Bulletin Number 825-P

Bulletin 825-P
Modular Protection System

The Bulletin 825-P Modular Protection System for motors

offers a compact, modular design that uniquely allows an
installer to configure a devices functional capabilities to
match the application requirements. Flexibility is also afforded
by accommodating future expansion of the system as the
application requirements grow. Ease of installation is
provided through pluggable options and accessories. Finally,
this next generation design offers greater capabilities with
the option of full metering for line voltage and power
monitoring in addition to expanded RTD monitoring.

Product Profile

System Overview
Basic Unit
0.5 ... 5000A Current Range
Suitable for Low- and Medium-Voltage Applications
Built-in Keypad and Backlit 2-Line LCD
Test / Reset Button
Status LEDs
Front accessible RS 232 port
Wide Supply Voltage Range (110...240V AC/DC)
Three Output Relays
Two Configurable Inputs
PTC thermistor Input
Core Balance Current Transformer Input
Fiber Optic Port for Remote RTD Scanner
Three option card slots
NEMA 12 (IP65) Housing

Converter Modules
Compact Three-Phase current transformer modules
Provides electrical isolation
Six current ranges
0.5 ... 2.5 A
2.5 ... 20 A
20 ... 180 A
160 ... 630 A
Compatibility with MCS PLUS Bulletin 100-D contactors

Core Balance Current Transformer

Sensitive, low level ground fault detection
100:1 ratio
110 mm window opening
Note: The 825-P is compatible with core balance current
transformer ratios of 1:1 to 2000:1.

RTD Scanner Module

12-channel inputs
Compatible with 100 Platinum, 100 Nickel, 120 Nickel,
and 10 Copper type RTDs
Can be remote mounted near the motor, simplifying wiring
Class 1, Division 2, Group T4A rated
Noise immune fiber optic connection to the Basic Unit
Channels are individually configurable for RTD type and
location (winding, bearing, ambient, or other).

Option Cards
Voltage Input
Input terminations for VA, VB, VC and VN
Enables voltage and power measurement and related
protection functions
Accommodates potential transformers for levels
exceeding 250V AC
DeviceNet or Modbus Communications
Direct network access for control and monitoring
DeviceNet communications card features DeviceLogix
component technology for enhanced control capability
DeviceNet communication card provides compatibility with
the IntelliCENTER software
Expansion I/O
Three Configurable Inputs
Four Auxiliary Relay Outputs
4 ... 20mA Isolated Analog Output

The 825-P Modular Protection System

is a key component to Bulletin 1500
medium voltage controllers.

Comprehensive Protection
The 825-P Modular Protection System offers in-depth motor protection coverage by monitoring the critical elements of motor current, line
voltage and temperature. High resolution settings allow the installer to configure a precise envelope of protection to achieve maximum
motor utilization while avoiding damage and downtime.

ANSII No.
Current Elements
51
46
50G/51G
37
48
50
47
81
86
Voltage Elements
27
59
47
81

Function
Thermal Overload
Current Imbalance / Phase Loss
Ground Fault
Undercurrent (Load Loss)
Overcurrent (Load Jam)
Short Circuit
Phase Reversal
Frequency
Overload Lockout
Undervoltage
Overvoltage
Phase Reversal
Frequency

ANSII No.

Function

Temperature Elements
49
PTC Thermistor
49
Stator STD
38
Bearing RTD

Ambient and Other RTD

Power Elements
37
Underpower
55/78
Power Factor

Reactive Power
Motor Starting Elements
66
Starts / Hour

Start Time Monitoring

14
Speed Switch Monitoring
19
Reduced Voltage Starting
48
Incomplete Start

Note: Voltage and Power elements are only available with the installation of the Voltage Input option card.

Full Function Metering

The 825-P Modular Protection System offers in-depth motor protection coverage by monitoring the critical elements of motor current, line
voltage and temperature. High resolution settings allow the installer to configure a precise envelope of protection to achieve maximum
motor utilization while avoiding damage and downtime.

Current Elements

Voltage Elements

Power Elements

Thermal Elements

Phase Currents
Average Current
% Motor Load
Ground Fault Current

Line-Line Voltages
Avg. Line-Line Voltage
Line-Neutral Voltages
Voltage Imbalance
System Frequency

Real Power (kW)

Reactive Power (kVAR)
Power Factor
Phase Angle

% Thermal Capacity Utilization

RTD Values

Note: Voltage and Power elements are only available with the installation of the Voltage Input option card.

Statistical Values
The 825-P Modular Protection System provides the following valuable statistical values of motor operation:
Elapsed time of operation
Stopped time
Percent of time running
Number of starts
Number of emergency starts
Date and time of last trip reset

Historical Data
The 825-P Modular Protection System saves records for the five most recent trip events. Each trip event is summarized
with record of the following prior to trip data capture:
Event day and time recording
Trip and warning identification
Phase and ground current amplitude and angle values
Voltage amplitude and angle values

Ordering Information
Description

Cat. No.

Basic Unit
Converter Module

825-PD
0.5 ... 2.5A
2.5 ... 20A
20 ... 180A
160 ... 630A

825-MCM2
825-MCM20
825-MCM180
825-MCM630N
825-CBCT
825-PR12D

Core Balance Current Transformer (100:1)

RTD Scanner Module
Option Cards
Voltage Input
Expansion I/O (120V Inputs)
Expansion I/O (24V Inputs)
DeviceNet Communications
Modbus Communications

825-PVS
825-PIOD
825-PIOR
825-PDN
825-PMB

MPS Explorer Sofware

Operation Instructions
Quick Start Guide
Basic Unit User Manual
DeviceNet Card

825-QS001_-EN-P
825-UM004_-EN-P
825-UM005_-EN-P

A basic system requires a basic unit plus one converter module.

Please contact your local Allen-Bradley distributor.
Detailed operation instructions ship separately from the product. Please contact your local Allen-Bradley distributor to obtain printed copies.

Function Overview
Trip Level
Setting Range

Trip Delay
Setting Range

Warning Level
Setting Range

Motor FLA (le)

0.5...5000A

Locked Rotor Current

2.5...12 x le

50...100% TCU

Locked Rotor Time

1...600 sec

Short Circuit

4...12 x le

0.00...5.00 sec

4...12 x le

0.1...1.0 x le

0.00...5.00 sec

0.1...1.0 x le

0.01...25A

0.00...5.00 sec

0.01....25A

Jam

1.0....6.0 x le

0.00...5.00 sec

1.0...6.0 x le

Undercurrent

0.1...1.0 x le

0.0...120.0 sec

0.1...1.0 x le

5...80%

0....240 sec

5...80%

1....240 sec

0...250 C

Disable, Enable

Undervoltage

0.60...1.00 x Vnom

0...120 sec

0.6...1.0 x Vnom

Overvoltage

1.00...1.20 x Vnom

0...120 sec

1.00...1.20 x Vnom

Underpower

1...25,000 kW

0...240 sec

1...25,000 kW

Power Factor

0.05...0.99

0...240 sec

0.05...0.99

1...25,000 kVAR

0...240 sec

1...25,000 kVAR

45...55 / 55...65 Hz

0...240 sec

45...55 / 55...65 Hz

1...15

0.240 sec

Description

Ground Fault (Residual)

Ground Fault (Core Balance)

Current Imbalance
Start Monitoring
RTD Temp
Phase Reversal

VAR
Frequency
Start Inhibit (Starts/Hr)
Speed Switch

0...250 C

Main Circuits
825-MCM Converter Modules
Rated Operating
Voltage Ue
IEC
CSA/UL
Rated Impulse
Strength Uimp
Operating Current
Range (A)

825-MCM2
825-MCM5
400V AC
240V AC
2.5kV

825-MCM180
825-MCM420
825-MCM630N
1,000V AC
600C AC
8kV

825-MCM20
690V AC
600V AC
6kV

825-MCM2

825-MCM5

825-MCM20

825-MCM180

825-MCM420

825-MCM630N

0.5-2.5
3

1-5
6

2.5-20
24

20-180
216

160-420
504

160-630
756

30

60

240

1350

3400

4600

Rated Continuous
Thermal Current (A)
Rated Saturation
Current
Rated Frequency

50/60 Hz 3 Hz

Voltage Input Option Card

Inputs

Rated Operating Voltage (Ue)

250V AC max

Operating Range

0.80 ... 1.1 Ue

Rated Continuous Voltage

300V AC

Rated Insulation Voltage (Ui)

300V AC

Rated Impulse Strength (Uimp)

4kV

Rated Frequency

50/60 Hz (5 Hz)

Control Circuits
Supply

Supply Rated Supply Voltage (Us) 110 ... 240V AC

110 ... 250V DC
Operating Range

0.80 ... 1.1 Us

Rated Frequency (V AC)

50/60 Hz (5 Hz)

Max. Power Consumption

AC: 15VA, DC: 15 W

Output Relays

Type of Contacts
Trip
Aux1 ... Aux 6

Form C SPDT
Form A SPST - NO

Rated Operating Voltage (Ue)

IN1 and IN2

24V AC/DC

IN3, IN4 and IN5

120V AC/DC

Operating Range

0.80 ... 1.1 Ue

Rated Insulation Voltage (Ui)

300V AC

Rated Impulse Strength (Uimp)

4kV

Rated Frequency (AC)

50/60 Hz (5 Hz)

On-State Voltage

15V

79V

On-State Current (turn-on)

2mA

2mA

Steady State Current (max)

15mA

15mA

Off-State Voltage

5V

20V

Off-State Current

0.5 mA

1 mA

Transition Voltage

5...15V

20...79V

PTC Thermistor Input

Type of Control Unit

Mark A

Max. No. of Sensors in Series

Max. Cold Resistance of PTC

Sensor Chain

1500

Trip Resistance

3400 150

Reset Resistance

1500 ... 1650

Short Circuit Trip Resistance

25 10

Rated Insulation Voltage (Ui)

300V AC

Rated Operating Voltage (Ue)

240V AC

Rated Impulse Strength (Uimp)

4kV

Mechanical Ratings

Rated Thermal Current (Ithe)

5A

Environmental

Rated Operating Current (Ie)

120V AC
240V AC

3A
1.5A

Contact Rating Designation

B300

Utilization Category

AC15

Contact Reliability

5 mA @ 17V

Ambient Temperature Storage

Operating (open)

-40...+85C (-40...+185F)
-20...+60C (-4...+140F)

Humidity (Operating)

5...95% Non-condensing

Maximum Altitude

2000 m

Vibration (per IEC 68-2-6)

3G

Shock (per IEC 68-2-27)

30G

Pollution Degree

Protection Class

825-P
825-MCM

IP65
IP40

Electromagnetic Compatibility

Control Terminals

Terminal Screw

M3

Cross Section (Stranded/Solid)

1 x 0.14...2.5 mm2
1 x 26...12 AWG

Torque

0.79 Nm/7 lb-in

Degree of Protection

IP20

Electrostatic Discharge Immunity

Test Level
Performance Criteria

RF Immunity

Test Level

RTD Scanner Module

8kV Air Discharge

Performance Criteria

10V/m
1

Supply

Rated Supply Voltage (Us)

110/240V AC

Operating Range

0.80 ... 1.2 Us

Rated Frequency

50/60 Hz (5 Hz)

Max. Power Consumption

5 VA

Rated Insulation Voltage (Ui)

300V AC

Rated Impulse Strength (Uimp)

4kV

Surge Immunity

Ambient Temperature Storage

-40...+85C (-40...+185F)

Performance Criteria

Operating (open)

-20...+60C (-4...+140F)

Emissions

Humidity (Operating)

5...95%, Non-condensing

Radiated Emissions

Class A

Maximum Altitude

2000 m

Conducted Emissions

Class A

Vibration (per IEC 68-2-6)

3G

Shock (per IEC 68-2-27)

30G

Pollution Degree

Protection Class

IP 40

Electrical Fast Transient/Burst Immunity

Test Level
Performance Criteria

Test Level

Environmental

Environment 2.

12

Standards

Type

3-wire

CSA C22.2 No. 14

Compatibility

CU10
NI100
NI120
PT100 (per IEC 60751: 1983)

EN 60947-4-1

Accuracy
Open Circuit Detection

> 250C

Short Circuit Detection

< -50C

Degree of Protection

IP20

2kV L-E
1kV L-L
1

degradation or loss of performance.

Number of input channels

-50...250 C
2C

Performance criteria 1 requires the DUT to experience no

Inputs

Range

4kV (Power)
2kV (Control and Comms)

EN 60947-5-1
UL 508

Basic Connection Diagram

GROUND CT

L1

M
3

L2
L3

5
3

MCM

L1

L2

L3

MCM

RTD SCANNER

T1

T2

S1

S2

VOLTAGE INPUT OPTION

BK
VBU CAN_L
DNET
OPTION SH DRAIN
WH CAN_H
RD
V+

33
AUX 3
34
43
EXPANSION
I/O
OPTION

AUX 4

44
53

1
2
MOD3
BUS
OPTION 4
5

AUX 5

54
63

+TX
-TX
+RX
-RX
SH

A1 +
A2

825-P
MODULAR
PROTECTION
SYSTEM
RELAY

ANALOG
OUTPUT
I+

COM IN3

IN4

Y2-

Y22

96
98

13
14

IN5
IN1

I-

120/240V AC/DC

95
TRIP

AUX1/
ALARM

AUX 6

64

COM

23

IN2

AUX2

Y24 Y26

Rx

Y12

Y1-

Y14

24

500m MAX
FIBER OPTION

RTD1

5
RTD2

10 11 12 13 14 15 16 17 18

RTD3

RTD4

RTD5

RTD6

23
120V AC
24

825-P RTD SCANNER

RTD7

RTD8

RTD9

27 28 29 30 31 32 33 34 35

RTD10

25
RTD11

RTD12

240V AC

26

36 37 38 39 40 41 42 43 44

[Link]
Corporate Headquarters
Rockwell Automation, 777 East Wisconsin Avenue, Suite 1400, Milwaukee, WI, 53202-5302 USA, Tel: (1) 414.212.5200, Fax: (1) 414.212.5201
Headquarters for Allen-Bradley Products, Rockwell Software Products and Global Manufacturing Solutions
Americas: Rockwell Automation, 1201 South Second Street, Milwaukee, WI 53204-2496 USA, Tel: (1) 414.382.2000, Fax: (1) 414.382.4444
Europe/Middle East/Africa: Rockwell Automation SA/NV, Vorstlaan/Boulevard du Souverain 36, 1170 Brussels, Belgium, Tel: (32) 2 663 0600, Fax: (32) 2 663 0640
Asia Pacific: Rockwell Automation, Level 14, Core F, Cyberport 3, 100 Cyberport Road, Hong Kong, Tel: (852) 2887 4788, Fax: (852) 2508 1846
Headquarters for Dodge and Reliance Electric Products
Americas: Rockwell Automation, 6040 Ponders Court, Greenville, SC 29615-4617 USA, Tel: (1) 864.297.4800, Fax: (1) 864.281.2433
Europe/Middle East/Africa: Rockwell Automation, Herman-Heinrich-Gossen-Strasse 3, 50858 Kln, Germany, Tel: 49 (0) 2234 379410, Fax: 49 (0) 2234 3794164
Asia Pacific: Rockwell Automation, 55 Newton Road, #11-01/02 Revenue House, Singapore 307987, Tel: (65) 6356 9077, Fax: (65) 6356 9011
Publication 825-PP011B -EN-P March 2005
Supercedes Publication 825-PP011A-EN-P April 2003

Copyright 2004 Rockwell Automation, Inc. All rights reserved. Printed in USA.