Scribd
Upload
292 views

Remote Sensing - X-Ray Notes

This document discusses the production and use of X-rays in remote sensing and medicine, including how X-rays are produced via thermionic emission and the acceleration of electrons, the two types of X-rays produced (Bremsstrahlung and characteristic), and applications of X-ray imaging including taking pictures of bones and other organs for medical diagnosis.

Uploaded by

Jk Jeeks
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
292 views

Remote Sensing - X-Ray Notes

This document discusses the production and use of X-rays in remote sensing and medicine, including how X-rays are produced via thermionic emission and the acceleration of electrons, the two types of X-rays produced (Bremsstrahlung and characteristic), and applications of X-ray imaging including taking pictures of bones and other organs for medical diagnosis.

Uploaded by

Jk Jeeks
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 21

Topic 29:

Remote Sensing
29.1 Production and use of X-rays
29.2 Production and uses of ultrasound
29.3 Use of magnetic resonance as an imaging technique

Remote Sensing in Medicine


Non-invasive technique
No surgery
No trauma
No infection

X-ray
MRI
Ultra-sound
CT

X-Ray
X-ray has long
been used to
take pictures
of broken
bones

Production of X-Ray
Electrons emitted at the cathode is
accelerated through the vacuum tube
to hit the metal block anode.
On hitting the
target 90% of
the energy is
converted to
heat, 10% or
less to X-ray

Thermionic
Emission: The
cathode is heated
by electrical
means and
electrons are
emitted

The anode has to


be cooled by
various methods.
To produce X-ray, p.d. between anode
and cathode must be 20 kV 100 kV

Production of X-Ray
X-rays are produced by two main mechanisms and
come in two varieties.
Bremsstrahlung X-rays
Characteristic X-rays

The resultant spectrum has two components

Bremssthrahlung X-rays
Bremsstrahlung is a German word meaning braking
radiation which describes the process of X-ray
generation.
The high speed electron impacts on the target and at the
atomic level approaches the nucleus.
There is no actual collision between electron and nucleus
because the electron interacts with the Coulombic
nuclear forces and its vector quantities of direction and
velocity are changed.
The change in energy is radiated as electromagnetic
radiation. The large amount of energy means a short
wavelength within the X-ray band.
As the electron is not destroyed, it can undergo multiple
interactions, and even initial interactions will vary from
minor to major energy changes depending on the
actual angle and proximity of attack, and the point of
'impact' on the nucleus.
As a result, bremsstrahlung radiation will have continuous
spectrum where the maximum energy relates to the
entire KE of the electron.
maximum kinetic energy of an electron = eV = hc /

Characteristic
X-rays
Some of the bombarding electrons will collide with
the orbitting electrons. Sufficient energy in such
collisions can result in the ejection of an orbiting
electron. 'Sufficient energy' means enough to
overcome the bonding energy of the orbiting
electron.
The impacting electron will move off with reduced
energy, and the ejected electron will move off in a
different direction and speed with the remaining
energy,
There is an empty position in one of the shells. The
remaining orbiting electrons will 'pack down' to fill
the hole, and when changing orbits will lose energy
and emit this as radiation.
The orbiting levels are fixed as a physical property
fixing the elemental identity of an atom, and so the
energy emission will be characteristic of that atom.
The energy will be mono-energetic and so appear as
a spike rather than a continuous spectrum. Electrons
ejected come from the n = 1, 2 and 3 orbits. The atom
becomes an ion as it has lost an ejected electron.
All atoms will produce characteristic radiation but
not all are visible in the X-ray portion of the
electromagnetic spectrum. Tungsten and
Mobydenum have theirs in the X-ray region.

Cooling of the Anode

The anode is either water-cooled or is made to


spin rapidly so that the target area is increased

Intensity of the X-ray beam


The intensity of the X-ray beam is determined
by the rate of arrival of electrons at the metal
target, that is, the tube current.
This tube current is controlled by the heater
current of the cathode.
The greater the heater current, the hotter the
filament and hence the greater the rate of
emission of thermo-electrons.

Hardness of the X-ray beam


The hardness of an X-ray beam refers to its penetration
power.
The hardness is controlled by the accelerating voltage
between the cathode and the anode.
More penetrating X-rays have higher photon energies and
thus a larger accelerating potential is required.
Referring to the spectrum of X-rays produced, it can be
seen that longer wavelength X-rays (softer X-rays) are also
produced.
These X-ray photons are of such low energy that they
would not be able to pass through the patient.
They would contribute to the total radiation dose without
any useful purpose.
Consequently, an aluminium filter is frequently fitted
across the window of the X-ray tube to absorb the soft Xray photons.

Example

Solution:

X-ray Imaging
X-ray radiation affects photographic
plates
X-ray beams are used to obtain
shadow pictures of the inside of the
body to assist in the diagnosis or
treatment of illness.
If a picture is required of bones, this
is relatively simple since the
absorption by bone of X-ray photons
is considerably greater than the
absorption by surrounding muscles
and tissues.
X-ray pictures of other parts of the
body may be obtained if there is
sufficient difference between the
absorption properties of the organ
under review and the surrounding
tissues.

Quality of the Image


The quality of the shadow picture (the image)
produced on the photographic plate depends on its
sharpness and contrast.
Sharpness is concerned with the ease with which
the edges of structures can be determined. A sharp
image implies that the edges of organs are clearly
defined.
An image has good contrast if there is a marked
difference in the degree of blackening of the image
between one organ and another.

To Obtain Sharp Images


The X-ray tube is designed to generate a beam of X-rays
with minimum width. Factors in the design of the X-ray
apparatus that may affect sharpness include:

To Obtain Sharp Image

To Obtain Sharp Image

To Obtain Good Contrast


Use a contrast medium. For example, the stomach
may be examined by giving the patient a drink
containing barium sulphate. Similarly, to outline blood
vessels, a contrast medium that absorbs strongly the Xradiation would be injected into the bloodstream.
The contrast of the image produced on the
photographic film is affected by
exposure time,
X-ray penetration and
scattering of the X-ray beam within the patients body.

Contrast may be improved by backing the photographic


film with a fluorescent material.

Attenuation of X-ray
Attenuation refers to the reduction of intensity.
The intensity of the X-rays is reduced as it
travels through a medium.
I = I0ex
is the linear absorption coefficient or linear
attenuation coefficient of the medium.
The unit of is mm1 or cm1 or m1.
x is the thickness of the medium passed through

Half-value Thickness (HVT)

The half-value thickness x or HVT is the thickness of the medium


required to reduce the transmitted intensity to one half of its initial
value.
It is a constant and is related to the linear absorption coefficient by
the expression

x = ln2.
In practice, x does not have a precise value as it is constant only when
the beam has photons of one energy only.

Example

Solution:

Homework
Compare the imaging process of X-ray with that
of MRI, CT and ultrasound.
List its advantages and disadvantages compared to
each of them.

You might also like