RUGGEDI Z E D R J 4 5 A N D U S B

SUPERSEAL

MIL-DTL-38999 T YPE SERIES 80 MIGHT Y MOUSE MIL-DTL-5015 T YPE

APRIL 2013

RUGGEDIZED
RJ45 AND USB
CONNECTORS

SUPERSEAL

Glenair introduces the worlds most comprehensive line of

ruggedized RJ45 Ethernet and USB connectors in D38999
type, 5015 type and Series 80 Mighty Mouse packaging

Features
Superior sealingIP68 when matedfor complete system protection against
water, sand and dust

Shielded/grounded coupler designs in both receptacle and plug connectors

Crimp, solder-cup, PC tail, and Quadrax contact/wire termination options
RJ45 plug and/or jack interface options available in Cat 5e or Cat 6a in D38999
type and 5015 type packaging

USB 2.0 and 3.0 in Series 80 Mighty Mouse and D38999 type
Intermateable, one-to-one equivalent solutions for other
industry-standard commercial data interface
field-duty connectors

Glenair, Inc.
1211 Air Way
Glendale, CA
91201-2497
818-247-6000
[email protected]
www.glenair.com

SuperSeal
Connectors

Ruggedized RJ45 and USB SuperSeal Connectors

Table of Contents

2013 Glenair, Inc.

SuperSeal MIL-DTL-38999 Type RJ45 Connectors

SuperSeal MIL-DTL-5015 Type Reverse-Bayonet RJ45 Connectors

SuperSeal MIL-DTL-38999 Type USB Connectors

SuperSeal Series 80 Mighty Mouse USB Connectors

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

E-Mail: [email protected]

MIL-DTL-38999 TYPE
FIELD-READY
RJ45 ETHERNET

M I L - DT L - 3 8 9 9 9 T Y P E

SUPERSEAL

Rugged environmental MIL-DTL-38999 type

connectors with IP68 sealing, robust insert-toshell grounding, and a complete range of wire,
cable, and circuit board terminations

Features

Superior sealingIP68 when matedfor complete system protection against

water, sand and dust

Highly durable RJ45 design, including enhanced operating temperature, increased

life-cycle, and rugged vibration and shock performance

Shielded/grounded coupler designs in both receptacle and plug connectors

Crimp, solder-cup, PC tail, and Quadrax contact/wire termination options
RJ45 plug and/or jack interface options available in Cat 5e or Cat 6a
Industry standard scoop proof, self-locking, triple-start
threaded coupling design of MIL-DTL-38999 Series III type
connectors

Intermateable with other MIL-DTL-38999 type

RJ45 field-duty connectors

Glenair, Inc.
1211 Air Way
Glendale, CA
91201-2497
818-247-6000
[email protected]
www.glenair.com

D38999 Type
RJ45 Connectors

SuperSeal MIL-DTL-38999 Series III Type Connectors

RJ45 Ethernet

Product Selection Guide

233-300
SuperSeal MIL-DTL-38999 Series III Type Connector/
Adapter with RJ45 Jack/Jack or Plug/Jack Couplers

233-301
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack or Plug to Rear Crimp Contact
Termination

233-302
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack to PC Tail Termination

233-303
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack to Rear Solder Cup Termination

233-304
SuperSeal MIL-DTL-38999 Series III Type Connectors
with Pin or Socket Contacts to RJ45 Jack or Plug
Interface

233-305
SuperSeal MIL-DTL-38999 Series III Type Connectors
with Pin or Socket Quadrax to RJ45 Jack or Plug

233-330
SuperSeal MIL-DTL-38999 Series III Type
Feedthrough Receptacle with RJ45 Jack to Jack Coupler

2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-1

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

SuperSeal MIL-DTL-38999 Series III Type Connectors

Materials and Performance Specifications
Material and Finishes:

Shell/coupling High strength aluminum alloy

Plating Cadmium olive drab over electroless nickel; Nickel PTFE; Electroless nickel
Contacts PC tails, solder cup, and crimp contacts: Copper alloy, gold plated
RJ45 coupler housing PPS
Seals Silicon-based elastomer
Composite, stainless steel and other materials and finishes available. Please consult factory.

Shell Type and Sizes:

Shell Type D38999 Series III Type

Sizes Shell sizes 17 and 19

Electrical Specifications:

Voltage Rating 1000 Volts, Cat 5e and Cat 6a

Data Rate 10BASE-T, 100BASE-TX, 1000BASE-T/1000BASE-TX and 10GBASE-T (Cat 6a only)
Current Rating 1.5 Amps, Cat5e and Cat 6a
D.W.V. 1000 VAC
Frequency 100 MHz, Cat 5e 500 MHz, Cat 6a
Wiring Straight through, Cat 5e and Cat 6a
Shield Continuity Continuous through coupler and grounded to shell (Grounding through
coupler only available for Cat5e, consult factory)

Environmental / Mechanical Performance

Sealing IP68 mated condition

Outgassing UL94 V0 low smoke, zero halogen
Operating Temperature Range -40C to +125C
Vibration 20gs, 3 Axis, 10 - 500 Hz
Mechanical Shock 300 gs
Backshell Interface MIL-DTL-38999 connector designator H
Mating Cycles 500

Options:

Metal gland backshell, round mounting holes, self-locking clinch nuts, plug-and-play cordsets,
self-closing spring-loaded cover or anti-decoupling covers (receptacle only), integral shrink boot
adapter and low-temp shrink boot (plug only).
Electrical Specifications for
RJ45 Cat 5e and Cat 6a
MIL-DTL-38999 Series III type

Panel Cut-Out Dimensions

Shell
Size

T Dia
Min

U Dia
Min

V Holes

17

1.219 (30.96) 1.016 (25.81)

19

1.297 (32.94) 1.141 (28.98)

.133 (3.38)
.123 (3.12)

X
Dia

Y
Flat

1.062 (26.97)

1.270 (32.26) 1.210 (30.73)

1.260 (32.00) 1.208 (30.68)

Rating

Cat 5e

Cat 6a

Voltage Rating

1000 Volts

1000 Volts

1.156 (29.36)

1.395 (35.43) 1.335 (33.91)

1.385 (35.18) 1.333 (33.86)

Data Rate

4x V Holes
.005

Current Rating

2x W

2x W

Frequency
Wiring
Y
Flat

Cabling length

Back Panel
Mounting

T Min

Front Panel
Mounting

Square Flange Mount

Recommended Mounting Holes
Panel Thickness .288 (7.32) Max
2013 Glenair, Inc.

Shield continuity

U Min

10BASE-T, 100BASE-TX,
1000BASE-T/1000BASE-TX AND 10GBASE-T*
(10GBASE-T Cat 6a Only)
1.5 Amps

1.5 Amps

100 MHz

500 MHz

Straight Through

Straight Through

Continous Through Coupler

and Grounded to the Shell*

Continous Through
Coupler and Grounded
to the Shell

100 Meters

100 Meters

*Grounding through coupler only available for Cat5e. Consult factory

Jam Nut Mount

Recommended Panel Cut-Out
Panel Thickness .126 - .062 (3.2 - 1.6)
U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-2

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

M39029/58-360 and M39029/56-348

850-002-22-360 and 850-001-22-348

Standard Duty Electrical Pin and Socket Contacts

SIZE #22 PIN AND SOCKET CONTACTS FOR USE WITH SUPERSEAL 233-304 AND 233-301
CONNECTORS
Mating End
Wire
Size
Accomodation

Pin
Socket

22
22

Pin Contact

.062
.060

.048
.046

.531
Ref

Black
Blue
Orange

H x 45

Glenair Part Number

M39029/58-360
M39029/56-348

850-002-22-360
850-001-22-348

22-28 AWG
22-28 AWG

.237
.231

Color Bands

Military Part Number

.300
.295
.0305
.0295

.033
.029

Flat
.011 Max

.0355
.0335
Manufacturer
Symbol

.022
.018
Thru One Side Only
.141

.129
.122

.237
.231

Rad
.020
.010
.010 Typ
.004
.041
.036

60
Typ

Socket Contact
.855 (Ref)

.237
.231

.626/.616
.585 Min.
.033
.029

.166 Min
Mfgr. Symbol

.010 Typ
.004

.005 x 45
.003
.0355 .048 .062
.0335 .046 .060

50/44

-22-360 Only

Color Bands

Gray
Yellow
Orange

.062 .047 .031

.040
.030

.022
.018
Thru One Side Only
.141

.041
.036
.040
.030

60
Typ

.129
.122

-22-348 Only

Termination Tools
Size
22

Part Number
.

Military Number

AWG
Handling

Crimp Tool

Positioner

Insertion Tool

Extraction Tool

Pin

850-002-22-360

M39029/58-360

22, 24, 26,

28

M22520/2-01
M22520/7-01

M22520/2-09
M22520//7-07

M81969/14-01
M81969/8-01

M81969/14-01
M81969/8-02

Socket

850-001-22-348

M39029/56-348

22, 24, 26,

28

M22520/2-01
M22520/7-01

M22520/2-07
M22520//7-05

M81969/14-01
M81969/8-01

M81969/14-01
M81969/8-02

2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-3

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

SuperSeal MIL-DTL-38999 Series III Type Connectors

Contacts and Tools
Size #22 Crimp Contact Instructions

HOW TO TERMINATE, INSTALL AND REMOVE SIZE #22 CONTACTS

Set Up Crimp Tool. Install proper positioner into

crimp tool. The label on the positioner shows
the proper tool setting for each wire size. Turn the
adjustment wheel to the correct setting.

A 2

Strip Wire. Remove wire insulation, taking care

to avoid nicking or cutting wire strands. Strip
wire to length shown.

Adjustment Wheel
.145/.155
(3.68/3.94)

1
Crimp Tool

Insert wire into contact. The wire should be

visible in the inspection hole.

Insert contact into crimp tool as shown. Make

sure that the contact is fully inserted into
the tool. Squeeze handle completely. The ratchet
mechanism will not allow a partial crimp. Release
handle and remove contact.

Positioner
INSPECTION
HOLE

Inspect crimped contact. Wire should be fully

inserted and the crimp should be uniform in
appearance.

Insertion/Extraction Tool M81969/14-01

EXTRACTION TIP
WHITE END

INSERTION TIP
BLUE END

Install contact into connector. Push the contact

through the rear grommet until the contact
locks into place. This can usually be done by hand
without the need for a tool. If the wire gage is #26
or smaller, a tool is helpful. There are two techniques
for installing contacts with a tool. One method is to
push the contact in by hand, then use the tool to
finish the insertion. The other method is to position
the insertion tip against the contact shoulder,
then insert the contact. Use insertion/extraction
tool 809-088 to install contacts. Slide the wire into
the groove on the blue end of the tool. Slide the
tool tip up the contact until it touches the contact
shoulder. USE CARE TO AVOID DAMAGING THE
CONNECTOR.

CONTACT
RETAINER CLIP

RUBBER
GROMMET

Contact Extraction. Use tool M81969/14-01. The

white end is used for contact extraction. First,
push the wire into the groove of the metal tip. Slide
the tip of the tool into the connector. Push the tool
into the connector cavity until the tip bottoms in the
connector. Avoid wiggling or rocking the tip. This may
damage the cavity. A straight push is best. Pinch the
wire between your finger and the white plastic grip
and slide the tool and contact out of the connector.
Wire insulation diameter greater than 0.045 inches
(1.14mm) is too large to work properly with the
extraction tool. connector damage is possible.

2013 Glenair, Inc.

RETAINER
TINE

RUBBER
GROMMET

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-4

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-300
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack/Jack or Plug/Jack Couplers

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-300

Connector
Style
(See Below)

NF 00

Insert-to-Shell Grounding
G = Insert grounded to shell
(for use with shielded
cable)

Basic
Number

Shell Size
17 or 19

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal
Shrink Boot

17 6A

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp

RJ45 Orientation
Option
1, 2, 3, or 4
1.750 Max
(44.45)

Connector Styles

Receptacle
Front View

Receptacle
Rear View

Plug
Front View

00 = Square Flange Receptacle

with Slotted Holes
01 = Square Flange Receptacle with
Metal Cable Gland
07 = Jam Nut Receptacle
05 = In-Line Receptacle
08 = In-Line Receptacle with
Metal Cable Gland
G6 = Plug
G7 = Plug with Metal Cable Gland
1.600 (40.64)
Max
.823
.768
(20.90)
(19.51)

.280 (7.11)
Min. Full Thd

RJ45 Orientation Options

(Plug Face)

Code 1

Code 4

1.600 (40.64) Max

.890 (22.61)
Max

.579 (14.71)
.555 (14.10)

17
19

B
Dia

C Thread

1.406 (35.71)

.928/.922
23.57/23.42

M25 X 1.0-6g 0.100R

1.156 (29.36)

1.033/1.027
26.24/26.09

M25 X 1.0-6g 0.100R

2013 Glenair, Inc.

2.700 (68.58)
Max

.823
.768
(20.90)
(19.51)

Metal Gland

1.600 (40.64)
Max

.823
.768
(20.90)
(19.51)

.280 (7.11)
Min. Full Thd

Plug Dimensions

A Dia
Max

C Thread

Plug with
Male RJ45 Module

Square Flange Receptacle

with and without cable sealing gland

All External Dimensions, Features, etc.

compliant with D38999/20, /24 & /26.
Consult Factory for Additional Information
Shell
Size

A Max
B

.098 (2.49)
.083 (2.11)

Code 2

Code 3

Part No. 770-028

(Omit for None)

Jam Nut Receptacle

U.S. CAGE Code 06324

Inline Receptacle
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-5

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-301
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack or Plug to
Rear Crimp Contact Termination

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-301
Basic
Number

Connector
Style

Shell Size
17 or 19

(See Below)

NF 00

17 6A

Insert-to-Shell Grounding
G = Insert grounded to shell
(for use with shielded
cable)

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

T
Shrink Boot

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp

Part No. 770-028

(Omit for None)
All External Dimensions, Features, etc.
compliant with D38999/20, /24 & /26.
Consult Factory for Additional Information

Connector Styles
00 = Square Flange Receptacle
with Slotted Holes
07 = Jam Nut Receptacle
05 = In-Line Receptacle
G6 = Plug

Plug Dimensions

Shell
Size

A Dia
Max

B
Dia

C Thread

17

1.406 (35.71)

.928/.922
23.57/23.42

M25 X 1.0-6g 0.100R

1.156 (29.36)

1.033/1.027
26.24/26.09

M25 X 1.0-6g 0.100R

19

1.810 (45.72)
(45.97) Max
1.800
.823 (20.90)
.768 (19.51)

Receptacle
Front View

Receptacle
Rear View

.280 Min.
(7.11)
Full Thd.

Cat5e

Receptacle
Front View
1.810(45.72)
(45.97) Max
1.800
.890 (22.61)
Max
.579 (14.71)
.555 (14.10)
.280 (7.11)

Min. Full Thd.

.098 (2.49)
.083 (2.11)

Square Flange Mount Receptacle

82

5
4

Receptacle
Rear View Size
#22 Crimp

1.810
1.800 (45.97)
(45.72) Max

1.810 (45.97) Max

.823 (20.90)
.280 Min.
(7.11)
.768 (19.51)
Full Thd.
A Max

.098 (2.49)
.083 (2.11)

Jam Nut Receptacle

2013 Glenair, Inc.

Inline Receptacle
U.S. CAGE Code 06324

C Thread

Plug Connector
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-6

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-302
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack to PC Tail Termination

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-302
Basic
Number

Connector
Style

Shell Size
17 or 19

(See Below)

NF 00

Insert-to-Shell Grounding
G = Insert grounded to shell
(for use with shielded
cable)

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

17 5L

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp
Connector Styles

.890 (22.61)
Max
.579 (14.71)
.555 (14.10)

Receptacle
Front View

00 = Square Flange Receptacle

with Slotted Holes
07 = Jam Nut Receptacle

8x .135 .014
(3.43 0.36)

.020 (0.51)
8x .015 (0.38)

Receptacle
Rear View

.080 Typ

.020
4x .080

4x .030

8x .030

Jam Nut
Receptacle

2x .060

.117

.055
.005
.155 +/ .005
(3.94+/ 0.13)
1.39
0.127

.514

Recommended PCB Layout

(Solder Side Of Board)

2 x .155.014
(3.94 0.36)

.823 (20.90)
.768 (19.51)

.098 (2.49)
.083 (2.11)
8x .135 .014
(3.43 0.36)
.020 (0.51)
8x .015 (0.38)
71

2 x .155 .014
(3.94 0.36)

Receptacle
Front View
2013 Glenair, Inc.

.155 .005
(3.94 0.13)

Square Flange Receptacle

U.S. CAGE Code 06324

71
2

Receptacle
Rear View
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-7

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-303
SuperSeal MIL-DTL-38999 Series III Type Connectors
with RJ45 Jack to Solder Cup Wire Termination

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-303
Basic
Number

Connector
Style
(See Below)

NF 00

Insert-to-Shell Grounding
G = Insert grounded to shell
(for use with shielded
cable)

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

Shell Size
17 or 19

17 5L

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp
Connector Styles
00 = Square Flange Receptacle
with Slotted Holes
07 = Jam Nut Receptacle

.890 (22.61
Max
Receptacle
Front View

.579 (14.71)
.555 (14.10)

Receptacle
Rear View

.080 Typ

.020
4x .080

4x .030

10 x .150 .025
(3.81 .0.64)

8x .030

2x .060

.117

Jam Nut
Receptacle

.514

Recommended PCB Layout

(Solder Side Of Board)

.823 (20.90)
.768 (19.51)

.400 (10.16) Max

.098 (2.49)
.083 (2.11)
7
8

Receptacle
Front View
2013 Glenair, Inc.

10x .150 .025

(3.81 0.64)
.400 (10.16) Max

Square Flange Receptacle

U.S. CAGE Code 06324

1
2

Receptacle
Rear View
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-8

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-304
SuperSeal MIL-DTL-38999 Series III Type Connectors
with Pin or Socket Contacts to RJ45 Jack or Plug

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-304

(See Below)

NF 00 17 - 35

Basic
Number

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

Insert
Arrangement
17 - 35
Per MIL-STD-1560

Connector
Style

Shell Size
17 or 19

P = Pin
S = Socket

5L

Receptacle
Rear View

00 = Square Flange
Receptacle
with Slotted Holes
07 = Jam Nut Receptacle
05 = In-Line Receptacle
G6 = Plug

P1 (Connector Interface)

40
47
25
17

Plug Dimensions

Shell
Size

A Dia
Max

B
Dia

C Thread

17

1.406 (35.71)

.928/.922
(23.57/23.42)

M25 X 1.0-6g 0.100R

1.156 (29.36)

1.033/1.027
(26.24/26.09)

19

M25 X 1.0-6g 0.100R

26 AWG

ORN

26 AWG

WHT/GRN

26 AWG

GRN

26 AWG

BLU

26 AWG

WHT/BLU

26 AWG

WHT/BRN

26 AWG

BRN

26 AWG

P1 (Connector Interface)

40
47

29
37

Square Flange Receptacle

WHT/ORN

PINN
1

P2 ( RJ45 FEMALE)
AME DISCREPTION
TX+
TRANSMIT DATA+

TX-

TRANSMIT DATA-

RX+

RECIEVE DATA+

RX-

RECIEVE DATA-

4 NOT USED NOT CONNECTED

5 NOT USED NOT CONNECTED
7 NOT USED NOT CONNECTED
8 NOT USED NOT CONNECTED

WIRING DIAGRAM
For Ethernet 1000Base-T (Gigabit Ethernet)
(Color Codes per EIA/TIA 568B)

25
17

.098 (2.49)
.083 (2.11)

.280 (7.11)
Min. Full Thd.

Connector Styles

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp

1.800 (45.72) Max

.823 (20.90)
.280 (7.11)
.768 (19.51)
Min. Full Thd.

1.800 (45.72) Max

WIRING DIAGRAM
For Ethernet 10Base-T & 100 Base-TX
(Color Codes per EIA/TIA 568B)

Receptacle
Front View

.890 (22.61)
Max
.579 (14.71)
.555 (14.10)

Shrink Boot
Part No. 770-028
(Omit for None)

10
4

1.800 (45.72) Max

.823 (20.90)
.280 (7.11)
.768 (19.51)
Min. Full Thd.

WHT/ORN

26 AWG

ORN

26 AWG

WHT/GRN

26 AWG

GRN

26 AWG

BLU

26 AWG

WHT/BLU

26 AWG

WHT/BRN

26 AWG

BRN

26 AWG

P2 ( RJ45 FEMALE)
PINN AME DISCREPTION
1 BI_DA+ BI-DIRECTIONAL A+
2

BI_DA-

BI-DIRECTIONAL A-

BI_DB+

BI-DIRECTIONAL B-

BI_DB-

BI-DIRECTIONAL B-

BI_DC+

BI-DIRECTIONAL C+

BI_DC-

BI-DIRECTIONAL C-

BI_DD+

BI-DIRECTIONAL D+

BI_DD-

BI-DIRECTIONAL D-

1.800 (45.72) Max

A Max
B

.098 (2.49)
.083 (2.11)

Jam Nut
2013 Glenair, Inc.

Inline
U.S. CAGE Code 06324

C Thread
Plug
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-9

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-305
SuperSeal MIL-DTL-38999 Series III Type Connectors
with Pin or Socket Quadrax to RJ45 Jack or Plug

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-305
Basic
Number

Connector
Style

Shell Size
17 or 19

(See Below)

NF 00

P = Pin
S = Socket

17 5L

Insert-to-Shell Grounding
G = Insert grounded to shell
(for use with shielded
cable)

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp

Shrink Boot
Part No. 770-028
(Omit for None)
Connector Styles

00 = Square Flange Receptacle

with Slotted Holes
07 = Jam Nut Receptacle
05 = Inline Receptacle
G6 = Plug Connector
WIRING DIAGRAM
For Ethernet 10Base-T & 100 Base-TX
(Color Codes per EIA/TIA 568B)

P1 (Connector Interface)
Quadrax Center Contacts 1, 2, 3 and 4

Receptacle
Rear View

Receptacle
Front View

2.200(45.72)
(55.88) Max
1.800
Max
.823 (22.17)
.768 (19.51)

WHT/ORN

1
2

Pin 2

ORN
WHT/GRN

3
4

Pin 1

GRN
BLU

17
19

1.406 (35.71)
1.156 (29.36)

B
Dia
.928/.922
(23.57/23.42)
1.033/1.027
(26.24/26.09)

TRANSMIT DATA-

RX+

RECIEVE DATA+

RX-

RECIEVE DATA-

8 NOT USED NOT CONNECTED

WIRING DIAGRAM
For Ethernet 1000Base-T (Gigabit Ethernet)
(Color Codes per EIA/TIA 568B)

Plug Dimensions

A Dia
Max

TX-

7 NOT USED NOT CONNECTED

BRN

Quadrax Pin Locations

Shell
Size

2
3

5 NOT USED NOT CONNECTED

WHT/BRN

Pin 4

P2 ( RJ45 FEMALE)
PINN AME DISCREPTION
1 BI_DA+
BI-DIRECTIONAL A+

P1 (Connector Interface)

C Thread
M25 X 1.0-6g 0.100R
M25 X 1.0-6g 0.100R

Square Flange

P2 ( RJ45 FEMALE)
AME DISCREPTION
TX+
TRANSMIT DATA+

4 NOT USED NOT CONNECTED

WHT/BLU

Pin 3

PINN
1

WHT/ORN

A
B

ORN

WHT/GRN

3
4
1
2

GRN
BLU
WHT/BLU
WHT/BRN

3
4

BRN

BI_DA-

BI-DIRECTIONAL A-

BI_DB+

BI-DIRECTIONAL B-

BI_DB-

BI-DIRECTIONAL B-

BI_DC+

BI-DIRECTIONAL C+

BI_DC-

BI-DIRECTIONAL C-

BI_DD+

BI-DIRECTIONAL D+

BI_DD-

BI-DIRECTIONAL D-

2.200 (45.72)
(55.88) Max
1.800
Max

.890 (22.61)
Max
.579 (14.71)
.555 (14.10)

.280 (7.11)
Min. Full Thd.

2.200 (45.72)
(55.88) Max
1.800
Max

.823 (22.17)
.768 (19.51)

2.200 (45.72)
(55.88) Max
1.800
Max

A
Max
B

C Thread

Jam Nut
2013 Glenair, Inc.

Inline
U.S. CAGE Code 06324

Plug
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-10

E-Mail: [email protected]

D38999 Type
RJ45 Connectors

233-330
SuperSeal MIL-DTL-38999 Series III Type
Bulkhead Feedthru
with Back-to-Back RJ45 Jacks
Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

233-330
Basic
Number

5H = Cat5e, High Temp

6A = Cat6a, High Temp
5L = Cat5e, Low Temp

Shell Size
17

NF 00 - 17 6H N
Connector Styles
00 = Square Flange
Receptacle
with Slotted Holes
07 = Jam Nut Receptacle

1.750 (44.45) Max

.650 (16.51)
.098 (2.49)
.088 (2.24)
.600 (15.24)

.063/.250
(1.60/6.35)
Square Flange Mount
Receptacle
Feed Through Connector

RJ45 Orientation
Option
1, 2, 3 or 4

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

.579 (14.71)
.555 (14.10)

1.750 (44.45) Max

.890 (22.61)
Max

.122 (3.10)
.083 (2.11)
.250 (6.35) Max
Jam Nut Mount
Receptacle
Feed Through Connector

RJ45 Orientation Options

Partial Front Views Shown

Code 1

Code 2

Code 3

Code 4

All External Dimensions, Features, etc. compliant with D38999/20, /24 & /26.
Consult Factory for Additional Information
2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

A-11

E-Mail: [email protected]

RUGGEDIZED
SERIES ITS
REVERSE-BAYONET
RJ45

M I L - DT L - 5 01 5 T Y P E R E V E R S E - B AYONET

SUPERSEAL

Harsh-environment RJ45 data transmission

connectors. High-reliability performance for
military vehicle and rail applications

Features
Ruggedized MIL-DTL-5015 type connectors for heavy-duty industrial and
transportation applications
Reverse-bayonet coupling for fast, reliable mating in hard-to-reach locations
Superior sealingIP68 when matedfor complete harsh-environment protection
Crimp contact termination or pigtail cables
Available backshells for strain-relief and environmental
protection
Integrated RJ45 plugs and jacks for Cat 5e
high-speed data transmission

Glenair, Inc.
1211 Air Way
Glendale, CA
91201-2497
818-247-6000
[email protected]
www.glenair.com

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal MIL-DTL-5015 Type

Reverse-Bayonet Connectors
RJ45 Ethernet
Product Selection Guide

SuperSeal 5015 Reverse Bayonet Plug

with Cat 5e RJ45 Plug and
Rear Crimp Contact Termination

SuperSeal 5015 Reverse Bayonet Plug

with Cat 5e RJ45 Plug and
Pre-Terminated Pigtail

SuperSeal 5015 Reverse Bayonet Receptacle

with Cat 5e RJ45 Jack and Pre-Terminated Pigtail

SuperSeal 5015 Reverse Bayonet Receptacle

with Cat 5e RJ45 Jack and PCB Termination

SuperSeal 5015 Reverse Bayonet Receptacles

with Cat 5e RJ45 Jack/Jack Couplers

SuperSeal Reverse Bayonet RJ45 Connectors

MIL-DTL-5015 Type Size 18 Cat5e
Available Pigtail Configurations and Backshell Options

2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-1

E-Mail: [email protected]

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal Reverse Bayonet RJ45 Connectors

MIL-DTL-5015 Type Size 18 Cat5e
Introduction

Material and Finishes:

Shell/coupling High strength aluminum alloy
Plating Electroless Nickel, Cad Olive Drab, Black Zinc Cobalt or Standard black
electrodeposited paint
Bronze, stainless steel and other materials and finishes available. Please consult factory.

Shell Type and Sizes:

Shell Type MIL-DTL-5015 Reverse-Bayonet Type
Sizes Shell size 18

Connector Styles:
Receptacle MIL-DTL-5015 type in shell size 18 with integrated
RJ45 jack/jack or jack/PCB coupler available in Cat 5e
Plug MIL-DTL-5015 type plug in shell size 18 with integrated
RJ45 plug/jack coupler available in Cat 5e
Receptacles and connectors available in square flange front or rear wall mount with slotted or round holes, jam
nut front or rear wall mount, in-line, and feedthrough configurations.

Technical Characteristics:
Category Cat 5e
Connection 10BASE-T, 100BASE-TX, 1000BASE-T
Max Current Rating 1.5 Amps at 20 C
Dielectrc Withstanding Voltage 1000 volts
Working Temperature -40 to +85 C
Environmental Rating IP67 unmated

Termination Options:
Innovative crimp contact termination, printed circuit board termination, pre-terminated
pigtails and jack/jack and jack/plug RJ45 configurations

Test
Description

Procedure Per
MIL-DTL-5015 and
or other standard

SuperSeal MIL-DTL-5015 RJ45

Performance Requirements / Specifications

Fluid Resistance

Per EIA-364-10 unmated connector shall not experience any damage detrimental to performance after immersion in fluid.

4.5.30 IAW EIA-364-10

Contact
Resistance
Insulation
Resistance

Connecting hardware shall conform to A.2; a thru c of TIA/EIA-568-B.2 per IEC 60512-2, Test Method 2A, millivolt level method (shall not
exceed 0.025 ohms and 0.050 ohms during subsequent tests

TIA/EIA-568-B.2, Section A.2

IAW IEC 60512-2, Test method 2A

Per IEC 60512-2, Test 3a, Method C, test voltage 500 VDC (Insulation Resistance minimum of 100 Ohm)

IAW IEC 60512-2, Test Method 2A

Mating
Durability

500 to 1000 cycles (finish dependent) with no mechanical damage. Contact Resistance requirement as described above shall be met at
0.050 ohms after 100, 200 and 250 cycles (and 500 per finish). This shall be performed before Thermal Shock and Humidity/ Temperature
cycling test and the additional 250 cycles shall be testing after completion in the same manner.

4.5.8
IAW TIA/EIA-568-B.2

Contact
Retention

Individual contacts capable of withstanding at least 10 pounds axial load applied uniformly 1 lb/sec

IAW EIA-364-29

Per MIL-DTL-38999 Series III Condition VI Letter J; Sine: 10 to 2,000 Hz each of three mutually perpendicular axis total of 36 hours (4 hours
each ambient, -40C and +85C temperatures) Random: 43.9 rms gs random vibration 16 hours (8 hours longitudinal and perpendicular
direction). No electrical discontinuity.
100 mA max with no discontinuities excess of 1 microsecond. Standard: Per EIA-364-27 half sine wave @ 300 G. High Impact: Per MIL
S 901, Grade A.
Per IEC 60068-2-14 Test Number Nb. Temperature range -40 - +85C 2C Exposure Time: 30 min. Number of Cycles: 100 Test Group
B contacts shall be inspected and contact resistance measured after 50 cycles and at completion of est. These specimens shall be used for
humidity/thermal cycling testing.

3.27
Sine 4.5.23.3 & 4.5.23.4
Random 4.5.23.1 IAW EIA-364-28
4.5 IAW EIA-364-27
IAW MIL S 901

Humidity/
Temperature
Cycling

EIA-364-31 with exceptions b, d & e; EIA 364-32 Test Condition A, except steps 2 & 4 shall be 2 minutes max duration; Humidity/
Temperature: TIA/EIA-568-B.2, A.8 per IEC 60068-2-38;
Temperature for step 1 shall be -45 +0/-5C. Temperature for step 3 shall be 85 +5/-0C
Exposure Time: 30 min. Number of Cycles: 100
No blistering, peeling or separation of the plating or other damage detrimental to operation of connector

4.5.11.1 or 4.5.11.2 4.5.13

IAW EIA-364-31,Method IV with
temperature exceptions;
IAW EIA-364-32, Test cond. A;
IAW IEC 60068-2-14, Test Method Z/AD

Salt Spray

5% solution, 34-36C. 48-1000 hours, depending on finish. Unmated connectors show no lifting of plated coating or exposure of basis
material under 3X magnification which adversely affects performance.

4.5.13
IAW EIA-364-26

Vibration
Shock
Thermal Shock

Water Immersion 1 Meter for 1 hour, Unmated

2013 Glenair, Inc.

TIA/EIA-568-B.2, A.7
IAW IEC 60068-2-14, Test Number Nb

MIL-STD-810 method 512

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-2

E-Mail: [email protected]

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal 5015 Reverse Bayonet Plug

with Cat 5e RJ45 Plug and
Rear Crimp Contact Termination

Connector Accessory

Front View
Rear View
06 = Straight Cylindrical Plug
with Accessory Threads
Shell Size
18

Basic
Number

ITS

06

18

Integrated High
Speed Connector
RJ45

SSRJ45

PG = Cable Gland Adaptor

PHM = Environmental Sealing
Backshell
N5 = Environmental Adapter
and Cable Clamp
N1 = Non Environmental Cable
Clamp
N0 = No Accessory Supplied
with Connector

N0

Termination Options

G3

Plating
G3 = Cadmium Olive Drab
F11 = Electroless Nickel
F6 = Black Electrodeposited
Paint (Std.)
F7 = Black Zinc Cobalt
Plating

3 = Male RJ45 Plug with Crimp

Contact Wire Termination

06 = Straight Cylindrical Plug

Connector with Accessory Threads

1.0000-20UNEF

1.35
(34.25)

1.43 (36.2)

2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-3

E-Mail: [email protected]

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal 5015 Reverse Bayonet Plug

with Cat 5e RJ45 Plug and
Pre-Terminated Pigtail

R 0.2
Max.

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

10

2:1
Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

1/1

PART NUMBER

SCALA SCALE

General tolerances

Tolleranze generali

ISO 2768 - fH

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

Ra (m)

FOGLIO SHEET CODICE CODE

REV.

1/1

2:1

PART NUMBER

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

R 0.2
Max.
0.2x45
Max.

Inner / outer edges without

specific indication WEIGHT

PESO

SCALA SCALE

APPROVED

ATTENTION:

FOGLIO SHEET CODICE CODE

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES

General tolerances

6
1

CHECKED
DRAWN

n / INDICE

10

2:1

ATTENTION:

ATTENZIONE:

REV.

Locazione:

SCALA SCALE

Ra (m)

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

Spigoli interni / esterni

privi di indicazione

0.2x45
Max.

R 0.2
Max.

>10
50

10

>50 >120
120 400

DRAWN

CHECKED

MATERIALE MATERIAL

General tolerances

ATTENTION:

APPROVED

Tolleranze generali

ATTENZIONE:

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

>6 >30
6
30 120
0.05 0.1 0.15

ISO 2768 - fH

Non sono ammessi spigoli

vivi e bave di lavorazione

1/1

FOGLIO SHEET CODICE CODE

Sharp edges or burrs not allowed

DATA DATE
n / INDICE

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

1
2

CHECKED

R 0.2
Max.

Ra (m)

APPROVED

10

SCALA SCALE

ATTENTION:

ATTENZIONE:

General tolerances

Tolleranze generali

PART NUMBER

2:1

SCALA SCALE

REV.

8
Ra (m)

PESO WEIGHT AREA

GRUPPO SERIES

1/1

GRUPPO SERIES

Ra (m)

SCALA SCALE

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

ISO 2768 - fH

PESO WEIGHT AREA

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

>10
50

REV.

>50 >120
>6 >30
6
120 400
30 120
0.05 0.1 0.15

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

3.34 (85.0)

REV.

x.xx
(Pigtail Length in Meters)

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-4

REV.

PART NUMBER

1/1

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

DESCRIZIONE DESCRIPTION

Inner / outer edges without

specific indication

DRAWN

0.2x45
Max.

CHECKED

R 0.2
Max.

APPROVED

DISEGNATO CONTROLLATO APPROVATO

Spigoli interni / esterni

privi di indicazione

2
1
n / INDICE

DATA DATE
n / INDICE

SCALA SCALE

DRAWN

0.2x45
Max.

2:1

PART NUMBER

DISEGNATO CONTROLLATO APPROVATO

Tolleranze generali

n / INDICE

DATA DATE
n / INDICE

1/1

FOGLIO SHEET CODICE CODE

DESCRIZIONE DESCRIPTION

General tolerances

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

0.2x45
Max.

Inner / outer edges without

specific indication

Tolleranze generali

ISO 2768 - fH

Sharp edges or burrs not allowed

ATTENZIONE:

4
MODIFIC.
ATTENTION:

Non sono ammessi spigoli

vivi e bave di lavorazione
Sharp edges or burrs not allowed

Spigoli interni / esterni

privi di indicazione

ATTENZIONE:

APPROVED

DATA DATE
n / INDICE

MODIFIC.

Tolleranze generali

REV.

2:1

General tolerances

ATTENTION:

ATTENZIONE:

DISEGNATO CONTROLLATO APPROVATO

CHECKED

MATERIALE MATERIAL

APPROVED

CHECKED

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

DRAWN

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

DRAWN

n / INDICE

DATA DATE
n / INDICE

MATERIALE MATERIAL

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

DISEGNATO CONTROLLATO APPROVATO

SCALA SCALE

MATERIALE MATERIAL

Spigoli interni / esterni

privi di indicazione

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

Locazione:

Ra (m)

PART NUMBER

ISO 2768 - fH

Non sono ammessi spigoli

vivi e bave di lavorazione

5
Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

DISEGNATO CONTROLLATO APPROVATO

General tolerances

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES
10

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

R 0.2
Max.

R 0.2
Max.

Tolleranze generali

ISO 2768 - fH

Locazione:

0.2x45
Max.

1/1

FOGLIO SHEET CODICE CODE

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

MATERIALE MATERIAL

Spigoli interni / esterni

privi di indicazione

File:RECEPTACLE_FEMM--PCB_030 - Copia

ATTENTION:

DESCRIZIONE DESCRIPTION

n / INDICE

Spigoli interni / esterni

privi di indicazione

Tolleranze generali

PESO WEIGHT AREA

Inner / outer edges without

specific indication

0.2x45
Max.

Ra (m)

ATTENZIONE:

Sharp edges or burrs not allowed

PESO

GRUPPO SERIES

File:RECEPTACLE_FEMM--PCB_030 - Copia

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Locazione:

File:RECEPTACLE_FEMM--PCB_030 - Copia

PESO WEIGHT AREA

ATTENZIONE:

File:RECEPTACLE_FEMM--PCB_030 - Copia

MODIFIC.
3

APPROVED

Inner / outer edges without

specific indication WEIGHT

Non sono ammessi spigoli

vivi e bave di lavorazione

Spigoli interni / esterni

privi di indicazione

CHECKED

DRAWN

DISEGNATO CONTROLLATO APPROVATO

Locazione:

n / INDICE

DATA DATE
n / INDICE

General tolerances

1/1

FOGLIO SHEET CODICE CODE

ISO 2768 - fH

1.43 (36.2)

DATA DATE
n / INDICE

APPROVED

MATERIALE MATERIAL

MATERIALE MATERIAL

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Plug

Plug

CHECKED

ATTENTION:

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

MODIFIC.

>10 >50 >120

>6 >30
6
50 120 400
30 120
0.05 0.1 0.15
1 030' 020' 010'

10

Plug

Plating

Plug

MATERIALE MATERIAL

DRAWN

DISEGNATO CONTROLLATO APPROVATO

R 0.2
Max.

n / INDICE

0.2x45
Max.

DESCRIZIONE DESCRIPTION

DATA DATE
n / INDICE

06 = Straight Cylindrical Plug

Connector
with Pre-Terminated

Pigtail

Locazione:

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Spigoli interni / esterni

privi di indicazione

Inner / outer edges without

specific indication

MODIFIC.

N = Normal

File:RECEPTACLE_FEMM--PCB_030 - Copia

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

4 = Male RJ45 Plug with Pre-Terminated Pigtail

-X.XX = pigtail length in meters

(-1.00 = 1 meter pigtail)

2013 Glenair, Inc.

G3

File:RECEPTACLE_FEMM--PCB_030 - Copia

Termination Options

PHM

File:RECEPTACLE_FEMM--PCB_030 - Copia

MODIFIC.

4-1.00 W

G3 = Cadmium Olive Drab

F11 = Electroless Nickel
F6 = Black Electrodeposited
Paint (Std.)

F7 = Black Zinc Cobalt

Plating

SSRJ45

MODIFIC.

18

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

06

Locazione:

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

ITS

Shell Size
18

Basic
Number

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

PERMISSION
File:RECEPTACLE_FEMM--PCB_030 - Copia

Locazione:

Integrated High
Speed Connector
RJ45

MODIFIC.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

06 = Straight Cylindrical Plug

with Accessory Threads

ISO 2768 - fH

Ra (m)

GRUPPO SERIES

REV.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Connector Accessory
PG = Cable Gland Adaptor
PHM = Environmental Sealing
Backshell

N5 = Environmental
Adapter
and Cable Clamp
N1 = Non Environmental Cable
Clamp

E-Mail: [email protected]

MIL-DTL-5015 Type
RJ45 Connectors
/

SuperSeal 5015 Reverse Bayonet Receptacle

with Cat 5e RJ45 Jack and Pre-Terminated Pigtail

2:1

PART NUMBER

1/1

PART NUMBER

FOGLIO SHEET CODICE CODE

10

Inner / outer edges without

specific indication

R 0.2
Max.

Spigoli interni / esterni

privi di indicazione

0.2x45
Max.

R 0.2
Max.

>10
50

10

DRAWN

CHECKED

Sharp edges or burrs not allowed

General tolerances

Tolleranze generali

ATTENZIONE:

MATERIALE MATERIAL

>6 >30
6
30 120
0.05 0.1 0.15

ISO 2768 - fH

ATTENTION:

APPROVED

>50 >120
120 400

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

1/1

FOGLIO SHEET CODICE CODE

Non sono ammessi spigoli

vivi e bave di lavorazione

ATTENTION:

ATTENZIONE:

1/1

GRUPPO SERIES

Ra (m)

SCALA SCALE

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

x.xx
(Pigtail Length in Meters)

General tolerances

Tolleranze generali

ISO 2768 - fH

PART NUMBER

REV.

2:1

SCALA SCALE

8
Ra (m)

PESO WEIGHT AREA

GRUPPO SERIES

PESO WEIGHT AREA

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

>10
50

>50 >120
>6 >30
6
120 400
30 120
0.05 0.1 0.15

REV.

B-5

DESCRIZIONE DESCRIPTION

0.2x45
Max.

REV.

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

SCALA SCALE

1/1

REV.

E-Mail: [email protected]

1/1

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

U.S. CAGE Code 06324

Spigoli interni / esterni

privi di indicazione

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

APPROVED

10

REV.

Front Panel Mount Square Flange

Receptacle with Accessory Threads
In Line Cylindrical Receptacle with
Accessory Threads
Rear Panel Mount Square Flange
Receptacle with Accessory Threads
Rear Panel Mount Jam Nut Receptacle
with Accessory Threads

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

2:1

8
7

General tolerances

Tolleranze generali

ATTENTION:

ATTENZIONE:

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

4
APPROVED
CHECKED
DRAWN

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

SCALA SCALE

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Shell Styles

FOGLIO SHEET CODICE CODE

DATA DATE
n / INDICE

MATERIALE MATERIAL

ISO 2768 - fH

Ra (m)

PESO

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

10

General tolerances

SCALA SCALE

REV.

1/1

FOGLIO SHEET CODICE CODE

2:1

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

R 0.2
Max.
0.2x45
Max.

Inner / outer edges without

specific indication WEIGHT

SCALA SCALE

PART NUMBER

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES

General tolerances

ATTENTION:

ATTENZIONE:

APPROVED
CHECKED

2
1

DRAWN

Tolleranze generali

General tolerances

MODIFIC.

Locazione:

Ra (m)

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

MODIFIC.

Sharp edges or burrs not allowed

Locazione:

Non sono ammessi spigoli

vivi e bave di lavorazione

SCALA SCALE

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

DISEGNATO CONTROLLATO APPROVATO

Locazione:

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

REV.

2:1

General tolerances

Tolleranze generali

ATTENZIONE:

PART NUMBER

ISO 2768 - fH

ATTENTION:

APPROVED

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Ra (m)

ISO 2768 - fH

CHECKED

R 0.2
Max.

Ra (m)

SCALA SCALE

CHECKED

ATTENTION:

Tolleranze generali

ISO 2768 - fH

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES
10

Ra (m)

ATTENTION:

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

DESCRIZIONE DESCRIPTION

DRAWN

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

MATERIALE MATERIAL

R 0.2
Max.

n / INDICE

0.2x45
Max.

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

5
ATTENZIONE:

Sharp edges or burrs not allowed

Inner / outer edges without

specific indication

DATA DATE
n / INDICE

R 0.2
Max.

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

0.2x45
Max.

1/1

FOGLIO SHEET CODICE CODE

Locazione:

APPROVED

Non sono ammessi spigoli

vivi e bave di lavorazione

Spigoli interni / esterni

privi di indicazione

R 0.2
Max.

GRUPPO SERIES

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

DESCRIZIONE DESCRIPTION

Spigoli interni / esterni

privi di indicazione

2
CHECKED

File:RECEPTACLE_FEMM--PCB_030 - Copia

MODIFIC.

File:RECEPTACLE_FEMM--PCB_030 - Copia

MATERIALE MATERIAL

PESO

DISEGNATO CONTROLLATO APPROVATO

DRAWN

0.2x45
Max.

PESO WEIGHT AREA

Sharp edges or burrs not allowed

n / INDICE

ATTENZIONE:

Inner / outer edges without

specific indication WEIGHT

Spigoli interni / esterni

privi di indicazione

Tolleranze generali

PESO WEIGHT AREA

APPROVED

CHECKED

Non sono ammessi spigoli

vivi e bave di lavorazione

DRAWN

0.2x45
Max.

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

MATERIALE MATERIAL

Spigoli interni / esterni

privi di indicazione

General tolerances

Tolleranze generali

2:1

PART NUMBER

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

DRAWN

MATERIALE MATERIAL

MODIFIC.

DISEGNATO CONTROLLATO APPROVATO

Spigoli interni / esterni

privi di indicazione

DATA DATE
n / INDICE

ATTENTION:

ATTENZIONE:

n / INDICE

File:RECEPTACLE_FEMM--PCB_030 - Copia

Inner / outer edges without

specific indication

ISO 2768 - fH

File:RECEPTACLE_FEMM--PCB_030 - Copia

DATA DATE
n / INDICE

MATERIALE MATERIAL

APPROVED

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

1/1

FOGLIO SHEET CODICE CODE

070

Locazione:

CHECKED

R 0.2
Max.

030

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

MATERIALE MATERIAL

DRAWN

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

0.2x45
Max.

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

01

Jack

01 = Inline Recptacle Connector with

Pre-Terminated Pigtail Shown

00

2013 Glenair, Inc.

Jack

DESCRIZIONE DESCRIPTION

Spigoli interni / esterni

privi di indicazione

Inner / outer edges without

specific indication

1.21 (30.7)

Jack

Jack

MODIFIC.

N = Normal

2 = Receptacle Connector with RJ45 Jack and

Pre-Terminated Pigtail

-X.XX = pigtail length in meters

(-1.00 = 1 meter pigtail)

G3

PHM

G3 = Cadmium Olive Drab

F11 = Electroless Nickel

F6 = Black
Electrodeposited
Paint (Std.)
F7 = Black Zinc Cobalt
Plating

Locazione:

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Termination Options

1.21
(30.7)

2-1.00 W

File:RECEPTACLE_FEMM--PCB_030 - Copia

File:RECEPTACLE_FEMM--PCB_030 - Copia

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Locazione:

MODIFIC.

SSRJ45

Plating

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

MODIFIC.

18

Locazione:

00

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

ITS

Shell Size
18

File:RECEPTACLE_FEMM--PCB_030 - Copia

Basic
Number

Integrated High
Speed Connector
RJ45

MODIFIC.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

(See Table)

File:RECEPTACLE_FEMM--PCB_030 - Copia

Shell Styles

ISO 2768 - fH

Ra (m)

GRUPPO SERIES

REV.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Connector Accessory
PG = Cable Gland Adaptor
PHM = Environmental Sealing
Backshell
N5 = Environmental Adapter
and Cable Clamp
N1 = Non Environmental Cable
Clamp

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal 5015 Reverse Bayonet Receptacle

with Cat 5e RJ45 Jack and PCB Termination

PART NUMBER
>6 >30
30 120

2:1

>50 >120
120 400
>10
50
10
R 0.2
Max.

APPROVED

0.2x45
Max.

CHECKED

Inner / outer edges without

Spigoli interni / esterni

privi di indicazione

8
7

General tolerances

Tolleranze generali

ATTENTION:

ATTENZIONE:

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

6
1
n / INDICE

DRAWN

DATA DATE
n / INDICE

MATERIALE MATERIAL

5
PART NUMBER

REV.

SCALA SCALE

2:1

PART NUMBER

DRAWN

0.2x45
Max.

R 0.2
Max.

>50 >120
>6 >30
6
120 400
30 120
0.05 0.1 0.15

>10
50

10

Sharp edges or burrs not allowed

CHECKED

MATERIALE MATERIAL

2:1

General tolerances

Tolleranze generali

ATTENZIONE:

PART NUMBER

ISO 2768 - fH

ATTENTION:

APPROVED

1/1

FOGLIO SHEET CODICE CODE

Non sono ammessi spigoli

vivi e bave di lavorazione

n / INDICE

DATA DATE
n / INDICE

ATTENTION:

ATTENZIONE:

General tolerances

Tolleranze generali

PESO WEIGHT AREA

REV.

SCALA SCALE

8
Ra (m)

PESO WEIGHT AREA

GRUPPO SERIES

1/1

GRUPPO SERIES

Ra (m)

SCALA SCALE

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

ISO 2768 - fH

2x .060

REV.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Printed in U.S.A.

E-Mail: [email protected]

1/1

DISEGNATO CONTROLLATO APPROVATO

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

.117

DISEGNATO CONTROLLATO APPROVATO

2:1

8x .030

ISO 2768 - fH

Ra (m)

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

PESO

SCALA SCALE

REV.

1/1

2:1

PART NUMBER

10

R 0.2
Max.
0.2x45
Max.

Inner / outer edges without

specific indication WEIGHT

SCALA SCALE

FOGLIO SHEET CODICE CODE

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES

General tolerances

ATTENTION:

ATTENZIONE:

APPROVED
CHECKED

2
1
n / INDICE

DRAWN

ISO 2768 - fH

FOGLIO SHEET CODICE CODE

>10
50

>50 >120
>6 >30
6
120 400
30 120
0.05 0.1 0.15

B-6

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

General tolerances

FOGLIO SHEET CODICE CODE

.514

U.S. CAGE Code 06324

Tolleranze generali

SCALA SCALE

1/1

MODIFIC.

Ra (m)

APPROVED

10

REV.

4x .030

Sharp edges or burrs not allowed

5
ISO 2768 - fH

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES
10

Locazione:

SCALA SCALE

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Ra (m)

ATTENTION:

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

2 x .155 .014
(3.94 0.36)

Non sono ammessi spigoli

vivi e bave di lavorazione

Spigoli interni / esterni

privi di indicazione

Locazione:

General tolerances

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

DISEGNATO CONTROLLATO APPROVATO

MODIFIC.

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

Tolleranze generali

ATTENZIONE:

REV.

2:1

General tolerances

ATTENTION:

APPROVED

CHECKED

MATERIALE MATERIAL

R 0.2
Max.

Ra (m)

Tolleranze generali

10

DESCRIZIONE DESCRIPTION

CHECKED

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

PART NUMBER

ISO 2768 - fH
g

R 0.2
Max.

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione
DRAWN

0.2x45
Max.

Inner / outer edges without

specific indication

DATA DATE
n / INDICE

R 0.2
Max.

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

0.2x45
Max.

MATERIALE MATERIAL

Spigoli interni / esterni

privi di indicazione

1/1

FOGLIO SHEET CODICE CODE

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
Locazione:

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

DESCRIZIONE DESCRIPTION

Sharp edges or burrs not allowed

Spigoli interni / esterni

privi di indicazione

0.2x45
Max.

GRUPPO SERIES

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

.020

Non sono ammessi spigoli

vivi e bave di lavorazione

.020 (0.51)
.015 (0.38)

ATTENZIONE:
ATTENTION:

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Inner / outer edges without

specific indication

APPROVED

Spigoli interni / esterni

privi di indicazione

Tolleranze generali

PESO WEIGHT AREA

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

PESO WEIGHT AREA

Sharp edges or burrs not allowed

2
CHECKED

ATTENZIONE:

APPROVED

CHECKED

Non sono ammessi spigoli

vivi e bave di lavorazione

PESO

DRAWN

Inner / outer edges without

specific indication WEIGHT

4x .080

R 0.2
Max.

Ra (m)

8x

DISEGNATO CONTROLLATO APPROVATO

DISEGNATO CONTROLLATO APPROVATO

DRAWN

.080 Typ

n / INDICE

Spigoli interni / esterni

privi di indicazione

DATA DATE
n / INDICE

File:RECEPTACLE_FEMM--PCB_030 - Copia

Locazione:

n / INDICE

DRAWN

0.2x45
Max.

SCALA SCALE

DISEGNATO CONTROLLATO APPROVATO

Tolleranze generali

MATERIALE MATERIAL

MODIFIC.

n / INDICE

DATA DATE
n / INDICE

Spigoli interni / esterni

privi di indicazione

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

File:RECEPTACLE_FEMM--PCB_030 - Copia

ATTENZIONE:

2:1

PART NUMBER

File:RECEPTACLE_FEMM--PCB_030 - Copia

DATA DATE
n / INDICE

MATERIALE MATERIAL

MODIFIC.

B_030 - Copia

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Locazione:

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

MATERIALE MATERIAL

General tolerances

ISO 2768 - fH

2013 Glenair, Inc.

Recommended PCB Layout for 03 (-5)

Configurations Only

1.01
(25.6)

1.35
(34.2)

.16 (4.0)
8 x .135 .014
(3.43 0.36)

APPROVED

ATTENTION:

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

1/1

FOGLIO SHEET CODICE CODE

Jack

CHECKED

>10 >50 >120

>6 >30
6
50 120 400
30 120
0.05 0.1 0.15
1 030' 020' 010'

10

0.12 (3.30)
(3.2)
4x4 x 0.13

MATERIALE MATERIAL

DRAWN

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

R 0.2
Max.

DATA DATE
n / INDICE

0.2x45
Max.

DESCRIZIONE DESCRIPTION

Spigoli interni / esterni

privi di indicazione

Inner / outer edges without

specific indication

1.21
(30.7)

Jack

Jack

Jack

5 = Rear-Mount Square
Flange Receptacle

with PCB Termination

MODIFIC.

N = Normal

Termination Options

Locazione:

G3

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

File:RECEPTACLE_FEMM--PCB_030 - Copia

.91 (23.2)

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

File:RECEPTACLE_FEMM--PCB_030 - Copia

SSRJ45

MODIFIC.

Locazione:

Front View

1.06
1.06(26.92)
(27.0)

MODIFIC.

18

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

1.380
1.37 (35.05)
(35.0)

Locazione:

03

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

ITS

Integrated High
Speed Connector
RJ45

File:RECEPTACLE_FEMM--PCB_030 - Copia

Shell Size
18

Basic
Number

Plating

G3 = Cadmium Olive Drab

F11 = Electroless Nickel
F6 = Black Electrodeposited
Paint (Std.)
F7 = Black Zinc Cobalt
Plating

File:RECEPTACLE_FEMM--PCB_030 - Copia

03 = Rear Panel Mount Square

Flange Receptacle without
Accessory Threads

MODIFIC.

Rear View

ISO 2768 - fH

Ra (m)

GRUPPO SERIES

REV.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Front View

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal 5015 Reverse Bayonet Receptacles

with Cat 5e RJ45 Jack/Jack Couplers

Shell Styles

REV.

Tolleranze generali

1/1

Sharp edges or burrs not allowed

10

R 0.2
Max.

SCALA SCALE

PART NUMBER

18
1/1
31.7
27
4.5

REV.

FOGLIO SHEET CODICE CODE

SCALA SCALE

General tolerances

General tolerances

ISO 2768 - fH

PART NUMBER

1/1

DESCRIZIONE DESCRIPTION

0.2x45
Max.

Inner / outer edges without

specific indication

Spigoli interni / esterni

privi di indicazione

Tolleranze generali

ISO 2768 - fH

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES

Ra (m)

REV.

R 0.2
Max.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

ATTENTION:

ATTENZIONE:

APPROVED

3
1

CHECKED
DRAWN

n / INDICE

DISEGNATO CONTROLLATO APPROVATO

DATA DATE
n / INDICE

MATERIALE MATERIAL

ATTENTION:

FOGLIO SHEET CODICE CODE

ATTENZIONE:

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

10

FOGLIO SHEET CODICE CODE

PART NUMBER

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

2:1

8
7

General tolerances

Tolleranze generali

ISO 2768 - fH

Ra (m)

PESO

Inner / outer edges without

specific indication WEIGHT

Non sono ammessi spigoli

vivi e bave di lavorazione

0.2x45
Max.

SCALA SCALE

REV.

1/1

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

R 0.2
Max.

10

APPROVED

AREA
GRUPPO
DESCRIZIONE
DESCRIPTION

SCALA SCALE

General tolerances

7
2
1

DRAWN

MODIFIC.

>10 >50 >120

>6 >30
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

SERIES

Tolleranze generali

ATTENTION:

ATTENZIONE:

4
0.2x45
Max.

Ra (m)

Locazione:

GRUPPO SERIES

0.2x45
Max.

R 0.2
Max.

Sharp edges or burrs not allowed

ISO 2768 - fH

Non sono ammessi spigoli

vivi e bave di lavorazione

DRAWN

CHECKED

ATTENTION:

APPROVED

MATERIALE MATERIAL

General tolerances

Tolleranze generali

ATTENZIONE:

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

1/1

FOGLIO SHEET CODICE CODE

>50 >120
>6 >30
6
120 400
30 120
0.05 0.1 0.15

>10
50

10

Locazione:

Sharp edges or burrs not allowed

5
Spigoli interni / esterni
privi di indicazione

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

MODIFIC.

CHECKED

Ra (m)

SCALA SCALE

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.
Locazione:

REV.

2:1

General tolerances

Tolleranze generali

ATTENZIONE:

PART NUMBER

ISO 2768 - fH

ATTENTION:

APPROVED

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

CHECKED

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

n / INDICE

DRAWN

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

Locazione:

File:RECEPTACLE_FEMM--PCB_030 - Copia

PART NUMBER

2:1

REV.

SCALA SCALE

8
Ra (m)

PESO WEIGHT AREA

GRUPPO SERIES

ATTENTION:

DESCRIZIONE DESCRIPTION

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

R 0.2
Max.

R 0.2
Max.

Inner / outer edges without

specific indication

0.2x45
Max.

1/1

FOGLIO SHEET CODICE CODE

ATTENZIONE:

Sharp edges or burrs not allowed

0.2x45
Max.

PESO WEIGHT AREA

Sharp edges or burrs not allowed

CHECKED

File:RECEPTACLE_FEMM--PCB_030 - Copia

APPROVED

DATA DATE
n / INDICE

>10 >50 >120

>6 >30
10
6
50 120 400
30 120

0.05 0.1 0.15

1 030' 020' 010'

MATERIALE MATERIAL

Non sono ammessi spigoli

vivi e bave di lavorazione

Spigoli interni / esterni

privi di indicazione

APPROVED

Shell Size
6 C
7 (mm)
8

2:1
R 0.1 (mm)
T (mm)

R 0.2
Max.

Ra (m)

APPROVED

10

SCALA SCALE

>10
50

4
5

ATTENTION:

ATTENZIONE:

General tolerances

Tolleranze generali

PESO WEIGHT AREA

1/1

GRUPPO SERIES

Ra (m)

SCALA SCALE

2:1

PART NUMBER

FOGLIO SHEET CODICE CODE

ISO 2768 - fH

18
35.1
33.75

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Shell Size
A + 0.25 (mm)
B - 0.35 (mm)

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

>50 >120
>6 >30
6
120 400
30 120
0.05 0.1 0.15

Jam Nut Receptacle Connectors

REV.

MATERIALE MATERIAL

DESCRIZIONE DESCRIPTION

2
CHECKED

DRAWN

MATERIALE MATERIAL

DRAWN

0.2x45
Max.

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

Tolleranze generali

Spigoli interni / esterni

privi di indicazione

2:1

PART NUMBER

Inner / outer edges without

1 030' 020' 010'
specific
indication WEIGHT AREA
PESO
GRUPPO SERIES
DESCRIZIONE
DESCRIPTION

DISEGNATO CONTROLLATO APPROVATO

Non sono ammessi spigoli

vivi e bave di lavorazione

PESO

CHECKED

Inner / outer edges without

specific indication WEIGHT

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

DRAWN

n / INDICE

DISEGNATO CONTROLLATO APPROVATO

MATERIALE MATERIAL

n / INDICE

Spigoli interni / esterni

privi di indicazione

DATA DATE
n / INDICE

DISEGNATO CONTROLLATO APPROVATO

Spigoli interni / esterni

privi di indicazione

ATTENZIONE:

18
26.5
27
3.4

File:RECEPTACLE_FEMM--PCB_030 - Copia

Inner / outer edges without

specific indication

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

General tolerances

ISO 2768 - fH

Panel Cutout for 03 and 030

Rear Panel Mounting Connectors
2:1
DATA DATE
n / INDICE

APPROVED

ATTENTION:

Sharp edges or burrs not allowed

Non sono ammessi spigoli

vivi e bave di lavorazione

1/1

FOGLIO SHEET CODICE CODE

Shell
Size
MODIFIC.

C (mm)
R 0.1 (mm)
T (mm)

MODIFIC.

Locazione:

MATERIALE MATERIAL

Panel Cutout for 00 and 02

Front Panel Mounting Connectors

CHECKED

>10 >50 >120

>6 >30
6
50 120 400
30 120
0.05 0.1 0.15
1 030' 020' 010'

10

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

U.S. CAGE Code 06324

REV.

2013 Glenair, Inc.

Jack

Panel Cut-Out Dimensions

R 0.2
Max.

MATERIALE MATERIAL

DRAWN

DISEGNATO CONTROLLATO APPROVATO

n / INDICE

DATA DATE
n / INDICE

0.2x45
Max.

Spigoli interni / esterni

privi di indicazione

DESCRIZIONE DESCRIPTION

Inner / outer edges without

specific indication

Jack

"

Jack

Jack

N = Normal

MODIFIC.

G3

Plating

G3 = Cadmium Olive Drab

F11 = Electroless Nickel
= Black Electrodeposited

F6
Paint (Std.)

F7 = Black Zinc Cobalt

Plating

Locazione:

PHM

Termination Options
1 = Inline, Front and Rear
Square Flange and Jam Nut

Receptacles with RJ45 Jack/

Jack Couplers

"

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

File:RECEPTACLE_FEMM--PCB_030 - Copia

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

File:RECEPTACLE_FEMM--PCB_030 - Copia

SSRJ45

MODIFIC.

Locazione:

MODIFIC.

THIS COPYRIGHTED DOCUMENT IS THE PROPERTY OF GLENAIR, INC. AND IS FURNISHED ON THE CONDITION THAT IT IS NOT TO BE DISCLOSED, REPRODUCED IN WHOLE
OR IN PART, OR USED TO SOLICIT QUOTATIONS FROM COMPETITIVE SOURCES, OR USED FOR MANUFACTURE BY ANYONE OTHER THAN GLENAIR, INC. WITHOUT WRITTEN
PERMISSION FROM GLENAIR, INC. THE INFORMATION HEREIN HAS BEEN DEVELOPED AT GLENAIR'S EXPENSE AND MAY BE USED FOR ENGINEERING EVALUATION AND
INCORPORATION INTO TECHNICAL SPECIFICATIONS AND OTHER DOCUMENTS WHICH SPECIFY PROCUREMENT OF PRODUCTS FROM GLENAIR, INC.

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

18

Locazione:

00

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

ITS

Shell Size
18

Basic
Number

Integrated High
Speed Connector
RJ45

File:RECEPTACLE_FEMM--PCB_030 - Copia

(See Table)

File:RECEPTACLE_FEMM--PCB_030 - Copia

Shell Styles

Non sono ammessi spigoli

vivi e bave di lavorazione

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

Connector Accessory
PG = Cable Gland Adaptor
PHM = Environmental Sealing
Backshell
N5 = Environmental Adapter and
Cable Clamp
N1 = Non Environmental Cable Clamp
N0 = No Backshell

ISO 2768 - fH

PESO WEIGHT AREA

Ra (m)

GRUPPO SERIES

070

Rear View

Front View

Spigoli interni / esterni

privi di indicazione

Disegno eseguito con CAD. Non sono ammesse modifiche manuali. - RIPRODUZIONE VIETATA - La ditta tutela i propri diritti sui disegni a termine di legge.

030

File:RECEPTACLE_FEMM--PCB_030 - Copia

01

MODIFIC.

00

Front Panel Mount Square Flange

Receptacle with Accessory Threads
In Line Cylindrical Receptacle with
Accessory Threads
Rear Panel Mount Square Flange
Receptacle with Accessory Threads
Rear Panel Mount Jam Nut Receptacle
with Accessory Threads

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-7

E-Mail: [email protected]

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal 5015 Reverse Bayonet Receptacles

with Cat 5e RJ45 Jack/Jack Couplers
1.380
(35.05)
1.37 (35.0)

1.380 (35.05)

1.06
1.06(26.92)
(27.0)

1.06 (26.92)
.16 (4.0)

.75
(19.1)

1.21
(30.7)

Front View

1.0000-20UNEF

1.06
1.42
(36.1)
(40.8)

0.13 (3.30)

00 = Front Panel Mount Square Flange

Receptacle with Accessory Threads

.16 (4.0)

1.21
(30.7)

1.0000-20UNEF

1.06
1.35
4x
(34.3)
(40.8)

x 0.12
(3.2)
4x 4 0.13
(3.30)

.91
(23.2)

.75
(19.1)

030 = Rear Panel Mount Square Flange

Receptacle with Accessory Threads
.16 (4.0)

1.21
(30.7)

1.0000-20UNEF

1.42
1.06
(36.1)
(40.8)

1.33
1.20 (30.5)
(33.8)

01 = In Line Cylindrical Receptacle with

Accessory Threads

Front View
.66 (16.8)

.35 (9.0)

.66 (16.8)

O-Ring

1.21
(30.7)

1.0000-20UNEF

1.3750-18 UNEF
1.33
(33.7)

1.57 (40.0)

1.94
(49.3)

1.87 (47.6)

Front View
2013 Glenair, Inc.

.19 (4.8)

070 = Rear Panel Mount Jam Nut Receptacle

with Accessory Threads
U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-8

E-Mail: [email protected]

MIL-DTL-5015 Type
RJ45 Connectors

SuperSeal Reverse Bayonet RJ45 Connectors

MIL-DTL-5015 Type Size 18 Cat5e

Available Pigtail Configurations and Backshell Options

Cable Clamp

N1

N1

Backshell

N5

N5

Backshell

PHM

PHM

Backshell

PG

PG
2013 Glenair, Inc.

The Glenair N1 cable clamp provides a

simple and effective strain relief option for
all high speed data transmission connectors.
Low profile saddle clamps purchase the
cable just aft of the accessory threads for
an unobtrusive and compact strain-relief
solution. May be used in conjunction with a
wide range of standard backshell accesories.

The Glenair N5 backshell

offers users the benefits of
an environmental sealing
backshell combined with a
style C cable clamp.

The Glenair PHM

backshell utilizes a
non-environmental
compression bushing
that provides ample
strain relief for general
duty applications.

The Glenair PG cable gland

backshell provides basic
environmental protection
and strain relief for use with
straight plugs.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

B-9

E-Mail: [email protected]

MIL-DTL-38999 TYPE
FIELD-READY
USB 2.0/3.0

M I L - DT L - 3 8 9 9 9 T Y P E

SUPERSEAL

Rugged environmental MIL-DTL-38999 type

connectors with IP68 sealing, robust insert-toshell grounding, and a complete range of wire,
cable, and circuit board terminations

Features

Superior sealingIP68 when matedfor complete system protection against

water, sand and dust

Highly durable USB design, including enhanced operating temperature, increased

life-cycle, and rugged vibration and shock performance

Shielded/grounded coupler designs in both receptacle and plug connectors

Crimp, solder-cup, PC tail, and Quadrax contact/wire termination options
USB 2.0 and 3.0 plug and receptacle versions
Industry standard scoop proof, self-locking, triple-start
threaded coupling design of MIL-DTL-38999 Series III type
connectors

Intermateable with other MIL-DTL-38999 type

RJ45 field-duty connectors

Glenair, Inc.
1211 Air Way
Glendale, CA
91201-2497
818-247-6000
[email protected]
www.glenair.com

D38999 Type
USB Connectors

SuperSeal USB 2.0 and USB 3.0 Connectors

D38999, Series III Type

Product Selection Guide

233-340
SuperSeal MIL-DTL-38999 Series III Type Connectors
USB 2.0/3.0 Type A or B Plug-to-Receptacle or
Receptacle-to-Receptacle Coupler

233-341
SuperSeal MIL-DTL-38999 Series III Type Connectors
USB 2.0/3.0 Type A or B Receptacle
to Size 22D Crimp Removable Contacts

233-342
SuperSeal MIL-DTL-38999 Series III Type Receptacles
USB 2.0/3.0 Type A or B Receptacle
to PC Tail Termination

233-343
SuperSeal MIL-DTL-38999 Series III Type Receptacles
USB 2.0/3.0 Type A or B Receptacle
to Solder Cup Terrmination

233-344
SuperSeal MIL-DTL-38999 Series III Type Connectors
Size 22 Pin or Socket Contacts to
USB 2.0/3.0 Type A or B Receptacle

233-360
SuperSeal MIL-DTL-38999 Series III Type Receptacles
USB 2.0/3.0 Plug-to-Receptacle or
Receptacle-to-Receptacle Coupler Size 17
2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-1

E-Mail: [email protected]

D38999 Type
USB Connectors

SuperSeal USB 2.0 and USB 3.0 Connectors

D38999, Series III Type

Materials, Performance Specifications and PCB Layout

Material and Finishes:

Shell/coupling High strength aluminum alloy

Plating Cadmium olive drab over electroless nickel; Nickel PTFE; Electroless nickel
Contacts PC tails, solder cup, and crimp contacts: Copper alloy, gold plated
Contacts USB 2.0 Type A or USB 3.0 Type A
Seals Silicon-based elastomer
USB Insulator LCP
Composite, stainless steel and other materials and finishes available. Please consult factory.

Shell Type and Sizes:

Shell Type D38999 Series III Type

Sizes Shell sizes 15 and 17

Electrical Specifications:

Data Rate 480 Mbps USB 2.0 Type A, 4.8 Gbps USB 3.0 Type A
Signal Method Pulling 2.0 USB Type A, Synchronous USB 3.0 Type A
Power Usage 500 mAmps USB 2.0 Type A, 900 mAmps USB 3.0 Type A
Current Rating 1.5 Amps, USB 2.0 Type A and USB 3.0 Type A
D.W.V. 500 VAC USB 2.0 Type A, 1000 VAC USB 3.0 Type A
Frequency 1000 MegOhms USB 2.0 Type A and USB 3.0 Type A
Wiring Straight through
Cabling Length 5.0 Meters USB 2.0 Type A, 3.0 Meters USB 3.0 Type A
Shield Continuity Continuous through coupler and grounded to shell, full shielding.

Environmental / Mechanical Performance:

Sealing IP68 mated condition

Outgassing UL94 V0 low smoke, zero halogen
Operating Temperature Range -40C to +125C
Vibration 20gs, 3 Axis, 10 - 500 Hz
Mechanical Shock 300 gs
Backshell Interface MIL-DTL-38999 connector designator H
Mating Cycles 500

Options:

Round mounting holes, self-locking clinch nuts, plug-and-play cordsets, self-closing spring-loaded
cover or anti-decoupling covers (receptacle only), integral shrink boot adapter and low-temp
shrink boot (plug only).

RECOMMENDED PCB LAYOUT

USB 3.0 / Type A
USB 2.0 / Type A
(Horizontal Orientation)
(Horizontal Orientation)
Connector Axis
Connector Axis
2x .220

.060

5
2x .440

Connector Axis

Connector Axis

4
4x .035

2x .440

9x .035
2x .150

2x .150

2x .410

Recommended
(Solder Side)

Recommended
(Solder Side)
2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-2

E-Mail: [email protected]

D38999 Type
USB Connectors

SuperSeal USB 2.0 and USB 3.0 Connectors

D38999, Series III Type
USB Wiring, Customer Wiring Layout Guide and
Recommended Mounting Holes
Customer Wiring Layout Guide
To Be Completed By the Customer

P1 ( Connector Interface )
Pin Locations To Be Determined
By The Customer, Only 4 Pins Needed)
Red

USB 2.0 Wiring

White 28 AWG
Green 28 AWG
Black 22 AWG

D-

Data-

D+

Data+

4 GND

Recommended
Wire Sizes (AWG)

Pin

Name

(V BUS)

Red

+5 V

22

(D-)

White

Data -

28

(D+)

Green

Data +

28

(GND)

Black

Ground

22

P2 ( USB 2.0 Female)

Pin Name Description
+5 V
1 V-BUS

22 AWG

Cable Color
Description
(USB)

Ground

USB 3.0 Wiring

P1 ( Connector Interface )
Pin Locations To Be Determined by the Customer P2 (USB 3.0 Female)
Only 9 Pins Needed)
Pin Name Description
Red 22 Awg
1 V-bus +5 V
White 28 Awg
Data2 DGreen 28 Awg
Data+
3 D+
Black 22 Awg
4 Gnd Ground
5

Rx-

Receiver

Rx+

Receiver

Gnd

Ground

8t

x-

transmitter

9t

x+

transmitter

Pin

Name

Description

Recommended
Wire Sizes (AWG)

(V BUS)

+5 V

22

(D-)

(D+)

(GND)

Ground

22

(RX-)

Receiver

28

(RX+)

Receiver

28

(GND)

Ground

22

(TX-)

Transmitter

28

(TX+)

Transmitter

28

USB 2.0
Data

28
28

All External Dimensions, Features, etc.

Compliant with D38999/20, /24 & /26
Consult Factory for Additional Information

2x .969
(24.61)

4x .133 (3.38)
.123 (3.12)
.005

2x .969
(24.61)

4x .133 (3.38)
.123 (3.12)
.005

1.085 (27.56)
1.083 (27.51) Flat
1.145 (29.08)
1.135 (28.83)

Recommended Panel Cut Out

Back Panel Mounting

1.047 (26.59) Min

.906 (23.01) Min

Front Panel Mounting

Recommended Mounting Holes For

Wall Mount Receptacles
2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-3

E-Mail: [email protected]

D38999 Type
USB Connectors

M39029/58-360 and M39029/56-348

850-002-22-360 and 850-001-22-348

Standard Duty Electrical Pin and Socket Contacts

SIZE #22 PIN AND SOCKET CONTACTS FOR USE WITH SUPERSEAL 233-344 CONNECTORS
Mating End
Wire
Size
Accomodation
Pin
Socket

22
22

Pin Contact

.062
.060

.048
.046

.531
Ref

Black
Blue
Orange

H x 45

Glenair Part Number

M39029/58-360
M39029/56-348

850-002-22-360
850-001-22-348

22-28 AWG
22-28 AWG

.237
.231

Color Bands

Military Part Number

.300
.295
.0305
.0295

.033
.029

Flat
.011 Max

.0355
.0335
Manufacturer
Symbol

.022
.018
Thru One Side Only
.141

.129
.122

.237
.231

Rad
.020
.010
.010 Typ
.004
.041
.036

60
Typ

Socket Contact
.855 (Ref)

.237
.231

.626/.616
.585 Min.

.033
.029

.166 Min
Mfgr. Symbol

.010 Typ
.004

.005 x 45
.003
.0355 .048 .062
.0335 .046 .060

50/44

-22-360 Only

Color Bands

Gray
Yellow
Orange

.062 .047 .031

.040
.030

.022
.018
Thru One Side Only
.141

.041
.036
.040
.030

60
Typ

.129
.122

-22-348 Only

Termination Tools
Size
22

Part Number
.

Military Number

AWG
Handling

Crimp Tool

Positioner

Insertion Tool

Extraction Tool

Pin

850-002-22-360

M39029/58-360

22, 24, 26,

28

M22520/2-01
M22520/7-01

M22520/2-09
M22520//7-07

M81969/14-01
M81969/8-01

M81969/14-01
M81969/8-02

Socket

850-001-22-348

M39029/56-348

22, 24, 26,

28

M22520/2-01
M22520/7-01

M22520/2-07
M22520//7-05

M81969/14-01
M81969/8-01

M81969/14-01
M81969/8-02

2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-4

E-Mail: [email protected]

D38999 Type
USB Connectors

SuperSeal MIL-DTL-38999 Series III Type Connectors

Contacts and Tools
Size #22 Crimp Contact Instructions

HOW TO TERMINATE, INSTALL AND REMOVE SIZE #22 CONTACTS

Set Up Crimp Tool. Install proper positioner into

crimp tool. The label on the positioner shows
the proper tool setting for each wire size. Turn the
adjustment wheel to the correct setting.

Strip Wire. Remove wire insulation, taking care

to avoid nicking or cutting wire strands. Strip
wire to length shown.

Adjustment Wheel
.145/.155
(3.68/3.94)

1
Crimp Tool

Insert wire into contact. The wire should be

visible in the inspection hole.

Insert contact into crimp tool as shown. Make

sure that the contact is fully inserted into
the tool. Squeeze handle completely. The ratchet
mechanism will not allow a partial crimp. Release
handle and remove contact.

Positioner
INSPECTION
HOLE

Inspect crimped contact. Wire should be fully

inserted and the crimp should be uniform in
appearance.

Insertion/Extraction Tool M81969/14-01

EXTRACTION TIP
WHITE END

INSERTION TIP
BLUE END

Install contact into connector. Push the contact

through the rear grommet until the contact
locks into place. This can usually be done by hand
without the need for a tool. If the wire gage is #26
or smaller, a tool is helpful. There are two techniques
for installing contacts with a tool. One method is to
push the contact in by hand, then use the tool to
finish the insertion. The other method is to position
the insertion tip against the contact shoulder,
then insert the contact. Use insertion/extraction
tool 809-088 to install contacts. Slide the wire into
the groove on the blue end of the tool. Slide the
tool tip up the contact until it touches the contact
shoulder. USE CARE TO AVOID DAMAGING THE
CONNECTOR.

CONTACT
RETAINER CLIP

RUBBER
GROMMET

Contact Extraction. Use tool M81969/14-01. The

white end is used for contact extraction. First,
push the wire into the groove of the metal tip. Slide
the tip of the tool into the connector. Push the tool
into the connector cavity until the tip bottoms in the
connector. Avoid wiggling or rocking the tip. This may
damage the cavity. A straight push is best. Pinch the
wire between your finger and the white plastic grip
and slide the tool and contact out of the connector.
Wire insulation diameter greater than 0.045 inches
(1.14mm) is too large to work properly with the
extraction tool. connector damage is possible.

2013 Glenair, Inc.

RETAINER
TINE

RUBBER
GROMMET

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-5

E-Mail: [email protected]

D38999 Type
USB Connectors

233-340
SuperSeal MIL-DTL-38999 Series III Type Connectors
USB 2.0/3.0 Plug-to-Receptacle or
Receptacle-to-Receptacle Coupler Size 15

Connector
Style

Basic
Number

233-340

(See Below)

USB
Performance
2 = 2.0
3 = 3.0

NF 00 - 15

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

Shell Size
15

USB Front
Interface Type
A = Type A
B = Type B

USB Back
Interface Type
A = Type A
B = Type B

USB
Orientation
H = Horizontal
V = Vertical

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

Connector Styles
00 = Receptacle, Wall Mount
with Slotted Holes
07 = Receptacle, Jam Nut Mount
G6 = Plug

Plug
Front View

Square Flange Receptacle

Front View

Shrink Boot
Part No. 770-028
(Omit for None)

All external dimensions,

Features, etc. Compliant with
D38999/20, /24 & /26.
Consult factory for additional
information
Size 17 shells also available.
Consult factory, refer to P/N 233-360.

1.550 (39.37) Max

.823 (20.90)
.768 (19.51)

Jam Nut Receptacle

Front View

.098 (2.49)
.083 (2.11)

41

C
USb Orientation Options
(Partial Views Shown)

Receptacle

Square Flange Receptacle

Plug

1.935 (49.16) Max

horizontal

2013 Glenair, Inc.

1.280
(32.51)
Max

Vertical

horizontal

1.550 (39.37) Max

.890 (22.61)
Max
.579 (14.71)
.555 (14.10)

Vertical

Plug

U.S. CAGE Code 06324

Jam Nut

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-6

E-Mail: [email protected]

D38999 Type
USB Connectors

233-341
SuperSeal MIL-DTL-38999 Series III Type Connectors
USB 2.0/3.0 Type A or B Receptacle
to Size 22D Crimp Removable Contacts Size 15
USB
Performance
2 = 2.0
3 = 3.0

Connector
Style

Basic
Number

(See Below)

233-341

NF 00 - 15

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

Shell Size
15

USB
Orientation
H = Horizontal
V = Vertical

Shrink Boot
Part No. 770-028
(Omit for None)

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

USB
Interface Type
A = Type A
B = Type B

USB 2. 0
Special Arrangement
4 x Size 23 Cavities
(Type A)

Connector Styles
00 = Receptacle, Wall Mount
with Slotted Holes
07 = Receptacle, Jam Nut Mount
G6 = Plug

Jam Nut Receptacle

Front View

Square Flange Receptacle

Rear View

Plug
Front View

1.300 (33.02) Max

.823 (20.90)
.768 (19.51)

USB 3. 0
Special Arrangement
9 x Size 23 Cavities
(Type A)

USB Orientation Options

(Partial Views Shown)

Receptacle

Plug

Horizontal

1.300 (33.0) Max

.085 (2.16)
Max
Gromme t

1.280 (32.51)
Max

(20.40)
.803
.797 (20.24)

Vertical

All External Dimensions,

Features, etc. compliant with
D38999/20, /24 & /26.
Consult Factory for Additional Information
2013 Glenair, Inc.

1.300 (33.02) Max

.890 (22.61) Max
.579 (14.71)
.555 (14.10)

Vertical

Horizontal

Square Flange Receptacle

Jam Nut

Plug

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-7

E-Mail: [email protected]

D38999 Type
USB Connectors

233-342
SuperSeal MIL-DTL-38999 Series III Type Receptacles
USB 2.0/3.0 Type A or B Receptacle
to PC Tail Termination Size 15

Basic
Number

233-342

USB
Performance
2 = 2.0
3 = 3.0

Connector
Style
(See Below)

NF 00 - 15

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

Shell Size
15

USB
Orientation
H = Horizontal
V = Vertical

USB
Interface Type
A = Type A
B = Type B

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

Connector Styles

Jam Nut Receptacle

Front View

Square Flange Receptacle

Rear View

.175 (4.45)
.125 (3.18)
.030 (0.76)
4x .022 (0.56)
(USB 2.0)

.098 (2.49)
.083 (2.11)
Square Flange Receptacle

Receptacle

Horizontal

USB 3.0 (Type A)

.030 (0.76)
9x .022 (0.56)
(USB 3.0)

(Partial Views Shown)

1
2

Characters Shown for

Reference Only
3

USB Orientation Options

1.075 (27.31)
Max
.890 (22.61)
Max
.579 (14.71)
.555 (14.10)

.175 (4.45)
.125 (3.18)
.030 (0.76)
4x .022 (0.56)
(USB 2.0)

Characters Are Shown

for Reference Only

USB 2.0 (Type A)

Characters Are Shown

for Reference Only

2013 Glenair, Inc.

4
1

9
1

.030 (0.76)
9x .022 (0.56)
(USB 3.0)

Vertical
All External Dimensions,
Features, etc. compliant with
D38999/20, /24 & /26.
Consult Factory for Additional Information

.980 (24.89)
Max
.823 (20.90)
.768 (19.51)

00 = Receptacle, Wall Mount

with Slotted Holes
07 = Receptacle, Jam Nut Mount

Jam Nut

.122 (3.10)
.083 (2.11)

U.S. CAGE Code 06324

USB 2.0 Type A

USB 3.0 Type A

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-8

E-Mail: [email protected]

D38999 Type
USB Connectors

233-343
SuperSeal MIL-DTL-38999 Series III Type Receptacles
USB 2.0/3.0 Type A or B Receptacle
to Solder Cup Termination Size 15

USB
Interface Type
A = Type A
B = Type B

Connector
Style

Basic
Number

(See Below)

233-343

NF 00 - 15

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

Shell Size
15

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

USB
Performance
2 = 2.0
3 = 3.0

USB
Orientation
H = Horizontal
V = Vertical

Connector Styles
00 = Receptacle, Wall Mount
with Slotted Holes
07 = Receptacle, Jam Nut Mount

Jam Nut Receptacle

Front View

4x .055 (1.40)
.051 (1.30)
USB 2.0

.098 (2.49)
.083 (2.11)
Square Flange Receptacle

Receptacle

Horizontal

.175 (4.45)
.125 (3.18)

9x .055 (1.40)
.051 (1.30)
USB 3.0

(Partial Views Shown)

1.075 (27.31)
Max
.890 (22.61)
Max
.579 (14.71)
.555 (14.10)

.175 (4.45)
.125 (3.18)

Characters Are Shown

for Reference Only

Characters Shown for

Reference Only
3

USB 2.0 (Type A)

Characters Are Shown

for Reference Only

1
4

4
1

2
5

9
1

9x .055 (1.40)
.051 (1.30)
USB 3.0

Vertical

2013 Glenair, Inc.

4x .055 (1.40)
.051 (1.30)
USB 2.0
3

All External Dimensions,

Features, etc. compliant with
D38999/20, /24 & /26.
Consult Factory for Additional Information

USB Orientation Options

USB 3.0 (Type A)

.980 (24.89)
Max
.823 (20.90)
.768 (19.51)

Jam Nut Receptacle

Rear View

Jam Nut

.122 (3.10)
.083 (2.11)

U.S. CAGE Code 06324

USB 2.0 Type A

USB 3.0 Type A

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-9

E-Mail: [email protected]

D38999 Type
USB Connectors

233-344
SuperSeal MIL-DTL-38999 Series III Type Connectors
Size 22 Pin or Socket Contacts to
USB 2.0/3.0 Type A or B Receptacle Size 15

Basic
Number

233-344

Connector
Style
(See Below)

Insert
Arrangement
IAW
MIL-STD-1560

NF 00 - 15 35

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

Shell Size
15

USBInterface
Type
A = Type A
B = Type B

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

USB
Performance
2 = 2.0
3 = 3.0

Contact
Style
P = Pin
S = Socket

Connector Styles
00 = Receptacle, Wall Mount
with Slotted Holes
07 = Receptacle, Jam Nut Mount
G6 = Plug

Receptacle
Front View

All External Dimensions,

Features, etc. compliant with
D38999/20, /24 & /26.
Consult Factory for Additional
Information.
Size 17 shells also available.
Consult factory, refer to P/N 233-361.

Plug
Front View

1.550 (39.37) Max

.823 (20.90)
.098 (2.49)
.768 (19.50)
.083 (2.11)

41

Square Flange Receptacle

1.550 (39.37) Max
.890 (22.61) Max
.579 (14.71)
.555 (14.10)

1.550 (22.61) Max

1.280 (32.51
Max

Jam Nut
2013 Glenair, Inc.

Plug
U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-10

E-Mail: [email protected]

D38999 Type
USB Connectors

233-360
SuperSeal MIL-DTL-38999 Series III Type Receptacles
USB 2.0/3.0 Plug-to-Receptacle or
Receptacle-to-Receptacle Coupler Size 17

Basic
Number

233-360

Connector
Style
(See Below)

USB
Performance
2 = 2.0
3 = 3.0

NF 00 - 17

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE

Shell Size
17

USB Back
Interface Type
A = Type A
B = Type B

USB Front
Interface Type
A = Type A
B = Type B

USB
Orientation
H = Horizontal
V = Vertical

Shrink Boot
Part No. 770-028
(Omit for None)

Alternate Key Position

Per MIL-DTL-38999
A, B, C, D, E
N = Normal

Connector Styles
00 = Receptacle, Wall Mount
with Slotted Holes
07 = Receptacle, Jam Nut Mount

1.550 (39.37)
MAX

Square Flange Receptacle Jam Nut Receptacle

Front View
Front View

.098 (2.49)
.083 (2.11)

41

.063/.250 (1.60/6.35)
Panel Accommodation
This Side Only
Square Flange Receptacle

USB Orientation Options

(Partial Views Shown)

1.550 (39.37)
MAX
.890 (22.61)
Max

Receptacle

.650 (16.51)
.600 (15.24)

.579 (14.71)
.555 (14.10)

All External Dimensions,

Features, etc. compliant with
D38999/20, /24 & /26.
Consult Factory for
Additional Information

Horizontal

1
4

Vertical

Jam Nut
2013 Glenair, Inc.

U.S. CAGE Code 06324

.122 (3.10)
.083 (2.11)
.250 (6.35) Max Panel Accommodation
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

C-11

E-Mail: [email protected]

SERIES 80 MIGHTY
MOUSE FIELDREADY MICRO USB

S E R I E S 8 0 M I G H T Y M O US E M I CRO USB

SUPERSEAL

Series 801 Mighty Mouse connectors with

superior sealing, shielding and crimp contact
termination

Features
Superior sealingIP68 when matedfor complete system protection against
water, sand and dust
Shielded/grounded coupler designs in both receptacle and plug connectors
Crimp contact termination
Integrated banding porch or connector accessory interface
Micro USB B plugs and universal AB receptacles
Double-start stub ACME threaded coupling standard.
Consult factory for available QDC push-pull and triple-start
threaded versions
Less than half the size and weight compared to
MIL-DTL-38999 type solutions

Mighty Mouse
Micro USB

SuperSeal Mighty Mouse Series 801

Micro USB Connectors

Product Selection Guide

Preliminary Performance Specifications

Connector test and performance specifications per
MIL-DTL-38999, Universal Serial Bus and other
applicable standards.
Size #23 Contacts and Tools
Size #23 Pin Contacts for use with the Micro-B USB
connectors in this catalog, plus appropriate tools and
termination instructions.
801-082 and 801-083
SuperSeal Mighty Mouse Series 801 Plugs
with Micro B USB Plug and
Rear Crimp Contact Wire Termination
801-084 and 801-085
SuperSeal Mighty Mouse Series 801 Receptacles
with Micro AB USB Receptacle with
Rear Crimp Contact Wire Termination

801-087 and 801-088

SuperSeal Mighty Mouse Series 801 Plugs
with Front and Rear Micro B USB Plugs

801-089 and 801-090

SuperSeal Mighty Mouse Series 801 Receptacles
with Front and Rear Micro AB USB Receptacles

801-091
SuperSeal Mighty Mouse Series 801
Sav-Con Connector Saver with
Micro B USB Plug and Micro AB USB Receptacle
2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-1

E-Mail: [email protected]

Mighty Mouse
Micro USB

SuperSeal Mighty Mouse Series 801

Micro USB Connectors
Materials and Performance Specifications

Material and Finishes:

Shell/coupling High strength aluminum alloy

Plating Cadmium olive drab over electroless nickel; Nickel PTFE; Electroless nickel
Contacts Copper alloy, gold plated
USB insulator LCP
Seals Silicon-based elastomer
Stainless steel and other materials and finishes available.
Please consult factory.

Shell Type and Sizes:

Mating Double-start stub ACME threaded, QDC push-pull, and

triple-start threaded
Size Shell size 8

Micro USB Electrical Specifications:

Voltage Rating 30 VAC (rms)

Current Rating Signal pins 1.0A, Power pins 1.8A
D.W.V. 600 VAC
Shield Continuity Continous through coupler or
continous coupler to shell

Environmental / Mechanical Performance

Sealing IP68 mated condition

Operating Temperature Range -40C to +125C
Vibration 37 gs
Mechanical Shock 300 gs
Mating Cycles 10,000

Options:

Complete range of protective covers, both metal and rubber are available

UP TO 71% WEIGHT SAVINGS!

UP TO 52% SIZE SAVINGS!

Crimp Contact Pin Layout

1
5

Series 801
Mighty Mouse
Micro USB
2

4
3

Pin Number

USB
Designation

Typical
Wiring
Assignment

VBUS
DD+
ID
GND
SHIELD

RED
WHITE
GREEN
RA_PLUG_ID
BLACK
DRAIN WIRE

1
2
3
4
5
SHELL
2013 Glenair, Inc.

MIL-DTL-38999 Type
RJ45

The series 801 connector offers up to 71% weight

savings and 52% size reduction when compared to a
D38999 Series III connector.
U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-2

E-Mail: [email protected]

Mighty Mouse
Micro USB

SuperSeal Mighty Mouse Series 801

Micro USB Connectors

Performance Specifications - Preliminary Data

PERFORMANCE SPECIFICATIONS: PRELIMINARY DATA
Test Description

Dielectric withstanding voltage

Insulation resistance

Contact resistance

Mating durability

Contact retention

Vibration and Shock

Temperature cycling

Salt spray

Procedure Per
MIL-DTL-38999 Or
Other Standard
4.5.11.1 or 4.5.11.2
IAW EIA-364-20,
Method A

Performance Requirements/Specifications
Maximum leakage current = 2 milliamperes
No evidence of electric breakdown or flashover
At ambient temperature: >5000 megohms between any pair of
contacts and between any contact and the shell.
after altitude immersion = 1000 megohms min.
after humidity = 100 megohms min.
At elevated temperature: >1000 megohms
Terminal-to-terminal resistance of mated connector contacts
shall not exceed 0.050 ohms.
500-1000 cycles depending on plating, with no mechanical
damage. Dielectric, contact resistance and air pressure
requirements as described above shall be met after 500-1000
mating cycles.
Individual contacts capable of withstanding at least 10 pounds
axial load applied uniformly at one pound per second.
37 g's random vibration, 300 g's shock. No electrical
discontinuity, no disengagement of mated connectors, backing
off of the coupling mechanism, or evidence of cracking,
breaking, or loosening.
-65C to 175C or 200, depending on finish. No blistering,
peeling or separation of plating or other damage detrimental to
the operation of the connector.
5% solution, 3436C. 481000 hours, depending on finish.
Unmated connectors show no lifting of plated coating or
exposure of basis material under 3X magnification which
adversely affects performance.

Humidity

Cycle wired, mated connectors between 25 C at 80 % and 65 C

at 50 %. Ramp time = 0.5 hour, dwell = 1.0 hour. 24 cycles.

Water immersion

1 Meter for 1 Hour, mated.

EMI Shielding

Series 801: Good

Series 804: Very Good
Series 805: Excellent

4.5.10.1 and 4.5.10.2

IAW EIA-364-21

4.5.14

4.5.8

IAW EIA-364-29

4.5.23
4.5.4
EIA364-32,
Test condition A
4.5.13
EIA-364-26
4.5.26
EIA364-31,
Method IV
MIL-STD-810
Method 512
4.5.28
EIA-364-66

Electrical Specs - Plug:

Electrical Specs - Receptacle:

IEC Compatibility (EN61000-4)

IEC Compatibility (EN61000-4)

61000-4-2 (ESD): Air Gap And HBM - 15kV, Contact - 8kV

61000-4-2 (ESD): Air Gap And HBM - 15kV, Contact - 8kV

Bi-Directional Configuration

Bi-Directional Configuration

Ultra Low Leakage Current

Ultra Low Leakage Current

2013 Glenair, Inc.

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-3

E-Mail: [email protected]

Mighty Mouse
Micro USB

Series 80 Mighty Mouse

Contacts and Tools
Size #23 Crimp Contacts

SIZE #23 CRIMP CONTACTS

Standard size #23 contacts accept #22 to #28 AWG wire. Choose "small bore" versions for #26 to #30
AWG wire. For thermocouple applications, specify alumel or chromel contacts. Contacts are bulk
packaged. Terminate with standard M22520 crimper with special positioner.
Contact
Type
Pin
Pin

#23 Pin Contact

Wire Size Material

#22 #28 BeCu
#26 #30 BeCu

Part Number
809-001
809-042

.289 (7.34)
.283 (7.19)

A
In.
mm.
.0335-.0355 0.851-0.902
.0229-.0245 0.582-0.622
.165 (4.19)
.160 (4.06)

Crimp Tensile Strength

.048 (1.22)
.044 (1.12)

.034 (0.86)
.029 (0.74)
SPHERICAL RADIUS
.015 (0.38) MAX FLAT

.0275 (0.699)
.0265 (0.673)

Color Tool
Band Code
None A, C
Blue A, D

COLOR
BAND

.056 (1.42)
MAX

Values are in pounds and are minimums.

Wire
Gage
#22
#24
#26
#28
#30

Silver or Tin
Coated Copper
Wire
12
8
5
3
1.5

Nickel
Coated
Copper Wire
8
6
3
2
1.5

Material and Finish

Beryllium copper alloy per ASTM B196 or B197, 50 microinches gold plated per ASTM B488 Type II
Code C Class 1.25 over nickel plate per QQ-N-290 Class 2, 50-100 microinches.
Thermocouple contacts: alumel or chromel alloy, unplated, per ANSI 96.1

Specifications

Current Rating: 5 Amps maximum

Voltage Drop (at 5 Amps and 25 C): 70 millivolts maximum
Temperature Range: -65 to + 200 C

MINIATURE ADJUSTABLE CRIMP TOOL AND POSITIONER

Standard M22520/2-01 crimper for use with standard size #23 Mighty Mouse contacts. Performs precision
eight-indent crimps for gas-tight wire terminations and excellent tensile strength. Adjustment wheel
has 8 settings. Ratchet mechanism prevents improper crimps. Length is 6.75 inches, weight is approx.
10 oz. Bayonet-type positioner 809-005 hold contacts at correct height for crimping. Check calibration
with M22520/3 gages.

D
Tool
Part Number
Crimp
809-015
Tool
Positioner 809-005

2013 Glenair, Inc.

Military Part
Number

Daniels Part
Number

Tool Code

M22520/2-01

AFM8

(none)

K1461

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-4

E-Mail: [email protected]

Mighty Mouse
Micro USB

Series 80 Mighty Mouse

Contacts and Tools

Size #23 Crimp Contact Instructions

HOW TO TERMINATE, INSTALL AND REMOVE SIZE #23 CONTACTS

Set Up Crimp Tool. Install proper positioner into

crimp tool. The label on the positioner shows
the proper tool setting for each wire size. Turn the
adjustment wheel to the correct setting.

Strip Wire. Remove wire insulation, taking care

to avoid nicking or cutting wire strands. Strip
wire to length shown.

Adjustment Wheel
.145/.155
(3.68/3.94)

1
Crimp Tool

Insert wire into contact. The wire should be

visible in the inspection hole.

Insert contact into crimp tool as shown. Make

sure that the contact is fully inserted into
the tool. Squeeze handle completely. The ratchet
mechanism will not allow a partial crimp. Release
handle and remove contact.

Positioner
INSPECTION
HOLE

Inspect crimped contact. Wire should be fully

inserted and the crimp should be uniform in
appearance.

Insertion/Extraction Tool 809-088

EXTRACTION TIP
WHITE END

INSERTION TIP
BLUE END

Install contact into connector. Push the contact

through the rear grommet until the contact
locks into place. This can usually be done by hand
without the need for a tool. If the wire gage is #26
or smaller, a tool is helpful. There are two techniques
for installing contacts with a tool. One method is to
push the contact in by hand, then use the tool to
finish the insertion. The other method is to position
the insertion tip against the contact shoulder,
then insert the contact. Use insertion/extraction
tool 809-088 to install contacts. Slide the wire into
the groove on the blue end of the tool. Slide the
tool tip up the contact until it touches the contact
shoulder. USE CARE TO AVOID DAMAGING THE
CONNECTOR.

CONTACT
RETAINER CLIP

RUBBER
GROMMET

Contact Extraction. Use tool 809-088. The white

end is used for contact extraction. First, push
the wire into the groove of the metal tip. Slide the
tip of the tool into the connector. Push the tool into
the connector cavity until the tip bottoms in the
connector. Avoid wiggling or rocking the tip. This may
damage the cavity. A straight push is best. Pinch the
wire between your finger and the white plastic grip
and slide the tool and contact out of the connector.
Wire insulation diameter greater than 0.045 inches
(1.14mm) is too large to work properly with the
extraction tool. connector damage is possible.

2013 Glenair, Inc.

RETAINER
TINE

RUBBER
GROMMET

U.S. CAGE Code 06324

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-5

E-Mail: [email protected]

Mighty Mouse
Micro USB

801-082 and 801-083

SuperSeal Mighty Mouse Series 801 Plugs
with Micro B USB Plug and
Rear Crimp Contact Wire Termination
Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE
ZNU = Black Zinc Nickel

Basic Number
801-082 = Shield Termination Porch
801-083 = Accessory Threads

801-082 - 16 MUSB - M
Plug, Micro B
USB Front and
Crimp Rear View

Shell Style
16 = Plug with Anti-Decoupling Spring
26 = Self-Locking Plug with Rachet Mechanism

A
Alternate Key Position
A, B, C, D, E, F

B Thread
.5000-.05P-.1L-DS-2B

.443
11.25)

D- D+

ID

.073
(1.85)

Rear Grommet
View

D- D+

D Thread
.5000-28 UNEF-2A

.443
11.25)

G
ID

These Plug Connectors

Mate with Glenair
Receptacles 801-084,
801-085, and 801-090

.845 (21.46)

801-082 Micro USB Plug B

with Shield Termination Porch

.750 (19.05) Style 16

.830 (21.08) Style 26

.750 (19.05) Style 16

.830 (21.08) Style 26

.073
(1.85)

Rear Grommet
View

.845 (21.46)

801-083 Micro USB Plug B

with Accessory Threads
Plug and Receptacle Key Positions

Schematic
Rear Grommet
Side
Cable
L A BE L Color (Typ)
V
RE D
G
BL ACK
DW HITE
D+
GREEN
NONE
ID

2013 Glenair, Inc.

I D.
1
2
3
4
5

Mating Side

150

210

Micro USB Pin

Description
V B US
DD+
ID
GND
Shell Ground

75

210

95

230

140

275

75

275

95

210

U.S. CAGE Code 06324

B A

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-6

E-Mail: [email protected]

Mighty Mouse
Micro USB

801-084 and 801-085

SuperSeal Mighty Mouse Series 801 Receptacles
with Micro AB USB Receptacle with
Rear Crimp Contact Wire Termination

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE
ZNU = Black Zinc Nickel

Basic Number
801-084 = Shield Termination Porch
801-085 = Accessory Threads

Square Flange
Mount, MIcro AB
USB Receptacle

Rear Panel
Jam Nut Mount, MIcro
AB USB Receptacle
Micro-AB USB accepts
both Micro-A and
Micro-B plugs.

801-084 - 02 MUSB - M

Shell Style

Alternate Key
Position
A, B, C, D, E, F

.900 (22.86)
.430
(10.92)
Max
.060
(1.52)

02 = Square Flange Mount Receptacle

07 = Jam Nut Mount Receptacle

.443 (11.25)

These Micro AB
Receptacles Mate
with Glenair
Plugs 801-082,
801-083, 801-087
and 801-088

ID D+ DG V

.125 (3.18)

Crimp Termination
Rear View

801-084-02
Square Flange Mount Receptacle
with Shield Termination Porch

1.060 (26.92) Max

.430
(10.92)
.100 (2.54)
Max
Max Panel

.900 (22.86)
.430
(10.92)
Max
.060
(1.52)

Rear Grommet
View
1.060 (26.92) Max
.430
.100 (2.54)
(10.92)
Max Panel
Max
Thickness

Thickness

.060
(1.52)

.060
(1.52)
.443
(11.25)

.443 (11.25)
.125
(3.18)
801-085-02
Square Flange Mount Receptacle
with Accessory Threads

801-084-07
Jam Nut Mount Receptacle
with Shield Termination Porch

801-085-07
Jam Nut Mount Receptacle
with Accessory Threads

Schematic

.546 (13.87)
.542 (13.77)
.567
(14.40)
Recommended
Panel Cutout
2013 Glenair, Inc.

Mating Side

Rear Grommet
Side
Cable
L A BE L Color (Typ)
V
RE D
G
BL ACK
DW HITE
D+
GREEN
NONE
ID

I D.
1
2
3
4
5

Micro USB Pin

Description
V B US
DD+
ID
GND
Shell Ground

U.S. CAGE Code 06324

.545 .712
(13.84) (18.08)
SQ
BSC

4 X .090/.096 (2.29/2.44)
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-7

E-Mail: [email protected]

Mighty Mouse
Micro USB

801-087 and 801-088

SuperSeal Mighty Mouse Series 801 Plugs
with Front and Rear Micro B USB Plugs

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE
ZNU = Black Zinc Nickel

Basic Number
801-087 = Shield Termination Porch
801-088 = Accessory Threads

801-087 - 16 MUSB - M
Plug, Micro B USB
Front and Rear View

Shell Style
16 = Plug with Anti-Decoupling Spring
26 = Self-Locking Plug with Rachet Mechanism

These Plugs Mate with

Glenair Receptacles
801-084 and 801-085

A
Alternate Key Position
A, B, C, D, E, F

1.000 (25.4) Max

2 Wire Holes
at 180
-16 Style Only

.750 (19.05) Style 16

.830 (21.08) Style 26

.445
(11.30)

Face view of Plug Adapter as

viewed from engaging end

801-087 Micro USB Plug B

with Termination Porch

.960 (24.38) Max

2 Wire Holes
at 180
-16 Style Only

.750 (19.05) Style 16

.830 (21.08) Style 26

Face view of Plug Adapter as

viewed from engaging end

801-088 Micro USB Plug B

with Accessory Threads

Receptacle Panel Cutouts

Plug and Receptacle Key Positions

150

210

75

210

95

230

140

275

75

275

95

210

2013 Glenair, Inc.

.546 (13.87)
.542 (13.77)
B A

.567
(14.40)
Recommended
Panel Cutout
U.S. CAGE Code 06324

.545 .712
(13.84) (18.08)
SQ
BSC

4 X .090/.096 (2.29/2.44)
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-8

E-Mail: [email protected]

Mighty Mouse
Micro USB

801-089 and 801-090

SuperSeal Mighty Mouse Series 801 Receptacles
with Front and Rear Micro AB USB Receptacles

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE
ZNU = Black Zinc Nickel

Basic Number
801-089 = Shield Termination Porch
801-090 = Accessory Threads

Jam Nut
Receptacle

Inline
Receptacle

Square Flange
Receptacle

801-089 - 02 MUSB - M

Shell Style

Alternate Key
Position
A, B, C, D, E, F

01 = In Line Receptacle
02 = Square Flange Front or
Rear Mount Receptacle
07 = Jam Nut Rear Mount Receptacle

Equipped with Micro AB

USB Receptacles,
Front and Rear

These Receptacle Connectors Mate with Glenair Plugs

801-082 and 801-083
Integral Banding Porch Versions

1.060 (26.92) Max

.900 (22.86) Max

.430
(10.92)
Max
.060
(1.52)

.900 (22.86) Max

.430
(10.92)
Max
.060
(1.52)

.445
(11.30)

.445
(11.30)

801-089-01 Inline

.060
(1.52)

Accessory Thread Versions

2013 Glenair, Inc.

.060
(1.52)

.400
(10.16)
Max

.100 (2.54) Max

Panel Thickness

.445
(11.30)

.445
(11.30)

801-089-01 Inline

801-089-07 Jam Nut

Rear Mount

1.060 (26.92) Max

.900 (22.86) Max

.430
(10.92)
Max
.060
(1.52)

.100 (2.54) Max

Panel Thickness

.445

801-089-02 Square Flange

Front or Rear Mount

.900 (22.86) Max

.430
(10.92)
Max
.060
(1.52)

.430
(10.92)
Max

801-089-02 Square Flange

Front or Rear Mount
U.S. CAGE Code 06324

D
801-089-07 Jam Nut
Rear Mount
Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-9

E-Mail: [email protected]

Mighty Mouse
Micro USB

801-091
SuperSeal Mighty Mouse Series 801

Sav-Con Connector Saver with

Micro B USB Plug and Micro AB USB Receptacle

Basic Number
801-091 = Plug/Receptacle
Sav-Con Connector Saver

Finish
NF = Cadmium Olive Drab
M = Electroless Nickel
MT = Nickel PTFE
ZNU = Black Zinc Nickel

801-091 - MUSB - M

A
Alternate Key
Position
A, B, C, D, E, F

1.250 (31.75) Max

2x .031/.027
(0.79/0.69)
Safety Wire Holes

.750
(19.05)

Face View Of Receptacle

As Viewed From Engaging End.

Receptacle
Side

Self-locking
Plug Side

Face View Of Plug

As Viewed From Engaging End.

801-091
Mighty Mouse Sav-Con Connector Saver
Micro-B USB Receptacle/Plug
with Self-Locking Coupling Nut

Receptacle Side Equipped

with Micro AB USB
Receptacle

Plug Side Equipped

with Micro B USB
Receptacle

Alternate Key Positions

Schematic
Mating Side

Rear Grommet
Side

Cable
L A BE L Color (Typ)
V
RE D
G
BL ACK
DW HITE
D+
GREEN
NONE
ID

2013 Glenair, Inc.

I D.
1
2
3
4
5

Micro USB Pin

Description
V B US
DD+
ID
GND
Shell Ground

U.S. CAGE Code 06324

150

210

75

210

95

230

140

275

75

275

95

210

B A

Printed in U.S.A.

GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com

D-10

E-Mail: [email protected]

FED-STD-33446
DESERT TAN

SEMPER TAN

The permanent FED-STD-33446

Desert Tan solution

Maintenance-Free Desert Tan Cables, Conduits,

Junction Boxes and More
Recently, a Glenair customer requested a FED-STD-33446 desert tan version
of our popular high-temperature annular tubing (hylar or trade name Kynar).
Glenair was able to produce the product shown above in just a few short
weeks and it is now being used in a military vehicle application. The tubing is
now part of our new Semper Tan series of interconnect components. Semper
Tan is a permanent FED-STD-33446 Desert Tan solution that eliminates the
costly labor of manually painting and maintaining standard cables, conduit
assemblies, and junction
boxes used in military
applications. Please consult
the factory for innovative
Semper Tan solutions.
CONNECTORS, CABLES AND ACCESSORIES

Glenair, Inc.
1211 Air Way
Glendale, CA
91201-2497
818-247-6000
[email protected]
www.glenair.com

Why Choose

GLENAIR?
O
Custuo tstandin
mer S g
ervice
!
rials!

w Mate
ty of Ra

Plen

sembly!

In-House As
Abundant Machining Capacity!

Huge

Same-

Day In

ventory

One of North
Americ
and Machin a's
ing

State-of-the-A

rt Plating Cap

Injection
n
o
i
t
c
u
d
o
High-Pring Equipment
Mold

abilities

xperienced
The Industry's Most Eng Specialists
eldi
EMI/RFI Braided Shi

Largest CNC
Installations Milling

d Printed
n
a
y
a
r
r
A
r
e
s for Filt
Clean Room cuit Board Assembly
Cir

Out of This World

INTERCONNECT
SOLUTIONS
Glenair, Inc.

1211 Air Way Glendale, California 91201-2497

Telephone: 818-247-6000 Fax: 818-500-9912 [email protected]
www.glenair.com
Glenair Power
Products Group
860 N. Main Street Extension
Wallingford, CT
06492

Glenair Microway Systems

7000 North Lawndale Avenue
Lincolnwood, IL
60712

Glenair Electric GmbH

Schaberweg 28
D. 61348 Bad Homburg
Germany

Glenair Italia S.p.A.

Via Del Lavoro, 7
40057 Quarto Inferiore
Granarolo dellEmilia
Bologna, Italy

2013 Glenair, Inc.

Telephone:
203-741-1115
Facsimile:
203-741-0053
[email protected]

Glenair UK Ltd
40 Lower Oakham Way
Oakham Business Park
P.O. Box 37, Mansfield
Notts, NG18 5BY England

Telephone:
+44-1623-638100
Facsimile:
+44-1623-638111
[email protected]

Telephone:
847-679-8833
Facsimile:
847-679-8849

Glenair Nordic AB
Gustav III : S Boulevard 46
S - 169 27 Solna
Sweden

Telephone:
+46-8-50550000
Facsimile:
+46-8-50550001
[email protected]

Telephone:
06172 / 68 16 0
Facsimile:
06172 / 68 16 90
[email protected]
Telephone:
+39-051-782811
Facsimile:
+39-051-782259
[email protected]

Printed in U.S.A.

Glenair Iberica
C/ La Vega, 16
45612 Velada
Spain

Glenair France SARL

7, Avenue Parmentier
Immeuble Central Parc #2
31200 Toulouse
France

Telephone:
+34-925-89-29-88
Facsimile:
+34-925-89-29-87
[email protected]
Telephone:
+33-5-34-40-97-40
Facsimile:
+33-5-61-47-86-10
[email protected]