100% found this document useful (3 votes)
2K views6 pages

ISO Standards On Welding

This document lists numerous ISO standards related to welding processes, materials, and testing. It includes standards for classifying welding consumables like electrodes, wires, fluxes and gases. Other standards cover test methods for weld metal and joints, including tensile, bend, hardness and fracture tests. Additional standards specify quality requirements for fusion welding, define terms related to welds and imperfections, and provide recommendations for welding different materials.

Uploaded by

wentroprem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
100% found this document useful (3 votes)
2K views6 pages

ISO Standards On Welding

This document lists numerous ISO standards related to welding processes, materials, and testing. It includes standards for classifying welding consumables like electrodes, wires, fluxes and gases. Other standards cover test methods for weld metal and joints, including tensile, bend, hardness and fracture tests. Additional standards specify quality requirements for fusion welding, define terms related to welds and imperfections, and provide recommendations for welding different materials.

Uploaded by

wentroprem
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 6

STANDARDS FOR WELDING (ISO)

ISO 6848:2004
Arc welding and cutting -- Nonconsumable tungsten electrodes -- Classification
ISO 14171:2002
Welding consumables -- Wire electrodes and wire-flux combinations for submerged arc
welding of non alloy and fine grain steels Classification
ISO 14172:2003
Welding consumables -- Covered electrodes for manual metal arc welding of nickel and nickel
alloys Classification
ISO 14174:2004
Welding consumables -- Fluxes for submerged arc welding -- Classification
ISO 14175:2008
Welding consumables -- Gases and gas mixtures for fusion welding and allied processes
ISO 14341:2002
Welding consumables -- Wire electrodes and deposits for gas shielded metal arc welding of
non alloy and fine grain steels -- Classification
ISO 15792-1:2000
Welding consumables -- Test methods -- Part 1: Test methods for all-weld metal test
specimens in steel, nickel and nickel alloys
ISO 15792-2:2000
Welding consumables -- Test methods -- Part 2: Preparation of single-run and two-run
technique test specimens in steel
ISO 15792-3:2000
Welding consumables -- Test methods -- Part 3: Classification testing of positional capacity
and root penetration of welding consumables in a fillet weld
ISO 16834:2006
Welding consumables -- Wire electrodes, wires, rods and deposits for gas-shielded arc
welding of high strength steels -- Classification
ISO 17632:2004
Welding consumables -- Tubular cored electrodes for gas shielded and non-gas shielded
metal arc welding of non-alloy and fine grain steels -- Classification

Page 1 of 22

ISO 17633:2004
Welding consumables -- Tubular cored electrodes and rods for gas shielded and non-gas
shielded metal arc welding of stainless and heat-resisting steels -- Classification
ISO 17634:2004
Welding consumables -- Tubular cored electrodes for gas shielded metal arc welding of creepresisting steels -- Classification
ISO 18273:2004
Welding consumables -- Wire electrodes, wires and rods for welding of aluminium and
aluminium alloys -- Classification
ISO 18274:2004
Welding consumables -- Wire and strip electrodes, wires and rods for fusion welding of nickel
and nickel alloys -- Classification
ISO 18275:2005
Welding consumables -- Covered electrodes for manual metal arc welding of high-strength
steels -- Classification
ISO 18276:2005
Welding consumables -- Tubular cored electrodes for gas-shielded and non-gas-shielded
metal arc welding of high-strength steels -- Classification
ISO 21952:2007
Welding consumables -- Wire electrodes, wires, rods and deposits for gas-shielded arc
welding of creep-resisting steels -- Classification
ISO 24034:2005
Welding consumables -- Solid wires and rods for fusion welding of titanium and titanium alloys
-- Classification
ISO 24373:2008
Welding consumables -- Solid wires and rods for fusion welding of copper and copper alloys -Classification
ISO 24598:2007
Welding consumables -- Solid wire electrodes, tubular cored electrodes and electrode/flux
combinations for submerged arc welding of creep-resisting steels -- Classification
ISO 4136:2001
Destructive tests on welds in metallic materials -- Transverse tensile test
ISO 5173:2000
Destructive tests on welds in metallic materials -- Bend tests

ISO 5178:2001
Destructive tests on welds in metallic materials -- Longitudinal tensile test on weld metal in
fusion welded joints
ISO 9015-1:2001
Destructive tests on welds in metallic materials -- Hardness testing -- Part 1: Hardness test on
arc welded joints
ISO 9015-2:2003
Destructive tests on welds in metallic materials -- Hardness testing -- Part 2: Microhardness
testing of welded joints
ISO 9016:2001
Destructive tests on welds in metallic materials -- Impact tests -- Test specimen location,
notch orientation and examination
ISO 9017:2001
Destructive tests on welds in metallic materials -- Fracture test
ISO 9018:2003
Destructive tests on welds in metallic materials -- Tensile test on cruciform and lapped joints
ISO 10675-1:2008
Non-destructive testing of welds -- Acceptance levels for radiographic testing -- Part 1: Steel,
nickel, titanium and their alloys
ISO/TR 16060:2003
Destructive tests on welds in metallic materials -- Etchants for macroscopic and microscopic
examination
ISO 17635:2003
Non-destructive testing of welds -- General rules for fusion welds in metallic materials
ISO 17636:2003
Non-destructive testing of welds -- Radiographic testing of fusion-welded joints
ISO 17637:2003
Non-destructive testing of welds -- Visual testing of fusion-welded joints
ISO 17638:2003
Non-destructive testing of welds -- Magnetic particle testing
ISO 17639:2003
Destructive tests on welds in metallic materials -- Macroscopic and microscopic examination
of welds
ISO 17640:2005
Non-destructive testing of welds -- Ultrasonic testing of welded joints

ISO 23277:2006
Non-destructive testing of welds -- Penetrant testing of welds -- Acceptance levels
ISO 23278:2006
Non-destructive testing of welds -- Magnetic particle testing of welds -- Acceptance levels
ISO 23279:2007
Non-destructive testing of welds -- Ultrasonic testing -- Characterization of indications in welds
ISO/TR 581:2005
Weldability -- Metallic materials -- General principles
ISO 857-1:1998
Welding and allied processes -- Vocabulary -- Part 1: Metal welding processes
ISO 4063:1998
Welding and allied processes -- Nomenclature of processes and reference numbers
ISO 6520-1:2007
Welding and allied processes -- Classification of geometric imperfections in metallic materials - Part 1: Fusion welding
ISO 6947:1990
Welds -- Working positions -- Definitions of angles of slope and rotation

ISO 9692-1:2003
Welding and allied processes -- Recommendations for joint preparation -- Part 1: Manual
metal-arc welding, gas-shielded metal-arc welding, gas welding, TIG welding and beam
welding of steels
ISO 17658:2002
Welding -- Imperfections in oxyfuel flame cuts, laser beam cuts and plasma cuts -- Terminology

ISO 17659:2002
Welding -- Multilingual terms for welded joints with illustrations
ISO/TS 17845:2004
Welding and allied processes -- Designation system for imperfections
ISO/TR 25901:2007
Welding and related processes -- Vocabulary
ISO 3834-1:2005
Quality requirements for fusion welding of metallic materials -- Part 1: Criteria for the selection of
the appropriate level of quality requirements

Page 4 of 22

ISO 3834-2:2005
Quality requirements for fusion welding of metallic materials -- Part 2: Comprehensive quality
requirements
ISO 3834-3:2005
Quality requirements for fusion welding of metallic materials -- Part 3: Standard quality
requirements
ISO 3834-4:2005
Quality requirements for fusion welding of metallic materials -- Part 4: Elementary quality
requirements
ISO 3834-5:2005
Quality requirements for fusion welding of metallic materials -- Part 5: Documents with which it is
necessary to conform to claim conformity to the quality requirements of ISO 3834-2, ISO 3834-3
or ISO 3834-4
ISO 15607:2003
Specification and qualification of welding procedures for metallic materials -- General rules
ISO/TR 15608:2005
Welding -- Guidelines for a metallic materials grouping system
ISO 15609-1:2004
Specification and qualification of welding procedures for metallic materials -- Welding procedure
specification -- Part 1: Arc welding
ISO 15614-1:2004
Specification and qualification of welding procedures for metallic materials -- Welding procedure
test -- Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys

ISO 544:2003
Welding consumables -- Technical delivery conditions for welding filler materials -- Type of
product, dimensions, tolerances and markings
ISO 636:2004
Welding consumables -- Rods, wires and deposits for tungsten inert gas welding of non-alloy and
fine-grain steels -- Classification
ISO 1071:2003
Welding consumables - Covered electrodes, wires, rods and tubular cored electrodes for fusion
welding of cast iron - Classification
ISO 2401:1972
Covered electrodes -- Determination of the efficiency, metal recovery and deposition coefficient

Page 5 of 22

ISO 2560:2002
Welding consumables -- Covered electrodes for manual metal arc welding of non-alloy and fine
grain steels -- Classification
ISO 3581:2003
Welding consumables -- Covered electrodes for manual metal arc welding of stainless and
heat-resisting steels -- Classification
ISO/TR 17671-1:2002
Welding -- Recommendations for welding of metallic materials -- Part 1: General guidance for arc
welding
ISO/TR 17671-2:2002
Welding -- Recommendations for welding of metallic materials -- Part 2: Arc welding of ferritic
steels
ISO/TR 17671-3:2002
Welding -- Recommendations for welding of metallic materials -- Part 3: Arc welding of stainless
steels
ISO/TR 20172:2006
Welding -- Grouping systems for materials -- European materials
ISO 9606-1:1994
Approval testing of welders -- Fusion welding -- Part 1: Steels
ISO 12224-1:1997
Solder wire, solid and flux cored -- Specification and test methods -- Part 1: Classification and
performance requirements

Page 6 of 22

You might also like