Scribd
Upload
212 views

Sample CLI Commands To Use For Triage On McData Sphereon and Intrepid

This document provides examples of commands used to manage and monitor a Fibre Channel switch or director. Some key commands include maint system to clear errors, reset configuration, and set the online/offline state. perf commands display port error counters and OpenTrunking configuration. show commands display configuration, status information, the event log, field replaceable units, port information, and switch attributes.

Uploaded by

rejnan
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
212 views

Sample CLI Commands To Use For Triage On McData Sphereon and Intrepid

This document provides examples of commands used to manage and monitor a Fibre Channel switch or director. Some key commands include maint system to clear errors, reset configuration, and set the online/offline state. perf commands display port error counters and OpenTrunking configuration. show commands display configuration, status information, the event log, field replaceable units, port information, and switch attributes.

Uploaded by

rejnan
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 3

Root> maint system

Root> maint system


is lost when this
Root> maint system
ters to their

clearSysError
ipl
command runs
resetConfig

- clears the system error light.


- IPLs the switch. Connection to the CLI
- resets all NV-RAM configuration parame

default values, including feature keys a


nd IP addresses. Connection to the CLI is
lost when this command runs. This command resets all configuration data and nonvolatile settings, including network information, to their default values (facto
ry
settings).Management access may be lost
until the network information is restored.
Root> maint system setOnlineState true - sets the switch online or offline.
Root> maint system setOnlineState 1
Valid values are true and false. Boole
an 1 and 0 may be substituted as values.
Root> perf AFD show
nder AFD.

- displays all the configured settings u

Root> perf errors 2


gle port.

- displays port error counters for a sin


portNumber Specifies the port number. Valid valu

es are:
0-11 for the Sphereon
0-15 for the Sphereon
0-15 for the Sphereon
0-23 for the Sphereon
0-31 for the Sphereon
0-31 for the Sphereon
0-63 for the Intrepid
0-127 and 132 143 for
Ex. Root> perf errors
Port 2
StatisticCount
--------------------Prim Seq Err753452
Disc Frms351269
Inv Tx Wrds2953184
CRC Errs1842953
Delim Errs2953184
Addr Id Errs1842953
FrmsTooShrt40059
Root> perf openTrunking show 11
iguration per port.

4300
3016 and 3216
4400
4500
3032 and 3232
4700
6064
the Intrepid 6140
2

- displays the current OpenTrunking conf

Root> show all


- displays all configuration and status informat
ion that are available. The command
results in a sequential display of the output of other CLI show commands. This s
et of show
commands returns the full configuration and stat
us of the switch and fabric.
Root> show eventLog
- displays the contents of the event log as main
tained in NV-RAM on the director or
switch.
Root> show frus

- displays information about all field-replaceab

le units (FRUs).
Output Example The output from the show.frus command appears as follows:
FRU Position State Serial Num Part Num Beacon Pwr On Hrs
----- -------- ------ -------------- --------- ------ ---------CTP 0 Active 470-000399-700 123456789 False 2800
CTP 1 Backup 470-000399-700 223456789 True 2801
SBAR 0 Active 470-000399-700 223456789 False 2801
SBAR 1 Failed 470-000399-700 223456789 False 2801
FPM 0 Prwoff
FPM 1 Active 470-000399-700 223456789 False 2801
QPM 3 Active 470-000399-700 223456789 False 831
XPM 2 Degred 470-000399-700 223456789 False 831
UPM 4 Active 470-000399-700 223456789 False 831
Power 0 Active 470-000399-700 223456789 False 831
Fan 0 Active 470-000399-700 223456789 False 831
Root> show port info

- displays port information for all ports.

Root> Show Port opticHealth


- shows the overall optic health for all ports t
hat support Enhanced Digital Diagnostics
(EDD).
Root> show port opticInfo

- displays information about the optic.

Root> show port profile portNumber 138 - displays the port configuration for th
e specified port.
Root> show port showPortAddr
l ports.

- displays the port address configuration for al

Root> show port status

- displays port status for all ports.

Root> show port technology


orts.

- displays port technology information for all p

Root> show switch

- displays the switch attributes.

Show> switch
State: Online
R_A_TOV: 20
E_D_TOV: 4
Preferred Domain Id: 1
Switch Priority: Default
Speed: 2 Gb/sec
Rerouting Delay: Enabled
Interop Mode: Open Fabric 1.0
Active Domain Id: 1
World Wide Name: 10:00:08:00:88:00:21:07
Insistent Domain Id: Enabled
Domain RSCN: Enabled
Zoning RSCN: Disabled
FC Address Domain Id: 67 (hexadecimal)
Limited Fabric RSCN: Disabled
Safe Zoning: Enabled
ISL FSPF Cost: By Port Speed
Web Enabled: Enabled
API Enabled: Enabled
HA Mode: Disalbed
API Management IP: 100.0.0.1
Domain ID offset: 96

Password Exp. Time: 365


Root> show system
- displays a set of system attributes.
System Information
Name: Joe's Switch
Description: McDATA ED-6064 Fibre Channel Director
Contact: Joe
Location: Everywhere
Date/Time: 04/16/2001 10:34:01AM
Serial Number: 82420481
Type Number: 006064
Model Name: ED-6064
Model Number: 001
EC Level: 1011231
Firmware Version: 04.01.00 Build

You might also like