Scribd
Upload
2K views

DSP Question Paper PDF

This document is an exam for a Digital Signal Processing course. It contains 15 multiple choice and numerical response questions covering various topics in digital signal processing, including linear time-invariant systems, circular convolution, the discrete Fourier transform and its computation using FFT algorithms, filtering using techniques like overlap-add and overlap-save, filter design using Butterworth and Chebyshev approximations, multirate signal processing concepts like decimation and interpolation, and image enhancement techniques. The exam is worth a total of 100 marks and tests students on both theoretical concepts and practical applications of digital signal processing.

Uploaded by

Raja Prabhu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
2K views

DSP Question Paper PDF

This document is an exam for a Digital Signal Processing course. It contains 15 multiple choice and numerical response questions covering various topics in digital signal processing, including linear time-invariant systems, circular convolution, the discrete Fourier transform and its computation using FFT algorithms, filtering using techniques like overlap-add and overlap-save, filter design using Butterworth and Chebyshev approximations, multirate signal processing concepts like decimation and interpolation, and image enhancement techniques. The exam is worth a total of 100 marks and tests students on both theoretical concepts and practical applications of digital signal processing.

Uploaded by

Raja Prabhu
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 3

B.E / B.

Tech (Full-Time) Degree End Semester Examinations, April/May 2014


Anna University, Chennai

Computer Science and Engineering


Sixth Semester
CS9351 - Digital Signal Processing

(Regulations 2008)
Time: 3Hrs

Max Marks: 100


Answer ALL Questions

Part A - (10 * 2 = 20 marks)


1. Check whether y(n) = e is LTIS or not.
2. Compute the circular convolution of x(n) = {2,-1,0,1} and y(n) = {1,2,-1,-2}.
3. Prove that the multiplication of DFTs of two sequences is equivalent to the
circular convolution of the two sequences in the time domain.
4. Does FFT algorithm reduce the number of multiplications required to compute a
single point of the DFT? Justify your answer.
5. Give the analog transformation for band pass filter as well as band stop filter.
6. Explain the realization of linear phase FIR system.
7. How to prevent errors due to overflow of signals?
8. What is the impact of using each bit in the A/D conversion in the signal-to-noise
power ratio?
9. What are the steps involved in speech compression?
10. How does adaptive filter help in channel equalization? Illustrate with neat
diagram.
x(n)

Part B - ( 5 * 16 = 80 marks)

11. i. Determine the response, y(n) of the following system:


h (n) = u(n+4) - u(n-3), x(n) = u(n+2) - u(n-2) - 5(n-3).

(5)

ii. Determine the cross-correlation between x(n) and y(n) in (i).

(5)

ii. Determine the Z-transform and ROC for the following sequence

(6)

x(n) = 3 u(n+2)- 4 u(-n-2)


n

12. a. i.Compute the FFT using DIF algorithm for the sequence given by
x(n) = 2 ,N=8.
(10)
ii. An FIR filter has the unit impulse response sequence h(n)={3,2,l}.
Determine the output sequence in response to x(n)= {2,4,0,-1,2,3,-1,1,-2,3,-2}
using overlap save method.
(6)
n

(OR)

b. i. Compute the inverse FFT using DIT algorithm for X(k) = {20, -5.828-j2.414,
0, -0.172-j0.414, 0, -0.172+j0.414, 0, -5.828+j2.414}.
(10)
ii. An FIR filter has the unit impulse response sequence h(n)={ 1,1,1}.
Determine the output sequence in response to x(n)= {2,-1,0,-2,-2,-3,1,0,1,2,2}
using overlap add method.
(6)

13. a. Design a low pass Butterworth filter for the following specification: (16)
Passband gain: 0.8
Passband edge: - 02n rad/ sec
Stop band attenuation : 0.2
Stop band edge : 0.67i rad / sec
Use bilinear transformation technique with T = 1 sec and realize the designed
filter in parallel form.
(OR)

b. Design a low pass Chebyshev filter for the following specification.


(16)
Passband gain : -2.5dB
Passband edge: 200 rad/ sec
Stop band attenuation: - 25dB
Stop band edge : 300 rad / sec
Convert it into a HPF with pass band edge frequency and realize in Direct form II.
14. a. i . Design a FIR low pass filter for the following specification and realize it
using cascade form.
H (o)) = e"
\(o\<n/4
j4a)

=0

(7i/4) < |co| < %

Use Harming window for terminating the desired frequency response.

(12)

ii. Explain the quantisation effects in Analog to Digital conversion.

(4)

(OR)

b. i. Design a FIR low pass filter for the following specification using Frequency
sampling method and realize it using Direct form structure.
(12)
Pass band edge: 400 Hz
Stop band begins at: 800 Hz
Sampling frequency: 4000 Hz
Filter Length: 10
ii. Explain Limit cycle oscillations and product quantisation.

(4)

15. a. Define Multirate signal processing. Explain decimation and interpolation in


detail with necessary diagrams.
(16)
(OR)

b. Explain various Image enhancement techniques in spatial as well as frequency


domain.
(16)

You might also like