ISO

4014

INTERNATIONAL
STANDARD

Third edition
1999-09-01

Vis a f&e hexagonale partiellement filetees- Grades A er B

Reference number
ISO 4014:1999(E)

ISO 401 4:1999(E)

Foreword
ISO (the International Organization for Standardization)is a worldwide federationof national Standards bodies (ISO
member bodies). The workof preparingInternationalStandardsisnormally
carried outthroughISOtechnical
committees. Each member body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, governmental and non-governmental, in
liaison with ISO, alsotakepart
in thework. ISO collaboratescloselywiththeInternationalElectrotechnical
Commission (IEC) onalt matters of electrotechnical standardization.
International Standards are draftedin accordance with the rules given
in the ISO/IEC Directives, Part3.
Draft International Standards adopted by the technical committees are circulated to the member bodies for voting.
Publication as an International Standard requires approval by at least
75 % of the member bodiesCasting a vote.
International Standard ISO 4014 was preparedby Technical CommitteeISO/TC 2, Fasteners.
This third edition cancels and replaces the second
edition (ISO 4014:1988) which hasbeen technically revised.

0 ISO 1999
All rights reserved. Unless otherwise specified, no part
of this publication may be reproduced
or utilized in any form or by any means, electronic
or mechanical, including photocopying and microfilm, without permission
in writing from the publisher.
International Organization for Standardization
Case postale56 CH-1211 Geneve 20 Switzerland
lnternet iso9iso.ch
Printed in Switzerland

0 ISO

ISO 4014: 1999(E)

lntroduction
ThisInternationalStandardispartofthecomplete
fasteners. The series comprises:

ISO product Standard series on external hexagon drive

a) hexagon head bolts (ISO 4014 to ISO 4016 and ISO 8765);
b)

hexagon head screws (ISO 4017, ISO 4018 and ISO 8676);

C)

hexagon nuts (ISO 4032 to ISO 4036, ISO 8673 to ISO 8675);

d) hexagon bolts with flange

e)

0f)

(ISO 4162 and ISO 15071);

hexagon nuts with flange (ISO 4161 and ISO 10663);

structural bolts and nuts (ISO 4775, ISO 7411 to ISO 7414 and ISO 7417).

...

111

INTERNATIONAL
STANDARD

o ISO

ISO 4014:1999(E)

Hexagon head bolts - Product grades A and B

1 Scope
This International Standard specifies the characteristics
of hexagon head bolts with threads from
M1,6 uptoand
including M64, of product grade A for threads M1,6 to M24 and nominal lengths up to and including 10 d or 150 mm,
whichever is shorter and product gradeB for threads over M24 or nominal lengths over10 d or 150 mm, whichever is
shorter.

If, in Special cases, specifications other than those listed in this International Standard are required, they should be
selected from existina International Standards, for example ISO 724, ISO 888, ISO 898-1, ISO 965-1, ISO 3506-1,
ISO 4753 andISO 4759-1.

2 Normative references
The following normative documents contain provisions which, through reference in this text, constitute provisions
of
thisInternationalStandard.Fordatedreferences,subsequentamendments
to,orrevisionsof,anyofthese
publications do not apply. However, parties to agreements based on this International Standard are encouraged to
investigate the possibility of applying the most recent editions
of the normative documents indicated below. For
undated references, the latest edition of the normative document referred to applies. Members of ISO and IEC
maintain registersof currently valid International Standards.
ISO 2231983, Fasteners- Bolts, screws, studsand nuts - Symbols and designations of dimensions.
ISO 724: 1993,/SO general-purpose metric screw threads
- Basic dimensions.

ISO 888:1976, Bolts, screwsand studs - Nominal lengths, and thread lengths for general purpose bolts.
ISO 898-1:1999, Mechanical properties of fasteners made of carbon steel and alloy steeland studs.

Part 1: Bolts, screws

ISO 965-1:1998, ISO general purposemetric screw threads- Tolerances - Part 1: Principles and basic data.

ISO 3269:-),

Fasteners -Acceptance inspection.

ISO 3506-1:1997,Mechanicalproperties of corrosion-resistant stainless-steel fasteners - Part 1: Bolts, screwsand

studs.
ISO 401 7:1999, Hexagon head screws
- Product grades Aand B.

ISO 4042:1999, Fasteners - Electroplated coatings.

ISO 4753:3), Fasteners - Ends ofparts with external metricISO thread.

)To be published. (Revision of ISO 3269:1988)

*)

To be published. (Revisioin of ISO 4753:1983)

ISO 4014:1999(E)
ISO 4759-1 :-3),

0 ISO

Tolerances for fasteners

- Part 1: Bolts, screws, studs and nuts- Product gradesA, B and C.

ISO 61 57-1:1988, Fasteners - Sutface discontinuities- Part 1: Bolts, screws and studs for general requirements.
ISO 8839:1986, Mechanicalpropetties of fasteners - Bolts, screws, studs and nuts made of non-ferrous metals.
ISO 8992:1986, Fasteners - General requirements for bolts, screws, studs
and nuts.

ISO 10683:-4), Fasteners

-Non-electrolyticallyapplied zinc flake

3 Dimensions
See Figure 1 and Tables 1 and 2

Symbols and descriptionof dimensions are defined in ISO 225.

3)To be published. (Revision of ISO 4759-1:1978)

4) To be published.

coatings.

0 ISO

ISO 4014: 999(

1 E)
Dimensions in millimetres

P=

15" to 30"

Point shall be chamfered or for threads == M4 may be as-rolled (sheared end) (See
lncomplete thread U

ISO 4753)

s 2P

Referee datum for d ,

Maximum underhead fillet

Figure 1

Table 1

- Preferred threads
Dimensions in millimetres

Thread (d)

P
b

b 20
ref.

0,40

18
29
0,25

0,25

2,6

da

max.
0,lO
min.
max.

nom. = max.

dS

Product
grade
Product

A min.

* mim

M1,6

M2

M2,5

M3

M4

M5

M6

M8

M10

0,35
9
17 15
28
0,25
0,lO

04

0,45
11

03
1226

0,7

1
18
24

1,25

1,s

31

33
0940
0,15
0.1

0,8
16
22
35
0,50
0,15

10

22

16

30

0,15

0,lO

2
1,60
1,46

14

31

19%

2m
136
2,86
2,75
1,75

2,27

3,07

2,50
2936
5.702,25
4,07

5.7

37
OS0
5

28
41
0.60
0,15

3,6

4.7
4,oo
3,82
3.70

5,00

600

8,00

10,oo

4,82

5,82

7,78

9,78

5,88

6,88

8.88

764
11 63

9,W
14

457

63

45
0.60
0,15
11,2

3300
4,70

92

32

Prcduct grade
A

1, and lg fg

nom.
12

min.

11,6!5

15,6!5

16.35

20

19,58

20,42

18,951 21,05
26,05

25

24,58

30

29.58

35

343

355

33,75

36,25

40

39.5

403

38,75

41,251

45

443

455

43,75

46,25

50

49,5

503

48,75

51,25

55

54,4

55,6

533

563

25,42

23.95

I,

max.
max. min.
max.
min.

12,35

16
r

31,05
28,95 30,42

60

59,4

65

64,4

656

70

69,4

70,6

633
603

715

80

79.4

80,6

785

813

90

89.3

90,7

88,25

91,75

61,5
58,5 60,6
66,5

100

99.3

110

109,3

110,7 108,25 111,75

120

119,3

120,7

101,75
98.25 100,7

1 18,25 121,75

min.

max.

2,75

10

6,75

L-------l

11,75
----I

min.

max.
max.

min.

max.

rnin.

s
min.

max.

lg

4
rnin.

max.
max. min.

i
i
i
i
i
i
i
i
i
For sizes above the solid, boldface stepped line ISO 4017 is recommended

max.

P
0

(D
(D
(D
n

Table 1 (continued)
Dimensions in millimetres

ISO 4014: 1999(E)

-mil I I I I
E

-4 I I I I
E

I
I

I
I

I
I

I
I

ISO 4014:1999(E)

0 ISO

Table 2 - Non-preferred threads

Dimensions in rnillirnetres

'I

40
27,5
48
35,5
56 '
46
90
100 101,75
99398,25
100,7
50 37,5 58 45,5 66
56
60 4?,5 68 66 55,5 76
11,75
108,25
110.7109,3 110
120 119,3 120,7 118,25 121,75
I
76
86
130 129,2 130,8
128
132
I 80
90
138
140 139.2 140,8
142
- -90
- - -- -100
152
149,2
150,8
148
150
99,5
160
162
158
119,5 180
182
178

8,25 90,7 89,3

!OO
202,3
!20
222,3
!40
!60

197,7
217,7
237,7
257,4

'I
'

40
65,5
69.5
79,5

I-89,5102

78
82
92

57,5
61,5
71,5

70
74
84

- -------81,594

!
-1

25
35
45
49
59
6984

50
60

64
74

Thread (4

M33

M39

Pa

3,5

M60
M45
4,5

M52
5

575

b ref

- 436,85
325wo 302,5
443,15
306
160 463,15
456,85
- 476,85
326
I80 483,15
- 496,85
ioo NOTE

Popularlengthsaredefinedin

tens of ls and lg:

- for product grade A. above the dashed, stepped line;

-for product grade B, below this stepped line.
P is the pitch of the thread.

kw, min = 0.7 kmn

For lengths lnom

G 125 mm.
lengths
For
lengths
For

125 mm <,,I

,,I

s 200 mm.

> 200 mm.

9,max = lnom - b
L , min = lg. max - 5P
length.
minimum
grip
$, is the

ISO 401

4:1999(E)

ISO

4 Specifications and reference Standards

See Table3.

Table 3 - Specifications andreference Standards

-~

Steel

Material

I
I

Tolerance

Mechanical
properties

International
Standards
Property
ClaSSa

International
Standards

Tolerances

Product
grade
International
Standard

I Non-ferrous meta1 I
I

ISO 8992

General
International
requirements Standard
Thread

Stainless
steel

6g
ISO 724, ISO 965-1

Materials
d s 24 mm: A2-70, A4-70
d < 3 mm: as agreed
specified
in
24
mm
d
s
39
mm:
3mmsds39mm:
ISO
8839
A2-50, A4-50
5.6, 8.8, 9.8, 10.9
d > 39 mm: as agreed
d > 39 mm: as agreed
d s 39 mm: ISO 3506-1
3mmsds39mm:
d > 39 mm: as agreed
ISO 898-1
d<3mmandd>39mm:
as agreed
Fords24mmandIs 10dor150mmb:A
For d > 24 mm orI > 10 dor 150 mmb: B
ISO 4759-1

As processed

Finish and/or coating

Plain

Requirements for
electroplating are covered in
ISO 4042

Requirements for
electroplating are
covered in
ISO 4042

Requirementsfor
non-electrolytically applied
zinc flake coatings are
covered in ISO 10683
if requirements are needed
I
lf different electroplatingreqLrirc?ments are desired or
for other finishes, they should be agreed between customer and supplier.

Limits for surface

discontinuities are covered
in ISO 6157-1

Acceptability

For acceptance procedure,See ISO 3269.

For other property classes SeeISO 898-1 for steel andISO 3506-1 for stainless steel respectively.
Whichever is shorter.

5 Designation
~

EXAMPLE
A hexagon head bolt with threadM12, nominal length1 = 80 mm and propertydass 8.8 is designated as follows:

Hexagon head boltISO 4014 M12 X 80 8.8

10

ISO 4014:1999(E)

ISO

Bibliography

[l]

ISO 401 5 1 979,Hexagon head bolts

equal topitch diameter).

- Product grade B - Reduced shank (shank diameter approximately

[2] ISO 401

6:1999,
Hexagon head bolts- Product grade C.

[3] ISO 401

7:1999,
Hexagon head screws- Product gradesA and B.

[4] ISO 4018:1999,Hexagon head screws- Product grade C.

[5] ISO 4032:1999,Hexagon nuts, style 1 - Product grades A and B.
[6] ISO 4033:1999,Hexagon nuts,style 2 - Product gradesA and B.
[7] ISO 4034:1999,Hexagon nuts - Product grade C.
[8] ISO 40351

999,
Hexagon thin nuts (chamfered)- Product gradesA and B.

[9] ISO 4036:1999,Hexagon thin nuts (unchamfered) -Product grade B.

:1999,
Hexagon nutswith flange - Coarse thread.

[l 01 ISO 41

61

[l 11 ISO 41

62:-5),
Hexagon boltswith flange - Small series- Product grade combinationN B .

[12]ISO 47751 984,

Hexagon nuts for high-strength
grade B - Property classes8 and 10.

structural bolting with large width across flats

- Product

[13]ISO 741 1 :1984,Hexagon bolts for high-strength structural bolting with large width across flats (thread lengths
according to/SO 888) - Product gradeC - Property classes8.8 and 10.9.
[14]ISO 741 2:1984,
Hexagon bolts for high-strength structural bolting with large width across flats (short thread
length) - Product gradeC - Property classes8.8 and 10.9.
[15]ISO 741

3:1984,
Hexagon nuts for structural bolting, style 1, hot-dip galvanize (oversize tapped)
grades A and B - Property classes5, 6 and 8.

- Product

0 [16]ISO 741

4:1984,
Hexagon nuts forstructural bolting with large width across flats,style 1 - Product grade B Property class 10.

7:1984,
Hexagon nuts for structural bolting, style 2, hot-dip galvanize (oversize tapped)
grade A - Property dass 9.

[17]ISO 741

- Product

[18]ISO 8673:1999,Hexagon nuts,style 1, with metric finepitch thread - Product gradesA and B.
[19]ISO 8674:1999,Hexagon nuts,sty/e 2, with metric fine pitch thread - Product gradesA and B.
[20]ISO 8675:1999,Hexagon thin nuts (chamfered) with metric fine
pitch thread - Product gradesA and B.
[21]ISO 8676:1999,Hexagon head screws with metric
fine pitch thread - Product gradesA and B.

5, To

be published. (Revisionof ISO 4162:1990)

11

ISO 401 4:1999(E)

[22] ISO 87651999, Hexagon head bolts with metric fine
pitch thread - Product gradesA and B.

[23] ISO 10663:1999, Hexagonnuts with flange - f i n e pitch thread.

[24] ISO 15071 :1999, Hexagonbolts with flange -Small series - Product gradeA.

12

0 ISO