0% found this document useful (0 votes)

868 views

Physics Capsule

ssc cgl physics capsule

Uploaded by

dayakar

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

868 views

Physics Capsule

ssc cgl physics capsule

Uploaded by

dayakar

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 152

or

.co
m

tut

www.sscexamtutor.com

ssc
ex

PHYSICS

or
.co
m

tut

ssc
ex

or
.co
m

CONTENTS

1. Units & Measurement ............................................................................................ 5-6

2. Motion ..................................................................................................................... 7-18

tut

3. Work, Energy and Power .................................................................................. 19-24

4. Gravitation............................................................................................................ 25-27

5. Properties of Matter ............................................................................................ 28-35

6. Space Exploration ............................................................................................... 36-43
7. Simple Harmonic Motion ................................................................................. 44-47

ssc
ex

8. Sound .................................................................................................................... 48-52

9. Optics ..................................................................................................................... 53-65
10. Heat ........................................................................................................................ 66-78
11. Electromagnetic Radiation ................................................................................ 79-83
12. Atomic Physics .................................................................................................... 84-93

13. Astronomy .......................................................................................................... 94-102

14. Communication System ................................................................................ 103-107

15. Electromagnetism ............................................................................................ 108-122

16. Physics at a Glance-I ...................................................................................... 123-152

or
.co
m

tut

ssc
ex

or
.co
m

UNITS &
MEASUREMENT

UNIT

Length

Mass

Time

1. C.G.S. System

Centimetre Gram

Second

2. F.P.S. System

Foot

Pound

Second

3. M.K.S. System

Metre

Kilogram Second

The measurement of a physical quantity

requires a unit and the comparision of unit
to the quantity & the number of the units
obtained gives the measured value of the
quantity e.g. when we say that the length of
a rod is 5 metres it means that the length of
the rod is 5 times the unit of length, metre.

The fixed part of a Physical quantity by

dint of which comparision could be made
of the magnitudes of the same quantity
contained in different substances is termed
as a unit.

Systems of units

tut

All the quantities in terms of which

laws of physics are described and whose
measurement is essential are called physical
quantities like mass, length, time, light,
current electricity, temperature, etc.

International System of Units (S.I.)

ssc
ex

The system is a modification over the MKS system

and hence, is known as rationalised MKS System.
There are seven fundamental and two supplementary units in S. I. System :
Fundamental
Kilogram
Metre
Second
Kelvin
Ampere
Candela
Mole

Supplementary
Physical quantity
1. Plane angle
2. Solid angle

Supplementary Symbol
Unit
Radian
rad.
Steradian
sr

Physical
1. Mass
2. Length
3. Time
4. Tempertature
5. Electric-current
6. Luminous intensity
7. Quantity of matter

Symbol
kg
m
s
K
A
Cd
mol

The units of three quantities viz mass,

length and time are called fundamental
units because all physical quatities can be
expressed in terms of mass, length and
time and remaining all units are called
derived units.

FUNDAMENTAL UNITS

(i) Metre (m) : 1 metre is equal to the

length of the path travelled by light in
vacuum in 1/2 99792458 of a second where
speed of light is 299792458 m/s. Recently,
the definition of 1 metre of length is realized
by using the iodine stabilized helium neon
lasers.
(ii) Kilogram (kg) : A standard block of
Platinum Iridium alloy preserved in the
International Bureau of Weights & Measures
at Sevres, near Paris, France is used as a
prototype of unit of mass and one kilogram
is equal to the mass of this alloy.
(iii) Second (s) : The definition of second
is based on an atomic clock which works
on energy radiation from an isotope of
caesium (Cs-133). One second is equal to
the duration of 9, 192, 631, 770 periods of
Physics

[5]

(iv) 1 micrometre or 1 micron = 106m

(v) 1 nanometre (1nm) = 109m
(vi) 1 Angstrom (1A) = 1010m

For Masses : (i) 1 tonne or 1 metric ton

= 1000 kg
(ii) 1 pound (lb) = 0.4536 kg.

(iii) The largest unit of mass is Chandra

Shekher Limit (C.S.L) 1 C.S.L. = 1.4 times
the mass of the Sun.
(iv) For small masses atomic mass unit
(a.m.u.) is used. 1 a.m.u = 1.6 1027kg.

For Lengths : (i) Astronomical Unit

(A.U) : It is equal to the distance between
the centre of the earth and the centre of the
sun. One A.U. = 1.5 1011m.

or
.co
m

IMPORTANT PRACTICAL UNITS

(iii) Par sec. (Parallactic second) : 1

Par sec = 3.1 1016m = 3.26 ly

tut

radiation corresponding to unperturbed

transition between the two specific energy
levels of the ground gaseous state of Cs133 isotope. The caesium atoms in the
atomic clock act like a pendulum in a
pendulum clock. The atomic clock gives
the most accurate time with an error of 1
second only in 5000 years.

(ii) Light Year (ly) : It is equal to the

distance travelled by light in vacuum in
one year. 1 light year = 9.46 1015m.

ssc
ex

[6]

General Science

For Area : (i) 1 acre = 4047 m2.

(ii) 1 hectare = 104m2.

TYPES OF MOTION

When a particle or a body moves

along a straight path, its motion is
Rectilinear or translatory motion.

(ii)

When a particle or a body moves in a

circular path, its motion is circular
motion. When a body spins about its
own axis, it is said to be in rotational
motion.

ssc
ex

(i)

(iii) When a body moves to and fro or back

and forth repeatedly about a fixed point
in a definite interval of time, it is said to
be in vibrational or oscillatory motion.

The path travelled by an object during its

motion is called trajectory. The actual path
length during the motion is called distance
and, the straight distance between the initial
and final position of the motion in a particular direction is called displacement.
Let a particle travel, starting from point
A and go to point D along the path A B C
D in a given interval of time. The total path
length ( = AB + BC + CD) is the distance
travelled and the shortest path length (AD)
in the direction A to D is the displacement
within the same time-interval.

or
.co
m
SPEED

The time rate of change of position of

an object in any direction i.e. the rate of
change of distance of an object with respect
to time is known as speed.

A body is said to be in motion if it

changes its position with respect to its
surroundings as time goes on. A body is
said to be at rest if it does not change its
position with time, with respect to its
surroundings.

tut

MOTIONS

VELOCITY
The rate of change of displacement of
an object with respect to time is known as
velocity.

Let a square OPQR of side length 2

metre. A particle travels along its side
starting from O to R via P and Q. It takes a
total time of 2 seconds. The total distance
travelled is OP + PQ + QR = 2 + 2 + 2 = 6
metres whereas the total displacement is
OR = 2 metres. Hence

Average Velocity

ACCELERATION
The rate of change of velocity with respect to time is called acceleration.

When the velocity of a body increases,

it has a positive acceleration and when the
velocity decreases, it has a negative acceleration. This negative acceleration is called
deceleration or retardation.
When a body is released from a height,
its velocity increases by 9.8 m/s in every
second and when a body is thrown above
the earths surface, its velocity decreases
by 9.8 m/s in every second. This change in
velocity every second is called acceleration
due to gravity which is denoted by g. Its
average value at the earths surface is 9.8
m/s2. It is always directed towards the
centre of the earth because of the gravitational pull. For a freely falling body, its
acceleration is 9.8 m/s2.

When a body completes equal displacement in equal interval of time, its velocity is
constant and hence, it does not have an
acceleration. When a body shows equal
change in velocity in equal interval of time
its velocity is not constant but it has a
constant acceleration.

or
.co
m

= 3m/s

tut

Average Speed

ssc
ex

EQUATIONS OF MOTION

(i) For a body moving with a uniform

velocity: If a body completes a displacement S in time t with a uniform velocity
V, then,

POSITION (DISPLACEMENT)TIME GRAPHS

(i) For a body moving with a uniform

velocity: This graph comes as a straight
line because in a uniform velocity the
particle completes equal displacement in
an equal interval of time.

displacement = velocity time

...(i)

(ii) For a body moving with a uniform

acceleration : If a body starting with an
initial velocity u moves with a uniform
acceleration a for a time t and attains a
final velocity v after travelling a displacement s then,

and

[8]

General Science

....(iii)
...(iv)

(ii) For the motion of a body thrown

vertically upwards : When the body moves
up, its velocity continuously decreases due
to gravity and finally becomes zero at the
maximum height. Then, the body falls with
an increasing velocity.

or
.co
m

The slope of the position time graph is

equal to the uniform velocity.

The slope of the velocity time graph is

equal to acceleration.
In the figure, slope

VELOCITY-TIME GRAPH

or,

Example 1 : A car is travelling with a

velocity of 20 m/s at a uniform acceleration of 1 m/s2. Find out its velocity after 10
seconds.

For a uniformly accelerated motion the

velocity-time graph is a straight line.

tut

and OB = time (t)

ssc
ex

Solution : Given, the initial velocity = u

= 20 m/s. acceleration = a = 1 m/s2. time
interval = t = 10 seconds.

The area under the velocity-time graph

is equal to displacement.
Displacement = Area under velocity

time graph

= Area of OAB =

= Average velocity (Var.)

Where

AB OB

hence, the final velocity = v = u + at

or v = 20 + 1 10 = 20 + 10 = 30 m/s.

Example 2 : A bus moving at 10 m/s

experiences a constant retardation of 2 m/
s2. due to applied brakes. How much distance does it cover and how much time
does it take before it stops ?
Solution : Given, initial velocity = u =
10 m/s
Final velocity (when the bus stops) = v = 0
retardation = 2 m/s2.
v = u + at or

= 5 sec.

It takes 5 seconds to stop.

V = u + at

Physics

[9]

or
.co
m

or h = gt2
= 50 25 = 25m
or, v2 u2 = 2as

It covers a distance of 25 m before it stops.

Example 3 : A train travelling with an
initial velocity of 4 m/s accelerates uniformly
at a rate of 2m/s2. for 20 seconds. Calculate
the distance covered.

acceleration = a = 2m/s2.
interval of time = t = 20 second

ssc
ex

Displacement,

Solution :
m/s2.

a = g = 9.8 m/s2, u = 98

At the maximum height (h) = s = h and

v=0
v2 u2 = 2as

0 (98)2 = ()2 9.8 h

Solution : Given, the initial velocity = u

= 4m/s

Example 5. A stone is thrown vertically

upwards with a velocity of 98 m/s. What will
be its maximum height attained and time taken
to achieve this height ?

tut

= 25m.

v = u + at
0 = 98 9.8 t or t

= 10 seconds

or s = 80 + 400 = 480m.

Example 4 : A stone is dropped from

rest from the top of a tower. What will be
its velocity after 2 seconds and what is the
height of the tower if the stone falls in 5
seconds onto the ground ?
Solution : Here a = g = 9.8 m/s2.
u=0

Hence, after t = 2 seconds, the stone

has a velocity of v = u + at = u + gt = 0 + 9.8
2 = 19.6 m/s.
Let height of the tower = h

The distance travelled in time = t = 5

sec. will be, s = h

s = ut +

[10]

at2

General Science

PHYSICAL QUANTITIES
(i) Vectors : They have a definite
magnitude and a definite direction, e.g.
displacement, velocity, acceleration, force etc.
(ii) Scalars : They have definite
magnitudes only and not direction. e.g.
distance, speed, work, energy, power,
electric charge etc.
(iii) Tensors : They have different
magnitudes in different directions, e.g.
Moment of interia, stress etc.
In a motion, a body can have a constant
speed but variable velocity like the motion
of a body along a circular path. A particle
may have zero displacement and zero
velocity but non-zero distance and speed.
When a body completes one revolution

NEWTONS LAWS OF MOTION

First Law of Motion

Every body continues to be in a state

of rest or uniform motion in a straight
line, except in so far as it may be compelled by force to change that state.
Newtons first law of motion defines inertia.
1. Inertia of Rest : the inability of a
body to change by itself its state of rest.

When a branch of a fruit tree is shaken,

the fruits fall down. This is because the
branch comes in motion and the fruits
tend to remain at rest. Hence, they get
detached.

The dirt particles in a durree fall off if it

is stricken by a stick. This is because the
striking sets the durree in motion
whereas the dirt-particles tend to remain at rest and hence fall.

When a train starts suddenly, the passenger sitting inside tends to fall backwards. This is so because the lower part
of the passengers body starts moving
with the train but the upper part tends
to remain at rest.

If a smooth paper having a coin on it

placed on a table is suddenly drawn,
the coin remains at the same place on
the table due to inertia of rest.

When a horse starts suddenly, the rider

tends to fall backwards due to inertia
of rest

When a body is thrown horizontally

from a height or dropped from the same
height in both cases it will be reaching to
the ground simultaneously because in both
the cases the body will be acted upon by the
same vertically downward acceleration due
to gravity (g).

or
.co
m

The velocity and acceleration of a body

may not necessarily be in the same direction and may not be zero simultaneously.
The body in equilibrium may be at rest or
may move with a constant velocity. When
a body is thrown upwards, it will go vertically until its vertical velocity becomes zero
and it will return to the ground with the
same velocity with which it was thrown.

Inertia of a body may be inertia of rest,

inertia of motion or inertia of direction.

tut

along a circular path in a given time period,

the net displacement and velocity of the
body will be zero but the distance and
speed of the body must be non-zero.

ssc
ex

A physical quantity having direction

may or may not be a vector e.g. time, pressure, current-electricity, surface-tension etc.
They have direction but are not vectors.

Linear-Momentum : It is the quantity

of motion which a body possesses and is
measured as the product of the mass and
velocity of the body.
Linear momentum = mass velocity.

Impulse : The total change in momentum is called the impulse. If a very large
force acts for a very small time, the product of force and the time is equal to the
impulse.

Inertia : The inability of a body to

change by itself its state of rest or state of
uniform motion along a straight line is
called inertia of the body. The inertia of a
body is measured by its mass. Heavier the
body, greater is the force required to change
its state and hence greater is its inertia.

2. Intertia of Motion : The inability of a

body to change by itself its state of uniform
motion.
Physics

[11]

or
.co
m

When a horse at full gallop stops suddenly, the rider on it falls forward because of inertia of motion of the upper
part of the riders body.

When a knife is sharpened by pressing it against a grinding stone, the

sparks fly off tangentially because
of the inertia of direction.

When an athelete takes a long jump, he

runs first for a certain distance before
the jump. This is because his feet come
to rest on touching the ground and the
remaining body continues to move owing to inertia of motion.

When train stops suddenly, a passenger sitting inside tends to fall forward.
It happens because the lower part of
the passengers body comes to rest with
the train but the upper part tends to
continue its motion due to inertia of
motion.

When a stone tied to one end of a string

is whirled and the string breaks suddenly, the stone spins off along the tangent of its circular path. It happens so
because of the pull in the string was
forcing the stone to move in a circle. As
soon as the string breaks, the pull disappears. The stone becomes free and in
a bid to move along the straight line
flies off tangentially.

3. Inertia of Direction : The inability of a

body to change by itself its direction of motion.

The wheels of any moving vehicle throw

out mud, if any, tangentially, due to
the inertia of direction. The mud-guards
over the wheels stop this mud, protecting the clothes, etc. of the person sitting
on the bike.

Use of an umbrella to protect us from

rain is based on the property of inertia
of direction because the rain drops cannot change their direction of motion.

When a bus or a car rounds a curve

suddenly, the person sitting inside is
thrown outwards. It happens so because the person tries to maintain his
direction of motion due to directional
inertia while the vehicle turns.

Second Law of Motion

A person jumping out of a speeding

train may fall forward due to inertia of
motion of his body. Hence, he should
run a few steps on the platform in the
direction of motion of train.

ssc
ex

tut

[12]

General Science

The rate of change of linear momentum of a body is directly proportional to

the external force applied on the body
and this change takes place always in
the direction of the applied force.
The second law gives us a measure of
force. When a force is applied on a body,
its momentum and hence, velocity change.
The change in velocity produces an acceleration in the body. The rate of change of
linear momentum with time is equal to the
product of the mass of the body and its
acceleration which measures the magnitude of the applied force i.e.

= mass acceleration
or,
When a body is moving with a uniform velocity along a straight line, it neither experience nor require an external
force. This is because, the acceleration is
due to change in the velocity of the body
and the velocity remains constant for a

Application of the change in linear

momentum (impluse) and second law
of motion :
Bogies of a train are provided with the
buffers. These buffers avoid severe jerks
during shunting of the train. Since force
= change in momentum/time and the
time of impact increases due to presence of buffers. Hence, force during
jerks decrease. It results in decrease in
the chances of damage.

Crockery items are wrapped in paper

or straw pieces before packing because
paper or straw acts as buffers. It
changes the time of impact and hence,
avoids the chances of damage during
the jerks.

ssc
ex

In a head-on collision between two vehicles, change in linear momentum is

equal to the sum of the linear momenta
of the two vehicles. Since time impact is
very small, hence an extra large force
develops which results in maximum
damage to the vehicles.

When a person falls from a height on a

concrete floor, the floor does not yield.
The total change in linear-momentum
is produced in a very small interval of
time. Hene, the floor exerts a much
larger force and the person receives
more injury. But when a person falls
on a heap of sand, the sand yields. The
same change in linear momentum is
produced in a much longer time. The
average force exerted on the person by
the heap of sand is, therefore, much
smaller and hence the person is not
hurt.

or
.co
m

When a body changes its velocity or

direction of its motion, its velocity
changes too. It results in an acceleration
which is possible only by the action of
an external applied force. Hence, an accelerated motion is always due to an
external force.

tut

body moving with a uniform velocity along

a straight line.

An athlete should stop slowly, after finishing a fast race, so that the time of
impact of his run increases at stop and
hence, force experienced by him decreases.

In cricket, a player lowers his hands

while catching a cricket ball to avoid
injury. In doing so, he increases the time
of impact of the ball which in turn reduces the effect of the force on his hands.

Shockers in the motor-vehicles reduce the effect of jerk/force by increasing the time of impact of the
jerks given by an uneven road.

Third Law of Motion

To every action, there is always, an

equal and opposite reaction.
Here, the action is the force exerted by
one body on the other body while the reaction is the force exerted by the second body
on the first.
Significance of Third Law : It signifies that forces in nature are always in
pairs. A single isolated force is not possible. Force of action and reaction act always on different bodies. They never cancel each other and each force produces its
own effect. The forces of action and reaction may be due to actual physical contact
of the two bodies or even from a distance.
But they are always equal and opposite.
This third law of motion is applicable
whether the bodies are at rest or they are
in motion. This law is applied to all types
Physics

[13]

or
.co
m

of forces e.g. gravitational, electric or magnetic forces, etc.

of reaction on the jet-plane or rocket in

the forward direction. Consequently,
the jet-plane or rocket moves.

Example and application of the third

law of motion :
A book placed on a table exerts a force
as an action on the table. This action is
equal to the weight of the book. The
table exerts a force of reaction equal
and opposite to the reaction to support
the book.
When a gun fires a bullet, it moves
forward due to a force exerted by the
gun. The bullet exerts a reaction due to
which the gun recoils backward.

We can walk on a ground easily if it is

tough because the ground provides sufficient reaction against our push. But it
is difficult to walk on sand or ice. This
is because on pushing, sand gets displaced and reaction from sandy ground
is very little. In case of ice, force of
reaction is again small, because friction
between our feet and ice is very little.

The total sum of the linear momentum of all bodies in a system remains
constant and is not affected due to their
mutual action and reaction. It means in
a system of the two bodies, the total
momentum of the bodies before impact
is equal to the total momentum of the
two bodies after impact. The law of
conservation of linear momentum is
universal i.e. it applies to both, the microscopic as well as macroscopic system.

ssc
ex

PRINCIPLE OF CONSERVATION
OF LINEAR MOMENTUM

tut

When a rubber ball is struck against a

wall or floor, it exerts a force as an
action on the wall. The ball rebounds
with an equal and opposite force as
reaction exerted by the wall on the ball.

A swimmer pushes the water with a

force of action in backward direction
while water pushes the swimmer with
a force of reaction in the forward direction. Consequently, the swimmer is able
to swim.

When a jet-plane or rocket moves in

the sky, the gases produced due to combustion of fuel escape through the
nozzle in the backward direction due
to the force of action exerted by the
engine. The escaping gases exert a force

[14]

General Science

Some common applications of the

principle of conservation of linear
momentum:

When a person is lying on a frictionless

surface at rest, his momentum is zero.
As soon as he blows air out of his mouth
or throws an object, he moves in the
opposite direction. The total sum of momentum of the person and air blown or
object thrown remains zero due to opposite directions.

When a man jumps out of a boat to

the shore, the boat is pushed slightly
away from the shore. The initial
momentum of the man and boat remains equal to that of the final
value.

The gun must be held tightly to the

shoulder when the gun is fired. It would
save hurting the shoulder

Motion of rocket and jet planes is based

on the conservation of linear momentum.

cycle along a vertical circle in a cage.

The motor cyclist does not fall down
even at the highest point.

A pilot of an aircraft can successfully

loop a vertical loop without falling at
the top of the loop being without belt.

Motion of vehicles on a curved road :

UNIFORM CIRCULAR MOTION

or,
centripetal acceleration (ac)

= vw

ssc
ex

= rw2.

tut

(a) Level Curved Road : A level curved

road is constructed where the speed of
the vehicles is slow. Here, the force of
friction between the road and tyre of
the wheel of the vehicle provides the
necessary centripetal force.

When a body moves along a circular

path or a curve with a uniform circular
speed, the body is acted upon by an inward acceleration. This acceleration acts
towards the centre of a circular path or
curve and is called as radial or centripetal
acceleration which gives rise to the centripetal force. The centripetal force is an
essential condition of the circular motion.
Centripetal force (Fc) = mass of the body
(m) centripetal acceleration (ac)

where v = linear speed, w = angular

speed or, r = radius of circular path or
curve.

The centripetal force acting on a body

is an action and an equal and opposite
force called centrifugal force appears as a
reaction.

(b) Banking of Roads : At the highways

where vehicles run fast, the frictional
force is not a reliable source for providing the required centripetal force to the
vehicle. Hence, at such curved roads, a
safer course of action is to raise the
outer edge of the curved road above
the inner edge. It is known as banking
of roads. The banking of roads provides the required centripetal force.

A cyclist leans forward while going along

a curve. By doing so, the ground provides him the centripetal force which he
requires for turning. Hence, the cyclist
leans inwards from his vertical position.

In an atom, the required centripetal force

for an electron in its circular orbit is provided by the electrostatic force of attraction between the electron and nucleus.

The force of gravitation provides the

essential centripetal force when a satellite revolves around a planet or a planet
revolves around the sun.

Application of centripetal force :

When a bucket containing water is
whirled in a horizontal or vertical direction water does not fall down on the
ground.

or
.co
m

Out of the three laws of motions, the

second law is the real law because it includes remaining both the first law and the
third law.

In a circus, a motor cyclist is able to

perform the feat of driving the motor

Physics

[15]

The product of force acting on a body

and perpendicular distance of line of action
of the force from the axis of rotation is
called moment of force or torque.
Torque = Force Perpendicular distance
from axis rotation

(iii) Consider a ballet dancer is rotating

with her arms and legs stretched
outwards. When she folds her arms
and brings the stretched legs close to
the other leg, her angular speed
increases.
(iv) Due to the same reason, the angular
speed of the inner layer of the tornado
(whirlwind) is extremely high.
(v) All helicopters are provided with two
propellers. If there was one single
propeller, the helicopter would rotate
itself in an opposite direction in
accordance with the laws of
conservation of angular momentum.

ssc
ex

Applications of Torque :
Torque due to a force is maximum, the
distance from the axis of rotation is
maximum. We can open or close a door
easily by applying force near the edge of
the door i.e. at maximum distance from
the hinges. Hence, a handle or knob is
fitted near the free edge of the plank of the
door. A wrench with a long arm is required
to unscrew a nut fitted tightly to a bolt.
Longer the arm of the wrench, smaller is
the required force to give sufficient turning
effect.

or
.co
m

Torque (Moment of Force)

versa. It is because in doing so the

angular speed increases.

tut

ROTATIONAL MOTION

Angular Momentum

It is equal to the product of linear

momentum of a body and the perpendicular
distance from the axis of rotation. It follows
the principle of conservation. It means the
total angular moment of an isolated system
remains always constant.

The angular velocity of revolution of a

planet around the sun in an elliptical
orbit increases, when the planet comes
closer to the sun and vice-versa.

(i)

Applications of conservation of
Angular Momentum :

(ii) A circus acrobat performs feats

involving spin by bringing his arms
and legs closer to his body and vice[16]

General Science

FRICTION

When a body moves (slides or rolls) or

even tries to move over the surface of
another body a tangential force comes into
action between their surfaces in contact,
against their relative motion. This opposing
force is termed as the force of friction.
The force of friction depends upon the
mass of the body on a surface and
roughness of the surfaces in contact
between them and the magnitude of
friction, which increases with increase in
roughness and mass.

When a body is at rest on a surface, the

friction is called static friction which is a self
adjusting force. When the body is on the
verge to move (slide or roll), the friction is
called limiting friction but when the body
moves, it gives rise to dynamic friction. The
limitting friction is the maximum force of
friction and it is always more than static or
dynamic friction.

Advantages of Friction

When a person pushes the ground backward, the rough surface of the ground
exerts a forward force due to friction. It
makes possible a person to move on the
ground. Due to lack of sufficient friction on ice or wet soil, it is difficult to
walk.

ssc
ex

Two bodies stick together due to friction.

The working of the brakes of vehicles is

possible due to friction only.

The friction between the tyres of

vehicles and road makes the motion of
the vehicles possible.
The cleaning action of sand-paper occurs due to friction only.

In absence of friction, we would not be

able to hold a pen and if we could, the
pen would not write on paper.

The transfer of motion from one part of

a machine to the other part through
belts is possible by friction.

The working of nuts and bolts for holding parts of machinery together is based
on friction.

The knots in woven clothes are possible

due to friction.

Disadvantages of Friction

Since, the force of friction opposes the

relative motion between any two bodies in contact, hence, extra work is done
to overcome the force of friction. It involves extra loss of energy. About 20%
of the petrol used in an automobile is
used up to overcome the force of friction in the engine and in driving.

Generally, friction opposes motion.

However, in certain cases friction is
essential for motion. Without friction,
motion cannot be started, stopped or
transferred from one body to the other.
Thus, friction is a necessary evil.

or
.co
m

Friction is a non-conservative force

and hence, the mechanical energy
(potential and kinetic energy) is not
conserved. In fact, friction converts
mechanical energy partly into heat, light
(spark), sound, electricity, etc.

tut

Usually, smoothness decreases the force

of friction. However, when the surfaces in
contact are made too smooth by polishing,
the binding force of adhesion increases and
hence, the frictional force increases. This is
called cold welding.

Writing on the black board with a chalk

is possible due to friction.

The force of friction results in heating

the working parts of the machinery that
may damage the parts.

Friction causes wear and tear of the

parts of the machinery.

The force of friction can be reduced :

By polishing : polishing causes smoothness.

By lubricating : The lubricants, oils,

grease etc. fill up the irregularities of
the surfaces and hence, the surfaces
become smoother.

By using ball-bearings

The force of friction can be increased :

by applying sand on the slippery

ground.

by applying sand on the road covered

with snow.

by making depressions, projections, etc.

in the tyres during manufacturing.
Physics

[17]

or
.co
m

tity. And it never decreases with time.

For a moving particle it cannot be zero.

Order of the magnitude of the

force of friction is:

Distance covered magnitude of displacement.

Owing to least value of rolling friction

wheels are used in vehicles.

Speed is always a + VE quantity.

However, it can increase or decrease
with time.

When a particle returns to the starting

point its average velocity is zero but
average speed is not zero.

TRIVIA

Distance covered is always a + VE quan-

ssc
ex

When a particle goes from one point

to another, the actual length of the
path is called distance covered. The
average speed is defined as the distance covered per unit time. In the
above case, the straight line distance
between the initial and final positions
is called magnitude of displacement.
The average velocity is defined as magnitude of displacement per unit time.

[18]

For uniform motion distance covered =

magnitude of displacement. The motion is along a straight line and its direction cannot change.

tut

Rolling friction < sliding friction < limiting friction.

General Science

If a body covers first half distance with

speed v1, and the second half distance
with speed v 2, then average speed
= Harmonic mean.

or
.co
m

WORK, ENERGY
AND POWER

WORK

POWER

tut

The time rate of change of work is

power. When a body takes less time to do a
certain work, its power is said to be more
and vice-versa.

When a force is applied on a body and

a displacement is carried out in any
direction except in a direction
perpendicular to the direction of the force,
an amount of work is done by the force.
The amount of work done is equal to
the product of the force and the distance
travelled in the direction of the applied
force i.e.

ssc
ex

or,

Unit of work is Joules(s) 1 joule =

Newton 1 metre.
Work done by a force may be zero,
positive or negative depending upon the
direction of the applied force and
displacement.
When a coolie is carrying some load on
his head and is waiting for the arrival of
the train, he is not doing any work. No
mechanical work is done by a teacher
teaching a class. When a body falls freely
under the action of gravity, work done by
gravity on the body is positive. When a
body is pushed or pulled by a force, work
done is positive. The force of friction acts
against the motion, hence the work done
by the frictional force is negative.

Its unit is watt (w). One kilowatt (1 kw)

is equal to 1000 watt. One horse power
(h.p.) is equal to 746 watt. Power of an
agent measures how fast it can do the
work. The area under the force versus
distance graph is numerically equal to the
work done by the agent.

Work = Force Distance

The area under power-time graph gives

the work done while the slope of work
versus time graph gives the power.

Physics

[19]

or,

or
.co
m

Work = power time = area under w-t

graph

moving with same K.E. and same retarding

force is applied on each, both the bodies
will stop after travelling the same distance.
K.E. of a body is also given as :

or,

= slope of w-t

graph.

ENERGY

Kinetic Energy (K.E.)

Hence, when a light and a heavy body

are moving with the same linear momentum,
the light body will have more K.E.
Every moving system is associated with
a definite amount of K.E. e.g. a moving
vehicle, wind, water flow, etc.

The ability of a body to do work is called

energy. When a body can do more work, it
is said to have more energy and vice versa.
Energy is different from power. Energy refers
to the total amount of work a body can do
and power determines the rate of doing
work. Both the energy of a body and work
done by the body are equivalent and are
measured in Joule (J).

tut

or,

ssc
ex

It is the energy possessed by the body

by virtue of its motion. The kinetic energy
of a body is given as

Where m = mass of the body and v =

velocity of the body. Thus, K.E. of a body is
equal to half the product of mass of the
body and square of velocity of the body.
The change in K.E. of a body measures the
work done by the body.

Potential Energy (P.E.)

The energy possessed by a body by virtue

of its position or configuration is known as
its potential energy. The mechanical P.E. is
of two types viz., gravitational P.E. and
elastic P.E. The gravitational P.E. of a body
at a certain height is due to gravity whereas
the elastic P.E. is due to its property of
elasticity.
Gravitation P.E. = mass acceleration
due to gravity height = mgh
At the surface of the earth, h = 0,
P.E. = 0
Different Forms of Energy

(i)

Heat : It is the energy possessed by a

body by virtue of random motion of
the molecules or particles of the body.

(ii)

Where u and v are initial and final

velocities of the body of mass m.

Internal Energy : It is the energy of a

body due to the molecular
configuration and molecular motion.

When a heavy and a tight body are

(iii) Electrical Energy : This energy arises

or,

[20]

General Science

(v)

Nuclear Energy : It is the energy

released during the nuclear reaction
due to conversion of mass into energy.

Mass-Energy Equivalence

Mass and energy are equivalent to each

other and can be interconverted according
or

Sources of Energy

The sources of energy are immense and

they are divided into two groups viz.
(i) Renewable Source : These sources
of energy are inexhaustible and are being
continuously supplied by nature e.g. wind,
flowing water, the sun, ocean tides, biogas,
plants and vegetable waste, etc.
(ii) Non-renewable Source : They are
exhaustible and have been formed in nature
long ago e.g. coal, petroleum, natural gas,
fissionable materials like uranium.

to Einsteins equation
m = E/c2.

or
.co
m

(iv) Chemical Energy : It is the energy

possessed by the body by virtue of
chemical bonding of its atoms.

height, its P.E. begins to decrease and this

decrease in P.E. appears as an increase in
its K.E. When the body arives at the ground,
its P.E. becomes zero and this appears as
K.E.

tut

due to work done in moving free

charge carriers in a particular direction
through a conductor.

Where E = energy, m = mass and, c =

speed of light in vacuum = 3 108 m/s.
If mass = 1 kg, the energy released is

ssc
ex

E = 1 kg (3 108)2 m/s2 = 9 1016

Joule

This law unifies the two laws viz the

law of conservation of mass and the law of
conservation of energy. Most of the energy
in the universe i.e. energy in stars is
obtained due to conversion of mass into
energy.

Wind Energy

Air in motion is wind which has kinetic

energy called wind energy.
Causes of Wind

The total sum of all kinds of energy of an

isolated system remains constant at all times.
Energy neither can be created nor be destroyed
but can be transformed from one form to
another. The amount of energy appearing in
one form is exactly equal to the energy
disappearing in some other form always.

The equatorial region receiving

perpendicular sun-rays has warmer air
than that in the polar region where sunrays are slanting. The warm air rises up in
the equatorial region. The air from polar
regions rushes towards the equatorial
region to fill the gap. This causes the air to
move. Moreover, local weather conditions
also contribute to the movement of air. If
the speed of air is small, then the wind is
known as breeze. On the other hand, if the
speed of air is very large, then the wind is
known as storm or tornado.

When a body is at rest at a certain

height above the surface of the earth, it
only has an amount of potential energy.
As soon as the body is released from that

Uses of Wind Energy

(i) Sail Boats : A boat can be rowed
with oars using muscular energy which is
a tiresome job for a longer distance. Hence,

Principle of Conservation of Energy

Physics

[21]

or
.co
m

Tidal power plant is made near narrow

bays. During tides, the gates of the dam
are opened. The rising water is allowed to
fall on the turbine of the generator which
produces electricity and the K.E. of the
water is converted into electrical energy.
During low tides, gates of the dam are
closed and hence the water level behind
the dam rises. This raised water has high
potential energy. Again the gates are
opened and the water falls on the turbine.
Thus, the electricity is produced
continuously.

To move the boat in any desired

direction, two sails at right angles to each
other are attached to the same pole fixed
on the pole . A steering device known as
rudder is used to turn these two sails
through any angle. One of the sails is used
to direct the wind and the other sail collects
this wind. The kinetic energy of the wind
collected by the second sail (propeller)
moves the boat in th desired direction.

gravitational force of attraction exerted by

moon and to some extent by the sun on the
water of the ocean. At the time of new and
full moon, when the sun and the moon are in
a straight line, tides are very high. When the
sun and the moon are at right angle from the
earth, tides are low. The K.E. of the water
during tides is used to produce electricity.

tut

a sail is used by utilizing K.E. of the wind

to move the boat. A sail is a large sheet of
thick cloth spread over a boat in such a
way that maximum wind falls on it. The
sail boat moves due to wind. The speed
and direction of motion of the soil boat
depend mainly upon the wind.

(ii) Wind Mill : A device used to convert

wind energy into the mechanical energy of
the machine is called wind mill.

ssc
ex

Wind energy is pollution free and

economical. However, it is limited to certain
places where wind is in plenty and blows
most of the time. In India, there are some
high wind energy regions like Islands of
Bay of Bengal and Arabian Sea, coastal
parts of Gujarat and Tamil Nadu, some
parts of Rajasthan, Karnataka and Western
Parts of Madhya Pradesh. Government of
India has proposed to install a number of
projects to tap the wind energy. In Gujarat,
two wind power energy stations are
operating. One is at Lamba in Porbandar
district. This power station is producing
about 2000 million units of power every
year. The second power station operating
with wind energy is in Okha.
Tidal Energy

The alternate rise and fall of water of the

ocean twice in nearly 24 hours is known as a
tide. The tides are produced due to the
[22]

General Science

France and Canada are the leading

countries which harness the tidal energy.
In India, three sites viz. Gulf of Kutch
(Gujarat), Gulf of Cambay (Gujarat) and
Sunderbans (West Bengal) have been
identified to construct tidal power plants.
Ocean Thermal Energy

It is heat energy obtained due to the

temperature difference between the
different layers of water in the ocean. The
surface temperature of the ocean is much
more than the inner deep ocean. Due to
this temperature difference, heat energy
can be drawn to produce electricity.
The vegetation and biomass found at
the sea bed can be used to produce heat.
Different
oceans
have
different
concentrations of salt. Hence, electricity
can be produced at the site where different
oceans meet.

Biogas

Mixing tank is connected to the digester

with the help of the inlet pipe. The overflow
tank used to collect the used slurry is also
connected by a pipe. The biogas collected
in the floating tank is taken out with a pipe
having a gas valve.

Biogas is a mixture of gases like methane

(65%), CO2, H2 & H2S formed when the
animal dung mixed with water is allowed
to ferment in the absence of air (Oxygen)
and it is produced in a biogas plant. Biogas
is a very good fuel to produce heat.

or
.co
m

The inner part of the earth is very hot

and hence, hot underground water comes
automatically out of the earths surface in
certain regions in the form of fountains
known as hot water springs or geysers.
The steam of these springs under high
pressure can be used to rotate the turbines
of the generator to produce electricity.

Floating Gas Holder Type Biogas

Plant : It consists of a well shaped tank
inside the ground called digester. Digester
is divided into two chambers with a
partition wall. A drum shaped gas holder
made of steel in the inverted position over
the mouth of the digester acts as a storage
tank for biogas. This tank moves up and
down over the slurry in the digester tank
and hence this gas plant is called floating
gas holder type. The motion of the drum
is controlled by a pipe.

tut

Geothermal Energy

ssc
ex

The arrangement of producing biogas

from animals dung, human excreta and
industrial and domestic wastes is known
as biogas plant. There are two types of
biogas plants which have been used in our
country. These are :
(i) Fixed-dome type biogas plant.

(ii) Floating gas holder type biogas plant.

Fixed-Dome Type Biogas Plant : It

consists of a well like underground tank
made of bricks and cement. This tank is
called digester and has inlet and outlet
valves. The roof the tank is dome shaped.
There is a gas outlet pipe at the top of the
dome. The dome of the digester acts as a
storage tank of biogas. Thus, the gas-holder
(i.e., dome) is fixed. There is a mixing tank
made above the ground level. On the other
side of the digester, a rectangular tank
called outlet chamber is constructed with
bricks and cement. This outlet chamber is
connected to the overflow tank which
collects the used slurry.

MACHINE
Machine is a device to overcome load
or resistance applied to it at some point by
a relatively small effort applied to it at
some convenient point.
Lifting machine : It is a device to lift
heavy load by applying comparatively
smaller force like lever, wheel and axle,
inclined plane, etc.
Physics

[23]

Load : The resistance (force) to be

overcome by a machine is called load.

with the help

conservation.

the

laws

Violation of the laws of conservation

indicates that the event cannot take place.

Work done depends on the frame of

reference.

Work done is path independent only in

a conservative field.

Stopping distance of a body

When the water is flowing through a

pipe with speed v, then its power is
proportional to v3.

Mechanical Advatnage (M.A.):

tut

Velocity Ratio (V.R) or Ideal Mechanical

Advantage (IMA)

or
.co
m

Effort : The force applied to a machine

to overcome load (resistance) is called
effort.

Efficiency of a machine

If kinetic energy of body is doubled, the

its momentum becomes
times.

Efficiency is always less than one or

less than 100%. Ony for ideal machines,
the efficiency is one or 100%.

If an elastic collision of two equal

masses, their kinetic energies are
exchanged.

V.R. or I.M.A. for some simple

machines

If a light and a heavy body have equal

momenta, then lighter body has greater
kinetic energy.

Potential energy of a system increases when

a conservative forces does work on it.

If a body of mass m moving with

velocity v, collides elastically with a
rigid ball, then the change in the
momentum of the body is 2 mv.

Work done by a centripetal force is

always zero.

When the momentum of a body

increase by a factor n, then its kinetic
energy is increased by factor n2.

If the speed of a vehicle is made n times,

then its stopping distance becomes n2 times.

ssc
ex

(i) Lever : I.M.A.

(ii) Whel nd Ale :

Conservation laws can be used to

describe the behaviour of a mechanical
system even when the exact nature of
the forces involved is not known.

CONSERVATION

Although the exact nature of the nuclear

forces is not known, yet we can solve
problems regarding the nuclear forces

[24]

General Science

NEWTONS LAW OF
GRAVITATION

ssc
ex

The gravitational force of attraction

between any two bodies in the universe is
directly proportional to the product of their
masses and inversely proportional to the
square of distance between them.
Let two bodies of masses m1 and m2
respectively having a separation of r
between them.

Then from the Newtons law of

gravitation, we get the gravitational force
between them

Where G is the universal gravitational

constant. G = 6.67 1011 Nm2kg2. The
value of G remains constant anywhere in
the universe.
The Newtons law of gravitation
explains the rotation of the moon around
the earth or earth around the sun. It
correctly predicts the solar and lunar

tut

eclipses, and the orbits and time period of

the modern artificial satellites. The cause
behind the tides in the oceans is mainly the
gravitational force of attraction between
the moon and ocean water.

GRAVITY

The force of attraction between any two

bodies in the universe is called gravitation.
The force of gravitation is the weakest force
in the nature. However, it is the most
important force in the universe because it
plays an important role in planetary motion,
the birth of a star, etc.

or
.co
m

Gravitation

It is the force of attraction exerted by

the earth towards its centre on a body
lying on or near the surface of the earth. It
is called earths gravitational pull. Thus,
the gravity is a special case of gravitation.
The force of gravity acting on a body is
the measure of weight of the body. The
force of gravity produces an acceleration
in a body and it is known as acceleration
due to gravity. It is denoted by g. If a body
is of mass m, then its weight at the surface
of the earth is mg.
Weight = mass acceleration due to
gravity.

The acceleration due to gravity

decreases above and below the earths
surface. Hence, the weight of a body
decreases with increase in height above
the earths surface or increase in depth
below the earths surface. The value of g
is maximum at the poles and minimum at
the equator of the earth. At the centre of
the earth g is zero.
Physics

[25]

SATELLITE

or
.co
m

It is also known as a geosynchronous

satellite.
(ii) Polar Satellite : It revolves around
the earth in a polar orbit which is at 90 to
the equatorial plane. It passes over both
the north and south poles of the earth once
per orbit. Hence, every location on earth
lies with the observation of polar satellite
twice each day. It is also known as the sun
synchrononous satellite.
In order to monitor 100% earths
surface, three geostationary satellites are
required while a single polar satellite can
do the same job.

The body revolving around a planet

continuously in an orbit is called a satellite.
Moon is a natural satellite of the earth.
Since 1957, many man made satellites have
been put in different orbitals around the
earth. They are called Artificial Satellites.

rotates around the earth from west to east,

similar to that of the earth. Its speed is 3.1
kms/s. Its orbit is coplaner to the equatorial
plane of the earth.

tut

Acceleration due to gravity is

independent of mass, shape, size, etc. of a
falling body i.e. a light and a heavy freely
falling body will attain an equal
acceleration which is equal to the
acceleration due to gravity (g). The average
value of g at the surface of the earth is 9.8
m/s2. Heavier a planet or satellite, higher
is its g. The value of g at the surface of
the moon is 1/6th of the value at the earths
surface. The value of acceleration due to
gravity is minimum at planet Mercury and
maximum at planet Jupiter.

ssc
ex

A satellite revolves around the planet

in an orbit under the effect of the centripetal
force provided by the gravitational force of
attraction between the satellite and the
planet. The minimum velocity with which
a satellite is put into its orbital is called
orbit velocity which is given as

Where g = acceleration due to gravity,

R = radius of the earth and h = height of
the satellite above the earths surface. If h
<< R, then
= 8 km/s.

(i) Geostationary Satellite : It appears

always at a fixed location above the earth
in its orbit. Its time period of revolution
around the earth is 24hrs and its height is
36000 km above the equator of the earth. It
[26]

General Science

ESCAPE VELOCITY

The minimum velocity required to

throw a body so that it becomes free from
the earths gravitational pull is called escape
velocity. It is given as
= 11.2 km/
s for the earth where g is acceleration due
to gravity and R, the radius of the earth.

EFFECT OF GRAVITY ON
WEIGHT OF A BODY
When a body falls freely, its weight
becomes zero. This situation is known as
weightlessness. In a spacecraft or satellite,
the effective weight of a body is zero because
the gravitational force is balanced by the
centrifugal force.
When a lift is at rest or is moving up/
down with a uniform velocity, the weight
of a body inside it remains unchanged.
But, when the lift accelerates upwards,

(i)

The First Law : Every planet revolves

around the sun in an elliptical orbit.

(ii) The Second Law : The average radius

of the elliptical orbit of the planet
sweeps out equal areas in equal
intervals of time.

or
.co
m

KEPLERS LAWS OF PLANETARY

MOTION

Variation of g inside the earth is linear.

That is, it increase in direct proportion to
the distance from the centre of the earth.

Decrease in acceleration due to gravity

at a depth d is given by : gd/R, where R
= radius of the earth.

Orbital velocity very near the surface of

the earth is 7.92 km/s.

Greater the height of the satellite smaller

is the orbital velocity.

tut

the weight of a body in it increases while

downwards the weight of a body decreases.

Time period of the satellite very near

the surface of the earth is about 84.6
minutes.

No energy is dissipated in keeping the

satellite in orbit round a planet.

TRIVIA

If the total energy (KE + PE) of a satellite is negative, its orbit is either circular
or elliptical. In this case PE > KE.

If the total energy of the satellite is zero,

it escapes away along a parabolic path.
In this case PE = KE.

When the total energy of a satellite is

positive, it escapes along a hyperbolic
path. In this case KE > PE.

The escape velocity from the surface of

the earth is 11.2 km/s.

If a body falls freely from infinite height,

then it reaches the surface of the earth
with velocity 11.2 km/s.

Kinetic energy of escape for a satellite =

2 kinetic energy of orbital motion.

A body in gravitational field has maximum binding energy when it is at rest.

A hydrogen baloon released at a height

on the moon will fall with an accleration
nearly 1.6 m/s2.

Planets revolves around the sun in elliptical orbits with the sun at one of the
focii.

ssc
ex

(iii) The Third Law : The square of the time

period of revolution of a planet is
directly proportional to the cube of
average radius of its elliptical orbit i.e.
T2 R3.

The gravitational force is much smaller

than the electrical force because the
value of G is very small.
Gravitation is a conservative force.

Gravitation is a central force.

G is a scalar quantity.

Work done in moving unit mass from

infinity to any point in space is called
gravitational potential at that point.

Gravitational potential is a scalar quantity.

Gravitational potential due to the earth

at its surface is given by : Ve = GMe|Re
where Me = mass of the earth and Re =
radius of the earth.

Unit of gravitational potential is J/kg.

The gravitational intensity inside a hollow spherical shell is zero.

Physics

[27]

or
.co
m

PROPERTIES OF
MATTER

tut

(ii) Amorphous or Glassy Solids : They

have irregular arrangement of particles.
Hence, they do not have a definite
external geometrical shape and sharp
melting point. They are isotropic i.e. their
physical properties have the same value
in all directions e.g glass, cement,
rubber, paraffin, plastic, etc.

Matter is broadly divided into three

categories, viz. Solid, Liquid and Gas. Due
to the strongest intermolecular force of
attraction in solids, they are tough and
have a definite shape and size. This force is
relatively weak in liquids and so the shape
is easily changed but liquids have a definite
volume. In gases, the intermolecular force
of attraction is minimum and hence, they
do not have a definite shape, size and
volume.

ssc
ex

There is a fourth state of matter called

plasma state in which matter exists in
ionised state. Plasma state is common in
stars.

SOLIDS

In solids the constituent particles (atoms,

molecules or ions) are held strongly at the
position of minimum potential energy. Solids
are of two categories :

(i) Crystalline Solids : They have a regular

pattern of constituent particles in three
dimensional space. Hence, they have a
definite external geometrical shape and
a sharp melting point. They are an
isotropic i.e. their physical properties
like conductivity (thermal and
electrical), refractive index, mechanical
strength etc. have different values in
different directions e.g. rice, sugar,
quartz, diamond, rocksalt, most of
metals & their compounds, etc.
[28]

General Science

LIQUIDS

Pressure due to a liquid column depends

upon its density and height
Where h = height of liquid column and
d = density of liquid. If equal amounts of a
liquid are kept in two containers one with
broad base and another with a narrow
base, the height of liquid column will be
more in the container with the narrow
base and hence, the liquid pressure exerted
will be more on the narrow base than that
on the broad base.
Pascals Law : If the effect of gravity is
neglected the pressure at every point of a
liquid in equilibrium of rest is the same. It
means, in a liquid content, the effect of
pressure is equally trasmitted through out
the liquid system.
Hydraulic lift, Hydraulic press or Brahma
press, etc. work on the Pascals law.
Pressure is equal to the force acting
per unit area i.e. pressure

or
.co
m

the weight iceberg containing an iron

pin but the weight of water displaced
by the iron pin is less than the weight of
the pin.

Initially, a balloon filled with helium gas

rises in the air because the weight of the
air displaced by the balloon is greater
than the weight of the balloon. As it goes
up, the weight of air displaced decreases
due to decrease in the density of air and
hence, the balloon halts at a height
where the weight of air displaced by the
balloon becomes equal to the weight of
the balloon.

Buoyancy : Whenever a body is

immersed in a fluid, the displaced fluid has
a tendency to occupy the original position.
Hence, an upward force is experienced by
the body. This upward force acting on the
body inside a fluid is called bouyancy or
buoyant force or upthrust.

tut

Let a liquid system having two open

surfaces one with a narrow cross sectional
area and other with a broad cross section
and provided with pistons. Since pressure
remains the same in every section of the
liquid system, hence, by putting a small
load on the piston of small cross section a
heavy load placed at the piston of the broad
cross-section can be uplifted.

Archimedes Principle : When a body

is partially or completely immersed in a
fluid, it loses some of its weight which is
equal to the weight of the fluid displaced
by the body.

Air content above the earth exerts force

due to its weight on the ground. This force
on the ground gives rise to the atmospheric
pressure. At the sea level the value of
atmospheric pressure is one atmosphere.

Law of Floatation : A body will float in

a liquid, if weight of liquid displaced by the
immersed part of the body is at least equal
to or greater than the weight of the body.

1 atmosphere = 760 mm of Hg = 76 cm
of Hg = 1.013 105 N/m2

Applications are discussed as below :

Barometer is a device that measures

pressure. Mercury barometer is the most
common type.

An iceberg having an iron pin floats on

the water surface but the pin sinks in
water after melting the iceberg. This is
because the density of ice is less than
that of water and the weight of water
displaced by the iceberg is more than

A wooden block or a big ship can float

but an iron pin sinks in water because
the weight of water displaced by a
wooden block or a ship is either equal
to or more than their respective weights
whereas the weight of water displaced
by the pin is less than the weight of the
pin. Due to the same reason, a metallic
bowl can float on the water surface.

ssc
ex

ATMOSPHERIC PRESSURE

= 1.013 105 pascal = 760 torr.

Pressure : Pressure is equal to the

normal force acting per unit area. If the
handles of the bags and suitcases are broad,
the pressure on the hand carrying them
will be small.
Railway tracks are laid on large sized
wooden, iron or cement sleepers so that
the thrust due to weight of train is spread
over a large area. This reduces the pressure
on the ground which would prevent the
yielding of ground. Pins and nails are
pointed so that on pressing on a surface
they exert high pressure on the surface
Physics

[29]

ELASTICITY

ssc
ex

The ability of a body to regain its original

configuration after removal of an applied
deforming force is called elasticity and the
body is termed elastic. Quartz and
phospher bronze are nearly perfectly elastic
bodies. Steel is more elastic than rubber.
Most of the metals are elastic.
When a body does not regain its original
configuration at all on the removal of the
deforming force, it is called a plastic body.
e.g. plastic paraffin, putty, etc.

When a deforming force is applied on

an elastic body, its configuration changes
and after the removal of the force the body
regains the original form. The force applied
per unit area is called stress and the ratio
of the change in configuration to the
original configuration is called strain.

Hookes Law : Within the elastic limit,

the stress developed is directly proportional
to the strain produced in a body i.e. stress a
strain or stress = E strain or
Where E is a constant for a given body

[30]

General Science

or
.co
m

Ductile Materials : These materials

show a large plastic range beyond the
elastic limit.They are used in making
springs and sheets e.g. coppers, iron, silver,
aluminium, etc.
Brittle Materials : These materials
show a very small plastic range beyond
elastic limit e.g. glass, cast iron, etc.
Elastomers : These materials have no
plastic range. In such materials even a
small stress can produce a large strain e.g.
rubber, the elastic tissue of aorta in the
human blood circulatory system, etc.

Vander Waal Force of Attraction : It is

the minimum force of attraction between
any two neutral particles (atoms or
molecules). It may be of two types viz.
cohesive force (between similar molecules)
and adhesive force (between dissimilar
molecules).

and known as the co-efficient of elasticity

or modulus of elasticity. The modulus of
elasticity is a measure of elasticity of a
body.

tut

and hence, easily penetrate the surface.

The pointed end has least the surface area
and it provides greater pressure on applying
a normal force because pressure is equal to
force devided by area. Due to the same
reason, it is painful to walk bare footed on
a road covered with edgy pebbles.

Safety factor

When a material is used in a certain

construction, the working stress is kept
much lower than that of breaking stress so
that the safety factor may have a large
value.
The metallic parts of the machinery are
never subjected to a stress beyond the elastic
limit, otherwise they will get permanently
deformed.
The bridges are designed in such a way
that they do not bend much or break under
the load of heavy traffic, force of strongly
blowing wind and its own weight. In order
to minimise the depression in the beam of
given length and material the depth of the
beam is kept large as compared to its breadth.
However, too large a depth of the beam may
cause bending, called buckling. Hence, a
compromise between breadth and depth of
a beam is made by using an I shaped girder
with a large load bearing surface.

If a material is subjected to repeated

strains, it losses its elasticity over a long
period of time. After a long use, the bridges
are declared unsafe.
The modulus of elasticity has the same
units and dimensional formula as that
of strees or pressure.

The material is more elastic if its value

of modulus of elasticity is large.

Youngs modulus of elasticity-Y and

modulus of rigidity h exist only for
solids as liquids and gases cannot be
deformed along one dimension only and
also cannot undergo shear strain.
However, the bulk modulus of elasticity
K exists for all the three states of mater;
viz; solid, liquid and gas.

ssc
ex

The solids are more elastic and gases are

least elastic. It is so because for the given
stress applied the gases are more
compressible than that of solids.

Youngs modulus of the material of a

wire is numerically equal to the stress
which will double the length of a wire.

Reciprocal of bulk modulus is called

compressibility.

Hookes law is obeyed only for small

values of strain (say of the order of 0.01).

Higher values of the elasticity (modulus)

means greater force is required for
producing a given change.

The materials which break as soon as

the stress goes beyond the elastic limit
are called brittle.

The materials which do not break well

beyond the elastic limit are called ductile.

The deformation beyond elastic limit is

called plasticity

or
.co
m

The material used to construct a spring

should be of higher elasticity. Hence, steel
having higher elasticity is used to construct a
spring. Rubber is of lower eleasticity and
hence, it cannot be used to construct a spring.

tut

A hollow shaft is found to be stronger

than a solid shaft made of the same equal
material.

Rubber sustains elasticity even when

stretched several times its length.
However it is not ductile. It breaks down
as soon as the elastic limit is crossed.

Breaking stress does not depend on the

length or area of cross section of the
wire. However it depends on the
material of the wire.

Breaking force depends on the area of

cross section. Breaking stress of a wire
is called tensile strength.

Elastic after effect is temporary absence

of the elastic properties.

Temporary loss of elastic properties due

to continuous use for a long time is called
elastic fatigue.

Thermal stress in a rod is independent

of the area of cross section or length of
the rod.

When a body is sheared, two mutually

perpendicular strains are produced.
They are called longitudinal strain and
compressional strain. Both are equal in
magnitude.

TRIVIA

Youngs modulus is defined only for the

solids.

Bulk modulus is defined for all types of

materials : solids, liquids and gases.

Physics

[31]

The pressure is perpendicular to the

surface of the fluid.

The upthrust on a body immersed in a

liquid does not depend on the mass,
density or shape of the body. It only
depends on the volume of the body.

The weight of the plastic bag full of air

is same as that of the empty bag because
the upthrust is equal to the weight of
air enclosed.
The wooden rod cannot float vertically
in a pond of water because centre of
gravity lies above the metacentre.
The cross-section of the water stream
from a tap decreases as it goes down in
accordance with the equation of
continunity.

We cannot sip a drink with a straw on

the moon, because there is no
atmosphere on the moon.

The line joining the centre of gravity and

centre of buoyance is called central line.

The point where the vertical line through

centre of buoyancy intersects the central
line is called metacentre.

ssc
ex

The floating body is in stable equilibrium

when the metacentre is above the centre
of gravity. (Centre of gravity is below
the centre of buoyancy)

If a body just floats in a liquid (density

of the body is equal to the density of
liquid) then the body sinks if it is pushed
downwards.

The hydrometer can be used to measure

density of the liquid or fluid.

When a gale blows over a roof, the force

on the roof is upwards.

Sudden fall in atmospheric pressure

predicts possibility of a storm.

If two bodies have equal upthrust in a

liquid, both have the same volume.

If one floats on ones back on the surface

of water, the apparent weight is zero.

or
.co
m

Quartz is the best available example of

perfectly elastic material.

tut

The floating body is in unstable

equilibrium when the metacentre lies
below the centre of gravity. (Centre of
gravity is above the centre of boyancy).

The floating body is in the neutral

equilibrium when centre of gravity
coincides with the metacentre. (Centre
of gravity coincides with the centre of
buoyancy).

[32]

General Science

If a beaker is filled with liquid of density

p upto a height h, then the mean
pressure on the walls of the beaker is
hp g/2.

Stress and pressure have the same units

and dimensions, but the pressure is
always normal to the surface but the
stress may be parallel or perpendicular
to the surface.

Isothermal elasticity = pressure (p)

Adiabatic elasticity = Ratio of specific

heats pressure.

Normal stress is also called tensile stress

when the length of the body tends to
increase.

Normal stess is called compressive stress

when length of the body tends to
decrease.

Tangential stress is also called shearing

stress.

When the deforming force is inclined to

the surface, both the tangential as well
as normal stress are produced.

or
.co
m

Diamond and carborundum are the

nearest approach to the rigid body.

A liquid does not wet the containing

vessel if its angle of contact is obtuse.

Elasticity is meaningless for the rigid

bodies. That is, the elastically is the
property of the non rigid bodies.

Compressibility

In case of liquids which do not wet the

walls of the containing vessel, the force
of adhesion is less than
times the
force of cohesion.

Breaking stress is independent of the

length of the wire.

The height of the liquid column in a

capillary tube on the moon is six times
that on the earth.

Breaking stress depends on the material

of the wire.

Soldering of two metals is possible

because of cohesion.

Breaking load depends on the area of

cross-section of the wire.

Bulk modulus was first defined by Max

well.

When the liquid drops merge into each

other to form a larger drop, energy is
released.

In the stretched spring, tensile strain is

produced.

Breaking stress for a wire of unit

crosssection is called tensile strength.

tut

The liquid rises in a capillary tube, when

the angle of contact is acute.

Surface tension of molten cadmium

increase with the increase in
temperature.

If a beam of rectangular cross-section is

loaded its depression is inversely
proportional to the cube of thickness of
the beam.

The coefficient of viscosity of gases

increase with the rise in temperature but
that of liquids decreases with the
increase in temperature.

If a beam of a circular cross-section is

loaded, its depression is inversely
proportional to the cube of radius.

The streamlined or turbulent nature of

flow depends on the velocity of flow of
the liquid.

If we double the radius of a rope its

breaking stress becomes four times, but
breaking stress remains unchanged.

Reynold number is low for liquids of

higher viscosity.

When a beam is bent, both extensional

as well as compressional strain is
produced.

Bernoullis theorem is based on the

conservation of energy.

Bernoullis theorem is strictly applicable

to non viscous fluids.

Viscosity is due to the transport of

momentum.

Maximum possibility of streamlined

flow is for low density and high
viscosity fluids.

When there is no external force, the

shape of a liquid drop is determined by
the surface tension of the liquid.

ssc
ex

Soap helps in better cleaning of clothes

because it reduces the surface tension
of the liquid.

Physics

[33]

Above critical temperature a substance

is in gaseous state and below critical
temperature it can be in vapour state.

The branch of thermal physics that deals

with measurement of the amount of
water vapours present in the
atmosphere is called hygrometry.

Saturated and unsaturated air :

(i) The air is said to be saturated when the

maximum possible amount of water
vapours are present in it.

Dew point

It is the temperature at which the

amount of water vapour actually
present in a certain volume of the air is
sufficient to saturate that volume of air.
* At the dew point the actual vapour
pressure becomes the saturation vapour
pressure.

Relative humidity can also be defined

as:
Relative humidity =

* The pressure of the water vapours in

the saturated air is called saturation
vapour pressure.

or
.co
m

Gases cannot be liquified above the

critical temperature.

tut

ssc
ex

(ii) If the air contains vapours less than the

maximum possible amount possible in
the air, then it (air) is said to be
unsaturated.

The humidity refers to the presence of

water vapours in the atmosphere. It is
defined in the atmosphere. It is defined
in the following two ways.

Relative humidity is low when the air is

dry.

Relative humidity is high if the air is

moist.

Hygrometer :
It is the device to measure the amount
of water vapours in the air or the relative
humidity.

Saturation vapour pressure changes

with the increase in temperature.

At 0C, the saturation vapour pressure

is 4.6 mm of Hg. Therefore, water
vapours are always present around the
ice.

* Absolute humidity : It is the amount

of water vapour preseent in 1m3 of the
air.
* Relative humidity =

* The relative humidity is generally

expressed in percentage.

Relative humidity may also be defined

as :
Relative humidity =

[34]

General Science

* It increases with the increase in

temperature.

When the temperature of the

atmosphere is equal to the dew point,
the relative humidity is 100%.

Maximum value of relative humidity is

100%.

The saturation vapour pressure of water

at 100C is 760 mm of Hg at sea level.

As the temperature rises, the absolute

humidity may increase and the relative
humidity may remain constant or may
even decrease.
Let the saturation vapour pressure at
temperature tC is p. If the atmospheric
pressure is reduced to p, the water starts
boiling at tC.

At the same temperature one feels hotter

if the relative humidity is high.

If the air is absolutely dry, the dew point

is not observed.

The dew point does not change if the

temperature of the room is changed.

The relative humidity decreases with the

increase in temperature.

If water is sprinkled in the room, both

relative humidity as well as the dew
point increase.

Dew appears on the leaves of the trees,

etc. due to the condensation of saturated
vapours.

Small droplets of water formed due to the

condensation of water vapours near the
surface of the earth constitute mist or fog.

Mist or fog formed much high above the

surface of earth is called cloud.

Human beings feel comfortable when the

relative humidity is between 50% to 60%.

When the air is saturated with water

vapours, the relative humidity is 100%
and dew point is equal to the room
temperature.

ssc
ex

or
.co
m

The study of low temperature is called

cryogenics.

tut

When the relative humidity is 100%, the

reading of the dry and wet bulbs is
same.

Smaller the difference in the

temperature of dry and wet bulbs, larger
is the relative humidity.

Water vapours are always seen around

the ice, because the temperature around
it is less than the dew point.

Physics

[35]

or
.co
m

SURFACE TENSION

Some common examples of surface

tension :
The hairs of a shaving brush when taken
out of water are pressed together. Inside water, hairs spread out. On taking
out the brush from water, the water
film forms between the hairs while tending to make its surface area minimum
due to surface tension brings the hairs
closer to each other.

tut

ssc
ex

The molecules at the surface of a liquid

have a higher potential energy than those
of the inner molecules. P.E. = mgh where
m is mass of a molecule, g is acceleration
due to gravity and h is the height of the
molecule above the bottom of the liquid.
Due to maximum height the surface
molecules of the liquid have maximum P.E.
Hence, in order to have higher stability,
the liquid surface tries to minimize its P.E.
In doing so, it tends to contract to have
minimum surface area, number of
molecules and hence, minimum P.E. and
maximum stability. Consequently, the
liquid surface behaves as if convered with
a stretched membrane. This property of
the liquid by virtue of which the free surface
of the liquid has a tendency to contract so
that it can have minimum surface area is
called surface tension.

In soldering, addition of flux reduces

the S.T. of molten tin, hence, it spreads.

The liquid drop has a tendency to have

minimum surface area due to the surface tension of the liquid and hence, it
becomes spherical.

The surface tension of oil is less than

that of cold water hence an oil drop
spreads on cold water while the surface tension of oil is more than that of
hot water, hence oil drop remains as a
drop on hot water.

In order to spread more, the surface tension of lubricants and paints is kept low.
Bees like insects can float on water surface
because the weight of the insect is balanced by the force of surface tension of
water. Due to the same reason, a greased
iron needle can float on water surface.

Stormy waves at sea are calmed by

pouring oil on sea water because oil
has low surface tension.

The surface tension is measured as the

force acting per unit length at the liquid
surface.

Surface tension

The surface molecules of the liquid are

always under the effect of an inward force
due to force of cohesion between the surface
molecules and inner molecules. That
imparts surface tension. The surface tension
of a liquid decreases with rise in
temperature and becomes zero at the boiling
points.
[36]

General Science

The bits of camphor are seen dancing

on the surface of water. The bits of
camphor reduce the surface tension of
water where they are dipped. Due to
irregular shape of the camphor bits,
unequal forces of surface tension act on
them. Hence, they move erratically on
the surface of water.
It is better to wash clothes in hot soap
solution. Hot solution has lower surface tension. Hence, the solution spreads
over a larger area or clothes and cleaning action increases.

increase in surface tension of the liquid.

Examples of capillary action :

The tip of of the nib of a pen is split in

order to provide a capillary which helps
the ink to rise to the end of the nib and
enables it to write continuously.

When a chalk piece is dropped into

water, air bubbles come out. The pores
in the chalk containing air act as narrow capillaries. Hence, water enters
these pores due to capillary action and
air bubbles come out.

A blotting paper has fine pores that

act as capillaries. Hence, ink rises in
them leaving the paper dry.

or
.co
m

When a wire loop is dipped into a soap

solution and taken out, a soap film is formed
on the loop due to surface tension.

tut

Warm food taste better on our tongue

because the warm food on chewing
spreads more on the tongue due to
lower surface tension. Consequently,
more food content comes in contact
with the taste buds on the tongue.
Hence, warm food is tastier than the
same food when cold.

ssc
ex

Action of detergent or soap solution :

When detergents or soaps are dissolved
in water, the surface tension of water
decreases. Hence, a detergent/soap solution spreads more quickly over the
clothes. Consequently, more dirt come
in contact with the solution and cleansing action enhances. Further, hot
soution has lower surface tension than
a cold one which gives extra cleaning
ability to the detergent/soap solution.

The capillary action of narrow capillaries in the threads of a towel enables the
towel to soak water.

The wooden door swells in the rainy

season because of the capillary action
of moisture available in the air through
the pores in the wood.

Molten wax in candles or oil in lamps rises

through threads due to capillary action.

Clay soil has capillaries but sand does

not have capillaries. Hence, underground water rises in a clay soil while
sand remains relatively dry.

In order to preserve moisture in the

soil, ploughing of fields is essential.
Ploughing breaks the fine capillaries in
the soil. It prevents the rise of water
and reduces evaporation of water content in the soil.

The transport of water and minerals

from the soil to plants is favoured by
the capillary action in the conduction
tissues called Xylems in the plants.

CAPILLARITY

The phenomenon of natural rise or fall

of liquid column in a narrow tube is called
capillarity and the tube is known as the
capillary tube. The capillarity increases with

Physics

[37]

The phenomenon of viscosity plays an

important role in the circulation of blood
through arteries and veins of human
body.

At railway terminals, the liquids of high

viscosity are used as buffers.

Water flows faster than honey because

viscosity of water is lower than that of
honey hence, a small dragging force
appears during the flow of water.

ssc
ex

BERNOULLIS THEOREM

The total sum of energy of a fluid

during its flow remains constant. A fluid
can have potential energy, kinetic energy
and pressure energy during its flow. Its
potential energy depends upon height,
kinetic energy on velocity and pressure on
the pressure of the fluid.

or
.co
m

It is fluid friction that arises due to inter

molecular forces which are effective when
the different layers of the fluid are moving
with different velocities. It gives rises to a
backward dragging force between the fluid
layers moving with respect to each other.
Viscosity of a liquid decreases with increase
in temperature but viscosity of gases
increase, under similar conditions.

hence, its area of cross-section decreases. If

the mouth of the tube used to water plants
in the garden is pressed, the speed and
range of the water flow increases, because
on pressing the cross sectional area of the
mouth of the tube decreases. Due to similar
reason the velocity of water increases when
water flowing in a broader pipe enters a
narrow pipe.

tut

VISCOSITY

Applications of Bernollis Theorem :

The size of the needle of a syringe controls flow better than the thumb pressure exerted by a doctor while administering an injection. The velocity of flow
is controlled by the size of the needle
whereas the pressure is controlled by
thumb pressure. In order to keep total
sum of pressure energy and kinetic energy of the flow constant, velocity increases more in accordance with the
Bernoullis theorm.

Two rows of boats moving parallel to

each other and nearby, are pulled towards each other. The velocity of water between the two rows increases
which results in increase in K.E. of
water in between. Hence, pressure
and pressure energy of water on the
outerside of the rows increase. Consequently, the rows of boats are
pushed inwards because the total sum
of energy of water in between and

In an industry, the measurement of

viscosity and its variation with
temperature are useful in judging
whether a given lubricant oil is useful
for a machine or not.

Chemists use the knowledge of viscosity

to determine molecular mass and shape

of large organic molecules like proteins
and cellulose.

FLOW OF FLUID

The rate of flow of a fluid through a

tube is inversely proportional to the area of
cross section of the tube. It means narrower
the tube, higher will be the velocity of fluid
through it. Hence, deep water runs slow in
a river. Similarly, the jet of falling water
becomes narrow as it goes down because
the velocity of falling water increases and
[38]

General Science

The wings of the aeroplanes are designed such that it experiences an upward pressure and hence, an upward
force. It is based on Bernoullis theorem. The upper surface of the wing is
more curved than its lower surface and
its leading edge is thicker than its trailing edge. Hence, the velocity of air above
the wings becomes more than that below them i.e. kinetic energy of air above
the wings becomes greater than that of
air below the wings. Consequently, the
pressure energy and hence, pressure of
air below the wings become greater than
those of the air above the wings. It gives
an upwards push on the wings and
prevents the planes from falling down.
When a spinning ball is thrown, it deviates from its usual straight line path
and its path becomes curved. This effect is based on Bernoullis theorem
and is known as Magnus effect. When
a spinning ball is thrown, air moves
backward above and below the ball.
The speed of air below the ball becomes more because the spinning ball

ssc
ex

or
.co
m

The roofs of hut or tinned roofs are usually blown off without causing any harm
to the huts during cyclones or storms.
The wind blows speedly above the roof
during the storm whereas air inside the
hut remains at rest. It gives higher kinetic energy and small pressure energy
above the roof whereas below the roof
K.E. is small and pressure energy is high.
Due to high pressure and hence, higher
pressure below the roof, the roof experiences an upward force and is blown off
with stormy wind.

TRIVIA

Molecular forces donot obey the inverse

square law of distance.

throws lower air in a backward direction. Hence, kinetic energy of lower

air becomes more and consequently,
in order to have equal energy, the pressure energy of upper air gets to increase. It results in increase in pressure above the ball. This pressure provides a centripetal force acting at a
right angle to the linear velocity of the
ball. Consequently, the ball follows a
curved path.

tut

outside the rows have to be constant

in accordance with the Bernoullis
theorem.

The molecular forces are of electrical

origin.

Work done in forming a soap bubble of

raidus R is 8R2 , where = surface
tension.

Work done in breaking a drop of radius

R into n drops of equal size = 4 R2
(n1/3 1).
Same amount of energy is liberated in
combining n drops into a single drop.

Angle of contact increases with rise in

temperature. It decreases on addition
of soluble impurities.

Angle of contact is independent of the

angle of inclination of the walls.

The materials used for water proofing

increase the angle of contact as well as
surface tension.

Detergents decrease both the angle of

contact as well as surface tension.

Surfaces tension does not depend on

the area of the surface.

Viscosity of liquids decreases with the

rise in temperature.
Physics

[39]

Viscosity of gases increases with the

rise in temperature.

The rate of flow of liquid in a tube of

radius r length l whose ends are maintained at a pressure difference p is :

or
.co
m

above the bottom or at the depth h

below the surface of the liquid.

The range is maximum for h = H/2. It

is given by

Interatomic or intermolecular forces are

zero when the separation between them
is infinite.

cosity where R = 8 l/r4 is called fluid

resitance.

Viscosity is independent of pressure.

When a liquid is in equilibrium, the

force/forces acting on its surface are
perpendicular everywhere.

tut

. Here = coefficient of vis-

At a certain distance r = r0, the interatomic or inter molecular force is zero.

The value of r0 is different for the different atoms and molecules.

In a liquid the pressure is same at the

same horizontal level.

For r > r0, the interatomic/ intermolecular forces are attractive.

The pressure at any point in the liquid

depends on depth (h) below the surface, density of liquid and acceleration
due to gravity.

For r < r0, the interatomic/intermolecular forces are repulsive.

At r = r0, the interatomic/intermolecular potential energy is minimum and

negative. It is the equilibrium position of
the atoms/molecules.

Bernoullis equation is in accordance

with the law of conservation of energy.

It assumes that in the flowing liquid,

every particle going across the crosssection possesses the same velocity.

Both the interatmoic as well as intermolecular force vary inversely as the

sixth power of distance (F 1/r6).

Differences between interatomic and

inter molecular forces :

(i)

Interatomic forces depend only on

the interatomic separation but the inter molecular force depends on the
intermolecular separation as well as
the orientation of the molecules.

If a vessel contains liquids upto a

height H and it has a hole in the side
at a height h, then the velocity of
. The time taken by
efflux is
the liquid to reach the ground level is
. Horizontal range of the liquid R = 2[h(H h) 1/2. The range is
the same for the hole at a height h

(ii)

Interatomic force are 50 to 100 times

larger than the intermolecular forces.

Bernoullis theorem doesnt take the

viscosity into account. When the fluid
flows along a covered path the energy of centripetal force must also be
taken into account.

ssc
ex

It is independent of the shape of the containing vessel, or total mass of the liquid.

[40]

General Science

(iii) Value of r0 for atoms is less than that

for molecules.
(iv) The intermolecular forces may extend
beyond their immediate neighbours.
This is not true for the interatomic forces.

or
.co
m

SPACE EXPLORATION

Characteristics of the Orbit of the

Satellite:
(a) Apogee : The farthest point on the
orbit of a satellite from the surface of the
earth is known as apogee.

Space exploration is the study of

collecting and analysing the information
and data about the various heavenly or
celestial bodies in the outer space.

an artificial satellite around the earth is

known as the orbit of the satellite.

tut

Space is a vast and endless area or

region outside the earths atmosphere
where the stars, planets and other celestial
bodies exist.

ssc
ex

With the advancement in technology, a

complete branch of science known as Space
Science has been developed to explore the
outer space. At present, the space
exploration is done by using artificial and
space probes.
A small body revolving around a planet
in an orbit is known as a satellite.

TYPES OF SATELLITES
Satellites are of two types :

(i) Natural Satellite : A celestial body

revolving around a planet is known as the
natural satellite. For example, the moon is
the natural satellite of the earth.

All planets except Mercury and Venus

have natural satellites.

(ii) Artificial Satellite : A man made

satellite that revolves around the earth is
known as an artificial satellite.

ORBIT OF SATELLITE

The closed elliptical path followed by

(b) Perigee : The nearest point on the

orbit of the satellite from the surface of the
earth is known as perigee.
(c) Inclination : The angle between the
plane of the equator of the earth and the
plane of the orbit of the satellite is known
as inclination.
A satellite is bound to the earths
gravitational pull as a planet is bound to
the Suns gravitational pull.

DIFFERENT TYPES OF
ARTIFICIAL SATELLITES
Geo-stationary Satellite : A satellite
which is at rest with respect to the earth is
called a geo-stationary satellite. The orbit
of such a satellite around the earth is
known as a geo-synchronous orbit.
Geo-stationary satellite plays an important
role in communication technology. In other
words, a communication satellite is a geostationary satellite.
Polar Satellite : Geo-stationary
satellites, orbiting about 36000 km above
Physics

[41]

or
.co
m

Specialised Establishments Operating Under DRDO

Vikram Sarabhai Space Centre (VSSC): Specialised in the development of satellite launch ve-

hicles and sounding rockets.

ISRO Satellite Centre (ISAC): The lead centre for satellite development, covering structures, ther-

mal systems, spacecraft mechanisms, power systems and satellite integration.

Satish Dhawan Space Centre (SDSC)-SHAR - Sriharikota Space Centre:India's prime launching

tut

pad facility, providing the launch infrastructure as well as solid propellant processing and their testing. A second launch pad has been recently built at SDSC-SHAR.
Liquid Propulsion Systems Centre (LPSC) : The lead centre in the area of liquid and cryogenic
propulsion for launch vehicles and satellites.
Space Applications Centre (SAC): Specialised in the development of payloads for communication,
meterological and remote sensing satellites; it conducts space applications research and development.
ISRO Telemetry, Tracking and Command Network (ISTRAC): It provides mission support to LowEarth orbit satellites and to launch vehicle missions.
Master Control Facility (MCF) : The monitoring and control centre for the geostationary satellites.
ISRO Inertial Systems Unit (IISU): Carries out research and development in inertial sensors and
systems and allied satellite elements.
National Remote Sensing Agency (NRSA) : An autonomous institution supported by DOS, it is responsible for acquisition, processing and distribution of data from remote sensing satellites, based
in Hyderabad.

sufficient in the space technology has to

fulfill the following requirements:

On the other hand, low to medium

altitude satellites are known as polar
satellites. These satellites move over the
orbit passing through the north and south
poles of the earth above the polar plane.
The orbit in which the polar satellite moves
is known as the polar orbit.

1. Fabrication of Satellite or
Spacecraft : Satellites play an important
role in the field of space research. Therefore,
an expertise is required for planning,
designing and fabricating the different types
of satellites or space crafts.

ssc
ex

the equatorial plane, are used for

communication purposes.

Polar satellites are not used for

communication purposes. They are used
for remote sensing and hence are known
as remote sensing satellites.

The orbit in which a polar satellite or

remote sensing satellite moves is such that
the satellite always passes over a particular
area of the earth at the same local time.
Such orbit of the satellite is known as sunsynchronous orbit (or polar orbit).

BASIC REQUIREMENTS FOR

SELF-SUFFICIENCY IN SPACE
TECHNOLOGY
Any country which intends to be self-

[42]

General Science

2. Designing and Fabrication of

Launch Vehicles : Launch vehicles are
required to put satellite in the orbit around
earth and to launch the space probe.
Therefore, these vehicles have to be
developed for the successful launching of
satellites.
3. Earth Control Station : When satellite
is put into orbit, its all operations have to
be controlled and guided by sending proper
command from surface of the earth. Such
commands are sent from the station
established on the earth.
4. Ground Facilities : The arrangements

or
.co
m

The Indian Space Rearcher Organisation

has set up a large number of organisations
and research centres across the country to
carry out research and developmental
activities in the field of space research and
technology.

Setting up of Rocket Launching

Facility : The Indias space exploration
programme began with the setting up of a
rocket launching facility at Thumba, near
Thiruvananthapuram (Trivandrum). India
launched its first rocket RH-75 in 1967
from the Thumba Equatorial Rocket
Launching Station (TERLS). Although this
rocket was very small (diameter = 75 mm),
yet it had all the basic features of a rocket.
Since then India never looked back and
today it has the honour to be the sixth
nation in the world in the field of space
technology.

tut

are to be made in order to get the benefit of

the information and data sent by the
satellite throughout the country. The signals
re-transmitted from the satellite are received
by the receiving antennas installed across
the length and breadth of the country.

ssc
ex

Physics

[43]

or
.co
m

SIMPLE HARMONIC
MOTION

The motion of a body which is repeated

identically after a fixed interval of time is
known as periodic motion and the fixed
interval of time is known as time period of
the motion.

Application of SHM are discussed as

below :

When the load attached to a spring is

pulled once a little from its mean
position & left free, it oscillates in simple
harmonic motion.

The motion of the hands of a clock is in

a periodic motion. The time period of the
hours hand is 12 hours, of the minutes
hand is 1 hour and of the seconds hand is
1 minute.

a simple pendulum etc. are simple

harmonic motions.

tut

PERIODIC MOTION

ssc
ex

The rotation of the earth about its axis

with a time period of 24 hours and the
revolution of earth around the sun with a
time period of 1 year are other examples of
the periodic motion.

SIMPLE HARMONIC MOTION

It is a special type of oscillation in which

the particle oscillates in a straight line, the
acceleration of the particle is always
directed towards a fixed point on the line
& the magnitude of acceleration is
proportional to the displacement of the
particle from this point. This fixed point is
called the centre or mean position of
oscillation. The simple harmonic motion is
an oscillatory motion which in turn is a
periodic motion. However, a periodic may
or may not be an oscillatory motion.
The motion of a freely suspended bar
magnet in the earths magnetic - field, of
the pendulum of a wall clock, of the bob of
[44]

General Science

The motion of liquid contained in Utube when it is compressed once in one

of the two limbs & left to itself, is simple
harmonic motion.

If a tunnel is dug along the diameter of

earth & a body is dropped in it, the
body will oscillate in simple harmonic
motion between the ends of the earths
diameter.

When the oscillation of a body in simple

harmonic motion is free from frictional
forces, its oscillations are undamped.
The amplitude and energy do not
change with time in an undamped
oscillation. The oscillation of a simple
pendulum in vacuum is an undamped
oscillation.

When the oscillation of a body in simple

harmonic motion involves frictional
forces, its oscillations are damped. The
amplitude and energy of the body in a
damped oscillation decrease with time.

Most of the oscillations in air or in a

medium are damped oscillations like
oscillation of the bob of a simple

When a body oscillates with its own

natural frequency without involving an
external periodic force, its oscillations
are called free-oscillations. The
oscillations of the string of a sitar when
plucked once and let free, of the bob of
a simple pendulum when once
displaced from its mean position and
let free and of the prongs of a tuning
fork when one of its prong is struck
once on a rubber and let free are
examples of free oscillations.
When a body oscillates with the help of
an external periodic force other than it
own natural frequency, its oscillations
are called forced oscillations.

All musical instruments consisting of

strings like sitar, violen Reasonant
Oscillations etc. produce forced
oscillations.

In an earthquake, the structures, whose

natural frequency matches the frequency
of the seismic waves, collapse. During an
earthquake sometimes, short and tall
structures remain uneffected while the
medium height structures fall down. This
happens because the natural frequencies
of the short structures happen to be higher
and those of taller structure lower than the
frequency of the seismic waves.

ssc
ex

or
.co
m

more natural frequencies. When a

mechanical structure is subjected to a strong
driving force that matches one of its natural
frequencies, the amplitude of oscillations
of the structure becomes very large.
Consequently, the structure may collapse.
It is for the same reason the marching
soldiers break steps while crossing a bridge.
In order to avoid effect of resonance the
aircraft designers make sure that none of
the natural frequencies at which a wing
can oscillate match the frequency of the
engines during flight.

tut

pendulum in air, of the stretched string

in air etc.

WAVES

When a system oscillates with its own

natural frequency, with the help of an
external periodic force whose frequency is
the same as that of the natural frequency
of the oscillating system, then the
oscillations of the system are called
resonant oscillations. The resonant
oscillations have very large amplitude. At
resonance, the oscillating system
continuously absorbs energy from the
agent applying external periodic force.

Wave is some sort of disturbance in

which, information and energy, in the form
of signals, propagate from one point to
another without the actual journey of the
medium. All our communications depend
on the transmission of signals through
waves. All radiations are waves.

RESONANT OSCILLATIONS

If the rhythm of pushing against the

ground is synchromized with the natural
frequency of the swing, it gives greater
heights due to resonance effect.
All mechanical structures have one or

Wave motion is a kind of disturbance

which travels through a medium on account
of repeated periodic vibrations of the
medium particles about their mean position
without any net transport of the medium.
Types of Waves : On the basis of
medium requirement waves are of two
types viz. (i) Mechanical or Elastic waves :
They require a medium for propagation.
Physics

[45]

or
.co
m

e.g. sound, waves on the liquid surface,

vibration of string, etc. (ii) Electromagnetic
waves : They do not require a medium for
propagation e.g light, X-rays, microwaves,
infra-red, ultra-violet rays, etc.

Longitudinal waves

On the basis of the mode of vibration

the waves are of two types viz.

R = Refraction

l (Wave Length) : For the transverse

wave the wave Length is equal to the
distance between the two successive crests
or troughs. It is also equal to the sum of the
width of a crest and a neighbouring trough.
For the longitudinal wave, the wave length
is equal to the distance between the two
successive compressions or rarefactions. It
is also equal to the sum of the width of a
compression and a neighbouring
rarefaction.

Transverse Wave Motion : It is the

type of wave motion in which the particles
of the medium vibrate about their positions
in a direction perpendicular to the
propagation of the wave. A transverse
wave is represented in the form of crest
and trough.

C = Compression

tut

(i) Transverse wave and (ii) Longitudinal

waves

When a stone is thrown in a pond,

transverse waves are formed. The vibrations
of the membrane a of drum, of the string of
a sitar, violin etc. produce transverse waves.

ssc
ex

Longitudinal Wave Motion : It is the

type of wave motion in which the particles
of the medium vibrate about their mean
positions in the same direction in which
the wave is propagated.

Sound produced from a source is a

longitudinal wave like vibrations of a
tuning fork, ringing of a bell, etc.

A longitudinal wave is represented in

the form of compression and rarefaction.

Frequency (n) : It is the no. of vibrations

produced per second. It is equal to the
reciprocal of time period i.e.
Frequency
Speed of a wave is given as
Speed = Frequency Wavelength

Transverse Wave

Time Period (T) : It is equal to time

interval taken to complete one vibration.

[46]

General Science

C
A mechanical transverse wave that
requires a medium can propagate through

TRIVIA

The sound waves are not dispersed in

air.

The weakest audible sound has intensity 1012 W/m2. Its loudness is equal to
1 dB.

If the intensity of sound increases by a

factor of 10 then the loudness increase
by 10 dB or 1B.

If the loudness of sound is changed

by 1dB, then the intensity of sound
changes by 26%.

A pendulum clock slows down in summer and goes faster in winter.

Sound waves are mechanical waves

which cannot travel in vaccum.

Sound waves do not propagate in sawdust because it is not a continous medium.

Mechanical waves propagate energy

and momentum, but they do not propagate matter.

tut

The prongs of a tuning fork vibrate

transversely and the stem vibrates longitudinally with the same frequency.

or
.co
m

solids and at the surface of liquids, but not

inside liquids and gases. However, a
longitudinal wave can pass through solids,
liquids and gases.

The point of contact of the stem and

prongs of the tuning fork is an antinode.

ssc
ex

Physics

[47]

or
.co
m

Sounds

tut

sounds are heard at the other end. The first

sound heard is propagated through steel
and the second one is propagated through
air.
An increase in the density of the
medium reduces the speed of sound. Moist
air has lower density than dry air and
hence speed of sound is more than that
moist air.

Sound is produced in a material

medium by a vibrating source. These
vibrations are carried by air, as a medium
and strike our ear drum. The ear drum
vibrates and the message is conveyed to
our brain and we hear the sound. A sound
heard persists for 0.1 second in brain. It is
called as persistence of hearing.
Depending upon the frequency range,
sound has three categories viz. (i) Infrasonic
(ii) Sonic and (iii) Ultrasonic or supersonic
sounds.

ssc
ex

Infrasonic sound has a frequency less

than 20Hz. Sonic sound is between 20 Hz
to 20,000 Hz. It is the audible range for
human ears. Ultrasonic sound has a
frequency greater than 20000 Hz. Both the
infrasonic and ultrasonic sounds are not
audible to human ear. However, a dog can
hear sound of frequency upto 50000 Hz
and a bat upto 10 5 Hz. Dolphins can
produce and detect sounds of frequency
upto 105 Hz.

Sound is a longitudinal wave. Its speed

in dry air is 332 m/s. The speed of an
object greater than the speed of sound is
known as supersonic speed. The speed of
sound depends upon elasticity, density,
temperature and motion of particles of the
medium of propagation. Higher the
elasticity of a medium, greater is the speed
of sound in it e.g. speed of sound in air is
332 m/s and in steel 5000 m/s. If one end
of a long steel rod is struck, two distinct

[48]

General Science

The speed of sound increases with rise

in the temperature of the medium. The
speed of sound in air increase by 0.61 m/
second for every one degree rise in
temperature above 0C.
The speed of sound increases along the
direction of wind velocity and decreases
against the wind velocity.
The speed of light is much greater than
that of sound. Hence, thunder is heard
much after the flash of lightning is seen.
Due to the same reason, spectators hear
the sound of ball on bat a little after they
see the batsman actually striking the ball in
a cricket match.
Sonic Boom : Sound produced by a
supersonic aircraft is heard as a loud
explosion on the earth. It is known as sonic
boom. However, a person inside the
supersonic aircraft cannot hear its sound.
Reflection of Sound : Sound waves
are reflected from the obstacles of size of
wavelength of sound and follow laws of
reflection similar to those of light. The

or
.co
m

reflecting obstacles can be walls, mountains,

clouds, ground, etc. Sound waves can be
focused after reflecting from a curved surface
in the same way as light waves.

(iv) to form stable emulsions of immiscible

like water and oil.

ECHO

(vi) to coagulate aerosols i.e. displaced fine

particles of a solid or a liquid in a gas,
e.g. dust, smoke, mist, etc.

to accelerate crystallisation of
substances and to produce oxidation.

tut

(vii) to liquify gels in the same manner as

they are liquefied by shaking.
(viii) in getting alloys
composition.

uniform

(ix) for washing silken fabrics.

ULTRASONOGRAPHY

Reflected sound is called echo. An echo

occurs when the reflected sound wave
comes back to the listener within a time
interval of not less than 0.1 second after the
original sound wave reaches the listener so
that a distinct repetition of the original sound
is perceived. It is so because the persistence
of hearing of sound is 0.1 sec. A sound can
be perceived only if stays back at least for
0.1 second or more on our ears.

(v)

ssc
ex

An echo is used to determine the speed

of sound in a medium. Exploration of
underwater petroleum deposits is done by
detecting echo of shock waves produced
by explosions on the water surface.

The wave phenomena like total internal

reflection, refraction and interference are
also given by sound waves similar to those
of the light wave.

SUPERSONIC OR ULTRASONIC
WAVES
These waves are used :

to determine the elastic symmetries of

crystals of solids and to detect flaws in
metals.

(i)

(ii) to find the velocity of sound in liquids

that also informs several physical and
chemical properties of the liquids.
(iii) for finding the depth of sea and to
detect the submerged rocks,
submarines and icebergs.

It is a technique used to form an image

or picture of a matter by using ultrasonic
waves. This technique is used in medical
science treatment. The medical sonography
is commonly known as ultrasound. In this
technique, ultrasound wave passes through
the organs to be diagnosed. The velocity of
wave depends upon the elasticity and
density of the tissues in the organ and an
echo is detected by a specific microphone.
The echo obtained from the tissues of the
organ is converted into electric signals on
the screen of ultrasonograph and the images
are recovered. The pattern of images helps
in diagnosis of the organs like heart, liver,
kidney, pancreas, etc.
Sound navigation and ranging : It is
device that transmits ultransonic waves
through water and records the vibrations
reflected i.e. echo from an objects. Sonar is
used in finding submarines, depth of sea,
rocks and mineral deposits, etc.
Biological Effects of Ultrasonic Waves :
Ultrasonic waves can kill or injure small
Physics

[49]

or
.co
m

Difference between Intensity and Loudness

Loudness
It is not an entirely physical
quantity.
2.
2.
It depends upon (i) sensitivity
of the ear and (ii) intensity of\
sound.
3. It has an objective existence i.e., it
3.
It has got a subjective existence
exists whether there is some
i.e, it exists only when some
listener or not.
listener is acually present.
4. Unit of intensity is Wm2.
4.
Unit of loudness is bel.
In a tape recorder of T.V. bass refers to low pitch and treble refers to high pitch. So when bass is on,
low pitch sounds of tabla and dholak become loud. When treble is on, high pitch sounds become
predominant.

received per second or the apparent

frequency of the source changes and is
not the same as that of the source. The
pitch of the note heard appears to rise if
they approach each other and appears to
fall if they recede away from each other.
The apparent change in frequency of a
sound wave due to a relative motion
between the source of sound and the
listener is known as Dopplers Effect. It is
equally observed for light too.

animals like frog, fish, etc. These waves

can destroy micro organisms like bacteria
and yeast.

tut

Intensity
It is a physical quantity.
which can be accurately measured.
It does not depend upon the sensitivity
of the ear.

In dental science, ultrasonic waves are

used for extracting the broken teeth, to detect
cracks or other defects in homogeneity
noticeable by reflection or absorption.

ssc
ex

Vibration of a Source of Sound : When

a source is sounded, it generally vibrates in
more than one mode. When it is sounded
gently, the source vibrates in a simple
manner and produces tones of lower
frequencies, but when the source is
sounded rapidly, the vibration becomes
complex and it gives rise to tones of higher
frequencies. The tones of the lowest
frequency are called the fundamental note
and the tones of higher frequencies are
called over tones. The notes of frequencies
which are integral multiples of the
fundamental frequency are called as
harmonics.

DOPPLERS EFFECT

When a source of sound and a listener

are at rest, the listener receives an
unchanged frequency produced by the
source. If there is a relative motion
between them, then, the number of waves
[50]

General Science

If a railway engine travelling with a

high speed with its whistle blowing is
approaching a listener, the frequency
appears to rise. The frequency appears to
fall just as the engine passes the listener.
Dopplers effect is used to detect a star,
a galaxy etc. It can be used to find out
whether a star/galaxy is approaching us
or receding away from us. It favours the
hypothesis of an expanding universe.
Dopplers effect is used in speed guns
used by police to measure the speed of
vehicles. This effect can be used to detect a
moving object as well.

MUSICAL SOUND
Sounds produced by oscillating strings
(sitar, piano, violin etc.), vibrating

Intensity : Intensity of sound is a purely

physical quantity, It is equal to the amount
of sound energy passing per unit time per
unit area around a point in a direction
normal to the area. Intensity is measured
in watt/m2 or watt/(cm)2.

Quality : It is the characteristic of

musical sound that enables us to distinguish
between the sounds of same intensity and
same pitch produced by two different
sources. Its cause is the difference in the
frequency and relative intensities of
overtones produced by two sources of
sound.

Threshold of Hearing or Zero Level

of Intensity : it is equal to 1016 watt/cm2
for a normal human ear which can just
hear a note of frequency of 1000 Hz.

or
.co
m

Intensity, loudness, pitch, quality, etc.

are characteristics of musical sounds.

The buzzing of bee or humming of a

mosquito has high pitch, but low intensity,
while the roar of a lion has a low pitch, but
high intensity. Frequency of ladies, voice is
generally higher than that of gents and
hence, a lady voice is always sharper than
a gents voice.

tut

membranes (drum), air columns (flute,

organ pipes), wooden blocks or steel bars
(marimba, xylophone) etc. produce a
pleasant effect on our minds and hence,
are known as musical sounds.

ssc
ex

Loudness : The sensation produced in

the ear that enables us to distinguish
between a loud sound and a faint sound is
called loudness.

Two sounds of equal intensity but

different frequencies may not appear to be
equally loud even to the same listener
because sensitivity of the ear is different for
different frequencies.

Loudness is measured in bel. one bel =

10 decibel (db). Both the intensity of sound
and loudness increase with increase in
amplitude of the sound wave, frequency of
the wave, density of the medium and
velocity of sound in a medium. They
decrease with increase in distance from
the source of sound.

Pitch : It is the characteristic of musical

sound which distinguishes a sharp sound
from a dull sound. Thus, it represents the
degree of shrillness of a musical note. Pitch
depends on the frequency of sound and
Dopplers effect.

Voices of two singers singing a duet,

voices of our friends, voices of family
members etc. can be distinguished from
each other on the basis of difference in
quality of the sound produced by them.

REVERBERATION

The persistene of sound after the source

has actually stopped producing sound is
called reverberation of sound and the time
for which the sound persists is called the
time of reverberation.
When a loud sound is produced by a
source in a hall it is partially absorbed,
reflected and transmitted by the walls,
ceiling and floor. If the source of sound
stops producing sound, the intensity of
sound decreases due to absorption of sound.
However, the sound continues to be heard
because of the persistence of the reflected
sound waves which go on traversing the
hall a number of times before they reach
an intensity below the threshold of hearing
i.e. the multiple reflection of sound results
in reverberation.
Physics

[51]

(i)

A few open windows.

(iv) Curved walls or corners should be

avoided so that sound is not unduly
concentrated and there are no regions
of silence.
The time of reverberation can be
decreased by increasing absorption of
sound. Reverberation should be small but
not absolutely zero because then the hall
gives a dead effect.
Diatonic Musical Scale : This scale
consists of 8 notes. From the note (1) to (8)
pitch increases due to increase in the
relative frequencies.

(ii) Sound absorbing soft materials like

cloth, asbestos, etc. or heavy curtains
put up in the hall at various places.

or
.co
m

For obtaining good acoustic property

the hall should have sufficient sound
absorbing features, like:

(iii) A good audience, because one listener

is equal to 5 square feet of an open
window.

tut

A room with zero reverberation time is

called a dead room. An ordinary syllable
takes about 0.2 seconds to decay. For a
musical sound, the optimum value of
reverberation time may be between 1 to 2
seconds. The reverberation time in the halls
like theatres, auditoria, etc. is adjusted
suitably by a specific design so that sound
heard is distinct and pleasant.

ssc
ex

[52]

General Science

or
.co
m

OPTICS

REFLECTION OF LIGHT

Laws of Reflection :

When a light ray is incident on a surface, it returns back into the same medium.

Reflection on a Plane Mirror : The

image formed by a plane mirror is virtual
& erect. The image distance is equal to the
object distance from the mirror. The image
is laterally inverted i.e., the right side of the
object appears as the left side of its image
& vice-versa. Lateral inversion is due to the
fact that the image of an object is as far
behind the plane mirror as the object is in
front of the mirror.

tut

Ray Optics : It is based on the

rectilinear propagation of light i.e., light
follows a straight line motion through a
given transparent medium. It involves
reflection, refraction & dispersion of light.

ssc
ex

(i) The incident ray, normal drawn at the

incident point and the reflected ray lie
in the same plane.
(ii) The angle of incidence is equal to the
angle of reflection. In the given figure

For a given incident ray, if the plane

mirror is rotated through an angle q then
the reflected ray rotates through an angle
of 2q.
The length of a plane mirror in which a
person can see his/her full image is half
the height of the person.
If two plane mirrors facing each other
are inclined at an angle q with each other,
then number of images of an object lying
between them are given by

XY = reflecting surface,
AB = incident ray,

BC = reflected ray,

DB = normal drawn at
the incident point.

Angle of incidence

i = ABD and angle of reflection

r = DBC

i = r or, ABD = DBC

(a) if n = an odd whole no. then n

images are formed
(b) if n = an even whole no., then (n 1)
images are formed.
e.g. (i) if angle between the two plane
mirrors is 60, then
no. of images formed by them
= 6 1 = 5.
Physics

[53]

Position of
image
At the focus

2. Beyond the
centre of
curvative
3. At the centre
of curvature

Between the
centre of curvature & focus
At the centre
of curvature

4. Between the
centre of curvature and focus
5. At the focus

Beyond the
centre of
curvature
At inifinity

6. Between pole
& focus

Behind the
mirror

Nature of
image
Real, Inverted &
diminished.
Real, Inverted &
Diminished
Real, inverted
& same size as
that of the object
Real, inverted
& magnified
Real, Inverted &
highly magnified
Virtual, Erect &
magnified

= = infinity.

i.e., infinte no. of images are formed.

ssc
ex

Use of Plane Mirror : Plane mirrors

are used as looking glasses, in a solar cooker
to reflect the sun-light, in a Kaleidoscope
to see colourful images, in a periscope
usually used in submarines to see outside
the water surface, in a barbars shop to see
the back portion of the head, etc.
Some important facts regarding the
image formation by a plane mirror :

When we see a series of images in a

thick plane mirror, out of these the second image is brightest.

Out of 26 alphabets (e.g., A, B, C etc.)

only 11 alphabets show lateral symmetry and the rest 15 alphabets have lateral inversion.

If the object is displaced by a distance

x towards or away from the mirror,
then its image will be displaced by a
distance x in the same sense.

[54]

General Science

If the mirror moves by a distance x

towards or away from the object, its
image will move by a distance 2x in
the same sense.

If the object moves with a velocity v

towards or away from the mirror, its
image appears to move with a velocity
2v in the same sense. The same is true
if the mirror moves.

Reflection on Spherical Mirrors :

Types of spherical mirrors
(i) Convex or Divergent Mirror : It is a
portion of a hollow sphere of glass whose
inner surface is silvered. Since rays incident
parallel to the principal axis are diverged
away the principal axis, hence, it is known
as a divergent mirror.

(ii) If the two mirrors are parallel, then

q = 0

or
.co
m

Position of
object
1. At infinity

tut

Image Formation in a Concave Mirror

(ii) Concave or Convergent Mirror : It

is a portion of a hollow sphere of glass
whose outer surface is silvered. All rays
incident parallel to its principal axis are
convergent at its focus.
The centre of a sphere whose certain
portion is convex or convave, is called a
centre of curvature. The middle point on the
spherical mirror is called as its pole. The mid
point between the pole and the centre of
curvature is the focus. The distance between
the pole and the focus is focal-length (f). The
distance between the pole and the centre of
curvature is radius of curvature (R). The
perpendicular drawn at a point where a ray
is incident on the spherical mirror must pass
through the centre of curvature.

Convex mirror

or
.co
m

Magnification or Linear Magnification (m) -

Spherical Aberration: The inability of

a concave mirror of a larger size to converge
all rays parallel to the principal axis at the
focus, is called spherical aberration.

Concave mirror

It can be removed by using a parabolic

concave mirror of larger aperture.

P = Pole
Px = Principal axis

tut

Uses of Spherical Mirrors:

C = Centre of Curvature
PC = Radius
PF = Focal Length
A & B : Incident points

A convex mirror is used as a reflector in

street lamps to diverge light over a large
area.

A convex mirror is used as a rear view

mirror or drivers mirror in cars, scooters etc. for looking at the traffic at the
rear of the vehicle because this mirror
produces an erect and diminished image of the traffic behind the vehicle. Since
the image is small in size, hence the field
view is much wider as compared to a
plane mirror or a concave mirror.

F = Focus

AC & BC = Normal drawn at incident

points.
Image formation in a convex Mirror.

ssc
ex

It always produces virtual and

diminished image irrespective of the
position of the object.

A concave mirror is used as a reflector

in search light, head lights of motor
vehicles, telescopes, solar cookers, etc.
to produce an intense parallel beam of
light. A bulb is placed at the focus of
the concave mirror. The beam of light
from the bulb after reflection from the
concave mirror goes as a parallel beam.

A concave mirror is used by dentists

and ENT specialists to focus light on
teeth, eye and throat to examine these
organs. The device consisting of the concave mirror used to examine eyes is
called Ophthalmoscope.

A concave mirror is used as a shaving

mirror or make up mirror as it can form
erect and magnified image of the person within its focus.

Real Image : It is always inverted and

in front of the concave mirror.
Virtual Image : It is always erect and
behind the concave and convex mirror.
Focal length is half of the radius of

curvature (f = R/2).
Mirror Formula :

Where u = objects distance from the

pole of mirror.

v = image distance from the pole of

mirror.
f = focal length of the mirror.
R = radius of curvature of the mirror.

Physics

[55]

Image : Size of mirror does not affect

the nature of the image except that a
bigger mirror forms a brighter image. A
virtual image cannot be taken on screen.
But our eye lens forms a real image of

or
.co
m

Some important facts regarding the

reflection of light:

the virtual image (acting as virtual

objects) on the retina. A virtual image
can be photographed.

The focal length of a plane mirror is

infinity.

When a spherical mirror (concave or

convex) is placed in a liquid e.g. water,
its focal length does not change because
focal length of a mirror depends upon
its construction and not on the external
medium.

tut

A spherical mirror can also be used as a

trick- mirror or magic mirror to see dif
ferent types of images of the same object or person.

ABC of Photometry

When we read a book, light is scattered

by the paper into our eyes. This is called
Diffuse-reflection. A printed paper has
a rough surface and hence, it cannot
produce a regular reflection. That is
why we read a book because of reflection of light but we do not see even a
faint image of ours in its printed pages.

ssc
ex

Luminance or Brightness (B)

Definition
visible light energy
luminous flux emitted
per unit solid angle
luminous flux that passes
through unit area in a
direction normal to area.
luminous flux reflected
from unit area into our eyes.

S.No. Term
1.
Luminous flux (f)
2.
Lumnious intensity or
Illuminating power (l)
3.
Illuminance or Intensity
of illumination of surface (E)

Unit
lumen
Candela or C.P.

(i) Lux or metre candle

(ii) phot or cm candle
Lambert

rarer medium, it bends away from the

normal to the interface separating these
two media. This phenomenon is known as
refraction of light.

REFRACTION OF LIGHT

When light goes from rarer (e.g. air) to

a denser (e.g. glass) medium, it bends
towards the normal to the interface,
separating these two media. On the other
hand, when light goes from a denser to

PO = Incident ray, AB = Interface

OQ = Refracted ray, i = Angle of incidence,
r = Angle of refraction.

Distinction between Real Image and Virtual image

Real Image
It is can be obtained on a screen.

3.
4.

[56]

Rays of light from the object, on reflection/

refraction, actually meet at the image.
It is always inverted.
Linear magnification is negative

General Science

Virtual image
1. Reflection of light occurs from the side which is bulged out.
2. Rays of light from the object, on reflection/ refraction only
appear to meet at the image.
3. It is always erect.
4. Linear magnification is positive.

or
.co
m

Laws of Refraction: (I) The incident

ray, the refracted ray and the normal to
the surface separating two media all lie in
the same plane.
(II) Snells Law:

of light in that it causes bending light from

straight path of original light.
Relative Refractive Index ()

where is a

where 12 = Relative refractive index of

medium 2nd w.r.t. 1st medium,

constant. is known as the refractive index

of the medium in which refracted ray
travels w.r.t. the medium in which the
incident ray travels.

C1, C2= speeds of light of the two media.

tut

l1, l2 = wavelengths of light of the two

media.

Cause Behind Refraction of Light: Due

to change in medium, wavelength of light
changes. It results into change in the speed

1 & 2 = individual refractive indices

of the two media

Difference between Concave and Convex Mirrors

Convex mirror
1. Reflection of light occurs from the side which is bulged
out.
2. Its focus and centre of curvature are at the back of mirror.
f and R, both are positive.
3. Image formed is always erect.
4. Size of image is always smaller than the size of
object.
5. Field of view is broad.

ssc
ex

Concave mirror
1. Reflection of light occurs from sunken side of
mirror.
2. Its focus and centre of curvature are on front
side of mirror. f and R both are negative
3. Image formed may be erect or inverted.
4. Size of image may be smaller, equal or larger
than the size of object.
5. Field of view is narrow.

Images Formed by Convex and Concave Mirrors

Position of Object
at

Position of Image
at focus

Convex
Concave
Concave
Concave
Concave
Concave
Concave

between and pole

at
beyond C.
at C
between F and C
at F
between F and P

between pole and focus erect

smaller than object
at focus
real and inverted smaller than object
between F and C
real and inverted smaller than object
at C
real and inverted same as size of object
beyond C
real and inverted larger than the object
at infinity
real
larger than the object
behind the mirror
virtual and erect larger than the object

Mirror
Convex

Deviation (d) of a light during refraction

in a medium increases with (1) increase in
refractive index (), (ii) increase in the
density (r) of the medium and (iii) decrease
in wavelength (l) i.e.

Nature of Image
erect

Size of Image
much smaller

Principle of Reversibility :
If the path of a ray of light is reversed
after suffering a number of refractions
Physics

[57]

or
.co
m

apparanet position of the star changes

continuously. It leads to the twinkling
of a star.

A rod appears bent in water due to

refraction of light.

The sun is visible to us before actual

sunrise & after actual sunset. The atmosphere has higher density than that
of outer space. Hence, light coming from
the sun enters outerspace to atmosphere
i.e., from rarer to denser medium. It
results in the bending of light. When
the sun is below the horizon before the
sunrise and after the sunset, its apparent position is visible above the horizon. Hence, the sun is visible 2 minutes
before the actual sunrise and 2 minutes
after the actual sun-set. Thus, the day
becomes longer by 4 minutes due to
effect of refraction.

tut

and reflections, then in the given figure

a light ray suffers refraction thrice at point
B, C & D. It follows path AB BC CD
DE. If the final ray DE is incident at 90
to a plane mirror M, it retraces the original
path as ED DC CB BA.

Some Common Effects of Refraction

Stars twinkle due to refraction. The different layers of atmosphere are of different (a) density, (b) temperature (c)
speed and their density, temperature
speed change continuously. Hence, the

ssc
ex

Real and apparent depths of an object

in water or any transparent medium.

Difference between Reflection and Total Internal Reflection

Total Internal Reflection
1. Total internal reflective occurs only when light is
travelling in denser medium and tending to go into rarer
medium.
2. Reflection takes place at all values of angle 2. It is possible only when angle of incidence in denser
of incidence.
medium is greater than critical angle for the pair of
media in contact.
3. Some energy gets absorbed or refracted
3. The entire energy is reflected. There is no absorption/
while majority of energy is reflected.
refraction.

(Simple) Reflection
1. Reflection occurs when light is travelling in
a rarer medium or in a denser medium.

Difference between convex lens and concave lens

2.
3.

Convex lens
The lens is thick at the middle and thin at
edges.
Image formed may be real or virtual.
Image formed may be equal in size, smaller
or larger than the object.
It converges the rays of light.
On moving sideways, image moves in
opposite direction.

4.
5.

[58]

General Science

Concave lens
1. The lens is thin at the middle and thick at edges.
2. The image formed is always virtual.
3. Image formed is always smaller than the object.
4. It diverges the rays of light.
5. On moving sideways, image moves in same direction.

AO = Real depth of object in water or a

transparent medium.
AI = Apparent depth of object.

then, =

or,

ssc
ex

Relative Refractive Index =

or
.co
m

If = relative refractive index of water

w.r.t.air.

tut

An object at O appears at I when it is

viewed from air.

& CO incident at point O from denser to

rarer medium. Ray AO is incident at angle
i1. Its angle of refraction is <NOB = 90. The
refracted ray OB is parallel to the surface of
denser medium. This angle is called as
Critical angle (i1 = c). Ray CO is incident at
an angle i2>i1. Its refracted ray is OD in the
denser medium. It means when a light ray
is incident at an angle greater than the
critical angle, it returns back to the same
medium. This phenomenon of returning
back of a light ray in the denser medium is
known as T.I.R. Critical angle (c): The angle
of incidence of a light ray in the denser
medium corresponding with the angle of
refraction in the rarer medium is 90 is called
as critical angle.

Since relative refractive index of water

is always greater than that of air ( } 1),
hence, real depth of an object is greater
then apparent depth.

Conditions for T.I.R. : (i) Light should

be incident from denser to rarer medium &
(ii) The angle of incidence should be greater
than the critical angle (c).
Some common cases of T.I.R. :

The Brilliance of Diamonds : The critical angle for the rays of travelling from
diamonds to air is about 24.4. The diamond is cut suitably such that light entering the diamond from any face falls
at an angle greater than 24.4, suffers
multiple total internal reflections at the
various faces, & remains within the diamond. The diamond sparkles due to the
light trapped in it.

Mirage : It is an optical illusion seen

usually in deserts by which an inverted
image of a distant object like a tree is
observed along with the object itself as
if reflected from the water - surface.

TOTAL INTERNAL REFLECTION

(T.I.R.)

When light is incident from denser to

rarer medium, it bends away from the
normal drawn at the incident point.

Let us consider two light - rays viz. AO

In hot desert, lower atmospheric layers

are rarer due to higher temperature than
those of upper layers. A ray of light
coming from the tree bends away from
Physics

[59]

Colour
Violet
Indigo
Blue
Green
Yellow
Orange
Red

Air bubbles in water or glass shine :

Water or glass is denser w.r.t. air. When
light is incident at an angle greater than
the critical angle, on going from water/ glass to air bubble, it suffers T.I.R.
Hense the air bubble shines brilliantly.
This effect is used in manufacturing
decorating glass objects.

Range of
wavelength ()
3900-4550
4550-4920
4920-5770
5770-5970
5970-6220
6220-7800

Range of frequnecy
( 1014 Hz)
7.69-6.49
6.59-6.10
6.10-5.20
5.20-5.03
5.03-4.82
4.82-3.84

Refraction Through Lenses

tut

Lens is a transparent medium bounded

by two refracting surfaces. Out of these
two refracting surfaces at least one is
spherical.
A lens can be regarded as combination
of a larger no. of small prisms. When a
beam of light is incident on a lens, the rays
of light get refraction through these prisms.

Totally Reflecting Prisms : These prisms

are right angled isosceles prisms which
turn the light through 90 or 180. The
critical angle for glass-air interface is 42
& in these prisms the angle of incidence
is 45. Thus, the angle of incidence becomes greater than the critical angle that
causes total internal reflection. Such
prisms are used in periscopes.

Structure of a lens:

ssc
ex

Seven Colours of Visible Light

or
.co
m

the normal as it travels from denser

upper layer to the rarer lower layer.
This process continues till the angle of
incidence is less than the critical angle.
At a particular layer of air the angle of
incidence becomes greater than the
critical angle and it gives rise to the
T.I.R. It gives the impression of a water
pond near the tree i.e. mirage.

Combination of Colours

(a) Triangle representing primary colours and

complementary colours is :
(i) R + G + B = W
(ii) B + Y = W
(iii) R + C = W
(iv) G + M = W
(b) Triangle representing complimentary
colours and their combination is :
(i) B + Y = G
(ii) R + B = M
(iii) Y + R = O
(iv) Y + M = B + O = R + G = Black

(i) Principal Axis : It joins the two centres

of curvature of the two spherical
surfaces of a lens.
(ii) Optical Centre : The central point
inside the lens where the passing ray
remains undeviated is called optical
centre.
(iii) Principal Focus : It is a point on the
principal axis where the rays of a
parallel beam of light meet or appear
to meet after being refracted through
the lens.
(iv) Focal Length : It is the distance
between the principal focus & the
optical centre.

Difference between Primary and Secondary Rainbow

Primary Rainbow
1. It is much brighter.
2. Outer arc is red and inner arc is violet.
3. Incident ray of light undergoes one total
internal reflection.

[60]

General Science

1.
2.
3.

Secondary Rainbow
It is fainter.
Outer arc is violet and inner arc is red.
Incident ray of light undergoes two total internal
reflections.

or
.co
m

A biconvex or a biconcave lens has two

centres of curvature and two foci.

Power of a Lens (P)

Convex Lens

Its S.I. unit is Dioptre (D). ID = 1m1.

Smaller the focal length of a lens higher is
its power.
Common Defects of Vision

tut

Concave lens

Long sightedness (Hypermetropia): A

person suffering from this defect can
see objects far away but cannot see the
nearer object. In this defect eye forms
the image of an object behind the retina.
For correct vision image should be
formed at the retina only. This defect is
corrected by using a convex (converging) lens of suitable focal length.

XY = principal axis, C = optical centre,

C1 & C2 = Centres of curvaturess

ssc
ex

F1 & F2 = foci of lens.

Image formation by a lens :

(1) A convex lens can form both the real as

well as the virtual images depending
upon the position of the object.
(2) A concave lens forms always a virtual
image.

Short-sightedness (Myopia) : A person suffering from this defect can see

the nearer objects clearly but is unable
to see objects far away. In this defect
the image is formed in front of retina.
This defect is corrected by using a concave lens of suitable focal length.
Some facts regarding the Lenses :

(1) If a convex and a concave lens of the

same focal length are put in contact the
combination acts as a glass slab.

Defects of Human Eye

What it is
(i) Eye can see distinctly
only the near objects,
(ii) Far point of eye comes
closer than infinity.
2. Hypermetropia or
(i) Eye can see distinctly
Long sightedness only the far off objects,

Defect
1. Myopia or Short
sightedness

Cause
Focal length of eye lens
decreases. Rays from
focus at a point in front
of the retina.
Focal length of eye lens
increases. Rays from near

(ii) Near point of eye

point focus at a point at

shifts away from the eye.

the back of ratina.

Remedy
Using a concave lens of
focal length = distance of
far point from defective eye.
Using a convex lens of focal
length (f) where
Here,
u = distance of object from eye
lens v = distance of near point
of defective eye.

Physics

[61]

or
.co
m

(7) When a lens is placed in a medium of

equal density, it acts as a glass slab. Its
focal length becomes infinity and
power becomes zero.

(2) If a convex and a concave lens of the

same focal length are placed co-axially
with a small separation between them,
the combination acts as a convex lens.
(3) If a lens is cut into two equal halves
with a plane perpendicular to the
principal axis, the focal length of each
part doubles.

OPTICAL INSTRUMENTS

(4) If a lens is cut into two equal halves

with a plane along the principal axis,
the focal length of each part remains
unchanged.

Microscope : It is used to magnify

minute objects close to us.

tut

(i) Simple Microscope (Magnifying

glass) : It is a biconvex lens. When an
object is placed within its focus, a
magnified, virtual and erect image is
formed.

(5) An air bubble in water behaves as a

concave lens.

(ii) Compound Microscope : It consists

of two convex lenses of unequal size placed
co-axially. The larger lens is eye-lens to see
the final image and the smaller lens is object
lens in front of which the object is placed.
The object lens forms a real inverted image

(6) When a lens is placed in a medium of

higher density (higher refractive
index), the nature of the lens reverses
i.e. a converging lens behaves as a
diverging lens & vice-versa.

ssc
ex

Difference between Astronomical and Galilean Telescope

Astronomical Telescope
1. Used for observing far off objects in the sky.
2. Final image is inverted w.r.t. the object.
3. Eye piece is a convex lens.

1.
2.
3.

5. Length of telescope tube is greater, L = f0 + fe

of the object. This image is formed within the

focus of the eye-lens and acts an object for
the eye-lens. The eye-lens forms a highly
magnified virtual image of the object.
Telescope : It is used to see far off
objects.

(i) Astronomical Telescope : It is used

to see stars, planets etc.
It consists of two convex lenses. The
larger one is the object lens and the smaller
one is the eye lens. The real image formed
by the object lens within the focus of the
[62]

General Science

Galilean Telescope
Used for observing far off objects on the ground.
Final image is erect w.r.t. the object.
Eye piece is a concave lens.

Length of telescope tube is smaller, L = fo fe

eye-lens, acts as an object for the eye-lens

which gives the final, virtual and highly
magnified image.

DISPERSION OF LIGHT
When white light passes through a glass
prism, we get seven colours on a white
screen. This phenomenon is known as
dispersion of light. These seven colours
obtained are viz. violet, indigo, blue, green,
yellow, orange and red. They can be
remembered as VIBGYOR. Dispersion of

or
.co
m

light occurs due to refraction of light of

different wavelengths contained by white
light. Smaller the wavelength of light, more
is its deviation. Since wavelength increases
from violet to red light, hence, the deviation
decreases from violet to red light. A band
of seven colours of white light obtained by
dispersion is known as a spectrum.

They are :

Spectroscope (or Spectrometer) : A

device used to disperse light and to observe
the spectra obtained is called spectroscope.

(1) Magenta (M) = Red + Blue

(3) Cyan (C) = Green + Blue

(4) White (W) = Red + Green + Blue.

Complimentary Colours : Any two

colours are said to be a pair of
complimentary colours if these colours
produce white, when mixed together e.g.

Colour of any object is the same as is

reflected by the object and received by our
eyes. e.g. when white light falls on a redrose, it reflects only wavelength of red
colour and absorbs all other colours of white
light. Hence, it appears red.

tut

COLOUR OF OBJECTS

(2) Yellow (Y) = Red + Green

ssc
ex

Pigment : It imparts colour to the

objects. A pigment absorbs most of the
colours of white light and reflects one or
more colours e.g. (i) A red rose appears
black in green light. A red pigment in rose
absorbs the green light and reflects nothing.
So red rose appears black. (ii) A yellow
flower appears red in red light. This is
because yellow pigment in the yellow
flower cannot absorb red light and hence,
reflects the red light.

Primary Colours : They cannot be

obtained by mixing two or more colours.
They are viz. Red, Blue and Green. When
they are mixed together, the result is white
i.e. Red + Blue + Green = White
Secondary Colours : When two
primary colours are mixed, the new colour
is a secondary colour.

(i) Yellow + Blue = White

Red + Green + Blue = White & Red +

Green = Yellow.
(ii) Magenta + Green = White
Red + Blue + Green = White & Red +
Blue = Magenta.

(iii) Cyan + Red = White

Green + Blue + Red = White & Green
+ Blue = Cyan.

Thus, the complimentary pairs are

(i) Yellow + Blue, (ii) Magenta + Green &
(iii) Cyan + Red.
Physics

[63]

Because, this mixture of pigments

absorbs all colours of white light and reflects
nothing, so it appears black.
Secondary Pigments : When a pair of
primary pigments are mixed together, a
new pigment is obtained called secondary
pigment. They are:

(i)

Cyan pigment + Yellow

pigment
(ii) Cyan pigment +
Magenta pigment
(iii) Yellow pigment +

Secondary
Pigments
Green Pigment
Blue Pigment
Red pigment

ssc
ex

Magenta pigment

Thus, the secondary pigments are

Green, Blue and Red pigments.
The primary pigments are same as that
of secondary colours whereas the
secondary pigments are same as that of
primary colours.

SCATTERING OF LIGHT

When light passes through a medium

and falls on the particles of the medium, it
gets scattered in all directions. The intensity
of scattered light decreases with increase
in the wave length of light i.e., smaller the
wavelength of light, more is the intensity
of its scattering. e.g.
(i) Blue colour of Sky : Most of the blue
colour of white light coming from the
sun gets scattered by atmospheric
[64]

General Science

(ii) The sun looks red at the sunrise and

sunset: The red colour is scattered least
due to its longest wavelength and
hence, the red-light is able to travel
maximum distance in atmosphere. At
the time of the sunrise and sunset, the
position of sun is lower in sky and
hence, it looks orange-red.
(iii) Due to least scattering of red-colour,
it is used as a sign of danger-signals.
Rainbow : It is a spectrum of suns
light in nature. It occurs in the form of arcs
of concentric coloured circles in the sky,
when the suns light falls on rain drops.
Rain-drops act as tiny prisms that cause
dispersion of light. The essential condition
for observing a rainbow is that the observer
must stand with his back towards the sun.
Rainbow is formed due to the total internal
reflections and refractions caused by rain
drops.

Primary Pigments

or
.co
m

Yellow pigment + Cyan pigment +

Magenta pigment = Black pigment.

particles because blue colour has

smaller wavelength.

tut

Primary Pigments : They are Yellow,

Cyan & Magenta. When these three
primary pigments are mixed in equal
proportion a black pigment is obtained.

Wave-Optics : Light is a transverse

wave lying under the electromagnetic wave
spectrum. Its speed in vacuum is 3 108m/
s. It can undergo different wave
phenomena like reflection, refraction,
dispersion, interference, diffraction,
polarisation, superposition, etc.

INTERFERENCE OF LIGHT
It involves superposition of two light
waves at a point in the medium of
propagation of light. When these light
waves superpose crest to crest or trough to
trough, the result is constructive
interference whereas crest to trough
superposition results in destructive
interference. Coloured soap bubbles and

In old oil paintings to improve colour

contrast.

In optical stress analysis.

In calculators and watches, letters and

numbers are formed by LCD (liquid
crystal display through polarisation of
light.

Polarisation of scattered sunlight is used

for navigation in solar compass in polar regions of earth, where magnetic
compass becomes non-functional.

Uses of Polaroids :

In CD Players, polarized laser beam

acts as needle for producing sound from
compact disc, which is in encoded digital format.

Polaroids : Materials that polarise light.

Most of them are artificial. Tourmaline is a
natural polaroid.

tut

POLARISATION OF LIGHT
It involves restricting all vibrations of a
light wave in a single plane.

or
.co
m

oil film on water surface are observed due

to interference of white light. For this
thickness of wall of the bubble and oil film
should be of the order of wavelength of
visible light (4000A to 8000A). The
phenomenon of interference is used in
holography (three dimensional virtual
image formation) by using a laser beam.

In Sun glasses to protect the eyes from

glare.

In head light of motor-car to reduce

glare.

In wind shields of automobiles.

In holograhy (3D Motion pictures)

ssc
ex

Polarisation is used to study asymmetries in crystals and molecules using

the phenomenon of optical activity.
The ability of a crystal or molecule to
rotate the plane of polarised light,
either clockwise or anticlockwise is
called optical activity.

Physics

[65]

or
.co
m

HEAT

TEMPERATURE

ssc
ex

It is the degree of hotness or coldness of

the body. It is just a scale that measures the
thermal state of a body. All bodies in thermal
equilibrium are assigned equal temperature.
A hotter body is assigned higher temperture
than a colder body. The temperatures iof
the two bodies are said to be in thermal
equilibrium if no transfer of heat occurs
when they are placed in contact.

Scales of Temperature : Common

scales for the measurement of temperature
are (i) degree centigrade or degree celsius
(C) (ii) Kelvin (K) and (iii) degree
Fahrenheit (F) scales. They are related to
each other as follows :

or,

TK = tC + 273, tC

[66]

General Science

tut

The temperature of a body is measured

by a
Thermometer: There is no upper limit
of temperature but there is a fixed lower
limit. The lowest value of temperature is
called as Absolute Zero. The absolute zero
is equal to zero kelvin (OK) or ()273.15C.
Clinical Thermometer : It is a mercury
in glass type thermometer. The
thermometer scale is marked from 95F to
110F or 35C to 43C within the range of
human body temperature. Advantages of
mercury in the thermometer-

Heat is the form of energy that flows

from a body at higher temperature to
another body at lower temperature, when
the two bodies are in contact with each
other. Every body is composed of a large
no. of particles which possess certain kinetic
energy. The total sum of kinetic-energy of
all constituent particles of a body is equal
to heat contained by the body.

& so on.

(i) it is opaque and shining and hence,

temperature can be read easily.
(ii) it is a good conductor of heat & hence,
measures temperature quickly.
(iii) it does not stick to the wall of glass tube
& also does not vaporize much &
hence, gives correct readings.
A clinicial thermometer should not be
sterilized in hot water otherwise mercury
will expand too much and break the glass.
Instead of mercury, water cannot be used
inside the clinical thermometer because it
freezes at 0C whereas mercury freezes at
() 39C. Hence, in the cold countries where
temperature in winter is usually less than
0C, alcohol thermometers are useful. The
temperatures recorded in the weather
forecasting are carried out by using a special
type of thermometer called the sixs
maximum and minimum thermometer.

or
.co
m

A small gap is always left in between

two iron-rails in a railway line.

SPECIFIC HEAT

The increase in length, area or volume

of an object due to rise in its temperature is
called as thermal expansion. The object
shows contraction due to decrease in its
temperature. The expansion/contraction
of an object depends upon the change in
temperature & its nature i.e. expansivitiy.

The specific heat of a substance is equal

to the amount of heat absorbed by its unit
mass to raise its temperature through one
degree. Thus, larger the value of specific
heat of a substance, smaller is rise in its
temperature inspite of absorbing a large
amount of heat. The specific heat of a
substance depends upon the nature and its
physical state. As specific heat capacity of
water is large (4200 J kg1k1), hence, by
absorbing or releasing large amounts of heat,
temperature of water changes by small
amounts. That is why water is used in hot
water battles and also as coolant in radiators.

An iron rim to be fitted on a wooden

cart wheel is always slightly small in
diameter. The rim on heating expands
and upon cooling gives a strong grip on
the wheel due to contraction.

tut

Practical applications of thermal

expansion:

increases with increase in temperature from

0C to 4C. But its volume increases and
density decreases with increase in
temperature above 4C. Thus, the density
of water is maximum at 4C. This unusual
expansion of water has a favourable effect
for aquatic animals. Since the density of
water is maximum at 4C, water at the
bottom of lakes, ponds etc. remains at 4C
in winter even if at the surface it freezes.
This allows marine animals to remain alive
and move near the bottom.

THERMAL EXPANSION

Some suitable space is left between the

girders used for supporting bridges.

ssc
ex

A glass stopper jammed in the neck of

a glass bottle can be removed by warming the neck of the bottle.
The clock pendulums are usually made
of invar (an alloy), which has very low
expansivity. This enables the clock to
keep correct time in different seasons.

VAPOURS
A vapour is a gas that can be liquified
by increasing the pressure without
changing the temperature. Gas and vapour
are two distinct state of matter. A gas
cannot be liquified by the application of
pressure alone, howsoever large the
pressure may be. However, a gas can be
liquified by applying high pressure
lowering the temperature.

Unusual Expansion of Water : The

volume of water decreases & density

When the molecules of a liquid escape

the liquid surface slowly, it results in vapour

Bimetallic Strip : It consists of a brass

layer & an invar layer riveted together.
The expansivity of brass is more than that
of invar. Hence, due to rise in temperature
the strip expands into a curved shape
having brass on the convex side. When
temperature decreases, the strip retains
original shape. Bimetallic strips are used as
switches in thermostats which are used for
regulating temperatures of electrically
heated rooms, ovens, toasters, etc.

Physics

[67]

HUMIDITY

ssc
ex

The amount of water vapour in a unit

volume of air is called the Absolute
humidity of air. Generally, it is expressed
in gm/m3. The ratio of the amount of water
vapour present in a given volume to the
amount of water vapour required to
saturate the volume at the same
temperature is called the relative humidity
(R.H.). The R.H. can be given in terms of the
following ratios as R.H.

[68]

General Science

or
.co
m

Generally, relative humidity (R.H) is

expressed in a percentage. If the above
ratio is 0.5, the relative humdity is 50%. If
the air is already saturated, the R.H. is
100%.

tut

Dew : In winter nights, the atmospheric

temperature goes down. The surfaces of
window-panes, flowers, grasses etc. become
still colder due to radiation. The air near
them becomes saturated & condensation
begins. The droplets condensed on such
surfaces are called as Dew.
Fog : In winter, if temperature goes
down even more, the whole atmosphere in
that region may become saturated. Small
droplets then condense on the dust particles
present in the air. These droplets keep
floating in the air & form a thick mist
which restricts visibility. This thick mist is
called Fog.

above the surface and this process is known

as evaporation. Evaporation lowers the
energy of a liquid and hence, causes cooling
effect. This effect is used in cooling water
in pitchers having porous walls. When a
space contains the maximum possible
amount of vapour, the vapour is called
saturated. If the amount is less than
possible maximum amount of vapour, the
vapour is called unsaturated. The possible
maximum amount of vapour depends on
the temperature & can be achieved easily
due to rise in temperature of the liquid.
The pressure exerted by a saturated vapour
is called saturation vapour pressure (SVP).
The temperature at which the saturation
vapour pressure becomes equal to the
present pressure is know as Dew-Point. If
the temperature is decreased below the
dew point some of the vapour condenses.

In winter, glass-walls of a house,

window & car-glass get wet on its outer
surface. It occurs due to the condensation
of water-vapour in the atmosphere on the
glass surface as the temperature inside
house or car is relatively higher than outer
temperature. In summer, body temperature
is regulated by the evoporation of sweat.
However, at higher humidity in air, the
rate of evaporation from the body slows
down and sweat starts rolling off in streams.
Sitting under a fan then increases the rate
of evaporation due to moving air. The
increased evaporation produces cooling.
The human body is comfortable at a
temperature between 23C to 25C at a
relative humidity between 60% to 65%. An
air conditioner regulates these conditions
of temperature and humidity inside a room.

or
.co
m

Efficiency of a heat engine is always

less than 1 or 100% because a heat engine
cannot convert total heat supplied to it
into mechanical work.
A heat engine consists of three
components viz.
(i) Source of heat : It is at higher
temperature from which the engine gets
heat.
(ii) Working Substance : It converts
the heat obtained partly into mechanical
work & supplies the remaining heat to the
sink.

ssc
ex

The energy of a certain mass of a liquid

in its vapour state is more than in its liquid
state. When heat is supplied to a liquid, its
kinetic energy increases and at a certain
stage, the molecules anywhere in liquid
can form vapour bubbles. These bubbles
float to the surface and finally vapour
molecules come out of the liquid. This
phenomenon is known as boiling and the
temperature at which boiling occurs is
known as boiling point. At the boiling point,
the vapour pressure at the liquid surface
becomes equal to the atmospheric pressure.
Hence, higher the atmospheric pressure at
the liquid surface higher is the boiling point
of liquid. Water boils at 100C when the
atmospheric pressure is 1 atmosphere. 1
atmosphere is equal to 760 mm of mercury.
If the pressure becomes 2- atmosphere,
water boils at 120C. In pressure cooker
water boils at temperatures higher than
100C due to highly increased pressure.
The increased boiling point allows water
to hold more heat which cooks food-faster.
At higher altitudes, atmospheric pressure
is reduced. It lowers the boiling point of
water and food takes longer time to cook.
Hence, a pressure cooker is more useful for
cooking on hill-stations.

tut

BOILING OF A LIQUID

the ratio of the mechanical work done by

the engine to heat supplied to it i.e.,

HEAT ENGINES

A heat engine converts heat into

mechanical work. It takes heat from a body
at higher temperature, converts a part of
heat into the mechanical work & delivers
the rest to bodies at lower temperature.
The working substance inside the heat
engine comes back to the original state.
Thus, a heat engine works in cyclic process.
The efficiency of a heat engine is equal to

(iii) Sink : It is at lower temperature to

absorb unused heat.
Types of Heat Engine :

(i) External Combustion Engine : In an

external combustion engine, heat is
produced by the burning fuel in a chamber
outside the body of the engine e.g. steamengine. Super heated steam at 250C & 20
atmospher is its working substance.
Practically, its efficiency is about 12% to
16%.
(ii) Internal Combustion Engine : In
this engine, heat is produced by burning of
fuel inside the body of engine e.g. Petrol &
diesel engine. Its working substance is a
mixture of air (98%) and fuel (2%). Petrol
engine with a practical efficiency of 26% is
used in light vehicles while diesel engine
with a practical efficiency 40% is used in
heavy vehicles.
(iii) Refrigerator or Heat Pump : It is a
heat engine working in reverse direction.
Physics

[69]

or
.co
m

For a given body, the rate of flow of

heat by the conduction is directly
proportional to the cross-sectional area,
proportional to the temperature difference
between the ends & inversely proportional
to the distance between the ends. Hence, a
thick & short metallic rod conducts more
heat in a given time across its two ends
than a thin & longer metal-rod.
Applications of Thermal Conduction:

ssc
ex

The freezer is surrounded by a copper

coil in which freon evaporates that causes
cooling effect. The vapour is removed and
condensed to form liquid in the condenser
coil, fitted at the back of the cabinet, by a
compression-pump or compressor. The
condenser coil becomes warm due to the
liquification of vapour. Again, the liquid
begines to evaporate & this cyclic process
continues. A thermostat switch regulates
the temperature inside the refrigerator by
switching the compressor on and off at
intervals. When the refrigerator is
defrosted, the temperature inside it
increases. Hence inner ice content melts.
Defrosting is necessary for better working
of the refrigertor.

than liquids & liquids are better conductors

than gases. Metals are much better
conductors than non-metals. Metals have
free moving electrons which carry heat
from one point to the other in a metal.

tut

Its working substance takes an amount of

heat from a cold body, converts it partly
into work & supplies the heat left to the
hot body. Food stuffs, water, etc. inside the
refrigerator act as a source of heat. A highly
volatitle liquid, Freon (dichlorodifluoro
methane) is its working substance. The outer
surrounding at higher temperature acts as
sink.

HEAT TRANSFER

Conduction, convection and radiation

are the three methods to transfer heat from
one point to another. Usually, conduction
takes place in solids, convection in liquids
& gases and radiation does not require a
medium.

A. Conduction : It involves heat-transfer

from the hot end of a body to its cold end
due to molecular collision to minimise the
temperature difference. However, the
conduction does not involve the actual
movement of the molecules of the medium.
In general, solids are better conductors

[70]

General Science

Cooking utensils are made of metals

whereas their handles are made of plastic or wood because metals are better
conductor and plastic & wood are poor
conductors. Hence, hot utensils can be
easily held by their insulating handles.
In winter, metallic handle of a wooden
door appear colder because it is a good
conductor. Heat flows from our body
to the handle which gives the sense of
cold.
Eskimos live in double walled snow
huts called igloos. Air enclosed between
the walls of ice is a bad conductor and
ice is also a bad conductor. It prevents
the heat they produce from escaping
and keeps them warm.
Saw dust is a poorer conductor of heat
than the wood from which it is made
because of air trapped in the saw dust.
In winter, birds often swell their feathers. Air enclosed between their body
and feathers does not allow flow of
heat from the body of the birds to the
cold surroundings.

Applications of Thermal Convection:

Function of ventilation in houses is based
on the convection. During winter, air
comes out from houses because the inside temperature is high whereas in
summer air comes in because the outer
temperature is high. It involves the
movement of air from high in temperature to lower temperature by convection currents.

Two thin blankets together are warmer

than one blanket of their combined
thickness. The air contained in between
the two blankets is a bad conductor
and it prevents heat from escaping and
keeps the body warm.

or
.co
m

A new quilt is warmer than an old one.

The new quilt encloses more air than
the old one. This air, being bad conductor of heat, does not allow heat of our
body to flow to the surroundings.

energy and hence, they move towards the

cold region and in order to occupy their
position the cold molecules come from the
cold region. It results convection currents
and consequently the entire system gets
heated. Convection is common in liquids
and gases.

tut

Ice is packed in gunny bags or sawdust. Air trapped in the saw dust blocks
the transfer of heat between the cold
ice and the surroundings. It prevents
the melting of ice.

ssc
ex

In airconditioned rooms, double layered windows are preferred than the

single layered windows because a thin
layer of air is contained between the
two layer of glass panes in the window.

In winter, a stone floor feels cold to the

bare feet, but a carpet on the same floor
feels warm even though they, are at the
same temperature. Since the stone is a
better conductor of heat than the carpet, hence the feet feel cold on the stone
but not on the carpet.

Due to the continuous working of a

refrigerator, a thick layer of ice deposits
on the outside and the inside of the
freezer and hence, it has to be switched
off for defrosting. The cooling action of
the freezer slows down because ice is a
bad conductor of heat. Hence, defrosting improves the functioning a refrigerator.
B.Convection : It involves the transfer
of heat due to the movement of molecules.
The hot molecules have higher kinetic

In refrigerators, freezer is set at the top.

Temperature of air at the bottom is
higher than that inside the freezer. The
warm bottom air moves up and cold
freezer air moves down. It results convection current of air in the refrigerators that cools the entire inner space.

In geysers and waters heater, the heating elements are fitted at the bottom. It
causes hot-bottom water to move up
and cold top-water to move down and
thereby setting up a convection current. Consequently entire water content gets heated.

In electric ovens, the heating elements

are fitted near the bottom to heat the
entire enclosed air by convection.
Monsoons, trade wind in sea, water
streams in sea, winds, etc. are due to
the convection.
The main mechanism for heat transfer
inside a human body is forced convection through blood which is circulating
by the pumping action of heart.
Physics

[71]

or
.co
m

polished so that it does not lose heat by

radiation. White or light colours of
houses keep cooler in summer because
light coloured surface do not absorb
much solar radiation.

tut

Thermos Flask : It is a double walled

glass bottle having a vacuum between
the walls. The inner wall is silvered
whose mouth is closed by a plastic
stopper. The vacuum does not allow
the loss of heat by convection and the
stopper being insulator does not allow
conduction of heat. The silvered wall
prevents radiation as it is a poor emitter
and a poor absorber of radiation. Thus,
in a thermos flask transfer of heat by
conduction, convection and radiation
is minimised. Hence, a hot liquid in it
remains hot and a cold liquid or ice in it
remains cold for a longer time.

C. Radiation : Heat transfer by

conduction and convection requires a
material medium whereas heat transfer by
radiation does not require a medium. All
bodies radiate thermal radiations at all
temperatures. The amount of heat
radiation radiated per unit time depends
on the nature of the radiating surface,
surface area and temperature of the body.
Similarly, all bodies absorb a part of thermal
radiation incident on them. When an
amount of thermal radiation is incident on
a body, it is partly absorbed, partly reflected
and partly transmitted. The amount of
absorbed, reflected and transmitted thermal
radiation depends on the nature &
temperature of the body.

ssc
ex

When a body absorbs more and emits

less radiation, its temperature goes up; when
a body emits more and absorbs less
radiation, its temperature goes down and
when a body absorbs and emits equal
amount of radiations, its temperature
remains constant. A good absorber is a good
emitter and a poor absorber is a poor emitter.
A body that absorbs all the radiations falling
on it is called a black body.

Applications of Black Body: Such a

body will emit radiation at the fastest rate
on heating. Lampblack is close to a
blackbody. Bolometer and thermopile are
close to a blackbody. Bolometer and
thermopile are instruments used to measure
thermal radiation.

A rough black surface is a good emitter

as well as a good absorber of heatradiation while a bright polished surface
is a bad emitter as well as a bad
absorber. Hence, a bright polished cup
keeps tea or coffee warm for a longer
time in comparison a rough black cup.
The base of an electric iron is highly
[72]

General Science

At a point in front of fire, heat is received

due to radiation only, while at a point
above the fire, heat is received both due
to radiation and convection. Hence, it
is hotter at the same distance over the
top of a fire than in front of it.
When animals feel cold, they curl their
bodies in a ball so as to decrease the
surface area of their bodies. As total
energy radiated by a body is
proportional to the surface area of the
body, the loss of heat due to radiation
would be reduced.
A box or a house with glass walls or
glass windows, acts as a green-house
because it traps heat radiations entering
it through glass. The glass allows the
heat radiation inside but blocks the hotair from comeing out. Hence, a car
parked in the sun with its windows
closed gets terribly warm in comparison
to the outer atmosphere.

or
.co
m

It states that the rate of loss of heat

from a hot body is directly proportional to
temperature difference between the body
and its surroundings.
A hot water during cooling from 100C
to 90C takes less time than that in cooling
from 50C to 40C. Hence, when hot water
and fresh tap-water are placed inside a
refrigerator, the rate of cooling of hot water
is found to be faster than that of fresh-tap
water.
If hot coffee is served with cream in a cup
and without cream in another cup, the
creamed coffee remains hot for a longer time.

Glass, which is ordinarily used as the

base in photographic plates, is
transparent to light while opaque to
thermal infra-red radiation. But certain
special kinds of glass have been
prepared which are transparent only
to thermal infra-red. Such glasses, used
in the preparation of photographic
plates, have made it possible to obtain
long distance photographs, even under
misty conditions using infra-red
radiations.

NEWTONS LAW OF COOLING

tut

Cloudy nights are warmer than clear

nights because clouds reflect the
radiations emitted by the earth at night
and keep it warm. Thus, clouds act as a
blanket.

ssc
ex

The fact that good reflectors are bad

absorbers and bad radiators is utilised
in making firemens helmets and metallic
tea-pots highly polished on the outside.

Water can absorb 90% of heat radiation,

which shows the importance of the
existence of water vapour in the
atmosphere. The water vapours in the
atmosphere protect the earth from the
more intense heat rays of the sun during
the days and from the extreme cold
during the nights. In very dry regions,
where there is little water vapour in the
air, the days are intensely hot and the
nights are extremely cold.
Gases are poor radiators of heat, hence
in the construction of furnaces, the
gases are made to fall on fire-bricks,
which radiate heat freely.

Because black bodies are the best

absorbers of heat radiations, a black
dress is uncomfortable during the hot
summer, while a white one is cool.

LAWS OF THERMODYNAMICS

First Law : The first law of

thermodynamics is a particular and more
rigorous statement of the principle of
conservation of energy. When a substance
absorbs an amount of heat at a constant
pressure, then part of this heat is used up
to raise the temperature which results in
the increase of internal energy. The rest of
the heat is used in doing work in allowing
the external pressure.
Second Law : It is impossible to
construct a device working in a cyclic
process whose sole effect is the transfer of
heat from a body at a lower temperature to
a body at a higher temperature OR it is
impossible to construct an engine working
on a cyclic process whose sole effect is the
conversion of all heat supplied to it in an
equivalent amount of work.
Entropy : It is a measure of randomness
or disorderness of a system. It is a thermal
property of a body which remains constant
during an adiabatic process.
Physics

[73]

THERMODYNAMIC PROCESS

or
.co
m

Third Law : At absolute zero (zero

Kelvin) temperature the total sum of
absolute entropy of a crystalline solid is
equal to zero.

Charles Law : The pressure remaining

constant, the volume of a given mass of
a gas is directly proportional to its
temperature in Kelvin scale i.e. V a T or
= constant; where V is volume & T is
temperature in Kelvin.

Isobaric Process : It involves constant

pressure

Isothermal Process : It involves

constant temperature. However, heat
changes.

P a T or

Adiabatic Process : It involves constant

heat. However, temperature changes.

Gay Lussacs Law : The volume

remaining constant, the pressure of a
given mass of a gas is directly
proportional to its temperature in
Kelvin i.e.

tut

Isochoric Process : It involves constant

volume.

ssc
ex

Melting process and boiling process are

common examples of an isothermal process
because they occur at constant
temperatures. Practically, a perfect
adiabatic process is impossible. However,
its approximate examples are (i) Sudden
bursting of the tube of a bicycle tyre (ii)
Propagation of sound in air. (iii) Expansion
of gas or vapour in a heat engine.

LAWS OF GASES

Boyles Law : For a given mass of a gas,

the volume is inversely proportional to
its pressure at a constant temperature.

If P = pressure and V = volume of a

given mass of a gas at a constant
temperature

then,

constant
or, P1V1=P2V2

Where P1 and P2 are initial and final

pressures and V1 and V2 are initial and
final volumes of a given mass of a gas at a
constant temperature.
[74]

General Science

= constant, where P is pressure

and T is temperature in Kelvin of a

given mass of gas at constant volume.

Ideal Gas Equation : It is also known

as standard or the perfect gas equation
which is given as
PV = nRT
where P = pressure, V = Volume, T =
temperature in Kelvin, n = number of
moles and R = universal gas constant.

KINETIC THEORY OF GASES

The Kinetic Theory of gases explains
the behaviour of gases. Basic features are:
(i) All gases are composed of molecules.
The molecules of a gas are alike and
differ from the molecules of other gases.
(ii) The molecules are extremely small point
masses, their dimensions being
negligible as compared to the distance
between them.

(v)

The pressure of the gas is equal to the

pressure exerted by the gas molecules
on the wall of container.

The kinetic theory of gases explains

most of the gas laws like Boyles law,
Charles law, ideal gas equation, etc.

TRIVIA

ssc
ex

The net change in the intermolecular

kinetic energy is determined by the temperature. This is in accordance with
the kinetic theory of gas. That is average kinetic energy associated with intermolecular forces is directly proportional to the temperature of the system.

The heat capacity or thermal capacity

depends on nature of the substance
(specific heat capacity) and mass or
quantity of matter of the body.
Thermodynamics deals with the conversion of heat into other forms of energy as well as the change in state (solid,
liquid, gas) of a system.
Random motion of the constituents of
the system involving exchange of energy due to mutual collisions is called
thermal motion.

When heat is absorbed by a body but its

temperature does not change, only the
intermolecular potential energy of the
system changes. This is the case with
melting and boiling.
Systems are in thermal equilibrium
when their temperature are same or
average kinetic energy per molecule is
same.
Internal energy consists of energy of
translational, rotational as well as vibrational motion of the molecules.

(vi) The gas-molecules are perfectly elastic

spheres and exert negligible force of
attraction or repulsion on each other
or on the wall of container.

or
.co
m

(iv) The
gas
molecules
collide
continuously against each other and
against the wall of container.

Total kinetic energy, or internal energy

or total energy does not determine the
direction of flow of heat. It is determined by the temperature alone.

tut

(iii) The molecules are continuously in

motion. They have different velocities
in different directions. The velocity of
gas molecules increases with
temperature.

The ratio of molar specific heat capacity depends on the molecular weight of
the substance. Because it depends on
mass of one mole which is turn depends on molecular weight.
The temperature, volume or pressure
of a system may remain constant when
it absorbs heat.
The temperature of the system may increase when heat is supplied to it or
work is done on the system.
Whole of the heat supplied can never
be converted into mechanical work.
This implies that the efficiency of heat
engine can never be equal to 100%.
Thermodynamics deals with the
interconversion of heat energy, internal
energy and mechanical energy or work.
The physics of heat engine is similar to
that of refrigerator.
Hydrogen cannot be used as a thermometric substance above 500C, because
it starts diffusing.
Physics

[75]

or
.co
m

drical bulb are more sensitive than those

with spherical bulb.

Below -200C, the hydrogen and nitrogen cannot be used because they start
liquifying. Therefore, helium gas is used
for temperature below - 200C.

Alcohol thermometer is preferred to the

mercury thermometer due to the larger
value of the coefficient of cubical expansion.

The platinum thermometer can measure temperature accurately upto 0.1C.

Following properties make mercury the

ideal thermometric substance.

The thermoelectric thermometers are

very sensitive and can be used to measure the temperature of insects.

(i) Does not stick to the glass walls.

(ii) It shines.

(iii) Coefficient of expansion is uniform.

(iv) Vapour pressure is low.

(v) Low thermal conductivity and

specific heat.

ssc
ex

Radiation Pyrometer : These are the

devices to measure the temperature by
measuring the intensity of radiations
received from the body. They are based
on the fact that the amount of radiations emitted from a body per unit area
per second is directly proportional to
the fourth power of temperature
(Stefans law). These can be used to
measure temperatures ranging from
800C to 4000C. They cannot measure
temperatures below 800C, because the
amount of radiations emitted from the
bodies is too small to be measured.

tut

Pure and dry gas should be used as

thermometric substance.

(vi) Available in pure form.

Gas thermometers have higher sensitivity than the mercury thermometers

because their coefficient of cubical expansion is much larger and same is for
all gases:
(i)

Celsius & Fahrenheit at - 40C = 40F.

(ii) Fahrenheit and Kelvin at 574.25F

= 574.25 K.

Magnetic Thermometer : The magnetic

thermometer is a device that uses adiabatic
demagnetisation for measuring the temperature. They can be used to measure
temperature very near to the absolute zero.

Sixs thermometer measures minimum

and maximum temperature during a
day. It uses mercury as well as alcohol
as the thermometric substance.

Vapour Pressure Thermometer : The

vapour pressure depends on the temperature alone and it is independent
of the nature of the vapours. This fact
can be used to measure the temperature. It can be used to measure
temperatues near absolute zero by
using different gases as the thermometric substances.

The mercury thermometer with cylin-

[76]

General Science

(iii) Fahrenheit and Reaumur at 25.6F = - 25.6R

(iv) Reaumur and Celsius at 0R = 0C
(v) At no temperature the Celsius scale
can have the same reading as the
Kelvin scale.

Let the reading on the faulty thermometer be f and the true treading be t, then

The clinical therometers read from 96F

to 110F.

Clinical thermometer are much shorter

than the laboratory thermometers because they are used to measure a limited range (96F to 110F) of temperature.

Specific Heat : It is the amount of heat

required to raise the temperature of unit
mass of substance through 1 degree. Its
dimensional formula is ML2T2q1. It
may be expressed in cal/gC, kcal/kgC.
BTU/lbF. J/kgk

Cal/gC = kcal/kgC = 4.2 103 j/

kgK.
Molar Specific Heat : The amount of
heat required to raise the temperature
of 1 mole of substance through 1 kg is
called molar specific heat. It is denoted
by C. Its unit is J/mol K. It is generally
used for gases.

Platinum resistance therometer can be

used to measure temperature inside a
motor engine.

4.2 J = 1 cal

tut

Thermo electric therometers can be used

to measure rapidly changing temperature.

or
.co
m

(iii) British Thermal Unit (BTU) : It is

the fps unit of heat = 252 cal =
amount of heat required to raise the
temperature of 1 lb of water through
1F.

Normal human temperature is 37C =

98.4F

The radiation therometers can measure

temperature from a distance.

ssc
ex

Adiabatic demagnetisation can be used

to meausre temperatures very near to
the absolute zero.
The degree Fahrenheit is the smallest
temperature range among all the scales
of temperature.
Heat : It is a form of energy. The SI unit of
heat is joule.

(i) Calorie : It is the amount of heat required to raise the temperature of 1g

of water through 1C. For international use the calorie is defined as
the amount of heat required to raise
the temperature of 1g of water from
14.5C to 15.5C. [This definition is
based on the average value of heat
required to raise the temperature of
1g of water from 0C to 100C per
C rise in temperature]
(ii) Kilocalorie (k.cal) = 1000 cal =
amount of heat required to raise the
temperature of 1 kg of water by 1C.

For the gases, molar specific heat is defined at constant volume (Cv) and at
constant pressure (CP). It is found that
CP - Cv = R. Where R is molar gas constant.
Thermal Capacity : It is the amount of
heat required to raise the temperature
of substance through 1C or 1K. Thermal capacity = mass specific heat.
The dimensional formula for thermal
capacity is ML2T2q1. Its unit is cal/C,
kcal/C, J/K.

Water Equivalent : It is the mass of

water that requires the same amount of
heat to raise its temperature through
1C as the substance requires to raise
its temperature through 1C. Its unit is
kilogram or gram. If m be the mass of
the body and c be its specific heat, then
water equivalent is given by W = mc.
Physics

[77]

or
.co
m

ssc
ex

tut

Principle of Calorimetry : The amount Latent heat is used for doing work in
increasing the distance between the molof heat gained or lost when its temecules during the change of state. That
perature rises or falls by Dq is given by :
is the latent heat increases the potential
Q = mc Dq, where m is the mass of the
energy of molecules and their kinetic
substance.
energy remains constant, therefore, the
According to the principle of calorimtemperature also remains constant.
etry, when two bodies exchange heat :
the heat lost = the heat gained. It is in Sublimation : Direct conversion of solid
to vapours is called sublimation.
accordance with the law of conservation of energy.
HoarFrost : Direct conversion of
vapours to solid is called hoarfrost.
Latent Heat : Heat required to change
the state (from solid to liquid or from
Melting : It is the process in which
liquid to gaseous, of one gram/kilosolid is converted into lqiuid. The regram of substance at constant temverse is called freezing or solidifcation.
perature is called latent heat (symbol
L). Its unit is cal/g, kcal/kg or J/kg. Boiling : It is the process of conversion
of liquid to gaseous state. The reverse is
The amount heat absorbed or given out
called condensation or liquefaction.
during the change of state is given by :
Q = ML, where M is the mass of the Melting and boiling occur at definite temperatures called melting point and boilsubstance.
ing or liquefaction.
Latent heat is of two types : (i) Latent
heat of fusion for change from solid to The liquids boils at a temperature, at
which its vapour pressure is equal to
liquid at the melting point and (ii) Lathe atmospheric pressure.
tent heat of vaporisation - for change of
sate from liquid to gaseous state.
Evaporation : Conversion of liquid into
gaseous state at all temperatures is called
evaporation. It is a phenomenon that
occurs at the surface of the liquid.

Latent heat of fusion of ice is 80 cal/g.

Latent heat of vaporisation for water is

535 cal/g

[78]

General Science

The rate of evaporation increases with

the rise in temperature.

tut

(5) They are composed of energy particles

called Photons. Every photon has a fixed
frequency which does not change when
a photon travels through different
media. The velocity of the photon
changes in different media due to
change in its wavelength. Photon is
electrically neutral does not have mass
at rest. In fact, a photon does not exist
at rest because a photon is an energy
particle of the E.M.W. which in turn is
a dynamic state of energy.

ssc
ex

An Electromagnetic radiation is an
electromagnetic wave (E.M.W.) that
consists of oscillating electric and magnetic
fields. An accelerated charge (e.g.
oscillating charge) produces an oscillating
electric as well as magnetic field in its
neighbourhood. These oscillating fields act
as sources for each other and thereby
produce each other. It results an E.M.W.
The accelerated charge reduces its energy
that appears as energy of E.M.W. The
electric-field, magnetic field and speed of
the E.M.W. are mutually perpendicular. It
gives transverse nature of the E.M.W. An
E.M.W. is associated with energy &
momentum. Hence, it exerts a pressure on
the surface of incidence.

or
.co
m

ELECTROMAGNETIC
RADIATION

BASIC FEATURES OF E.M.W.

(1) They are produced by accelerated or

oscillating charges.

(2) They do not require any material

medium for propagation.

(3) They travel in a freespace (vacuum or

air) with the speed of light i.e. 3X108
m/s because light is also an E.M.W.
When they travel through a medium,
their velocity depends entirely on the
electric and magnetic properties of the
medium.
(4) They are themselves uncharged and
hence, do not get deflected by external
applied electric and magnetic fields.

(6) The E.M.W. shows all wave phenomena

like light.

ELECTROMAGNETIC SPECTRUM
The orderly distribution of electromagnetic
radiations according to their wavelength or
frequency is called the electromagnetic
spectrum.
Only a small part of this spectrum is
visible to human eyes because the radiations
of this part produces sensations on the
retina of the eye.
(1) Gamma Rays: They are emitted by
radioactive nuclei. They have the shortest
wavelength and the highest frequency and
hence, the highest energy. The study of
-rays provides us with valuable
information about the structure of the
atomic nuclei.
(2) X-Rays: They are produced most
commonly when fast-moving electrons
Physics

[79]

or
.co
m

Electromagnatic Spectrum
S.No.

Name

Wavelength (in m.)

Frequency Range (in Hz) Source

1.
2.

Gamma rays
X-rays

61014 to 11011
11011 to 3108

51022 to 31019
31019 to 11016

Ultra-violet

61010 to 4107

51017 to 81014

Visible Light

4107 to 8107

81014 to 41014

Infra-Red

8107 to 3105

41014 to 11013

6.
7.

Heat-Radiation
Microwaves

105 to 101
103 to 0.3

31013 to 3109
31011 to 1109

Ultra-high frequency
(UHF)
Very High Frequency
(VHF)
Radio-Frequencies
Power frequencies

1101 to 1

10 to 104
5106 to 6106

3108 to 3107

Oscillating circuit

3107 to 3104
60 to 50

Oscillating circuit
Weak Radiations from
a.c. circuit.
The overlapping in certain parts of above E.M. Spectrums shows that the correponding radiations can be produced by
two methods.

10.
11.

1 to 10

tut

3109 to 3108

Nuclear origin
Sudden deceleration of
high energy electrons
Excitation of electrons, spark
and arc lamp.
Excitation of valence
electrons.
Excitation of atoms &
molecules
Hot bodies
Oscillating currents
in special vacuum tube.
Oscillating circuit

decelerate inside a metal target. They are

used for detecting explosives: opium,
jewelleries, etc. in the body of smugglers.

In Medical Diagnosis: e.g. for the detection of fractures, foreign bodies, like
bullets, diseased, organs and stones in
the human body.

for detecting pearls in oysters and defects in rubber tyres, gold and tennis
balls.

in engineering e.g. (a) for detecting

faults, cracks, flaws and holes in final
metal products (b) for the testing of
weldings, castings and moulds.

in radiotherapy to cure untraceable skin

diseases and malignant growths. The
photographic film containing the photographs of the body parts is as known
a Radiograph.

ssc
ex

[80]

General Science

(3) Ultraviolet Rays: They are produced

by the excitation of atoms, a spark and arc
lamp. The sunlight consists of ultraviolet
rays as a part. Ultraviolet rays are very
harmful to the living organisms. A long
and constant exposure of our body to these
radiations causes blindness and cancer. The
ozone layer in the upper atmosphere
absorbs most of the ultraviolet rays emitted
by the sun. Only a small fraction of these
rays reach the surface of the earth.
Therefore, the ozone layer protects the
organisms from the ultraviolet rays. A
welder wears coloured glasses to protect
his eyes, from the ultraviolet rays emitted
by the welding spark. During the solar
eclipse, the sun is completely covered by
the shadow of the moon. But the ultraviolet
rays emitted by it reach the earth. Hence,
the direct vision of the solar eclipse through
the naked eyes is avoided.
They are used: (i) to preserve food stuff
& making drinking water free from bacteria
as these rays kill bacteria & germs.

to study the structure of solids and molecules.

for sterilizing the surgical instruments.

for checking the mineral samples

through the property of ultraviolet
rays causing flourescence.

in burglar alarm.

in green houses to keep the plants warm,

in weather forecasting through infrared photography, and

in checking the purity of chemicals and

in the study of molecular structure by
taking infra-red absorption spectra,

(6) Heat Radiations: They

are
produced by any hot bodies. They are
used for heating purposes.
(7) Microwaves: They are produced by
oscillating electrical circuits. They are used:

in micro wave ovens.

in RADAR systems and in satellite communication.

(4) Visible Light: White-light emitted

by the sun is visible light. It is composed of
seven colours. Except the visible light, all
the remaining electromagnetic radiations
are invisible. Besides the solar-radiations,
there are a number of sources giving visible
light e.g. candle, electric-bulbs etc.

or
.co
m

to detect the invisible writings, forged

documents and finger- prints in forensic
laboratory.

tut

ssc
ex

(5) Infra-red rays: Infra-red rays are

emitted by the atoms and molecules of hotbody. Infra-red rays are absorbed by the
body on which they fall. So the body
becomes hot. Hence, infra-red rays are also
known as heat-radiations.
They are used:

to heat the interior of a car and house,

to cook food using a solar cooker,

to heat water using a solar water heater,

to treat muscular strains,

for drying wet clothes and grains after

harvesting,

in night vision devices during warfare

because infra-red rays can pass through
haze fog, smoke and mist,

to provide electrical energy to satellite

by using solar cells,

for producing dehydrated fruits,

for taking photographs during the conditions of fog, smoke, etc.

(8) UHF, VHF and Radiowaves : They

are produced by the oscillating circuits.
They are used as carrier waves during the
transmission of Radio-signals, TV-signals,
FM-Radios, etc.
(9) Power- frequencies or Power
Waves : They are produced from a.c.
circuits. They are used for lightning.

RADIATION IN ATMOSPHERE
The main source of radiations in the
atmosphere is the sun. Visible light is
weakly absorbed whereas most of the infrared raditations are absorbed by the
atmosphere and is used to heat it. The
ozone layer of atmosphere absorbs most of
the ultraviolet-rays and thus protects us
from their harmful effects. The ozone layer
converts the ultraviolet radiations to infrared which is used to heat the atmosphere
and the earths surface. It is suspected that
ozone layer is slowly being depleted and
this is causing great concern to scientists
and environmentalists.
Physics

[81]

or
.co
m

Cathode rays consisting of electrons,

are produced in the discharge tube at a
pressure of 0.01 mm of mercury.

ELECTRONIC EMISSION

The phenomenon of emission of

electrons from the surface of a metal is
called electronic emission.
(a) Thermionic Emission: It involves
emission of electrons due to appropriate
heating of the metal surface. The devices
like diode valve and triode valve are based
on the thermionic emission of electrons.
The diode valve is used as rectifier and
triode valve is used as transistor and
amplifier in electrical circuits.

The upper part of the atmosphere of

the earth receives about 1.36 kilo joule of
energy per second per unit area from the
sun. The earths surface receives 47% of
this energy emitted from the sun. The
energy crisis can be overcome by harnessing
this energy. A large number of devices have
been developed to harness the solar energy
directly. The commonly used devices are:
Solar cookers, solar furnaces, solar water
heaters, solar power plants, solar-cells etc.

The discharge tube phenomenon is used

in making sodium lamps, mercury vapour
lamps, fluorescent tubes, neon signs, flood
light, etc.

tut

The earth gets heated by absorbing heat

from the sun & radiated energy mostly in
the infra-red region. Low lying clouds and
the atmosphere prevent these infra-red
radiations of earth from passing through
them and thus serve to keep earths surface
warm at night. This phenomenon is called
as Green House Effect.

All of the above devices are pollutionfree and most of them are economical.

ssc
ex

Limitations in harnessing solar energy

are--(i) Solar energy reaching the earth is highly
diffused and scattered. Hence, it is not
able to perform much useful work.

(b) Photoelectric Emission: It involves

emission of electrons from the metal surface
due to incidence of light of a suitable frequency.
It is also known as photoelectric effect.

(ii) It is not available at all places and at all

times.

PHOTOELECTRIC CELLS OR
PHOTO CELLS

ELECTRIC DISCHARGE
THROUGH GASES

They convert light energy into electrical

energy. They are based on the phenomenon
of photoelectric-emission. They are also
known as Electric-eyes. A photo-cell
converts a change in intensity of
illumination into a change in the photo
current obtained. This current is used to
operate control systems and in light
measuring devices.

At normal pressure gases are insulators

but at very low pressure they can allow the
flow of electric current due to an applied
potential difference. The electric-discharge
through a gas is carried out in discharge
tube. The discharge tube involves the
ionisation of gas which gives rise to different
coloured discharges and finally, the cathode
rays are produced depending upon the
value of pressure inside the tube.
[82]

General Science

Applications of Photo-cells:

in TV camera for telecasting scenes and

in photo-telegraphy.

in photometry to compare the illuminating powers of two sources.

in industries for locating small flaws or

holes in metallic sheets.

as photoelectric sorters; to sort out the

materials of different shades.

to determine the opacity of solids and

liquids.

to control the temperature and chemical reactions.

or
.co
m

Dual Nature of Matter: Microscopic

particles like electrons have mass character as
well as wave character. The nature of a particle
to behave as a mass as well as a wave is known
as dual nature of matter. Electron-microscope
is the device that exploits the wave-nature of
electrons to provide high resolving power.It
has successfully been employed to investigate
structural details of bacteria, viruses, etc. It has
proved to be a powerful tool of investigation
for research in science, technology, metallurgy,
industry, medicine, etc.

tut

to switch on and off the street lightning

system at dusk and dawn, without any
manual attention.

X-RAYS

When highly energetic electrons are

made to strike a metal target of high atomic
number like Tungsten and Platinum, the xrays are emitted.

METALS SHOWING THE

PHOTOELECTRIC EMISSION

Alkali Metals: Lithium, sodium,

potassium, cesium, etc. show the
photoelectric effect with visible light.

ssc
ex

In the photoelectric effect, one photon

incident on the metal-surface causes the
emission of one electron called photo
electron. Higher the intensity of light, more
is the no. of photons incident and hence,
more is the no. of photoelectrons emitted.
Higher the frequency of the photon incident,
higher is the kinetic energy of the photo
electron emitted. The photoelectric effect
shows the particle nature of light i.e. light is
composed of energy-particles called photons.

The particle nature is given as

E = mc2 where E = energy, m = mass &

c= speed of photons.
The wave-nature is given as

E = hv, where E = energy and v=

frequency of photon h = Plancks constant
Photons are electrically neutral and
have zero rest mass.

The device used to produce x-rays is

known as an x-rays tube or Coolidge tube.
X-rays are electromagnetic waves. They
can affect a photographic plate more
strongly than visible light. They cause
fluorescence when incident on certain
materials as barium platinocyanide. X-rays
can ionise the gas.
They can pass through small thicknesses
of aluminium, woods, plastics, human-flesh
etc. They are stopped by materials of high
density and high atomic number. Hence, xrays machines are used to inspect luggages
at the custom, security gates, airports, etc.
The frequent and excess exposure of x-rays
may cause diseases like genetic-disorders;
cancer, etc. The screen of Computer, TV,
oscilloscopes, etc. are using a cathode-ray
tube in which a highly accelerated electrons
strike the screen. It results in a small amount
of x-rays. Hence, their screens are designed
to absorb the x-rays.

Physics

[83]

or
.co
m

ATOMIC PHYSICS

tut

Hence, the size of the nucleus increases

with increase in the mass number.

NUCLEAR STABILITY

It depends upon the nuclear size and

neutron: proton ratio. As the nuclear radius
increases, nuclear stability decreases. Higher
the n/p ratio of a nucleus lower is its
stability. From Hydrogen (Atomic No=1)
to Bismuth (20983Bi - At .No. 83 & Mass No.
= 209) all nuclei are quite stable except
Technetium (43Tc) and Promethium (61 Pm).

Every atom is composed of three kinds

of fundamental particles viz. Electrons,
Protons and Neutrons. Protons and
Neutrons are in the atomic nucleus while
electrons revolve around the nucleus in
definite circular path called orbits.
Electrons are negative and have a definite
energy in a definite orbit. Protons are
positive while neutrons are neutral.

ssc
ex

When an electron changes its orbit, an

amount of energy is exchanged (lost or
gained) in the form of radiations (infrared, visible, ultraviolet and even x-rays).
Every atom has an equal no. of electrons
and protons and hence, an atom is neutral.
The no. of protons in an atom is equal to its
atomic number. The sum of the no. of
protons and neutrons is equal to the mass
number.

However, from atomic number 84

(Polonium -Po) to 92 (Uranium -U) are
natural radioactive nuclei. Due to
radioactivity, their nuclei disintegrate
spontaneously. The nuclei of the elements
Neptunium (93 Np) onwards are artificial
and do not exist in free state in nature.
The force of attraction responsible for
binding the nucleons (protons, neutrons
etc.) in the nucleus is nuclear force. As the
nuclear size increases the nuclear force of
attraction decreases. The nuclear force is
the strongest force in nature.

The electron in the orbit closest to the

nucleus has least energy and as the orbit
number increases away from the nucleus,
energy of the electrons also increases.

The total sum of masses of individual

nuclear particles (Nucleons) in a nucleus is
greater than the rest of the actual rest mass
of the nucleus. Their difference is known
as mass defect. This mass defect gets
converted into energy which is called
Nuclear-binding energy.

The size of the nucleus is much smaller

than that of the atom. The concept of
nucleus, nuclear and atomic size were
given by Rutherford. The concept of orbits
and energy of an electron in its orbit were
given by Neil Bohr. The motion of an
electron in its orbit is similar to that of a
planet moving round the sun.

Every nucleus of the atom has neutrons

and protons. The volume of the nucleus is
directly proportional to its mass number.
[84]

General Science

MASS DEFECT

. Bi = Bismuth, 83 = Atomic no.

e.g.
= No. of proton

209 - 83 = 126 = No. of neutrons.

Isotopes: They are a group of nuclides
having equal no. of protons.

Isobars: They are a group of nuclides

having equal mass no.

Isotones: They are a group of nuclides

having equal no. of neutrons.

ssc
ex

The property by virtue of which a heavy

nucleus of element disintegrates itself
without being forced by any external agent
to do so, is termed as radioactivity. The
phenomenon of radioactivity is quite
natural and can not be stopped. It was
discovered by Henry Becquerel in 1896.
The radioactivity results in the
conversion of an unstable larger nucleus
into smaller stable nucleus along with the
emission of certain radioactive decays. These
radioactive decays are alpha rays, beta rays
& gamma rays. During every radioactive
decay an amount of energy is released.

1 Becquerel (Bq) =1 decay/ second

1 Curie (Ci) = 3.7x 10 10 decays /second

HALF- LIFE TIME (T)

The time period during which half of

the total initial number of radioactive atoms
decays, is called as half-life time.

When a nucleus emits an alpha-particle,

the daughter nucleus has atomic number
lesser by 2 units and mass number lesser by
4- units.

Units of Radioactivity:

1 Rutherford (Rd) = 10 6 decays/second

209 = Mass No. = Z+N = A

RADIOACTIVITY

or
.co
m

symbolised as
where X= chemical
symbol of the species, Z= Atomic number=
Number of proton = Number of electrons,
A = Mass number = Sum of number of
protons and neutrons, A-Z= Number of
neutrons (N).

When a nucleus emits a beta-particle,

the mass number of the daughter nucleus
remains unchanged but its atomic number
increases by one unit. There is no effect on
the atomic and mass number due to gamaemission.

tut

Nuclear species called Nuclides are

e.g. for

= T= 5770 years.

for Polonium, T= 3x10-7 sec.

Half-life time (T) is given as:

(where l = decay constant)

Average life time of a radioactive
substance is given as = 1.44 T, where T
= half life.
The full-life time of a radioactive
substance is infinity i.e. the taken initial
sample of a radioactive sample decreases in
amount with time but never becomes zero.
Besides -, - &, - particles, some
other subnuclear particles like positrons,
neutrinos, antineutrino etc. are also emitted
during the radioactive decays. Positron is
an antiparticle of electron i.e. it has mass
equal to electron but is equally positively
charged. It is also known as positive particle. Symbols used for position,
neutrino and anti-neutrino are
respectively. Nuclear changes during the
radioactive decays:
Physics

[85]

(2) decay

Thorium Protactinium + b-particle +

Energy
(3) decay
Sodium Magnesium + - particle +
gamma-particle.

e.g. Boron, when bombarded by particle, continue to disintegrate further even

after the bombardment is stopped, as follows :
Boron + a particle Nitrogen - 14
Produced is a
Nitrogen -13 + Neutron.
radioactive nucleus produced by artificial
radioactivity. Its half-life is 11 minutes.

ARTIFICIAL & INDUCED

RADIOACTIVITY

or
.co
m

Uranium Thorium + -particle +

Energy

Generally, such disintegration stops as

soon as the bombardment is over. However,
if the bombarded nucleus keeps on
disintegrating even after the bombardment
is stopped, the phenomenon is called
induced radioactivity.

tut

(1) a decay

The phenomenon of disintegration of

otherwise stable nuclei by bombarding
them with suitable projectiles is called
artificial radioactivity.

Nitrogen Carbon - 13 + positron.

ABC OF RADIATION
1. Similar to
2. Symbols
3. Atomic No.
4. Mass No.
5. Speed

7.
8.
9.

10.

2
4
1.4107 m/s
to 2.1107m/s
Penetrating power
Least and can be stopped
by 0.02 mm thick
aluminium sheet.
Ionising power
Maximum due to
maximum charge (+)2
unit & maximum mass
Range in air
Depends upon the radio
active source and varies
from 3 to 8 cm.
Effect on photographic Produce smaller effect
plate
Flourescence effect Produce flouresence in
in some substance like
barium-plantinocyanide
and zinc sulphide
Effect of electric and Show deflection
magnetic field
Effect on human body Cause burning effect

11.

12.

-rays
Helium nuclei

ssc
ex

Properties

[86]

General Science

-rays
Electrons

-rays
E.M. Waves like X-rays

1
0
33% to 99% of the
light
Higher and can pass
through a few mm
thick alumium sheet
Intermediate
that of between
a & g rays
Several meters

0
0
Equal to the speed of
light
Highest & can pass
through several cms
thicks iron & lead slabs.
Minium due to
zero charge

More effect

Maximum effect

Also produce flouresence in barium

plantinocyanide and
zinc suplide
Show deflection

Produce flouresence
in some substances like
willimite

Can cause a shock

on longer exposure.

Very long

do not show deflection

Can cause cancer

It involves the transformation of a stable

nucleus into another nucleus by
bombarding the former with suitable
particles. These particles are called
projectiles e.g. neutron, proton, electron,
alpha-particle, -ray etc. Neutron due to
mass and Zero charge is the best projectile.

energy is released only in about 109 seconds.

This released energy appears in the form of
-rays, kinetic energy of nuclei of Barium
(Ba), Krypton (Kr) & neutrons (n).

e.g.

Nitrogen - 14 + - particle Oxygen 17 + Proton

Nuclear Chain Reaction : In a nuclear

fission of Uranium three secondary
neutrons are released along with a huge
amount of energy. These three neutrons
cause the fission of other three
Uranium-235 nuclei & produce 9neutrons which in turn, can bring about
the fission of 9-Uranium -235 nuclei &
so on. This process multiplies so quickly
(i.e. a few micro-seconds) that a
tremendous energy is released in a
fraction of time. Such a continuous
process is known as Chain Reaction. If
the chain reaction is controlled the
energy released is used for peaceful
purposes like in Nuclear Reactor or
Nuclear-pile. If the chain-reaction is
uncontrolled, the tremendous energy
released brings about a disastrous effect
like Atom-Bomb.

tut

Representation of a nuclear reaction.

Target Nucleus +Projectile Daughter
Nucleus + Emitted - Particle

or
.co
m

NUCLEAR REACTION

Above reaction is the 1st artificial

nuclear transmutation discovered by
Rutherford in 1919.

ssc
ex

A nuclear reaction may be of two types

viz. Nuclear Fission and Nuclear Fusion.
I. Nuclear Fission

The process of splitting a heavy nucleus

(usually of atomic mass >230) into two
comparatively small nuclei of middle weight
along with the release of very large amount
of energy is called nuclear fission.

In this process, a fraction of mass

disappears that appears in the form of
energy released.

Otto Hahn & Strassman discovered that

when Uranium -235 isotope (
) is
bombarded with thermal neutron, it splits
up into two smaller nuclei with the emission
of 3 neutrons along with 200.4 Mev of
energy per fission.The neutrons produced
after fission are called secondary neutrons.
Such a huge amount (200.4 Mev) of

Controlled Chain Reaction: If only one

neutron, out of 3- neutrons released in
every fission of Uranium, is used to cause
further nuclear fission, the constant
amount of energy is released. Such a
nuclear fission is known as controlled
nuclear fission or controlled chain
reaction. The secondary neutrons
released are fast moving neutrons
whereas to have a controlled chain
reaction the slow moving neutrons
called Thermal neutrons are required.
Hence to achieve a controlled chain
reaction the fast moving neutrons have
to be slowed down and the surplus
neutrons have to be absorbed. The fast
moving neutrons are slowed down by
Physics

[87]

Nuclear Reactor : It converts nuclear

energy into heat. It is based on
controlled nuclear fission.

Fuel: A fissionable material is used as a

(Plutonium), etc.
fuel. e.g.
Commonly is used as a fuel.

(d) to produce neutron beam of high intensity which is used in the treatment of
cancer and nuclear research.
Indian Nuclear Reactors

Our country has adopted a three- stage

strategy of nuclear power generation :
(a) The first stage aims in the use of natural
uranium as a fuel, with heavy water as
moderator.
(b) The second stage involves the development of the fast breeder reactors. For
this, the discharged fuel from the reactors is reprocessed to obtain plutonium239, which is further used for the fast
breeder reactors.

Coolant: It is used to absorb the heat

produced in the reactor core. e.g. water
and heavy water are used as Coolants at
ordinary temparature but at high
temperature, generally liquid sodium is
used as a coolant.

or
.co
m

(c) to produce radioactive isotopes. These

isotopes are used in medical science,
industry and agricultural research.

tut

a substance called a Moderator e.g.

graphite, deutrium or heavy water. The
number of neutrons released is reduced
by Control Rods e.g. Boron - rods or
Cadmium rods.

Shield: The whole reactor is protected

with a concrete wall; so that radiations
emitted can be stopped.

ssc
ex

Moderators
&
Control-rods:
Moderators are around the core of the
reactor. Control - rods are inserted inside
the core of the reactor.

Fast Breeder Reactors: Out of the total

Uranium available in nature only 2% part
is fissionable 235 U & 98% part is nonfissionable 238U. In the fast breeder nuclear
reactor, 238 U is first converted into
fissionable 235U which is further broken
down and the nuclear fission reaction
proceeds as follows:

Use of Nuclear Reactors:

(a) in electrical power production
(b) for the propulsion of ships, submarines
and air crafts.
[88]

General Science

(c) The third stage involves using fast

breeder reactors to produce missile U233 from Th -232 & to build power
reactors based on them. India is currently, well into the second stage of the
programme and considerable work has
also been done on the third stage (i.e.
the utilization of Th -232).
Earlier reactors developed in India were
Apsara (first) and CIRUS (Canada India
Reactor). They used natural uranium as
fuel and heavy water as moderator. Besides
these research reactors,
EERLINA,
PURNIMA (I, II & III), DHRUVA and
KAMINI have been subsequently
commissioned as research reactors.
KAMINI is the countrys first large research
reactor that uses U-233 as fuel.
India gets most of its Uranium from the
Jadugura mines in Jharkhand. The Uranium
obtained from these mines is taken to the

The nuclear radiations cause pollution

at three stages:

The dose of radioactive (nuclear)

radiations is measured in a unit called
Roentgen(R). The quantity of radiations
that produces 1.61x1012 pairs of ions in 1
gm of air is equal to one Roentgen(R). In
practice, milliroentgen is used as the
exposure unit or dosage unit. The radiation
absorbed per second is called dose rate or
exposure rate or radiation absorbed dose.

(a) When nuclear fuel is mined, processed

and enriched, it constantly emits nuclear
radiations.

or
.co
m

Nuclear Hazards

The Nuclear radiations incident on the

organisms cause the ionisation of atoms
and molecules resulting in the
decomposition of the complex organic
molecules in the body of the organisms.
Consequently the normal functioning of
the biological system becomes disrupted.
The damaging effect of the nuclear
radiations would depend upon - (i) dose of
radiations, (ii) rate of dose given, and (iii)
nature of the organism exposed.

tut

Nuclear Fuel complex situated at

Hyderabad for processing. At this complex,
the fuel elements are formed after enriching
the Uranium. These processed fuel elements
are then supplied to different nuclear plants
as situated, at Kota in Rajasthan, Narora in
U.P., Tarapur in Maharastra and
Kalpakkam in Tamil Nadu.

ssc
ex

(b) Accident can be caused due to leakage

of nuclear reactions from reactors. Sometimes the nuclear reactor core may get
faults resulting in vast radiations. Such
accidents have already been occurred,
one in USA at Three Mill Island and
other at Chernobyl in Ukraine.
(c) Disposal of nuclear waste - It is a big
problem and it can not be thrown anywhere. These waste materials contain
radioactive substance which radiate radioactive rays. At presently, the nuclear
waste is sealed in the thick stainless
steel vessels and is dumped deep into
the earth.
Harmful effects of the nuclear
radiations:

(a) They can change or damage the structure of cells in the human body.

(b) They cause diseases like cancer, leukemia and blindness.

(c) They cause genetic disorder in a human body.

(d) They can cause sterility in the young
generation.

The safe limit of exposure to radiation

over the entire body is 250 milliroentgen
(mR) per week. This is known as Permissible
dose. Cancer may be caused at a dose rate
of 100R. Death of an organism is possible if
this dose exceeds 600R.
II. Nuclear Fusion

The phenomenon of combining two or

more lighter nuclei to form a single heavy
nucleus is called nuclear fusion. It results
in the release of tremendous amount of
energy. It requires very hight temperature
(107K) & pressure which are not possible
on earth. Such conditions are available in
stars & hence, the nuclear fusion is a stellar
phenomenon. It is the cause behind the
stellar energy. In the biggest star i.e. sun,
the nuclei of hydrogen fuse together to
produce helium nucleus and a tremendous
amount of energy.

Physics

[89]

In discovery of new radioactive and

non-radioactive isotopes of elements.

In the radio-active and nuclear research.

In agriculture- by using the tracer-technique the fertilizer consumption of

plants can be measured by the help of
Geiger-Muller Counter (GM Counter).
G M Counter can detect the presence of
a radioactive isotope and can measure
its activity.

In industry- The tracer technique can

be applied by using a radioactive isotope to study the wear of auto mobileengines.
In medical science- by using the radioactive isotope of Iodine by the help of
tracer technique, the position of goitre
can be detected.

ssc
ex

or
.co
m

In discovery of new sub-nuclear particles.

TRIVIA

In photoelectrical effect, the electron is

assumed to be bound. That is, the energy of the incident photon is of the
order of the binding energy of the electron.

In Compton effect, the electron is assumed to be free. That is, the energy of
the incident photon is much larger than
the binding energy of the electron.

brought together in less than a

microsecond. It results in a violent explosion
causing destruction because the combined
mass becomes super critical. At the critical
mass of a radioactive sample, a controlled
chain reaction occurs.

tut

APPLICATION OF RADIOACTIVE
ISOTOPES

In carbon dating- It involes the determination of age of fossils by measuring

the radioactive isotope of Carbon - 14.

In Radio dating - The age of old rocks

is determined by measuring the radioactive materials e.g. Uranium present
in the rocks.

The last two applications given above

are based on the half-life period of C-14
and Uranium. The half-life of C-14 is
approx. 5770 years.

Einstein was awarded Nobel Prize for

explaining the photoelectric effect.

Photoelectric effect was discovered by

Hallwach.

The kinetic energy of photelectrons varies from zero to h (v v0).

Einsteins photoelectric equation is in

accordance with the law of conservation of energy.

Cesium is the best photosensitive metal.

The hardness of the X-rays depends on

the accelerating potential of the electrons incident on the target.

Voltage applied across the X-ray tube is

of the order of 10000 V.

The atomic number of the target determines the hardness of X-rays.

Mosley related the frequency of characteristic X-rays to the atomic number

of the target.

ATOMIC BOMB

It involves uncontrolled nuclear chain

reaction (fission). In an atom bomb two
subcritical masses of U-235 or Pu - 239 are
[90]

General Science

Frequency of -rays is greater than that of

X-rays.

Efficiency of production fo X-rays is less

than 1%.

The target in the X-ray tube should have

high atomic weight and high melting
point.
Absorption coefficient of X-rays is highest for lead.

Hydrogen atom cannot emit X-rays.

Compton effect is observed with X-rays

and -rays.

Electron microscope works on the wave

nature of moving electrons.

Wavelength of the matter waves does

not depend on the charge of the particle.

Bohrs theory is applicable to both the

hydrogen as well as hydrogen like atoms.

As the quantum number increase the

difference of energies between the consecutive energy levels decreases.
In the Bohr model of the atom, an electron can revolve around the nucleus in
a stable orbit without emitting radiations of its orbit has whole number of
de Broglie waves.

ssc
ex

Observation of faint spectral line very

near to blue line of hydrogen spectrum
lead to the discovery of deutrium.

Total energy of the orbital electron is

negative.

Lead is the heaviest atom which is radioactively stable.

All naturally occuring radioactive substances are finally converted into lead.

For radioactive nuclei :

where n = number of neutrons and p =

number of protons.

The quantisation of the enegy states of

an atom was demonstrated by Frank
Hertz experiment. The experiment demonstrated the existence of discrete energy levels in the atom.

or
.co
m

Production of X-rays is an atomic phenomenon and the production of -rays

is a nuclear phenomenon.

tut

Iron, nickle, cobalt, etc. has ferromagnetic properties due to partially filled
inner subshells.

The binding energy of the electron in

the ground state of hydrogen is called
rydberg, 1 rydberg = 13.6 eV.

The isotope 1H3 of hydrogen is unstable

and decays to 2He3.

Radium was isolated by Pierre Curie

and Madma Curie.

Out of electron, proton and neutron,

only neutron is unstable in free space.
It decays into a proton and an electron.

When -particle is emitted the parent

and daughter products are isobar.

Half life period of lead is infinite.

Artificial radioactivity was discovered

by Henry Becquerel.

Natural radioactivity was discovered

by Henry Becquerel.

In free space, the neutron decays as :

Probability of a radioactive atom to survive

n times longer than the half life is : 2n.
Physics

[91]

The first nuclear transmutation was

achieved by Rutherford.

In the nuclear reactions, mass + energy

is conserved.

The decay constant as well as half life

period are independent of the age of
the radioactive sample.

or
.co
m

The radioactive decay rate is not affected by temperature or pressure.

Critical mass of fissionable uranium

235 can be reduced by surrounding it
with neutron reflecting substances.

The decay of artificial radioactive isotopes is accompanied by positron decay.

In the fission of 92U235 energy released is

200 MeV.

tut

The radioactive substances are stored

in lead containers, because lead absorbs
the radioactive radiations.

Enriched uranium is better fuel for the

reactor because it has greater proportion of U-235.

The moderator of the nuclear reactor

should slow the neutrons without absorbing them.

The percentage of mass which changes

into energy during fusion is of the order of 0.7%.

In the sun and stars, the energy is

released through natural fusion of
hydrogen into helium with carbon
serving as nuclear catalyst.

In the fission of uranium, the percentage of mass converted into energy is

about 0.1%.

197

Protons attract each other when they

are separated by a distance of 1014m.

A neutron can be added to or taken out

of the nucleus of an atom without
changing its chemical properties.

Nuclear fusion requires very high temperature.

Energy released in nuclear fission mostly

appears as kinetic energy of the fission
fragments.

U238 can be fissioned by fast neutrons

and 92U235 is fissioned by slow neutrons.

The mass of the sun is decreasing at the

rate of 4 109 kg per second.

Nuclear fission was discovered by Hahn

and Strasman.

Mass number of nuclei is either equal

or more than the atomic number.

Positron was discovered by Anderson.

First atomic bomb was designed by E.

Teller.

Man made element produced in the

first nuclear reactor was plutonium.

ssc
ex

To photograph the brain tumour, Hg

radio isotope is generally used.

The neutrino has no charge and negligible mass.

Both photon and neutrino are chargeless

and have negligible mass. But the spin
of photon is 1 and that of neutrino is
.

Proton was discovered through artifical

disintegeration of nitrogen by =particles as follows :

[92]

General Science

or
.co
m

Sound waves after being converted into

electrical waves are not transmitted as
such because they are heavily absorbed
by the atmosphere.

Artificial transmutation of elements was

discovered by Rutherford.

For full wave rectifier, the minimum

number of diodes required is two.

Enriched uranium is that in which the

percentage of U-235 is more than 0.7%.

Both n as well as p type semiconductors are neutral.

The fissionable material used in the

atom bomb dropped on Nagasaki in
1945 was Plutonium.

The output of rectifier is DC mixed with

AC.

Plutonium - 239 is the best nuclear fuel.

First atomic reactor was designed by

Enrico Fermi.

Thermal neutrons have kinetic energy

of the order of other gas molecules in
their surrounding.

The resistance of intrinsic semiconductor decreases with the increase in temperature.

Diode was discovered by Fleming.

tut

The density of nucleus is of the order

of 1017 kg/m3.

The thickness of pn junction is of the

order of 106 cm.

The production of electromagnetic

waves by an oscillating charge was predicted by Maxwell.

Thermionic emission was discovered by

Thomas Alva Edison.

ssc
ex

Physics

[93]

or
.co
m

ASTRONOMY

SOLAR SYSTEM

tut

The sun has its own family, known as

the Solar System. Solar system consists of
the sun, its nine planets and other heavenly
bodies like asteroids, satellites (Moons),
comets, meteors, etc.
The sun is at the centre and all other
members of system move around it in
elliptical orbits due to the gravitational force
of attraction between them.

The branch of science which deals with

the study of position, composition, motion
and other related facts of the heavenly
bodies, is called astronomy. The source of
information about the heavenly bodies is
electro magnetic waves radiated from
them. It includes the two windows of the
astronomy viz.
(i) Optical Window of Astronomy: It
involves the study of the heavenly bodies
through visible radiations by the help of
optical telescope.

ssc
ex

(ii) Radio Window of Astronomy: It

involves the study of the heavenly bodies
through radiowaves by the help of radiotelescope.

ASTRONOMICAL UNITS OF
DISTANCE

(i) Light Year (ly):- It is equal to the

distance travelled by light in vacuum in
one year. 1ly = 9.46 1015m
(ii) Parsec (Parallactic Seconds):-

1 parsec = 3.1 1016m

(iii)Astronomical unit (Au):- It is equal to

the distance between the earth and the
sun.

1A.U = 1.5 1011m

The universe is the limitless expanse of

space around us consisting of the solar
system, stars, galaxies, etc.
[94]

General Science

Sun

It is the nearest star to us. It is heaviest

and largest member of the solar-system. Its
mass is 1.98x 1030 kg and diameter is 1.392
x 10 9 m. It is about 109 times the diameter
of the earth. It rotates about its axis and
completes one rotation in 25 days. Our sun
is also called Yellow dwarf star. It emits
continuously the electromagnetic radiations
both in visible and in radiowaves regions.
The sun consists of a bright layer at the
centre called Photosphere that emits light.
The photosphere is surrounded by a hotgaseous layers called the chromosphere.
The sun comprises different elements in
gaseous state. Hydrogen - 70%, Helium 28%, other heavier elements Lithium to
Uranium - 2%. The temperature, density and
pressure increase from the surface to the
centre of the sun. Temperature increases from
6000K on the surface to 14x106 k at the
centre and density increases from 104 kg/
m3 at the surface to 104 kg/m2 at the centre.

There are eight planets in the solar

system. These planets are revolving around
the sun in elliptical path. They do not emit
their own light but reflect some of the
incident light of the sun. These planets in
the order of increasing distance from the
sun are: Mercury, Venus, Earth, Mars,
Jupiter, Saturn, Uranus and Neptune. Until
recently Pluto was recognised as the ninth
planet. However, Neptune and Pluto keep
on exchanging their distance in their
elliptical orbits in such a way that
sometimes Neptune is the farthest and
sometimes Pluto.
The mass of the earth is about 6x1024
kg. The planets Venus and Uranus rotate
about their axis from the east to the west
whereas all the other planets rotate from
the west to the east. Venus and Uranus are
called retrograde.

Solar constant = 1388 Watt/m2 = 2 cal/

(cm2 - minute).

or
.co
m

Solar Constant(S): The amount of

radiant energy received per second per unit
area of a perfectly black body surface at
right angles to the direction of the sun-rays
at the mean distance of the earth from the
sun is known as the solar constant.

Planets

tut

Source of solar energy is due to energy

released during the nuclear fusion. It involves
the conversion of a certain mass into energy.
The sun has been continously radiating energy
at the rate of 46x1026 Joules per second for
the last several billion years without getting
cooler. The light emitted from the sun reaches
the earth in 8.3 minutes.

ssc
ex

Sun-Spots: Certain dark spots are

observed in the photographs of the visible
light disc of the sun. These dark-spots are
called sun-spots. They have relatively lower
temperature (4500K) at the sun- surface.
Their numbers vary with time. The
maximum sun spots activity occur
regularly after every eleven years. This
period is known as the sun-spot cycle. The
sun-spots are also associated with high
magnetic fields (2000 to 3000 gause).

Solar Flares: At the time of the

maximum sun-spot activity, some portions
near the sunspots sometimes suddenly
become much brighter than the usual. Such
regions are called Solar Flares. These sunflares emit protons, electrons and particles. It results a lot of magnetic and
radio disturbances all over the earth. It
also affects the plant growth.

Solar Wind: The out flow of materials

as charged particles e.g. electrons and
protons, etc. from the sun is called as solar
wind. It results in emission of one million
tonne particles per second from the sun.

(1) Mercury: It is the hottest, the

smallest and the nearest to the sun amongst
all planets. It is seen just before the sun
rise, and after the sun-set. Its atmosphere
contains H, He, Ar and Ne-gases. The
temperature of its sun-facing side is 427 C
and the opposite dark side is at -270 C. It
does not have favourable temperature,
oxygen and water for the existence of life.
Because it reflects 76% of the sunlight
falling on it. Its atmosphere contains 95 to
97% CO2 and small quantities of N2, Ar,
SO2, CO & water vapour. Its temperature
is 480C and pressure is very high. Hence,
life is not possible on it. It is seen 3 hrs
before the sun-rise and 3 hrs after the
sunset. Hence, it is known as Morning/
Evening star.
(3) Earth: It is one of the unique planets
having life. Its atmosphere contains 78% of
Physics

[95]

or
.co
m

(6) Saturn: It is the second largest planet.

It consists of H2 and He with traces of NH3
and methane (CH4). It is recognised by a
system of revolving rings around it. The
rings have dust particles and ice. Its
temperature is about (-) 180C. The largest
satellite is Titan (diameter = 5800 km).

N2, 21% of O2 and traces of He, Ne, Kr,

CO2 and water vapour. 71% surface of its
is covered with water. Moon is its natural
satellite.
(4) Mars: Its very thin layer of
atmosphere contains 95% CO2, 2.7% N 2,
1.6% Ar and traces of O2, CO and other
gases. Its surface has craters of different
sizes. It is also known as Red - Planet
because it appears red owing to the present
of iron- oxide upto 16% of its soil. Its daytemperature ranges from 21C to 27C but
at night it becomes (-) 84C. Phobos
(diameter =27 km) and Deimos (diameter
= 14 km) are its two satellites.

tut

(8) Neptune: It is the 8th planet of the

sun. It has six satellites.
Its surface has frozen methane (CH4). Its
orbit crosses the orbit of Neptune. Its single
discovered satellite is Charon. It was treated
as the coldest and lightest planet of the sun.

(5) Jupiter: It is the largest planet. It is a

spinning ball of gases and liquids like
ammonia, hydrogen (NH3,H2) and helium
He with no solid surface. Its temparature is
about (-) 140C. No life is possible on it due
to ammonia clouds and intense emission of
radio wave on it.

(7) Uranus: It is made up of H2, He,

NH3 and CH4. It appears green due to the
large amount of CH4 and NH3 clouds in its
atmosphere. Its temperature is about (-)
127C.

ssc
ex

Moon: It is the natural satellite of the

earth. Its period of revolution around the
earth as well as the period of rotation about

Solar System : Profile

S.N. Name of
Planets

Mercury
(Buddha)

Radius
(in thousand)
km)

Mean
distance
from the
(sum in
m. km)

Mass
Time
compared
period
to earth of revolution
(around
the sun)

2.4

57.9

0.055

88 days

Time Period
around
own axis
(of rotation)

Number
of
satellites

59 days

Venus (Shukra)

6.1

108.2

0.815

225 days

243 days

Earth (Prithvi)

6.3

149.6

1 year

23 hrs. 56 min

Mars (Mangal)

3.4

227.9

0.108

1.9 year

24 hrs.27 min

Jupiter (Brihaspati)

71.4

778.3

317.9

11.8 years

9 hrs. 50 min.

Saturn (Shani)

1427

95.2

29.5 years

10 hrs. 14 min.

22 + Ring

Uranus (Indra)

23.4

2870

14.6

85 years

10 hrs. 49 min.

12 + ring

Neptune (Varuna)

22.3

4594

17.2

165 years

15 hrs.

Pluto (Yama)*

3.2

5900

0.002

248 years

6.39 days

The mass of the earth is about 6 1024 kg.

The planets Venus & Uranus rotate about their axis from the east to the west whereas all other planets rotate from the
west to the east. Venus & Uranus are called retrograde. * Now demoted

[96]

General Science

or
.co
m

passes close to the sun it has a bright head

and a long tail. Near the sun, some of the
materials of the comet gets evaporated due
to solar heat. The light of the sun exerts a
pressure on these vapours and forces them
away from the comet in the form of tail.
When a comet is far away from the sun, it
shows no tail. A comet appears after regular
intervals of time in the sky e.g. Halleys
comet has a time period of 76 years. It was
last seen in 1986 and is expected to be seen
again in 2062.

Asteroids: The groups of small solid

objects made of rocks and minerals which
move in the gap between the orbits of Mars
and Jupiter are called Asteroids. They are
also known as Minor-planets. They are
more than 5x105 in number. They move
around the sun in the form of rings. They
are about 320 to 490 million km away the
sun. Their orbits are highly elliptical which
enable them to approach the Earth, Venus
and Mercury after regular intervals of time.
Their size varies from 50 m to 350 km in
radius. They are believed to be the pieces of
a much larger planet which broke up due
to the gravitational pull of Jupiter. Ceres is
the largest known asteroid. Their
composition is similar to that of Moon.

Meteorites: They are unburnt meteors

reaching to the earths surface. They
produce craters on the earths surface.

tut

its own axis is 27.33 days. So the same face

is pointed towards the earth. Its diameter
is 3476 km and the distance from the earth
is 3.54x105 km. Its mass is 0.0123 times the
mass of the earth. Its surface is rocky and
rough. There are deep depressions or holes
and high mountains on the surface of the
moon. It does not have atmosphere and
water. Its gravitational pull is 1/6th that
on the earth. Latest measurements showed
that the maximum temperature on the
moon at day is 117C and minimum
temperature at the night is - 171C. Moon
does not emit light by itself. It simply reflects
light of the sun falling on it. The reflected
light on the Moon reaches the earth in
1.28 seconds. Due to its rotation around
the earth, it looks different depending on
its position with respect to the sun and the
earth. The age of the moon is the same as
that of the earth i.e. about 4 billion years.

ssc
ex

Meteors: They are smaller pieces of

stones and metals which are produced due
to breaking of comets while approaching
the sun. When they enter the earths
atmosphere, they burn due to friction of
the atmosphere and burn completely before
they fall on the earths surface. They appear
bright due to burning. Hence, they are
called Fire balls or shooting stars.

Comets: Comet is a heavenly body

which is made of gases, ice and dust
particles and moves around the Sun in a
long spindle shaped orbit. When a comet

Terrestrial Planets: They are closer to

the Sun e.g. Mercury, Venus, Earth and
Mars.
Giant or Jovian or Superior Planets:
They are far away from the Sun e.g. Jupiter,
Saturn, Uranus, Neptune & Pluto.
Albedo: The ratio of the suns energy
reflected by a planet to that incident on it is
called as albedo. It is also known as the
reflecting power of a planet. The clouds
and atmosphere are good reflectors of light.
Higher the value of albedo of a planet,
more is the possibility of atmosphere on
the planet. e.g. For Venus, albedo = 0.85 &
for Mercury, albedo =0.06 & for Moon,
albedo = 0.07. Hence, Venus has denser
clouds and atmosphere but Mercury and
Physics

[97]

or
.co
m

Existence of Atmosphere on a Planet:

The possibility of existence of atmosphere
on a planet depends upon the escape
velocity of that planet. Higher the value of
escape velocity, more is the possibility of
atmosphere on the planet. The escape
velocity depends upon the acceleration due
to gravity (g) and temperature of the planet.
If the value of g is more, the escape velocity
is more. If the temperature of the planet is
high, the average velocity of the gas
molecules may achieve the escape velocity
and consequently, the gas molecules escape
out from the surface of the planet.

star (Sun), then the remaining mass (H2,

He & dust) formed disc shaped clouds
around the sun. These clouds were at very
low temperature vis-a-vis the sun and hence
contracted due to gravitational pull and
condensed to form a small chunk of matter
known as planetesimal. There were larger
number of planetesimals around the sun,
which attracted each other to form biger
chunks of matters. These big chunks of
matters continued to grow by attracting
smaller pieces of matters by gravitational
pull. The matter was scattered in space in
all directions. They gave rise to planets and
satellites. The matters which could not
participate in formation of planets and
natural satellites collided with these formed
planets and satellites. It led to form deep
craters on the surface of planets and
satellites. These craters are visible on the
surface of moon and Mars.

tut

Moon do not have any clouds and

atmosphere.

Thus, to have atmosphere on a planet,

the planet must have lower surface
temperature, higher value of g and higher
escape velocity.

ssc
ex

FORMATION OF SOLAR SYSTEM

Formation of Sun: The Sun was formed

about 5 billion years ago. The clouds of H2,
He and dust formed Nebulae. At the
beginning, these clouds were at very low
temperature. These clouds collapsed slowly
due to their mutual gravitational force of
attraction to form a Protostar. As these
clouds collapsed, the atoms of H2 and He
collided with each other and hence,
temperature accelerated. At a very high
temperature, the atoms of H2 ionised into
ions which further fused together to form
He- nuclei along with the release of
tremendous energy. Thus, sun was formed.
At present, the sun is a middle aged star
and is expected to live for another 5 - billion
years.
Formation of Planets & Satellites :
When a protostar was converted into a

[98]

General Science

Evolution of Earth : The Earth was

formed by the collection of large number of
cold planetesimals. These planetesimals
came from two regions (i) from the inner
planets like Mercury and Venus and they
were rich in iron, silicon, magnesium and
traces of other elements (ii) from the outer
planets like Jupiter, Saturn and Uranus and
they were rich in H2, CO2, CH4 and water.
A larger amount of heat was produced when
these cold planetesimals collided with each
other. Heat was also produced due to (i) the
contraction of planetesimals under the force
of their gravitational pull (ii) the
disintegration of some radioactive elements
like uranium and thorium. Hence, due to
large amount of heat the initial earth was in
a molten state. The melted earth then began
to reorganise itself under the gravitational
pull as follows :

The heaviest materials like iron & nickel

or
.co
m

Hence, pole star appears stationary to the

people on the earth.

The lightest materials began to float on

the surface and formed the crust of the
primitive earth.

The intermediate dense materials arranged itself in between the core and
the crust of the earth and formed the
mantle of earth.

Evolution of a Star : The vast space

between the stars is filled with dust
particles and gases like H2 and He. This
material is called Interstellar matter, from
which a star is formed. The interstellar
matters are in the form of clouds. When
the clouds of gas-particles are illuminated
by nearby stars, the clouds appear as bright
nebulae whereas the clouds rich in dust
appear as dark nebulae because they absorb
the radiation of the stars. The process of
the formation of star begins only if the
original clouds have a mass of at least 1000
solar mass.

The process of reorganisation of molten

matter of the primitive earth into various
layers of different densities is called
differentiation. At the time of
differentration, the water vapours and the
gases in the various minerals were released.
Later on, these water vapours were
condensed to give rain. The rain water
filled the craters on the earth and thus,
oceans were formed. The various gases
released formed the atmosphere of the
earth. The changes occuring on the earth
were fast in the begining now they are
slowing down. At present, these changes
are responsible for the occurence of
earthquakes, eruption of volcanoes and
making and raising of mountain ranges.

tut

sank towards the centre of the earth

which formed the core of the earth.

A star is a luminous heavenly body

emitting its own heat and light
continuously. Stars twinkle because of
refraction of light through different layers
of the atmosphere. Stars appear to move
from east to west because our earth rotates
about its own axis from the west to east,
otherwise stars are stationary with respect
to the earth. The pole star (Dhruv Tara)
lies above the earths north pole i.e. on the
axis of rotation of the earth. The points on
the axis of rotation of the earth appear
stationary to the observer on the earth.

Formation of a Star from Protostar

(Second Stage) : In the protostar the gas
molecules collide with each other.
Gradually these collisions become fast and
numerous due to continuous increase in
the contraction inside the protostar. It gives
rise to a temperature of 10 7C that is
enough to begin nuclear fusion. These
nuclear fusions result in huge amounts of
heat and radiations. Consequently, a
protostar is converted into a star. This
process is very slow and takes about 105
years. Thus, a huge interstellar matter in
the form of clouds of gases and dust, is first

ssc
ex
STARS

Formation of Protostar (First Stage) :

Initially, the interstellar matter is at very
low temperature (173C). Due to the
gravitational attraction the interstellar
matter contracts and is compressed to such
an extent that a huge ball of gases is formed.
This gaseous ball is known as a protostar.
A protostar contains highly condensed
gases mainly H 2 & He. A cloud of
intersteller matter takes about 105 years to
become a protostar. Protostar does not emit
light and heat.

Physics

[99]

(a) White Dwarf : If the original mass

of a star is less than two times the mass of
the sun, the gravitational compression
leaves the core of the star, composed of
protons with electrons flying around in the
form of electron clouds. When this electroncloud with stands the inward gravitational
force, then a stable equilibrium is achieved.
At this stage, the star is called a white
dwarf. It gradually cools finally ceasing to

Formation of Red-giant (Third Stage) :

Due to continuous nuclear fusion of
hydrogen nuclei to form He-nuclei, the
number of H-atoms decrease. It results in
the decrease in pressure in the core of a
star. Hence, the inward force of attraction
increases in the core and the core contracts
rapidly but the outer layer expands
outward. Thus the volume of a star becomes
very large. The outer layer gradually cools
and appears red. This stage of a star is

or
.co
m

Inspite of a large attractive force of

gravitation inside the star, it does not
collapse because there is a high temperature
that provides a high-pressure to counter
balance the attractive force. This balance
continues for billions of years.

known as giant, super gaint or red-giant.

This stage lasts for several million years
and at the end, the rate of production of
energy becomes so high that it explodes in
the form of a Nova or Super Nova, throwing
out the major outer mass into interstellar
space. This is the death of a star. Depending
upon the mass of left core of a star the
following heavenly bodies are formed:

tut

converted into a cluster of protostars and

then into a cluster of stars i.e. a galaxy.

Theories of Origin and Evolution of the Universe

ssc
ex

The Big Bang Theory : This theory was proposed by Le Maitre and Gammow. According to this theory,
at the beginning of the universe, the entire matter of the universe was once concentrated in an extremely dense and hot (1012k) fire ball. Then about 20 billion years ago a vast explosion (big-bang)
occurred. The matter was broken into pieces which were thrown out with high speed in all directions
forming stars and galaxies; which are still moving away from one another. The Hubbles law agrees
with this theory.
Steady State Theory : It was given by Bondi, Gold and Fred Hoyle. According to this theory, the no.
of galaxies is constant and new galaxies are continously created to occupy the position of those galaxies which have the crossed the boundary of the universe. Thus, the size and mass of the universe
are constant.
Pulsating Theory : According to this theory the expansion and contraction of the universe occur alternately i.e. the universe is pulsating. At present, the universe is expanding and after a certain amount of
expansion, it will begin contraction due to the gravitational pull. The alternate expansion and contraction of the universe gives rise to a pulsating universe.

to form neutrons. Hence, the core contains

neutrons only. It gives the birth of a neutron
star.

(b) Neutron Stars : If the original mass

of a star is between 2 to 5 times the mass of
the sun, the recoil of supernova explosion
is set up in the core. Now, the electrons are
forced into the nuclei and the result is
combination between electrons and protons

(c) Black Hole : If the original mass of a

star is more than 5 times the mass of the
sun, the recoil of supernova is extremely
violent. Hence, the core collapses to have
an object which has a very high density
and gravity. As a result any radiation or

emit radiations. Then it becomes a blackdwarf. The most famous white dwarf is
Sirius-B close to the brightest star Sirius.

[100]

General Science

or
.co
m

of milk flowing across the sky. In the front

view it appears spiral. From the side view,
it hasa thick central part (Nucleus) which
gradually becomes thin towards the edge.
Its diameter is about 105 light years. The
sun is at 3104 light years away it centre.
The sun completes one revolution around
the galactic centre in 220 millions years
with a speed of 250 km/second.

GALAXY

Pulsars : They are neutron stars which

emit radio signals at extremely regular
intervals of time. Their pulsating radio
signals are due to their high rotation and a
very large magnetic field.

CONSTELLATION (NAKSHATRAS)

ssc
ex

A Galaxy consists of very large group

of stars, their families (i.e. planets etc.),
dust and gases held together by the
attractive force of gravitation. A galaxy is
a building block of the universe. Total
galaxies are about 100 billions and each
galaxy has about 100 billion stars. Thus,
there are about 1022 stars in the universe.
Our solar system belongs to the galaxy
known as Milky Way galaxy (Akash
Ganga). Another known galaxy is
Andromeda which is about 2.2 million light
years away from us.

tut

material particle that enters this object

never comes out. This object is called a
Black Hole. As the black hole is invisible, so
what is happening inside it and what had
happened to the matter of the core of the
star is unknown. The recent experiments
have shown that one of the components of
Cygnus XI is a black hole.

Types of Galaxies :

(i) Normal Galaxies : They emit

comparatively small amounts of radio
radiation vis-a-vis the total radiations
emitted. They are bright from the centre
and gradually get dim towards the edges.
Milky Way and Andromeda are normal
galaxies.
Depending
upon
their
appearance, the normal galaxies can be
eliptical, spiral or irregular.

(ii) Radio Galaxies : They emit million

times more radio waves than normal
galaxies. They contain stars called Quasars
which are known as quasi-stellar-radiosources.
Milky Way Galaxy : It is so called
because the light from the various stars
together gives the impression of a stream

A constellation is a collection or group

of a few stars. It forms a pattern which
resembles the shape of an animal, object or
a human being. There are 88 known
constellations. They are visible in a definite
part of the sky.
Some of the important constellations
are :
(i) Ursa Major or Big Bear (Saptarishi)
: The word Ursa has been derived from the
Latin word Ursus which means a bear.
Ursa is the feminine of Ursus. Ursa major
consists of seven bright stars. The shape of
the pattern of these stars resembles the of a
great bear. This constellation is seen clearly
in the summer season from April to
September, in the northern part of the sky.
(ii) Ursa Minor (Little Bear) or Dhruva
Matysa : It consists of seven stars which
are closer to each other and less bright
than the star in Ursa Major. Its most
important star is at its tail. This star is
known as Polestar (Dhruv Tara) which is
nearer to the North Pole. The pole star
helps in determining the direction of sailors
Physics

[101]

It is explained on the basis of the

Doppler-effect. When the source of wave
moves away the observer, the apparent
wave-length increases or the apparent
frequency decrease. This is known as Redshift because the region of spectra has large
wavelength and smaller frequency. The
study of the spectral pattern of the galaxies
shows a red-shift. It means that most of the
galaxies are moving away from each other
with enormous speed and the universe is
continuously expanding.
Hubbles Law : Hubble and Milton
studied the red-shift of various gallaxies
and put forth the law. The Hubbles law
states that the recession velocity of a galaxy
is proportional to it distance from us i.e.

(4) Orion, The Hunter (Vyadha or

Mirga) : Its shape is like that a hunter. The
two stars at the top row makes the right and
left shoulder of the hunter. Three stars in the
middle row form his belt and the two stars in
the bottom row form his feet. The faint stars
below the belt are arranged in the shape of a
sword of the hunter. This constellation can
be seen clearly from October to April in the
southern part of the sky.

or
.co
m

(3) Scorpio or Vrischika : It consists of

seven stars whose arrangement resembles
a scorpio. It can be seen clearly from
February to August in the Southern part of
the sky.

RED-SHIFT OF GALAXIES

tut

and travellers. The Indian name of this

constellation is Dhruva Matysa or Laghu
Saptarishi. This constellation can be seen
clearly in July in the northern part of the sky.

ssc
ex

(5) Cassiopeia (Sarmistha) : It consists

of five dominated stars. The pattern of the
stars is like the letter W. This is clearly seen
in October in the Northern part of the sky.
(6) Pleides (Krutika) : It does not have
a specific pattern of stars. It is just like a
cluster of twinkling gems. The cluster of
stars in this constellation are called globular
clusters. This is visible from October to
January in the northern part of the sky.

Where V= recession velocity of a galaxy.

r = the distance of the galaxy from us

and H = Hubbles constant = 16 km per
second per million light years. It means
that any galaxy which at a given moment
is situated, one million light years from us,
is receding away at a rate of 16 km/sec.

[102]

General Science

or
.co
m

COMMUNICATION
SYSTEM

tut

signals). (ii) Frequency Modulation: It

results into frequency modulated wave
(FM-wave singals). (iii) Phase modulation:
It results into phase into modulated signal.
AM wave signals are mainly used for
commercial broadcast of voice-signals. They
can be noisy because atmospheric
phenomena like lightning or man made
electrical signals affect this. AM-wave carrier
frequency ranges from approx. 0.5 to 2 MHz.

ssc
ex

The system of electronic communication

involves the faithful transfer of messages
in the form of electrical signal from one
point to another point. Basic components
of a communication system include
Transmitter, Transmission Channel &
Receiver. The information message is first
converted into electrical signal by a device
called Transducer. This electrical signal is
then transmitted by transmitter. An
electronic signal in the Audio frequency
range cannot be transmitted over a long
distance because of lower value of audio
frequency range. Hence, low frequency
signals are loaded on a high frequency
carrier signal by a process known as
Modulation. It involves translating the
original low-frequency information signals
into high frequency wave before
transmission such that the translated signal
continues to possess the information
contained in the original signal. In
Modulation, some characteristics of the
carrier signal (e.g. amplitude, frequency or
phase) varies in accordance with the
message signal. The message signal is called
Modulating signal which is loaded onto
the high frequency carrier signal to produce
the Modulated wave signal. A modulated
signal has high frequency and a large bandwidth. Hence, it can be transmitted over a
long distance without much loss in energy.
There are three types of Modulation
viz. (i) Amplitude Modulation : It results
into amplitude modulated wave (AM-wave

FM-signals are noise free and of better

quality. They have large bandwidth and
are preferred for transmission of music.
FM signals include(i) FM radio (88 to
108 MHz), (ii) Very High Frequency (VHF)
TV (47 to 230 MHz) & (iii) Ultra High
Frequency (UHF) TV (470 to 960 MHz).

MODE OF TRANSMISSION OF
COMMUNICATION
Analog Communication : In analog
communication, the modulating signal
which modulates the carrier signals for
transmission is continuous or representative
of the original information to be
transmitted.
Digital Communication : In digital
communication, the original information
signal is first converted into discontinuous
amplitude levels & then coded into a
corresponding sequence of Binary symbol
0 & 1. This coded information signal is
then modulated by a suitable modulation
method before the transmission.
Physics

[103]

It is the reverse processs of modulation

that is carried out in a receiver to record
the original information signal.

Modems that support a voice/data

switch have an inbuilt microphone and
speaker for voice communication. In voice
mode, the modem acts as a regular
telephone while in data mode, the modem
acts as a regular modem.
The rate at which a modem can transmit
and receive data (message) is measured as
Bits per second (bps). Higher data transfer
rate can be achieved by data compression
which is performed by some specific modems.
The digital communications, computer
& modem use a binary number system to
deal with digital signals (data). Binary
system involves two volues as 1 and 0 only.
0 refers, open-circuit or No or space.

ssc
ex

In an electronic communication system,

the transmitter modulates the information
signals and transmits them by an antenna
via transmission channels. The receiver
receives the modulated transmission signals
and demodulates them to recover the
original information signals. A transmitter
performs data transmission and a receiver
performs data retrieval. In electronic
communication, data to be transmitted
means information signals.

or
.co
m

DEMODULATION

acts as a modulator & modem-I acts as a

demodulator.

tut

The digital communication involves the

quantization of the digitial data (0 and 1)
by the help of a device called quantizer.
Hence, it becomes relatively more errorfree and noise-free. It makes the digitial
communication more reliable than the
analog-communication.

MODEM

It connects one computer to another

across ordinary telephone lines. It can
function as modulator as well as
Demodulator and hence, its name is
Modem (Mo Modulation and dem
demodulation). In the transmitting mode,
it acts as a modulator while in the receivermode, it acts as a demodulator.

When the information data are supplied

from computer-I to computer-II, modem-I
acts as a modulator and modem-II acts as
a demodulator. When data are supplied
from computer II to computer-I, Modem-II
[104]

General Science

1
mark.

refers to close circuit or yes or

Both 0 and 1 are called Bits. A group of

bits is called a Byte or a binary word. A byte
of two bits (0 & 1) can give a four codecombination : 00, 01, 10, & 11. Hence in
general, the no. of codes is given as N = 2n.
When N
combinations

total

no.

code-

n = the no. of bits in a byte.

FAX
(FACSIMILE TRANSMISSION)
Facsimile means exact reproduction.
Fax transmission usually concerns the
electronic reproduction of a document
(printed words, graphs or photographs) at
a distant place through telephone lines.
At the transmitting end, a fax machine
digitizes the printed matter on paper and
transmits the corresponding data over the

or
.co
m

telephone lines. At the receiving end, a fax

machine receives digital image-information and
reconstructs the received image on the paper.
This is also known as Facsimile Telegraphy.

after being reflected back from the

ionosphere. It is also known as short wave
(SW) band in the radio transmission.

The space communication channel

involves:

SATELLITE COMMUNICATIONS

COMMUNICATION CHANNELS
The communication channel is the
physical medium between a transmitting
and a receiving stations through which the
transmitted signals may propagate.

ssc
ex

Types-(i) Space Communication

channel including satellite communication
and (ii) line communication channels.

tut

Space Communication : It involves the

transmission of the message signals freely
in space by a transmitting antenna and
receiving the signals by intercepting them
with the help of receiving sets or antennas
at the other end.

(iii) Space or Tropospheric Wave

Communication : It involves the transmission
of FM-Radio-signals, TV signals and
Microwave signals in the range of VHF &
UHF. These signals cannot be transmitted by
using ionosphere because the ionsosphere
can reflect the frequency upto 40MHz only.
Hence, these signals are transmitted from
the transmitting antenna to the receiving
antenna directly. Its range depends upon
the height of the transmitting antenna. Its
range can be increased (a) by using a no. of
antennas called Repeaters in between the
transmitting antenna and receiving antenna.
(b) by increasing the height of the transmitting
antenna. This height can be maximised by
locating the transmitter on a satellite.

(i) Ground wave communication (ii) Sky

wave communication (iii) Space or
Tropospheric
or
surface
wave
communication.

(i) Ground Wave Communication : It

is the transmission of the signals between
the transmitting and receiving antennas
close to the earth. It is not suited for very
long range communication becausee it
involves the loss of energy to the earth
during the propagation of the wave. It is
used for between radio broadcasting at
low frequencies ranging from 500 Khz to
1500 Khz. The ground of the wave includes
the medium wave (MW) band.

(ii) Sky Wave Communication : In sky

wave propagation, the wave signals are
first transmitted to the ionosphere and then
is received by receiving sets on the earth

It involves those frequency signals

which can pass through the ionosphere
without being reflected by the ionosphere.
The satellite carries an equipment called
Radio-Transponder. The function of the
transponder includes reception, storage,
amplification and transmission of the
information signals.
The communication satellite is usually
a geo-stationary satellite that appears fixed
at a position above the earth. Its time-period
of revolution is 24 hrs, height 36000 kms
and direction of revolution from west to
east similar to that of the earth. It is
revolving in a circular orbit called Geosynchronous orbit that is coplanar with
the equatorial plane of the earth.
Owing to the curvature of the earth a
single satellite cannot cover the entire earth.
Physics

[105]

or
.co
m

For ground water surveys.

In the field of spying, to lcoate the

position and movements of the enemy.

T.V. REMOTE CONTROL

The Remote Control used in TV and

music system is an electronic device. It
consists of an integrated circuit (I.C.) and
other components like a diode, a transistor,
a capacitor, etc. When a key on the remote
is pressed, it translates it into infrared
signals which are received by the electronic
circuit of the TV and required operations
are performed.
Line Communication : In order to
interconnect (i) a transmitter to an antenna,
(ii) a transmitter to a receiver (iii) a receiver
to an antenna some specific wires are
required. These wires are known as
transmission-lines. Some of them are as
follows:

Remote-Sensing : It is a technique
which is used to observe and measure the
characteristics of the object or phenomenon
at a distance without being in physical
contact with it. Its working is related with
the measurement of some kind of signals
emitted, transmitted or reflected from an
object in order to determine certain physical
properties of the object, like its temperature
location, size, colour nature, etc. The remote
sensing uses, electromagnetic techniques
that covers the entire electromagnetic
spectrum. Any photography is a kind of
remote sensing. RADAR, SONAR, Satellite
with sensors, etc. are other examples of
remote sensing.

tut

For global comunication, three satellites are

parked 120 apart from each other in the
geo-stationary orbit.

ssc
ex

Satellite remote sensing systems provide

the data critical to weather-prediction,
agriculture
forecasting,
resource
exploration (archaeology, geological survey,
forestry, etc.) and environmental
monitoring.
Uses of Remote Sensing :

To know the area of earths surface

covered by forests, types of plants and
density of forest at a particular location.
To prepare waste land maps.

To locate the potential fishing zones.

To locate the debris of a crashed

aeroplane or jet plane.

To identify the extent of pollution and

its source.

To estimate the damage being done by

the floods.

To locate the place where underground

nuclear explosion has been carried out.

[106]

General Science

(i) Parallel Wire Lines : They are

commonly used to connect an antenna with
the T.V.
(ii) Twisted Pair Wire Lines : They are
used as telephone lines.
(iii) Coaxial Wire Lines : They are used
by T.V. cable operators.
(iv) Optical Fibre Lines : They are used
in optical communication.
The efficiency of the transmission line
increases from the parallel wire lines to the
optical fibre lines. The optical fibre line is
the best because it has maximum efficiency
and minimum loss in energy.
Coaxial cable system is better than
parallel twisted pair wire-lines because of
greater available band-width, lower energy
losses and much lower cross-walk.

LASER

Military : As a powerful war weapon.

Weather Forecasting : A laser based

RADAR called Lidar is used for weather
forecasting.

Reading bar codes, manufacturing and

reading compact discs, cutting cloth in garment industry etc. are also some of the uses
of lasers.

MICROWAVE DEVICE

(1) Radar (Radio Detetection &

Ranging) : RADAR system detects the
objects like aeroplanes and ships. Its
antenna transmits microwave (frequency
greater than 1000 MHz) signals which are
reflected from the object. Knowing the time
interval between the transmission and
reception of the signals, the distance of the
object is measured.

(Light Amplification by stimulated

emission of radiation): Laser is a process
by which a coherent, hightly intense mono
chromatic and almost perfectly parallel
beam of light is obtained. The term Laser
is also used for the beam of light obtained
this way.

or
.co
m

A telephone link can be established

using ground waves, sky-waves,
microwave, co-axial cables and latest, the
optical fibre cables. The microwave link is
more noisy than the coaxial link. The optical
fibre link are free from noise & energy
losses.

tut

In the cable system, the deviation in

frequency & phase response of the signals
passing through a cable are set by using a
device called equalizer.

ssc
ex

Use of Lasers : Lasers are used in :

Microsurgery : For delicate organs e.g.

retina, cervical tumours, tissues, etc.

Engineering : Tiny welds are made with

precision using powerful laser beams.

Industry : To drill holes in diamonds

and hard steel.

Communication : In optical communication.

Holography : In three dimensional photography without lenses.

(2) Microwave Oven : It bakes food

using microwaves. These microwaves are
produced in the oven at a high frequency
of about 2450 MHz by means of a
Magnetron. Since the metals block the
microwaves, hence, most microwave ovens
are made of glass. Microwaves produced
are directly absorbed by the food-material
without heating the surroundings. The
molecules of food content vibrate on
absorbing the microwaves that causes heat.
The energy is used by the food only and
hence, it takes a small interval of time to
cook the food.

Physics

[107]

or
.co
m

ELECTRO
MAGNETISM

COULOMBS LAW

Electrostatics deals with the study of

electric charges at rest. Electric charges at
rest are produced either by friction between
two insulating bodies which are rubbed
against each other or by electrical induction
between a charged body and an earthed
uncharged body.

electron or a proton. Electric charge is

always conserved when some electrons are
transferred from one body to the other, the
body giving electrons becomes slightly
lighter and the body gaining electrons
becomes slightly heavier.

tut

ELECTROSTATICS

ssc
ex

When two insulating bodies are rubbed

against each other, electrons are transferred
from one body to the other. Electrons are
negatively charged particles. Hence, the
body giving electrons becomes positively
charged while the body gaining electrons
becomes negatively charged. Electric
charges are of two types only viz. positive
and negative. Like charges repel and unlike
charges attract each other.
Bodies gaining two kinds of charges on
rubbing
Positive Charge
Glass Rod
Fur or woollen cloth

Dry hair

Negative Charge
Silk Cloth
Rubber rod, Ebonite
and Amber.
Rubber Shoe
Cloth
Comb

Woollen Coat

Plastic Seat.

Woollen Carpet

Nylon or Acetate

The minimum amount of charge that

can be transferred from one body to the
other is the charge on an electron (1.6
1019c). Hence the total charge on a charged
body is equal to the sum of products of no.
of electrons transferred and charge on an
[108]

General Science

The electric forces between the two

point charges is directly poportional to the
product of the charges and inversely
proportional to the square of distance
between the charges. The electric force may
be attractive or repulsive depending upon
the nature of the two charges. The
coulombic force (electric-force) is much
stronger than the force of gravitation. An
uncharged body can be charged by placing
it near a positively charged body without
actual physical contact between them (by
induction). The positive charge present on
the charged body attracts electrons present
inside the atoms at the surface of the
uncharged body. Hence, a few electrons
come out at the surface resulting in a
negative charge at the surface and an equal
positive charge appears on its opposite face.
Thus it gets polarised because it has equal
and opposite charges at the two opposite
surfaces. If this body is earthed, the positive
charge disappears and the body becomes
negatively charged. The uncharged body
has now a net negative charge. The
uncharged body can acquire a net positive
charge too provided the charged body
placed near it was negatively charged.

Protecting a certain region of space

from external electric fields is known as
electrostatic shielding.

Van de graaff Generator : It produces

highly energised positively charged
particles or ions by producing very high
electric voltage. It is used in scientific or
industrial works.
Atmospheric Electricity : Earth is a
good conductor of electricity. Its electric
potential is 0 Volt everywhere at the
earths surface. When a positively charged
body comes in contact with the earth,
electrons flow from earth to the body
whereas when a negatively charged body
comes in contact with earth, electrons flow
from the body to the earth. Lower
atmosphere is a poor conductor of electricity
but its conductivity increases with increase
in height. Ionosphere is a very good
conductor. This is primarily due to
ionization of particles of air by cosmic ray
particles having energies to the order of
1014 MeV.

ssc
ex

A hollow conductor stores charge only

at its surface. Hence, electric field remains
outside only, and inside the hollow electric
field is zero. Such a space having zero
electric field is known as Faradays Cage.
Therefore, to protect delicate instruments
from external electric fields, they are kept
inside a hollow conductor. In a thunderstorm accompanied by lightning, it is safer to
be inside a car or a bus than to be in the
open ground or under a tree. The metallic
body of a bus or car provides electrostatic
shielding from the lightning.
If electric charge is supplied continously
to a conductor having certain pointed ends,
the electric charge is sprayed out through
the pointed ends. A conductor with pointed
ends is a good receiver of charge also. A
lightning conductor placed at the top of a
building has a number of sharp spikes at
its two ends. Upper end is free in air to
catch electric charge produced due to
lightning and the lower end sprays charge
into the ground. Thus it provides a safety
to the building.
Electroscope : The device is used to
detect the presence of electric charge and
type of charge on a body. Its most common
type is gold leaves electroscope. It can
measure potential-difference as well.

or
.co
m

ELECTROSTATIC SHIELDING OR
ELECTROSTATIC SCREENING

used to store electric charge is known as

capacitor.

tut

When a charged glass rod is brought

near a piece of paper, it attracts the paper
because of force of attraction between the
charge on rod and induced charge which
has appeared on the paper.

Capacitor or Condenser : A device

Thunderstorms & Lightning Flashes :

In every thunderstorm, the positive and
negative ions produced are separated in
the cloud. The positive ions are at about 6
km and the negative ions are at about 2-3
km above the earths surface. It results in a
very high potential difference (107 to 108v)
between the lower negatively charged level
of cloud and the earths surface. It causes
the electric breakdown of air. Consequently
the intervening air gets ionised and
conducts charge from the cloud to the earth
in the form of a lightning flash. Each flash
lasts for 2103 seconds and desposits about
20 coulomb charge on earth. All the world
over,
there
occur
about
40000
thunderstorms per day.
In recent years, many important
industrial applications of electrostatics have
been developed. Some of them are:
Physics

[109]

or
.co
m

(1) In prevention of pollution of atmosphere

by electrostatic precipitation of fly ash.

(2) In designing electrostatic generators like

Van de Graaff generator.

Metallic Conduction and Electrolytic Conduction

Electrolytic Conduction
The flow of current through electrolyte is called
electrolytic conduction.
Electrolytic conduction is due to the movement
of positive and negative ions in the electrolyte.
The chemical properties of the electrolyte
change due to electrolytic conduction.
The electrolyte decomposes due to electrolytic
conduction.

tut

Metallic Conduction
1. The flow of current through a metallic
conductor is known as metallic conduction.
2. Metallic conduction is due to the movement
of electrons in the metallic conductor.
3. The chemical properties of the metallic conductors
do not change due to metallic conduction.
4. The metallic conductor is not
decomposed due to metallic conduction
but it is only heated up.

Conductor & Insulator

Semi Conductors
(1) They are poor conductors
of electricity.
(2) They have lower density of free
electrons & holes as carriers of
charge.
(3) They have very high
(3) They have relatively lower
conductivity.
conductivity.
(4) Conductivity decreases with rise (4) Conductivity increases with rise
in temperature.
in temperature.

Conductors
(1) They are good conductors of
electricity.
(2) They have higher density of free
electrons as carriers of charge.

ssc
ex

(4) In understanding volcanic lightning

and common lightning strikes from the
cloud base to the ground.

(5) In the design of cathode ray tubes for

RADAR and TV.
(6) In ink-jet printing, which is high quality
and delivers high speed printing.

P R and V R (as V = lR)

It means, in series connections, the potential difference and power consumed
will be more in higher resistance.

(7) In electrostatic loud speakers and

microphones.

Joules heating effect of current is common to both d.c. and a.c. That is why
the instruments or eleectrical appliances
such as heater, press, geyser, toaster

[110]

General Science

(3) They have very low

conductivity.
(4) Conductivity increases
with temperature.

etc. works both on d.c. and a.c. Joule

heating effect is irreversible. It means if
the direction of current in a resistor is
reversed, the cooling of resistor does
not occur whereas heating of the resistor takes place. If the resistances are
connected in series, the current I is same
through each resistor, then

(3) In electrostatic spraying of paints,

powders etc.

Electroplating with Silver: For

electroplating with silver, solution of
sodium silver cyanide [Na[Ag (CN)2] is used
as an electrolyte.

Insulators
(1) They are bad conductors
of electricity.
(2) They do not have carriers
of charge.

If the resistence are connected in parallel, the potential difference V is same

across each resistor. Then

and

(as V = lR)

It means in parallel connections, the

current and power consumed will be
more in smaller resistances.

In series grouping of bulbs, the bulb of

higher wattage will give less bright light
and will have smaller resistance and potential difference across it. If one bulb
gets fused the other bulbs will not work.

CURRENT ELECTRICITY

Unit of electric current is Ampere (A).

1 Ampere

. Conventionally, the

electric current flows from higher to lower

potential against the flow of electrons.
Ohms Law

The current flowing through a

conductor is directly proportional to the
potential difference across the ends of the
conductor provided the temperature and
other physical conditions of the conductor
remain the same.
Potential difference (V) Electric
current (I)

Electric Potential : The amount of work

done in bringing unit positive charge at a
point is called as potential at that point.
Electric potential = work done/charge =
Joule/coulomb = volt. Unit of electric
potential is volt (v).

or
.co
m

In parallel grouping of bulbs, the bulb

of higher wattage will give more bright
light and will pass greater current
through it. It will have lesser resistance
and same potential difference across it.
If one bulb gets fused, other bulbs will
work.

tut

ssc
ex

Potential difference (p.d.). It is equal to

the work done in moving a unit positive
charge from one point to another point.

Electric potential and potential

difference are physically similar quantities
having common unit of volt. Electric
potential determines the direction of flow
of charge from one conductor to another
conductor or from one point to another
point through a conductor. Electrons flow
from lower potential to higher potential.
Electric potential and potential difference
can be positive and negative depending
upon the nature of electric charge.

Electric Current : The amount of

electric charge flowing through any crosssection per unit time is known as electriccurrent.
Electric Current (I)

or, pot. diff. (V) = constant (R) Electric

current (I)
or

Where

constant

for

conductor known as resistance. Unit of

resistance is ohm (W).
Resistance of a conductor is its ability
to oppose the flow of current. For a
conductor, the resistance
, where l = length of conductor.
A = area of cross-section of conductor.
r = resistivity of conductor.
Resistivity (r) of a conductor is a
constant. It depends upon the nature of
material of the conductor.
Conductivity (C)
= ohm1 = mho.
Physics

[111]

t = time interval for which current is

supplied.

Combination of Resistances

When two or more resistances are

arranged in series i.e. in a common path of
flow of current, the net resistance is equal
to the sum of individual resistance. Hence,
in series, the net resistance becomes larger.
For two resistances R1 & R2 : Rs = R1 + R2 >
R1 or R2.

ssc
ex

< R1 or R2

EMF (electromotive force) of a cell or

battery: It is equal to the potential difference
between the electrodes when current is not
drawn out from the cell.
Heating Effect of Current : When an
electric current flows through a conductor,
an amount of heat is produced.

Joules Law of Heating Effect :

where H = amount of heat produced.

I = amount of current in conductor.
R = resistance of conductor.

[112]

General Science

Electrical energy = I2Rt = VIT =

Electrical power
= I2R =VI

Unit of electrical energy is Joule (J) and

that of power is watt (w). Horse-power is
another unit of power. 1 Horse-power
(H.P.) = 746 watt. The practical commercial
unit of energy is kilowatt hour (KWH).

When two or more resistances are

arranged in parallel i.e., between two
common points of two different paths of
flow of current, the reciprocal of the net
resistance is equal to the sum of reciprocals
of individual resistances. Hence, in parallel,
the net resistance becomes smaller. For two

Since heat is the form of energy, hence,

heat produced due to the flow of current is
electrical energy consumed in a given
electrical circuit. Thus, the net

tut

= ohm1m1

resistances R1 & R2 in parallel,

or
.co
m

V = Potential difference across

conductor.

Conductivity (K)

1 KWH = 1000 60 60 = 3.6 106

Joule.
Electric Bulb : An electric bulb has a
tungsten filament enclosed in a glass
envelope filled with inert gases like argon.
Tungsten filament has a very a high melting
point and resistivity. Its resistance is very
high. Hence on passing electric current, it
produces heat and light.
Electric Iron (Electric press), Heater,
Geyser, Toaster & Immersion Rod : These
heating appliances have Nichrome (an alloy
of nickel, iron and chromium) wire as
heating element. Nichrome has high
melting point, resitivity and malleability
and it does not oxidise in air easily. On
passing current, it gets heated up.
Carbon Arc Lamp : It consists of two
carbon rods as the electrodes separated by
a smaller air gap. When a high potential
difference is applied across the rods, a spark

or
.co
m

Electrolysis : When an amount of

electric current is passed through a solution
or melt of an electrolyte, the electrolyte
dissociates into positive ions (cations) and
negative ion (anions). The cation gets
deposited at negative electrode (cathode)
and the anion gets deposited at the positive
electrode (anode). This phenomenon is
known as electrolysis. Electrolysis is
explained by the Faradays laws of
electrolysis. Faraday constant (F) = 96500
coulomb/gram equivalent = charge on one
mole of electrons. Electrolysis involves direct
current (d.c.) only and not a.c.

Electric Fuse Wire : Usually it is an

alloy of tin (63%) & lead (37%). It has high
resistance and low melting point. It is
connected in series with the electrical
installations. All of a sudden, if strong
current flows, the fuse wire melts away,
causing the breakage in the circuit, thereby
saving the main installations from being
damaged. Thus, it is capable of saving costly
appliances.

Chemical Effect of Electric Current

tut

jumps across the air-gap due to ionization

of air & a very bright light is emitted by the
gap. This light is called an arc-light. The
carbon arc lamp is used in electric welding,
search lights and cinema projectors.

Power Cell Chemsitry

Electrodes
Copper and Zinc
rods

Daniel
cell

Copper-container
and zin rod

Leclanche cell
Dry cell

Depolariser EM For Voltage

Absent and the cell 1.08 Volt
suffers from polarisation

dilute solution of
H2SO4

Copper-sulphate
(CuSO4)

Carbon and zinc rods

Ammonium chloride
(NH4Cl)

Manganese dioxide 1.45 volt

(MnO2)

Carbon rod and zinc

pot

Ammonium chloride
(NH4Cl)

Manganese dioxide 1.5 Volt

(MnO2). ZnCl2 being
hygroscopic absorbs
water produced.

A set of perforated
lead plates with lead
(PbO2) in holes as
positive and a set of
lead rods as negative

dilute (20%) H2SO4

Solution with specific
gravity 1.25. when the
specific gravity of
H2SO4 solution
decreases to 1.18 the
cell requires recharging

lead oxide (PbO2)

20% solution of
potassium hydrooxide
(LiOH)

(Fe(OH)2] &
(Ni(OH)2]

Lead-Acid
Accumulator

Electrolyte
Dilute solution of
H2SO4 (sulphuric
acid)

ssc
ex

Cell
Voltaic
cell

Alkali-acculAnode is a perforated
mulator or NiFe cell steel grid filled with
Cell or Edison cell (Ni(OH)2] and cathode
is a steel grid filled

1.1 Volt

2.2 volt

1.36 Volt

with [Fe(OH)2] and

Physics

[113]

Anodising : It is the process of coating

aluminium with its oxide electrochemically to protect it against corrosion. In
dilute sulphuric acid as electrolyte, the
aluminium article is made the anode.
To give the surface of the article beautiful colours, dyes are mixed in the electrolyte.

Electrotyping : It involves the preparation of exact copies of metallic type

used in the printing work and the engraved blocks on the metals by the process of electrolysis. A sheet of wax is
first pressed against the type set or block.
The impression obtained on wax is made
conducting by coating it with graphite
powder. Then it is copper-plated by the
process of electrolysis. The sheet so obtained is a copy of the type of block.
This process is also used for the manufacture of gramophone records.

ssc
ex

[114]

or
.co
m

Electroplating : The process of depositing a layer of precious metal like gold,

silver, nickel and chromium over cheap
metals like iron and copper by electrolysis is called as electroplating. The precious metal is taken as anode and cheap
metal as cathode. The electroplating prevents corrosion (rusting) and makes the
cheap metals attractive.

Extraction of Metals from the Ores :

Metals like sodium, aluminium, magnesium, calcium, zinc, copper etc. are extracted from their ores by electrolsysis.

Purification of Metals : It is carried out

by using impure metal as the anode,
pure metal as the cathode and a double
salt of the pure metal as electrolytes
when a current is passed through the
electrolyte solution, pure metal gets
deposited at the cathode. This methode
is used to purify blister copper.

Production of Oxygen and Hydrogen :

Oxygen and hydrogen are manufactured commercially by the electrolysis
of acidulated water.

tut

Applications of Electrolysis :

General Science

Manufacture of Chemicals : By the

electrolysis of sodium chloride solution,
caustic soda is prepared.

Medical Applications : Electrolysis is

used for nerve stimulation especially for
polio, for removing unwanted hairs on
any part of the body etc.

ELECTROCHEMICAL

CELL

It converts chemical energy stored in

the electrolyte into electical energy by
chemical reaction.

An electro chemical cell consists of two

electrodes viz. anode and cathode; an
electrolyte to provide ions
and a
depolariser to prevent the formation of
hydrogen coating on the surface of cathode.

Galvanometer : It is based on the

magnetic effect of current. When a coil
having electric current is suspended in a
uniform magnetic field, it gets deflected.
This forms the basis of galvanometer. A
galvanometer connected in any part of an
electric circuit indicates the flow of current.
It is used to construct devices like Ammeter
and Voltmeter.

Mercury Cells : EMF or Voltage =1.36

volt
Life : upto 3 years used in a watches,
hearing aids, portable scientific instruments.
Silver Oxide Cells : EMF = 1.62 volt.
Life and uses similar to that of mercury
cells.
Lithium Cells : Life : upto 10 years.
Used in quartz watches, mobiles, etc.
Alkali Cells : They are very cheap and
environmentally safe. Life shorter. Use
similar to other button cell EMF = 1.5 V

or
.co
m

Cyclotron : It is a device used to produce

highly accelerated positively charged
particles under the effect of a strong
magnetic field produced by an
electromagnet. Cyclotron is used for
nuclear works so as to cause nuclear
disintegration, etc.

tut

Button Cells : They are tiny dry cells.

They are :

Ammeter : It measures the amount of

electric current in any part of circuit in
series.

Voltameter or Electrolytic Cells : An

arrangement consisting of identical
electrodes (Anode and Cathode) in an
insulating container with an electrolytesolution to carry out electrolysis is termed
as a voltameter or electrolytic cell. It
consumes electrical power to cause
electrolysis. An electrochemical cell or a
common cell produces electric power.

Voltmeter : It measures potential

difference across a circuit in parallel.

ssc
ex

Battery : An arrangement of a no. of

cells in series to provide higher voltage of
direct current (d.c.) is called a battery.

Magnetic Effects of Current : When

an amount of electric current flows through
a conductor, it develops an amount of
magnetic field around itself.

Electromagnet : It consists of a coil of

an insulated wire (usually copper) closely
wound around a soft iron core. When an
electric current passes through the coil, the
arrangement acts as an electromagnet.

Electromagnets are used in many

devices like electric-bell, electric horn,
telephone receiver, electric relay, etc.
Electromagnets fitted on cranes can lift
heavy iron pieces.

We can produce high voltage on the

human body without getting a shock.
For this the person must stand on a
highly insulated platform. Hence with
high voltage on the body, no charge
will flow to the ground through the
body and the person will not get any
shock. There is an impression among
many people that a person touching a
high power line gets stuck with the
line. This is not a correct notion because there is no special attractive force
that keeps a person stuck with a high
power line. The actual reason is that a
current of the order of 0.05 ampere or
even less is enough to bring about a
disorder in our nervous system. As a
result of it, the affected person may
temporarily lose his ability to exercise
his nervous control to get himself free
from the high power line.
Physics

[115]

When a metallic wire is carrying an

electeric current, it is not charged because the total no. of electrons and that
of protons in any section of the wire
remains the same. Hence net charge on
the wire is zero.

or
.co
m

and is used to produce alternating current

by an a.c. generator.
Electric Motor : It converts electrical
energy into mechanical energy. It is based
on the fact when a current carrying coil is
placed in a magnetic field, it experiences a
torque that causes rotation of the coils.
Electric motors are used to operate many
appliances like fans, coolers, mixers,
geysers, refrigerators washing machines etc.
Motor Starter : When a large electric
motor is switched on, its initial current is
very high and that can damage its circuit.
Hence, the initial higher current should be
reduced. A motor starter has a large variable
resistance. When an electric motor starts,
the motor starter automatically goes in to
reduce high current and comes out after
switching off the motor. Thus it regulates
an electric motor at start and stop.

For a given electrical installation, when

an electrical appliance of high wattage
is switched on it draws more current.
Consequently, the voltage across the
nearby appliance of lower wattage is
lowered for a moment until it is established by the transmission grid. e.g (i)
When a car-engine starts, the car light
gets dimmer for a moment (ii) Light
from a bathroon bulb gets dimmer for a
moment when the geyser is switched
on.

tut

Potentiometer : It is an electrical device

used to compare emfs and internal
resistence of the two cells.

ssc
ex

Wheatstone Bridge : It measures an

unknown resistance with accuracy.

Meter Bridge or Slide Wire Bridge : It

is the practical form of wheatstone bridge.

Choke-Coil : It regulates alternating

current in a given circuit. Its resistance
value is zero and hence, it does not consume
power. A capacitor can do a similar
function.
Generator (Dynamo) : It converts
mechanical energy into electrical energy. It
is of two types:

Electromagnetic Induction : Whenever

the magnetic flux linked with a closed
metallic-loop changes, an amount of emf is
induced in the loop. The induced emf
causes flow of induced current in the loop.
This phenomenon is known as
electromagnetic induction. It can be carried
out by (i) moving a magnet towards or
away from the loop (ii) moving a loop
towards or away from the magnet (iii)
rotating a loop in front of a magnet. This
effect forms the basis of serveral devices

(ii) Alternating current (A.C.) generator :

it produce A.C.

Shunt : It is a low resistance connected

in parallel to a device or an electrical circuit
to provide a subway for the surplus current.
Thus, it provides a safety to the device or
the ciruit.

[116]

General Science

(i) Direct Current (D.C.) generator : it

produces D.C.

Both the generators work on a common

principle. When a metallic coil rotates in a
magnetic field, an induced em.f. is produced
in the coil. However, their constructions
are a bit different.
Transformer : It converts higher
alternating current at lower alternating
voltage into lower alternating current at
higher alternating voltage and vice-versa.

or
.co
m

DOMESTIC ELECTRIC CIRCUITS

The electric power is supplied to the

houses or factories through undergound
cables or overhead wires on poles. A single
phase electric line system comprises three
wires, namely phase wire or line wire,
neutralwire and earth-wire. These wires
coming from power substation are
connected to an electric meter in a house
or a factory. An electric fuse is placed in
the path of the phase wire before it is
connected to the electric-meter. This fuse is
known as pole-fuse and has a definite
current rating. If current exceeds this rating
value, the fuse wire will melt.

Inverter : It converts D.C. into A.C. For

domestic purposes it is specially designed
to convert D.C. from a battery to A.C. & to
charge the battery. When the mains supply
is available, it charges the battery (converts
A.C. into D.C.) whereas in absence of the
mains supply, it automotically switches on
the A.C., converted from D.C. supplied by
the battery. Thus it fulfils electric supply
during the power break down.

with a turbine. In case of a hydroelectricity

plant, the potential energy of water stored
in a dam is converted into kinetic energy of
the falling water which in turn is converted
into the kinetic energy of the armature of
the generator. This kinetic energy finally
appears as electrical energy known as
hydro electricity. At a thermo-electric plant,
the function of the falling water is done by
hot-steam coming from boiling water. It
requires heat energy produced by burning
the fuel like coal & petroleum or heat
produced by nuclear reactor.

tut

It is of two types viz (i) Step-up

transformer : It converts higher a.c. at lower
a.c. voltage into lower a.c. at higher a.c.
voltage. It is used at the power station (ii)
step-down transformer : It converts lower
a.c. at higher a.c. voltage supplied by power
station into higher a.c. at lower a.c. voltage
to be used for domestic purposes. It is used
at the colonies. Transformer works on the
principle of mutual induction, a form of
electromagnetic induction.

ssc
ex

Loudspeaker : It converts electrical

energy first into mechenical energy and
then into sound energy. It works on the
fact that when a current carrying coil is
placed in a magnetic field, the coil
experiences force. This force causes
vibrations in a cone. Consequently sound
is produced. Its most common type is
moving coil loudspeaker.

Microphone : It converts sound energy

into mechanical energy of a vibrating
diaphragm and then finally into electrical
energy to be supplied to the loudspeaker.
Its most common type is the moving coil
microphone.

GENERATION AND
TRANSMISSION OF POWER

Electric power generation occurs in two

forms viz. Hydroelectricity and thermal
electricity. Both of them involve an electric
generator whose armature is connected

Systems of power distribution in a

house: The output electric power of the
main switch can be distributed in a house
by two systems. They are :
(i) Tree System : This system of power
distribution is like the distribution of the
branches of a tree. The power supply of
different circuits originates from different
fuses. So if a particular fuse melts, then the
other circuit remain unaffected. Different
appliances in a given circuit are connected
in parallel so that they can be switched on
or switched off independently. The parallel
Physics

[117]

Sockets: A socket has three holes. The

top bigger hole is for the earth, the lower
right hole is for the live wire and the left
hole is for the neutral wire.
Switches: An electric switch, is always
connected across the live wire. If a switch
is connected in the neutral wire, the socket
remains live even when the switch is in the
off position. It can cause a shock from the
element of a heater or other appliance even
when the appliance is not in use.

ssc
ex

Earthing: It is usually a copper wire

whose one end is connected with metal
casing of an electric appliance. The other
end of the wire is connected to the copper
plate which is buried deep inside the earth.
When the live wire touches the metal casing
of an electric-appliance, it can cause electric
shock on touching the appliance. But in
the presence of earthing current flows from
the metallic casing to the earth through the
earthing-wire. It produces heat in the circuit
that in turn causes the melting of fuse in
the circuit. The circuit is switched off
automatically. It saves the appliance from
burning and a person touching the
appliances does not get an electric shock.

or
.co
m

(ii) Ring System: In this system the

three wires namely live, neutral & earth,
start from the main fuse and return to the
main fuse ofter connecting various
appliances. Each appliance has a fuse. So
if a fuse melts due to short circuiting, then
only that appliances is switched off. Other
appliance remain unaffected and continue
to work. This system is easy to install and
cheaper.

hence it is connected with the green or

yellow wire. The remaining two pins are
connected with red or brown (live) wire
and black or blue (neutral) wire. The earth
pin being thicker cannot be inserted in the
live of the socket even by mistake.

tut

connection gives equal potential difference

across each appliance in a circuit. This
system is complex and expensive.

Whenever there is lightning in the sky,

the electric circuits should be switched off
to save the electric appliances connected in
these circuits from burning.

Flexible Cables: An electric-appliance

is connected with three-core flexible cables.
The insulations on the three wires are
coloured (i) Red or brown for live wire (ii)
black or light blue for neutralwire and (iii)
green or yellow for earth wire.

Plugs: A three-pin plug consists of one

longer and thicker pin and two identical
thin pins. The thick pin is for earthing and

[118]

General Science

The insulation on the wire should be of

high strength so that it may not melt easily
when wires are heated due to a large
current flowing through them. Wires
carrying current electricity should not be
touched bare footed. The live wire is at
higher potential and the earth is at zero
potential. If we touch the live wire bare
footed, a large current will pass through
our body. So we will receive a severe shock.
This shock affects our nervous system and
may cause even death. Hence, while using
electricity, we must wear gloves made of
insulated material and shoes of rubber sole
so that current may not flow through our
body.

MAGNETISM
An iron ore piece having the structural
formula Fe 3O4 (ferrous-ferric oxide) can
attract small pieces of iron. Such ore pieces
were first of all found in the district of
Magnesia in Asia Minor in Greece. These
ore pieces were called Natural Magnets. A
Greek Philosopher, Thales of Miletus had

or
.co
m

observed these ore pieces in 600 B.C. This

iron ore is called Magnetite. Magnetite was
also called lode-stone in the sense of
leading stone to show geographic directions
(North-South).

drawn into the ring, the enclosed region

will become free of magnetic field. Super
conductor also provides perfect magnetic
shielding as no magnetic lines pass through
the super conductor.

A magnet is made of iron or its alloys.

Each magnet has two equal and opposite
magnetic poles viz. North pole and Southpole lying at its ends.

Magnetic shielding is used to protect

costly wrist watches from external
magnetic fields by enclosing them in a soft
iron core.

tut

When an iron bar is magnetised, the

spins are aligned parallel to the field. Hence,
the length of the bar in the direction of
magnetisation increases. This effect is
known as mangetostriction effect. This effect
is used for producing ultrasonic waves.

CLASSIFICATION OF
MAGNETIC MATERIALS

ssc
ex

It we cut a magnet, we get smaller

magnets again, instead of an isolated north
or south pole of the magnet. Hence the
magnetic poles always exist in pairs and
not as a single magnetic monopole. Like
poles repel each other and unlike poles
attract each other. Each magnetic pole can
attract small pieces of iron, nickel, cobalt.
When a magnet is suspended at mid-point
by a thread, its north pole points the
geographic north and south-pole points
geographic south. It is its directional
property. On heating, the magnets lose their
magnetism.

Magnetism in a magnet is due to the

proper alignment of electron spins.

MAGNETIC SCREENING OR
SHIELDING
A space can be shielded from magnetic
field by surrounding the space with a soft
iron ring. As magnetic field lines will be

(1) Diamagnetic Substances : They are

weakly repelled by an external magnetic
field, e.g. Bismuth, antimony, copper,
gold, quartz, mercury, water, alcohol,
hydrogen.
(2) Paramagnetic Substances : They are
weakly attracted by an external
magnetic field e.g. aluminium,
platinum, chromium, manganese,
copper sulphate, crown glass, oxygen
etc.
(3) Ferro Magnetic Substances : They are
strongly attracted by an external
magnetic field e.g. iron, cobalt, nickel
and their alloys like Al Ni, alnico,
tinconol vicalloy, steel, perm alloys, mumetal, radio-metal, etc.
Ferromagnetic substances are used for
making permanent magnets and
electromagnets.
Physics

[119]

or
.co
m

The ferromagnetic materials used for

coating magnetic tapes in a cassette player
or for building memory stores in a
computer are ferrites. Most common
ferrites used are MFe2O4 where M= Mn,
Fe, Co and Ni.

Geographic Meridian q = Magnetic

declination.

d = Magnetic dip.

H = Horizontal component of the earths

magnetic field (BE).
V = Vertical component of BE.

ssc
ex

Earth acts as a huge magnet. Its

magnetic south pole is at its geographic
north and is located in North-Canada ,
longitude 96 west and latitude 70.5 North.
Its magnetic north pole is at the geographic
south and is located in Antarctica,
longitude 84 east and latitude 70.5 south.
Geographic Meridian : An imaginary
vertical plane passing along the axis of
rotation of the earth at a place is known as
geographic meridian at that place.
Magnetic Meridian : An imaginary
vertical plane passing along the axis of a
freely suspeneded magnet at a place is
known as magnetic meridian at the place.
Magnetic Declination (q) : The angle
between the geographic and magnetic
meridians at a place is known as magnetic
declination at that place. It is in the order
of 20.
Magnetic Inclination or Magnetic Dip
(d) : The angle between the direction of the
earth magnetic field and the horizontal
direction in the magnetic meridian is
known as dip-angle or magnetic dip. Its
value is maximum 90 at the poles and
minimum 0 at the equator.
Horizontal Component : It is the
component of total magnetic field of the
earth horizontally in the magnetic meridian.
In the given diagram : Plane PQRS =
Magnetic meridian. Plane = PQUT =

tut

EARTHS MAGNETISM

[120]

General Science

When a compass is used by mariners

and others at a place, the magnetic needle
of the compass sets itself along the
horizontal component of the earths
magnetic field in the magnetic meridian.
By knowing the angle of dip and magnetic
declination, the location of the place can
be determined.
If d = 0 the place is at the equator,
if d = 90 the place is at the poles.
At the geographic north pole, the
magnetic north pole of the magnetic needle
will be vertically down while at the
geographic south pole, the south pole of
the needle will be vertically down.
If d is more than 0 and less than 90,
the place is between the pole and the
equator.
Evidences
magnetism :

behind

the

earths

(i) A fresh suspended bar magnet always

aligns itself along the geographic northsouth. It means the north pole of the
magnet is attracted by the magnetic

(iii)When we draw field lines of a magnet,

we get neutral points. At these points
the net magnetic field due to the magnet
is completely neutralized by the
horizontal component of the earths
magnetic field.

The resistance of an ideal voltmeter

should be infinity.

The potential across a cell in closed

circuit is less than the emf due to its
internal resistance.

Larger the current drawn from a cell,

smaller is the potential difference across it.

Energy dissipated by the cell = Elt,

where E = emf, I = current, t = time.

Energy dissipated in the external circuit

of a cell = VIt, where V = potential drop
across the cell.

The emf of voltaic cell is 1.08 V, that of

Daniel cell is 1.12 V and that of Leclanche
cell is 1.45 V.

The material of the heating element of

an electric heater should have high resistivity and high melting point.

Acid accumulator is most likely to be

damaged due to short circuiting.

The heat generated in a wire is doubled

when both the radius and length of the
wire are doubled.

Fast charging does not cause sulphation

of acid accumulator, but fast discharging does it.

Thermocouple should not be used to

measure temperature above the neutral temperature.

And if they are connected in parallel,

the time taken to boil the same amount
of water will be T1T2/(T1 + T2).

ssc
ex

When two lamps of different wattage

are connected in series, the lamp of
lower wattage glows more brightly.
The power of a heater when connected
across a power supply of negligible internal resistance is P. If the length of
the coil is halved, the power of the remaining wire is less than 2P.

Substances which lose their resistivity

at low temperature are called superconductors.

If a heater boils 1 kg water in time T1

and another heater boils the same water in time T2, then both connected together in series will boil the same water
time T1 + T2.

The internal resistance of an ideal cell is

zero.

Filament of 100 W lamp is thinner than

that of 200 W lamp.

Energy is dissipated inside a cell due to

internal resistance.

The current capacity increases, when

the cells are connected in series.

In the gases, the charge carriers are

electrons and + VE ions.

The resistance of an ideal ammeter

should be zero.

The quantity in electricity that is analogues to temperature in heat is potential.

TRIVIA

or
.co
m

(ii) When a soft iron piece is buried below

the earths surface along the north-south
direction, it acquires magnetic
properties after some time.

tut

south pole of the earth that lies in the

geographic north and vice-versa.

Physics

[121]

The fuse wire is made of an alloy of lead

and tin.

The resistance in electricity is analogous to friction in mechanics.

The change in the dimensions of a conductor has no effect on its conductivity,

although conductance may change.

or
.co
m

The potential across a cell in closed

circuit is less than the emf due to its
internal resistance.

Larger the current drawn from a cell,

smaller is the potential difference across it.

Energy dissipated by the cell = Elt,

where E = emf, I = current, t = time.
Energy dissipated in the external circuit
of a cell = VIt, where V = potential drop
across the cell.

The quantity in electricity that is analogues to temperature in heat is potential.

The current capacity increases, when

the cells are connected in series.

The internal resistance of an ideal cell is

zero.

The emf of voilaic cell is 1.08 V, that of

Daniel cell is 1.12 V and that of Leclanche
cell is 1.45 V.

Acid accumulator is most likely to be

damaged due to short circuiting.

tut

The resistance of an ideal voltmeter

should be infinity.
The resistance of an ideal ammeter
should be zero.

Energy is dissipated inside a cell due to

internal resistance.

ssc
ex

Fast charging does not cause sulphation

of acid accumulator, but fast discharging does it.

Thermocouple should not be used to

measure temperature above the neutral temperature.

[122]

General Science

or
.co
m

PHYSICS
AT A GLANCE

gravitational unit of force on cgs system is gram weight or gram force.

LAWS OF MOTION

According to 2nd law, the rate of change

of linear momentum of a body is directly
proportional to the external force applied
on the body, and this change takes place
in the direction of the applied force. This
law gives us a measure of force.

According to third law, to every action,

there is always an equal and opposite
reaction. This law gives us the nature
of force.

ssc
ex

1N = 105 dyne,

tut

Newtons three laws of motion form

the basis of mechanics: According to
1st law, a body continues to be in its
state of rest or of uniform motion along
a straight line, unless it is acted upon
by some external force to change the
state. The law defines force and is also
called law of inertia.

1g wt. = 980 dyne.

In free fall, a = g

From Newtons 2nd law, we obtain

i.e., external force is the product
of mass and acceleration of the body.
The absolute unit of force on SI is newton (N) and on cgs system, is dyne. The
gravitational unit of force on SI is kilogram weight or kilogram force. The

Apparent weight of man in an elevator is given by :

W = m (g + a), where mg is real weight
of the man. Acceleration is (+a), when
the lift is accelerating upwards and (a), when the lift is accelerating downwards. When lift is moving uniformly
(upwards/downwards), a = 0, W =
mg = real weight.

Inertia is inability of a body to change

by itself, its state of rest or its state of
uniform motion along a straight line.
Inertia is obviously of three types :

(i) Inertia of rest (ii) Inertia of motion,

(iii) Inertia of direction.

According to the principle of conservation of linear moment, the vector sum

of linear momentum of all the bodies in
an isolated system is conserved, and is
not affected due to their mutual action
and reaction. An isolated system is that
on which no external force is acting.
Flight of rockets, jet planes, recoiling of
a gun etc, are explained on the basis of
this principle. Newtons 3rd law of motion can also be derived from this principle and vice-versa.

W = m (g g) = 0

ie., apparent weight becomes zero.

The forces which are acting at a point

are called concurrent forces. They are
said to be in equilibrium, when their
resultant is zero.
Physics

[123]

A frame of reference in which Newtons

laws of motion hold good is called an

or
.co
m

inertial frame of references. Such a frame

is unaccelerated frame of reference.

Energy Equivalence
S.No.
1.
2.
3.

Particle
Electron or positron
Neutron or proton
Alpha particle

Mass
9.1 10-31kg
1 amu = 1.67 10-37kg
6.68 1027kg

is zero at the centre of the earth. The

value of g on the surface of earth is 9.8
ms 2.

[124]

The acceleration due to gravity (g) is

related with gravitational constant (G)
by the relation g

where M and R

are the mass and radius of the earth.

becomes zero at the centre of earth.

Gravitational Constant (G): It is equal

to the force of attraction acting between
two bodies each of unit mass, whose
centres are palced unit distance apart.
The value of G is constant throughout
the universe. It is a scalar quantity. The
dimensional formula of G.
= [M1L3T2]. The value of
G = 6.67 1011 Nm2kg2
Gravity: It is the force of attraction exerted by earth towards its centre on a
body lying on or near the surface of
earth. Gravity is the measure of weight
of the body. The weight of the body of
mass m = mass acceleration due to
gravity. The unit of weight of a body
will be the same as those of force.
Acceleration due to Gravity (g): It is
defined as the acceleration set up in a
body while falling freely under the effect of gravity alone. It is vector quantity. The value of g changes with height,
depth, rotation of earth. The value of g

ssc
ex

Newtons Law of Gravitation: It states

that the gravitational force of attraction
acting between two bodies of the universe is directly proportional to the product of their masses and is inversely proportional to the square of the distance
between them i.e, = Gm1m2/r2; where
G is the universal gravitational constant.

Gravitation is the name given to the

force of attraction acting between any
two bodies of the universle.

tut

GRAVITATION

Energy equivalent
0.53 MeV
931 MeV
3724 MeV

General Science

Gravitational Field: It is the space around

a material body in which its gravitational
pull can be experienced by other bodies.
The strength of gravitational field at a
point is the measure of gravitational intensity at that point. The intensity of gravitational field of a body at a point in the
field is defined as the force experienced
by a body of unit mass placed at that
point provided the presence of unit mass
does not disturb the original gravitational
field. The intensity of gravitational field
at a point distance r from the centre of
the body of mass M is given by
E = GM/r2 = acceleration due to gravity.
Gravitational Potential: The gravitational potential at a point in a gravitational field is defined as the amount of
work done in bringing a body of unit
mass from infinity to that point without acceleration. Gravitational potential at a point,

or
.co
m

States of Equilibrium

2. Potential energy = Minimum

Unstable
1. When displaced from
equilibrium position, particle
tends to move away from
equilibrium position.
2. Potential energy = Maximum

Gravitational potential energy of a body,

at a point in the gravitational field of
another body is defined as the amount
of work done in bringing the given body
from infinity to that point without acceleration.

Inertial mass of a body is defined as the

force required to produce unit acceleration in the body.

Gravitational mass of a body is defined

as the gravitational pull experienced by
the body in a gravitational field of unit
intensity.

Inertial mass of a body is identical to the

gravitational mass of that body. The main
difference is that the gravitational mass
of a body is affected by the presence of
other bodies near it. Whereas the inertial
mass of a body remains unaffected by the
presence of other bodies near it.

ssc
ex

Satellite : A satellite is a body which is

revolving continously in an orbit around
a comparatively much large body.

2. Potential energy = Constant

When the satellite is orbiting close to

the surface of earth i.e., H < < R, then

(ii) Time period of Satellite (T) : It is

the time taken by satellite to complete one revolution around the
earth.

Gravitational potential energy = gravitational potential mass of body.

Neutral
1. Particle always remains in the
state of equilibrium
irrespective of any displacement.

tut

Stable
1. When displaced from
equilibrium position,
tends to come back

(i) Orbital velocity of a satellite is the

velocity required to put the satellite
into given orbit around earth. Orbital velocity of satellite, when it is
revolving around earth at height h
is given by

Geostationary Satellite: A satellite

which revolves around the earth with
the same angular speed in the same
direction as is done by the earth around
its axis is called geostationary or geosynchronous satellite.

The height of geostationary satellite is =

36000 km and its orbital velocity =
3.1kms 1.

Polar Satellite: It is that satellite which

revolves in polar orbit around earth i.e.,
polar satellite passes through geographical north and south poles of earth
one per orbit.

Escape Velocity: The escape velocity

on earth is defined as the minimum
velocity with which a body has to be
projected vertically upwards from the
surface of earth (or any other planet) so
that it just crosses the gravitational field
of earth (or of that planet) and never
returns on its own. Escape velocity ve is
given by.

Physics

[125]

or
.co
m

For earth, the value of escape velocity is

11.2 kms1.
For a point close to the earths surface,
the escape velocity are related as

Weightlessness: It is a situation in
which the effective weight of the body
becomes zero.

Keplers Law of Planetary Motion:

where R is the semi major axis of the

elliptical orbit of the planet around the
sun.

(i) Keplers First Law (Law of Orbit):

Every planet revolves around the
sun in an elliptical orbit. The sun is
situated at one focus of the ellipse.

(iii) Keplers Third Law (Law of Period) : The square of the time period of revolution of a planet around
the sun is directly proportional to
the cube of semi-major axis of the
elliptical orbit i. e., T2 R3.

tut

(ii) Keplers Second Law (Law of

Area): The radius vector drawn
from the sun to a planet sweeps out
equal areas in equal intervals of time
i.e, the areal velocity of the planet
around the sun is constant.

Conservative and Non-conservative Force

ssc
ex

S. Conservative Forces
1. Work done by/against such forces in
displacing a particle does not depend upon
the path along which particle is displaced.
2. Work done by/against such forces in
displacing a particle around a closed path is
zero.
3. K.E. of particle remains constant

Molecular forces are weaker than

interatomic forces.

SOLID & LIQUID

Intermolecular Forces : These are those

forces which are acting between the
molecules due to electrostatic interaction
between the charges of the molecules.
These forces are also of electrical origin
and are active between the molecules
whose separation is of the order of
molecular size (= 109m).

Interatomic Forces : These are those

forces which are acting between the
atoms due to electrostatic interaction
between the charges of the atoms. These
forces are electrical in nature and are
active between the atoms if the distance
between them is of the order of atomic
size (= 1010m.)

[126]

General Science

Crystalline Solids : These are solids

which have a definite external
geometrical
form
and
whose
constitutent atoms/ions/molecules are
arranged in a definite pattern in three
dimensions within the solid.
Examples, are quartz, calcite, rocksalt,
sugar, mica, diamond, etc.

Non Conservative Forces

Work done by/against such forces in
displacing a particle depends upon the path
along which particle is displaced.
Work done by/against such forces in
displacing a particle around a closed path is
NOT zero.
K.E. of particle changes.

Crystalline solids have sharp melting

point and they are anisotropic in
behaviour.

Amorphous Solids : These are those

solids which have no definite external
geometrical
form
and
whose
constitutent atoms/ions/molecules are

dimensional formula is [M1L1T2].

Stress can be of two types :

Examples. Rubber, glass, plastic,

cement, paraffin, etc. Crystalline solids
do not have sharp melting point and
they are isotropic in behaviour.

(i) Normal stress

Deforming Force : It is that force which

when
applied,
changes
the
configuration of the body.

Elasticity : It is the property of the body

by virtue of which the body regains its
original configuration (length, volume
or shape) when the deforming forces are
removed.

stress = restoring force/area.

According to Newtons third law of

motion, the restoring force is equal and
opposite to the external deforming force
applied, when there is no permanent
change in the configuration of the body.
Thus,

ssc
ex

Strain : It is defined as the ratio of

change in configuration of the deformed
body due to a deforming force on it to
the original configuration of the body
i.e.,

Strain can be of three types :

(i)

Longitudinal strain

(ii) Volumetric strain

Stress : The internal restoring force

acting per unit area of a deformed body
is called stress i.e.,

(ii) Tangential stress.

tut

or
.co
m

not arranged in a defintie pattern in

three dimensions within the solid.

(iii) Shearing stream

Hookes Law : It states that the extension produced in the wire is directly
proportional to the load applied within
the elastic limit. Hooks law also states
that the stress is directly proportional
to strain within the elastic limit.

Modulus of Elasticity or Coefficient of

elasticity of a body is defined as the ratio
of the stress to the corresponding strain
produced, within the elastic limit.

Stress is a Tensor Quantity: Its S.I. unit

is Nm2 and c.g.s unit is dyne/cm2. Its

Modulus of elasticity is of three types :

Elastic and Inelastic Collisions

(i) Youngs Modulus of Elasticity (Y):

It is defined as the ratio of normal
stress to the longitudinal strain
within the elastic limit i.e.,

3.
4.
5.

Perfectly elastic collision

Particles do not stick after collision.
Rel. vel. of separation after collison = rel.
vel. of approach before collision.
Coeff. of restitution, e = 1
Linear momentum is conserved
K.E. is conserved

1.
2.

Perfectly Inelastic collisions

Particles stick after collision.
Rel vel. of separation after collision is zero.

3.
4.
5.

Coeff. of restitution e = 0
Linear momentum is conserved
K.E. is not conserved

(ii) Bulk Modulus of Elasticity (K) : It

Physics

[127]

Where Shearing strain is defined as the

angle through which a line perpendicular to the fixed face gets rotated under
the effect of a tangential force acting on
the opposite face of the body.

The S.I. units of modulus of elasticity of

Y or K or is Nm2 or Pa and c.g.s. unit
is dyne/cm2. The dimensional formula
= [M1L1T2].

Elastomers : These are those materials

for which stress and strain variation is
not straight line within elastic limit and
strain produced is much larger than
the stress applied. Such materials have
no plastic range. Example is rubber.
Elastic after Effect : The temporary
delay in regaining the original configuration by the elastic body after the removal of a deforming force is called

Elastic-Fatigue : It is the property of

the elastic body by virtue of which its
behviour becomes less elastic under the
action of repeated alternating deforming forces.

Breaking force = breaking stress area

of cross section of the wire.
Breaking stress is fixed for a material
but breaking force will vary, depending on area of cross-section of the wire.

Elastic Potential Energy in a Stretched

Wire: Elastic potential energy per unit
volume of the stretched wire is,

Thrust: The total normal force exerted

by liquid at rest on a given surface in
contact with it is called thrust of liquid
on that surface.

Pressure of Liquid or Hydrostatic Pressure (P): It is defined as the thrust acting per unit area of the surface
incontact with liquid i.e.,

Brittle Materials : These are those material which show very small range beyond elastic limit. For such materials,
the breaking point lies close to the elastic limit. Examples are cast iron, glass
etc.

Ductile Materials : These are those

materials which show large plastic
range beyond the elastic limit. Examples
are copper, silver, iron, aluminium, etc.

ssc
ex

or
.co
m

(iii) Modulus of Rigidity () : It is defined as the ratio of tangential stress to

the shearing strain, within the elastic
limit i.e.,

elastic after effect. It is least for quartz

or phosphor bronze.

tut

is defined as the ratio of normal

stress to the volumetric strain within
the elastic limit i.e.,

[128]

General Science

S.I. unit of P is Nm2 or pascal (denoted

by Pa). Pressure is a scalar quantity.

Pascals Law : It states that if gravity

effect is neglected, the pressure at every
point of liquid in equilibrium of rest is
same. Pascals law also states that the
increase in pressure at one point of the
enclosed liquid in equilibrium of rest is
transmitted equally to all other points
of liquid provided the gravity effect is
neglected.

Archimedes Principle : It states that

when a body is immersed partly on
wholly in a liquid at rest it loses some of
its weight, which is equal to the weight
of the liquid displaced by the immersed
part of the body. Observed weight of the
body in a liquid = true weighh - weight
of liquid displaced.
Law of Floatation: It states that a body
will float in a liquid if weight of the
liquid displaced by the immersed part
of the body is atleast equal to or greater
than the weight of the body.

S.I. unit of surface tension is Nm1 and

c.g.s unit is dyne/cm. Surface tension
is a scalar quantity as it has no specific
direction for a given liquid.

Surface energy = surface tension area

of the liquid surface.
(i) Excess of pressure inside a liquid
drop.
p = 2 S/R
(ii) Excess of pressure inside a soap
bubble,
p = 4 S/R
where S is the surface tension and R is
the radius of the drop or bubble.

Angle of Contact : The angle of contact

between a liquid and a solid is defined
as the angle enclosed between the
tangents to the liquid surface and the
solid surface inside the liquid, both the
tangents being drawn at the point of
contact of the liquid with the solid. The
value of angle of contact is less than 90
for a liquid which wets the solid surface
and is greater than 90 if a liquid does
not wet the solid surface.

or
.co
m

Atmospheric Pressure : The pressure

exerted by atmosphere is called
atmospheric pressure. At S.T.P. the
value of atmospheric pressure is
1.01105 Nm2 or 1.01 106 dyne/cm2.

tut

Molecular Range : It is the maximum

distance upto which a molecule can
exert some measurable attraction on
other molecules. The order of molecular
range is = 109m in solids and liquids.

Sphere of Influence : It is a sphere

drawn with molecule as centre and
molecular range as radius.

ssc
ex

Surface Film : It is the top most layer of

liquid at rest with thickness equal to the
molecular range.

Surface Tension : It is the property of

the liquid by virtue of which the free
surface of liquid at rest tends to have
minimum surface area and as such it
behaves as a stretched membrane.
Quantitatively surface tension.

where F is the force acting on the imaginary line of length l, drawn tangentially to the liquid surface at rest.

Capillarity : The phenomenon of rise

or fall of liquid in a capillary tube is
called capillarity. The height (h) through
which a liquid will rise in a capillary
tube of radius r which wets the sides of
the tube will be given by

where S is the surface tension of liquid,

is the angle of contact, is the density
of liquid and g is the acceleration due
to gravity.
Surface tension of a liquid/water
decreases with rise of temperature or
when a detergent is dissolved in it.
Physics

[129]

The Viscosity of Liquid decreases with

increase in Temperature : The viscosity of gases increases with the increas
in temperature. With the increase in
pressure, the viscosity of liquid increases
but of water decreases where as of gases
remains unchanged.

Stream line flow of a liquid is that flow

in which every particle of the liquid
follows exactly the path of its preceding particle and has the same velocity
in magnitude and direction as that of
its preceding particle while crossing
through that point. A stream line flow
is accompanied by stream lines of liquid.

or
.co
m

Turbulent Flow : It is that flow of liquid,

in which a liquid moves with a velocity
greater than its critical velocity. The motion of the particles of liquid becomes
disorderly or irregular.

Critical Velocity : It is that velocity of

liquid flow, upto which the flow of liquid is a streamlined and above which
its flow becomes turbulent.

Reynolds Number : It is pure number which determines the nature of

flow of liquid through a pipe. Quantitatively, Reynolds number NR is given
by

Stokes Law : It states that the backward dragging force F acting on a small
spherical body of radius r, moving
through a medium of viscosity , with
velocity v is given by
F = 6 rv.

tut

Viscous drag F acting between two layers of liquid each of area A, moving
with velocity gradient dv/dx is given
by
F = dv/dx
where is the coefficient of viscosity, and
its c.g.s unit is poise or dyne cm2 sec.

called a laminar flow. In this flow, one

layer slides over the other layer of liquid.
The velocity of liquid flow is always less
than the critical velocity of the liquid.

Viscosity : Viscosity is the property of

a fluid (liquid or gas) by virtue of which
an internal frictional force or viscous
drag comes into play when the fluid is
in motion and opposes the relative motion of its different layers. The coefficient of viscosity of liquid is defined as
the tangential force (= backward viscous drag) required to maintain a unit
velocity gradient between two layers of
fluid each of unit area.

ssc
ex

Laminar Flow : That steady flow in which

the liquid moves in the form of layers is

[130]

General Science

where is the coefficient of viscosity of

liquid, g is the density of liquid. D is the
diameter of the tube and ve is the critical velocity of liquid flowing through
the tube. For streamline or laminar flow,
the value of NR is less than 2000 and for
turbulent flow the value of NR is more
than 3000. For NR in between 2000 to
3000, the flow is uncertain.
Equation of continuity, a v = a constant
of v 1/a.
i.e., deep water runs slow.
Bernoulli Theorem : It states that for
the stream line flow of an ideal liquid,
the total energy (the sum of pressure
energy, the potential energy and kinetic
energy) per unit volume remains constant at every cross-section throughout
the tube i.e.,

= another constant

Here,

= pressure head

h = potential head

vel. v is made to stop,

and

If temperature of a body of mass m

rises by T, then Q = m L, where L is
latent heat of the body.

Temperature on Celcius Scale: Fahrenheit scale, Reumer scale and Kelvin

scale are related as:

The Bernoullis Theorem, also states that

in a stream line flow of an ideal liquid
through a horizontal tube, the velocity
increases where pressure decreases and
vice-versa.

tut

= velocity head.

= a constant

ssc
ex

Torricellis Theorem : It states that the

velocity of efflux i.e., the velocity with
which the liquid flows out of an orifice
(i.e., a narrow hole) is equal to that
which a freely falling body would acquire in falling through a vertical distance equal to the depth of orifice below the free surface of liquid. Quantita
tively velocity of efflux,
, where
h is the depth of orifice below the free
surface of liquid.

Various Thermometers used for measuring unknown temperatures are :

Jollys constant volume air thermometer; Platinum resistance therometer;
Thermoelectric thermometer; radiation
Pyrometer.

All Solids expand on Heating: The

coefficient of linear expansion, coefficient of superficial expansion and coefficient of cubical expansion are related
as

Thermal capacity of a body is the

amount of heat required to raise its temperature through one degree Q = mc.
From here, we may define specific heat
of a body as the heat capacity per unit
mass of the body.

Water Equivalent of a body is the mass

of water which absorbs or emits the
same amount of heat as is done by the
body for the same rise or fall in temperature. It is represented by w = mc.

HEAT

When a body of mass m falls under

gavity through a height h, then W =
mgh.
When a body of mass m, moving with a

If the liquid is flowing through a horizontal tube, then h is constant.

Bernoullis Theorem states that

or
.co
m

or,

The ratio of work done (W) to the

amount of heat produced (Q) is always

a constant, represented by J. i.e.,

where J is called Joules mechanical
equivalent of heat. The value of
J = 4.186 joule/calorie.

Physics

[131]

The value of gas constant r for different

gases is different.

Ideal Gas or Perfect Gas: It is that gas

which strictly obeys gas laws. for such
a gas, the size of the moelcules of a gas
is zero and there is no force of attraction or repulsion amongst its molecules.

Assumptions of Kinetic Theory of

Gases:

Heat lost = Heat gained.

1. Specific heat of a constant volume (cv)

2. Specific heat of a constant pressure (cp)

Boyles Law: It states that the volume

V of the given mass of a gas is inversely
proportional to its pressure P, when
temperature is kept contant i.e. V = 1/
P or V = K/P

ssc
ex

A gas consists of a very large number

of molecules which are perfectly elastic spheres and are identical in all
respects for a given gas and are different for different gases.

(ii)

The molecules of a gas are in a state of

continous, rapid and random motion.

(iii) The volume occupied by the molecules

is negligible in comparison to the volume of the gas.
(iv) The molecules do not exert any force
of attraction or repulsion on each other,
except during collision. on each other,
except during collision.

PV = K a constant.

(v)

Charles Law: It states that the pressure remaining constant, the volume of
the given mass of a gas is directly proportional to its kelvin temperature i.e.,
V T if P is constant.

(vi) Molecular density is uniform throughout the gas.

Standard gas equation, PV = nRT

where n is the number of moles contained in the given ideal gas of volume
V, pressure P and temperature TK.

Gas Constant: R is a universal gas constant and r is a gas constant for 1 gram
of a gas. The universal gas constant is
defined as the work done by (or on) a
gas per mole per kelvin i.e.,

(i)

tut

Specific Heat of Gases : Specific heat

of a gas is the amount of heat required
to raise the temperature of one gram of
gas through 1C. As the gas can be
heated under different conditions, and
different amounts of heat is required in
each case, therefore, a gas does not possess one single value of specific heat.
Out of many values of specific heat of a
gas, two are important. These are called
two principal specific heats of a gas :

or
.co
m

When two substances at different temperature are mixed together they exchange heat. If we assume that no heat
is lost to the surroundings, then according to principle of calorimetry,

[132]

General Science

The collision of the molecules with

themselves and with the walls of the
vessel are perfectly elastic.

(vii) A molecule moves along a straight

line between two successive collisions.
(viii) the collisions are almost instantaneous.

Pressure exerted by a Gas : It is due to

continous bombardment of gas molecules against the walls of the container
and is given by the relation.

where C is the r.m.s. velocity of gas

molecules.

Positive
electrode
Negative
electrode
Electrolyte

Daniel Cell
Copper
vessel
Zinc rod

Leclanche Cell
Carbon rod

dil H2SO4

NH4Cl solution

Depolariser CuSO4
solution

Zinc rod

Manganese
dioxide

Dry Cell
Carbon rod
with brass cap
Zinc vessel
Paste of NH4Cl and
saw dust
Manganese
dioxide

Average K.E. per molecule of a gas

. It is independent of the

Absolute Zero : It is that temperature

at which the root mean square velocity
of the gas molecules reduces to zero.

Thermodynamical System : An assembly of extremely large number of particles (such as gas molecules in a container) is called a thermodynamical system. Such a system has a certain value
of pressure P, volume V and temperature T and heat content Q. These are
called Thermodynamical parameters.

dQ = dU + dW

where dQ is the small amount of heat

energy given to a system, dU is small
increase in internal energy of the system and dW is the small external work
done by the system.

ssc
ex

The equation of state of gaseous phase

of a substance is PV = n RT where n is
number of moles of the gas.

The other two phases are solid phase

and liquid phase.

Intermolecular potential energy of a real

gas is a function of its volume. K.E. of
gas molecules is a function of its velocity and hence the temperature T.
K.E./molecules
Boltzmanns constant.

where k is

Thermodynamical Operations : Isothermal Changes are the changes in

pressure and volume of the system
when temperature is kept constant. Free
exchange of heat between the system
and the surroundings is allowed. The
container must be perfectly conducting
and the changes must be brought about
slowly.
Equation of isothermal changes is PV =
constant or P2V2 = P1V1

Adiabatic Changes are the changes in

pressure and volume of the system,
when heat content of the system is kept
constant. No exchange of heat is allowed between the system and the surroundings. The container must therefore be perfectly insulating and the
changes must be sudden.

Second Law of Thermodynamics states

that it is impossible for self-acting machine, unaided by an external agency
to convey heat from the body at lower
temperature to another at higher temperature. This statement of the law was
made by Calusius.

Internal Energy of a Gas is the sum of

kinetic energy and the intermolecular
potential energy of the molecules of the
gas.

First Law of Thermodynamics is restatement of the principle of conservation of

energy as applied to heat energy. According to this law

tut

mass of the gas but depends upon the

temperature of the gas.

or
.co
m

In an ideal gas, intermolecular forces

do not exist. Therefore, it possesses no
intermolecular potential energy. Thus
internal energy of an ideal gas is wholly
kinetic.

Cell Profile

Physics

[133]

Heat Engines : A heat engine is a device which converts heat energy into
mechanical energy. Efficiency of a heat
engine is the ratio of useful work done
(W) by the engine per cycle to the heat
energy absorbed from the source (Q1)
per cycle.

A Refrigerator or a Heat pump absorbs

heat Q2 from a sink at lower temperature T2K. The sink is the substance to
Cell Chemistry

In charged
Positive
electrode
Negative
electrode

Electrolyte
KOH + 1%

Lead Accumulator
Perforated lead
plates coated with
PbO2
Perforated lead
plates coated with
pure lead
Dil. H2SO4

Alkali Accumulator
Perforated steel
plate coated with
Ni(OH)4
Perforated steel
plate coated with Fe
20% solution of
LiOH

be cooled. Heat absorbed from the sink

is rejected to the source (i.e., surrounding air) at high temperature T1K. Electric energy W has to be supplied for this
purpose Q1 = Q2 + W.

where Q2 is the heat rejected to the sink

Power of a steam engine = 2 PLAN
(watt)

or
.co
m

high temperature T 1 K and Q 2 is

amount of heat energy rejected to the
sink at constant low temperature T2K.

tut

According to Kelvin, it is impossible to

derive a continuous supply of work by
cooling a body to a temperature lower
than that of the coldest of its surroundings.

ssc
ex

where P is the pressure of steam measured in Nm2, L is

half the length of the stroke in metre,
A is area of cross section of the piston
in m2 and N is number of strokes per
second.

Coefficient of performance (C.O.P.) of

a refrigerator is the ratio of the heat
absorbed from the sink (Q2) to the electric energy supplied (W) for this purpose per cycle i.e.,

Steam engine is an external combustion engine. There are internal combustion engines like petrol engine and diesel engine. These are four stroke engines.
Carnot engine is an ideal heat engine
which is based on Carnots reversible
cycle. Its working consists of four steps
viz. isothermal expansion, adiabatic
expansion, isothermal compression
and aidabatic compression. The effficiency of Carnot engine is given by

where Q1 is heat energy absorbed from

the source maintained at a constant

[134]

General Science

i.e.,

Transfer of Heat: Three modes of transfer of heat are : conduction; convection; and radiation. Coefficient of thermal conductivity (K) of a solid conductor is calculated from the relation.
,
where A is area of hot face, x is distance between the hot and cold faces,

roundings provided the temperature difference is small (= 30C). i.e., E (T T0)

ence in temperature of hot and cold

faces.

All liquids and gases are heated by convection. Heat comes to us from the sun
by radiation.
Wiens Displacement Law : It states
that the wavelength (m) corresponding to which energy emitted by a perfectly black body is maximum is inversely proportional to the temperature
(T) of the black body i.e.,

It is a branch of science that deals with

the study of position, composition, motion and other related facts of heavenly
bodies.

Windows of Astronomy : The visible

light and radio waves coming from the
heavenly bodies are two windows to
study about the sun, stars i.e., about
the universe, hence called windows of
the astronomy.

where b is a constant of proportionality

and is called Wiens constant. Its value
is b = 2.898 103 mK.

Stefans Law : It states that the total

amount of energy radiated per second
per unit area of a perfectly black body
is directly proportional to the fourth
power of the absolute temperature of
the body i.e., E T4 or E = T4 where
is called Stefans constant. Its value is
= 5.67 108 watt m2K4

ssc
ex

In case a perfectly black body at temperature T is placed in an enclosure at

temperature T0, then net amount of energy radiated per second per unit area by
the black body is given by E = (T4 - T04 )

Main constitutents of universe are: (i)

Solar system (ii) Stars (iii) Galaxies.

Solar System : It is the name given to

the family of sun. Our solar system consists of sun, nine planets (Mercury, Venus, Earth, Mars, Jupiter, Saturn, Uranus, Neptune, Pluto) orbiting around
the sun, satellites (or moons) orbiting
around the planets, asteroids, comets
and meteroids.

Direction and time period of revolution of a planet about its axis: The
sense of rotation of all the planets (except
for Venus and Uranus) is normally from
west to east. For Venus and Uranus, the
sense of rotation is east to west and is
called retrograde. Our earth rotates about
its north axis to south axis from west to
east in 23 hrs. and 58.1 minutes.

Surface Temperature of a Planet : It

can be estimated by two methods.

If the body and enclosure are not perfectly black and have relative emissivity we, may rewrite.

Newtons Law of Cooling : It states

that the rate of loss of heat of a liquid is
directly proportional to difference in
temperature of the liquid and the sur-

Universe : The limitless expanse of

space around us consisting of solar system, stars, galaxies etc. is called universe.

ASTRONOMY

tut

Here (T/x) temperature gradient i.e.,

rate of fall of temperature with distance in the direction of flow of heat.

or
.co
m

Q is the small amount of heat conducted in a small time (x), T is differ-

(i) Using Stefans law, i.e, E = s T4

Physics

[135]

or
.co
m

where E is the thermal energy emitted per second per unit area of the
planet and T is its surface temperature, s is the Stefans constant.

(i) There should be suitable temperature range as required for the life to
exist on a planet.
(ii) There should be proper atmosphere
free from poisonous gases.

(ii) Using Wiens Displacement law.

Existence of Atmosphere on a Planet :

The existence of atmosphere on a planet
can be decided by two factors :

These conditions donot exist on any

other planet except our earth.
Hence, the life is not possible on
any other planet except earth.

(i) Acceleration due to gravity; and

(iii) There should be plenty of water.

tut

mT = b.
where m is the wavelength corresponding to maximum intensity of radiation
emitted from the black body at temperature T and b is the Wiens constant.

(ii) Surface temperature of the planet.

Chemical Composition of Atmosphere:

The spectrum of the radiations emitted
by a planet helps us to decide the nature of the gases present in the atmosphere of a planet. In the spectrum,
dark lines correspond to particular elements present in the atmosphere of that
planet and intensity of the line tells
about the relative abundance of the element.

ssc
ex

The planets like Mercury, Mars and

Pluto have large value of acceleration
due to gravity but they have high temperature also. With the increase in temperature, the average velocity of the
gas molecules increases and becomes
more than their escape velocities. Due
to this, the gas molecules have escaped
one by one and there is no atmosphere.

Atmosphere of earth consists of 88%

nitrogen, 21% oxygen with some
carbondioxide and water vapour.

Basic conditions for the existence of life

on a planet are :

[136]

General Science

(ii) Surface energy of the sun is due to

fusion process taking place inside
the sun, in which certain mass disappears and equivalent amount of
energy is produced. The fusion reaction can be represented as
41H1 2He4 + 1e0 + 26.7 MeV

Stars : A star is a fiery luminous body

which emits light of its own. After sun
the next nearest star to earth is Alpha
centauri. Its distance is 4.3 light years.

Brightness of a Star : The brightness of

a star is expressed through the system
of magnitude. Whereas the observed
magnitude of a star is the measure of its
brightness when observed from the

or
.co
m

earth and absolute magnitude of a star

is the measure of its brightness at 10
per second distance.

out the major portion of its mass into

interstaller space. This is the death of a
star. The core left behind may end in
three ways:

Steller Spectra : The different stars are

of different colours and the spectrum
of a star is related to its colour. There
are seven classes of stellar spectra denoted by letters O,B, A, F, G, K and M.

(i) If the original mass of a star is less

than two times the mass of the sun,
a white dwarf is produced. When it
ceases to emit light, it becomes black
dwarf.

Our sun belongs to G class star.

(ii) If the original mass of a star is between 2 to 5 times the mass of the
sun, neutron star is produced.

tut

Birth of a Star : When the interstellar

dust and gas particles come closer to
form a cloud due to gravitational force
of attraction between them, the birth of
a star begins if the original cloud has a
mass of at least one thousand solar
masses. As the particles of cloud come
closer, the gravitational attraction increases. As the contraction of the cloud
continues, the pressure and temperature of the cloud continues, the pressure and temperature inside the cloud
rise. At a certain stage, the cloud breaks
up into large number of fragments of
smaller size and each fragment continues to shrink and its temperature continues to rise. When the temperature of
a fragment reaches millions of degrees,
nuclear fusion begins to take place due
to which the fragment begins to radiate
light energy from its surface and it becomes a star.

(iii) If the original mass of a star is more

than 5 times the solar mass, the
black hole is produced.

Death of a Star : In each born star,

during the fusion process, the hydrogen
is converted into helium. When the content of hydrogen of a star decreases to a
certain proportion, the core begins to
contract while the outer regions expand.

ssc
ex

As a result, the surface temperature of

star drops and the star becomes giant or
supergiant star. At the end, this star
produces energy at a very high rate to
such an extent that it explodes in the
form of nova or supernova, throwing

Milky Way or Akash Ganga : It is the

name of the galaxy to which our earth
belongs. The milky way is the glowing
belt of the sky formed by the combined
light of a very large number of stars. It
is called milky way or Akash Ganga
because the light from the various stars
together gives the impression of a stream
of milk flowing across the sky.
Milky way is a spiral galaxy. Its mass is
150 solar masses.

Quasars : These are quasi-stellar Radio

sources. Quasars are situated at very
large distance from our solar system
and are further receding away with a
speed of 0.9 times the speed of light.

Pulsars : These are radio sources which

emit radio signals at extremely regular
intervals of time. Their origin is due to
neutron star.

Hubbles Law : It states that the red

shift (z) is directly proportional to the
distance (r) of the galaxy from us i.e., z
r but

Physics

[137]

where H is called Hubbles constant.

The quantity (l/H) has the dimensions
of time. Hubbles law helps us to estimate the age and evolution of the universe. The value of Hubbles constant is
16 Km-s-1 per million light year.

A basic communication system consists

of information source, transmitter, receiver and the link between transmitter
and receiver.

Modulation is the process of super-imposing an audio frequency signal over

a radio frequency carrier wave. Three
types of modulation are : amplitude
modulation (AM), frequency modulation (FM) and pulse modulation (PM).
In AM, amptitude of high frequency
carrier wave is made proportional to
the instanteneous amplitude of the audio frequency modulating voltage.

In FM, frequency of carrier wave is

varied in accordance with the instantaneous value of the modulating voltage. However, the amplitude
of the carrier wave is kept constant.

Modulation index (m1) of FM wave is

defined as the ratio of maximum frequency deviation to the modulating frequency.
Frequency modulation is more advantageous compared to the amplitude
modulation.

The analog pulse modulation is of two

types : pulse amplitude modulation
(PAM) and pulse time modulation
(PTM).
The digital pulse modulation is also of
two types : pulse code modulation
(PCM) and pulse delta modulation
(PDM).

Demodulation is the reverse process of

modulation which is performed in a
receiver to recover the original modulating signal. Tuned frequency receiver
(TRF) and superheterodyne receives are
commonly used for demodulation.

All modes of long distance communication have been superceded by communication through electrical signals,
as they can be transmitted at extremely
high speeds (3 108 m/s).

ssc
ex

Pulse modulation is a system in which

continous wave forms are sampled at
regular intervals. Information regarding the signal is transmitted only at the
sampling times together with any synchronizing pulses that may be required.

tut

INFORMATION TECHNOLOGY

or
.co
m

[138]

General Science

Data transmission is through a modulator and data retrieval is through a

demodulator.

A modem is a modulating and demodulating device that connects one computer to another across ordinary telephone line.

Fax or facsimile telegraphy is the electronic reproduction of a document at a

distance.

The term space communication refers

to the sending, receiving and processing of information through space. The
information in the term of sound waves
can be sent from one place to another
place by superimposing it on undamped
electromagnetic waves of high frequency called carrier waves. The resulting wave so produced is called
modulated wave which can travel
through space; with the velocity of light.
Our earths atmosphere helps in the
propagation of electromagnetic waves.

The electromagnetic waves of frequency

ranging from a few kilo hertz to about
a few hundred mega hertz (i.e., wavelength 0.3 m or above) are called radio
waves.

It is that highest frequency of radiowaves

which when sent at some angle towards
the ionosphere gets reflected from that
and returns to the earth.

Skip Distance : It is the smallest distance from a transmitter along the

earths surface, at which a sky wave of
a fixed frequency, but more than critical frequency is sent back to the earth.

Fading : It is the variation in the strength

of a signal at a receiver due to interference of waves. Fading is more at high
frequencies.

Space Wave Propagation : The space

waves are the radio waves of very high
frequency (i.e., between 30 MHz to 300
MHz or more). The space waves can
travel through atmosphere from transmitter antenna to receiver antenna either directly or after reflection from
ground in the earths troposphere
region. The space wave propagation is
also known as line of sight propagation.
The range of space wave propagation
can be increased by using repeaters at
suitable distances from each other on the
surface of the earth. The space wave
propagation is utilizing radio waves of
very high frequency (between 30 MHz
to 300 MHz), ultra high frequency and
microwaves. They are used in television
signal propagation and microwave
propagation.

(ii) Sky wave propagation.

(iii) Space wave propagation.
The radiowaves which travel through
atmosphere following the surface of the
earth are known as ground waves or
surface waves. The maximum range of
ground or surface wave propagation
depends on (i) the frequency of the radio waves; and (ii) power of the transmitter. The ground wave propagation
is suitable for low and medium frequency (i.e. upto 2MHz only).

The radiowaves of frequency ranging

from 2 MHz to 30 MHz are called sky
waves. They can propagate through atmosphere and are reflected back by the
ionosphere layer of earths atmosphere.
Since these waves travel through sky,
their propagation is known as sky wave
propagation.

Criticial Frequency (CF) : It is that

highest frequency of radiowave which
when set straight (i.e., normally) towards the layer of ionosphere gets reflected from ionosphere and returns to
the earth. If the frequency of radiowaves
is more than the critical frequency, it
will not be reflected by ionosphere.

ssc
ex

tut

The radiowaves emitted from a transmitter antenna can reach the receiver
antenna by following any of the following modes of propagation :
(i) Ground wave or surface wave
propagation.

or
.co
m

Maximum Usable Frequency (MUF) :

Satellite Communication : It is a mode

of communication of a signal between
transmitter and receiver through satellite. The satellite communication is like
the line-of-sight microwave communication. A geostationary satellite is used
for satellite communication. The present
Indian communication satellites are
INSAT 2B and INSAT 2C.
Physics

[139]

Most commonly used wire communication

lines are :

surrounded by a cladding of material

of refractive index slightly less than that
of core and a protective jacket of insulating material. There are three types of
optical fibre configurations:
(i) Single mode step-index fibre.

(ii) Multi-mode step-index fibre.

(iii) Multi-mode graded-index fibre.

(ii) Twisted pair wire lines; and

(i) Gas lasers (ii) Liquid lasers (iii) Solid

lasers (iv) Semiconductor lasers.

(iii) Co-axial wire lines (unbalanced

lines).

Energy is dissipated in a transmission

line in three ways : Radiation losses,
conductor heating & the dielectric heating.

A co-axial cable system consists of a

tube carrying a number of co-axial
cables together with repeaters and
other ancilliary equipment.

Light Modulation: It is achieved by two

ways :
(i) Direct modulation (ii) Indirect or external modulation. Direct modulation
suffers from system degradations but
indirect or external modulation does
not.

LIGHT
Light is a form of energy which produces the sensation of sight.

A telephone link can be established

using ground waves, sky waves, micro waves, co-axial cables and the latest optical fibre cables.

Speed of light in vacuum/air = 3 108

ms 1

Luminous Body : A body which emits

light of its own. For example, the sun.

Optical Communication : It is a system

of communication by which we transfer the information over any distance
through optical range of frequencies.
The light frequencies used in fibre optical system are in between 1014 Hz to 4
1014 Hz. (i.e. 100,000 to 400,000 GHz.).

Non-luminous Body : A body which

does not emit light of its own but reflect
the light falling on it. For example, the
moon.

Medium : Any substance through which

light may or may not pass is called medium.

Transparent Medium : A medium

ssc
ex

Laser: Laser stands for light amplification by stimulated emission of radiation.

The working of laser is based on stimulated emission of radiation. The following types of laser are used:

(i) Parallel wire line, (balanced lines)

or
.co
m

Remote Sensing : It is a technique which

is used to observe and measure the characteristics of the object with respect to
its location, size, colour, nature, etc. It
is related with measuring some kind of
energy which is emitted, transmitted or
reflected from the object. Remote sensing systems provide us the data critical
to weather prediction, agriculture forecasting, resource exploration and environmental monitoring. The Indian remote sensing satellites are IRS-1A, IRS
1B and IRS-1C.

tut

Optical Fibre: It consists of a central

core made of glass or plastic which is

[140]

General Science

or
.co
m

mirrors inclined to each other at an angle

through which light can pass is called

transparent medium.
For example : Air, glass, clean water.

Translucent Medium : A medium

through which only some parts of light
can pass is called translucent medium.

Periscope : A periscope is a device used

to see the objects from a lower level.

Concave Mirror : Concave mirror is a

part of a hollow sphere whose outer
part is silvered and the inner part is
reflecting surface.

Convex Mirror : Convex mirror is a part

of a hollow sphere whose outer part is
reflecting surface and inner part is silvered.

Centre of Curvature : The centre of hollow sphere of which the spherical mirror forms a part is called centre of curvature. It is denoted by C.

Opaque Medium : A medium through

which light cannot pass .
For Examples : Wood, stone, brick, iron,
etc.
Ray of Light : A line drawn in the direction of propagation of light is called ray
of light.

Reflection of Light : The phenomenon

of returning of light in the same medium
after striking a surface is called reflection of light.

tut

For example : Greased paper, butter paper, ground glass, paraffin wax, etc.

Radius of Curvature : The radius of

hollow sphere of which the spherical
mirror forms a part is called radius of
curvature. It is denoted by R.

(i) Regular reflection (ii) Irregular reflection.

Pole : The mid point of a spherical mirror is called its pole. It is denoted by P.

Reflector : A surface which reflects the

light falling on it is called a reflector or a
reflecting surface.

Aperture : The part of the spherical mirror exposed to the incident light is called
the aperture of the mirror.

Laws of Reflection : The reflection of

light from a surface obeys certain laws
called laws of reflection.

Principal Axis : A line joining the centre of curvature (C) and pole (P) of a
spherical mirror and extended on either
side is called principal axis.

Principal Focus : A point on the principal axis of a spherical mirror where the
rays of light parallel to the principal axis
meet after reflection from the mirror is
called principal focus. It is denoted by F.

Focal Plane: A plane normal or perpendicular to the principal axis and passing
through the principal focus (F) of the
spherical mirror is called focal plane.

Types of Reflection :

ssc
ex

(i) Incident angle is equal to the reflected

angle i.e. i = r.
(ii) Incident ray, reflected ray and normal to the reflecting surface lie in the
same plane.

Lateral Inversion : The exchange of the

right and left side of an object and its
image is known as lateral inversion.

Number of images formed by two plane

Physics

[141]

Focal Length: The distance between the

pole (P) and principal focus (F) of the
spherical mirror is called the focal length
of the mirror.

light in vacuum or air to the velocity of

light in the medium.

Refraction of Light : The change in the

direction of propagation of light when it
goes from one medium to another medium is called refraction of light.
Laws of Refraction :

Refractive Index () of a medium is

defined as the ratio of the velocity of

[142]

General Science

(1)

the light travels from denser medium

to rarer medium.

(2)

the angle of incidence is greater

than the critical angle for the given
pair of denser and rarer media.

Lens : Lens is a transparent medium

bounded by two refracting surfaces.

Convex Lens or Converging Lens : A

lens having both spherical surfaces or
one spherical and the other plane such
that it is thick in the middle and thin at
the edges is known as convex lens or
converging lens.

Concave Lens or Diverging Lens : A

lens having both spherical surfaces or
one spherical and other plane such that
it is thin in the middle and thick at the

(2) The ratio of the sine of the incident

angle to the sine of the refracted angle
is constant for a pair of two media.

Condition for Total Internal Reflection :

Total internal reflection of light takes
place if

Linear Magnification: Linear magnification produced by a mirror is defined

as the ratio of the size (or height) of the
image to the size of the object. It is denoted by m.

(1) The incident ray, the refracted ray

and the normal to the surface separating the two media all lie in the
same plane.

Total Internal Reflection : The phenomenon of reflection of total light when

light travelling in a denser medium falls
on the surface separating the rarer medium and the denser medium at an angle
greater than the critical angle is called
total internal reflection.

Mirror Formula: The relation between

u, v, and focal length (f) of the spherical
mirror is known as mirror formula.

ssc
ex

tut

(1) All types of distance are measured from

the pole of a spherical mirror.

(3) The upward distances perpendicular

to the principal axis are taken as positive, while the downward distances
perpendicular to the principal axis are
taken as negative.

Principle of Reversibility of Light :

If the path of a ray of light is reversed

after suffering a number of refractions
and reflections, then it retraces its path.
This is known as principle of reversibility
of light.

Sign Conventions:

(2) Distance measured in the direction of

incident light are taken positive. Distance measured in the direction opposite to that of the incident light are
taken as negative.

or
.co
m

Principal Axis : A line joining the centre of curvature to two spherical surfaces forming a lens is called principal
axis.

Optical Centre : A point in a lens through

which rays of light passes undeviated. It is
denoted by C.

Principal Focus : A point in the principal

axis where all rays of light parallel to the
principal axis meet or appear to meet
after passing through the lens is called
principal focus of the lens.
Focal Length : The distance between the
principal focus and optical centre of a
lens is known as focal length of the lens.
It is denoted by f.

Principal Foci : A beam of light may fall

on either side of a lens. Therefore, a lens
has two principal foci. They are denoted by F1 and F2. Both principal foci
are equidistant from the optical centre.

ssc
ex

First Principal Focus (F1) : The position

of a point on the principal axis of a lens
so that the rays of light starting from this
point after passing through the lens
travel parallel to the principal axis is
called first principal focus (F1).

First Focal Plane : A vertical plane passing through the first principal focus is
called first focal plane.

First Principal Focal Length : The distance between the optical centre and
the first principal focus is called first
principal focal length. It is denoted by
f 1.

Second Focal Plane : A vertical plane

passing through the second principal focus is called second focal plane.

Second Principal Focal Length : The

distance between the optical centre and
the second principal focus is called second principal focal length. It is denoted
by f2.

Sign Conventions :

(1) All distances are measured from the

optical centre of a lens.
(2) Distance measured in the direction of
the propagation of incident ray of light
are taken as positive, while distance
measured in a direction opposite to the
direction of incident ray of light are
taken as negative.

principal axis meets or appears to meet

after passing through the lens is called
second principal focus (F2).

tut

or
.co
m

edges is known as concave lens or diverging lens.

Second Principal Focus (F2) : The position of a point on the principal axis of a
lens where a beam of light parallel to the

(3) Upward height with respect to the principal axis are taken as positive, while
downward heights with respect to the
principal axis are taken as negative.

Lens Formula : The relation between

object distance (u), image distance (v)
and focal length (f) of a lens is called lens
formula.

Power of a Lens is defined as the reciprocal of the focal length of the lens. It is
denoted by P.
Unit of power of a lens is dioptre (D).

Dispersion : The phenomenon of splitting white light into seven colours when
it passes through a glass prism is called
dispersion of white light.

Monochromatic Light : A light consisting of only one colour or only one wavelength is known as monochromatic light.
Physics

[143]

or
.co
m

Microscope & Telescope

2.
3.
4.

The focal length of the objective

lens is small.
The focal length of the eyepiece is
large.
The second focal point of objective
lens and first focal point of eyepiece are separated by the
distance equal to tube length
of the microscope.

Polychromatic Light : A light consisting

of more than two colours or more than
two wavelengths is known as polychromatic light.
For example, White light.

Spectrum : A band of seven colours of

white light is known as spectrum.

Pure Spectrum : A spectrum in which

various colours of white light occupy distinct positions without overlapping each
other on the screen is called pure spectrum.

ssc
ex

Persistance of vision is about

Pigments : A substance which absorbs

most of the colours of white light and
reflects one or more colours is called pigment.

Example : Red, Blue and Green.

Secondary Colours : When any two
primary colours are mixed, then a new
colour is formed. This new colour is
known as secondary colour. Thus, the
colour obtained by mixing two primary
colours are known as secondary colour.

[144]

General Science

The second focal point of objective

lens coincides with the first focal
point of the eye-piece.

Example : Yellow, Magenta and Cyan.

Complimentary Colours : Any two

colours are said to be a pair of complimentary colours if these produce white
light when mixed together.

Primary Pigments : Yellow, Cyan and

Magenta are the examples of primary
pigments.

Secondary Pigments : When a pair of

primary pigments are mixed together,
we get a new pigment known as secondary pigment.

second.

Primary Colours : The colours which

are never obtained by mixing two or
more colours are called primary colours.

Astronomical Telescope
It is used to observe large and distant
objects.
The focal length of objective lens is
large.
The focal length of eyepiece is small.

Compound Microscope
It is used to observe tiny objects.

tut

ELECTRICITY

Electric Potential : Work done per unit

charge is called electric potential.

Unit of Potential : S.I. unit of potential

is volt.

Potential is a scalar quantity.

Potential Difference : Potential difference between two points is defined as

the work done in moving a unit positive
charge from one point to another point.

Potential difference is a scalar quantity.

Equipotential Surface : A surface whose

every point has the same potential is
known as equipotential surface.

Units : S.I. unit of electric current is

ampere (A).

Ampere (A) : Electric current through a

conductor is said to be 1 ampere if one
coulomb charge flows through any crosssection of the conductor in one second.
Electric current is a scalar quantity.

Ohms Law : This law states that, the

electric current flowing in a conductor is
directly proportional to the potential difference across the ends of the conductor, provided the temperature and other
physical conditions of the conductor remains the same.

perature and decreases with the decrease of the temperature.

Resistivity or Specific Resistance : Resistivity is defined as the resistance of

the conductor of unit length and unit
area of cross-section.

Unit of Resistivity :

In CGS system, unit of resistivity is ohmcm.

In SI system, unit of resistivity is ohmmetre.

Conductance : Conductance of a conductor is the ability to pass charge or

current through it.

or
.co
m

Electric Current : An electric current is

defined as the amount of charge flowing
through any cross-section of a conductor in unit time.

tut

Joules Law of Heating :

The amount of heat produced in a conductor is

Resistance (R) : Resistance of a conductor is the ability of the conductor to oppose the flow of charge through it.

(i)

directly proportional to the square

of the electric current flowing
through it.

Unit of resistance is ohm.

(ii)

Ohm : Resistance of a conductor is said

to be 1 Ohm if a potential difference of 1
volt across the ends of the conductor produces a current of 1 ampere through it.

directly proportional to the resistance of the conductor.

(iii) directly proportional to the time for

which the electric current flows
through the conductor.

Laws of Resistance :

(1) Resistance of a conductor depends

upon the nature of the material of
the conductor.

Electric Fuse : Electric fuse is a safety

device used in an electric circuit or electric appliance.

Electric Energy : The work done by a

source of electricity to maintain a current in an electric circuit is known as
electric energy.

Electric Power : Electric power is defined as the amount of electric work done
in one second.

ssc
ex

(2) Resistance of a conductor is directly

proportional to the length of the
conductor.

(3) Resistance of a conductor is inversely

proportional to each of crosssection
of the conductor.
(4) Resistivity of metallic conductor increases with the increase of tem-

Unit of Power: S.I. unit of power is

watt.
Physics

[145]

Cation : When an atom loses electron or

electrons, it becomes positively charged ion
known as cation.

Electrolytic Cell or Voltameter : A vessel containing electrolyte and electrodes

in which electrolysis takes place is called
voltameter.

When an electrolyte in a solid state is

dissolved in water, it decomposes into
ions as the force of attraction between

1 h.p. = 746 w
Commercial Unit of Energy : kilowatthour (kWH)

Electrolytes : Substances which in molten state or in aqueous solution conduct

electricity by decomposing into negative
and positive ions are called electrolytes.

in water.

Faradays laws of Electrolysis :

1st Law : The mass of any substance

liberated at an electrode is directly proportional to the charge flowing through
the electrolyte.

Strong Electrolytes : Substances which

in molten state or in aqueous solution
completely decompose into negative and
positive ions are called strong electrolytes.

Weak Electrolytes : Substances which

in molten state or aqueous solution partially decompose into negative and positive ions are called weak electrolytes.

Mercury is a liquid which conducts electricity without decomposing into ions.

Electrodes : The conducting rods or

plates through which an electric current
enters or leaves the electrolyte are called
electrodes.

ssc
ex

Anode : The positive electrode is called

anode.

Cathode : The negative electrode is called

cathode.

Ion : Atom which has either lost or

gained electrons is called ion.

ions decrease by a factor of

Electrolysis : The process by which a

substance is decomposed by the passage
of electric current through it is called
electrolysis.

tut

1 kWh = 3.6 106J

or
.co
m

Practical unit of power is horse power

(h.p.)

Anion : When an atom gains electron or

electrons, it becomes negatively charged
ion known as anion.

[146]

General Science

i.e., m q or m = Zq or m = Zlt

2nd Law : If same amount of charge

flows through different electrolytes, the
masses of substances liberated or deposited at electrodes are directly proportional to their chemical equivalents.

Electro-chemical Equivalent (Z) is defined as the mass of the substance liberated at an electrode per unit charge flowing through the electrolyte.

Unit of Z is kg/coulomb or g/coulomb.

Chemical equivalent

Electroplating : The process of depositing a layer of superior metal over another cheaper metal or article by electrolysis is called electroplating.

Electro-chemical Cell : A device in

which a constant potential difference is
maintained between two electrodes by a

E.M.F. of a Cell is the potential difference between two electrodes when no

current is drawn from the cell.

Terminal Voltage of a Cell is the potential difference between two electrodes

when current is drawn from the cell.

Internal Resistance of a Cell is the resistance offered by a cell to the flow of

current through it.

or
.co
m

CuSO4 are the examples of depolarisers.

Daniel Cell : Electrolyte used is dilute

sulphuric acid. Copper sulphate (CuSO4)
acts as depolarizer E.M.F. of Daniel cell
= 1.5V.

Leclanche Cell : Electrolyte used is ammonium chloride solution, MnO2 acts as

depolarizer, E.M.F. of Leclanche cell =
1.5V.

Dry cell is the modified and portable

form of a Leclanche cell.

tut

chemical reaction is called electro chemical cell.

Types of Electrochemical Cells: (i) Primary cells (ii) Secondary cells.

Primary cells cannot be re-charged while

secondary cells can be re-charged.

Primary Cell converts chemical energy

into electrical energy by irreversible
chemical reactions.

Secondary Cell : A cell in which electrical energy is stored in the form of chemical energy and then chemical energy is
obtained in the form of electrical energy
by reversible chemical reactions is called
a secondary cell.

Magnetic Field : The space around a

current carrying conductor in which its
magnetic effect can be experienced is
called magnetic field.

ssc
ex

Internal resistance of a primary cell is

higher than that of a secondary cell.

Voltaic Cell is primary cell in which

dilute H2SO4 is used as electrolyte. Zinc
and copper plates are used as cathode
and anode.

Voltaic cell suffers from two defects: (i)

local action (ii) polarization

The value of e.m.f. of voltaic cell = 1.08

Polarization is the process of formation

of hydrogen bubbles on the electrode of
a cell, causing the e.m.f. of the cell to
drop and internal resistance of the cell
to increase.

Polarization can be removed by a substance known as depolarizer, MnO2 and

Maxwells Cork Screw Rule : If a cork

screw is driven in the direction of current passing through the wire, then the
motion of the thumb shows the direction
of the magnetic field.

Right Hand Thumb Rule : If a current

carrying conductor is imagined to be held
in the right hand such that thumb points
in the direction of the current, then the
fingers of the hand indicate the direction
of magnetic field.

Solenoid: A solenoid is a coil of many

turns of an insulated wire closely wound
in the shape of a cylinder.

Uniform Magnetic Field : Magnetic field

is said to be uniform if its magnitude is
equal and direction is same at every point
in the space.

Electromagnets : When a soft iron bar is

placed inside a solenoid carrying current, it becomes a magnet as long as
current passes through the solenoid.
Physics

[147]

Electromagnetic Induction : Whenever

magnetic flux linked with a circuit
changes, an induced e.m.f. is set up across
the circuit. This effect is known as electromagnetic induction.
Faradays Law of Electromagnetic Induction :
First Law : Whenever magnetic flux
linked with a circuit changes, induced
e.m.f. is produced across it. This induced
e.m.f. last so long as the change in magnetic flux continues.

(ii) resistance of the conductor and

(iii) time for which the current is passed.

Electric Energy : The electric energy

consumed in a circuit is defined as the
total work done in maintaining the current in an electric circuit for a given
time.

Electric energy = Vlt = Pt = I2 Rt = V2t/

R
S.I. unit of electric energy is joule (denoted by J) where 1 joule = 1 watt 1
second = 1 volt 1 ampere 1 second

Lenzs law is in accordance with the

law of conservation of energy.

Electric Power: It is defined as the rate

at which work is done in maintaining
the current in electric circuit.

Electric power, P = VI = I2R = V2/R

watt or joule/second-

Lenzs law of Electromagnetic Induction : According to this law, the direction of induced current is always such
that it opposes the cause producing it.

ssc
ex

(i) square of the current flowing

through the conductor.

Second Law : The magnitude of the

induced e.m.f. produced in the circuit is
directly proportional to the rate of change
of magnetic flux linked with it.

Joules Law of Heating : It states that

the amount of heat produced in a conductor is directly proportional to the-

tut

or
.co
m

Such magnets are known as electromagnets.

Commercial unit of electric energy is

kilowatt hour (kWh)

Electric Motor : Electric motor converts

electric energy into mechanical energy.

D.C. Generator or Dynamo : A device

which converts mechanical energy into
direct current energy is called D.C. generator or Dynamo.

Direct Current : An electric current

whose magnitude is either constant or
variable but the direction of flow in a
conductor remains the same is called
direct current. It is donated by D.C.

Alternating Current : An electric current whose magnitude changes with time

and direction reverses periodically is
called alternating current. It is denoted
by A.C.

[148]

General Science

where 1kWH = 1000 Wh = 3.6 106J

Electrolysis : The process of decomposition of a solution into ions on passing

the current through it is called electrolysis.

Electrolyte : It is a substance which

allows the current to pass through it
and also decomposes into positive and
negative ions. For example, acids, bases,
salts dissolved in water, alochol are common electroytes. Agl is a solid state
electroyte and KCl, NaCl are electrolytes in their molten state.

Electrodes : These are the two metal

Anode : The electrode connected to the

positive terminal of the battery i.e., the
electrode at higher potential, is called
anode.

Cathode : The electrode connected to

the negative terminal of the battery i.e.,
the electrode at lower potential, is called
cathode.

Ions : The charged constitutents of the

electrolyte which are liberated on passing current are called ions.
Anions : The ions which carry negative
charge and move towards the anode
during electrolysis are called anions.

Cations : The ions which carry positive

charge and move towards the cathode
during electrolysis are called cations.

Voltameter : The vessel, containing electrodes and electrolyte, in which the electrolysis is carried out is called a voltameter. In copper voltameter the electrodes
are of copper plates and electrolyte is an
aqueous solution of CuSO4. During electrolysis copper is removed from the anode and is deposited at the cathode. In
water voltameter the electrodes are of
pure platinum. The electrolyte is acidulated water i.e., water mixed with a small
quantity of sulphuric acid. During electrolysis hydrogen is liberated at cathode
and oxygen at anode. The hydrogen collected at cathode is double the amount
than the oxygen collected at anode.

or, m = zq

where z is the E.C.E. of the substance.

Second Law : When same amount of
charge is made to pass through any number of electrolytes, the masses of the substances liberated or deposited at the electrodes are proportional to their chemical
equivalents i.e.,

where m1, m2 are

the masses of the substances liberated or

deposited on electrodes during electrolysis and E1 and E2 are their chemical
equivalents.

ssc
ex

Faradays Laws of Electrolysis.

tional to the quantity of charge passed

through the electrolyte i.e.,

tut

or
.co
m

plates which are partially dipped in

the solution for passing the current
through the electroyte.

First Law : The mass of the substance

liberated or deposited at an electrode
during electrolysis is directly propor-

Faradays second law of electrolysis also

states that E.C.E. of a substance is directly proportional to the chemical
equivalent i.e., z E.

Faraday constant
Thus Faraday constant is equal to the
amount of charge required to liberate
the mass of a substance at an electrode
during electrolysis, equal to its chemical equivalent in grams.
One Faraday = 1F = 96500 C/gm
equivalent.

Electrical Cell : It is a device by which

electric current is generated due to
chemical action taking place in it. Electric cells are of two types: (i) Primary
cells (ii) Secondary cells.

Primary cell is that cell in which electrical energy is produced due to chemical
reaction which is irreversible. For example : Voltaic cell, Daniel cell,
Leclanche cell, dry cell, etc.
Physics

[149]

Seebeck Effect : It is the phenomenon

of generation of an electric current in a
thermocouple by keeping its two junctions at different temperatures.

Neutral Temperature : It is that temperature of hot junction for which the

thermo e.m.f produced in a thermocouple is maximum. Neutral temperature depends upon the nature of the
material of a thermocouple but is independent of the temperature of the cold
junction.

Temperature of Inversion : It is that

temperature of hot junction at which
the thermo e.m.f. produced in a thermo
couple becomes zero and just beyond, it
reverses its direction. The value of temperature of inversion depends upon: (i)
the temperature of the cold junction;
and (ii) the nature of materials forming
a thermocouple.

Seeback Series : Seeback, from his experimental investigations, arranged a

number of metals in a series known as
Seeback series. Some of the metals, in
this series, in the order Seeback arranged
them are bismuth, nickel, platinum, silver, gold, copper, lead, zinc, iron and
antimony.
Direction of thermo-electric current in
copper-iron thermocouple is from copper to iron through hot junction. In SbBi, thermocouple, the direction of
thermo-electric current is from Sb to Bi
through cold junction.

Thermocouple : The assembly of two

different metals joined at their ends to
have two junctions in a circuit is called
a thermocouple.

ssc
ex

Seebeck found that the magnitude and

direction of thermo e.m.f. developed in
a thermocouple depends upon: (i) the
nature of metals forming a thermocouple; and (ii) difference in
temeprature of the two junctions.
Seeback effect is a reversible effect. It
means, if hot and cold junctions are
inter-changed, the direction of thermoelectric current is reversed.

or
.co
m

Secondary cell is that cell in which the

electrical energy is first stored up as chemical energy and when current is drawn
from the cell, the stored chemical energy
is converted intro electrical energy. The
chemical reaction is reversible in this cell.
These cells are also known as storage
cells or accumulators. Examples are Acid
or Lead accumulator and Alkali or Edison
cell.

tut

[150]

General Science

Sources of energy : Renewable sources

and Non-renewable sources.

Solar energy is the energy emitted by

the sun in the form of heat and light.

Visible light consists of seven colours

i.e., Red, Orange, Yellow, Green, Blue,
Indigo, Violet.

Wavelength range of visible light is from

0.4 micron to 0.7 micron.

Red light has the longest wavelength

and violet light has the shortest wavelength.

Infra-red rays are emitted by all hot bodies.

Infra-red rays are absorbed by CO2 and

water vapours in the atmosphere of the
earth.

Ultra-violet rays are harmful radiations

and cause diseases like cancer and leukemia.

Ultra-violet rays are absorbed by ozone

layer of atmosphere.

Light is a stream of packets of energy

called photons.

Energy of each photon, E = hv

Solar energy is harnessed by solar devices like solar cooker, solar furnance,
solar cell, etc.

or
.co
m

Mass Number (A) of an atom is the sum

of the number of protons and neutrons
in the nucleus of the atom i.e. A = Z + N.

Isotopes : The atoms of an element having same atomic number (Z) but different mass numbers (A) are known as isotopes of the element.

Nuclear fusion reactions are the source

of energy of the Sun.

All isotopes of an element have the same

chemical properties.

Nuclear fusion reactions occur at about

10 7C.

German physicist Hans Bethe in 1939,

predicted that nuclear fusion of hydrogen nuclei in the Sun is the source of
energy of the Sun.

Radioactivity is the phenomenon of spontaneous emission of invisible radiations

by heavy elements.

Radioactivity was discovered by Henri

Becquerel.

Atom consists of three particles namely

proton (1H1), neutron (on1) and electron
( 1e 0).

Nucleus of an atom contains protons

and neutrons and hence is positively
charged.

ssc
ex

tut

Electrons move around the nucleus in circular orbits.

Number of protons in the nucleus of an
atom is equal to the number of electrons
revolving around it, so atom is electrically neutral.

Mass of electron = 9.1 1031 kg. Mass of

proton = 1.672 1027 kg.

The radiations emitted by radioactive

elements are alpha particles (2He4), beta
particles (1e0) and gamma rays (). These
radiations are very harmful to the living
organisms.

Gamma rays have the highest penetrating power than the other two radiations.

Radio Isotopes are the isotopes of radioactive elements.

Nuclear forces keep the nucleons inside

the nucleus. Small nuclei are stable and
big nuclei are unstable.

Nuclear fission is the process of splitting

a heavy nucleus into two small nuclei of
middle weight with the release of large
amount of energy.

Mass of neutron = 1.674 1027 kg.

Charge on an electron = 1.6 1019C.

Charge on a proton = + 1.6 1019C.

Protons and Neutrons inside the nucleus

are collectively known as nucleons.

Uranium-235, isotope of Uranium is used

as a fuel in nuclear fission.

Energy released in a single nuclear fission of U-235 is about 200 MeV.

Uncontrolled chain reaction is the principle of atom bomb.

Atomic Number (Z) of an atom is equal

to the number of protons in the nucleus
of the atom.

Physics

[151]

Nuclear fission reaction starts when U235 absorbs a slow neutron.

Moderator is a substance used to slow

down fast moving neutrons. Heavy wa-

or
.co
m

Nuclear reactor is a device to carry out

controlled chain reaction.

ter and graphite are the examples of

moderator.

Cadmium rods are used to increase or

decrease the nuclear fission reactions in
the nuclear reactor.

tut

ssc
ex

[152]

General Science

RRB NTPC Fully Solved Practice Set
No ratings yet
RRB NTPC Fully Solved Practice Set
20 pages
Mouse Trap Car Formal Lab
100% (1)
Mouse Trap Car Formal Lab
3 pages
Total SSC Physics 2015
50% (2)
Total SSC Physics 2015
51 pages
SSC 2024 Science (English)
No ratings yet
SSC 2024 Science (English)
78 pages
Wa0000.
No ratings yet
Wa0000.
260 pages
Art and Culture and Misc
No ratings yet
Art and Culture and Misc
45 pages
Mathematics Ebook (ENGLISH) For Railway Exams
No ratings yet
Mathematics Ebook (ENGLISH) For Railway Exams
632 pages
Ukpsc Solved Papers Gs & Csat 2024
No ratings yet
Ukpsc Solved Papers Gs & Csat 2024
416 pages
SSC CGL+RRB NTPC 2024-25 Preparation - Syllabus, Exam Pattern and Mentorship Group
No ratings yet
SSC CGL+RRB NTPC 2024-25 Preparation - Syllabus, Exam Pattern and Mentorship Group
49 pages
SSC CGL T1 2024 General Awareness (English)
No ratings yet
SSC CGL T1 2024 General Awareness (English)
127 pages
70th BPSC Prospectus-2
No ratings yet
70th BPSC Prospectus-2
16 pages
RRB NTPC CBT - 1 Previous Year Question Paper - 1251
No ratings yet
RRB NTPC CBT - 1 Previous Year Question Paper - 1251
77 pages
RPF SI 2024 ALL 15 Shift English
No ratings yet
RPF SI 2024 ALL 15 Shift English
301 pages
1159_teamspy (1)
No ratings yet
1159_teamspy (1)
288 pages
Compound interest-03 (Railway PYQ SERIES)
100% (1)
Compound interest-03 (Railway PYQ SERIES)
3 pages
Gravitation - Physics Notes For RRB NTPC 2024 Exams
No ratings yet
Gravitation - Physics Notes For RRB NTPC 2024 Exams
7 pages
SSC MTS 24 General AwarenessTopicWise (HARD to EASY)
No ratings yet
SSC MTS 24 General AwarenessTopicWise (HARD to EASY)
203 pages
1eq Maths Formula Book - Eng
No ratings yet
1eq Maths Formula Book - Eng
31 pages
GK (Eng) One-liner SSC MTS 2024 T-1
No ratings yet
GK (Eng) One-liner SSC MTS 2024 T-1
94 pages
How To Score 90% Marks SSC Tier 1 & Tier 2 Exam
No ratings yet
How To Score 90% Marks SSC Tier 1 & Tier 2 Exam
17 pages
Ratio & Proportion by RaMo
No ratings yet
Ratio & Proportion by RaMo
6 pages
Physics for Ssc Je Chsl Exam
No ratings yet
Physics for Ssc Je Chsl Exam
131 pages
Clock and Calendar Questions For Railway NTPC Group D Exams
No ratings yet
Clock and Calendar Questions For Railway NTPC Group D Exams
21 pages
Railway RRB 2016 - 1074 Questions Asked in Exam: India's Best Current Affairs Android App
No ratings yet
Railway RRB 2016 - 1074 Questions Asked in Exam: India's Best Current Affairs Android App
54 pages
Algebra Formulas For SSC CGL 2022 531661622714529
No ratings yet
Algebra Formulas For SSC CGL 2022 531661622714529
4 pages
BPSC Exam: Previous Years Question Paper
No ratings yet
BPSC Exam: Previous Years Question Paper
76 pages
Eng SSC 2024 Complete General Awareness Chapter Wise Easy to Hard Level (1)
No ratings yet
Eng SSC 2024 Complete General Awareness Chapter Wise Easy to Hard Level (1)
585 pages
Maths (Eng) SSC CGL 2024 Tier-1 RBE Compressed
No ratings yet
Maths (Eng) SSC CGL 2024 Tier-1 RBE Compressed
153 pages
SSC & Railway Exam 2019: General Science CAPSULE For
No ratings yet
SSC & Railway Exam 2019: General Science CAPSULE For
62 pages
Computer Question All TCS Compilation in English
No ratings yet
Computer Question All TCS Compilation in English
78 pages
Railways Book PDF
No ratings yet
Railways Book PDF
144 pages
General Mental Ability MCQs Part 2
No ratings yet
General Mental Ability MCQs Part 2
14 pages
15 Pratice Set For RRB NTPC Graduate Stage 2 Exam
No ratings yet
15 Pratice Set For RRB NTPC Graduate Stage 2 Exam
249 pages
T.R SSC CGL 2017 43 Set GK
No ratings yet
T.R SSC CGL 2017 43 Set GK
92 pages
Indian Polity Notes For UPSC Mains
No ratings yet
Indian Polity Notes For UPSC Mains
39 pages
Class Notes Quant PDF
100% (2)
Class Notes Quant PDF
733 pages
Jharkhand 2000 Pyq
No ratings yet
Jharkhand 2000 Pyq
138 pages
Calculation
No ratings yet
Calculation
29 pages
Share 'General Science Capsule For Railways
No ratings yet
Share 'General Science Capsule For Railways
63 pages
FINAL Monthly Currents Affairs CGKM 2025_V (1)
100% (1)
FINAL Monthly Currents Affairs CGKM 2025_V (1)
711 pages
ECONOMICS ? SSC MTS 2022 G K ALL 57 Sets ECONOMICS Previous Year
No ratings yet
ECONOMICS ? SSC MTS 2022 G K ALL 57 Sets ECONOMICS Previous Year
234 pages
RRB NTPC Syllabus 2020 - General Awareness
No ratings yet
RRB NTPC Syllabus 2020 - General Awareness
1 page
GEOGRAPHY TOP 500 QUESTIONS BY SHIVANT SIR
No ratings yet
GEOGRAPHY TOP 500 QUESTIONS BY SHIVANT SIR
55 pages
2011 To 2018 All Geometry Mains Questions by Gagan Pratap
No ratings yet
2011 To 2018 All Geometry Mains Questions by Gagan Pratap
51 pages
Untitled
No ratings yet
Untitled
4 pages
E Book SSC CGL Tier 1 Exam Last 5 Years History Questions
No ratings yet
E Book SSC CGL Tier 1 Exam Last 5 Years History Questions
17 pages
Idioms One Liner SSC Exams 2020 to Jan 2025 RBE Compressed Copy
No ratings yet
Idioms One Liner SSC Exams 2020 to Jan 2025 RBE Compressed Copy
55 pages
POLITY 500 MCQ BY SHIVANT SIR GS 2
No ratings yet
POLITY 500 MCQ BY SHIVANT SIR GS 2
70 pages
CHEMISTRY Questions Chapter Wise Upsc Capf Ac Exam
100% (2)
CHEMISTRY Questions Chapter Wise Upsc Capf Ac Exam
9 pages
Classical Dance of India
100% (2)
Classical Dance of India
41 pages
BPSC PYQ Science English Pram IAS.
No ratings yet
BPSC PYQ Science English Pram IAS.
152 pages
Static_GK_English_Medium_2nd_Edition_By_Godfather_Join_@apna_pdf
No ratings yet
Static_GK_English_Medium_2nd_Edition_By_Godfather_Join_@apna_pdf
257 pages
(All 21 Shifts) : GK Compilation (English) Printable Format
No ratings yet
(All 21 Shifts) : GK Compilation (English) Printable Format
24 pages
GK Book For All Exams
100% (1)
GK Book For All Exams
63 pages
May 2024 Monthly Ca
No ratings yet
May 2024 Monthly Ca
138 pages
Divisibility Practice Sheet - 03
No ratings yet
Divisibility Practice Sheet - 03
3 pages
SSC CGL Preparatory Guide -Mathematics (Part 3)
From Everand
SSC CGL Preparatory Guide -Mathematics (Part 3)
Dr. DK Sukhani
No ratings yet
SSC CGL Preparatory Guide -Mathematics (Part 2)
From Everand
SSC CGL Preparatory Guide -Mathematics (Part 2)
Dr. DK Sukhani
4/5 (1)
SSC CGL Preparatory Guide -Mathematics (Part 1)
From Everand
SSC CGL Preparatory Guide -Mathematics (Part 1)
Dr. DK Sukhani
No ratings yet
Physics
No ratings yet
Physics
152 pages
PHYSICS NOTES FOR Forest Guard - WWW - Governmentexams.co - in PDF
No ratings yet
PHYSICS NOTES FOR Forest Guard - WWW - Governmentexams.co - in PDF
150 pages
Friction IA
No ratings yet
Friction IA
4 pages
Practice Test-3-Laws of Motion-Circular Motion
No ratings yet
Practice Test-3-Laws of Motion-Circular Motion
14 pages
OPTION1 Applies To The MPP Implementation Only.: Control - CPM
No ratings yet
OPTION1 Applies To The MPP Implementation Only.: Control - CPM
20 pages
Class - 6 Physics Chapter - 3 Force (Exercise) : A. Choose The Correct Option
100% (1)
Class - 6 Physics Chapter - 3 Force (Exercise) : A. Choose The Correct Option
4 pages
Understanding Lubrication From The Bearing
100% (1)
Understanding Lubrication From The Bearing
22 pages
CE 3rd sem CE BS301,02 CE-ES301,02 CE -HS 301,02
No ratings yet
CE 3rd sem CE BS301,02 CE-ES301,02 CE -HS 301,02
8 pages
Astm e 1911 - 98
No ratings yet
Astm e 1911 - 98
7 pages
WWW Slideshare
No ratings yet
WWW Slideshare
2 pages
Chapter 5
No ratings yet
Chapter 5
21 pages
Structural Masangkay Quiz 1
No ratings yet
Structural Masangkay Quiz 1
6 pages
Viscosity of Liquid
No ratings yet
Viscosity of Liquid
8 pages
Friction (Static) X Movement
No ratings yet
Friction (Static) X Movement
5 pages
Bearing Number Code Reference
No ratings yet
Bearing Number Code Reference
6 pages
Topic 2.2 - Forces - PPT New
No ratings yet
Topic 2.2 - Forces - PPT New
61 pages
Apex Seal Vibration Analysis of Limacon PDF
No ratings yet
Apex Seal Vibration Analysis of Limacon PDF
9 pages
shaft+bearing
No ratings yet
shaft+bearing
7 pages
Tractive Effort
No ratings yet
Tractive Effort
11 pages
Earthquake Resistant Structures
No ratings yet
Earthquake Resistant Structures
19 pages
Laboratory For Traction
No ratings yet
Laboratory For Traction
13 pages
A Suggested Technique For Determining The Basic Friction Angle of Rock Surface Using Core
No ratings yet
A Suggested Technique For Determining The Basic Friction Angle of Rock Surface Using Core
3 pages
NSCI-6100-2013T (UGRD) Calculus-Based Physics 1 Compilation
No ratings yet
NSCI-6100-2013T (UGRD) Calculus-Based Physics 1 Compilation
38 pages
Lab Report 1 Major and Minor Loss
No ratings yet
Lab Report 1 Major and Minor Loss
10 pages
Nailed-Soil Retaining Structures: Design and Practice: Llan Juran
No ratings yet
Nailed-Soil Retaining Structures: Design and Practice: Llan Juran
12 pages
Ch08 Gaya Gesek
No ratings yet
Ch08 Gaya Gesek
30 pages
End Face Mechanical Seal: Navigation Search
No ratings yet
End Face Mechanical Seal: Navigation Search
16 pages
Energy and Work Extended 2022 - Ruoyu Tang
No ratings yet
Energy and Work Extended 2022 - Ruoyu Tang
29 pages
Is 8730
No ratings yet
Is 8730
22 pages
Damper Torque
No ratings yet
Damper Torque
3 pages
SoR 04-Hands On Simple LAMMPS Examples
No ratings yet
SoR 04-Hands On Simple LAMMPS Examples
14 pages