Wouxun KG UV8D Menu Definitions

Wouxun KG-UV8D

Menu Definitions

Frequency Step
2.5* / 5 / 6.25 / 10 /

- Amount of frequency change when using Up/Down arrows or

12.5 / 25 / 50 / 100 kHz

when scanning in VFO Mode.

Note: 2.5kHz not available on V1.01 *

0>9
2 SQL-LE
Squelch Level

- Squelch silences the receiver when there is no signal.

OFF / ON
3 SAVE
Battery Save

- Receiver goes into a sleeping mode until a signal is detected.

4 TXP

Transmit Power
High 5W/4W

- VHF High = 5 watts Low = 1 watt

Low 1W

- UHF High = 4 watts Low = 1 watt

OFF /
5 ROGER
Prompt at beginning/end of transmission

- BOT Prompt at Beginning of each transmission.

BOT / EOT /

- END Prompt at End of transmission

BOTH

- BOTH Prompt at Beginning and End of transmission

15 / 30 > 600secs
6 TOT
Transmission Time Out Timer

- Transmit Times Out after pre-selected time.

- Radio will alert you when the time is up.

- This helps prevent overheating.

OFF /
7 VOX

Voice Operated Xmtr

- Allows transmitter activation by talking only.

1, 2 > 9

- Adjust VOX gain to allow smooth operation.

- Level 10 requires the strongest voice.

WIDE / NARR
8 WN

Wideband / Narrowband

- Wide = 5 KHz Narrow = 2.5 KHz

- For Ham use, start with selecting Wide.

OFF /
9 VOICE
Voice Prompt

- Audible confirmation of a keypad entry.

ENG / CHI

10 TOA
Transmit Overtime Alarm (TOA)
OFF /

- Beep tone and LCD flashes X seconds before timeout setting.

1, 2 > 10

11 BEEP
Keypad Beep
OFF / ON

- Allows audible confirmation of a key press and audible

warnings.

CHINESE / ENGLISH
12 LANGUAGE Display Language

Chinese / English

13 BCL
Busy Channel Lockout
OFF / ON

- Prevents transmitting on a busy frequency.

- If another repeater or signal is present using a different CTCSS

or DCS code, your transmitter will be 'locked out' to prevent
interference.
When PTT is keyed, radio will sound a Beep Tone.

US Sales and

Warranty Support

1 STEP

http://www.miklor.com/UV8D/UV8D-MenuDef.php[23/04/2015 14:59:56]

Wouxun
KG-UV8D

Blackbird

J-Pole

Handheld
Radios

Programming
Cables

POUCHES

Please

Support
Miklor

US Sales and

Warranty Support

Wouxun KG UV8D Menu Definitions

14 SC-REV

15 R-CTC

16 T-CTC

17 R-DCS

18 T-DCS

19 PF1-KEY

20 PF3-KEY

21 CH-MDF

22 ABR

23 OFFSET

24 SFT-D

25 SECOND

Scan Resume Method

TO / CO / SE

TO (Time Operation) Scan stops when signal detected.

Scan resumes after 5 seconds.

CO (Carrier Operation) Scan stops when signal detected.

Scan resumes 3 seconds after signal disappears.

SE (Search Operation) Scan stops when signal detected.

Scanning will not resume.

OFF /

Rec -Continuous Tone Coded Squelch

- Prevents interference from signals on the same frequency.

67.0 Hz > 254.1 Hz

- The squelch will open only if the incoming signal is coded with
the same tone required by your receiver.

- Note: Not all repeaters requiring a tone for access transmit a

tone back to you.

- Leave this function turned OFF unless you are absolutely sure
it is needed.

OFF /

Trans - Continuous Tone Coded Squelch

- Required by some networks to limit access and interference.

67.0 Hz > 254.1 Hz

Rec - Digital Coded Squelch

OFF /

- Prevents interference from signals on the same frequency.

D023N > D754I

- The squelch will open only if the incoming signal is coded with
the same tone required by your receiver.

- Note: Not all repeaters requiring a tone for access transmit a

tone back to you. Leave this function turned OFF unless you are
absolutely sure it is needed.

OFF /
Trans - Digital Coded Squelch

- Required by some networks to limit access and interference.

D023N > D754I

PF1 Side Key

CALL / VFTX

- CALL: Selective Call

- VFTX: Transmission on Sub-Frequency

PF3 Side Key

SCAN

- SCAN: Activate Scan

LAMP

- LAMP: Turn On Lamp

Tele Alarm

- Tele Alarm: Remote Alarm

SOS-CH

- SOS-CH: SOS Function

RADIO

- RADIO: Turn On FM Radio

Disable

- Disable: Inactive

FREQ or CHAN

Transceiver has 2 Working Modes

- 1) Frequency Mode (FREQ)

- 2) Channel Mode (3 channel modes available)

Channel (CH)

Frequency + Channel Number (CH FREQ)

Channel Name (NAME)

Always ON

Automatic Backlight Timer

- Always ON

1 > 20 seconds

- Backlight Timer 1 > 20 seconds

0 > 599.995 MHz

Offset Frequency

- 0 to 599.995MHz

Frequency Shift Direction

+ - OFF
+ Possitive Direction

- Negative Direction

OFF No frequency shift

OFF / ON

Stopwatch Timer

- ON Activate

http://www.miklor.com/UV8D/UV8D-MenuDef.php[23/04/2015 14:59:56]

Wouxun
KG-UV8D

Blackbird

J-Pole

Handheld
Radios

Programming
Cables

POUCHES

Please

Support
Miklor

US Sales and

Warranty Support

Wouxun KG UV8D Menu Definitions

26 CHNAME

27 MEM-CH

28 DEL-CH

29 SC-CTC

30 SC-DCS

31 SP-MUTE

32 ANI-SW

33 ANI-EDIT

34 DTMFST

35 AUTOLK

36 PRICH-SW

37 RPT-SET

38 RPT-SPK

39 RPT-PTT

- OFF Deactivate

Channel Name
A-Z 0-9

- Composed of 26 letters (A-Z) and 10 numbers (0-9)

- 8 characters max

Memory Channel
1-999

- 999 Channels Available

Channel Delete
1-999

- 999 Channels Available

CTCSS Scanning
SCANNING

- In receive mode, press MENU to activate CTCSS Scanning

DCS Scanning
SCANNING

- In receive mode, press MENU to activate DCS Scanning

Mute Settings
QT*DTMF

- There are 3 Squelch Settings

QT+DTMF

QT*DTMF, QT+DTMF, QT

QT

OFF / ON

Caller ID Transmission Settings

- ON: Activate

- OFF: Deactivate

100 > 999999

Automatic Keypad Lock

- Individual Caller IDs can be chosen within the range

100 > 999999

- Cannot begin with 0 (zero)

DTMF Sidetone Settings

DT-ST

- DT-ST Keypad Sidetone activated when transmitting

ANI-ST

- ANI-ST Caller ID Sidetone activated when transmitting

DT-ANI

- DT-ANI Caller ID and Keypad sidetones activated when

OFF
transmitting.

- OFF Deactivate ALL

OFF / ON

Automatic Keypad Lock

- When ON, keypad will be locked if not used in 15 seconds.

- Pressing the [# LOCK] key for 2 seconds will Lock/Unlock the

keys on the keypad.

OFF / ON

Priority Channel Switch

- ON Activate

- OFF Deactivate

X-DIRPT

Repeater Settings

- X-DIRPT Directional Cross Band Repeat

X-TWRPT

- X-TWRPT 2-way Cross Band Repeat

OFF / ON

Repeater Speaker Switch

- ON Speaker Active when repeating

- OFF Speaker Inactive when repeating

OFF / ON

Repeater PTT Switch

- ON PTT transmission activated when repeating

http://www.miklor.com/UV8D/UV8D-MenuDef.php[23/04/2015 14:59:56]

Wouxun
KG-UV8D

Blackbird

J-Pole

Handheld
Radios

Programming
Cables

POUCHES

Please

Support
Miklor

US Sales and

Warranty Support

Wouxun KG UV8D Menu Definitions

- OFF PTT transmission blocked when repeating

40 SCAN-ADD
Scan Channel Add
OFF / ON

- ON When scanning channels, they will be added to the

scanning channels

- OFF Channels will not be added to the table when scanning

1000 Hz
41 ALERT

Single Tone Pulse Frequency

- There are 4 single tone pulse frequency options

1450 Hz

1000Hz, 1450, 1750Hz, 2100 Hz

1750 Hz

2100 Hz

100ms > 30,000ms

42 PTT-DLY

PTT ID Delay

- Delay can be set at 100ms, 200ms > 30,000ms

43 PTT-ID

Caller ID Transmission Mode

BOT

- BOT Press PTT to send Caller ID

EOT

- EOT Release PTT to send Caller ID

BOTH

- BOTH Press and Release both send Caller ID

1 > 10
44 RING

Ring Time

- 1 > 10 levels Each level = 1 second

OFF

- OFF Deactivated

Scan ALL
45 SCG-A

Scan Channel Group NO. of A Area

- Options are:

Group 1 > 10

SCAN ALL, Group 1, Group 2 > Group10

Scan ALL
46 SCG-B

Scan Channel Group NO. of B Area

- Options are:

Group 1 > 10

SCAN ALL, Group 1, Group 2 > Group10

OFF / ON
47 PRT-TONE
Repeater Receipt Tone

- ON Activate

- OFF Deactivate

ALL
48 SC-QT

Saving Scan Mode

- ALL Save both Rx and TX CTCSS/DCS

DEC

- DEC Save RX CTCSS/DCS

NEC

- NEC Save TX CTCSS/DCS

49 SMUTESET
Setting Sub-Frequency Mute
OFF

- OFF Deactivate this function

TX

- TX Deactivate volume on sub-frequency when transmitting

RX
on master frequency

TX/RX

- RX Deactivate volume on sub-frequency when receiving on

master frequency

- TX/RX Deactivate volume on sub-frequency when

transmitting and receiving on master frequency

1 > 20
50 CALLCODE
Selective Call Code Group Setting

- Selective call group: 1-20

51 RESET

Reset Setting
VFO

- VFO: Reset menu functional Parameters

ALL

- ALL: Reset all (menu and channel) functional parameters

http://www.miklor.com/UV8D/UV8D-MenuDef.php[23/04/2015 14:59:56]

Wouxun
KG-UV8D

Blackbird

J-Pole

Handheld
Radios

Programming
Cables

POUCHES

Please

Support
Miklor

Wouxun KG UV8D Menu Definitions

TOP of PAGE
Miklor Home

Back

http://www.miklor.com/UV8D/UV8D-MenuDef.php[23/04/2015 14:59:56]