Scribd
Upload
294 views

Autocad Plant3d Quick Reference Guide

AutoCAD Plant 3D is software for creating 3D models of process plants. It allows routing pipes between components, adding equipment, and structures. Underlying data is directly exchanged between models, drawings, and documents to ensure consistency. The document provides an overview of concepts and tutorials for getting started with the software.

Uploaded by

ashraf
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
294 views

Autocad Plant3d Quick Reference Guide

AutoCAD Plant 3D is software for creating 3D models of process plants. It allows routing pipes between components, adding equipment, and structures. Underlying data is directly exchanged between models, drawings, and documents to ensure consistency. The document provides an overview of concepts and tutorials for getting started with the software.

Uploaded by

ashraf
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

AutoCAD

Quick Reference Guide

Plant 3D

What is AutoCAD Plant 3D?


AutoCAD Plant 3D is specification-driven software for creating 3D
models of process plant components. You can route pipe, add
equipment and other components, and include support
structures.

The Drawing Window

Getting Started

Understand the User Interface

A Quick Tutorial

Ribbon tabs contain


commands for major tasks

Change display

Help

Within AutoCAD Plant 3D, underlying data is directly exchanged


between the 3D model, P&IDs, isometrics, and orthographics to
ensure that information is consistent and up-to-date.

Concepts & Terms

An overview
Project
Manager

Central hub for all drawings, specs, and data;


you always work within a project

Data
Manager

Table containing all project or drawing data.


You can manipulate this data directly

Part

Piping Component

Placeholder
Part

A component that is temporarily used in the


model until the part is added to the spec

Custom Part

A component that is not in a piping spec

Project.xml

The project file

*.dwg

A Plant 3D model or P&ID drawing

*.dcf

Data cache files; e.g., piping.dcf

*.pspx *.pspc

Spec file (pair)

*.pcat

Catalog file

Navigation

Get around your model

Project Manager
New drawing

Spec Viewer
View a spec and
create a tool palette

Tool Palette

View Cube

Step 1:

Open AutoCAD Plant 3D

Step 2: Create a project drawing


- Project Manager > Plant 3D Drawings > New Drawing
- Enter info > OK
Step 3: Create Structure
- Ribbon > Structure tab:
- Grid > Create
- Settings > member info > Select
- Member > place and align with grid
- Repeat for stairs, ladders, etc.
Step 4: Create Equipment
- Ribbon > Home tab > Create Equipment
- Select component, specify shape and nozzle info
- Create and place in model
Step 5: Route Piping
- Ribbon > Home tab > drop-down lists:
- Line Number
- Spec
- Ribbon > Route Pipe
- Click points in model; press ENTER to finish
Step 6: Insert a Valve or Fitting
- Tool Palette or ribbon > Home tab > Spec Viewer
- Select valve > Insert in Model
- Place in model

Workspace switching

Using the Project Manager

Creating Tool Palettes

You can create new drawings, open existing drawings, link or copy
files to the project folders, and create a project

Tool Palettes are the primary way to place valves and other
fittings in your piping model; click an item in a tool palette and
then click in the model to place it

To create a project drawing:


1. In the Project Manager, right-click Plant 3D Drawings
and click New Drawing
2. In the New DWG dialog box, enter the drawing number,
author, drawing title, and file name
3. Click OK
Quick Tips
- Right-click a node to see a list of useful commands
- Create and organize folders to your project requirements
- To work with referenced drawings, copy or link them here

Quick Tip
- In the Spec Viewer, click Insert in Model, Add to Tool
Palette or Create Tool Palette

Step 7: Create Isometric Drawings


- Ribbon > Isos tab > Create Iso > Production Iso
- Specify project line numbers, Iso type, and output settings
- Create Iso
Step 8: Create Orthographic Drawings
- Ribbon > Home tab > Create Ortho View
- Select ortho drawing > OK
- Select a view, adjust the scale and view extents > OK
- Place view on Ortho drawing

Want More Information?


Q&A Forums:

autodesk.com/autocadexchange-plant
autodesk.com/autocadplant3d-discussion

Online Help:

autodesk.com/autocadplant3d-help

Autodesk Consulting:

autodesk.com/consulting

AutoCAD

Quick Reference Guide

Plant 3D

Routing Pipe

Quick Tips - Routing Shortcut Keys

A general overview
Before Routing Pipe

Size and spec drop-down lists


These panels contain the pipe-routing tools: Part Insertion, Compass,
Elevation & Routing, and Slope.

Line Numbers
- Pipelines are organized by line number
- Line numbers are required when
generating ISOs
- You can set up a separate layer for
each line number, and piping
components are automatically placed
on these layers

Select Specs and Sizes Before Routing


Before routing pipe, you choose its size and spec. The spec controls:
- Connection types (FL, BW, SW, THD, and so on)
- Flange ratings, facings (150# RF, 300#, PN10, and so on)
- Default branch types (tees, stub ins, SOL, WOL, and so on)
- Valve types allowed (Gate, Globe, Check, and so on)
On the ribbon, click Route Pipe to start routing in the model.

Use the Compass


If you use the Continuation
grip, the compass starts by
displaying the elbows
available in the current UCS
plane. It uses the elbows
from the current pipe spec. If
you have
45-degree elbows in your spec, the compass displays them.
Otherwise, the compass displays tick marks at 90 degrees. If you
want to route straight ahead, you can pick a point or enter a distance.

Quick Tips - Using Snaps While Routing


- Use object snap when connecting pipe
- Use Node object snap to connect to open nozzle or piping
ports
- Use the From object snap to place a valve a precise distance
from a fitting

- To remove a selected flanged valve without removing


connecting flanges, press CTRL+Del
- To change the routing plane, press and hold CTRL and
right-click in the drawing area
- To substitute a bolt set, hold CTRL and select the red circle
of a flanged connector
- To orbit the 3D model, press and hold SHIFT+ mouse wheel
- To change the compass plane while routing, press CTRL+
right click

Routing Pipe

A general overview continued

Quick Tips - Pipe & Component Grips


Continuation

Starts or continues routing pipe

Flip

Flips a component in opposite direction

Substitution

Displays a list of components that can be


substituted for the original

Elevation

Moves pipe up/down to set elevation

Move/Stretch

Moves a component; stretches an existing


pipe

Rotate

Displays the compass so you can rotate


the component

Routing Assistant
When you are finishing a pipe route, its often difficult to directly line
up the final connection. A routing assistant is available. You can
connect to an existing component, and then right-click and choose
from multiple possible routes.
Quick Tips:
- To change the plane, press P for Plane, and toggle through
the three orthogonal planes. (You can also press CTRL +
right-click.)
- At any time, you can switch viewports to change a view
direction
- To undo while routing, press U

To Insert Valves at a Precise Distance


1. In the Spec Viewer, in the Spec Sheet, click a valve. Click
Insert in Model.
2. If the insertion point is not located at the desired port, press
CTRL. The port aligns with piping flow, regardless of which
port you use.
3. Hold down SHIFT and right-click in the drawing area, click
From.
4. Hold down SHIFT and right-click in the drawing area, click
Node.
5. Click to specify a point on a fitting.
6. Hold down SHIFT and right-click in the drawing area, click
Nearest.
7. Move your mouse over the header to display the osnap
glyph (do not click). You are now tracking down the pipe.
8. Enter a distance to create the branch (for example: 48).
9. Press ENTER to finish adding values.
Tip: If you see the message No Endpoint found for specified point
when using the Near object snap, you can increase aperture size or
zoom out. To snap correctly, the Nearest osnap glyph must be visible
when the mouse is directly over the pipe center line.

Quick Tips - Routing Right-Click Menus


- To reconnect piping, use Connect Component to Adjacent
from the pipes shortcut menu
- When assigning a line number to piping, first use Append
to Selection > Connected Parts > All Connected Parts
from the pipes shortcut menu

Edit Data in the Data Manager


Make changes to your model data

You can enter, view, edit, and report on information for components
and lines in a drawing. The Data Manager is ideal for viewing and
editing multiple rows of data at one time. You can also export items
to Microsoft Excel and modify data there.

Modeling Equipment

A general overview

With equipment, you have 3 choices:


- Use pre-defined equipment types, such as pumps
- Build equipment using provided shapes
- Build custom equipment from AutoCAD solids or surfaces
Using the Create Equipment dialog, you can set up your equipment by
class (for example: Pump > Centrifugal Pump).
Once equipment has been placed, your can add or change nozzles by
clicking any Add Nozzle grip.

You might also like