0% found this document useful (0 votes)
150 views

SW2

This switch is operating as the root bridge in its Spanning Tree Protocol (STP) domain with a priority of 24576. Ports gi1 and gi9 are in the forwarding state while port gi10 transitioned from blocking to learning to forwarding as the network topology changed. The show commands display STP and VLAN configuration information for this switch.

Uploaded by

ziblur
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
150 views

SW2

This switch is operating as the root bridge in its Spanning Tree Protocol (STP) domain with a priority of 24576. Ports gi1 and gi9 are in the forwarding state while port gi10 transitioned from blocking to learning to forwarding as the network topology changed. The show commands display STP and VLAN configuration information for this switch.

Uploaded by

ziblur
Copyright
© © All Rights Reserved
Available Formats
Download as TXT, PDF, TXT or read online on Scribd
You are on page 1/ 6

Switch# sh run

! System Description: RTK RTL8380-8GE-2GEF Switch


! System Version: vv180M_1.26.x_8P-D141107
! System Name: Switch
! System Up Time: 0 days, 6 hours, 41 mins, 14 secs
!
!
!
ip address 192.168.2.2 mask 255.255.255.0
ip default-gateway 192.168.2.254
no ipv6 autoconfig
username "admin" secret encrypted MjEyMzJmMjk3YTU3YTVhNzQzODk0YTBlNGE4MDFmYzM=
voice-vlan vlan 0
voice-vlan cos 0
voice-vlan aging-time 0
management-vlan vlan 1
!
port-security
!
!
spanning-tree mode stp
spanning-tree priority 24576
spanning-tree mst configuration
name "DE:AD:BE:EF:01:02"
spanning-tree mst 0 priority 24576
no dos daeqsa-deny
no dos land-deny
no dos udpblat-deny
no dos tcpblat-deny
no dos pod-deny
no dos ipv6-min-frag-size-check
dos ipv6-min-frag-size-length 0
no dos icmp-frag-pkts-deny
no dos icmpv4-ping-max-check
no dos icmpv6-ping-max-check
dos icmp-ping-max-length 0
no dos smurf-deny
no dos tcphdr-min-check
dos tcphdr-min-length 0
no dos syn-sportl1024-deny
no dos nullscan-deny
no dos xma-deny
no dos synfin-deny
no dos synrst-deny
no dos tcp-frag-off-min-check
!
no ipv6 mld snooping report-suppression
ipv6 mld snooping unknown-multicast action drop
udld message time 0
!
!
!
!
!
ip telnet
!
!
!
ip dhcp snooping database timeout 0
ip dhcp snooping database write-delay 0

!
!
gvrp timer leaveall 0
gvrp timer leave 0
gvrp timer join 0
!
!
interface lag1
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag2
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag3
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag4
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag5
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag6
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag7
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface lag8
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
!
interface gi1
eee
switchport mode access
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi2
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0

lldp tlv-select management-addr


!
interface gi3
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi4
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi5
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi6
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi7
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi8
eee
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
!
interface gi9
eee
speed auto 1000
duplex full
ip source binding max-entry 0
ip arp inspection rate-limit 0
ipv6 mld max-groups 0
lldp tlv-select management-addr
udld port disable
!
interface gi10
eee
speed auto 1000
duplex full
ip source binding max-entry 0
ip arp inspection rate-limit 0

ipv6 mld max-groups 0


lldp tlv-select management-addr
!
!
!
!
Switch# show spanning-tree
Spanning tree enabled mode STP
Default port cost method: long

Root ID

Priority
Address
This switch
Hello Time

24576
de:ad:be:ef:01:02
is the root
2 sec Max Age 20 sec Forward Delay 15 sec

Number of topology changes 20 last change occurred 00:05:17 ago


Times: hold 0, topology change 0, notification 0
hello 2, max age 20, forward delay 15
Interfaces
Name
State Prio.Nbr Cost
Sts
--------- -------- -------- -------- -----gi1 enabled 128.1
200000 Frw
gi9 enabled 128.9
20000 Frw
Switch# show spanning-tree

Role EdgePort
Type
---- -------- ----------------Desg
No P2P (STP)
Desg
No P2P (STP)

Spanning tree enabled mode STP


Default port cost method: long

Root ID

Priority
Address
This switch
Hello Time

24576
de:ad:be:ef:01:02
is the root
2 sec Max Age 20 sec Forward Delay 15 sec

Number of topology changes 20 last change occurred 00:06:34 ago


Times: hold 0, topology change 0, notification 0
hello 2, max age 20, forward delay 15
Interfaces
Name
State Prio.Nbr Cost
Sts
--------- -------- -------- -------- -----gi1 enabled 128.1
200000 Frw
gi9 enabled 128.9
20000 Frw
gi10 enabled 128.10
20000 Blk
Switch# show spanning-tree
Spanning tree enabled mode STP
Default port cost method: long

Role EdgePort
Type
---- -------- ----------------Desg
No P2P (STP)
Desg
No P2P (STP)
Desg
No P2P (STP)

Root ID

Priority
Address
This switch
Hello Time

24576
de:ad:be:ef:01:02
is the root
2 sec Max Age 20 sec Forward Delay 15 sec

Number of topology changes 20 last change occurred 00:06:47 ago


Times: hold 0, topology change 0, notification 0
hello 2, max age 20, forward delay 15
Interfaces
Name
State Prio.Nbr Cost
Sts
--------- -------- -------- -------- -----gi1 enabled 128.1
200000 Frw
gi9 enabled 128.9
20000 Frw
gi10 enabled 128.10
20000 Lrn
Switch# show spanning-tree

Role EdgePort
Type
---- -------- ----------------Desg
No P2P (STP)
Desg
No P2P (STP)
Desg
No P2P (STP)

Spanning tree enabled mode STP


Default port cost method: long

Root ID

Priority
Address
This switch
Hello Time

24576
de:ad:be:ef:01:02
is the root
2 sec Max Age 20 sec Forward Delay 15 sec

Number of topology changes 23 last change occurred 00:00:08 ago


Times: hold 0, topology change 0, notification 0
hello 2, max age 20, forward delay 15
Interfaces
Name
State Prio.Nbr Cost
Sts Role EdgePort
--------- -------- -------- -------- ------ ---- -------gi1 enabled 128.1
200000 Frw Desg
No
gi9 enabled 128.9
20000 Frw Desg
No
gi10 enabled 128.10
20000 Frw Desg
No
Switch#
Switch# show spanning-tree interfaces GigabitEthernet 9
Port gi9 enabled
State: forwarding
Port id: 128.9
Type: P2P (STP)
Designated bridge Priority : 24576
Designated port id: 128.9
BPDU Filter: Disabled
BPDU: sent 1805, received 18

Type
----------------P2P (STP)
P2P (STP)
P2P (STP)

Role: designated
Port cost: 20000
Edge Port: No
Address: de:ad:be:ef:01:02
Designated path cost: 0
BPDU guard: Disabled

Switch# show spanning-tree interfaces GigabitEthernet 10


Port gi10 enabled
State: blocking
Port id: 128.10
Type: P2P (STP)
Designated bridge Priority : 24576
Designated port id: 128.10
BPDU Filter: Disabled

Role: designated
Port cost: 20000
Edge Port: No
Address: de:ad:be:ef:01:02
Designated path cost: 0
BPDU guard: Disabled

BPDU: sent 376, received 0


Switch# show vlan
VID |
VLAN Name
|
Untagged Ports
|
Tagged Ports
| Type
-------+------------------+------------------------------+-----------------------------+--------1 |
management |
gi1-10,lag1-8 |
--- | Default

You might also like