B. Tech.

Course Structure & Syllabus,

Electrical Engineering Department, N.I.T. Silchar
Course No Course Name

L T

C Course Course Name

No

EE-1101

Basic Electrical Engineering

3 0

EE-1111 Electrical Science Laboratory

EE-1201

Circuits and Networks

3 1

EE-1205 Power System-I

EE-1202

Electromagnetic Field Theory

EE-1206 Signals and Systems

EE-1203

Analog Electronics

3 1

EE-1207 Electrical Machines-I

EE-1204

3 0

EE-1208 Digital Electronics

EE-1211

Electrical Measurement and

Measuring Instruments
Measurement Laboratory

0 0

EE-1213 Analog and Digital Electronics Lab

EE-1212

Network Laboratory

0 0

EE-1214 Software Engineering Lab

EE-1301

Electrical Machines-II

3 1

EE-1305 Control System-II

EE-1302

Control System-I

3 1

EE-1306 Power Electronics

EE-1303

Power System-II

3 0

EE-1307 Switchgear & Industrial Protection

EE-1304

3 0

EE-1308 Programming and Data Structure

EE-1311

Microprocessor &
Microcontroller
Electrical Machines Lab-I

0 0

EE-1309 Instrumentation

EE-1312

Control System Lab

0 0

EE-1314 Electrical Machines Lab-II

EE-1313

Microprocessor &
Microcontroller lab

0 0

EE-1315 Process Control & Instrumentation

Lab
EE-1316 Power system Lab

EE-1401
EE-1402

Digital Signal Processing

Industrial Drives

3 0
3 0

0
0

6
6

EE-1403 Analog & Digital Communications

EE-1xxx Departmental Elective - III

3
3

0
0

0
0

6
6

EE-1411

0 0

EE-1xxx Departmental Elective - IV

EE-1421-30

Power Electronics & Drives

Lab
Departmental Elective - I

3 0

EE-1xxx Departmental Elective - V

EE-1431-40

Departmental Elective - II

3 0

XX-1xxx Open Elective - II

Open Elective - I
Project - I

3 0

EE-1491 Project - II

10

10

0 0

xx-1xxx
EE-1490

List of Elective Subjects

EE 1421
EE 1422
EE 1423
EE 1424
EE 1425
EE 1426
EE 1427

Departmental Electives I
High Voltage AC/DC
Flexible AC Transmission System
High Power Semiconductor Devices
Higher Control Systems
Electrical Engineering Materials
Smart Grid
Industrial Management

EE 1431
EE 1432
EE 1433
EE 1434
EE 1435
EE 1436
EE 1437

Departmental Electives II
Computer Applications in Power System
Computer Aided Design of Electrical Systems
Intelligent Algorithms for Power Systems
Advanced Power Electronics and Devices
Power Electronic Control of AC Drives
Advanced Engineering Mathematics
Integrated Circuits and VLSI Design
Departmental Electives III

EE 1441

Restructured Electrical Power System

EE 1442

Electrical Networks and Pricing

EE 1443

Electric Power Utilization and Traction

EE 1444

Smart sensors

EE 1445

Opto Electronics and Fiber Optics

EE 1446

Wind and Solar Energy Systems

Departmental Electives IV
EE 1451

Distribution System Planning and Automation

EE 1452

Demand Side Management

EE 1453

Advance Electrical Machines

EE 1454

Modeling and Simulation

EE 1455

Illumination Technology

EE 1456

Renewable Energy Sources and Management

Departmental Electives V
EE 1461

Power Qualities

EE 1462
EE 1463

Power System Reliability

Foundation in Optimization Methods

EE 1464

Industrial Instrumentation

EE 1465

Biomedical Engineering

EE 1466

Hydro-electric Engineering

Open Elective I
EE 1471

Soft Computing Techniques and Applications

EE 1472

Data Warehousing and data Mining

EE 1473

Neural Networks and Fuzzy Logic

EE 1474

Evolutionary Algorithms in Search & Optimization

EE 1475

Information Securities

EE 1476

Data Based Management System

Open Elective II
EE 1481

Finite Element Methods in Engineering

EE 1482

Human-Computer Interface

EE 1483

Machine Intelligence

EE 1484
EE 1485
EE 1486

Intelligent and Knowledge Based Systems

Computer Organization & Architecture
Extra High Voltage Transmission

EE 1201

Circuits and Networks

L T P C

3rd Semester

3 1 0 8

Electrical Engineering Branch

1. Revision on Network Theorems: Superposition theorem, maximum power transfer theorem,
reciprocity theorem, Millmans theorem, substitution theorem, compensation theorem,
Tellegens theorem, all theorems using examples of AC networks.
2. Two port network: One port and two port network, Sign convention, Admittance Parameter,
Parallel connection of two port network, Impedance parameter, Series connection of two-port
network. Hybrid parameters, Inverse Hybrid parameters, Transmission parameters, Inverse
Transmission parameters, Concept of driving point impedance and admittance, Symmetrical
two ports and bisection, Image impedance.
3. Magnetically coupled circuit: Mutual inductance, Coupling Co-efficient K, Dot rule for
coupled coils, Analysis of coupled circuits, The T-equivalent network of the transformer.
4. Graph Theory : Graph of a network, Trees, Co-trees, Loops, Incidence matrix, cut-set
matrix, Ties matrix and loop currents, Number of possible trees of a Graph, Analysis of Net
works, Network Equilibrium Equation, Duality, General network transformation.
5. Application of Laplace Transform: Brief review of Laplace transform technique, Initial and
final value Theorem, Solution of circuit transient using Laplace transform. Use of Laplaces
transform in electrical circuit analysis.
6. Frequency Response: Concept of complex frequency, The complex frequency plane,
Concept of Pole and Zero, Plot of Poles and Zeros of simple RL, RC and RLC circuit
connected in series and parallel, polar plot, Concept of resonance, series and parallel
resonance, Q factor, half power frequency, Concept of transfer function of a network.
7. Fourier Analysis: Trigonometric Fourier Series, Evaluation of Fourier Coefficients,
Waveform Symmetry, Exponential form, Fourier transform techniques applied in networks.
8. Filter Circuits: Classification of filters, equation of an ideal filter, Theory of pie section,
Constant K-type filters, low pass filters, design of low pass filter, high pass filters, band pass
filters, band rejection filters and all pass filters. M derived filters, theory of M-derived filters,
M-derives low pass and high pass filters. Approximation theory of filters (Butter worth and
Chebyshev).

Reference Books:

SN Author
1.
Hayt & Kemmerly
2.
3.
4.
5.
6.

Title

Publisher

Engineering Circuit Analysis

Mc Graw Hill

Roy Choudhury

Network and Systems

New Age

Rajeswaran

Electric Circuit theory

Pearson

Wadhwa

Network Analysis and Synthesis

New Age

Soni & Gupta

A Course in Electrical Circuit Analysis

Dhanpat Rai & Sons

Van Valkenburg

Network Analysis and Synthesis

PHI

EE 1202

Electromagnetic Field Theory

L T P C

3rd Semester

3 0 0 6

Electrical Engineering Branch

1. Vector Analysis: Introduction, co-ordinatesystem transformation, vector calculus,
Divergence of vector and Divergence theorem, curl of a vector and Stokes theorem, Laplacian
of a scalar, classification of vector fields.
2. Electrostatics: Coulombs law, Electric field strength, field due to a line charge, sheet charge
and volume charge. Electric flux-density, Gausss law (Maxwells first equation in
electrostatics), applications of Gausss law. Electric Potential and potential difference,
Potential of a point charge and system of charges, Conservative property, potential gradient,
dipole. Energy density in electrostatic field.
3. Magnetostatics: Biot-Savarts law- magnetic field due to filamentary current, distributed
current surface and volume currents. Amperes circuital law, Scalar and vector magnetic
potentials. Maxwells equations for steady magnetic fields, force on a current element in a
magnetic field. Force between two current elements and torque in a current loop.
4. Electromagnetic field: Faradays law, Lorentz-force equation, displacement current and
modified Amperes circuital law in integral form. Continuity equation. Power flow in
electromagnetic field - the Poynting theorem, sinusoidally time-varying fields and its
Maxwells equation. The retarded potentials , polarization of vector fields.
5. Materials and fields: Current and current density. Conductors in fields- drift velocity,
mobility, conductivity. Dielectrics in fields- polarization, flux-density, electric susceptibility,
relative permittivity. Magnetic materials, magnetization, permeability and magnetic boundary
conditions.
6. Electromagnetic waves: Helmontz equation, radiation of electromagnetic waves. Wave
motion in free space, perfect dielectric, lossy dielectric, propagation in good conductors-skin
effect. Reflection of plane waves.
S. N.

Author

Name of Book

Publisher

1.

Mathew N.O. Sadiku

Elements of Electromagnetics

Oxford Univ Press

2.

N.N. Rao

Basic electromagnetic and applications

McGraw Hill

3.

Hayt

Engineering Electromagnetics

4.

Bradshaw and Byatt.

Introductory Engineering Field Theory

Prentice Hall

EE 1203

Analog Electronics

3rd Semester

Electrical Engineering Branch

1. Review of PN junction diode: Properties, diode V-I Characteristics, cut-in potential, reverse
saturation, peak-inverse voltage (PIV), diode forward resistance. Diode as a rectifier halfwave and full-wave, rectifier efficiency
2. Linear Wave Shaping: Response to sinusoidal, step, pulse, exponential and Ramp input to
high pass and low pass circuits.
3. Bipolar Junction Transistor: Transistor action, Biasing, bias stability, the operating point,
effect of temperature on Q-point, stability factor. BJT in different modes of operation: as a
switch, as an amplifier.
4. MOSFET: Circuits at DC. MOSFET and BJT as amplifier. Biasing MOS and BJT amplifiers.
Small signal operation and models for MOSFET and BJT. Single stage MOS amplifiers and
BJT amplifiers.
5. BJT configuration: CE, CB and CC configurations. Hybrid- model of transistor in CE
mode, conductance, capacitance, short-circuit current gain, CE current gain with resistive
loads, CE stage as an amplifier and Frequency response.
6. Multi-stage Transistor Amplifiers, Analysis of CE- CE, CE-CC and CE-CB stages,
Darlington pair, Millers Theorem.
7. Operational Amplifiers: Basic building block, Differential stage, gain stage, CMRR, OpAmps as inverting, non-inverting amplifiers, buffers. Applications of Op-Amps: as adder,
subtractor, integrator, differentiator, and Logarithmic functions. Use of Op-Amp as
comparators, zero-crossing detectors and as active filters.
8. Introduction to Feedback Amplifiers: classification and basic concepts of feedback
amplifiers. Loop gain. Stability problem. Basic principle of sinusoidal oscillators. RC
oscillator. LC and crystal oscillator.

Text Books:
SN
1.
2.
3.
4.

Author

Name of Book

Millman & Gravel

Microelectronics

A. S. Sedra and K. C.
Smith
D. L. Schilling and C.
Belove
Robert L. Boylestad

EE 1204

Publisher
Tata-McGraw Hill

Microelectronic Circuits

Oxford University Press, 5th

Edition

Electronic Circuits

Tata McGraw Hill, 3rd Edition

Electronic Devices and Circuit

Theory

Pearson, 8th Edition

Electrical Measurement and Measuring Instruments

L T P C

3rd Semester

3 0 0 6

Electrical Engineering Branch

1. Introduction: Introduction of signals, Measurement and instruments, Static and dynamic
characteristics of instruments. Different types of instruments. Operating forces required for
working of indicating instruments. Different types of damping and control systems.
Construction and working principles of PMMC, MI, Induction type, Electrodynamometer
type, their applications advantages and disadvantages.
2. Galvanometers and dynamics: Dynamic behaviour of Galvanometer - equation of motion
for different damping conditions. Response of galvanometer, operational constants, CDRX,
relative damping, logarithmic decrement, sensibility. Ballistic Galvanometer and Flux meter
construction and theory of operation.
3. Magnetic measurements: Magnetic measurements, types of tests, Ballistic tests,
measurement of flux density, determination of B.H. curve
4. Bridges for measurements: Measurement of resistance (law) by kelvins Double Bridge
Method, insulation resistance by loss of charge method. A.C. & D.C. bridges - Maxwells
commutated D.C. bridge, Anderson bridge, Schering Bridge, Hays Bridge, Wagner Earthing
device, Campbells Mutual Inductance Bridge, Circuit diagram, phasor diagram, derivations
of equations for unknown, O-factor, dissipation factor. Advantages and disadvantages.
5. Potentiometers: Standardization, Principle of working and construction of Crompton,
potentiometer (D.C.) Polar and Co-ordinate type of potentiometers.
6. Measurement of power, power factor and energy: Measurement of power and energy, use
of Current transformer and potential transformer, Electrodynamometer type of Wattmeter,
Induction type energy meter, Indicating type Frequency meter, Electrodynamometer type P.F.
meter.

Reference Books:
SN
1.

Author
A.K. Sawhney.

Name of Book
Electrical & Electronics Measurements and
Instrumentation

Publisher
Dhanpat Rai and Sons

2.

Golding.

A Text Book of Electrical Measurement and

Measuring Instruments

Wheeler Publications

EE 1211

Measurement Laboratory

L T P C

3rd Semester

0 0 2 2

Electrical Engineering Branch

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

To calibrate a three phase Energy Meter by comparing with a Sub standard meter.
Measurement of Power and Power Factor of a three phase circuit.
Measurement of Power in HV circuit using instrument transformer (CT & PT)
To measure high resistance by loss of charge method.
To calibrate Single phase Energy meter by comparing with a substandard meter and also by
calculation.
To measure medium resistance with the help of Wheatstone Bridge.
To measure the low resistance by using Kelvin Double Bridge Method.
a. To measure the Medium resistance using Substitution Method.
b. To measure the value of Earth Resistance.
To measure self inductance of a coil using A.C Andersons Bridge.
To measure capacitance of a given capacitor.
To determine the phase sequence of a three phase supply using phase sequence indicator.

EE 1212

Network Laboratory

L T P C

3rd Semester

0 0 2 2

Electrical Engineering Branch

Hardware Based Experiments:
1.
2.
3.
4.
5.
6.
7.
8.

Measurement of active power and power-factor of a parallel R-C load using three ammeters.
Measurement of active power and power-factor of a series R-L load using three voltmeters.
Measurement of self-inductance of a coil with air and iron as core material separately.
Verification of Thevenins and Nortons theorem in a dc network.
Verification of Maximum power transfer theorem in a dc network.
Familiarization with a single phase wattmeter.
Measurement of power supply frequency with the help of a series RLC tuning circuit.
Calibration of a milliammeter as a voltmeter.

Software Based Experiments:

1. Generation of standard analog and digital signals using MATLAB.
2. To find Laplace transform of a system and its inverse using MATLAB.
3. Transient and steady state analysis of networks using PSPICE.

EE 1205

Power System-I

L T P C

4th Semester

3 1 0 8

Electrical Engineering Branch

1. Introduction to Power Plants: Introduction to conventional sources (Fuel (Coal, Oil, Gas),
atomic (Nuclear), water) and non conventional sources of energy (Solar, wind, Geothermal,
Ocean thermal, Tidal power, Magneto Hydrodynamic (MHD) and Biogas); their scopes for
energy conversion. Power Plants (Conventional): Introduction to thermal, hydro, Nuclear,
Diesel Electric and Gas turbine Power plants, different types of plants, Selection of sites for
each plant, Schematic diagram and working principle of each plant, components of each plant
and their functions, Efficiency of each plant. Power Generation (Non conventional):
Schematic diagram of Solar, wind, Geothermal, Ocean thermal, Tidal power, Magneto
Hydrodynamic (MHD) and Biogas and working principles. Per unit values for steady state
condition, Single line diagram.
2. Economics of Power Systems: Definitions of Load, connected load, demand, Peak load,
Demand intervals, Demand factor, Average load, load factor, Diversity factors, Utilization
factor, capacity factor, load curves, base load, and peak load. Calculations based on the above
factors. Economics of power factor improvement. Tariffs: Structures, Calculation on Tariff
and economics of power factor improvement.
3. Transmission Systems: Introduction to transmission system (TS); Transmission voltages;
classification of TS, advantages of High voltage transmission; comparison of Overhead and
underground supply system; Comparison of AC and DC transmission system; Introduction to
high voltage DC transmission (HVDC) and Flexible AC transmission system (FACTS);
Comparison of conductor materials of various overhead systems; Economic choice of
conductor size, Kelvin's law.
4. Distribution Systems: Introduction to distribution system (DS); Classification of DS;
Feeders, distributors, service mains of a typical DS; Classification of AC DS; Connection
schemes of DS; Methods of calculations of AC DS; Current loading and voltage drop
diagram.
5. Line Constants: Introduction to overhead line (OHL) constants; Copper cross section,
conductor materials, Resistance: Resistance of OHL, Calculations of resistance; Inductance:
Inductance of solid cylindrical conductor, composite conductors, two conductor single phase
line, three phase single circuit and double circuit lines with symmetrical and unsymmetrical
spacing, transposed and un transposed line, Skin and proximity Effects; Capacitance:
Concept, Potential difference between two points due to charge, Capacitance of two wire line,
three phase symmetrical and unsymmetrical line, Charging current, Effect of earth on
capacitance of transmission line.
6. Mechanical Design: Introduction to Mechanical design; Towers: Classification; Design;
Cross arm: Functions, types; Insulators: Functions, types; Vibration damper; Guy wires; turn
buckle; Danger plat etc. Calculation of sag, ice and wind loading; Stringing chart, Sag
template; Voltage distribution of over suspension insulators, string efficiency, Methods of
improving string efficiency; Corona: Disruptive critical and visual critical voltages, Factors
effecting corona, Corona power loss; advantages and disadvantages of corona, radio
interference, induction interference between power and communication lines.
7. Underground Cables: Insulator materials; Construction of single core and three core cables;
classification of cables and their construction; laying of cables; jointing of cables; Stress and
capacitance of single core and three core cables; Most economical size of conductor; Grading
of cables; Types of grading; Breakdown voltages and mechanism of breakdown, thermal
characteristics of cables.
Reference Books

S. N.
1.

Author
C.L. Wadhwa

Name of Book
Electrical Power systems

Publisher
Wiley Eastern

2.

Ashfaq Hussain

Electrical Power System

CBS Publishers

3.

B.R.Gupta

Generation of Electrical Energy

S. Chand.

4.

Soni, Gupta,
Bhatnagar

Electric Power

Dhanpat Rai &

Sons

5.

J.B.Gupta

A course in Power Systems

S. K. Katia & Sons

6.

O.I.Elgerd

Electric Energy system Theory - An Introduction

Tata Mcgraw Hilll

EE 1206

Signals and Systems

L T P C

3rd semester

3 1 0 8

Electrical Engineering Branch

1. Introduction to signals and systems: Introduction to signals, classification of signals, basic

continuous- time and discrete- time signals, step and impulse functions, transformation of
independent variable.
2. Introduction to system: properties of systems, classification of systems, mathematical model
for systems, normal form of system equations, initial conditions. Impulse response of a
physical system, introduction to convolution, system impulse response and convolution
integral, numerical convolution. Sampling theorem, Z-transform, convergence of Z-transform,
properties of Z-transform, inversion of Z-transform , evaluation of system frequency
response, applications of Z-transform.
3. Representation of signals in terms of elementary signals, condition for orthogonality,
representation of signals by elementary sinusoids, Fourier series representation, power
spectrum, Fourier Transform, system function, energy spectrum. Calculation of simple
transforms, Discrete Fourier Transform (DFT), properties of Discrete Fourier Transform.
4. Statistical Signal Analysis: Classification of random signals, auto correlation function,
properties of auto correlation function, measurement of auto correlation function, application
of autocorrelation functions, cross correlation functions, properties of cross correlation
functions, sum of random processes. Spectral density, relation of spectral density to
autocorrelation function. Auto correlation function of system output, cross- correlation
between input and output, white noise, generation of pseudo-random binary noise, analysis of
linear systems in time domain using white noise, mean and mean square value of system
output, analysis in the frequency domain.

Reference Books:
S. N.
1.

Author
Gabel R.A. and

Name of Book
Signals and Linear Systems

Publisher
John Wiley and Sons, New York

2.
3.
4.
5.

Robert R.A
Oppenheim, Wilsky
and Nawab

Signals and Systems

C.T.Chen

Systems and Signal Analysis

Cooper G.R and

McGillem C.D
Ziemer R.E.,
Tranter W.H., and
Fannin D.R.

Probabilistic Methods of Signals

and System Analysis
Signals and Systems

EE-1207

Prentice Hall, New Delhi

Oxford University Press, New
Delhi
Oxford University Press,
Cambridge
Pearson Education Asia,
Singapore

ELECTRICAL MACHINES-I
Fourth Semester

L T P C
3

1 0 8

Electrical Engineering Branch

Part-I (15 Lectures, 30 Marks)
1. Constructional features: Magnetic circuit: Different types of field and armature structures,
their placement and magnetic path with special reference to transformer. Material used:
laminations magnetic saturation. Arrangements in Transformer, DCM, SM, IM, LIM.
2. Electric circuit: Different types of field and armature windings, pole formation, and winding
parameters (full pitch & short pitch) concentrated winding and distributed winding, single
layer and double layer winding). Brush slip ring & commutator arrangement. Arrangements in
Tr., DCM, IM, LIM, SM.
3.
4.
5.
6.

Insulation system: material used, class of insulation.

Cooling circuit: Cooling arrangement, medium used for coding.
Supporting structure.
Magneto-motive force: Nature of MMF developed by concentrated winding carrying DC
and AC, their Fourier series components, Nature of mmf due to distributed winding, harmonic
reduction, Flux density distribution as a function of path reluctance, main flux and leakage
flux, Equation for the instantaneous value of flux linked by a concentrated coil, Nature of
MMF produced in Tr., DC, IM, LIM.
7. Electromotive Force: Expressions of induced emfs developed across a concentrated coil due
to relative motion between flux and coil, due to flux pulsation and that due to both relative
motion and flux pulsation. The rotation of a concentrated coil in different types of flux
density. Special reference to arm reaction emf and leakage reactance emf. Modified
expression for emf developed across distributed wing. Nature of the emf developed across the
coil in Tr. DC m/c, induction m/c and synchronous m/c. Lump parameter equivalent circuit
models for DC m/c, IM and SM, Tr. (Sign conversion). Field energy and derivation of
generalized torque equation (sign conversion). Energy flow and efficiency, rating and name
plate data.

Part-II: (25 Lectures, 70 Marks)

1. DC Generators: Classification on methods of excitation, armature reaction, interpoles and

compensating winding, commutation, load ch. of DC generators, regulation, parallel
operation.
2. DC Motors: Torque equation, characteristic curves of shunt, series and compound motors,
starting starter and grading of starting resistance, speed control armature voltage control and
field control methods. Ward Leonard method, choice of motors for different duties, losses and
efficiency, testing- Swinburns test, back to back test, retardation test and brake test.
3. Transformer: Emf equation., relation between voltage per turn and KVA output, phasor
diagram based on approx. and exact equivalent circuit, per unit equivalent resistance
reactance, open circuit and short circuit tests, back to back test, regulation, losses and
efficiency, max. efficiency, All day efficiency, wall cooling. Two winding and three winding
transformers, auto transformer, phase transformer and connections, parallel operation.
4. Polyphase Induction Motor: Operation of polyphase induction motors, effect of slots on
performance of the motor, equivalent circuit and phasor diagram, locus diagrams, torque and
power, speed torque curve effect of rotor resistance, deep bar and double cage rotors,
performance calculation from circle diagram, methods of speed control, testing, losses and
efficiency, application, induction generators and induction regulator.
5. Linear Induction Motors: Introduction, operating principles and application areas.

Reference Books:
S. N.
1.

Author
Dr. S.K. Sen

Name of Book
Electrical Machines

Publisher
Khanna Publishers

2.

P.S. Bimbhra

Electrical Machines

Khanna Publishers

3.

Nagrath & Kothari.

Electrical Machines

TMH

EE 1208

DIGITAL ELECTRONICS

L T P C

4th Semester

3 0 0 6

Electrical Engineering Branch

1. Logic Families and Logic Gates: TTL, ECL, NMOS, CMOS and PTL logic families and
realization of basic logic gates-AND, OR, NOT, NAND, NOR, XOR, XNOR. Transfer
characteristics, Inverter ratios, Noise margin, power consumption, propagation delays, fan-in
and fan-out.
2. Number Systems and Codes: Signed and unsigned numbers and their arithmetic operation,
Binary, Hexadecimal, Octal numbers and their conversions. BCD, Excess-3, Gray, 3 out of 5
and Alpha-numeric codes.
3. Sequential Logic Circuits: Latches and Flip-flops: RS, JK, D-type Flip-flops, Master-slave
flip-flops, Edge triggered FF. Shift Registers- serial and parallel and mixed modes, CountersBinary, Ripple, Synchronous, asynchronous, Mod-K and decade counters and their design.
4. Combinational Logics: Multiplexers, Demultiplexers, Encoder, Decoder, Priority Encoder,
parity checkers, half-adders and Full adders. Two-level and Multi-level logics, single and
Multi-output functions, logic minimization, K-Map and Queen-Mclauskis Method,
5. Semiconductor Memories: ROM, PROM, EPROM, Static and Dynamic RAM, MOS
memories, Flash Memory, Memory addressing.

6. Introduction to ADCs: flash ADC, dual slope ADC, successive approximation ADC, DAC,
R-2R ladder network, weighted resistance DAC, Weighted capacitance DAC.
Reference Books:
S. N.
1.

Author
Malvino and Leech

Name of Book
Digital Principles and Application

2.

M .M. Mano

Digital logic and Computer Design

3.

Alan Markovitz

Introduction to Logic Design

4.

R.P. Jain

Modern Digital Electronics

5.

J.M. Rabaey

6.

Zvi Kohavi

EE 1213

Digital Integrated Circuits: A Design

Perspective
Switching and Finite Automata
Theory

Publisher
McGraw-Hill
3rd Edition, Prentice
Hall
McGraw-Hill
4th Edition, TataMcGraw Hill
2nd Edition, Prentice
Hall
Tata-McGraw Hill

Analog & Digital Electronics Lab

L T P C

4th Semester

0 0 2 2

Electrical Engineering Branch

List of Experiments:
1.
2.
3.
4.
5.
6.
7.

Study of PIN diagram of ICs and to test the logic gates and verify their truth tables
Implementation of half adders, full adders using NAND gates only
Implementation of Boolean functions of three or four variables using 74153 (4:1) Multiplexer
Addition of two binary numbers using IC 7483
To compare two 4-bit binary numbers using magnitude comparator 7485
To study the different modes of operation of shift registers using 7495
Designing an asynchronous counter of any modulus using JK FF 7473

8. Design of a synchronous counter of any arbitrary count using IC 7473.

9.
10.
11.
12.

Different applications of OpAmps Adder, Subtractor, Differentiator, Integrator etc.

Schmitts Trigger Circuit
Phase Shift Oscillator Circuits
Active Filters Design with IC 741

EE 1214

Software Engineering Lab

L T P C

4th Semester

0 0 2 2

Electrical Engineering Branch

Verification of Network Theorems using software like MULTISIM, PSIM etc. Solution of linear
system algebraic equations using MATLAB or C. Solving numerical solutions of differential
equations using MATLAB or C. Simulation of rectifier circuit using normal p-n junction diode using

MULTISIM, PSPICE or PSIM software. Simulation of behavior of DC machines using PSIM

software.
Reference
S. N.

Author

Name of Book

Publisher

1.

C.L Wadhwa

Basic Electrical Engineering

New Age International

2.

P.S. Bimbhra,

Electrical Machines

Khanna Publishers

3.

Hughes

Electrical & Electronic Technology

Pearson

Software.

MATLAB, PSIM,
MULTISIM

4.

-x-x-x-x-x-

EE-1301

ELECTRICAL MACHINES -II

L T P C

Fifth Semester

3 1 0 8

Electrical Engineering Branch

1. Synchronous Machines: General principles, Types of SM and steady state model.
Determination parameter. Short circuit ratio, nature of MMF in non-salient-pole m/c and nonsalient pole SM, determination of regulation and different characteristics.
2. Introduction to two-reaction theory, slip test, regulation of salient pole m/c, Damper winding
& oscillation of synchronous machine, synchronizing power, Determination of transient &
sub-transient reactance & time constants of synchronous machine, Determination of sequence
impedance, parallel operation.
3. Synchronous motors: Phasor diagram, effect of excitation variation, V-curve, O-curve,
power-angle diagram & stability, hunting. Two reaction theory, Methods of starting,
Application as phase modifier.
4. Solid state slip power recovery schemes for induction motor.
5. Single phase commutator motors: Series, repulsion & universal motors construction,
principle of operation starting methods, speed control, power factor, commutation, methods of
compensation, Comparison of d.c. & a.c. series motors.
6. Single phase Induction Motors: Construction, and analysis, starting & running
characteristics, starting methods.
7. Stepper Motor: Constructional features, Torque-stepping rate characteristic, Application
area.

Reference Books:
S.N.
1.

Author
Electrical Machines

Name of Book
Dr, S.K. Sen,

Publisher
Khanna Publishers

2.

Generalized Theory of Electrical Machines

P.S. Bimbhra,

Khanna Publishers

3.

Electrical Machines

Nagrath & Kothari,

TMH

4.

Theory of A.C. Machines

A.S. Langsdorf.

McGraw Hill

EE 1302

CONTROL SYSTEM - I

L T P C

Fifth Semester

3 1 0 8

Electrical Engineering Branch

1. Motivation: What is control all about, the control problem and solution possibilities, the
notion objectives/specifications, feedback as natural strategy, regulation and tracking
problems
2.

Models and physical systems: Transfer function: Definition, Examples with mechanical,

electrical, hydraulic, pneumatic systems and systems with dead zone; Description of
control system components and their representation and transfer functions: Error
detectors, Gears, Gyroscope, DC motors, Servomotors, Techo-generators, Servo
amplifiers; Block diagram and reduction techniques, Signal flow graphs, Masons Gain
formulae.
3. Time domain analysis: Transient response analysis (1st and 2nd order ): response
parameters and their qualitative analysis; Steady state response analysis (1 st and 2nd
order): response parameters and their qualitative analysis; Transient and steady state
response analysis for 1st and 2nd order systems with unity negative feedback structure;
Impact of close looping on system parameters and their sensitivity, Error analysis and
error constants;
4. Root locus analysis: Development of root loci, Root motions under close looping, Pole/zero
effects on loci, Effect of rate and reset times, Stability, relative stability and time domain
specification using root locus.
5. Frequency domain analysis: Routh array analysis; Bode plots, Nichols plot, polar plots,
Nyquist plot; Stability, relative stability and frequency domain specifications analysis using these
plots; Multiple point of view using Bode, Nichols, Polar and Nyquist plots simultaneously; M and
N circles.
6. Controller/ Compensator Design: Time domain specifications; Frequency domain
specifications; Interrelation between TDS and FDS; How to choose a strategy to satisfy a given
objective; P, PD, PI, PID error control strategies; Impact on transient response, Impact on S.S.
response;
7. Compensator design: Lead, lag and lag lead compensation, Objectives in Time parameters,
Objective in frequency parameters, the role of gains, the role of phase.

Reference Books:
S. N.

Author

1.

D Azzo and Houpis

2.
3.
4.
5.
6.

Katsuhiko Ogata
M. Gopal
N S Nise
Dorf and Bishop
Anadanatarajan &

Name of Book
Linear Control Systems Analysis and
Design
Modern Control Engineering
Control Systems Principles and Design
Control Systems Engineering
Modern Control Systems
Control Systems Engineering

Publisher
McGrow Hill
Pearson Education
Tata McGrow Hill
Wiley
Addison Wesley
Scitech Publications

Ramesh Babu

EE-1303

(India) Pvt Ltd, Chennai

Power System-II
Fifth Semester

L T P C
3

0 0 6

Electrical Engineering Branch

1. Performance of overhead transmission lines: Introduction; classification of transmission
lines; performance calculation of short and medium transmission lines, Nominal T and
nominal methods; Performance Long transmission lines; Power circle diagrams (PCD):
Receiving end, sending end, universal PCD, calculation of SPM Capacity, maximum power
limit, percentage regulation, sending end power factor, efficiency of transmission line from
PCD. Loss and loss diagram.
2. Power system stability: Introduction to synchronous machine, rotor angle, Infinite bus;
Definition of stability, classification of stability, power limit of transmission lines, steady state
stability, clarke's diagram, transient stability, the swing equations, equal area criterion,
calculation of critical clearing angles, Calculation of power angle curves for fault and post
fault conditions for various types of faults, step by step procedure for solution of swing
equation, dynamic stability, factors effecting stability
3. Control of active and reactive power: Active power and frequency control: fundamental
speed governing system, Governor speed regulation parameter, , Fundamentals of automatic
generation control, Frequency bias, Primary and secondary control, Basic simulation models
of automatic generation control; Reactive power and voltage control: Production of absorber
of reactive power, methods of voltage control; shunt reactors, series reactors, synchronous
condensers, static VAR system, tap changing transformers.
4. Economic operation of steam Power plant: Introduction; Methods of loading turbo generators, Thermal plant cost modelling, Input - output curves, incremental cost, cost curve:
Linear and quadratic, method of Lagrangion multiplier, Equality constraints and inequality
constraints, transmission loss, optimum generator allocation with and without transmission
loss; Penalty factors, iterative procedure to solve co-ordination equation.
5. Elements of Hydrothermal co-ordination: Advantages of combined operation, plant
requirement for base load and peak load operation, Combined working of runoff river plant
and steam plant, Reservoir hydro plants and thermal, plant for long term operational aspects,
co-ordination equation, scheduling methods, application of scheduling methods.
6. Transients in power systems: Lightning phenomenon, Switching surges, travelling waves,
shape and specifications of travelling waves, attenuation and distortions of travelling waves,
alteration due to corona, behaviour of travelling waves at open, short and joints of overhead
lines and cables, construction of lattice diagrams.
Reference:
S. N.
1.
2.
3.
4.
5.
6.

Author
C.L. Wadhwa
Ashfaq Hussain
B.R.Gupta
Soni, Gupta, Bhatnagar
J.B.Gupta
P.Kundur

Name of Book
Electrical Power systems
Electrical Power System
Generation of Electrical Energy
Electric Power
A course in Power Systems
Power system stability and control

Publisher
Wiley Eastern
CBS Publishers
S. Chand
Dhanpat Rai & Sons
S.K.KATIA & SONS
McGraw-Hill

7.

O.I.Elgerd

EE 1304

Tata Mcgraw Hilll

Microprocessor and Microcontroller

L T P C

5th Semester

3 0 0 6

Electrical Engineering Branch

1. Introduction: Important features, Educational need, Applications.
2. Microprocessor architecture: Arithmetic Logic Unit (ALU), Timing and control Unit,
Registers, Data and Address bus, Interface unit, Intel 8085 instructions, Instruction word size:
one byte, two byte and three byte instructions, Timing and control signals, Fetch operations,
Execution operations, Machine cycle and state, Instruction and data flow, System timing
diagram.
3. Programming microprocessors: Data representation, Instruction formats, Addressing
modes, Instruction set, Assembly language programming, Program looping, Subroutine
linkage.
4. Memory interfacing: Types of main memories, Compatibility between memory and system
BUS, Address space, Partitioning of address space, Special chips for address decoding, ROM
and RAM interfacing.
5. Data transfer techniques and their implementation: Programmed data transfer, DMA
mode of transfer, I/O port, Device polling in interrupt driven mode of data transfer, DMA
controller and data transfer in DMA mode, Serial mode of data transfer, Introduction to
Standard interface chips: 8255, 8259, 8253, 8279.
6. Microcontrollers
7. Common peripherals and their interfacing: Keyboard, LEDs, Common display and
keyboard scanning.
8. Important features of some advanced microprocessor: bit microprocessor families:
MOTOROLA 68000: The CPU components, Instruction sets, addressing modes etc, Intel
8086/8088: The CPU components, Instruction sets, addressing modes etc; 32 bit
microprocessor families: MOTOROLA 68020, Intel 80386, 486, PENTIUM PRO; RISC
microprocessors, SUN SPARC, HP precision architecture.
9. Applications of Microprocessors: Temperature monitoring and control System, Speed
controller of a DC Motor, Data acquisition system.

Reference Books:
S. N.
1.

Author
John P. Hayes,

Name of Book
Digital Systems and Microprocessors

Publisher
McGraw-Hill I.E.

2.

R.S.Gaonker

Microprocessor Architecture, Programming and

Applications

Wiley Eastern.

3.

D.V.Hall,

Microprocessor and Interfacing: Programming

and Hardware

McGraw-Hill I.E

4.

John P. Hayes,

Digital Systems and Microprocessors

McGraw-Hill I.E.

EE 1311

EM Laboratory-I

L T P C

5th Semester

0 0 2 2

Electrical Engineering Branch

List of experiments
1.
2.
3.
4.
5.
6.
7.
8.

Ratio and polarity test of single phase transformer

Parallel operation and load test of single phase transformer
Open circuit characteristics of DC Shunt generator
Load test of DC Shunt generator
Load test of compound generator
Speed control of DC shunt motor
Speed control of DC series motor
Swinburne test of DC machine.

EE 1312

Control System Laboratory

5th Semester

Electrical Engineering Branch

1. Use of different Toolboxes in MATLAB for simulating transfer functions, closed-loop systems
etc. of separately/self excited DC generators/motors); MATLAB, [transpose, inverse of given
matrix.
2. Plot the pole-zero configuration, step response for different values of k, to discuss stability. Plot
bode plot, Nyquist plot of given transfer function and gain and phase margins
3. Design of compensators, controllers.
4. To examine the open loop and closed loop frequency response and the effect of addition of poles
and zeros
5. Design of observer for plants in observer canonical form using pole placement.
6. Use of LabView.
7. Real time data acquisition and control of processes using ELVIS-II+
8. To study P, PI and PID controller with type 0 and type 1 system with delay.
9. To study Open loop response like (i) Error detector with gain, (ii) Time constant, (iii) Integrator
10. Experiment on relay control system
11. Experiment on AC position control, synchro transmitter/receiver, compensation design, DC Speed
control design, DC position control system, potentiometric error detector, Control Engineering
Trainer, Modular Servo system, Process Trainer
12. Study of analog electronic PID controller
13. To study Close loop system (I) First order system (II) Second order system (III) Third order
system

14. Experiment on relay control system, AC position control, synchro transmitter/receiver,

compensation design, DC Speed control design, DC position control system, potentiometric error
detector
15. Use of Control Engineering Trainer
16. Use of Modular Servo system
17. Use of Process Trainer

EE 1313

Microprocessor and Microcontroller Laboratory

L T P C

5th semester

0 0 2 2

Electrical Engineering Branch

1. Write a Program to add two hexadecimal numbers.
2. Write a Program to subtract two hexadecimal numbers.
3. Write a Program to find the product of two hexadecimal numbers each of length 4 bits.
4. Write a Program to perform division of two hexadecimal numbers.
5. Write a Program to arrange a list of unsigned integers in ascending order.
6. Write a Program to arrange a list of unsigned integers in descending orders.
7. Write a Program to design a digital clock using only a single microcomputer.
8. Write a Program to design a digital clock using only a single microcomputer.
9. Write a Program to design and implementation of design clock in hardware using 8085 and its
peripherals.
10. Write a Program to driving of Stepper Motor using 8085.
EE 1305

CONTROL SYSTEM-II

L T P C

Sixth Semester

3 1 0 8

Electrical Engineering Branch

1. Introduction to Digital Control: Z Transform, Signal processing in digital control,
Principles of signal conversion, Transfer function models for discrete time systems, System
response, Stability in the z plane and the jury stability criterion, Sampling and data
reconstruction process, Z domain description of closed loop systems, Systems with dead
time, Implementation of digital controllers; Digital Controllers for deadbeat performance.
2. State Space Representation of Continuous Time and Discrete time systems: Introduction
to state space model, State Space equations in Canonical forms, Modeling of few electrical
and mechanical systems in State Space form, Solution of time invariant, time variant
continuous time systems & discrete time system state equations, Concept of state transition
matrix, Controllability and Observability, Relation between transfer function and state
variable representations, Pole-placement using state variable feedback, Design of full order
state observers, reduced order observer, observer based state feedback controller.
3. Introduction to nonlinear feedback control systems: Characteristics of Nonlinear systems,
Linearization technique; Phase Plane analysis, Singular points, Limit cycle vs closed
trajectory, Stability analysis using Phase Plane analysis; Describing function of common

nonlinear functions, stability analysis using DF; Stability in the sense of Liapunov,
Liapunovs stability theorems for linear and nonlinear systems; Effect of Non-linearity in
Root Locus and Nyquist Plot.

Reference Books:
S. N.

5.

Author

Name of Book

1.

Dorf and Bishop

Modern Control Systems

2.

Ogata

Modern Control Engineering

3.

B.C.Kuo

Digital Control System

4.

M. Gopal

Modern Control System theory

Donald M Wiberg

State Space and Linear Systems

Publisher
PHI
PHI
PHI
PHI
Schuams Outline
Series

-x-x-x-x-x-

EE-1306

POWER ELECTRONICS
Sixth Semester

L T P C
3

1 0 8

Electrical Engineering Branch

1. Introduction: Concept of Power Electronics, Different types of power electronics devices,
converter systems, areas of application, recent developments
2. Device characteristics, protection and operation: Terminal characteristics of major power
electronics devices, ratings, protection, heating, cooling and mounting, series and parallel
operation, firing circuits
3. Phase controlled rectifiers: Principles of operation of phase controlled, single phase & polyphase, full-wave & half-wave converters with continuous and discontinuous load currents and
harmonic analysis. Effect of source impedance on the performance of converters, dual
converters
4. Choppers: Principle of chopper operation, Control strategies, Types of chopper circuits and
steady state analysis. Commutation in chopper circuits, Multiphase chopper.
5. Inverters: Classification of inverters, Single-phase and three-phase Voltage source Inverters,
Methods of controlling output voltage, frequency and phase, Reduction of harmonics in the
inverter output voltage, Current source inverters and operations.
6. AC Voltage Controller: Types of AC voltage controllers, Single phase voltage controllers,
Sequence control of ac voltage controllers, 3-phase AC voltage controller operation
7. Cycloconverters: Principles of cycloconverter operation, Methods of controlling output
voltage and frequency in cases of: Single phase to single phase, three phase to single phase,
three phase to three phase operation.
8. Applications: Power supply applications, few applications in residential and industrial
systems, Electric utility.

Reference Books:
S. N.
1.
2.
3.
4.
5.
6.

P C Sen

Author

Name of Book
Power Electronics

Dubey

Power Electronics

Dubey et. al.

Thyristorised Power Controllers

Rashid Mohammed

Power Electronics

V. Subrahmanyam

Power Electronics & Drives

P.S.Bhimbhra

Power Electronics

EE 1207

Publisher
TMH
TMH

PHI
New Age
Khanna Publishers

SWITCHGEAR AND INDUSTRIAL PROTECTION

L T P C

6th Semester

3 0 0 6

Electrical Engineering Branch

1. Symmetrical Fault Analysis: Causes of faults, types of faults, importance of fault analysis in
electrical power systems, fault analysis for generators, transmission lines, concepts of
generator reactances; transient, sub-transients etc, current limiting reactors, types, functions.
2. Symmetrical components and Unsymmetrical Fault Analysis: Concepts of symmetrical
components, fortescues theorem, power in terms of symmetrical components, sequence
impedances and sequence networks for generators, transformers, transmission lines etc,
unsymmetrical fault (L-G, L-L, LL-G) analysis.
3. Neutral Grounding: Fundamentals of neutral grounding, ungrounded system analysis, arcing
ground, solid grounding, types of grounding, resistance, reactance and resonant grounding,
generator neutral breaker, grounding practice.
4. Circuit Breakers: Function, importance, arc phenomenon, arc interruption theories, CB types
and description, Circuit breaking transients, restriking and recovery voltages, CB ratings,
testing of CBs.
5. Protective Relays: Operating principle, classification, Electromagnetic type relays theories
for torque generation, concepts of protective zones, Over Current relay characteristics,
Directional relay torque generation, feeder protection, time grading & current grading,
Distance protection philosophies, Distance relays and their characteristics, differential
protections, Protection of Transmission lines, generator and transformers, Transley relay,
negative sequence relay, Fuses.
6. Sub-Stations: Function of sub-station, necessity, types and arrangement of sub-station
equipments, single line diagram with different busbar arrangement including reactors, bus-tie
breakers, substation grounding, surge protection,
7. Lightning Arrester: Function, types, working principles and surge absorbers.
References

S. N.

Author

Name of Book

1.

C. L. Wadhwa

Electric Power systems

2.

Willium D. Stevenson Jr.

Elements of Power System Analysis

John Wiley & Sons

3.

D P Kothari, I J Nagrath

Modern Power System Analysis

TMH Publishing Co.

4.

J B Gupta

Switchgear and Protection

S.K. Kataria & Sons

5.

Sunil S Rao

Switchgear and Protection

Khanna Publisher

6.

B. Ravindranath and M.
Chander

Power System Protection and

Switchgear

Wiley Publisher

7.

Ashfaq Hussain

Power Systems

CBS Publishers

EE 1308

Publisher
New Age
International

Programming and Data Structure

L T P C

Sixth Semester

3 0 0 6

Electrical Engineering Branch

1. Introduction to Programming: variables, assignments; expressions; input/output;
conditionals and branching; iteration; functions; introduction to pointers;
2. Linear Data Structures: Sequential representations - Arrays and Lists, Stacks, Queues and
Dequeues, strings, Application. Linear Data Structures - Link Representation - Linear linked
lists, Circularly linked lists. Doubly linked lists, application.
3. Recursion: Design of recursive algorithms, Tail Recursion, When not to use recursion,
Removal of recursion.
4. Non-linear Data Structure : Trees - Binary Trees, Traversals and Threads, Binary Search
Trees, Insertion and Deletion algorithms, Height-balanced and weight-balanced trees, B-trees,
B+ -trees, Application of trees; Graphs - Representations, Breadth-first and Depth-first
Search.
5. Hashing - Hashing Functions, collision Resolution Techniques.
6. Sorting and Searching Algorithms - Bubble sort, Selection Sort, Insertion Sort, Quicksort,
Merge Sort, Heapsort and Radix Sort.
7. File Structures: Sequential and Direct Access. Relative Files, Indexed Files - B+ tree as
index. Multi-indexed Files, Inverted Files, Hashed Files.
Reference Books:
S. N.
1.
2.

Author
O.G.Kadke and
U.A.Deshpandey
Aho Alfred V., Hopperoft
John E., UIlman Jeffrey D.

Name of Book

Publisher

Data Structures and Algorithms

ISTE/EXCEL

Data Structures and Algorithms

PearsonEducation

3.

Ajoy Agarwal

Data Structures

C.Cybertech.

4.

Lipschutz

Data Structures

TMH

5.

Heileman

Data structures, Algorithims & OOP

Tata McGraw Hill

6.

M.Radhakrishnan and
V.Srinivasan

Data Structures Using C,

ISTE/EXCEL
BOOKS

7.

Weiss Mark Allen

Algorithms, Data Structures and

Problem Solving with C++,

Pearson Education.

8.

Horowitz Ellis & Sartaj

Sahni

Fundamentals of Data Structures

Galgotria Pub.

9.

Tanenbaum A. S.

Data Structures using C

Pearson Education

EE 1309

Instrumentation

L T P C

6th semester

3 0 0 6

Electrical Engineering Branch

1. Introduction: Generalized performance & functional description of an Instrumentation
system, Role of Transducers, Amplifiers, Filters, Display devices etc. Review of idea on
DA/ADC, filters & signal conditioners, OP-AMPS, Instrumentation amplifiers & its circuits.
2. Analytical Instrumentation: Measurement of pressure, Measurement of flow (EM flow
meter), Measurement of temperature, Measurement of liquid level etc.
3. Transducers & sensors: Introduction, definition, classification & selection of transducers/
sensors; Resistive, capacitive, inductive (LVDT), piezoelectric transducers & their
applications; Thermistors: measurement of temperature; Magnetostrictive, Hall Effect,
electromagnetic transducers; photoelectric transducers.
4. Nondestructive testing equipments: Introduction, Magnetic particles, Dye penetrants, X
rays, Gamma rays; Eddy current testing; Ultrasonic- principle of working. Pulse echo method
of flaw detection.
5. Data transmission & telemetry: Definition, classification, basic telemetering system.
a)Voltage, current & frequency telemetering systems.
b)

Multiplexing & modulation in telemetry

c)PLCC
d)

Transmitters-techniques & inter stage coupling. Receivers- techniques.

6. Fiber optical instrumentation:

a)

Introduction, principle of working

b)

Optical fiber cable, Dispersion & losses

c)

Connectors& splices, sources & detectors.

d)

Transmitters & receiver circuits.

e)

Applications

7. Related topics:
(a)

Digital data acquisition systems

(b)

Smart sensors Introduction, Principle of working, information coding, data

communication & automation.

(c)

Intelligent Instrumentation- definition, practical examples.

(d)

Remote control: Introduction, general descriptions, typical scheme of an industrial

remote control system.

(e)

Internet based tele-metering.

Reference Books:
S. N.
1.
2.
3.
4.

Author
D. Patranabis

Name of Book
Principles of Industrial Instrumentation

Publisher
Tata Mc Graw Hill

D. Patranabis

Sensors & Transducers

PHI

Rangan, Sharma & Mani

Instrumentation, Devices & system

Tata Mc Graw Hill

D.V.S Murthy

Transducers & Instrumentation

PHI

EE 1314

EM Laboratory-II

L T P C

6th Semester

0 0 2 2

Electrical Engineering Branch

1.
2.
3.
4.
5.
6.
7.
8.
9.

Speed control of DC Series motor.

No load and block rotor operation of 1-phase Induction motor.
Open ckt and S.C characteristics of 3-phase alternator.
Determination of Xd and Xq of a three phase alternator by slip test.
V-Curve of Synchronous motor.
Three phase to six phase connection.
Load characteristics of D.C. Series motor.
Load characteristics of D.C. compound generator
Parallel operation of 3-phase alternator

EE 1315

Process Control and Instrumentation Laboratory

L T P C

6th Semester

0 0 2 2

Electrical Engineering Branch

List of experiments in the Process Control Laboratory
1. Use of Technology Tutor:
a. Wheatstone bridge: measurement of resistance, conditions for the greatest sensitivity,
operation with alternating current source. Operation with amplifier, transducer.
b. Characteristics of various types of transducers, their calibration.
c. Assembling a complete measuring system and derive a voltage/position calibration curve for.
d. To design, setup a continuous control system and observe its dynamic characteristics.

2. Use of various sensors (temperature, level, liquid flow, air flow, pressure Gauge) in loops
comprising PID controller, PLC & DCS and their modeling.
3. Real time measurement and control of simple systems using LabView
4. Study of sensors characteristics using LabView
5. Control with PCs of the above five (Sl-2) process loops in LabView platform
6. Measurement of flow, level using different sensors for different pipe diameters and liquid
temperatures
7. Comparative study of temperature measurement using: RTD and Thermistor, RTD and
Thermocouple.
8. Simulation and control of process control plants.
9. Use of PLC (in design, reversing contact, conveyor belt, street light & garage door automation,
etc)

EE 1316

Power System Laboratory

6th Semester

Electrical Engineering Branch

1. Generator Control and Synchronizing Circuits: Automatic Synchronization in test mode,
Synchronization to the actual mains power supply network, Study the response of the
programmable controller to incorrect programming; Automatic power factor control:
Synchronizing the generator to the mains power supply network, Closed-loop cos-phi control of a
synchronous generator, Closed-loop cos (phi) control of mains power supply network; Automatic
power control: Synchronizing the generator to the mains power supply network, Sensitivity and
direction of action of the power controller.
2. Generator Protection: Time over current protection, Unbalanced load protection; Reverse power
protection Overvoltage and under voltage protection; Stator-earth fault protection; Generator
differential protection.
3. Transformer: Multiphase transformer (MPT) operating at no-load and short-circuit; MPT with
ohmic, inductive and capacitive load; Parallel operation of MPTs, Current distribution for
different vector groups, Determining zero impedance, Investigating the transformation ratio.
4. Transformer Protection: Transformer differential protection; Time over current protection;
5. Transmission line (Power transmission): Investigations on Three-phase Transmission Lines;
Parallel and series connection of transmission lines; Transmission Line with Earth-fault
Compensation; Transmission Systems with a Synchronous Generator.
6. Transmission line Protection: Over current time protection for lines, Directional over current
time protection for lines, Overvoltage and under voltage protection, Directional power protection;
Earth-fault voltage protection; Protection of Parallel-connected Lines, High-speed distance
protection.
7. Electric power distribution (Three-phase double bus bar system): Electric power distribution
(Three-phase double busbar system) - Basic circuits of a three-pole, double busbar system, Threephase, double bus bar system with load, Busbar changeover without interruption of the branch,
Busbar coupling.

8. Over Current protection for busbar: Registration of currents in normal operating mode,
Registration of currents in the event of single-, double- or triple-pole short circuit, Faults outside
the protective domain.

EE 1401

Digital Signal Processing

LTPC

Seventh Semester

30 0 6

Electrical Engineering
1. Discrete-Time Signals & Systems: Advantages of digital over analog signal processing,
discrete-time signals and sequences, representation of sequences and elementary operations,
classification of discrete-time systems. Resolution of discrete-time signals into impulses,
analysis of discrete-time LTI systems. Response to arbitrary inputs, the convolution sum,
properties of LTI systems and their interconnections, causality, stability. Linear constant
coefficient difference equation and their solutions. Impulse response of LTI system, response
to complex exponential and sinusoidal signals, the frequency response function.
2. Transforms: Representation of sequences by Fourier transforms-symmetry properties and
theorems. The Z-transform, two-sided and one-sided z-transforms, ROC, properties of ztransform, Inverse z-transform, Analysis of LTI system in the Z-domain.
3. Sampling: Sampling of continuous time signals, periodic sampling, frequency-domain
representation of sampling.
4. Transform Analysis of LTI System: System functions-linear constant coefficient difference
equations, poles and zeros, rational system function, causality and stability, frequency
response of LTI systems, phase distortion and delay, frequency response for rational system
functions and for single pole or zero systems.
5. Structures for Discrete-time Systems: Block diagram representation of linear constant
coefficient difference equations and their interconnections. Direct form I, direct form II,
cascade form and parallel form structures, Finite precision word-length effect-number
representation, analysis of effect of coefficient quantization and rounding off of noise, zero
input limit cycles in fixed point realization of IIR digital filters.
6. Filter Design Techniques: Characteristics of practical frequency selective filters, design of
FIR filters by windowing. Characteristics of Butterworth & Chebyshev filters, design of IIR
filters from continuous time filters- impulse invariance and bilinear transformation methods.
7. Discrete Fourier Transforms: Frequency domain sampling, the DFT and properties of DFT,
circular convolution, linear convolution using DFT, Application of DFT for A.C. transient
analysis
8. Efficient Computation of DFT: Computational complexity, FFT algorithms- the decimationin-time and decimation-in-frequency; signal flow graph-Butterfly computations, in-place
computations, analysis of computational complexities.
9. Multi-rate signal processing and introduction to Wavelets.
10. VLSI implementation of digital filters and signal processing algorithms, implementation of
signal processing algorithms in general purpose processor, specialized DSP processors.
11. Applications of Signal Processing: Spectral analysis using DFT, musical sound and audio
processing, application of signal processing in power system, fault detection and
improving power quality, MATLAB programming.

Text Books:
S. N.

Author

Name of Book

Publisher

1.

Oppenhein and Schaffer

Discrete-time Signal Processing

PHI

2.

Proakis & Manolakis

Digital Signal Processing

PHI

3.

Chen C.T.

Digital Signal Processing: Spectral

Computation & Filter Design

4.

Sanjit K. Mitra

Digital Signal Processing

EE 1402

INDUSTRIAL DRIVES
Seventh Semester

Oxford Univ.
Press
TMH

L T P

Electrical Engineering Branch

Part I
1. Introduction: Concept of Electrical Drive, Advantages over other drives, Different parts,
Classification, choice of Electrical Drives, Status of dc and ac Drives.
2. Dynamics of Electrical Drives: Fundamental torque equation, Speed Torque conventions
and multi-quadrant operation, Nature and classification of load torques, Dynamics of motorload combination and equivalent drive system, steady state stability & transient stability of
electric Drive.
3. Selection of Motor Power Rating: Thermal model of motor for heating and cooling, loading
conditions and classes of motor duty, Determination of power rating of electric motors for
different applications, effect of load inertia, load equalization, environmental factors.
4. Starting: Effect of starting on power supply, motor and load, determination of acceleration
time, energy relations during starting, methods to reduce the energy loss during starting.
5. Electric Braking: Types of electric braking and advantages, braking of dc motors induction
motors during lowering of loads and while stopping, braking of synchronous motors, energy
relations during braking.
Part- II
6. Control of Electrical Drives: Modes of operation, speed control and drive classifications,
closed-loop control of drives: current-limit control, torque control, speed control, speed
control of multi-motor drives, Speed sensing, current sensing, phase-locked-loop (PLL)
control, closed-loop position control (Methods employed and description of different schemes
only).
7. Control of DC Drives: Speed control of dc separately excited motor using: (a) single-phase
and three-phase controlled rectifiers (b) Dual-converter and (c) Chopper, Steady state and
transient analysis
8. Control of Induction Motor Drives: Control of IM using variable frequency operation based
on VSI, CSI & Cycloconverter, Speed control of wound rotor Induction Motor by (a) Static
rotor resistance control (b) Static Scherbius drive (c) Static Kramer drive.
9. Industrial Applications: Drives for steel Mills, Paper Mills, and Textile Mills.

Reference books:
S. N.
1.
2.
3.

Author
S.K. Pillai

Name of Book
A first course on Electrical Drives

Publisher
Willey Eastern Ltd.

G.K. Dubey

Fundamentals of Electrical Drives

Narosa

V. Subrahmanyam

Electric Drives

New Age

EE 1411

POWER ELECTRONICS AND DRIVES LAB

T P

Seventh Semester

Electrical Engineering Branch

List of Experiments
1. To study of terminal characteristics of SCR, TRIAC, MOSFET, IGBT
2. To study the operational features of triggering circuits: resistance gate triggering circuit for
SCR; resistance-capacitance gate triggering circuit for SCR; UJT triggering circuit for SCR
3. To study the operation single-phase controlled rectifiers: half-wave controlled, fullycontrolled and half-controlled (semi-converter)
4. To study the functional controlled operation of class-A type voltage commutated DC chopper
5. To study the functional operation of single-phase AC voltage-controller (i) using anti-parallel
SCRs, (ii) TRIAC
6. To study the functional operation of single-phase Cycloconverter with R and RL load
7. 1-Ph Thyristor bridge based fully Controlled Converter Fed DC Motor Drive using Analog
Mode open/ closed loop speed controller
8. 3-Ph Thyristor bridge based fully Controlled Converter Fed DC Motor Drive using Analog
Mode open/ closed loop speed controller
9. 1-Ph IGBT based Four Quadrant Chopper Fed PMDC Motor Drive using Analog Mode open/
closed loop speed controller
10. To study the open/closed loop V/F control of 3-Ph, Induction Motor using 3-Ph IGBT based
Inverter and TMS320LF2407A DSP controller

EE 1403

ANALOG & DIGITAL COMMUNICATIONS

Eighth Semester

L T P

Electrical Engineering Branch

1. Introduction: The history of evolution of Electrical Communication, Concept of information,
messages and signals, Knowledge of Signals and Information representation, Elements of a

2.

3.

4.

5.

6.

7.

communication system, Communication channels, Base band and pass band signals,
Fundamental limitations.
Representation of signals and systems: Fourier transform, Properties of the Fourier
transform, Parseval's theorem, Rayleigs energy theorem, Dirac-Delta function, Fourier
transform of Periodic linear systems. Representation of energy and power signals and their
spectral density; External noise, internal noise, Noise calculations, signal to noise ratio.
Continuous Wave modulation: Amplitude modulation and spectra, DSB Signals and
spectra, Tone modulation and phasor analysis, Switching modulator, Envelope detector, Ring
modulator and balanced modulator, Single side band modulation, Phase Shift method for
generation of SSB, Phase and frequency modulation, Narrowband F.M, Wideband F.M,
Transmission B.W. of F.M. signal, Generation of F.M. signal. Indirect F.M. & Direct F.M,
Demodulation of F.M. signal using balanced frequency discrimination. AM transmitters and
receivers, super heterodyne receiver, IF amplifiers, AGC circuits.
Random Variables and Stochastic Process: Concept of random variables, Probability
density function and probability distribution function of random variable, Mean & Mean
square value of a R.V, Concept of Stochastic Process, Ensemble averages and correlation
function, Stationary and Ergodic Process, Signal Power, Time average and Power spectral
density, Shot noise, Thermal noise and White noise.
Sampling and Pulse modulation: Sampling Process, Sampling Theorem (only statement),
Analogy Pulse modulation : PAM, PPM and PDM, Time Division Multiplexing, Quantization
Process (only uniform quantization), Quantization noise, Pulse code modulation, Delta
modulation, Differential Pulse Code modulation.
Digital Communication: Base band Pulse Transmission concept., Method filter, Pass band
transmission model, Gram Schmidt Orthogonalization principle, Geometrical interpretation of
signal, Digital modulation techniques, Coherent binary PSK, Coherent binary FSK, Coherent
quadriphase shift keying.
Introduction to Information Theory: Uncertainty, Information and Entropy, Properties of
Entropy, Source coding theorem. Measure of information, Entropy & Information rate,
channel capacity, Hartley Shannon law, Huffman coding, Shannon Fano coding.

Reference Books:
S. N.
1.
2.
3.
4.
5.
6.

Author
Bruce Carlson

Name of Book
Communication Systems

Publisher
McGraw Hill I.E.

Taub and Schilling

Principles of Communication Systems

McGraw Hill I.E.

Simon Hymins

Communication Systems

PHI

BP Lathi

Modern Digital and Analog

Communication Systems

Oxford university Press

Couch

Digital and Analog Communication

Pearson Education India

John Proakis

Digital Communications

McGraw Hill

EE 1421

HIGH VOLTAGE AC/DC

L T P C

Departmental Elective II

3 1 0 8

Electrical Engineering Branch

1. Breakdown mechanism of gases, Liquid and solid materials: Properties of Gas as an
insulating medium and their breakdown, Townsends current growth equation and criterion
for breakdown, Electronegative gases-their properties and breakdown, Streamer theory of
breakdown in gases, Paschens law, Conduction and breakdown of liquid dielectric, Pure &
commercial liquids - origin, purification and breakdown, Transformer oil - composition,
purification, testing and breakdown, Different types of breakdown in solid dielectric,
Breakdown in composite dielectric, Measurement of intrinsic strength, partial discharge,
Different types of solid dielectric - use, property and breakdown.
2. Electrical properties of high vacuum: High vacuum as a dielectric, Pre-breakdown
condition, Factors effecting the breakdown voltage and breakdown phenomenon,
3. Over voltage phenomenon & Insulation co-ordination: Natural cases of over-voltagelighting over-voltage, Traveling waves on Transmission line, Over voltage due to arching
ground, Line design based on lighting, Insulation co-ordination & over voltage protection,
Magnetic surge crest ammeter, Klydonograph, Fulcharnograph, Oscillograph, surge absorber,
ground and counter-poise wires, lightning arrestors etc.
4. High voltage generation: Generation of high voltage DC voltage multiplier circuit,
Generation of A.C. high voltage cascade transformers & resonant transformers, Generation
of Impulse voltage Multistage Impulse generator method (Marx Circuit),Generation of
Impulse current, Van-de-graph generator.
5. Measurement of High voltage & currents: Measurement of high D.C. voltage- Generating
voltmeter, Measurement of A.C. voltage- Electrostatic voltmeter, sphere gaps, Measurement
of A.C. high frequency Impulse voltage- peak voltmeters, sphere gaps, Measurement of DC
current Hall generator, Measurement of AC current- current transformer, Measurement of
Impulse currents- CRO.
6. High voltage Equipments: Bushing - classification, construction & application breakdown
of Design, Guard Ring and shields, High voltage Bus-bar-Introduction, High voltage cables
Introduction.
7. High voltage Testing and testing techniques: Testing of over head line insulator, Testing of
cable, Testing of Bushing, Testing of power transformer, Testing of circuit breakers and
Isolators, Measurement of Resistivity, Dielectric constant and loss factor, High voltage
Schering bridge, Testing of surge Arrestors.
8. Design, planning and layout of high voltage laboratory: Testing facility, activities of a
H.V. Laboratory, Planning, clearance and layouts, Test equipment and layout, Safety
measures, Grounding techniques of H.V. Impulse laboratory.
9. Introduction to EHV. System & EHV lines: Effect of corona on EHV line, Lightning and
lightning protection
Reference books:
S. N.

Author
M.S. Naidu and V.
Kamaraju,

Name of Book

Publisher

High voltage Engineering

Tata McGraw Hill, 2nd Edition

2.

C.L. Wadhwa,

High voltage Engineering

New Age.

3.

M. Khalifa,

H. V. Engineering- Theory
and Practice

Marcel Dekker Inc.

1.

4.

Rakesh Das
Begamudre,

Extra High Voltage A.C.

Transmission Engg

New Age

5.

Prof. D.V. Razevig,

High Voltage Engineering

Khanna Publishers.

6.

Sunil S. Rao,

Switchgear and Protection

Khanna Publishers.

-x-x-x-x-x-x-x-x-

EE1422

FLEXIBLE AC TRANSMISSION SYSTEM

Departmental Elective I

Electrical Engineering Branch

Concepts of reactive power support and voltage stability, compensation at a bus and over a line.
Synchronous condenser, static var compensation, static phase shifter, thyristor controlled switched
capacitor, STATCONs and DVRs, Unified Power Flow Controller, Inter-line Power Flow Controller.
Reactive power balance over a network and optimization.
Reference books:
SN

Author

Name of Book

1. N. Hingorani

Publisher
IEEE
Press

Understanding FACTS

2. Yong Hua Song & Allan T Jones

Flexible AC transmission systems (FACTS)

-x-x-x-x-x-x-

EE 1423

HIGH POWER SEMICONDUCTOR DEVICES

L T P C

Departmental Elective II

3 0 0 6

Electrical Engineering Branch

1. Power semiconductor devices: PNPN diodes, DIACS, Thyristors, TRIACS, GTO devices.
Power transistors, Power MOSFET. Rating, Losses and Cooling. Triggering circuits for
SCRs, UJT. Blocking Oscillators, Schmitt trigger circuits Power MOS gate drive
circuits.Uncontrolled and controlled Rectifiers: Single phase and polyphase Bridge rectifiers.
Transformer ratings. Inductive load, free wheeling diodes.
2. Converter operation: Overlap, power factor, inversion, regulation, P-pulse converters,
power factor control via PWM converters.
3. D.C. line commutation: Series and parallel capacitor turn off, resonant turn off, impulse
commutation. AC Voltage Controllers / Regulators. D.C. Choppers: Principles, classification,
use.
4. Frequency conversion: Cycloconverter - single and three phase circuits, blocked Group
operation, circulating current mode. Single phase and three phase inverters, constant voltage
source and constant current source inverters, HF inverters for heating. Application: D.C. and
A.C. drives, SMPS, Resonant converters, AC Line Filters, ratio, interference suppression.
HDVC transmission.
Reference Books

S. N.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.

Author
Lauder C W
Sen P C
Rashid M H
Dubey S K
Singh M D &
Khanchandni
Mohan N, Underland T
M & Robbins W P
Bose B K
Dubey G.K
Subramanyam
Sugandhi

Name of Book
Power Electronics
Power Electronics
Power Electronics
Thysistorised Power Controller
Power Electronics

Publisher
MHI, 3rd Edn
TMH
PHI Pub
John Wiley & Sons
TMH Pub

Power Electronics

John Wiley & Sons

Modern Power Electronics

Thyristorised Power Controllers
Power Electronics
Thyristors: Theory & Applications

Jaico Pub. House

New Age International
New Age International
New Age International

-x-x-x-x-x-x-

EE1424

HIGHER CONTROL SYSTEM

L T P C

Departmental Elective I

3 0 0 6

Electrical Engineering Branch

Optimal Control: Introduction; Calculus of variation; Pontryaginss maximum principle; time and
fuel-optional control; Quadratic regulator problem; Matrix Riccati equation; Hamilton-Jacobi
equation; Dynamic programming; Optimal control of discrete time systems.
Adaptive Control: Introduction; Relevance of adaptive control in the real world; Gain Scheduling;
Model Reference and Self-tuning techniques;
Self-tuning control: The minimum variance controller; Stability consideration; Input tracking; Selftuning control with weighted input and output variables.
Model Reference adaptive systems (MRAS): Adaptation by gradient methods: Meyer-KalmanYalubovich Lemma; Stable adaptation based on hyper-stability concepts; Relationship between selftuning controller and MRAS based on hyper-stability theory; Application.
Real Time System Design: Suvervisory and control function in a system; Centralized, Hierarchical
and Decentralised control structure; Energy control concept; Computer configuration; man-machines
interface; data acquisition system.
Fault Detection and Diagnosis of Dynamical System: Introduction; Concept of faults; classification
of faults; Hardware and Software redundancy; Performance of Fault Detector.
Hardware Redundancy: Advantages and disadvantages; detection, diagnosis and accommodation.
Analytical Redundancy: Basic principle; residual generation; Parity space approach; Observer based
approach; Parameter estimation based approach; Structural residual generation; directional residual
generation; Detection and Diagnosis.
Design of Detector: Use of statistical approaches.
Electronic Instrumentation System Design: Overview of Electronic Instrumentation systems in
Automation of Industrial process, Typical case study, Design of new systems;

Reference books:
S. N.
1.
2.

Author
Gopal, M.

Name of Book
Digital Control and State Variable Methods

Publisher
THM

Athans, M &

Optimal Control

McGraw Hill

Falls, P.L.
3.

Gopal, M.

Modern Control Theory

Wiley Eastern

4.

Derusso, P M; Roy,

State Variables for Engineers

Wiley & Sons.

R. L. & Cloge, C. M.
-x-x-x-x-x-xEE 1425

ELECTRICAL ENGINEERING MATERIALS

L T P C

Departmental Elective II

3 0 0 6

Electrical Engineering Branch

1. Dielectrics: Dielectric properties of insulators in static fields. The static dielecric constant.
Polarization and dielectric constant. Dielectric constant of monatomic gases and polyatomic
molecules. Internal fields in solids and liquids. Ferroelectric materials, spontaneous
polarization, piezoelectricity
2. Behaviour of dielectrics in alternating fields: Frequency dependence of the electronic
polarizability. Ionic polarization as a function of frequency. Complex dielectric constant of
non-dipolar solids. Dipolar relaxation. Dielectric losses. Dielectric gases. Liquid insulating
materials. Solid insulating materials. Films.
3. Magnetic Properties of materials: Magnetic dipole moment of current loop. Magnetisation
from a macroscopic viewpoint. Orbital magnetic dipole moment and angular momentum of
two simple atomic models. Lenzs law and induced dipole moments. Classification of
magnetic materials. Diamagnetism. Origin of permanent magnetic dipole moments.
Paramagnetism,
ferromagnetic
domains,
magnetic
anisotro.
Magnetostriction,
antiferromagnetism, ferromagnetism, magnetic materials for electrical devices.
4. Conductors: Free electron theory of metals, Ohms law, relaxation time, collision time and
mean free path. Electron scattering and the resistivity of metals. Heating effect of current,
thermal superconductivity.
5. Properties of Semiconductors: Electron-hole concentration, Fermi level, Generation and
recombination, carrier life-time, diffusion length. Scattering and mobility of carriers. Einstein
relation. LASER.
6. Conducting materials: High conductive materials-copper, Aluminium, Tungsten, Nickel,
Brass, Bronze and other alloys; contact materials-Murcurry, other alloys; High resistivity
materials-carbon, graphite, Nichrome; Fuses.
7. Insulating materials: Gaseous materials-Oxide gases, electronegative gases, hydrocarbon
gases; Liquid materials-mineral oils, silicon liquids, hydrocarbon liquids; Solid materialsPaper and boards, Resins (Polymers), Rubbers-natural and synthetic, glass, ceramics,
asbestos.

Reference Books:

S. N.

Author

Name of Book
A course in Electrical Engineering
Materils

Publisher

1.

S.P. Seth, P.V. Gupta

Dhanpat Rai & Sons

2.

A.J. Dekker

Electrical Engineering Materials

PHI.

3.

Ian P. Jones

Materials Science for Electrical &

Electronics Engineers

Oxford

4.

L. Solymar & D. Walsh

Electrical Properties of Materials

Oxford

5.

J.K. Shackelford & M.K.

Muralidhara

Introduction to material science for

engineers

Pearson Education

-x-x-x-x-x-x-xEE 1426

SMART GRID
Departmental Elective V

L T P C
3

1. Basic Power Systems: Load Modeling and generation systems for conventional and
restructured power system. Power Flow Analysis.
2. Renewable Generation: Renewable Resources: Wind and Solar, Micro-grid Architecture,
Distributed Storage and Reserves, Dealing with short term variations, stochastic models based
on price forecasting.
3. Power System Economics: Power system generation economics, Modeling of Consumers
and producers, Electricity market structures, Marginal price, Optimal Power Flows,
Distribution systems basics under new environment etc.
4. Smart Grid: Definition, Various components, Application and standards, Impacts of Smart
Grid on reliability, Impacts of Smart Grid on air pollutant emissions reduction.
5. Smart Grid Communications: Two-way Digital Communications Paradigm, Network
Architectures, IP-based Systems Power Line Communications, Advanced Metering
Infrastructure.
6. Demand Side Management: Definition, Applications, Load characteristics, load curve and
load duration curve, Energy Consumption Scheduling, Controllable Load Models, Dynamics,
and Challenges, Plug-in-hybrid Vehicles and smart appliances.
7. Wide Area Measurement: Sensor Networks, Phasor Measurement Units, Communications
Infrastructure, Fault Detection and Self-Healing Systems, Applications and Challenges.
8. Security and Privacy: Cyber Security Challenges in Smart Grid, Load Altering Attacks,
False Data Injection Attacks, Defense Mechanisms, Privacy Challenges.
Reference:
S. N.

Author

Name of Book

Publisher

1.

D.S. Kirshen

Fundamentals of Power System Economics

John Wiley & Sons

2.

A. J. Wood, B. F.
Wollenberg

Power Generation Operation and Control

John Wiley & Sons

3.

G. M. Masters

4.

S. Stoft

5.

A.Mazer

Renewable and Efficient Electric Power

Systems
Power System Economics: Designing
Markets for Electricity
Electric Power Planning for Regulated and
Deregulated Markets

John Wiley & Sons

Wiley-Interscience
John Wiley & Sons

-x-x-x-x-x-x-x-

EE1427

INDUSTRIAL MANAGEMENT

Departmental Elective I

Electrical Engineering Branch

1. Industrial Engineering: Concept and evolution of I. E. theory and practice. Its role and
application, time and motion study techniques, workplace layout, stop watch time study,
worksampling, therbligs.
2. Project management: Network Techniques, PERT, CPM, Crashing.
3. Management: Functions of management, evolution of management thoughts, School of
management, Modern management theories, MIS.
4. Organization: Organizational Structure, types, company formations, features of various
ownerships, principle of authority, span of control.
5. Material management:
techniques.

Historic approach, material functions, inventory policies, VED

6. Production planning and control:

forecasting techniques.

Functions and roles, value analysis, production

7. Quality Control: Quality and reliability, SQC, acceptance sampling, TQM concept.
8. Plant maintenance: Preventive, productive, breakdown and scheduled maintenance,
maintainability, TPM concept.
9. Human Resource management: Introduction, Theories and evolution, natures and functions
of human resource management, Human resource planning, recruitment, selection and
induction.
Reference books:
S. N.
1.
2.
3.
4.
5.
6.

Author
Khanna, O.P.

Name of Book
Industrial Engg and management

Hicks, Phillips

Industrial Engg and management

Prasad, L.M.

Principles and practice of

management

Publisher
Dhanpat Rai & Sons

S. Chand & Sons

Koontz, H & Weitirich, H. Essentials of Management

McGraw Hill

Beardwell & Holden

Human resource management

McMillan India

Besterfield

Total Quality management

LPE

-x-x-x-x-x-x-x-

EE1431

COMPUTER APPLICATIONS IN POWER SYSTEM

Departmental Elective I

Electrical Engineering Branch

1. Elementary linear graph theory: Incidence and network matrices. Calculation of Z-Bus, YBus, Z-Loop by singular and non-singular transformations. Algorithm for the calculation of
Z-Bus of singular and three phase network. Short circuit studies using Z-Bus, Y-Bus.
2. Different methods of solution of Linear and non-linear algebraic equations: GaussScidel, Gront relaxation, Newton-Raphson and iterative methods. Load flow studies by
different methods, solution of the swing equations. Representation of off-load and on-load tap
changing and phase-shifting transformers for the purpose of load flow studies.
3. Central Computer Control and Protection: Data collection and manipulation, supervisory
control relay target logging, state estimation program, Operating procedure recommendations,
automatic fault study and relay setting, power system stability monitoring, corrective action
for stability problem.
4. Automatic generation control, economic dispatch, generation schedule, optimum unit
commitment interchange negotiation, volt/ VAR dispatch, weather forecast analysis, load
forecast future, evaluation of proposed operation, system security, load flow calculations,
environmental monitoring.
Reference books:
1.

SN

Author
Stagg and Al Albiad

Name of Book
Computer Application in Power System

Publisher
McGraw Hill

2.

M.A. Pai.

Computer Techniques in Power System Analysis

TMH

3.

Wood and Wollenberg

Power generation and Control

John Williey

4.

George L. Kusic

Computer aided power system analysis

PHI

-x-x-x-x-xEE1433

INTELLIGENT ALGORITHMS FOR POWER SYSTEMS

Elective III & IV

L T P C
3 0 0 6

Electrical Engineering Branch

Introduction to Artificial Neural Networks (ANNs), multilayer feed-forward networks, backpropagation training algorithm, radial basis function and recurrent networks. ANN based algorithms
for load flow analysis, economic load dispatch, load forecasting, transient stability, and power system
stabilizers. Introduction to genetic algorithms, Application of genetic algorithms for power system
optimization.

Reference books:
S. N.

Author

Name of Book

Publisher

1.

Stamatios V.
Kartalopoulos

Understanding Neural Networks and

Fuzzy Logic

IEEE Press

2.

Simon Haykin

Neural Networks

Pearson Education Asia

3.

L. Davis

Handbook of Genetic Algorithms

Van Nostrand Reinhold

4.

M. M. Gupta

Intelligent Control System

IEEE Press

-x-x-x-x-x-

EE1434

ADVANCED POWER ELECRONICS AND DEVICES

Departmental Elective I

Electrical Engineering Branch

Resonant DC DC converters: operation, characteristics, design equations, control techniques and
application; SMPS: Forward, flyback, push pull operation, characteristics, design and control
techniques; Current controlled PWM; Voltage source inverters Bang-bang, SPWM and space vector
modulation techniques; Resonant DC link voltage source inverters operation characteristics, design
and control; Non drive applications of power electronic inverters: UPS, induction heating, metal
cutting, active power line conditioning; Drive application of inverters: Vector controlled and slip
power controlled induction motor drive, self controlled synchronous motor drive constant power
factor and constant margin angle control; Permanent magnet synchronous motor drive, stepper motor
drive and switched reluctance motor drive; Application of microprocessor, PC and DSP in machine
drives example with DC motor drive.

EE1435

POWER ELECTRONIC CONTROL OF AC DRIVES

Departmental Elective IV
Electrical Engineering Branch

Objective of the Course:

To impart knowledge on operation and performance of I.M., Synchronous motors and Brushless DC
motor and their speed control techniques.
UNIT 1
AC Machines for Drives:
Induction Machines- torque production equivalent circuit analysis; speed torque characteristics with
variable voltage operation, variable frequency operation, constant v/f operation
variable stator current operation
Induction motor characteristics in constant torque and field weakening regions.

UNIT II
Control and Estimation of Induction Motor Drives
Scalar control:
- voltage fed inverter control- open-loop volts/Hz control-speed control slip regulation, speed
control with torque and flux control, current controlled voltage fed inverter drive
- current fed inverter control: independent current and frequency control, speed and flux control
in currentfed inverter drive, Volts /Hz control of current-fed inverter drive ,
- Slip power recovery drives static Kramer Drive Phasor diagram- torque expression speed
control of Kramer Drive Static Scheribus Drive modes of operation.
UNIT III
Vector or Field Oriented Control of Induction motor drives:
DC Drive Analogy-Principles of Vector control
- vector control methods
- direct vector control
- Indirect vector control.
UNIT IV
Control and Estimation of synchronous motor drives:
- Synchronous motor and its characteristics
- Control strategies constant torque angle control, unity power factor control, constant mutual
flux linkage control - Flux weakening operation maximum speed direct flux weakening
algorithm constant torque mode controller flux weakening controller indirect flux
weakening maximum permissible torque speed control scheme implementation strategy
speed controller design.
UNIT V
Brushless DC motor drives:
Three-phase full wave brush less dc motor
sinusoidal type of brush less dc motor
Current controlled blushless dc motor servo drive.
Reference Books:
SN
1.
2.
3.
4.
5.
6.

Author
B.K. Bose
R. Krishnan
B.K. Bose
M.H. Rashid
G.K. Dubey
B.K. Bose

EE1436

Title
Modern Power Electronics and AC drives
Electric motor drives Modeling, Analysis and Control
Power Electronics and AC drives
Power electronic circuits, Devices and applications
Fundamentals of Electrical drives
Power Electronics and Variable frequency drives

Advanced Engineering Mathematics

Open Elective II

Publisher
Pearson publications
Pearson Publications
Prentice Hall
PHI
Narosa publications
IEEE Press Standard
publications, 1st Edn,
L T P

3 0

Electrical Engineering Branch

1. Linear Algebra: Matrices, Vector spaces over R and C, linear dependence and independence,
subspaces, bases, Linear transformations, rank and nullity, matrix of a linear transformation.

2.

3.
4.

5.

6.
7.

Inverse and Pseudo-inverse, Eigen values & Eigen vectors. Principle Component Analysis
and Their significance and Application in Signal Processing and control.
Complex variable: Derivation of Couchy-Rieman conditions, Equations, Poles & Zeroes,
Mapping. Residue calculus technique, Contour integration technique. Conformal Mapping
Application to Nyquist criteria. Evaluation of series using contour integration.
Calculus: Riemann's definition of definite integrals; Indefinite integrals; Infinite and
improper integrals; Double and triple integrals (evaluation of Areas Volumes.)
Vector Analysis: Scalar and vector fields, differentiation of vector field of a scalar variable;
Gradient, divergence and curl in Cartesian, cylindrical, Sperical and curvilinear coordinates;
Higher order derivatives; Gauss and Stokes theorems, Greens identities. Applications to
Electromagnetism.
Linear Programming: Linear programming problems, basic solution, basic feasible solution
and optimal solution; Graphical method and simplex method of solutions; Duality.
Transportation and assignment problems.
Transform Calculus: Fourier Transform, Fourier Analysis and Laplace Transform And Their
Application
PDE: Family of surfaces in three dimensions and formulation of partial differential equations;
Solution of quasi-linear partial differential equations of the first order. Linear partial
differential equations of the second order with constant coefficients, canonical form; Solution
of Wave Equation, Heat equation, Laplace equation by Laplace and Fourier Transform
Method

Reference Books:
S. N.
1.
2.
3.
4.

Author

Name of Book

Publisher

Krysig

Advanced Engineering Mathematics

Willy Publication

M D Singhania

Differential Equation

S Chand

K B Dutta

Linear Algebra

LPE

Murry R Spigel

Vector Analysis

Schaum Publications

-x-x-x-x-x-xEE1437

INTEGRATED CIRCUITS AND VLSI DESIGN

Departmental Elective I

T P

Electrical Engineering Branch

MOS transistor (enhancement and depletion). Basic inverter in NMOS and CMOS technology, E/D
logic. Gates in NMOS and CMOS technology. Pass transistor. Introduction to NMOS and CMOS
design methodology. Design rules, stick diagrams, poly-cell and gate array approaches. Examples of
cell design. Software tools for design. Circuit and logic simulation. Layout generation and
verification.
-x-x-x-x-x-

EE 1441

Restructured Electrical Power System

Departmental Elective IV

L T P C
3

1. Overview of key issues in electric utilities restructuring: Introduction, restructuring

models, independent system operator, power exchange, market operations, market power,
stranded costs, transmission pricing , congestion pricing, management of inter zonal/ intra
zonal congestion
2. Open Access Same Time Information System: Introduction, structure of OASIS,
implementation of OASIS phases, posting of information, transfer capability of OASIS,
transmission services, methodologies to calculate ATC, experience with OASIS in some
restructuring models.
3. Tagging Electricity Transactions: Introduction, definitionof tagging, historical background
on tagging, how does a tagging process work? Identifytags, dataelements of a tag,
communication during failure recovery, transaction states, implementations, curtailment and
cancellation of transactions.
4. Electric energy trading: Introduction, essences of electric energy trading, energy trading
framework, derivative instruments of energy trading, portfolio Management, energy trading
hubs, brokers in electricity trading, green power trading,.
5. Hedging tools for managing risk in electricity markets: Introduction, risk, definition of
hedge, sources of electricity market risks, value at Risk, counterparty risk, risk evaluation in
electricity trading, hedging weather risk.
Books:
SN

Author
Wood A and
Wollenberg B

Name of Book
Power generation, Operation and
control

Publisher
Second Edition John Wiley &
Sons Inc.

2.

A Chambers

Merchant Power: A basic Guide

Pennwell Publishers

3.

M Crew

4.

D Pilipovic

5.

Fallon W and
Turner D

Managing Energy Price

Risk Books

6.

Fusaro P

Energy Risk Management: Hedging

Strategies and Instruments for the
international Energy Markets

McGraw-Hill, New York

7.

Gellings C

Effective power marketing

Pennwell Publishers

8.

Jorion P

Value at Risk

McGraw Hill, New York

9.

Shahidehpour
M and Marwali

Maintenance Scheduling in a
Restructured Power System

Kluwer Academic Press

1.

Deregulation and Diversification of

Utilities
Energy Risk: Valuing and Managing
Energy Derivatives

Kluwer Academic Press

MC Graw-Hill

-x-x-x-x-x-x-x-

EE 1443

ELECTRIC POWER UTILISATION AND TRACTION

Elective III & IV
Electrical Engineering Branch

Part-I

L T P

1. Traction System: Classification, brief explanation, Electric Traction - Different types,

distinguishing features, advantages and disadvantages, Factors affecting final choice of
Traction system.
2. Power Supply System for Track Electrification: Different systems of track electrification,
block diagram representation, Advantages and disadvantages.
3. Power Supply Arrangement: Constituents of ac power supply system, layout and brief
description of each of the constituents, miscellaneous equipments at control posts and major
equipments at ac substation, Functions of dc traction sub-station.
4. Overhead Equipment: Various current collection system, brief description & areas of
application, Constructional details of OHE employing single catenary and supported by
swiveling type bracket assembly, Automatic weight tension and temperature compensation
scheme, Factors determining the height, span of contact wire, Types of OHE supporting
structure.
5. Traction Mechanics and its applications: Types of train services and their distinguishing
features, Train resistance, adhesion, Train movements and Energy consumption. Speed-time
curve, simplified sp-time curve; Tractive and relevant problems, multiple unit control and
metadyne control.
Part - II
6. Electric Heating: Advantages of electric heating, Different methods of electric heating, their
working principle; Brief idea about practical oven/furnace (To show the physical positions of
main components only), range of operating temp., idea about current and voltage magnitudes
used, application area, Different types of heating material electrode and their characteristics,
causes of failure of heating element, Methods of controlling the temp. in the oven/furnace,
Calculations relating to power input/output and design of main parameters of the furnace.
Part - III
7. Illumination: Classification of lamps based on the principle of operation; Different
accessories required in each case and their circuit connection, Performance comparison with
reference to lumen/watt efficiency, installation cost, length of life and quality of service,
Method of design of lighting systems with simple problem.

Reference Books:
S. N.
1.
2.

Author
H. Partab

Name of Book
Modern Electric Traction

Publisher
Dhanpat Rai & Co.P.Ltd.

H. Partab.

Art and Science of Utilization of Electrical Energy

Dhanpat Rai & Co.P.Ltd.

-x-x-x-x-xEE 1444

SMART SENSORS

L T P C

Departmental Elective III & IV

3 0 0 6

1. Smart sensors fundamentals: Basic sensor technology Sensor systems; Smart sensors
definitions;
2. Smart sensors: Characteristics; Smart sensors architectures; Smart sensors buses and
interfaces; Smart sensors software; Data acquisition methods for smart sensors; Virtual sensor
systems; Smart sensors for electrical and non-electrical variables;

3. Sensor networks architectures: Single node architecture; Multi node architectures; Design
principles; Energy efficient topologies; Wired sensor networks and wireless sensor networks;
Applications;
4. Communication protocols: Physical layer; MAC protocols; Link layer protocols;
Localization and positioning; Routing protocols; Transport layer; Data gathering and
processing: Protocols for gather information; Data processing techniques;
5. Energy management: Energy consumption of sensor nodes; Techniques for reducing
consumption and communication energy; Energy aware routing;
6. Security, reliability and fault-tolerance: Security and privacy protection; Reliability
7. support; Fault-tolerance;
8. Sensor networks standards; platforms and tools: IEEE 802.15.4 and IEEE 802.11;
Berkeley motes; Operating systems.

Reference Books
SN
1.

Author
N. V. Kirianaki, S. Y. Yurish,
N. O. Shpak V. P. Deynega

2.

H. Karl, A. Willig

3.

M. Ilyas, I. Mahgoub

Name of Book
Data Acquisition and Signal Processing
for Smart Sensors
Protocols and Architectures for Wireless
Sensor Networks
Handbook of Sensor Networks: Compact
Wireless and Wired Sensing Systems

Publisher
John Wiley
John Wiley
CRC

-x-x-x-x-x-x-

EE 1445

OPTO-ELECTRONICS AND FIBER OPTICS

L T P C

Elective IV

3 0 0 6

Electrical Engineering Department

1. Elements of Light And Solid State Physics: Wave nature of light, Polarization, Interference,
Diffraction, Light Source, review of Quantum Mechanical concept, Review of Solid State
Physics, Review of Semiconductor Physics and Semiconductor Junction Device.
2. Display Devices and Lasers: Introduction, Photo Luminescence, Cathode Luminescence,
Electro Luminescence, Injection Luminescence, Injection Luminescence, LED, Plasma
Display, Liquid Crystal Displays, Numeric Displays, Laser Emission, Absorption, Radiation,
Population Inversion, Optical Feedback, Threshold condition, Laser Modes, Classes of
Lasers, Mode Locking, laser applications.
3. Optical Detection Devices: Photo detector, Thermal detector, Photo Devices, Photo
Conductors, Photo diodes, Detector Performance.
4. Optoelectronic Modulator: Introduction, Analog and Digital Modulation, Electro-optic
modulators, Magneto Optic Devices, Acoustic devices, Optical, Switching and Logic Devices.

5. Optoelectronic Integrated Circuits: Introduction, hybrid and Monolithic Integration,

Application of Opto Electronic Integrated Circuits, Integrated transmitters and Receivers,
Guided wave devices.
6. Optical Fibers: Fiber Structures and Types, Rays and Modes Single-mode and Multimode
Fibers, Refractive Index Profiles, Graded Index Fiber Numerical Aperture, Acceptance Angle,
V-Parameter. Loss mechanisms in Fibers, Loss vs. Wavelength Plot and Its Significance
Dispersion Mechanisms in Fibers: Intermodal and Intra-modal (Chromatic) Dispersions,
Components of Intra-modal Dispersions, Dispersion vs. Wavelength Plots and Their
Significance.

Reference Books:
S. N.

Author

1.

J. Wilson and J.Haukes

2.

Pallab Bhattacharya

3.

Jasprit Singh

Name of Book
Opto Electronics An
Introduction
Semiconductor Opto
Electronic Devices
Opto Electronics As
Introduction to
materials and devices

Publisher
Prentice Hall of India Pvt. Ltd.,
New Delhi
Prentice Hall of India Pvt., Ltd.,
New Delhi
McGraw-Hill International
Edition

-x-x-x-x-x-x-

EE1446

RENEWABLE ENERGY SOURCES AND MANAGEMENT

L T P C

Elective III & IV

3 0 0 6

Electrical Engineering Branch

1. Introduction: Energy situation and renewable energy sources. Global energy scene, firewood
crisis, Indian energy scene. Nonconventional renewable energy sources, potential of
renewable energy sources.
2. Solar Radiation: Terrestrial solar radiation, measurement of solar radiation.
3. Low Temperature collectors: Flat plate collectors, optical characteristics of absorber and
cover, heat transfer and transmission losses, collector model, collector equations.
4. Applications of solar energy: Solar drying, solar distillation, solar air conditioning and
refrigeration.
5. Photo voltaic energy conversion. Solar cell, equivalent circuit diagram.
6. Bioconversion: Biomass, physical and biological thermal methods of bioconversion. Solid
fuels, ethanol, methanol, vegetable oils. Biomass fuels in IC engines. Alcohol fuels, vegetable
oils, producer gas.
7. Wind energy: Origin, direction, velocity and measurement of wind. Wind energy converters power coefficient, aerodynamic construction of rotor blade. Wind electric generators in India.
8. Other energy sources: Wave energy, tidal energy, ocean thermal energy conversion (OTEC).

9. Energy Management & Conservation: Energy management, energy surveying and auditing,
flowchart for construction of energy, audit, energy indices, heating energy characteristic,
energy output, effects of energy conservation on energy characteristic, energy saving options.
Reference books:
S. N.
1.

Author
Bansal, N.K.; Kleemann,
M & Meliss, M.

Name of Book
Renewable energy sources and conversion
Technology

Publisher
TMH

2.

Kristoferson, L.A &

Bokalders, V.

Renewable energy Technologies;

Pergamon

3.

OCallaghan, P

Energy Management

McGraw Hill

-x-x-x-x-x-x-xEE1451

DISTRIBUTION SYSTEM PLANNING AND AUTOMATION

L T P C

Elective III & IV

3 0 0 6

Electrical Engineering Branch

Configuration of distribution systems, load characteristics, distribution transformers, distribution
substation design, feeder design, voltage regulation, protection in distribution systems, SCADA,
distribution automation.

-x-x-x-x-x-x-xEE1452

DEMAND SIDE MANAGEMENT

Elective III & IV

L T P

Electrical Engineering Branch

The concepts of demand-side management (DSM) for electric utilities, DSM alternatives and goals.
End-use equipment and control, utility equipment control, energy storage, dispersed generation,
customer DSM promotions. Performance improvement equipment and system benefit/cost analysis of
DSM alternatives: issues in forecasting DSM programme impacts. Implementation of DSM
programme: pricing and incentives.

-x-x-x-x-x-xEE1453

ADVANCE ELECTRICAL MACHINES

Departmental Elective I

Electrical Engineering Branch

Elements of Generalized Theory:
Essentials of rotating electrical machines, Basic two pole machine, Transformer with a movable
secondary, Transformer and speed voltages in the armature, Krons primitive machine, Analysis of
electrical machines.

Linear Transformation in Machines:

Invariance of power, Transformation from a displaced brush axis, Transformation from three phase to
two phases, Transformation from rotating axes to stationary axes, Physical concepts of Parks
transformations, Transformed impedance matrix, How to apply generalized theory, Electrical torque,
Restrictions of the generalized theory of electrical machines.
D.C. Machines - Transient & Dynamic Performance, Transfer & Function:
Separately excited dc generators and motors, interconnection of machines, transfer function of dc
machines; dc series motor; dc shunt motor, dc compound machine; linearization techniques for small
perturbations; parallel operation of dc generators; Electric braking of dc motors.
Poly-phase Synchronous Machines
Basic synchronous machine parameters, General machine equations, transient analysis, transient
torque, sudden reactive loading and unloading, concept of synchronous machine reactances, Transient
power-angle characteristics, phasor diagrams under transient under transient and sub-transient
conditions, synchronous machine dynamics.
Poly-phase Induction Machines
Transformations, Electrical performance equations, Operation on unbalance supply voltage.
Fractional Kilowatt Motors:
Stepper motor, Hysteresis motor, Reluctance motor, Two-phase servo-motor, Printed circuit motor.

Reference books:
SN Author

Title

Publisher

1.

P.S. Bhimbra

Generalized Theory of Electrical Machines

Khanna Publishers

2.

I.G. Nagrath &

Electric Machines

TMH

Electric Motor Drives,

Pearson Education

D.P. Kothari
3.

Krishnan

Modeling, Analysis and Control

4.

B K Bose

EE 1454

Modern Power Electronics and AC Drives

Pearson Education

MODELING AND SIMULATION

L T P

Elective III & IV

All Branches
1. System Models and Role of Simulation: Basic concepts and nomenclature, Types of systemDeterministic, Stochastic, Continuous and Discrete Systems, System Simulation Uses of
simulation and its limitation, Steps in simulation studies.

2. Statistical Tool: Generation and testing of pseudorandom numbers, Random variable

generation for Uniform, Exponential, Normal and Poisson distributions, Sampling and
Estimation, Maximum likelihood estimation, Confidence interval estimation.
3. Discrete Event Simulation: Representation of time, Approach to discrete event simulation,
Queuing models Single and multiserver queues, Steady state behavior of queues, Network
of queues, Inventory System simulation, Programming languages for discrete system
simulation. GPSS, SIMSCRIPT (Brief Overview)
4. Modeling and Performance Evaluation of Computer Systems: Behavioral, Data flow and
structural modeling, Overview of Hardware, Modeling and Simulation, Simulation for
behavioral model, Evaluation of multiprocessor systems, workload characterization and
Benchmarks.
5. Continuous System Simulation: Continuous System Models Open and closed loop
systems, Models described by differential equations, Systems Dynamics, Growth and decay
models, Systems dynamics diagram, Simulations of aircraft models, Biological and
sociological systems simulation, Simulation Languages Overview CSMP.
6. Virtual Reality Modeling: Overview of Virtual Reality Modeling Language VRML 20,
Creating dynamic worlds, Integrating JavaScripts with VRML
7. Verification and Validation of Simulation Models: Goals of Model Verification and
Validation, Input data Analysis, Output analysis, Sensitivity analysis, Hypothesis testing,
Performance measures and their estimation.
Reference books:
S. N.
1.
2.
3.
4.

Author
J.E. Banks,

Name of Book
Discrete System Simulation

Publisher
Prentice Hall

G. Gordon

System Simulation

Prentice Hall India

D. Ferrari

Computer Systems Performance Evaluation,

Prentice Hall

J. Bhastav

A VHDL Primer

Prentice Hall

*************
EE1455

ILLUMINATION TECHNOLOGY
Elective III & IV

L T P

Electrical Engineering Branch

Radiation, colour, eye & vision; Different entities of illuminating systems; Light sources;
incandescent, electric discharge, fluorescent, arc lamps and lasers; Luminaries and light guides,
control of light, control circuitry and computer based lighting control.
Laws of illumination; illumination from point, line and surface sources. Photometry and
spectrophotometry; Photocells. Environment and glare. General illumination design. Interior lightingindustrial, residential, office departmental stores, indoor stadium, theater and hospitals. Exterior
lighting - flood street, aviation and transport lighting, lighting for displays and signaling-neon signs,
LED-LCD displays beacons and lighting for surveillance.

-x-x-x-x-x-x-xEE1461

POWER QUALITIES
Elective III & IV

L T P

Electrical Engineering Branch

Overview and definition of power quality PQ). Sources of pollution. International power quality
standards, and regulations, Power quality problems: rapid voltage fluctuations, voltage inbalance,
voltage and voltage swells, short duration outages. Power system harmonics: harmonic analysis,
harmonic sources static converters, transformer magnetization and non-linearities, rotating
machines, arc furnaces, fluorescent lighting. Harmonic effects within the power system, interference
with communication. Harmonic measurements. Harmonic elimination - harmonic filters.

-x-x-x-x-x-xEE 1462

Reliability and Maintainability Engineering

L T P C

Departmental Elective IV

3 0 0 6

Electrical Engineering Branch

1. Basic reliability model: The reliability function, Mean time to failure, Hazard rate function,
Bathtub curve, condition reliability.
2. Constant failure rate model: The exponential reliability function, failure modes, the two
parameter exponential distribution, poisson process, redundancy and the CFR model.
3. Time dependent failure models: The Weibull distribution, the normal distribution, the
lognormal distribution
4. Reliability of systems: Serial configuration, parallel configuration, combined series parallel
systems, system structure function, minimal cuts and minimal paths, common mode failures,
three state devices.
5. State-Dependent Systems: Markov analysis, load sharing system, standby systems, degraded
system, three state devices.
6. Physical reliability models: Covariate models, static models, dynamic models, physics of
failure models.
7. Design of reliability: Reliability specification and system measurement, reliability allocation,
design methods, failure analysis, system safety and fault tree analysis.
8. Maintainability: Analysis of downtime, the repair-time distribution, stochastic point process,
system repair time, reliability under preventive maintenance, state dependent systems with
repair.
9. Design of Maintainability: Maintenance requirement, design methods, human factors and
ergonomics, maintenance and spares provisioning, maintainability prediction and
demonstration.
10. Availability: Concept and definitions, Exponential availability model, system availability,
inspection and repair availability model, Design trade-off analysis.
Books:
S. N.
1.
2.

Author
Ascher, HG and H
Feingold
Bain L.J. and M.
Engelhardt

Name of Book

Publisher

Repair system Reliability

Marcel Dekker, New York

Statistical analysis and reliability

and life testing models

2nd ed., Marcel Dekker, New

York

3.

Bazovsky, I

Reliability theory and practice

Prentice Hall, Upper Side River,

New Jersey

-x-x-x-x-x-xEE1463

Foundation in Optimization Methods

Elective III & IV

L T P C
3

All Branches
1. Introduction: Statement of optimization problem, classification.
2. Classical Optimization Techniques: Single variable Optimization. Multivariable
optimization (with no constraints, equality constraint & inequality constraints).
3. Linear Programming: Standard form of linear programming problem, definition and
theorem, Solution of a system of Linear simultaneous equation, Simplex methods, simplex
algorithm, Two phases of simplex method, Duality in linear programming, sensitivity
analysis, transportation problem.
4. Non linear Programming: One dimensional minimization: Unimodal function, elimination
methods, Fibonacci method, Golden section method, quadratic interpolation method.
Unconstrained Optimization: Direct search method Hooke & Jeeves pattern search method.
Descent method - Fletcher-Reeves method. Constrained Optimization: Direct method Cutting plane method, Indirect method - Penalty function method both interior and exterior
method.
5. Integer Programming: Integer linear programming-graphical representation, cutting plane
method. Nonlinear programming- Integer polynomial programming.
6. Nontraditional Optimization Algorithm: Genetic Algorithm - Working principle, Difference
and similarities between GAs and traditional methods, GAs for constrained optimization.
Reference books:
S. N.
1.

Author
Rao, S.S.

Name of Book
Optimization Theory and Application

Publisher
New Age

2.

Deb, Kalyanmoy

Optimization for Engineering Design

PHI

3.

Arora, Jasbir, S.

Introduction to Optimum design

McGraw Hill

4.

Beighfler, C.S.

Foundations of Optimization

PHI

5.

Mital, K. V.

Optimization methods in Operation

Research and System Analysis

New Age

6.

Phillip & Ravindran

Operation Research

John Willey & Sons

-x-x-x-x-

EE1465

BIOMEDICAL ENGINEERING

L T P

Elective III & IV

Electrical Engineering Branch

1. Introduction to Biomedical Instrumentation: Introduction, Biometrics, physiological
systems of the body, Biomedical Transducer, Sources of bio-electric signals, propagation of
action potential, Electrodes: theory, physical sensors, chemical transducers.
2. Cardio-vascular System and Electrocardiography: The heart and cardiovascular system,
Blood pressure, The heart sound, The electrocardiography
3. Biomedical recorders: Electrocardiograph(ECG), Phonocardiograph, Electroencephalograph
(EEG), Electromyograph (EMG)
4. Implantable Bio-electric devices: Introduction, function of implantable electronic device,
Implantable electrodes and leads, Cardiac pacemaker types, working principle and
performances, Implantable electrodes and leads
5. Patient Care and monitoring: System concept and requirement, Measurement of blood:
pressure, heart beat rate, temperature and respiration, The organization of the hospital for
patient care monitoring, Defibrillators
6. Biotelemetry: Introduction, Classification and principles of biotelemetry, Ultrasound and
light telemetry, Telephonic telemetry, Implantable units, Application of telemetry in patient
care
7. Medical Imaging: Instrumentation for diagnostic X-rays, X-ray computed tomography, Basic
NMR components, Ultrasonic, imaging systems Medical ultrasound, A-SCAN,
Echocardiograph (M-mode), B-SCANNER, Biological effect of ultra sound.
8. Computers in Biomedical Instrumentation: Database management: Introduction, in-house
and commercially available systems, desirable features, specific medical application,
Computerized critical care areas: Planning and designing a computerized critical care unit,
selection of monitoring equipment, The computer in clinical laboratories, Computer in
medical research : Introduction, interacting with experimental preparations, Artificial
Intelligence : Introduction, medical applications of artificial intelligence, developing a
medical expert system.
9. Related topics: Hearing Aids Hearing fundamentals, disorders.
Reference books:
S. N.
1.
2.
3.

Author
L. Cromwell et al

Name of Book
Biomedical Instrumentation and Measurements

Publisher
Prentice Hall

R.S. Khandpur

Handbook of Biomedical Instrumentation

Tata McGraw Hill

Jacob Kline

Handbook of Biomedical Engineering

Academic Press.

*************
EE1466

Hydro-Electric Engineering
Elective III & IV

L T P C
3

Electrical Engineering Branch

Essential Features of Hydro-Electric Power Plant. Classification of Hydro-Electric Power Plants.
Hydrology, Hydrologic Cycle, Hydrograph, Flow duration curve.
Size of plant and choice of units. Types of Turbine and their characteristics. Design of Main
Dimensions of turbines. Draft tubes, types, setting and preliminary dimensions.

Pumped storage schemes. Mini and Micro Hydro Power Plants. Selection of turbine and pump
capacities, Pumping schedule. Operation and efficiency of Pumped storage schemes.
Cost evaluation of hydro-electric plant. Co-ordination of different types of Power Plant in power
system. Economic loading of hydro-power plants. Hydro-thermal mix. Types of Underground Power
Plants. Largest Underground Power Plant. Elementary idea of the use of computers in power stations.
Load dispatching. Power system security. Load forecasting. Generation allocation control. Generation
system reliability.
Reference books:
S. N.
1.

Author
G.D. Rai

Name of Book
An Introduction to Power Plant Technology

2.

G.R. Nagpal

Power Plant Engineering

3.

M.V. Deshpandey

Elements of Electrical Power Station Design

4.

Mahesh Verma

Power Plant Engineering

Publisher

-x-x-x-x-x-xEE1471

Soft Computing Techniques and Applications

Elective III & IV

L T P C
3

Electrical Engineering Branch

Introduction to soft computing, intelligent decision system, overview of soft computing techniques.
Introduction to genetic algorithm, genetic operators and parameters, genetic algorithms in problem
solving, theoretical foundations of genetic algorithms, evolutionary programming, particle swarm
optimization, differential evolution; implementation issues and applications.
Neural model and network architectures, perceptron learning, supervised hebbian learning,
backpropagation, associative learning, competitive networks, hopfield network, computing with
neural nets and applications of neural network. case-based reasoning (CBR), applications of CBR.
Introduction to fuzzy sets, operations on fuzzy sets, fuzzy relations, fuzzy measures, applications of
fuzzy set theory to different branches of science and engineering.
Matlab tutorial
Application of soft computing to control systems
Application of soft computing to decision-support systems
Application of soft computing to image processing and data compression
Application of soft computing to handwriting recognition
Application of soft computing to automotive systems and manufacturing
Application of soft computing to architecture
Application of soft computing to power systems
Fuzzy logic control
Neuro-fuzzy systems

Reference books:
SN Author
1.
D. E. Goldberg

Name of Book
Genetic Algorithms in Search,
Optimization, and Machine Learning

Publisher
Addison-Wesley

2.

Z. Michalewicz

Genetic Algorithms+ Data Structures

+ Evolution Programs

Springer-Verlag

3.

N. K. Sinha & M. M. Gupta

(Eds)

Soft Computing & Intelligent Systems:

Theory & Applications

Academic Press

4.

M.T. Hagan, H. B. Demuth,

and M. Beale

Neural Network Design

Thompson Learning

5.

S. Haykin

Neural Networks- A Comprehensive

Foundation

PHI

6.

C. Lau (Ed)

Neural Networks

IEEE Press

7.

Satish Kumar

Neural Networks- A Classroom

Approach

TMH

8.

G. J. Klir, and B. Yuan

Fuzzy Sets and Fuzzy Logic: Theory

and Applications

PH

9.

H. J. Zimmerman

Fuzzy Set Theory and Its Applications

Kluwer Academic Pr

EE 1476

DATABASE MANAGEMENT SYSTEM

L T P C

Departmental Elective

3 0 0 6

1. Introduction : Concept & Overview of DBMS, Data Models, Database Languages, Database
Administrator, Database Users, Three Schema architecture of DBMS.
2. Entity-Relationship Model: Basic concepts, Design Issues, Mapping Constraints, Keys,
Entity-Relationship Diagram, Weak Entity Sets, Extended E-R features.
3. Relational Model: Structure of relational Databases, Relational Algebra, Relational Calculus,
Extended Relational Algebra Operations, Views, Modifications Of the Database.
4. SQL and Integrity Constraints: Concept of DDL, DML, DCL. Basic Structure, Set
operations, Aggregate Functions, Null Values, Domain Constraints, Referential Integrity
Constraints, assertions, views, Nested Subqueries, Database security application development
using SQL,PL/SQL, Stored procedures and triggers, Cursors.
5. Relational Database Design: Functional Dependency, Different anomalies in designing a
Database., Normalization using functional dependencies, Decomposition, 1NF, 2NF, 3NF,
Boyce-Codd Normal Form, Nomalization using multi-valued depedencies, 4NF, 5NF, 6NF.
6. Internals of RDBMS: Physical data structures, Query optimization: join algorithm, statistics
and cost bas optimization. Transaction processing, Concurrency control & Recovery
Management: transaction model properties, state serializability, lock based protocols, two
phase locking, Deadlocks, Deadlock avoidance, Wait die & wound wait protocol.

7. File Organization & Index Structures :File & Record Concept, Placing file records on
Disk, Fixed and Variable sized Records, Types of Single-Level Index (primary, secondary,
clustering), Multilevel Indexes, Dynamic Multilevel Indexes using B tree and B+tree .
Text Books:
SN

Author
Henry F. Korth and
1.
Silberschatz Abraham
Elmasri Ramez and
2.
Novathe Shamkant

Name of Book

Publisher

Database System Concepts

Mc.Graw Hill

Fundamentals of Database Systems

Pearson Education

3. Ramakrishnan

Database Management System

McGraw-Hill

4. Gray Jim and Reuter

Transaction Processing: Concepts and

Techniques

Moragan Kauffman
Publishers

5. Jain

Advanced Database Management System

CyberTech

6. Date C. J.

Introduction to Database Management

Addison Wesley.
/Pearson Education

7. Ullman JD.

Principles of Database Systems

Galgottia Publication

-x-x-x-x-x-x-x-xEE1486

EHV TRANSMISSION
Open Elective I

L T P

Electrical Engineering Branch

1. Introduction to EHV AC Transmission: Role of EHV AC Transmission.
2. Calculation of line & Ground parameters: Resistance of conductors, Temperature rise of
conductor & current carrying capacity, Properties of bundled conductors, Inductance of EHV
line configuration, Line Capacitance calculation, Sequence inductances & capacitances, Line
parameter for modes of propagation, Resistance & Inductance of ground return.
3. Voltage gradient of conductors: Electrostatics, Field of sphere gap, Field of line charges &
properties, Change Potential relations for multiconductor lines, Surface voltage gradient on
conductors, Gradient factors & its use, Distribution of voltage gradient of subconductors of
bundle.
4. Corona Effect - 1: I2R loss & corona loss, Corona loss formulas, Charge voltage diagram &
corona loss, Attenuation of travelling waves due to corona loss, Audible noise generation &
characteristics, Limits for audible noise, AN Measurement & Meters, Formulae for audible
noise & use in design, Relation between 1 & 3 AN levels, Day-night equivalent noise
level.
5. Corona effect - 2 (Radio interference): Corona pulses, their generation & properties,
Properties of pulse trains & filter response, Limits of Radio interference fields, Frequency
spectrum of RI field of line.
6. Electrostatic field of EHV lines: Electric shock & threshold current, Effects of electrostatic
field on human, animals & plants.
7. DC Power Transmission Technology: Introduction between, Comparison between AC & DC
Transmission, Application of DC Transmission
8. Thyristor Valves: Introduction, Thyristor device, Thyristor valves, valve test.

9. Analysis of HVDC converters: Pulse number, Choice of converter configuration, Simplified

analysis of Graetz ckts, Converter bridge characteristics, Characteristics of twelve pulse
converter, detailed analysis of converters.
10. Converter & HVDC System Control: Principle of DC link control, Converter control
characteristics, System control Hierarchy, Firing angle control, Current & Extinction angle
control, Starting & stopping of DC link., Power level controllers, higher level controllers,
Telecommunication requirements.

Reference books:
S. N.
1.

Author
E.W. Kimbark

Name of Book
E.W. Transmission Vol-1

2.

Adamson & Hingrani

D.C. Transmission

3.

D.V. Rozevig.

High Voltage Engg.

EE 1485

COMPUTER ORGANISATION AND ARCHETECTURE

L T P C

Elective III

3 1 0 8

Electrical Engineering Branch

Introduction
Computers and computations, Limitations of computers, First, second and third generation of
computer families, The VLSI era: Integrated circuits, Microprocessors and Microcomputers, recent
developments.
Processor Design
Processor organization, information representation, number formats, Instruction sets: instruction
formats, instruction types, execution of instructions, Fixed point arithmetic: addition and
subtraction, multiplication, division.
Controller Design
Instruction sequencing and instruction interpretation, Hardwired control: design methods, multiplier
control unit, CPU control unit, Micro-programmed control: basic concepts, control memory
optimization, multiplier control unit.
Memory Organization
CPU memory interaction, Memory array organization and technology, Multiple module memory,
Virtual memory: Memory hierarchies, main memory allocation, segment, pages and files.
Input Output Processing
Data transfer technique, Bus interface, IO accessing and data transfer, IO interrupts, IO Channel/
Processor.
Peripheral Systems

Principles of DOT Matrix, inkjet and laser printers, Magnetic memory systems, Video display unit
and interface logic.
Introduction to Operating System
Processor Management, Memory Management, File Systems, Device Management.
A brief introduction to assembler and compiler.

Reference Books:
1. Computer Architecture and Organization

John P. Hayes

2. Computer organization and Design

3. Computer Systems Design and
Architecture
4. Computer Architecture and Parallel
Processing

P. Pal Chaudhuri
V. P. Heuring and
H.F.Jordan
Kai Hwang and F.A.
Briggs

McGraw-Hill
I.E.
PHI
Addison
Wesley.
McGraw-Hill
I.E.

-x-x-x-x-x-xEE1484

INTELLIGENT AND KNOWLEDGE BASED SYSTEMS

Departmental Elective V

L T P C
3 0 0 6

All Branches
Problem solving: state space representation, problem reduction, constraint satisfaction networks.
Heuristics. Knowledge Representation, Predicate calculus, resolution-refutation, Prolog. Rule based
systems: forward and backward chaining. Handling of uncertainty: probabilistic techniques, fuzzy
logic. Reasoning with incomplete information: non-monotonic reasoning. Elements of temporal logic.
Diagnostic reasoning. Structured Knowledge Representation Schemes: Semantic networks, Frames,
Inheritance and default reasoning. Expert Systems: Architecture of the expert systems. Expert system
shells. Knowledge acquisition. Consistency of the knowledge base. Case studies. Distributed AI and
agent based systems.
Reference books:
S. N.
1.
2.

Author
H. J. Zimmerman
G. J. Klir

Name of Book
Fuzzy Set Theory and its Applications
Fuzzy Sets and Fuzzy Logic

-x-x-x-x-x-x-x-x-

Publisher
Kluwer Acad Publisher
PHI