Scribd
Upload
146 views

Modbus PLC Communications Basic

MODBUS is a simple and inexpensive communications protocol that allows devices to communicate over a single twisted pair wire. It uses a master-slave architecture, where the master communicates with multiple slaves to read and write data. MODBUS/TCP encapsulates MODBUS packets in TCP/IP packets, allowing devices to communicate over Ethernet networks. RS-232 is a popular protocol for connecting devices like data loggers to computers via serial ports, but it has limitations in distance and noise tolerance. RS-485 specifications allow connection of up to 32 devices and can exceed distances of RS-232. Fieldbus collects vast amounts of process and instrument data in addition to process variables and control signals.

Uploaded by

Shola Daley
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
146 views

Modbus PLC Communications Basic

MODBUS is a simple and inexpensive communications protocol that allows devices to communicate over a single twisted pair wire. It uses a master-slave architecture, where the master communicates with multiple slaves to read and write data. MODBUS/TCP encapsulates MODBUS packets in TCP/IP packets, allowing devices to communicate over Ethernet networks. RS-232 is a popular protocol for connecting devices like data loggers to computers via serial ports, but it has limitations in distance and noise tolerance. RS-485 specifications allow connection of up to 32 devices and can exceed distances of RS-232. Fieldbus collects vast amounts of process and instrument data in addition to process variables and control signals.

Uploaded by

Shola Daley
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MODBUS

It is design as a means of communicating with many devices over a


single twisted pair wire. Is the most popular industrial protocol being
used today, for good reasons. It is simple, inexpensive, universal and
easy to use. Even though MODBUS has been around since past centurynearly 30 years almost all major industrial instrumentation and
automation equipment vendors continue to support it in new products.
MODBUS is still the protocol that most vendors choose to implement in
new and old devices.
MODBUS AS A MASTER SLAVE
MODBUS is a master slave system, where the master communicates
with one or multiple slave.
The master typically is a PLC [programmable logic controller], PC, DCS
[distribution control system] or RTU [remote terminal unit].
A MODBUS RTU slaves are often field devices, all of which connect to
the network in a multidrop configuration. When a MODBUS RTU master
wants information from a device, the master sends a message that
contains the devices address, data it wants, and a checksum for error
detection. Every other device on the network sees the message, but
only the device is addressed responds.
MODBUS/TCP
MODBUS/TCP is often referred to as MODBUS over Ethernet.
MODBUS/TCP is simply MODBUS packet encapsulated in standard
TCP/IP packets. This enables MODBUS/TCP device to immediately and
easily communicate over existing Ethernet and fiber network.
MODBUS/TCP also allows many more addresses than RS485, the use of
multiple masters and speeds in the gigabit range. MODBUS/TCP
networks can have as many slaves as the physical layer can handle.
Often this number is somewhere around 1,024.

Ethernets rapid adoption within the process control and automation


industry has allowed MODBUS/TCP to become the most widely used,
fastest growing and supported industrial protocol over Ethernet.
Although PLC vendors of all size have adopted their own proprietary
protocols over Ethernet, almost all of them support MODBUS/TCP.
RS 232
RS232 is a popular communications protocol for connecting modem
and data acquisition devices to computer.RS232 can be plugged straight
into the computers serial port [also known as the COM or COMMS port]
examples of data acquisition device are GPS receivers, data loggers and
other measurement instruments.
RS STANDARD
The standard of RS232 was defined to connect a computer to a
modem. Any other used is outside of the standard.
RS232 serial communications used fixed voltage values and generally
allow you to connect to only one device. The fixed voltage signals are
subject to noise and distance problems.
RS 485
RS 485 specifications include the ability to connect to 32 devices.
Modem RS 485 device driver can often exceed this standard. Not all
converters are equal, however. Extensive use of our converters by our
customer has shown our converters to be reliable even when other
converters are not.
FIELDBUS
One of the most important aspects of foundation field bus is its ability
to collect and deliver vast amounts of information. Not only process
variables and control signals. But other types of instrument and
process data as well.

You might also like