Scribd
Upload
151 views

Datasheet Panel Solar

The document describes a solar module from Siemens that produces 75 watts of power. It details the materials, certifications, electrical parameters, and design features of the module. The module uses Siemens' proprietary PowerMax technology and is covered by a 25-year limited performance warranty.

Uploaded by

Candy Fabiola Salinas Chavez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
151 views

Datasheet Panel Solar

The document describes a solar module from Siemens that produces 75 watts of power. It details the materials, certifications, electrical parameters, and design features of the module. The module uses Siemens' proprietary PowerMax technology and is covered by a 25-year limited performance warranty.

Uploaded by

Candy Fabiola Salinas Chavez
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

Solar module SP75

When it comes to reliable and


environmentally-friendly generation of
electricity from sunlight, solar modules
from Siemens provide the perfect
solution. Manufactured in compliance
with the most stringent quality
standards, Siemens Solar modules are
designed to withstand the toughest
environmental conditions and are
characterized by their long service life.
Siemens Solar modules are covered by a
25-year limited warranty on power
output your guarantee of trouble-free
solar power generation.
PowerMax technology
Siemens proprietary PowerMax
technology optimizes the energy
production of individual cells and solar
modules for all types of environmental
conditions. PowerMax process
optimization includes a special refining
technique for ingots, a clean room
semiconductor grade production
process, and a multistage proprietary
TOPS (Texture Optimized Pyramidal
Surface) process. The TOPS process
incorporates the formation of textured
pyramids on the surface of the solar cell.
These pyramids are then specially
treated to passivate the surface. The
cells optical properties are optimized for
maximum absorption of photons from
the suns light. TOPS also maximizes
photon absorption from direct and
diffused light (typical under cloudy
conditions). This means that light
absorption is especially high, even at low
light levels. Siemens PowerMax solar
cells deliver maximum energy
throughout the day.
Solar module
Model:
Rated power:
Limited Warranty:

SP75
75 Watts
25 Years

Certifications and Qualifications


UL-Listing 1703
TV safety class II
JPL Specification No. 5101-161
IEC 61215
CE mark
FM Certification

Intelligent module design

Solar module SP75

All cells are electrically matched to assure the


greatest power output possible.

Electrical parameters

Ultra-clear tempered glass provides excellent light


transmission and protects from wind, hail, and
impact.
Torsion and corrosion resistant anodized
aluminum module frame ensures dependable
performance, even through harsh weather
conditions and in marine environments.

12 V/6 V

Maximum power rating Pmax

[Wp] 1)

75

Rated current IMPP

[A]

4.4/8.8

Rated voltage VMPP

[V]

17.0/8.5

Short circuit current ISC

[A]

4.8/9.6

Open circuit voltage VOC

[V]

21.7/10.9

Thermal parameters

High quality
Every module is subject to final factory review,
inspection and testing to assure compliance with
electrical, mechanical and visual criteria.

NOCT 2)

Temp. coefficient: short-circuit current

2.06 mA / C

Temp. coefficient: open-circuit voltage

-.077 V / C

Qualification test parameters 4)


Temperature cycling range
[C]

36 PowerMax single-crystalline solar cells deliver


excellent performance even in reduced-light or
poor weather conditions.

Humidity freeze, Damp heat

Cell surfaces are treated with the Texture


Optimized Pyramidal Surface (TOPS) process to
generate more energy from available light.

Wind Loading
Maximum distortion

PSF

Durable back sheet provides the module


underside with protection from scratching, cuts,
breakage, and most environmental conditions.

85

[V]

600 V per UL (1000 V per ISPRA)

[N/m2]

50 [2400]

[]

1.2

3)

Hailstone impact

Inches [mm]

1.0 [25]

Weight

MPH
[m/s]
Pounds [kg]

52 [v=23]
16.7 [7.6]
Voltage-current characteristic

1) Wp (Watt peak) = Peak power


(Minimum Wp = 70 Watts)

2)

Laboratory tested and certified for a wide range of


operating conditions.
Ground continuity of 1 ohm for all metallic
surfaces.

-40 to +85

[%RH]

Maximum system voltage

Fault tolerant multi-redundant contacts on front


and back of each cell provide superior reliability.
Solar cells are laminated between a multi-layered
polymer backsheet and layers of ethylene vinyl
acetate (EVA) for environmental protection,
moisture resistance, and electrical isolation.

3)
4)
5)

Air Mass
AM = 1.5
Irradiance
E = 1000 W/m2
Cell temperature
Tc = 25 C
Normal Operating Cell Temperature at:
Irradiance
E = 800 W/m2
Ambient temperature Tu = 20 C
Wind Speed
vw = 1 m/s
Diagonal lifting of module plane
Per IEC 61215 test requirements
12 volt configuration

Voltage (volts)

Manufactured to exacting Siemens quality


standards.

Easy installation

+
_2

45

[C]

Current (amps)

Built-in bypass diodes (12V configuration) help


system performance during partial shadowing.

Module dimensions

ProCharger-CR junction box accepts conduit,


cable or wire and is designed for easy field wiring.

ProCharger-CR
Junction-box
Maximum cable
diameter: 4mm2
Type of protection: IP44

Lightweight aluminum frame and pre-drilled


mounting holes for easy installation.
Factory configured for 12V operation and may be
reconfigured in the field for 6V operation.

Your address for photovoltaics from Siemens Solar

Modules may be wired together in series or


parallel to attain required power levels.

Performance warranty
25 Year limited warranty on power output.

Hole Diameter 0.26 inch (6.6mm)


Mounting hole dimensions are center to center

Further information on solar products, systems,


principles and applications is available in the
Siemens Solar product catalog.

Siemens modules are recyclable.

Siemens Solar 1998

Status 11/98 - Subject to modification.

Siemens Solar GmbH

Siemens Solar Industries

Siemens Showa Solar Pte. Ltd.

A joint venture of
Siemens AG and Bayernwerk AG

P.O.Box 6032
Camarillo, CA 93011, U.S.A.
Web site: www.siemenssolarpv.com
E-mail: [email protected]
Tel: 805-482-6800
Fax: 805-388-6395

166 Kallang Way


Singapore 349249
Tel: 65-842-3886
Fax 65-842-3887

Postfach 46 07 05
D-80915 Mnchen
Germany

Order No. 019897, Rev. D

You might also like