Project Study (Sample Revised Feb 2015)
Project Study (Sample Revised Feb 2015)
A Project Study
Presented to the Faculty of the
College of Engineering
Manuel S. Enverga University Foundation
University Site, Lucena City
In Partial Fulfillment of the Requirements
For the Degree
Bachelor of Science in Computer Engineering
Under the
Expanded Tertiary Education Equivalency Accreditation Program
( ETEEAP )
By Ronaldo C. Maano
March 2013
Approval Sheet
Accepted in partial fulfillment of the requirements for the Degree Bachelor of Science in
Mechanical Engineering.
Acknowledgements
The Author
Dedication
( NOTE : Place at the center of the page : horizontally and vertically )
Table of Contents
Page No.
Title Page
Approval Letter
Acknowledgement
Dedication
Table of Contents
List of Tables
List of Figures
Abstract
Unit I
1
2
3
4
5
INTRODUCTION
Background of the study
Objectives of the study
Significance of the study
Scope and Delimitation
Conceptual framework
Definition of terms
Acronyms
Nomenclature
Unit II
Unit III
Unit IV
Unit V
References
Appendices
Curriculum Vitae
11
12
13
14
List of Tables
Table Number
Title
Page
3.1
Likert Scale
48
List of Figures
Figure Number
4.1
Title
Block diagram of the prototypes main circuit board
Page
57
Abstract
Ronaldo C. Maano , Design and Development of a Microcontroller-based Rainfall Monitoring
System, Unpublished project paper for the Degree Bachelor of Science in Computer
Engineering, College of Engineering, Manuel S. Enverga University Foundation, March, 2013.
Keywords : rainfall , microcontroller-based , etc.
Unit I
Introduction
Background of the study
Objectives of the study
The main aim of this study is to come up with solution to the problem in . by
Specifically this research is focused on the following objectives :
Significance of the study
Scope and Delimitation
Conceptual framework
Definition of terms
Acronyms
ASTM
cPs
Centipoises
Unit II
Review of related studies and literature
10
Unit III
Methods and Procedures
Research Design
Research Environment
Procedures
Data gathering procedures
Design processes
Testing procedures
Evaluation processes
Design Concepts
11
Unit IV
Results and discussion
12
Unit V
Conclusions and Recommendations
13
References
Anniecum , R. ( 2010 ). Research and its environment. New Jersey : John Wiley & Sons, 23
35.
Ayaton, P.B., Ramirez, R., Ramirez, J., Zoleta, R.P., Jones, J., Sons, J.R., et.al. ( 2010 ). A case
study on the use of viscometer. Philippines : BIV Printing Press, 1315 1342.
Barlizo, R.P. ( 2011). The functions of viscometer. Philippines : Lucena Printing Press.
Barlizo, R.P. ( 2010). Impacts of the use of viscometer. Philippines : Lucena Printing Press.
Calvario, R.P. ( 2009 ). Viscometer : Characteristics, functions and advantages. Enverga
Newsletter, 92, 310 330.
Calvario, R.P. ( 2008 ). A proposed design of a viscometer. Unpublished project study in Manuel
S. Enverga University Foundation, Lucena City. 310 330.
Grady, F.G. ( 2007 ). Viscometer. Tool for liquid viscosity determination, 12, 145-167. Retrieved
January 9, 2010, from http://www.rpbr.com.ph/tools/Grady02302.html
Ramirez, R. & Ramirez, J. ( 2010 ) Functions of viscometer. New Jersey : Academic Press.
Ramirez, R. ( 2009 ). Viscometer functions. New York : Mc Graw Hill Company.
14
Appendices
15
Curriculum Vitae
Personal Data
Educational Information
Employment History
Reference
Photo