Chapter 8
8.0 Introduction
8.1 IPv4 Network Addresses
8.2 IPv6 Network Addresses
Chapter 8: IP Addressing
8.3 Connectivity Verification
8.4 Summary
Introduction to Networks
Chapter 8: Objectives
IPv4 Address Structure
Binary Number System
Upon completion of this chapter, you will be able to:
Describe the structure of an IPv4 address.
Describe the purpose of the subnet mask.
Compare the characteristics and uses of the unicast, broadcast, and
multicast IPv4 addresses.
Compare the use of public address space and private address space.
Explain the need for IPv6 addressing.
Describe the representation of an IPv6 address.
Describe types of IPv6 network addresses.
Configure global unicast addresses.
Describe multicast addresses.
Describe the role of ICMP in an IP network. (Include IPv4 and IPv6.)
Use ping and traceroute utilities to test network connectivity.
IPv4 Address Structure
Converting a Binary Address to Decimal
Practice
IPv4 Address Structure
Converting a Binary Address to Decimal
Practice
Answer = 176
Answer = 255
IPv4 Address Structure
IPv4 Address Structure
Converting a Binary Address to Decimal
Converting from Decimal to Binary (Cont.)
IPv4 Subnet Mask
Network Portion and Host Portion of an IPv4 Address
IPv4 Subnet Mask
Network Portion and Host Portion of an IPv4
Address (cont.)
To define the network and host portions of an address, a devices
use a separate 32-bit pattern called a subnet mask
Valid Subnet Masks
The subnet mask does not actually contain the network or host
portion of an IPv4 address, it just says where to look for these
portions in a given IPv4 address
IPv4 Subnet Mask
IPv4 Subnet Mask
Examining the Prefix Length
Examining the Prefix Length (cont.)
IPv4 Subnet Mask
IPv4 Subnet Mask
IPv4 Network, Host, and Broadcast Address
First Host and Last Host Addresses
10.1.1.0/24
10.1.1.0/24
IPv4 Subnet Mask
IPv4 Unicast, Broadcast, and Multicast
Bitwise AND Operation
Assigning a Static IPv4 Address to a Host
1 AND 1 = 1
1 AND 0 = 0
0 AND 1 = 0
0 AND 0 = 0
LAN Interface Properties
IPv4 Unicast, Broadcast, and Multicast
IPv4 Unicast, Broadcast, and Multicast
Assigning a Dynamic IPv4 Address to a Host
Unicast Transmission
Configuring a Static IPv4 Address
In an IPv4 network, the hosts can communicate one of three different ways:
Unicast, Broadcast, and Multicast
#1 Unicast the
process of sending a
packet from one host to
an individual host.
Verification
DHCP The preferred method of assigning IPv4 addresses to hosts on
large networks because it reduces the burden on network support staff
and virtually eliminates entry errors.
IPv4 Unicast, Broadcast, and Multicast
IPv4 Unicast, Broadcast, and Multicast
Broadcast Transmission
Multicast Transmission
In an IPv4 network, the hosts can communicate one of three different
ways: Unicast, Broadcast, and Multicast.
In an IPv4 network, the hosts can communicate one of three different ways:
Unicast, Broadcast, and Multicast.
#3 Multicast The process of sending a packet from one host to a
selected group of hosts, possibly in different networks .
#2 Broadcast the
process of sending a
packet from one host to
all hosts in the network.
Directed broadcast
Destination
172.16.4.255
Hosts within the
172.16.4.0/24
network
NOTE: Routers do
not forward a
limited broadcast!
Directed broadcast
Destination
172.16.4.255
Hosts within the
172.16.4.0/24 network
Reduces traffic
Reserved for addressing multicast groups 224.0.0.0 to
239.255.255.255.
Link local 224.0.0.0 to 224.0.0.255 (Example: routing information
exchanged by routing protocols)
Globally scoped addresses 224.0.1.0 to 238.255.255.255 (Example:
224.0.1.1 has been reserved for Network Time Protocol)
Types of IPv4 Address
Types of IPv4 Address
Public and Private IPv4 Addresses
Special Use IPv4 Addresses
Private address blocks are:
Network and Broadcast addresses within each network the first
and last addresses cannot be assigned to hosts
Hosts that do not require access to the Internet can use private
addresses
10.0.0.0 to 10.255.255.255 (10.0.0.0/8)
172.16.0.0 to 172.31.255.255 (172.16.0.0/12)
192.168.0.0 to 192.168.255.255 (192.168.0.0/16)
Shared address space addresses:
Not globally routable
Intended only for use in service provider networks
Address block is 100.64.0.0/10
Loopback address 127.0.0.1 a special address that hosts use to
direct traffic to themselves (addresses 127.0.0.0 to 127.255.255.255
are reserved)
Link-Local address 169.254.0.0 to 169.254.255.255
(169.254.0.0/16) addresses can be automatically assigned to the local
host
TEST-NET addresses 192.0.2.0 to 192.0.2.255 (192.0.2.0/24) set
aside for teaching and learning purposes, used in documentation and
network examples
Experimental addresses 240.0.0.0 to 255.255.255.254 are listed
as reserved
See if updated graphic with top row
in text case for consistency.
Types of IPv4 Address
Types of IPv4 Address
Legacy Classful Addressing
Legacy Classful Addressing (cont.)
Classless Addressing
Formal name is Classless Inter-Domain Routing (CIDR, pronounced
cider
Created a new set of standards that allowed service providers to
allocate IPv4 addresses on any address bit boundary (prefix length)
instead of only by a class A, B, or C address
Types of IPv4 Address
Types of IPv4 Address
Assignment of IP Addresses
Assignment of IP Addresses (Cont.)
Regional Internet Registries
(RIRs)
ISPs are large national
or international ISPs that
are directly connected to
the Internet backbone.
Tier 2 ISPs generally
focus on business
customers.
Tier 3 ISPs often bundle
Internet connectivity as a part of
network and computer service
contracts for their customers.
Tier 3 ISPs purchase their
Internet service from Tier 2
ISPs.
IPv4 Issues
IPv4 Issues
The Need for IPv6
IPv4 and IPv6 Coexistence
IPv6 is designed to be the successor to IPv4.
Depletion of IPv4 address space has been the motivating factor for
moving to IPv6.
The migration techniques can be divided into three categories:
Dual-stack, Tunnelling, and Translation.
Dual-stack
Projections show that all five RIRs will run out of IPv4 addresses
between 2015 and 2020.
With an increasing Internet population, a limited IPv4 address space,
issues with NAT and an Internet of things, the time has come to begin
the transition to IPv6!
IPv4 has a theoretical maximum of 4.3 billion addresses, plus private
addresses in combination with NAT.
IPv6 larger 128-bit address space provides for 340 undecillion
addresses.
IPv6 fixes the limitations of IPv4 and includes additional
enhancements, such as ICMPv6.
IPv4 Issues
Dual-stack: Allows IPv4 and IPv6 to coexist on the same network.
Devices run both IPv4 and IPv6 protocol stacks simultaneously.
IPv4 Issues
IPv4 and IPv6 Coexistence (cont.)
Tunnelling
IPv4 and IPv6 Coexistence (cont.)
Translation
Translation: The Network Address Translation 64 (NAT64) allows
IPv6-enabled devices to communicate with IPv4-enabled devices
using a translation technique similar to NAT for IPv4. An IPv6 packet
is translated to an IPv4 packet, and vice versa.
Tunnelling: A method of transporting an IPv6 packet over an IPv4
network. The IPv6 packet is encapsulated inside an IPv4 packet.
IPv6 Addressing
IPv6 Addressing
Hexadecimal Number System
Hexadecimal Number System (cont.)
Hexadecimal is a base
sixteen system.
Look at the binary bit
patterns that match the
decimal and hexadecimal
values
Base 16 numbering
system uses the
numbers 0 to 9 and the
letters A to F.
Four bits (half of a byte)
can be represented with
a single hexadecimal
value.
IPv6 Addressing
IPv6 Addressing
IPv6 Address Representation
IPv6 Address Representation (cont.)
128 bits in length and written as a string of hexadecimal values
In IPv6, 4 bits represents a single hexadecimal digit, 32 hexadecimal
value = IPv6 address
2001:0DB8:0000:1111:0000:0000:0000:0200
FE80:0000:0000:0000:0123:4567:89AB:CDEF
Hextet used to refer to a segment of 16 bits or four hexadecimals
Can be written in either lowercase or uppercase
IPv6 Addressing
IPv6 Addressing
Rule 1- Omitting Leading 0s
Rule 2 - Omitting All 0 Segments
The first rule to help reduce the notation of IPv6 addresses is any
leading 0s (zeros) in any 16-bit section or hextet can be omitted.
A double colon (::) can replace any single, contiguous string of one or
more 16-bit segments (hextets) consisting of all 0s.
01AB can be represented as 1AB.
09F0 can be represented as 9F0.
Double colon (::) can only be used once within an address otherwise
the address will be ambiguous.
0A00 can be represented as A00.
Known as the compressed format.
00AB can be represented as AB.
Incorrect address - 2001:0DB8::ABCD::1234.
IPv6 Addressing
Rule 2 - Omitting All 0 Segments (cont.)
Types of IPv6 Addresses
IPv6 Prefix Length
IPv6 does not use the dotted-decimal subnet mask notation
Example #1
Prefix length indicates the network portion of an IPv6 address using
the following format:
IPv6 address/prefix length
Prefix length can range from 0 to 128
Typical prefix length is /64
Example #2
Types of IPv6 Addresses
Types of IPv6 Addresses
IPv6 Address Types
IPv6 Unicast Addresses
There are three types of IPv6 addresses:
Unicast
Multicast
Anycast.
Note: IPv6 does not have broadcast addresses.
Unicast
Uniquely identifies
an interface on an
IPv6-enabled
device.
A packet sent to a
unicast address is
received by the
interface that is
assigned that
address.
Types of IPv6 Addresses
Types of IPv6 Addresses
IPv6 Unicast Addresses (cont.)
IPv6 Unicast Addresses (cont.)
Global Unicast
Similar to a public IPv4 address
Globally unique
Internet routable addresses
Can be configured statically or assigned dynamically
Link-local
Used to communicate with other devices on the same local link
Confined to a single link; not routable beyond the link
Types of IPv6 Addresses
Types of IPv6 Addresses
IPv6 Unicast Addresses (cont.)
IPv6 Unicast Addresses (cont.)
Loopback
Unique Local
Used by a host to send a packet to itself and cannot be assigned to a
physical interface.
Ping an IPv6 loopback address to test the configuration of TCP/IP on
the local host.
All-0s except for the last bit, represented as ::1/128 or just ::1.
Unspecified Address
All-0s address represented as ::/128 or just ::
Similar to private addresses for IPv4.
Used for local addressing within a site or between a limited
number of sites.
In the range of FC00::/7 to FDFF::/7.
IPv4 Embedded (not covered in this course)
Used to help transition from IPv4 to IPv6.
Cannot be assigned to an interface and is only used as a source
address.
An unspecified address is used as a source address when the device
does not yet have a permanent IPv6 address or when the source of
the packet is irrelevant to the destination.
Add a header
Types of IPv6 Addresses
Types of IPv6 Addresses
IPv6 Link-Local Unicast Addresses
IPv6 Link-Local Unicast Addresses (cont.)
Every IPv6-enabled network interface is REQUIRED to have a linklocal address
Packets with a
source or
destination link-local
address cannot be
routed beyond the
link from where the
packet originated.
Enables a device to communicate with other IPv6-enabled devices
on the same link and only on that link (subnet)
FE80::/10 range, first 10 bits are 1111 1110 10xx xxxx
1111 1110 1000 0000 (FE80) - 1111 1110 1011 1111 (FEBF)
IPv6 Unicast Addresses
IPv6 Unicast Addresses
Structure of an IPv6 Global Unicast Address
Structure of an IPv6 Global Unicast Address (cont.)
IPv6 global unicast addresses are globally unique and routable on the
IPv6 Internet
Equivalent to public IPv4 addresses
Currently, only global unicast addresses with the first three bits of 001 or
2000::/3 are being assigned
ICANN allocates IPv6 address blocks to the five RIRs
IPv6 Unicast Addresses
IPv6 Unicast Addresses
Structure of an IPv6 Global Unicast Address (cont.)
Structure of an IPv6 Global Unicast Address (cont.)
A global unicast address has three parts: Global Routing Prefix, Subnet
ID, and Interface ID.
Subnet ID is used by an organization to identify subnets within its site
Global Routing Prefix is the prefix or network portion of the address
assigned by the provider, such as an ISP, to a customer or site,
currently, RIRs assign a /48 global routing prefix to customers.
Interface ID
Equivalent to the host portion of an IPv4 address.
Used because a single host may have multiple interfaces, each
having one or more IPv6 addresses.
2001:0DB8:ACAD::/48 has a prefix that indicates that the first 48 bits
(2001:0DB8:ACAD) is the prefix or network portion.
IPv6 Unicast Addresses
Static Configuration of a Global Unicast Address
IPv6 Unicast Addresses
Static Configuration of an IPv6 Global Unicast Address
(cont.)
Windows
IPv6
Setup
IPv6 Unicast Addresses
Dynamic Configuration of a Global Unicast Address
using SLAAC
Stateless Address Autoconfiguraton (SLAAC)
A method that allows a device to obtain its prefix, prefix length and
default gateway from an IPv6 router
No DHCPv6 server needed
Rely on ICMPv6 Router Advertisement (RA) messages
IPv6 routers
Forwards IPv6 packets between networks
Can be configured with static routes or a dynamic IPv6 routing
protocol
Sends ICMPv6 RA messages
IPv6 Unicast Addresses
Dynamic Configuration of a Global Unicast Address using
SLAAC (cont.)
The IPv6 unicast-routing command enables IPv6 routing.
RA message can contain one of the following three options:
SLAAC Only Uses the information contained in the RA message.
SLAAC and DHCPv6 Uses the information contained in the RA
message and get other information from the DHCPv6 server,
stateless DHCPv6 (for example, DNS).
DHCPv6 only The device should not use the information in the
RA, stateful DHCPv6.
Routers send ICMPv6 RA messages using the link-local address as
the source IPv6 address
IPv6 Unicast Addresses
IPv6 Unicast Addresses
Dynamic Configuration of a Global Unicast Address
using SLAAC (cont.)
Dynamic Configuration of a Global Unicast Address using
DHCPv6 (cont.)
Dynamic Host Configuration Protocol for IPv6 (DHCPv6)
Similar to IPv4
Automatically receives addressing information, including a global
unicast address, prefix length, default gateway address and the
addresses of DNS servers using the services of a DHCPv6 server.
Device may receive all or some of its IPv6 addressing information
from a DHCPv6 server depending upon whether option 2 (SLAAC
and DHCPv6) or option 3 (DHCPv6 only) is specified in the ICMPv6
RA message.
Host may choose to ignore whatever is in the routers RA message
and obtain its IPv6 address and other information directly from a
DHCPv6 server.
IPv6 Unicast Addresses
IPv6 Unicast Addresses
Dynamic Configuration of a Global Unicast Address
using DHCPv6 (cont.)
EUI-64 Process or Randomly Generated
EUI-64 Process
Uses a clients 48-bit Ethernet MAC address and inserts another 16
bits in the middle of the 46-bit MAC address to create a 64-bit
Interface ID.
Advantage is that the Ethernet MAC address can be used to
determine the interface; is easily tracked.
EUI-64 Interface ID is represented in binary and comprises three parts:
24-bit OUI from the client MAC address, but the 7th bit (the
Universally/Locally bit) is reversed (0 becomes a 1).
Inserted as a 16-bit value FFFE.
24-bit device identifier from the client MAC address.
IPv6 Unicast Addresses
IPv6 Unicast Addresses
EUI-64 Process or Randomly Generated (cont.)
EUI-64 Process or Randomly Generated (cont.)
10
IPv6 Unicast Addresses
IPv6 Unicast Addresses
EUI-64 Process or Randomly Generated (cont.)
Dynamic Link-local Addresses
Randomly Generated Interface IDs
Depending upon the operating system, a device can use a randomly
generated Interface ID instead of using the MAC address and the EUI64 process.
Beginning with Windows Vista, Windows uses a randomly generated
Interface ID instead of one created with EUI-64.
Windows XP (and previous Windows operating systems) used EUI-64.
Link-Local Address
After a global unicast address is assigned to an interface, an IPv6enabled device automatically generates its link-local address.
Must have a link-local address that enables a device to communicate
with other IPv6-enabled devices on the same subnet.
Uses the link-local address of the local router for its default gateway
IPv6 address.
Routers exchange dynamic routing protocol messages using linklocal addresses.
Routers routing tables use the link-local address to identify the nexthop router when forwarding IPv6 packets.
IPv6 Unicast Addresses
Dynamic Link-local Addresses (cont.)
IPv6 Unicast Addresses
Static Link-local Addresses
Dynamically Assigned
The link-local address is dynamically created using the FE80::/10 prefix
and the Interface ID.
Configuring Link-local
IPv6 Unicast Addresses
IPv6 Global Unicast Addresses
Static Link-local Addresses (cont.)
Verifying IPv6 Address Configuration
Configuring Link-local
Each interface has
two IPv6 addresses 1. global unicast
address that was
configured
2. one that begins
with FE80 is
automatically
added as a linklocal unicast
address
11
IPv6 Global Unicast Addresses
Verifying IPv6 Address Configuration (cont.)
IPv6 Multicast Addresses
Assigned IPv6 Multicast Addresses
IPv6 multicast addresses have the prefix FF00::/8
There are two types of IPv6 multicast addresses:
Assigned multicast
Solicited node multicast
IPv6 Multicast Addresses
Assigned IPv6 Multicast Addresses (cont.)
IPv6 Multicast Addresses
Assigned IPv6 Multicast Addresses (cont.)
Two common IPv6 assigned multicast groups include:
FF02::1 All-nodes multicast group
All IPv6-enabled devices join
Same effect as an IPv4 broadcast address
FF02::2 All-routers multicast group
All IPv6 routers join
A router becomes a member of this group when it is enabled
as an IPv6 router with the ipv6 unicast-routing global
configuration mode command.
A packet sent to this group is received and processed by all
IPv6 routers on the link or network.
IPv6 Multicast Addresses
Solicited Node IPv6 Multicast Addresses
Similar to the all-nodes
multicast address,
matches only the last 24
bits of the IPv6 global
unicast address of a
device
Automatically created
when the global unicast or
link-local unicast
addresses are assigned
Created by combining a
special
FF02:0:0:0:0:0:FF00::/104
prefix with the right-most
24 bits of its unicast
address
IPv6 Multicast Addresses
Solicited Node IPv6 Multicast Addresses (cont.)
The solicited node multicast
address consists of two parts:
FF02:0:0:0:0:0:FF00::/104
multicast prefix First
104 bits of the all solicited
node multicast address
Least significant 24-bits
Copied from the right-most
24 bits of the global unicast
or link-local unicast address
of the device
12
ICMP
ICMP
ICMPv4 and ICMPv6 Messages
ICMPv6 Router Solicitation and Router
Advertisement Messages
ICMP messages common to both ICMPv4 and ICMPv6 include:
Host confirmation
Destination or Service Unreachable
Time exceeded
Route redirection
Although IP is not a reliable protocol, the TCP/IP suite does provide
for messages to be sent in the event of certain errors, sent using the
services of ICMP.
ICMPv6 includes four new protocols as part of the Neighbor Discovery
Protocol (ND or NDP):
Router Solicitation message
Router Advertisement message
Neighbor Solicitation message
Neighbor Advertisement message
Router Solicitation and Router Advertisement Message Sent
between hosts and routers.
Router Solicitation (RS) message RS messages are sent as an
IPv6 all-routers multicast message.
Router Advertisement (RA) message RA messages are sent by
routers to provide addressing information.
ICMP
ICMP
ICMPv6 Router Solicitation and Router
Advertisement Messages (cont.)
ICMPv6 Neighbor Solicitation and Neighbor
Advertisement Messages
Two additional message types:
Neighbor Solicitation (NS)
Neighbor Advertisement (NA) messages
Used for address resolution is used when a device on the LAN
knows the IPv6 unicast address of a destination, but does not
know its Ethernet MAC address.
Also used for Duplicate Address Detection (DAD)
Performed on the address to ensure that it is unique.
The device sends an NS message with its own IPv6 address
as the targeted IPv6 address.
ICMP
ICMPv6 Neighbor Solicitation and Neighbor
Advertisement Messages (cont.)
Testing and Verification
Ping Testing the Local Stack
13
Testing and Verification
Ping Testing Connectivity to the Local LAN
Testing and Verification
Traceroute Testing the Path
Traceroute
Generates a list of hops that were successfully reached along the
path.
Provides important verification and troubleshooting information.
Testing and Verification
Ping Testing Connectivity to Remote
IP Addressing
Summary
IP addresses are hierarchical with network, subnetwork, and host
portions.
An IP address can represent a complete network, a specific host, or
the broadcast address of the network.
If the data reaches the destination, then the trace lists the interface
of every router in the path between the hosts.
The subnet mask or prefix is used to determine the network portion of
an IP address. Once implemented, an IP network needs to be tested
to verify its connectivity and operational performance.
If the data fails at some hop along the way, the address of the last
router that responded to the trace can provide an indication of
where the problem or security restrictions are found.
DHCP enables the automatic assignment of addressing information
such as IP address, subnet mask, default gateway, and other
configuration information.
Provides round-trip time for each hop along the path and indicates
if a hop fails to respond.
IP Addressing
IP Addressing
Summary (cont.)
Summary (cont.)
IPv4 hosts can communicate one of three different ways: unicast,
broadcast, and multicast.
There are three types of IPv6 addresses: unicast, multicast, and
anycast.
The private IPv4 address blocks are: 10.0.0.0/8, 172.16.0.0/12, and
192.168.0.0/16.
An IPv6 link-local address enables a device to communicate with other
IPv6-enabled devices on the same link and only on that link (subnet).
The depletion of IPv4 address space is the motivating factor for moving to
IPv6.
Packets with a source or destination link-local address cannot be
routed beyond the link from where the packet originated.
Each IPv6 address has 128 bits verses the 32 bits in an IPv4 address.
IPv6 link-local addresses are in the FE80::/10 range.
The prefix length is used to indicate the network portion of an IPv6
address using the following format: IPv6 address/prefix length.
ICMP is available for both IPv4 and IPv6.
14
