.

Magnitude response of Butterworth filter

decreases monotonically, as frequency

Magnitude response of chebyshev filter

exhibits ripple in pass band

increases from 0

Poles on the butter worth lies on the circle

Poles of the chebyshev filter lies on the

ellipse

6. Determine the order of the analog Butterworth filter that has a -2 db pass band
attenuation at a frequency of 20 rad/sec and atleast -10 db stop band attenuation at 30
rad/sec.
Nov/Dec 2007CSE
p =2 dB; p =20 rad/sec
s = 10 dB; s = 30 rad/sec
log100.1 s -1/ 100.1 p -1
N
Log s/ p
log10 -1/ 100.2 -1
N
Log 30/ 20
3.37
Rounding we get N=4
7. By Impulse Invariant method, obtain the digital filter transfer function
and differential equation of the analog filter H(s)=1 / (s+1)
Nov/Dec 2007
CSE
H(s) =1/(s+1)
Using partial fraction
H(s) =A/(s+1)
= 1/(s-(-1)
Using impulse invariance method
H (z) =1/1-e-Tz-1
AssumeT=1sec
H(z)=1/1-e-1z-1
H(z)=1/1-0.3678z-1
8.Distinguish between FIR and IIR filters.
Sl.No
1
2

Nov/Dec 2007 CSE

IIR
FIR
H(n) is infinite duration
H(n) is finite duration
Poles as well as zeros are
These are all zero filters.
present. Sometimes all pole
filters are also designed.
These filters use feedback
These filters do not use
from output. They are
feedback. They are nonrecursive.
recursive filters.
Nonlinear phase response. Linear
Linear phase response for
phase is obtained if
h(n) = h(m-1-n)
H(z) = Z-1H(Z-1)
These filters are to be designed for
These are inherently stable
stability
filters

Number of
More
multiplication requirement is less.
7
More complexity of implementation Less complexity of implementation
8
Less memory is required
More memory is requied
9
Design procedure is complication
Less complicated
10
Design methods:
Design methods:
1. Bilinear Transform
1. Windowing
2. Impulse invariance.
2. Frequency sampling
11
Can be used where sharp
Used where linear phase
cutoff characteristics
characteristic is essential.
with minimum order are required
9.Define Parsevals relation
April/May 2008 IT
If X1(n) and X2(n) are complex valued sequences ,then
= 1/2j
10.What are the advantages and disadvantages of bilinear transformation?
(May/June 2006)-ECE
Advantages:
1. Many to one mapping.
2. linear frequency relationship between analog and its transformed digital frequency,
Disadvantage:
Aliasing
11.What is frequency warping? (MAY 2006 IT DSP)
The bilinear transform is a method of compressing the infinite, straight analog
frequency axis to a finite one long enough to wrap around the unit circle only once.
This is also sometimes called frequency warping. This introduces a distortion in the
frequency. This is undone by pre-warping the critical frequencies of the analog filter
(cutoff frequency, center frequency) such that when the analog filter is transformed
into the digital filter, the designed digital filter will meet the desired specifications.
12. Give any two properties of Butterworth filter and chebyshev filter. (Nov/Dec 2006)
a. The magnitude response of the Butterworth filter decreases monotonically as the
frequency increases () from 0 to .
b. The magnitude response of the Butterworth filter closely approximates the ideal
response as the order N increases.
c. The poles on the Butterworth filter lies on the circle.
d. The magnitude response of the chebyshev type-I filter exhibits ripple in the pass
band.
e. The poles of the Chebyshev type-I filter lies on an ellipse.
S = (2/T) (Z-1) (Z+1)
13.Find the transfer function for normalized Butterworth filter of order 1 by determining
the pole values.
(MAY 2006 IT DSP)
Poles = 2N
N=1
Poles = 2
14..Differentiate between recursive and non-recursive difference equations.
(APR 2005 ITDSP)
The FIR system is a non-recursive system, described by the difference
equation
M-1

y(n) = bkx(n-k)
k=0
The IIR system is a non-recursive system, described by the difference
equation
N
M
y(n) = bkx(n-k)- aky(n-k)
k=0
k=1
15.Find the order and poles of Butterworth LPF that has -3dB bandwidth of 500 Hz and an
attenuation of -40 dB at 1000 Hz.
(NOV 2005 ITDSP)
p = -3dB s = -40dB s = 1000*2 rad/sec p=500*2
The order of the filter N (log(/))/(log(s/p))
= (100.1s-1)1/2 = 99.995
= (100.1p-1)1/2 = 0.9976
N = (log(99.995/0.9976))/(log(2000/1000)) = 2/0.3 = 6.64
N 6.64 = 7
Poles=2N=14
16.What is impulse invariant mapping? What is its limitation?
(Apr/May 2005)-ECE
The philosophy of this technique is to transform an analog prototype filter into an
IIR discrete time filter whose impulse response [h(n)] is a sampled version of the analog
filters impulse response, multiplied by T.This procedure involves choosing the response of
the digital filter as an equi-spaced sampled version of the analog filter.
17.Give the bilinear transformation.
(Nov/Dec 2003)-ECE
The bilinear transformation method overcomes the effect of aliasing that is
caused due to the analog frequency response containing components at or beyond the
nyquist frequency. The bilinear transform is a method of compressing the infinite,
straight analog frequency axis to a finite one long enough to wrap around the unit
circle only once.
18.Mention advantages of direct form II and cascade structures.
(APR 2004
ITDSP)
(i) The main advantage direct form-II structure realization is that the number of delay
elements is reduced by half. Hence, the system complexity drastically reduces the
number of memory elements .
(ii) Cascade structure realization, the system function is expressed as a product of
several sub system functions. Each sum system in the cascade structure is realized in
direct form-II. The order of each sub system may be two or three (depends) or more.
19. What is prewarping?
(Nov/Dec 2003)-ECE
When bilinear transformation is applied, the discrete time frequency is related
continuous time frequency as,
= 2tan-1T/2
This equation shows that frequency relationship is highly nonlinear. It is also
called frequency warping. This effect can be nullified by applying prewarping. The
specifications of equivalent analog filter are obtained by following relationship,
= 2/T tan /2
This is called prewarping relationship.
UNIT-IV - FIR FILTER DESIGN
1.What is gibbs Phenomenon.

April/May2008 CSE
The oscillatory behavior of the approximation XN(W) to the
function X(w) at a point of discontinuity of X(w) is called Gibbs Phenomenon
2.Write procedure for designing FIR filter using windows.
April/May2008 CSE
1. Begin with the desired frequency response specification Hd(w)

2. Determine the corresponding unit sample response hd(n)

3. Indeed hd(n) is related to Hd(w) by the Fourier Transform relation.
3.What are Gibbs oscillations?
Nov/Dec 2007
CSE
Oscillatory behavior observed when a square wave is reconstructed from finite
number of harmonics.
The unit cell of the square wave is given by

Its Fourier series representation is

4. Explain briefly the need for scaling in the digital filter realization
Nov/Dec 2007
CSE
To prevent overflow, the signal level at certain points in the digital filters must be
scaled so that no overflow occur in the adder
5. What are the advantages of FIR filters?
April/May 2008 IT
1.FIR filter has exact linear phase
2.FIR filter always stable
3.FIR filter can be realized in both recursive and non recursive structure
4.Filters wit h any arbitrary magnitude response can be tackled using FIR sequency
6. Define Phase Dealy
April/May 2008 IT
When the input signal X(n) is applied which has non zero response
the output signal y(n) experience a delay with respect to the input
signal .Let the input signal be
X(n)=A
, +
Where A= Maximum Amplitude of the signal
Wo=Frequency in radians
f=phase angle
Due to the delay in the system response ,the output signal lagging in phase
but the
frequency remain the same
Y(n)=
A
,
In This equation that the output is the time delayed signal and is more commonly known
as phase delayed at w=wo

Is called phase delay

7. State the advantages and disadvantages of FIR filter over IIR filter.
(MAY 2006 IT DSP) & (NOV 2004
ECEDSP)

Advantages of FIR filter over IIR filter

It is a stable filter
It exhibit linear phase, hence can be easily designed.
It can be realized with recursive and non-recursive structures
It is free of limit cycle oscillations when implemented on a finite word length
digital system
Disadvantages of FIR filter over IIR filter
Obtaining narrow transition band is more complex.
Memory requirement is very high
Execution time in processor implementation is very high.
8. List out the different forms of structural realization available for realizing a FIR system.
(MAY 2006 IT DSP)
The different types of structures for realization of FIR system are
1.Direct form-I 2. Direct form-II
9. What are the desirable and undesirable features of FIR Filters?
(May/June
2006)ECE
The width of the main lobe should be small and it should contain as much of total
energy as possible.The side lobes should decease in energy rapidly as w tends to
10. Define Hanning and Blackman window functions.
(May/June 2006)-ECE
The window function of a causal hanning window is given by
WHann(n) = 0.5 0.5cos2n/ (M-1), 0nM-1
0,
Otherwise
The window function of non-causal Hanning window I s expressed by
WHann(n) = 0.5 + 0.5cos2n/ (M-1), 0|n|(M-1)/2
0,
Otherwise
The width of the main lobe is approximately 8/M and thee peak of the first side lobe is
at -32dB.
The window function of a causal Blackman window is expressed by
WB(n) = 0.42 0.5 cos2n/ (M-1) +0.08 cos4n/(M-1), 0nM-1
= 0,
otherwise
The window function of a non causal Blackman window is expressed by
WB(n) = 0.42 + 0.5 cos2n/ (M-1) +0.08 cos4n/(M-1), 0|n|(M-1)/2
= 0,
otherwise
The width of the main lobe is approximately 12/M and the peak of the first side lobe is
at -58dB.
11. What is the condition for linear phase of a digital filter?
(APR 2005 ITDSP)
h(n) = h(M-1-n) Linear phase FIR filter with a nonzero response at =0
h(n) = -h(M-1-n)Low pass Linear phase FIR filter with a nonzero
response at =0
12. Define backward and forward predictions in FIR lattice filter.
(NOV 2005 IT)
The reflection coefficient in the lattice predictor is the negative of the cross correlation
coefficients between forward and backward prediction errors in the lattice.
13. List the important characteristics of physically realizable filters. (NOV 2005 ITDSP)
Symmetric and anti- symmetric
Linear phase frequency response
Impulse invariance
14. Write the magnitude function of Butterworth filter. What is the effect of varying order of N
on magnitude and phase response? (Nov/Dec2005) -ECE
|H(j)|2 = 1 / [ 1 + (/C)2N] where N= 1,2,3,.

15. List the characteristics of FIR filters designed using window functions. NOV 2004
ITDSP

the Fourier transform of the window function W(ejw) should have a small width
of main lobe containing as much of the total energy as possible
the fourier transform of the window function W(ejw) should have side lobes that
decrease in energy rapidly as w to . Some of the most frequently used window
functions are described in the following sections
16. Give the Kaiser Window function.
(Apr/May 2004)-ECE
The Kaiser Window function is given by
WK(n) = I0() / I0() , for |n| (M-1)/2
Where is an independent variable determined by Kaiser.
= [ 1 (2n/M-1)2]
17. What is meant by FIR filter? And why is it stable?
(APR 2004 ITDSP)
FIR filter Finite Impulse Response. The desired frequency response of a FIR
filter can be represented as

Hd(ej)= hd(n)e-jn
n= -
If h(n) is absolutely summable(i.e., Bounded Input Bounded Output Stable).
So, it is in stable.
18. Mention two transformations to digitize an analog filter.
(APR 2004 ITDSP)
(i)
Impulse-Invariant transformation techniques
(ii)
Bilinear transformation techniques
19. Draw the direct form realization of FIR system.
(NOV
2004
ITDSP)

20.Give the equation specifying Barlett and hamming window.

(NOV 2004 ITDSP)
The transfer function of Barlett window
wB(n) = 1-(2|n|)/(N-1), ((N-1)/2)n-((N-1)/2)
The transfer function of Hamming window
whm(n) = 0.54+0.46cos((2n)/(N-1), ((N-1)/2)n-((N-1)/2) = 0.54

UNIT-V - FINITE WORD LENGTH EFFECTS

1. Compare fixed point and floating point arithmetic. Nov/Dec 2008 CSE&MAY 2006 IT

Fixed Point Arithmetic

It covers only the dynamic

range.
Compared to FPA, accuracy
is poor
Compared to FPA it is low
cost and easy to design
It is preferred for real time
operation system
Errors occurs only for
multiplication

Floating Point Arithmetic

It covers a large range of numbers
It attains its higher accuracy
Hardware implementation is costlier
and difficult to design
It is not preferred for real time
operations.
Truncation and rounding errors occur
both for multiplication and addition
Processing speed is low
Overflow is a range phenomenon

Processing speed is high

Overflow
is
rare
phenomenon

2.What are the errors that arise due to truncation in floating point numbers
Nov/Dec 2008
CSE
1.Quantization error
2.Truncation error
Et=Nt-N
3.What are the effects of truncating an infinite flourier series into a finite series?
Nov/Dec 2008
CSE
4. Draw block diagram to convert a 500 m/s signal to 2500 m/s signal and state the problem
due to this conversion
April/May2008
CSE

5.List errors due to finite world length in filter design

CSE

Input quantization error

Product quantization error
Coefficient quantization error

April/May2008

5. What do you mean by limit cycle oscillations in digital filter?

Nov/Dec 2007
CSE
In recursive system the nonlinearities due to the finite precision arithmetic
operations often cause periodic oscillations to occur in the output ,even when the input
sequence is zero or some non zero constant value .such oscillation in recursive system
are called limit cycle oscillation
7.Define truncation error for sign magnitude representation and for 2s complement
Representation
April/May 2008 IT&APR 2005 IT
Truncation is a process of discarding all bits less significant than least significant bit
that is retained For truncation in floating point system the effect is seen only in
mantissa.if the mantissa is truncated to b bits ,then the error satisfies
0 > -2.2-b for x >0 and
0 < -2.2-b for x <0
8. What are the types of limit cycle oscillation?
April/May 2008 IT
i.Zero input limit cycle oscillation
ii.overflow limit cycle oscillation
9. What is meant by overflow limit cycle oscillations? (May/Jun 2006 )
In fixed point addition, overflow occurs due to excess of results bit, which are
stored at the registers. Due to this overflow, oscillation will occur in the system. Thus
oscillation is called as an overflow limit cycle oscillation.
10. How will you avoid Limit cycle oscillations due to overflow in addition(MAY 2006 IT
DSP)
Condition to avoid the Limit cycle oscillations due to overflow in addition
|a1|+|a2|<1
a1 and a2 are the parameter for stable filter from stability triangle.
11.What are the different quantization methods?
(Nov/Dec 2006)-ECE
amplitude quantization
vector quantization
scalar quantization
12.List the advantages of floating point arithmetic.
(Nov/Dec 2006)-ECE
Large dynamic range
Occurrence of overflow is very rare
Higher accuracy
13.Give the expression for signal to quantization noise ratio and calculate the improvement
with an increase of 2 bits to the existing bit.
(Nov/Dec 2006, Nov/Dec 2005)-ECE
SNRA / D = 16.81+6.02b-20log10 (RFS /x) dB.
With b = 2 bits increase, the signal to noise ratio will increase by 6.02
X 2 = 12dB.
14. What is truncation error?
(APR 2005 ITDSP)
Truncation is an approximation scheme wherein the rounded number or
digits after the pre-defined decimal position are discarded.
15. What are decimators and interpolators?
(APR 2005 ITDSP)
Decimation is a process of reducing the sampling rate by a factor D, i.e.,
down-sampling. Interpolation is a process of increasing the sampling rate by a
factor I, i.e., up-sampling.
16.What is the effect of down sampling on the spectrum of a signal?
(APR 2005 ITDSP) & (APR 2005 ITDSP)

The signal (n) with spectrum X() is to be down sampled by the factor D. The
spectrum X() is assumed to be non-zero in the frequency interval 0||.
17.Give the rounding errors for fixed and floating point arithmetic.
(APR 2004 ITDSP)
A number x represented by b bits which results in bR after being
Rounded off. The quantized error R due to rounding is given by
R=QR(x)-x
where QR(x) = quantized number(rounding error)
The rounding error is independent of the types of fixed point arithmetic, since
it involves the magnitude of the number. The rounding error is symmetric about
zero and falls in the range.
-((2-bT-2-b)/2) R ((2-bT-2-b)/2)
R may be +ve or ve and depends on the value of x.
The error R incurred due to rounding off floating point number is in the range
-2E.2-bR/2) R 2E.2-bR/2
18.Define the basic operations in multirate signal processing.
(APR 2004 ITDSP)
The basic operations in multirate signal processing are
(i)Decimation
(ii)Interpolation
Decimation is a process of reducing the sampling rate by a factor D, i.e., downsampling. Interpolation is a process of increasing the sampling rate by a factor I,
i.e., up-sampling.
19. Define sub band coding of speech.

(APR 2004 ITDSP)

& (NOV 2003 ECEDSP) & (NOV 2005 ECEDSP)
Sub band coding of speech is a method by which the speech signal is
subdivided into several frequency bands and each band is digitally encode
separately. In the case of speech signal processing, most of its energy is
contained in the low frequencies and hence can be coded with more bits then
high frequencies.

20.What is the effect of quantization on pole locations?

(NOV 2004 ITDSP)
N
D(z) = (1-pkz-1)
k=1
pk is the error or perturbation resulting from the quantization of the filter
coefficients
21.What is an anti-imaging filter?
(NOV 2004 ITDSP)
The image signal is due to the aliasing effect. In caseof decimation by M,
there will be M-1 additional images of the input spectrum. Thus, the input
spectrum X() is band limited to the low pass frequency response. An antialiasing filter eliminates the spectrum of X() in the range (/D .
The anti-aliasing filter is LPF whose frequency response HLPF() is given by
HLPF() = 1, || /M
= 0, otherwise.
D Decimator
22.What is a decimator? If the input to the decimator is x(n)={1,2,-1,4,0,5,3,2}, What is the
output?
(NOV 2004 ITDSP)

Decimation is a process of reducing the sampling rate by a factor D, I.e., downsampling.

x(n)={1,2,-1,4,0,5,3,2}
D=2
Output y(n) = {1,-1,0,3}
23.What is dead band?
(Nov/Dec 2004)-ECE
In a limit cycle the amplitude of the output are confined to a range of value,
which is called dead band.
24.How can overflow limit cycles be eliminated?
(Nov/Dec 2004)-ECE
Saturation Arithmetic
Scaling
25.What is meant by finite word length effects in digital filters?
(Nov/Dec 2003)-ECE
The digital implementation of the filter has finite accuracy. When numbers are
represented in digital form, errors are introduced due to their finite accuracy. These
errors generate finite precision effects or finite word length effects.
When multiplication or addition is performed in digital filter, the result is to be
represented by finite word length (bits). Therefore the result is quantized so that it can
be represented by finite word register. This quantization error can create noise or
oscillations in the output. These effects are called finite word length effects.

PART B
UNIT-1 - SIGNALS AND SYSTEMS
1.Determine whether the following signals are Linear ,Time Variant, causal and stable
(1) Y(n)=cos[x(n)]
Nov/Dec 2008 CSE
(2) Y(n)=x(-n+2)
(3) Y(n)=x(2n)
(4) Y(n)=x(n)+nx(n+1)
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.79)
2. Determine the causal signal x(n) having the Z transform
Nov/Dec 2008 CSE
X(z)=
Refer book : Digital signal processing by Ramesh Babu .(Pg no 2.66)
3. Use convolution to find x(n) if X(z) is given by
Nov/Dec 2008 CSE

for ROC
Refer book : Digital signal processing by Ramesh Babu .(Pg no 2.62)

4.Find the response of the system if the input is {1,4,6,2} and impulse response of the
system is {1,2,3,1}
April/May2008CSE
Refer book: Digital signal processing by A.Nagoor kani .(Pg no 23-24)
5.find rxy and r yx for x={1,0,2,3} and y={4,0,1,2}.
CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.79)

April/May2008

6. (i) Check whether the system y(n)=ay(n-1)+x(n) is linear ,casual,

shift variant, and stable
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.51-1.57)
(ii) Find convolution of {5,4,3,2} and {1,0,3,2}

April/May2008 CSE

Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.79)

7. (i) Compute the convolution y(n) of the signals
x(n)=
an, -3n5
0 , elsewhere
and
h (n)=

1, 0n4
0, elsewhere

Nov/Dec 2007 CSE

8.A discrete-time system can be static or dynamic, linear or nonlinear,

Time invariant or time varying, causal or non causal, stable or unstable. Examine
the following system with respect to the properties also.
(1) y(n) = cos [x(n)]
(2) y(n)=x(-n+2)
(3) y(n)=x(2n)
(4) y(n)=x(n).cosWo(n)
Nov/Dec 2007 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.185-1.197)
9.(i) Determine the response of the casual system.
y(n)-y(n-1)=x(n)+x(n-1) to inputs x(n)=u(n) and x(n)=2-n u(n). Test its
stability.
(ii) Determine the IZT of X(z)=1 / [(1-z-1)(1-z-1)2]
Nov/Dec 2007 CSE
Refer book : Digital signal processing by A.Nagoor kani .
(Pg no 463)
10.(i)Determine the Z-transform of the signal x(n)=anu(n)-bnu(-n-1), b>a and plot the
ROC.

Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing

Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd
Edition. Page number (157)
(ii) Find the steady state value given Y(z)={0.5/[(1-0.75z-1)(1-z-1)]}
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd
Edition. Page number (207)
(iii) Find the system function of the system described by
y(n)-0.75y(n-1)+0.125y(n-2)=x(n)-x(n-1) and plot the poles and zeroes of

11.(i) find the convolution and correlation for x(n)={0,1,-2,3,-4} and h(n)={0.5,1,2,1,0.5}.
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.79)
(ii)Determine the Impulse response for the difference equation
Y(n) + 3 y(n-1)+2y(n-2)=2x(n)-x(n-1)
April/May2008 IT
Refer book : Digital signal processing by Ramesh Babu .(Pg no 2.57)
12. (i) Compute the z-transform and hence determine ROC of x(n) where

X (n) =

(1/3) n
(1/2) -n

u(n).n 0

u(n).n<0

Refer book : Digital signal processing by Ramesh Babu .(Pg no 2.20)

(iii)

prove the property that convolution in Z-domains multiplication in time domain

April/May2008 IT
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.77)

13.Find the response of the system if the input is {1,4,6,2} and impulse response of the
system is {1,2,3,1}
April/May2008CSE
Refer book: Digital signal processing by A.Nagoor kani .(Pg no 23-24)
14.find rxy and r yx for x={1,0,2,3} and y={4,0,1,2}.
April/May2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.79)
15.(i) Check whether the system y(n)=ay(n-1)+x(n) is linear ,casual,
shift variant, and stable
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.51-1.57)
(ii) Find convolution of {5,4,3,2} and {1,0,3,2}

April/May2008 CSE

Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.79)

16. (i) Compute the convolution y(n) of the signals

x(n)=
an, -3n5
0 , elsewhere
and
h (n)=

1, 0n4
0, elsewhere

Nov/Dec 2007 CSE

17.A discrete-time system can be static or dynamic, linear or nonlinear,

Time invariant or time varying, causal or non causal, stable or unstable. Examine
the following system with respect to the properties also.
(1) y(n) = cos [x(n)]
(2) y(n)=x(-n+2)
(3) y(n)=x(2n)
(4) y(n)=x(n).cosWo(n)
Nov/Dec 2007 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 1.185-1.197)
18.(i) Determine the response of the casual system.
y(n)-y(n-1)=x(n)+x(n-1) to inputs x(n)=u(n) and x(n)=2-n u(n). Test its
stability.
(ii) Determine the IZT of X(z)=1 / [(1-z-1)(1-z-1)2]
Nov/Dec 2007 CSE
Refer book : Digital signal processing by A.Nagoor kani .
(Pg no 463)
19.(i)Determine the Z-transform of the signal x(n)=anu(n)-bnu(-n-1), b>a and plot the
ROC.
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd
Edition. Page number (157)
(ii) Find the steady state value given Y(z)={0.5/[(1-0.75z-1)(1-z-1)]}
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd
Edition. Page number (207)
(iii) Find the system function of the system described by
y(n)-0.75y(n-1)+0.125y(n-2)=x(n)-x(n-1) and plot the poles and zeroes of
H(z).
(MAY 2006 ITDSP)
Refer signals and systems by P. Ramesh babu , page no:10.65
(To find the impulse response h(n) and take z-transform.)
20.(i)Using Z-transform, compute the response of the system
y(n)=0.7y(n-1)-0.12y(n-2+x9n-1)+x(n-2) to the input x(n)=nu(n). Is the system
stable?
Refer signals and systems by chitode, page no:4.99
(ii)State and prove the properties of convolution sum.
(MAY 2006 ECESS)
Refer signals and systems by chitode, page no:4.43 to 4.45

21.State and prove the sampling theorem. Also explain how reconstruction of original signal
is done from the sampled signal.
(NOV 2006 ECESS)
Refer signals and systems by chitode, page no:3-2 to 3-7
22.Explain the properties of an LTI system.
(NOV 2006 ECESS)
Refer signals and systems by chitode, page no:4.47 to 4.49
23.a. Find the convolution sum for the x(n) =(1/3)-n u(-n-1) and h(n)=u(n-1)
Refer signals and systems by P. Ramesh babu , page no:3.76,3.77
b. Convolve the following two sequences linearly x(n) and h(n) to get y(n).
x(n)= {1,1,1,1} and h(n) ={2,2}.Also give the illustration
Refer signals and systems by chitode, page no:67
c. Explain the properties of convolution.
(NOV2006 ECESS)
Refer signals and systems by chitode, page no:4.43 to 4.45
24. Check whether the following systems are linear or not
1. y(n) = x2(n)
2. y(n) = nx(n)
(APRIL 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd Edition.
Page number (67)
25.(i)Determine the response of the system described by,
y(n)-3y(n-1)-4y(n- 2)=x(n)+2x(n-1) when the input sequence is x(n)=4n u(n).
Refer signals and systems by P. Ramesh babu , page no:3.23
(ii)Write the importance of ROC in Z transform and state the relationship between Z
transforms to Fourier transform.
(APRIL 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd Edition.
Page number (153)
Refer S Poornachandra & B Sasikala, Digital Signal Processing,
Page number (6.10)

UNIT-II - FAST FOURIER TRANSFORMS

1.By means of DFT and IDFT ,Determine the sequence x3(n) corresponding to the circular
convolution of the sequence x1(n)={2,1,2,1}.x2(n)={1,2,3,4}.
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 3.46)
2. State the difference between overlap save method and overlap Add method
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 3.88)
3. Derive the key equation of radix 2 DIF FFT algorithm and draw the relevant flow graph
taking the computation of an 8 point DFT for your illustration
Nov/Dec 2008
CSE
Refer book : Digital signal processing by Nagoor Kani .(Pg no 215)
4. Compute the FFT of the sequence x(n)=n+1 where N=8 using the in place radix 2
decimation in frequency algorithm.
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Nagoor Kani .(Pg no 226)
5. Find DFT for {1,1,2,0,1,2,0,1} using FFT DIT butterfly algorithm and

plot the spectrum

April/May2008

CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 4.17)
6. (i)Find IDFT for {1,4,3,1} using FFT-DIF method
April/May2008
CSE
(ii)Find DFT for {1,2,3,4,1}
(MAY 2006
ITDSP)
Refer book : Digital signal processing by Ramesh Babu .(Pg no 4.29)
7.Compute the eight point DFT of the sequence x(n)={ ,,,,0,0,0,0} using radix2
decimation in time and radix2 decimation in frequency algorithm. Follow exactly the
corresponding signal flow graph and keep track of all the intermediate quantities by
putting them on the diagram.
Nov/Dec 2007 CSE

Refer book : Digital signal processing by Ramesh Babu .(Pg no 4.30)

8.(i) Discuss the properties of DFT.
Refer book : Digital signal processing by S.Poornachandra.,B.sasikala.
(Pg no 749)
(ii)Discuss the use of FFT algorithm in linear filtering.
Nov/Dec 2007
CSE
Refer book : Digital signal processing by John G.Proakis .(Pg no 447)
9.(i) if x(n)

N pt DFT

X(k) then, prove that

X1(n)x2(n)=1/N [Xt(k) X2(k)].

N

April/May2008 IT

Refer book : Digital signal processing by Ramesh Babu .(Pg no 3.34)

(ii) Find 8 Point DFT of x(n)=0.5,0n3 Using DIT FFT
0, 4n7
April/May2008 IT
Refer book : Digital signal processing by Ramesh Babu .(Pg no 4.32)
10.Derive the equation for radix 4 FFT for N=4 and Draw the butterfly Diagram.
April/May2008 IT
11. (i) Compute the 8 pt DFT of the sequence
x(n)={0.5,0.5,0.5,0.5,0,0,0,0} using radix-2 DIT FFT
Refer P. Ramesh babu, Signals and Systems.Page number (8.89)
(ii) Determine the number of complex multiplication and additions involved in a Npoint Radix-2 and Radix-4 FFT algorithm.
(MAY 2006 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing Principles,
Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition. Page number
(456 & 465)
12.Find the 8-pt DFT of the sequence x(n)={1,1,0,0}
(APRIL
2005
ITDSP)
Refer P. Ramesh babu, Signals and Systems. Page number (8.58)
13.Find the 8-pt DFT of the sequence
x(n)= 1, 0n7
0, otherwise
using Decimation-in-time FFT algorithm
(APRIL 2005 ITDSP)
Refer P. Ramesh babu, Signals and Systems.Page number (8.87)
14.Compute the 8 pt DFT of the sequence
x(n)={0.5,0.5,0.5,0.5,0,0,0,0} using DIT FFT
(NOV 2005 ITDSP)
Refer P. Ramesh babu, Signals and Systems.Page number (8.89)

15.By means of DFT and IDFT , determine the response of an FIR filter with impulse
response h(n)={1,2,3},n=0,1,2 to the input sequence x(n) ={1,2,2,1}.
(NOV 2005 ITDSP)
Refer P. Ramesh babu, Signals and Systems.Page number (8.87)
16.(i)Determine the 8 point DFT of the sequence
x(n)= {0,0,1,1,1,0,0,0}
Refer P. Ramesh babu, Signals and Systems.Page number (8.58)
(ii)Find the output sequence y(n) if h(n)={1,1,1} and x(n)={1,2,3,4} using circular
convolution
(APR 2004 ITDSP)
Refer P. Ramesh babu, Signals and Systems.Page number (8.65)
17. (i)What is decimation in frequency algorithm? Write the similarities and differences
between DIT and DIF algorithms.
(APR 2004 ITDSP) & (MAY 2006 ECEDSP)
Refer P. Ramesh babu, Signals and Systems. Page number (8.70-8.80)
18.Determine 8 pt DFT of x (n)=1for -3n3 using DIT-FFT algorithm
(APR 2004
ITDSP)
Refer P. Ramesh babu, Signals and Systems. Page number (8.58)
19.Let X(k) denote the N-point DFT of an N-point sequence x(n).If the DFT of X(k)is
computed to obtain a sequence x1(n). Determine x1(n) in terms of x(n)
(NOV 2004
ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing Principles,
Algorithms and Application, PHI/Pearson Education, 2000, 3rd Edition. Page number (456 &
465)

UNIT-III - IIR FILTER DESIGN

1.Design a digital filter corresponding to an analog filter H(s)=

using the impulse

invariant method to work at a sampling frequency of 100 samples/sec

Nov/Dec 2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no5.40)
2.Determine the direct form I ,direct form II ,Cascade and parallel structure for the system
Y(n)=-0.1y(n-1)+0.72y(n-2)+0.7x(n)-0.25x(n-2)
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no5.61)
3.What is the main drawback of impulse invariant method ?how is this overcome by
bilinear transformation?
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no5.46)
4.Design a digital butter worth filter satisfying the constraints
Nov/Dec 2008 CSE
0.707

1 for 0 w
0.20 for

With T=1 sec using bilinear transformation .realize the same in Direct form II
Refer book : Digital signal processing by Ramesh Babu .(Pg no5.79)
5. (i)Design digital filter with H(s) =
using T=1sec.
(ii)Design a digital filter using bilinear transform for H(s)=2/(s+1)(s+2)with cutoff
frequency as 100 rad/sec and sampling time =1.2 ms
April/May2008
CSE
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 341)
6. (i) Realize the following filter using cascade and parallel form with

direct form I structure

1+z-1 +z -2+ 5z-3
( 1+Z-1)(1+2Z-1+4Z-2)
( ii) Find H(s) for a 3 rd order low pass butter worth filter
April/May2008
CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no 5.8)
7.(i) Derive bilinear transformation for an analog filter with system function
H(s) =b / (s+a)
Refer book: Digital signal processing by John G.Proakis .(Pg no 676-679)
(ii)Design a single pole low pass digital IIR filter with -3 db bandwidth of
0.2 by use of bilinear transformation.
Nov/Dec 2007
CSE

8.(i) Obtain the Direct Form I, Direct Form II, cascade and parallel realization for the
following system Y(n)= -0.1y(n-1)+0.2y(n-2)+3x(n)+3.6x(n-1)+0.6x(n-2)
Refer book : Digital signal processing by Ramesh Babu .(Pg no 5.68)
(ii) Discuss the limitation of designing an IIR filter using impulse
invariant method.
Nov/Dec 2007 CSE
Refer book : Digital signal processing by A.Nagoor kani . (Pg no 330)
9. Design a low pass Butterworth filter that has a 3 dB cut off frequency of 1.5 KHz and an
attenuation of 40 dB at 3.0 kHz
April/May2008 IT
Refer book : Digital signal processing by Ramesh Babu .(Pg no 5.14)
10. (i) Use the Impulse invariance method to design a digital filter from an analog
prototype that has a system function
April/May2008 IT
Ha(s)=s+a/((s+a)2 +b2 )
Refer book : Digital signal processing by Ramesh Babu .(Pg no 5.42)
(ii) Determine the order of Cheybshev filter that meets the following specifications
(1) 1 dB ripple in the pass band 0|w| 0.3 b
(2) Atleast 60 dB attrnuation in the stop band 0.35 |w| Use Bilinear
Transformation
Refer book : Digital signal processing by Ramesh Babu .(Pg no 5.27)
11.(i) Convert the analog filter system functionHa(s)={(s+0.1)/[(s+0.1)2+9]} into a digital IIR
filter using impulse invariance method.(Assume T=0.1sec)
(APR 2006 ECEDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing Principles,
Algorithms and Application, PHI/Pearson Education, 2000, 3rd Edition. Page number
(675)
12.Determine the Direct form II realization for the following system:
y(n)=-0.1y(n-1+0.72y(n-2)+0.7x(n)-0.252x(n-2). (APRIL 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing Principles,
Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition. Page number
(601-7.9b)
13.Explain the method of design of IIR filters using bilinear transform method.

(APRIL 2005 ITDSP)

Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition. Page
number (676-8.3.3)
14.Explain the following terms briefly:
(i)Frequency sampling structures
(ii)Lattice structure for IIR filter
(NOV 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition. Page
number (506 &531)
15.Consider the system described by
y(n)-0.75y(n-1)+0.125y(n-2)=x(n)+0.33x(n-1).
Determine its system function
(NOV 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition. Page
number (601-7.37)
16.Find the output of an LTI system if the input is x(n)=(n+2) for 0n3 and h(n)=a nu(n) for
all n
(APR 2004 ITDSP)
Refer signals and systems by P. Ramesh babu , page no:3.38
17.Obtain cascade form structure of the following system:
y(x)=-0.1y(n-1)+0.2y(n-2)+3x(n)+3.6x(n-1)+0.6x(n-2)
(APR 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition.
Page number (601-7.9c)
18.Verify the Stability and causality of a system with
H(z)=(3-4Z-1)/(1+3.5Z-1+1.5Z-2)
(APR 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd Edition.
Page number (209)

UNIT-IV - FIR FILTER DESIGN

1.Design a FIR linear phase digital filter approximating the ideal frequency response
Nov/Dec 2008 CSE

With T=1 Sec using bilinear transformation .Realize the same in Direct form II
Refer book : Digital signal processing by Nagoor Kani .(Pg no 367)
2.Obtain direct form and cascade form realizations for the transfer function of the system
given by

Nov/Dec 2008
CSE
Refer book : Digital signal processing by Nagoor Kani .(Pg no 78)
3.Explain the type I frequency sampling method of designing an FIR filter.

Nov/Dec 2008
CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no6.82)
4.Compare the frequency domain characteristics of various window functions .Explain how
a linear phase FIR filter can be used using window method.
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no6.28)
5. Design a LPF for the following response .using hamming window with
N=7

April/May2008 CSE
6. (i) Prove that an FIR filter has linear phase if the unit sample response satisfies the
condition h(n)= h(M-1-n), n=0,1,.M-1. Also discuss symmetric and antisymmetric cases
of FIR filter. Nov/Dec 2007
Refer book: Digital signal processing by John G.Proakis .
(Pg no 630-632)
(ii) Explain the need for the use of window sequences in the design of FIR filter. Describe
the window sequences generally used and compare their properties.
Nov/Dec 2007 CSE
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 292-295)
7.(I) Explain the type 1 design of FIR filter using frequency sampling
technique.
Nov/Dec 2007 CSE
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 630-632)
(ii)A low pass filter has the desired response as given below
e-i3w, 0w</2
jw

Hd(e )=
0, /2<
Determine the filter coefficients h(n) for M=7 using frequency sampling
method.
Nov/Dec 2007
CSE
8.(i) For FIR linear phase Digital filter approximating the ideal frequency response
Hd(w) = 1 |w| /6
0 /6 |w|
Determine the coefficients of a 5 tap filter using rectangular Window

Refer book : Digital signal processing by A.Nagoor kani .(Pg no 415

(ii) Determine the unit sample response h(n) of a linear phase FIR filter of Length M=4
for which the frequency response at w=0 and w= /2 is given as Hr(0) ,Hr(/2) =1/2
April/May2008 IT
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 310)
9.(i) Determine the coefficient h(n) of a linear phase FIR filter of length M=5 which has
symmetric unit sample response and frequency response
Hr(k)=1
for k=0,1,2,3
0.4 for k=4
0
for k=5, 6, 7 April/May2008 IT(NOV 2005 ITDSP)
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 308)
m-1
(ii) Show that the equation h(n)=sin (wj-wn)=0,is satisfied for a linear phase FIR filter
n=0
of length 9
April/May2008 IT
10. Design linear HPF using Hanning Window with N=9
H(w) =1
- to Wc and Wc to
=0
otherwise
April/May2008 IT
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 301)
11.Explain in detail about frequency sampling method of designing an FIR filter.
(NOV 2004 ITDSP) & ( NOV 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd
Edition. Page number (630)
12.Explain the steps involved in the design of FIR Linear phase filter using window method.
(APR 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd
Edition. Page number (8.2.2 & 8.2.3)
13.(i)What are the issues in designing FIR filter using window method?
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3rd
Edition. Page number (8.2)
(ii)An FIR filter is given by
y(n)=2x(n)+(4/5)x(n-1)+(3/2)x(n-2)+(2/3)x(n-3) find the lattice structure
coefficients
(APR 2004 ITDSP)
Refer S Poornachandra & B Sasikala, Digital Signal Processing,
Page number (FIR-118)
UNIT-V - FINITE WORD LENGTH EFFECTS
1.Draw the circuit diagram of sample and hold circuit and explain its operation
Nov/Dec 2008 CSE/ Nov/Dec 2007
CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no1.172)

2. The input of the system y(n)=0.99y(n-1)+x(n) is applied to an ADC .what is the power
produced by the quantization noise at the output of the filter if the input is quantized to 8
bits
Nov/Dec 2008
CSE
Refer book : Digital signal processing by Nagoor Kani .(Pg no 423)
3.Discuss the limit cycle in Digital filters
Nov/Dec 2008 CSE
Refer book : Digital signal processing by Nagoor Kani .(Pg no 420)
4.What is vocoder? Explain with a block diagram Nov/Dec 2008 CSE/ Nov/Dec 2007 CSE
Refer book : Digital signal processing by Ramesh Babu .(Pg no10.7)
(ii) Discuss about multirate Signal processing

April/May 2008 CSE

Refer book : Digital signal processing by Ramesh Babu .(Pg no 8.1)

5. (i) Explain how the speech compression is achieved .
(ii) Discuss about quantization noise and derive the equation for
finding quantization noise power.
April/May2008CSE
Refer book : Digital signal processing by Ramesh Babu.(Pg no 7.9-7.14)
6. Two first order low pass filter whose system functions are given below are connected in
cascade. Determine the overall output noise
power. H1(z) = 1/ (1-0.9z-1) and H2(z) = 1/ (1-0.8z-1)
Nov/Dec 2007 CSE

Refer book: Digital signal processing by Ramesh Babu. (Pg no 7.24)

7. Describe the quantization errors that occur in rounding and
truncation in twos complement.
Nov/Dec 2007 CSE
Refer book : Digital signal processing by John G.Proakis .(Pg no 564)
m
8. Explain product quantization and prove err2 = 2oi
April/May2008 IT
i=1
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 412)
9.A cascade Realization of the first order digital filter is shown below ,the system function
of the individual section are H1(z)=1/(1-0.9z-1 ) and H2(z) =1/(1-0.8z-1) .Draw the product
quantization noise model of the system and determine the overall output noise power
April/May2008 IT
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 415)
9. (i) Show dead band effect on y(n) = .95 y(n-1)+x(n) system restricted to 4 bits .Assume
x(0) =0.75 and y(-1)=0
Refer book : Digital signal processing by A.Nagoor kani .(Pg no 423-426)
11. Explain the following terms briefly:
(i)Perturbation error
(ii)Limit cycles
(NOV 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition.
Page number(7.7.1 &7.7.2)
12.(i) Explain clearly the downsampling and up sampling in multirate signal
processing.
(APRIL 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing

Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd

Edition. Page number (784-790)
(ii)Explain subband coding of speech signal
(NOV 2003 ITDSP) & (NOV 2004 ITDSP) & (NOV 2005 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd
Edition. Page number(831-833)
13.(i) Derive the spectrum of the output signal for a decimator
(ii) Find and sketch a two fold expanded signal y(n) for the input
(APR 2004 ITDSP) &(NOV 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd
Edition. Page number (788)
14.(i)Propose a scheme for sampling rate conversion by a rational factor I/D.
(NOV 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd
Edition. Page number (790)
15. Write applications of multirate signal processing in Musical sound processing
(NOV 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition.
Page number (952)
16. With examples illustrate (i) Fixed point addition (ii) Floating point multiplication (iii)
Truncation (iv) Rounding.(APR 2005 ITDSP) & (NOV 2003 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition.
Page number (7.5)
17. Describe a single echo filter using in musical sound processing.
(APRIL 2004 ITDSP)
Refer John G Proakis and Dimtris G Manolakis, Digital Signal Processing
Principles, Algorithms and Application, PHI/Pearson Education, 2000, 3 rd Edition.
Page number (12.5.3)

STAFF INCHARGE

HOD/ECE