T E T R A D ATA S H E E T
e X T R A S S O LO
eXTRAS SOLO
TETRA BASE STATION
The SOLO is a compact, fully-featured single carrier TETRA base station that has
been specifically designed to meet the demands of users in sectors such as airports,
public transport, manufacturing, public safety, oil and gas and other industrial
organisations. Easy to transport and install, this 25W (at the duplexer) base station
can be deployed either as a standalone single site or as part of a network.
Scalable, flexible and user-friendly
Easy to install and commission
Outstanding performance
Complete with full suite of applications
Low cost of ownership
Going further in critical communications
T E T R A D ATA S H E E T
e X T R A S S O LO
In addition, the SOLO also offers:
Low power consumption
Dual diversity, to provide extra versatility
IP connectivity
Non-GPS operation to ensure suitability for in-building /
tunnel usage
Comprehensive set of applications (call logging, dispatcher,
AVL, voice recording)
Full suite of gateways (SDS, packet data, telephony)
Selection (two in, four out) of i/o lines for interconnectivity with
external systems/devices (such as alarm systems)
Capability to link two SOLOs together to create a two-carrier base
station or to provide full redundancy of site controller
Secondary control channel capability (C-SCCH)
High Mean Time Between Failures (MTBF) and availability
Encryption options, including air-interface encryption
and end-to-end encryption, supported by a full key
management capability
Capability to link to Sepura systems including FR400 to provide a
cost-effective network extension
Enhanced fall-back mode (local database for registration, group
calls, individual calls, SDS, packet data)
Approvals for operation in a wide range of countries
(including FCC/IC approvals for North America,
and EU approval)
Backed both by Sepura Systems extensive and thorough TETRA
knowledge and background and by its professional and
highly-trained support capability, the SOLO is a key tool in
making your TETRA network more efficient and cost-effective.
eXTRAS SOLO
TETRA BASE STATION
Transmit power
Configurable up to +44dBm (25W) at the duplexer output
Configurable power output
28 to 44dBm in -2dB steps programmable
Duty cycle
100% duty cycle for all four channels in parallel is possible
Receiver
Class A per ETS300-392-2
Static sensitivity
@4%BER (TCH 7.2) -117.5 dBm without diversity
@4%BER (TCH 7.2) -120.0 dBm with diversity
Dynamic sensitivity
@4%BER (TCH 7.2) TU50 -112dBm without diversity
Gain at 2 x diversity
2dB min, typical 5dB, depending on antenna configuration
Duplex separation
5MHz /10MHz duplex spacing
Dimensions
WxHxD: 455 x 220 x 287 mm
Weight
<19 kg
Supply power
115-240V AC
Power consumption
170W (typical) at 25W transmit power (at top of cabinet)
Operational temperature
-10C to +55C
Sepura plc. For more information visit sepura.com
0019_0215_V1.1_English