Scribd
Upload
112 views

Alpha LPW2 G-Build Technical Data Sheet

This document provides technical specifications for the LPW2 G-Build engine from Lister Petter's ALPHA Series. The LPW2 is a liquid-cooled, 2-cylinder diesel engine that produces between 7.5-14.2 kW of power at fixed speeds of 1500, 1800, and 3000 rpm. It has a displacement of 0.930 liters and is designed for continuous operation in temperatures up to 122°F. The document lists the engine's dimensions, weights, fuel system, lubrication system, emissions compliance, and optional features.

Uploaded by

Cristian S Cárdenas Rivera
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
112 views

Alpha LPW2 G-Build Technical Data Sheet

This document provides technical specifications for the LPW2 G-Build engine from Lister Petter's ALPHA Series. The LPW2 is a liquid-cooled, 2-cylinder diesel engine that produces between 7.5-14.2 kW of power at fixed speeds of 1500, 1800, and 3000 rpm. It has a displacement of 0.930 liters and is designed for continuous operation in temperatures up to 122°F. The document lists the engine's dimensions, weights, fuel system, lubrication system, emissions compliance, and optional features.

Uploaded by

Cristian S Cárdenas Rivera
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

ALPHA Series

LPW2 G-Build Engine


LPW2
Power ranges: 7.514.2 kW; 10.119.7 bhp
Fixed speeds: 1500, 1800, 3000 r/min

Durable, reliable, easy to maintain liquid-cooled G-Build diesel engine


Special Attributes

500-hour service intervals


designed for continuous operation in ambient
temperatures up to 52C (122F)
cold-start capability down to -32C (-25.6F)

Basic Engine Characteristics


diesel fuelled
direct injection
2 cylinders
liquid cooled
naturally aspirated

Design Features and Equipment


heavy-duty air cleaner*
Polyvee fan/alternator drive belt*
inlet and exhaust manifolds
inlet manifold heater plugs*
fuel lift pump
self--vent fuel system with individual fuel
injection pumps
fuel filter/agglomerator
gear-driven positive displacement type
lubricating oil pump
spin-on lubricating oil filter
12V starter motor*
12V battery charge alternator
safety switches*
fuel control solenoid (energised to run)*
mechanical governing
radiator with fan and belt guard*
flywheel with ring gear; 7.5" heavy flywheel for
1500/1800 r/min
SAE 5 flywheel housing (SAE 4 optional)
standard skid base packing
operators handbook

* Optional items standard on most builds.

Emissions

Complies with EU Stage 3A exhaust emissions


regulations.

Optional Items

oil cooler
24V battery charge alternator
increased oil sump capacity (deep sump)
See also items with asterisk under Design Features
and Equipment.
A range of options allows you to select a specification
that matches your requirements; please consult your
Lister Petter distributor.

page 1

ALPHA Series: LPW2 G-Build Engines Technical Data Sheet

Approximate Dimensions and Weight1

Power Outputs*
Power

r/min

Continuous
Intermittent
(Fuel Stop)

1500

1800

3000

7.5

9.3

13.4

bhp 10.1

12.5

18.0

kW

10.2

14.7

13.7

19.7

kW

8.2

bhp 11.0

Dry weight
Length (A)
Width (B)
Height (C)

kg
lb
mm
in
mm
in
mm
in

*Rating Definitions, to ISO 3046


ISO Standard Conditions

Barometric pressure................................................... 100 kPa


Relative humidity................................................................ 30%
Ambient temperature at air inlet manifold...................... 25C

Fixed speed power: continuous power (ICN)

The power in kW which the engine is capable of delivering continuously at the stated crankshaft speed, under ISO standard
conditions, measured at the flywheel without power-absorbing
accessories, provided that the engine is overhauled and maintained in good operating condition and that fuel to BS EN 590
Class A1 or A2, and lubricating oils to the correct performance
specification and viscosity classification as recommended by
Lister Petter Limited, are used.

Fixed speed power: overload power (ICXN)

The maximum power in kW which the engine is capable of


delivering intermittently at the stated crankshaft speed for a
period not exceeding one hour in any period of twelve hours
continuous running, immediately after working at the continuous power, under ISO standard conditions and with the provisions specified for continuous power above.

De-rating

For non-standard site conditions, reference should be made


to relevant BS, ISO and DIN standards.
Notes: 1. Power ratings measured at the flywheel apply to a fully
run-in, non derated engine without a radiator and fan fitted, and
without power absorbing accessories or transmission equipment. 2. The overload capability applies to a fully run-in engine.
This is normally attained after a running period of about 50
hours. 3. Excluding radiator.

112
247
699
27.5
512
20.2
647
25.5

p
C
q

Technical Data
Type of fuel injection
Number of cylinders
Aspiration
Direction of rotation (flywheel end)
mm
in
mm
in
litre
in3

Nominal cylinder bore


Stroke
Total cylinder capacity
Compression ratio
Firing order (number 1 cylinder is at the gear end)
Number of flywheel ring gear teeth

kgf
lbf
mbar
in
mbar
in
bar
lbf/in2

Maximum continuous crankshaft


end thrust
Maximum permissible intake restriction
at full rated speed and load
Maximum permissible exhaust
back pressure
Lubricating oil pressure at 3000r/min
and with the oil at 110C (230F)

Direct
2
Natural
Anticlockwise
86.0
3.39
80.0
3.15
0.930
56.75
18.5:1
12
96
180
400
25
10
75
30
2.0
29

Distributors Address

Lister Petter have made efforts to ensure that


the information in this data sheet is accurate
but reserve the right to amend specifications and
information without notice and without obligation
or liability.

page 2

UK

Lister Petter Limited, Dursley, Gloucestershire


GL11 4HS England
Tel: +44 (0)1453 544141; fax: +44 (0)1453 546732
E-mail: [email protected] http://www.lister-petter.co.uk

P027-08376, March 2009

You might also like