Scribd
Upload
2K views

Offsec Lab Connectivity Guide

This document provides instructions for connecting to an online VPN lab for an Offensive Security penetration testing course. It outlines the purpose and setup of the labs, which allow students to practice hacking techniques on virtual machines simulating a multi-network organization. The document instructs students on downloading the VPN connection package for Kali Linux, initiating the connection, and testing connectivity. It establishes rules for student behavior in the shared lab environment and provides details on the specific target virtual machines available in each lab subnet.

Uploaded by

nobuyuki
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

Offsec Lab Connectivity Guide

This document provides instructions for connecting to an online VPN lab for an Offensive Security penetration testing course. It outlines the purpose and setup of the labs, which allow students to practice hacking techniques on virtual machines simulating a multi-network organization. The document instructs students on downloading the VPN connection package for Kali Linux, initiating the connection, and testing connectivity. It establishes rules for student behavior in the shared lab environment and provides details on the specific target virtual machines available in each lab subnet.

Uploaded by

nobuyuki
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 7

Offensive

Security

Penetration Testing with


Kali Linux


Lab Connectivity Guide
v.3.8.1

Mati Aharoni
MCT, MCSE + Security, CCNA, CCSA, HPOV, CISSP

Offensive Security Online Lab Connectivity Guide


Thank you for opting to take the Offensive Security Penetration Testing with Kali Linux (PWK) training.
The following document contains instructions for connecting to our online VPN labs and other useful
information, which will help you get the most out of the course and labs. Please read it carefully.

The PWK Labs


The PWK labs are an important part of the online course. The lab allows the student to implement and
practice various penetration testing techniques in a legally safe environment.
The lab simulates a multi-network organization that contains servers with various vulnerabilities. These
vulnerabilities will be exploited by you in a guided and controlled manner as instructed in the videos and
PDF lab guide. You are to document your findings through a Penetration Test Report. You can find this
template, as well as other important information relating to the PWK course in our forums once your
course has begun: http://forums.offensive-security.com/forumdisplay.php?f=69
Note that you cannot register to our forums. An account is automatically created for you once you
register, and the credentials are sent to you together with the course materials.

Rules of Behavior
As opposed to a normal network, our aim is to allow you to succeed in hacking our systems. In fact, we
expect the students to acquire administrative privileges on almost all the systems in the lab!
The labs are shared with other students; therefore, we request that you do not alter the configurations
of machines you hack. Although every machine in the lab is backed up and restorable in less than 20
seconds, configuration changes are a nuisance for your fellow students please be courteous to them.
The lab runs several monitoring and logging systems. Users disregarding these rules will be removed
from the labs and their lab sessions will be terminated.
Any configuration change on a machine will result in an immediate revert of the machine to its original
state. Please be responsible in your lab usage.

The machines you should be targeting (depending on your lab assignment) are:
LAB 1 - 192.168.11.200 - 192.168.11.254
LAB 2 - 192.168.13.200 - 192.168.13.254
LAB 3 - 192.168.15.200 - 192.168.15.254
LAB 4 - 192.168.17.200 - 192.168.17.254
LAB 5 - 192.168.19.200 - 192.168.19.254
LAB 6 - 192.168.31.200 - 192.168.31.254
PLEASE DO NOT SCAN OR ATTACK MACHINES OUTSIDE THIS RANGE.

Connecting to the labs


Connection to the labs is done over VPN, using Kali Linux. You can either install Kali Linux to disk, or use
our Kali Linux Gnome VMware image. You can download Kali here:
http://www.kali.org/downloads/
1) Download the PWK Lab connection package to your Kali Linux machine and extract its contents.
Use openvpn to initiate the VPN connection to the labs. Enter your provided username and
password. Note that testing accounts expire in 48 hours (or after submitting the course fees)
root@kali:~# tar jxpf lab-connection.tar.bz2
root@kali:~# cd lab-connection/
root@kali:~/lab-connection# openvpn lab-connection.conf
Thu Mar 18 21:21:46 2010 OpenVPN 2.1_rc11 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11]
built on Oct 15 2008


Enter Auth Username: OS-xxxx
Enter Auth Password: XXXXXXXXXX
Thu Mar 18 21:22:06 2010 WARNING: No server certificate verification method has been enabled.
See http://openvpn.net/howto.html#mitm for more info.
Thu Mar 18 21:22:06 2010 LZO compression initialized
Thu Mar 18 21:22:06 2010 UDPv4 link local: [undef]
Thu Mar 18 21:22:06 2010 UDPv4 link remote: 208.88.120.4:1194
Thu Mar 18 WARNING: this configuration may cache passwords in memory
Thu Mar 18 [127.0.0.1] Peer Connection Initiated with 208.88.120.4:1194
Thu Mar 18 21:22:07 2010 TUN/TAP device tap0 opened
Thu Mar 18 /sbin/ifconfig tap0 192.168.10.3 netmask 255.255.254.0 mtu 1500
Thu Mar 18 21:22:07 2010 Initialization Sequence Completed

2) Once connected, leave that window open. In a new shell, determine the IP address that you have
been assigned as follows:
root@kali:~# ifconfig tap0

3) You will be assigned to one of our labs as outlined above. Note that the subnet is a /23 and not a /24.
Based upon the IP address you are assigned, you will be able to ping one of the following lab
machines: 192.168.11.220, 192.168.13.220, 192.168.15.220, 192.168.17.220, 192.168.19.220, or
192.168.31.220. Maintain this connection for a while to verify its stability. Once you are satisfied with
the ping response time, your connectivity test is complete.

General Lab Usage


The labs are composed of a simulated network with various live (virtual) machines. Each student has a
reserved Windows 7 client in the labs, which is used in several exercises. Test users are not issued
Windows 7 machines.

Hazards
Please read this part extremely carefully.
By joining the Offensive Security VPN, you will be connecting to a potentially hostile environment.
Although no traffic is directly allowed between student machines (by design), you must be vigilant at all
times. This is true even if you are located behind a NAT device. Please take the proper precautions to
protect your client computer. Make sure to change your root password! Please do not scan the internal
network once connected.

Technical Problems
If you're having connectivity problems or other non-training related issues, you can contact us in several
ways and we will try to help you to the best of our abilities.

IRC
We have an active IRC channel on irc.freenode.net in the #offsec channel. You will usually find a member
of our staff there along with other students participating in the course. If you are new to IRC, check out
our quick guide at the following URL:
http://www.offensive-security.com/irc-guide.pdf

Jabber
You can contact us on the Jabber network at the following address: [email protected].

EMAIL
You can email us at [email protected].

We wish you a productive and enjoyable time in our labs!
The Offensive Security Team

You might also like