Scribd
Upload
6K views

Lab Report Bod Exp 4

This document describes an experiment to determine the amount of dissolved oxygen in a lake water sample from Shah Alam using the Azide Winkler method. Through observations, the sample was found to contain oxygen as indicated by an orange-brown color forming with manganese sulfate and changing to yellow with sulfonic acid, proving oxygen's presence. Calculations were then performed to quantify the dissolved oxygen level. The method involves trapping oxygen using reagents to form precipitates, then titrating with sodium thiosulfate to determine the dissolved oxygen concentration.

Uploaded by

ridzuwan rahimi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
6K views

Lab Report Bod Exp 4

This document describes an experiment to determine the amount of dissolved oxygen in a lake water sample from Shah Alam using the Azide Winkler method. Through observations, the sample was found to contain oxygen as indicated by an orange-brown color forming with manganese sulfate and changing to yellow with sulfonic acid, proving oxygen's presence. Calculations were then performed to quantify the dissolved oxygen level. The method involves trapping oxygen using reagents to form precipitates, then titrating with sodium thiosulfate to determine the dissolved oxygen concentration.

Uploaded by

ridzuwan rahimi
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 5

ABSTRACT

From this experiment, we have determined the amount of dissolved oxygen from the
lake water in Shah Alam sample that we had collected. Through the observations, we noticed
that the lake water sample that we had collected contain the oxygen, dissolved oxygen by it
properties showing the orange-brown color with precipitates when added with Manganese
Sulphate Powder Pillow with Alkali Iodide Azide Reagent Powder Pillow. When added with
sulfonic acid powder, the water sample have a color yellow, which both of the results proved
the existence of oxygen in the water sample. Using a few series of calculations, we have
determined the amount of dissolved oxygen in the lake water sample.

INTRODUCTION

Dissolved oxygen (DO) level is refers to the amount of oxygen dissolve in water and
is particularly important in aquatic ecology. Without an appreciable level of DO, many kinds
of aquatic organisms cannot exist in water. A high DO level is needed for the aquatic
organism to live and it makes drinking water taste better than usual. High DO level is
important to every living organism. However, industries reduce to least possible amount of
dissolved oxygen in order to reserve it pipeline from corrode.

The level of DO in water is dependent on many physical, chemical, and biochemical


factorsaeration, wind, velocity of water flow, algae, temperature, atmospheric pressure,
organic compounds, salt content, bacteria, and animals. Algae produce oxygen during
photosynthesis under sunlight. However, this process is really not an efficient means of
oxygenating water because some of the oxygen formed by photosynthesis during the daylight
hours is lost at night when the algae consume oxygen as part of their metabolic processes.
When algae die, the degradation of their biomass also consumes oxygen.

Temperature has a significant impact on the solubility of oxygen in water. Increasing


the temperature will normally decrease the DO concentration in water. It is important to
distinguish between oxygen solubility, which is the maximum DO concentration at
equilibrium, and the actual concentration of DO, which is generally not the equilibrium
concentration and is limited by the rate at which oxygen dissolves. Water saturated with
oxygen at 25oC contains 8.4 mg/L.

The colorimetric method offers a basic approximation of dissolved oxygen


concentrations in a sample. There are two methods designed for high-range and low-range
dissolved oxygen concentrations. These methods are quick and inexpensive for basic projects,
but limited in scope and subject to error due to other redoxing agents that may be present in
the water .The traditional method is the Winkler titration. While this method was considered
the most accurate and precise for many years, it is also subject to human error and is more
difficult to execute than the other methods, particularly in the field. The Winkler method now
exists in seven modified versions which are still used today.

Therefore, in this experiment, we will determine the amount of dissolve oxygen in


water by using a selected procedure that is Azide Winkler Method. Here, we had checked the
dissolve oxygen in the sample and it must be comply with Malaysian Standard of Water
Quality.

OBJECTIVES
1) To learn the specific sampling technique in determining dissolved oxygen concentration
in water samples.
2) To determine the dissolved oxygen in water samples.

THEORY

Winkler test is used in this experiment in order to measure the concentration of


dissolved oxygen (DO) in a water sample. In this method, excess manganese (II) sulphate
will react with the alkali-iodide azide reagent that is an iodide ion (I - ) and potassium
hydroxide ion (OH-) ion in water to form a white precipitate Mn(OH)2. Alkali-iodide azide
also composed of NaN3 that is an alkali azide compound that will eliminated the nitrile
interference that can interfere the reaction of reducing or oxidizing substances in this test.
MnSO4+2KOH

Mn(OH)2+K2SO4

(1)

If oxygen is present inside the water, the Mn(OH) 2 will react further to form an
orange- brown precipitate, manganic oxide (MnO(OH)2) but if the oxygen is not present
inside the water sample, the colour of the white precipitate will remain unchanged.
2Mn(OH)2 + O2

2MnO(OH)
(2)

Sulfamic acid powder pillow, H3NSO3 is added, which dissolves the manganic oxide
and in together with the potassium iodide, KI added earlier, forms iodine (I2), that had give
the orange colour to the sample:
2Mn(OH)2 + 4H3NSO3
2Mn(SO4)2 + 4KI

2Mn(SO4)2 + 6 H2O (3)


2MnSO4 + 2K2SO4 + 2I2- (4)

Then, by referring table 1, a sample of volume of the solution is taken and poured into
a graduated cylinder.
Range

Sample volume

Titration Cartridge,

Catalog

Digit

(mL)

N (Na2S2O3)

Number

Multiplier

200

0.200

22675-01

0.01

2-10

100

0.200

22675-01

0.02

>10

200

0.200

14401-01

0.10

(mg/L
D.O)
1-5

The quantity of iodine is measured by titrating with sodium thiosulfate (Na2S2O3)

until the orange colour from I2 becomes pale yellow as yellow plastic straw.
4 Na2S2O3+ 2I2

2Na2S4O6+ 4NaI

(5)

Starch is added near the end of the titration to measure if there is any unreacted
iodine,I2 in the solution as the starch will give a dark blue colour in the presence of I 2 and
gives a more obvious colour of endpoint for the test. Then, it is titrated again with sodium
thiosulphate solution until the colour of the solution becomes colourless
The available quantity of MnO(OH)2 formed in the first step is directly proportional to
the dissolved oxygen, and the amount of iodine formed in the second step is directly
proportional to the MnO(OH)4. So, the titration of sodium thiosulphate solution measures a
quantity of iodine directly related to the original dissolved oxygen concentration. Therefore,
by calculating the amounts of sodium thiosulphate used by recording the digits at the body of
the mechanical titrator and multiply its by the digit multiplier given at a sample volume we
had used like in the table 1.
In test 2, we used oxygen powder pillow 1 and 2 to trap the oxygen that gives the
yellow colour of oxygen and then inserted oxygen powder pillow 3 to dissolve any precipitate
and titrate it with sodium thiosulphate as in test 1.
Digits required X Digit Multiplier = ____mg/L Dissolved Oxygen (6)

Here, we obtained the amount of dissolved oxygen in the sample of water that we had
used in this experiment.

APPARATUS AND MATERIALS


Apparatus:
60ml BOD bottle
300ml BOD bottle
Measuring cylinder
250ml Erlenmeyer flask
Straight-stem delivery tube
Beaker
0.2000 N Sodium Thiosulfate Titration Cartridge
Dropper
Stopper

Reagent :

Sample water
Dissolved Oxygen1 Reagent Powder Pillow
Dissolved Oxygen 2 Reagent Powder Pillow
Dissolved Oxygen 3 Reagent Powder Pillow
0.2000 N Sodium Thiosulfate
ManganousSulfate Powder Pillow
Alkaline Iodide-Azide Reagent Powder Pillow
Sulfamic acid Powder Pillow
Two 1mL droppers of starch indicator solution.

You might also like