Scribd
Upload
129 views

Electrical: Specifications

Desneho elétrico do C18.

Uploaded by

wagner_guimarães_1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
129 views

Electrical: Specifications

Desneho elétrico do C18.

Uploaded by

wagner_guimarães_1
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Service Information System

Page 1 of 4

Specifications
Cat Digital Voltage Regulator
Media Number -RENR7941-09

Publication Date -01/05/2014

Date Updated -28/05/2014

i05816864

Electrical
SMCS - 4467
Part Number - 361-8010
S/N - Part Number - 314-7755
S/N - Table 1
Specifications
Regulation

0.25% from no load to full load.

Regulator temperature
drift

Less than 1% for any 40 C (72 F) change over the ambient operating
temperature range.

Volts/Hz characteristic
that can be configured

Two slope ranges adjustable from 1 to 10 V/Hz. Refer to regulation


characteristic Illustration 1.

Regulator response time Maximum of 10 milliseconds.


Regulator sensing

True RMS 3-phase sensing is standard. Single phase sensing is


available. Variable sense range: 90 to 600 V.

Regulator stability

The regulator maintains stable output voltage within 0.25% for total
harmonic distortion of the generator output voltage waveform up to
30%. The regulator maintains stable output voltage within 0.50% for
total harmonic distortion of the generator output voltage waveform up
to 40%. Thee values are based on a typical 6-SCR bridge.

Telephone influence
factor (TIF)

Less than 50. Complies with MIL STD 461C Part 9 and VDE 0875
level N.

Fine voltage adjust


range

10% of regulator sensing voltage.

Regulator voltage gain


(Line loss
compensation)

Adjustable from 0 to 10%.

Fault detection and


identification

Diagnostics identify operation outside of programmed limits. Specific


fault information is available even after the unit has been powered
down. CAN bus only.

Harmonic tolerance

For total harmonic distortion of the generator output voltage waveform

https://sis.cat.com/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/med... 06/02/2015

Service Information System

Page 2 of 4

up to 30%, the regulator maintains stable output voltage within 0.25%.


For total harmonic distortion of the generator output voltage waveform
up to 40%, the regulator maintains stable output voltage within 0.50%.
These values are based on a typical 6-SCR bridge.
Reactive droop
adjustment

Adjustable from 0 to 10%.

Over excitation
protection

Shuts off generator output when excitation current exceeds normal


operating currents for 10 seconds or instantaneous shutoff if output
current exceeds approximately 28 A.

Ambient operating
temperature
Storage temperature
range

40 C (40 F) to
+70 C (+ 158 F).
40 C (40 F) to
+85 C (+ 185 F).

Power dissipation

5 W at idle, 55 W at rated output.

Shock

Withstands up to 20 g (g-force) in three mutually perpendicular planes.

Vibration

Withstands 4.5 g (g-force) at frequencies between 18 and 2000 Hz in


three mutually perpendicular planes.

Salt fog

5% salt spray for 48 hours at


38 C (100.4 F) at 115% of the nominal operating voltage.

Weight
1.47 kg (3.24 lb.).
Electromagnetic
compatibility

Meets 89/336/EEC Electromagnetic Compatibility Directive.

Power supply

24 6 VDC power supply required (0.5 amp).


UL

Underwriters Laboratory (UL) recognized per "Standard 508, UL File


No. E97035".

CSA

Certified per "Standard CAN/CSA-C22.2 No. 14-95, CSA File No. LR


23131".

CE

Conforms to the following standards:


Radiated Emissions EN50081-2
Radiated Immunity (electric field) EN61000-4-3 (10 V/m)
Radiated Immunity (conducted) EN61000-4-6 (10 VRMS)
Conducted Emissions EN50081-2 (EN55011, Class A)
ESD Immunity EN50082-2 (4 kV contact, 8 kV air)
EFT Immunity EN50082-2 (2 kV coupling clamp)
Magnetic Immunity EN50082-2 (30 ARMS, 50 Hz)
Safety EN61010-1

Conformity

https://sis.cat.com/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/med... 06/02/2015

Service Information System

Page 3 of 4

View Image

Illustration 1
Regulation characteristic

g01040043

Table 2
Summary of Operating Parameters
Parameter

Specifications

Voltage Regulation
Rating

120 to 15000 V
PM
SE
Internal Excitation (IE)

Generator Type

Voltage (1)
Power Input

80 to 264 V
(3)
100 to 280 V
(1)

Frequency

50 to 400 Hz

Maximum Continuous
Output Rating

Burden (Continuous)

1150 VA (63 VDC applications) or 1900


VA (125 VDC applications)
Maximum Forcing (10 Seconds)

Voltage

Current

Voltage

Current

63 V or 125
V

12 or 10 A

125 V or 250 V

25 or 20 A

https://sis.cat.com/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/med... 06/02/2015

Service Information System

Page 4 of 4

Voltage

Maximum VA Burden per

Sensing
90 to 600 V
Maximum Current

1 VA
Maximum VA Burden

Reactive Droop
5A
Exciter Field
Resistance
(1)

Minimum Resistance
3 Ohms

1 VA
Maximum Resistance
39 Ohms

As the CDVR input voltage increases, the PWM duty cycle decreases. As PWM duty cycle decreases, system
stability may decrease as well. Powering the CDVR with a voltage closer to the low end of this range is preferred.

Copyright 1993 - 2015 Caterpillar Inc.


All Rights Reserved.
Private Network For SIS Licensees.

Fri Feb 6 18:30:34 UTC-0200 2015

https://sis.cat.com/sisweb/sisweb/techdoc/content.jsp?calledpage=/sisweb/sisweb/med... 06/02/2015

You might also like