Scribd
Upload
359 views8 pages

3511071HiTag2 Manual Eng

This document provides information about the HiTag-2 Universal keys programmer. It can program all types of Hitag2 transponders and supports a wide range of car makes that use the Hitag2 protocol. The programmer allows generating keys from transponder dumps and programming blank keys or transponders by writing all necessary data from the dump. It supports programming transponder configuration bytes and has options for reading and writing transponder memory pages and encryption modes.

Uploaded by

Electronicar Marcelo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
359 views8 pages

3511071HiTag2 Manual Eng

This document provides information about the HiTag-2 Universal keys programmer. It can program all types of Hitag2 transponders and supports a wide range of car makes that use the Hitag2 protocol. The programmer allows generating keys from transponder dumps and programming blank keys or transponders by writing all necessary data from the dump. It supports programming transponder configuration bytes and has options for reading and writing transponder memory pages and encryption modes.

Uploaded by

Electronicar Marcelo
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Universal HiTag-2 programmer.

1 December, 2009

PHILIPS
HiTag2 Universal keys programmer
v. 3.1

() 2005-2011

HiTag-2 Universal keys programmer.


Purpose:
Hitag-2 programmer is universal key programmer, with additional option of key programming from dump.
Just insert blank key or appropriate transponder you need to program. Device detects transponder type and will do
everything automatically!

Distinctive features of Hitag2 programmer:

ALL types of Hitag2 transponders are fully supported


Widest range of supported cars, using Hitag2 protocol
Deep research work, has allowed us to make device, as much as possible correctly adding keys in the car,
without damage to its functionality!

Key generation from dump is available for the following cars:

Make

BMW
AUDI
VW
PORSCHE
BENTLEY
CHRYSLER
LAND ROVER
NISSAN
OPEL
RENAULT
SAAB

Immobilizer type

EEPROM/MCU

Login is visible

Radio remote
programming
possibility

Cars for USA


market are
supported

CAS1/2/3/3+
KESSY
KESSY
KESSY
KESSY
SKIM
EWSx
NATS
CIM
UCH
CIM

912/9S12
93C86
93C86
93C86
93C86
95040/95080
9S12
95080
9S12/93C66
93C66
93LC66

Yes
Yes
Yes
Yes
Yes
Yes
Yes
-

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes
Yes

Supported transponder types

PCF7936

PCF7941

PCF7942/44

PCF7943

PCF7945

PCF7946

PCF7947

PCF7952

Supported transponder modes:

Password mode
Crypto mode

Supported protocols:

Manchester
Biphase

HiTag-2 Universal keys programmer.


Software window view and description of the buttons:

Load TM & ... - Download "container" with transponder dump and crypto passwords
Load TM only - Download transponder dump only
Save TM as ... - Save "container"
Read all TM pages - To read all of transponder's fields
Write all TM pages - To write all of transponder's fields
Write CFG byte -To read transponder's configuration field
Advanced functions - Key generation by loaded dump
Transponder mode - Transponder's work mode

Password mode - Password mode without additional data encryption

Crypto mode - Data encryption mode


TD coding protocol - Data coding protocol

Manchester - Self-synchronizing protocol with synchro impulses

Biphase - Bi-phase modulated protocol


Exit - Exit
Transponder type - Types of supported transponders
Autodetect type - Autodetecting of transponder type
R - To read exact transponder's field
W - To write exact transponder's field
Read S/N - To identify transponder (read serial number)
Load CRK from... - Download crypto passwords from file
Factory CRK - Set factory default crypto passwords

HiTag-2 Universal keys programmer.


Key generation (Advanced functions):
Key adding procedure is described for BMW E70 as for sample. Other models have identical procedure.
1.

Read EEPROM or MCU dump from immobilizer

2.

Insert blank key/transponder into Hitag2 programmer and press "Read all TM pages" button. Programmer
will

read

all

of

transponder

fields

automatically,

led from

the

right side

should

lit

green

(it

means
transponder is blank and ready to be programmed). If you are using PCF7936 type of transponder switch it
to "Crypto mode" with help of "Write CFG byte" option.
3.

Press [ Advanced functions ] button to access car select menu and available additional options.

Note:
Quantity

of

available

options

directly

depends

of

transponder

type.

For ex.

"Read

Key

info",

control",
"EEPROM data" are unavailable for BMW keys with PCF7936 transponder inside.
4.

Choose "Key maker" option, and load immobilizer dump.

Note:
If you see this reminder (unable to recognize downloaded dump configuration), try to press [Swap bytes] button at
the bottom of the screen.

"Remote

HiTag-2 Universal keys programmer.

5.

If

dump configuration is recognized successfully, you will get the following message:

And HEX-editor windows showing downloaded data will appear.

Purpose of the buttons in "Make key from EEPROM" window:


"Cancel" - return to previous window
"Swap bytes" - Rearrangement of bytes for definition of EEPROM configuration
"Advanced functions" - Additional options (Depending on the version used by you; reception of Login, editing of
VIN-number, editing of mileage)
"Continue" - Transition to programming data in a key or transponder

HiTag-2 Universal keys programmer.

6.

Press [ Continue > ] to start key/transponder programming. You will see the following message. Insert blank
key into programmer and press [ OK ].

7.
Software will verify if inserted key is blank.
8.
If key is blank, software let you to choose key number.
9.
Device will write all necessary key data from dump to key.
10. After that, software suggests you to save new dump.
11. Write new dump back to immobilizer.

Additional options for BMW keys: "Read key info" option:


BMW keys based on PCF7942/44 type transponders contain internal memory in which is stored:

VIN -number
Mileage
Last stored running time
Mechanical key code
Remote frequency
Key number

This data can be read with help of "Read key info" option from option list designed for BMW keys.

Choose desired option;

Refresh info - Reread key data

Close - Close window

HiTag-2 Universal keys programmer.


Additional options for BMW keys: Option "BMW EEPROM data":
Using this option you can read BMW key memory.

Choose desired option;

Read EEPROM - Transponder's EEPROM reading option. There's a block read status at the bottom of the
screen, each one contains 32 bytes of EEPROM. Red indicator means block is closed and cannot be written.

Write EEPROM - Transponder's EEPROM writing option.

Load file... - Load key dump from file.

Save file... - Write key dump into file.

Additional options for BMW keys: Option "BMW Remote control":


In BMW keys unlike of other cars, data of a radio channel are in external EEPROM and can be read/written using
separate function.

Note: Remote control area will be closed after programming and cannot be read anymore!

HiTag-2 Universal keys programmer.


Transponder configuration option "Write CFG byte":
Warning!!! Designed for advanced users only! Unintentionally you can damage key and it cannot be used
anymore!

Bits value explanation:


Dx
D0

Off
Manchester

On
Biphase

Note

D1

not used

D2

not used

D3

Password mode

Crypto mode

D4

PAGE 6 and 7 read/write

PAGE 6 and 7 read only

D5

PAGE 4 and 5 read/write

PAGE 4 and 5 read only

D6

PAGE 3 read/write

PAGE 3 read only, CFG & Pass - fixed!

Only once programmable area!

D7

PAGE 1 and 2 read/write

PAGE 1 no read/no write


PAGE 2 read only (in password mode)
PAGE 2 no read/no write (in crypto mode)

Only once programmable area!

You might also like