Ordering number : EN1536B
CMOS LSI
LC4966
Quad Bilateral Switch
Overview
Package Dimensions
The LC4966 is an IC that provides the same functions as
the MLC4066B and the MLC4066BH over an expanded
usable voltage range. The LC4966 provides four
bidirectional switch circuits. These circuits form a lowimpedance conducting path between the input and output
sides when the corresponding control input (CONT) is set
high, and form a high-impedance nonconducting open
circuit when the control input is set low.
unit: mm
3003A-DIP14
[LC4966]
SANYO: DIP14
Specifications
Absolute Maximum Ratings at Ta = 25C, VSS = 0 V
Parameter
Maximum supply voltage
Input voltage
Output voltage
Input current
Potential difference between input and
output when on
Lead soldering temperature time
Allowable power dissipation
Symbol
Conditions
Ratings
Unit
VDD max
VSS 0.5 to VSS + 40
VIN
VSS 0.5 to VDD + 0.5
VOUT
VSS 0.5 to VDD + 0.5
IIN
10
mA
VI-VO
0.5
Tsol
Pd max
t = 10 s
260
Ta 85C, IIN = 10 mA
300
mW
Operating temperature
Topr
40 to +85
Storage temperature
Tstg
65 to +150
Allowable Operating Ranges at Ta = 40 to +85C
Parameter
Symbol
Conditions
Ratings
Unit
Supply voltage
VDD
3 to 37
Input voltage
VIN
0 to VDD
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
42696HA (OT) No. 1536-1/6
LC4966
Equivalent Circuit
(1/4 LC4966)
Pin Assignment and Equivalent Circuit Block Diagram
Electrical Characteristics at Ta = 25 2C, VSS = 0 V
Parameter
Input high-level control voltage
Input low-level control voltage
Symbol
VIH
VIL
Conditions
min
typ
max
Unit
VDD = 5 V,
for a current between input and output > 10 A
3.5
VDD = 10 V,
for a current between input and output > 10 A
8.0
VDD = 15 V,
for a current between input and output > 10 A
12.5
VDD = 20 V,
for a current between input and output > 10 A
17.0
VDD = 30 V,
for a current between input and output > 10 A
27.0
VDD = 37 V,
for a current between input and output > 10 A
34.0
VDD = 5 V,
for a current between input and output < 10 A
1.0
VDD = 10 V,
for a current between input and output < 10 A
2.0
VDD = 15 V,
for a current between input and output < 10 A
2.5
VDD = 20 V,
for a current between input and output < 10 A
2.5
VDD = 30 V,
for a current between input and output < 10 A
3.0
VDD = 37 V,
for a current between input and output < 10 A
3.0
Continued on next page.
No. 1536-2/6
LC4966
Continued from preceding page.
Parameter
Symbol
Conditions
max
Unit
110
220
VDD = 5 V, VIN = 2.5 V, I = 1 mA
90
180
VDD = 5 V, VIN = 0.25 V, I = 1 mA
110
220
VDD = 5 V, VIN = 5 V, I = 1 mA
On resistance
Input off leakage current
Quiescent current drain
RON
IOFF
IDD
min
typ
VDD = 10 V, VIN = 10 V, I = 3 mA
70
140
VDD = 10 V, VIN = 5 V, I = 3 mA
50
100
VDD = 10 V, VIN = 0.25 V, I = 3 mA
70
140
VDD = 15 V, VIN = 15 V, I = 3 mA
60
120
VDD = 15 V, VIN = 7.5 V, I = 3 mA
40
80
VDD = 15 V, VIN = 0.25 V, I = 3 mA
60
120
VDD = 20 V, VIN = 20 V, I = 3 mA
60
120
VDD = 20 V, VIN = 10 V, I = 3 mA
40
80
VDD = 20 V, VIN = 0.25 V, I = 3 mA
60
120
VDD = 30 V, VIN = 30 V, I = 3 mA
50
100
VDD = 30 V, VIN = 15 V, I = 3 mA
35
70
VDD = 30 V, VIN = 0.25 V, I = 3 mA
50
100
VDD = 37 V, VIN = 37 V, I = 3 mA
45
90
VDD = 37 V, VIN = 19 V, I = 3 mA
30
60
VDD = 37 V, VIN = 0.25 V, I = 3 mA
45
90
VDD = +5 V, VIN = 5 V, VIN = 5 V, I = 3 mA
70
140
VDD = +5 V, VSS = 5 V, VIN = 0.25 V, I = 3 mA
50
100
VDD = +5 V, VSS = 5 V, VIN = 5 V, I = 3 mA
70
140
VDD = +7.5 V, VSS = 7.5 V, VIN = 5 V, I = 3 mA
60
120
VDD = +7.5 V, VSS = 7.5 V, VIN = 0.25 V, I = 3 mA
40
80
VDD = +7.5 V, VSS = 7.5 V, VIN = 5 V, I = 3 mA
60
120
VDD = +10 V, VSS = 10 V, VIN = 10 V, I = 3 mA
60
120
VDD = +10 V, VSS = 10 V, VIN = 0.25 V, I = 3 mA
40
80
VDD = +10 V, VSS = 10 V, VIN = 10 V, I = 3 mA
60
120
VDD = +15 V, VSS = 15 V, VIN = 15 V, I = 3 mA
50
100
VDD = +15 V, VSS = 15 V, VIN = 0.25 V, I = 3 mA
35
70
VDD = +15 V, VSS = 15 V, VIN = 15 V, I = 3 mA
50
100
VDD = +18.5 V, VSS = 18.5 V, VIN = 18.5 V, I = 3 mA
45
90
VDD = +18.5 V, VSS = 18.5 V, VIN = 0.25 V, I = 3 mA
30
60
VDD = +18.5 V, VSS = 18.5 V, VIN = 18.5 V, I = 3 mA
45
90
VDD = 37 V, VIN = 37 V, VOUT = 0 V
500
nA
VDD = 37 V, VIN = 0 V, VOUT = 37 V
500
nA
VDD = 5 V
0.001
VDD = 10 V
0.001
VDD = 15 V
0.002
VDD = 20 V
0.004
VDD = 25 V
0.01
20
VDD = 30 V
0.02
40
VDD = 35 V
0.04
80
VDD = 37 V
0.1
160
Input high-level control current
IIH
VDD = 37 V, VIN = 37 V
104
Input low-level control current
IIL
VDD = 37 V, VIN = 0 V
104
7.5
pF
Input capacitance
CIN
Control inputs
Switch input and outputs
10
pF
No. 1536-3/6
LC4966
Switching Characteristics at Ta = 25 2C
Parameter
Transmission time (IN to OUT)
Transmission time
(control OUT)
Maximum control input frequency
Maximum transmission frequency
Sine wave total harmonic
distortion
Feedthrough (switch off state)
Symbol
tPLH, tPHL
tPLH, tPHL
f max (c)
f max (I-O)
Conditions
min
typ
max
Unit
VDD = 5 V, RL = 10 k, CL = 50 pF
15
45
ns
VDD = 10 V, RL = 10 k, CL = 50 pF
10
30
ns
VDD = 15 V, RL = 10 k, CL = 50 pF
25
ns
VDD = 20 V, RL = 10 k, CL = 50 pF
25
ns
VDD = 25 V, RL = 10 k, CL = 50 pF
25
ns
VDD = 30 V, RL = 10 k, CL = 50 pF
25
ns
VDD = 35 V, RL = 10 k, CL = 50 pF
25
ns
VDD = 37 V, RL = 10 k, CL = 50 pF
25
ns
VDD = 5 V, RL = 10 k, CL = 50 pF
100
200
ns
VDD = 10 V, RL = 10 k, CL = 50 pF
40
70
ns
VDD = 15 V, RL = 10 k, CL = 50 pF
35
60
ns
VDD = 20 V, RL = 10 k, CL = 50 pF
35
60
ns
VDD = 25 V, RL = 10 k, CL = 50 pF
35
60
ns
VDD = 30 V, RL = 10 k, CL = 50 pF
35
60
ns
VDD = 35 V, RL = 10 k, CL = 50 pF
35
60
ns
VDD = 37 V, RL = 10 k, CL = 50 pF
35
60
VDD = 5 V, CL = 15 pF
1.0
MHz
VDD = 10 V, CL = 15 pF
1.0
MHz
VDD = 20 V, CL = 15 pF
1.0
MHz
VDD = 30 V, CL = 15 pF
1.0
MHz
VDD = 37 V, CL = 15 pF
1.0
MHz
VDD = +5 V, VSS = 5 V, RL = 10 k, CL = 15 pF*1
35
MHz
ns
VDD = +10 V, VSS = 10 V
40
MHz
VDD = +15 V, VSS = 15 V
50
MHz
VDD = +18.5 V, VSS = 18.5 V
50
MHz
VDD = +5 V, VSS = 5 V, RL = 10 k, f = 1 kHz*2
0.010
VDD = +10 V, VSS = 10 V
0.005
VDD = +15 V, VSS = 15 V
0.005
VDD = +18.5 V, VSS = 18.5 V
0.005
VDD = +5 V, VSS = 5 V, RL = 10 k*3
MHz
VDD = +10 V, VSS = 10 V
MHz
VDD = +15 V, VSS = 15 V
MHz
VDD = +18.5 V, VSS = 18.5 V
MHz
Note 1. Vis is a 2.5 Vp-p sine wave; fmax: 20log (Vos/Vis) = the 3 dB frequency.
2. Vis is a 2.5 Vp-p sine wave.
3. Vis is a 2.5 Vp-p sine wave. Frequency (feedthrough): 20log(Vos/Vis) = 50 dB
No. 1536-4/6
LC4966
Test Circuits and Waveforms
Unit (resistance: , capacitance: F)
1. tPLH, tPHL (IN-OUT) Test Circuit
2. tPLH, tPHL (Control-OUT) Test Circuit
3. RON Test Circuit
4. Feedthrough Test Circuit
5. Crosstalk
6. Frequency Response (f max) and Total Harmonic Distortion
No. 1536-5/6
LC4966
No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace
equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of
which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and
distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all
damages, cost and expenses associated with such use:
Not impose any responsibility for any fault or negligence which may be cited in any such claim or litigation on
SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees
jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for
volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied
regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of December, 1997. Specifications and information herein are subject to
change without notice.
No. 1536-6/6
This datasheet has been download from:
www.datasheetcatalog.com
Datasheets for electronics components.
