Scribd
Upload
170 views

5g Data Sheet

The SKYWAN 5G is a flexible satellite modem that can act as either a hub or master station in a star, multi-star, hybrid or mesh network topology. It has a dual demodulator design that supports both TDMA and DVB-S2, allowing one unit to support all common VSAT network types. Multiple units can also be cascaded at one location to add additional TDMA receivers. The modem provides high performance and flexibility along with simplified logistics and operations.

Uploaded by

Salvador Gómez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
170 views

5g Data Sheet

The SKYWAN 5G is a flexible satellite modem that can act as either a hub or master station in a star, multi-star, hybrid or mesh network topology. It has a dual demodulator design that supports both TDMA and DVB-S2, allowing one unit to support all common VSAT network types. Multiple units can also be cascaded at one location to add additional TDMA receivers. The modem provides high performance and flexibility along with simplified logistics and operations.

Uploaded by

Salvador Gómez
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

l e st

Smal
HUB ket
r
e ma
h
t
n
o

S2

ND SATCOM
SKYWAN 5G

YOUR 5G HIGHLIGHTS

The SKYWAN 5G is an MF-TDMA modem with integrated


DVB-S2 receiver. No matter if you request a star, multi star,
hybrid or full mesh network, the unique hardware design
of SKYWAN 5G reliably fits all existing topologies within
the VSAT world. Each unit can act either as a HUB or so
called Master Station, therefore adding agility in terms of
its network role. Geographical redundancy of the master
station is already built-in. The device is so flexible that you
can change your topology at a later point, use the unit for
other networks or even split or pool networks together.

Flexibility in Topologies
Reliable for Applications
Attractive in Pricing
Powerful in Performance
Simplicity in Hardware

If additional TDMA receive carriers are needed in one


place you can easily cascade units to one stack, all controlled by the prime unit independent of the number
of locations. Since the optional available DVB outbound
channel is not used for signalisation, multiple independent DVB carriers can be used in one network. In addition
to the ACM support in DVB, an automatic registration at
the DVB gateway is supported to simplify operation.

O
 ne unit for all cases simplified logistics
C
 ascading of stacked units to one node
D
 ual demodulator TDMA + DVB-S2
B
 PSK-16APSK (24 MODCODs) for TDMA
T DMA mod/demod up to 12Msps /20Mbps
D
 VB-S2 receiver IP output up to 55Mbps
A
 CM in DVB-S2 with auto registration at DVB-HUB
H
 igh performance IP power with up to 140.000pps
IP router incl. OSPF, BGP, GRE, VRF, VLAN etc.
Q
 uality of Service based on PHB classes and
multiple Tx queues
Built-in automatic geographical redundancy
of master node
NMS as virtual appliance and Web-GUI
Order your feature set as you need and extend
later on

Application & feature support for:


Air Traffic Control Networks
Energy Sector, Oil & Gas
Access for rural Wireless /Cellular Networks
Disaster Recovery & Emergency Response
Closed Enterprise Networks
Governmental & Administration Networks

KEY FEATURES

TECHNICAL SPECIFICATIONS
VSAT NETWORK
Network Topology
Type & Number of Demodulators
Access Type TDMA
Encoding for TDMA
Access Type TDM/DVB-S2*
Access Scheme
Stacking
Modulation & FEC Code Rates

Es/No (BER 10-7, incl. margin)


Channel Spacing/Roll-off TDMA
Modem Symbolrate TDMA Tx/Rx
User Data Rate TDMA
Modem Symbolrate TDM/DVB-S2
User Data Rate TDM/DVB-S2
VSAT Data Throughput

Star / Hybrid / True Full Mesh


1x MF-TDMA modulator, 1x TDMA demodulator (home channel) + 1x DVB-S2 receiver (ETSI)
MF-TDMA for all direction communication with fast frequency hopping in Tx and fixed Rx home channel
Turbo-
DVB-S2 receiver with Adaptive Coding-and Modulation (ACM) support / MPE and ULE support
Bandwidth-on-Demand / real-time / non-real-time / guaranteed throughput / QoS classes
Cascading of multi (max 4) units to one stack (with prime controller) for ad. TDMA demods on each node
TDM - DVB-S2
TDMA
QPSK: 2/5 / 1/2 / 3/5 / 2/3 / 3/4 / 4/5 /
BPSK: 1/3 / 2/5 / 4/9 / 1/2 / 2/3
5/6 / 8/9 / 9/10
QPSK: 1
 /3 / 2/5 / 4/9 / 1/2 / 3/4 /
8PSK: 3/5 / 2/3 / 3/4 / 5/6 / 8/9 / 9/10
4/5 / 5/6 / 6/7
16APSK: 2/3 / 3/4 / 4/5 / 5/6 / 9/10
8PSK: 2/3 / 3/4 / 4/5 / 5/6 / 6/7
32APSK: 3/4 / 4/5 / 5/6 / 8/9 / 9/10
16APSK: 2/3 / 3/4 / 4/5 / 5/6 / 6/7
from 1dB (QPSK 1/2) 18,2dB (32APSK 9/10)
from 0,6dB (QPSK 2/5) 9,5dB (16APSK 6/7)
1.1 , 1.2 , 1.4 / 0.1 , 0.2 , 0.4
200 KBaud 12 MBaud, variable in 1 KBaud increments
Up to 20 Mbit/s in each direction on LAN port / carrier user data rate starting ~64kbps, slot assigned traffic starting
~4kbps
Up to 45 MBaud (in-build receiver)
Up to 160Mbps per DVB channel | Rx: Up to 55-60Mbps IP traffic on LAN port (dep avg packet length)
Switching packet rate TDMA and LAN switch up to 140.000pps, DVB-S2 receiver up to 12.000pps

INTERFACES
LAN Interface
Enhanced Features

Serial RS232/Console
Aux-Port
Display and 5-button switch
USB-A 2.0 ports
Tx Modulator Port
Rx Demodulator Port

Four 10/100/1000 Base-T Ethernet RJ-45 ports, independent and individual configurable interfaces
IPv4/v6* / Static Routing / OSPF / BGP/ Load Balancing* / Robust Header Compression RoHC* / Multi VRF support (up to 4 groups) and VLAN / GRE* / Traffic Filtering and Shaping for QoS based on configurable PHB rules
(up to 14 classes per VRF) / DiffServ / DHCP*
SUB DB-9S socket for management access via command line interface
8 pin connector DIN 45326 contains Rx lock signal (5 VDC) indicator and Tx inhibit with cable detect support
Notification of status information (reception level, IP-adr. etc.)
Front panel port for image updates and configuration loads, rear port for WLAN, UMTS/LTE projects (opt.)
F-connector (75Ohm female) L-Band 950 2150 MHz / -3 - 23 dBm ( -43dBm for dynamic range)
F- connector (75Ohm female) L-Band 950 2150 MHz / -30-70 dBm
common used Rx port for DVB-S2 and TDMA receiver

ODU SUPPORT
10 MHz reference signal
LNB
BUC
Others

Configurable by software on Tx and Rx port


Software configurable 0/13/18VDC support, 22kHz signal internal /external PLL
Software enabled internal 24VDC support, up to 85W on IDU F-connector (typical 6-8W Ku)
Radios with L-Band interface Ka, Ku, Ext Ku, C

NETWORK MANAGEMENT
NMS Platform
NMS Architecture
IDU Management Interfaces

SKYWAN 5G NMS virtual appliance (virtual host not provided)


Web based application, central NMS sever, can be placed everywhere (only IP connectivity needed)
mainly for planning & configuration, network runs without NMS always on or connected
Remote access with in-band management (from central NMS station over satellite), additional SNMP access for
monitoring, local access via WEB-GUI and CLI or integrated console port (RS232)

MECHANICAL / EVIRONMENTAL

Immunity Standard
HEADQUARTERS
ND SatCom GmbH
Graf-von-Soden-Strasse
88090 Immenstaad
Germany
PHONE: + 49 7545 939 0
FAX: + 49 7545 939 8780
E-Mail: [email protected]

44,45 mm (1 RU) x 483 mm (19) x 410 mm (Packing box: 580 x 540 x 159 mm)
Below 3,4kg (without extension cards, but in metal housing and power supply)
100 260 VAC , 50 / 60 Hz , 32 VA nominal (IDU only, without extension cards)
+5 C to +55 C, 5% - 85 % non-condensing
Up to 3000 m above sealevel
Fully CE compliant with RoHS and REACH
EN 301 428 Ku-Band VSAT
EN 301 443 C-Band VSAT
EN 62368 -1 Safety IT Equipment (CB Scheme)
EN 55022 Emission IT Class B
EN 61000 -6 -3 Generic Emission Standard
EN 61000-3-3 Flicker
EN 61000 -3-2 Harmonics
EN 55024 Immunity IT
EN 61000-6-1 Generic Immunity Standard
CHINA
ND SatCom (Beijing) Co. Ltd.
PHONE: +86 10 6590 6869/6878

MIDDLE EAST
ND SatCom FZE
PHONE: +97148865012

* software features available with release updates


www.ndsatcom.com
Apr 2015, Version A.3.

Dimensions (H x W x D)
Weight
Input Power/Power Consumption
Operating Temperature/Humidity
Altitude
Compliance
Radio Standards
Safety
Emission Standards

You might also like