Scribd
Upload
404 views

Thread Consumption Guide

The document discusses two methods for calculating thread consumption: measuring actual thread consumed and using thread consumption ratios. It provides tables of thread consumption ratios for various stitch types and average consumption amounts for different garment types to aid in estimating thread needs.

Uploaded by

Ashraf Khan01
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
404 views

Thread Consumption Guide

The document discusses two methods for calculating thread consumption: measuring actual thread consumed and using thread consumption ratios. It provides tables of thread consumption ratios for various stitch types and average consumption amounts for different garment types to aid in estimating thread needs.

Uploaded by

Ashraf Khan01
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

Thread Consumption Guide

Bulletin Post 01

Contents
Measuring actual thread consumed
Using thread consumption ratios
Coats Seamworks (Thread Calculator)
Access Coats Seamworks

Thread Consumption Methods


In todays competitive marketplace, there is a need for tight cost control. A realistic estimation of potential
thread requirements for particular garment styles or contracts will not only end up saving you money, but also
enable you to use a superior thread for the same cost, thereby not compromising on garment quality.
Several factors determine the extent of thread consumption in any sewn product, such as stitch type, seam
type, material thickness, number of layers, construction and SPI (stitches per inch).
However, these factors are not constant with the different style preferences. Hence, thread consumption is
never standard for sewn product categories such as shirts, trousers and footwear.
There are two methods generally used to calculate the amount of thread in a seam and hence the thread
consumption in the sewn product:
By measuring the actual amount of thread consumed
By calculation using thread consumption ratios

1.
2.

1.

Measuring Actual Thread Consumed


A specified length of a given seam is measured and then the thread is pulled out of this length. We can use
the amount pulled out of this specified length to calculate the ratio of thread consumed in the entire seam. By
dividing the amount of thread by the seam length, we get the ratio of thread consumed. If we multiply this
factor times the total length of seam, we can determine the total thread consumed for that seam.
Example:
Length of seam = 100 cm (1 metre)
Stitch class 401 = 2-Thread Chain stitch
Length of seam for which thread is removed = 15 cm
Needle thread removed = 19.5 cm
Needle thread factor = 19.5/15 = 1.3
Looper thread removed = 62.0 cm
Looper thread factor = 62.0/15 = 4.1
Total Needle thread = 100 cm x 1.3 = 130 cm

Total Looper thread = 100 cm x 4.1 = 410 cm


Total thread consumed = 130 + 410 = 540 cm
Add 15% wastage* = 540 cm x 1.15 = 621 cm
*Generally, 10% to 15% wastage of thread is added to the consumption derived. This wastage occurs due to
shop-floor conditions like machine running, thread breakage, repairs, etc. The above example shows the total
thread consumed for one type of stitch class in a garment. By following a similar procedure, you can calculate
the thread consumed for different stitching operations in a garment.

2.

Thread Consumption Ratios


The easier method is to use the generally applicable Thread Consumption Ratios for the various stitch types
that are listed in the table below. By relating these ratios to the length of seams using each stitch type, total
thread consumption can be calculated.

Stitch
Class

Description

Total Thread
Usage (cm per
cm of seam) /
Thread Ratio

No. of
Needle
s

Needle
Thread
%

Looper /
Under (incl.
Cover)
Threads %

301

Lockstitch

2.5

50

50

101

Chainstitch

4.0

100

401

Two Thread
Chain Stitch

5.5

25

75

304

Zigzag
Lockstitch

7.0

50

50

503

Two Thread
Overedge
Stitch

12.0

55

45

504/td
>

Three Thread
Overedge
Stitch

14.0

20

80

512

Four Thread
Mock Safety
Stitch

18.0

25

75

516

Five Thread
Safety Stitch

20.0

20

80

406

Three Thread
Covering Stitch

18.0

30

70

602

Four Thread
Covering Stitch

25.0

20

80

605

Five Thread
Covering Stitch

28.0

30

70

Note:
1.

The above ratios are arrived at with a stitch density of 7 stitches per cm (18 stitches per inch).

2.
3.

These ratios are the prescribed minimum in regular conditions and marginally vary with the factors affecting
thread consumption.
A certain percentage of wastage is to be added to the above ratios as per shop floor conditions. It may vary
from 10% to 15%.

Example:
Length of seam = 100 cm (1 metre)
Stitch class 401 = 2-Thread Chainstitch
From the table, total thread usage per cm of seam = 5.5 cm
Total thread consumption = 100 cm x 5.5 = 550 cm
Estimated Needle thread = 550 x 0.25 = 138 cm
Estimated Looper thread = 550 x 0.75 = 412 cm
Add 15% wastage = 550 cm x 1.15 = 633 cm of thread per seam
By applying thread consumption ratios in a manner similar to the calculation in the above example, a sample
consumption working for an average sized knitted t-shirt is shown in the table below.
Example
Thread consumption for an average-sized knitted t-shirt

Stit
ch

Type

Seam
Length
(m)

Thread
Ratio

Total Thread
Consumption (m)

NT

LT

301

Lockstitch

4.0

2.5

10.0

5.0

5.0

504

Three Thread
Overedge Stitch

3.0

14.0

42.0

8.5

33.
6

401

Two Thread Chain


Stitch

0.75

5.5

4.0

1.0

3.0

503

Two Thread
Overedge Stitch

0.95

12.0

11.4

6.3

5.1

101

One Thread Chain


Stitch

0.10

4.0

0.4

0.4

0.0

Total thread consumed

67.8

21
.1

46.
7

Wastage (15%)

10.0

3.
0

7.0

Stit
ch

Type

Seam
Length
(m)

Thread
Ratio

Total Thread
Consumption (m)

NT

LT

77.8

24
.1

53.
7

Total after considering wastage

These days, thread consumption and costing can be calculated without the need to pick the thread from
seams. Coats' Seamworks is a sewing management software solution that can accurately calculate thread
consumption and costing for a single sewn product or production run or any number of sewing machines.
Seamworks helps to reduce thread wastage and can give you a competitive edge through cost effective
sewing thread procurement. Ask your local Coats contact about Seamworks.
Note: Stitch density, stitch / seam chioce, variations in style, fabric thickness and number of
plies are factors that can affect thread consumption. It is also necessary to make provision for
possible thread wastage (usually 15%) while calculating thread consumption.

Average Thread Consumption


The table below gives the average thread lengths consumed for different types of garments, drawn from our
experience. These figures include 5% wastage allowance:

Item

Consumption (m)

Item

Consumption (m)

Anoraks

210

Pantie girdle

35

Aprons

20

Pantie hose

30

Blouses

100

Raincoats

285

Boiler suit (Chain stitch)


Ladies (pair)
Men (pair)

420
30
35

Shirts
Men
Boys

120
75

Bras

45

Skirts

100

Briefs

Shorts

Item

Consumption (m)

Item

Consumption (m)

Children
Ladies / Men

35
70

Children
Sports

35
70

Caps
Children
Men

75
90

Slacks
Ladies
Children

160
130

Corsets

95

Swimwear: Ladies

75

Dresses
Children
Ladies

90
195

Suits
Ladies
Men - 2 piece

365
480

Dressing gowns
Children
Men

165
250

Ties

Handkerchiefs

Track suits

160

Housecoats

185

Trousers: Men

270

Jackets: Men

200

T-shirts

100

Jeans: Men

210

Under pants

50

Nightdresses
Children
Ladies

55
100

Under slips
Full length
Waist

75
40

T-shirts (basic) / Vests

50

Waistcoats

50

Coats Seamworks

Apart from the two regular


methods that are used, there is a quick, simple and efficient option available to our customers called Coats

Seamworks. Using this software, it is possible to calculate thread consumption metering and costing without
having to pick up the thread from the seam.
Seamworks is a sewing management software solution that can calculate thread consumption for any sewn
product.
Not only does it calculate the consumption for a single product, it also enables you to choose the right thread
ordering pattern, which is necessary for optimal usage of the ordered thread in the shop floor.

Salient features:
Easy-to-use familiar Explorer-type interface
Support for metric and imperial measurement systems
Increased data integrity
Enhanced calculation engine
Multi-lingual support

Coats Technical Services


Sewing engineers at Coats can help you with precise metering of the actual thread consumption
for your garments. They can provide valuable information for design, cost accounting, inventory
planning and logistics.

You might also like